All FG 200 valves are being replaced by FG 220 valves. Piping 50mm and larger will use double eccentric valves. Painting of pipes requires two coats of red oxide primer and two coats of synthetic enamel at 50 microns per coat. Pipes will be wrapped with anti-corrosive tape and fittings 65mm and up will include hand wheels. The hydrant system drawing and specifications are updated to include longer internal hoses, an aluminum hose box with stainless steel couplings, and a higher flow monitor.
All FG 200 valves are being replaced by FG 220 valves. Piping 50mm and larger will use double eccentric valves. Painting of pipes requires two coats of red oxide primer and two coats of synthetic enamel at 50 microns per coat. Pipes will be wrapped with anti-corrosive tape and fittings 65mm and up will include hand wheels. The hydrant system drawing and specifications are updated to include longer internal hoses, an aluminum hose box with stainless steel couplings, and a higher flow monitor.
All FG 200 valves are being replaced by FG 220 valves. Piping 50mm and larger will use double eccentric valves. Painting of pipes requires two coats of red oxide primer and two coats of synthetic enamel at 50 microns per coat. Pipes will be wrapped with anti-corrosive tape and fittings 65mm and up will include hand wheels. The hydrant system drawing and specifications are updated to include longer internal hoses, an aluminum hose box with stainless steel couplings, and a higher flow monitor.
All FG 200 valves are being replaced by FG 220 valves. Piping 50mm and larger will use double eccentric valves. Painting of pipes requires two coats of red oxide primer and two coats of synthetic enamel at 50 microns per coat. Pipes will be wrapped with anti-corrosive tape and fittings 65mm and up will include hand wheels. The hydrant system drawing and specifications are updated to include longer internal hoses, an aluminum hose box with stainless steel couplings, and a higher flow monitor.
2. Gland packing should be done by PTFE 3. Valves from 50mm NB & above will be double eccentric type. 4. For painting two coat of red oxide primer & two coat of synthetic enamel with each quote of 50micron is required. 5. A Double layer of anti-corrosive tape shall be provided. 6. For painting two coat of red oxide primer & two coat of synthetic enamel with each quote of 50micron is required. 7. Hand wheel to be provided for 65mm NB & above. 8.GA Drawing of Hydrant System to be provided. 9. Internal Hose length will be 15m X 2 instead of 15m only. 10. Hose box will be made by heavy duty Aluminum checkered plate. 11.Hose box Coupling will be SS. internal hose pipe will be 15m X 2. ISI marked. 12. Monitor will be 2580 LPM instead of 1750LPM