www.DataSheet4U.

com

ST1510FX
High voltage fast-switching
NPN Power transistor

General features
■ State-of-the-art technology:
– Diffused collector “Enhanced generation”
EHVS1
■ More stable performances versus operating
temperature variation
3
■ Low base-drive requirements 2
1
■ Tighter hFE range at operating collector current
■ Fully insulated power package U.L. compliant ISOWATT218FX
■ In compliance with the 2002/93/EC European
directive

Applications
Internal schematic diagram
■ Electronic ballast for fluorescent lighting
■ Switch mode power supplies

Description
The device is manufactured using Diffused
Collector in Planar technology adopting new and
enhanced high voltage structure 1 (E.H.V.S.1).

Order codes
Part number Marking Package Packing

ST1510FX 1510FX ISOWATT218FX Tube

February 2007 Rev 2 1/10

www.st.com 10
Contents ST1510FX

Contents

1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curve) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2/10
ST1510FX Electrical ratings

1 Electrical ratings

Table 1. Absolute maximum rating

Symbol Parameter Value Unit

VCES Collector-emitter voltage (VBE = 0) 1500 V

VCEO Collector-emitter voltage (IB = 0) 750 V
VEBO Collector-base voltage (IC = 0) 9 V
IC Collector current 12 A
ICM Collector peak current (tP < 5ms) 20 A
IB Base current 6 A
PTOT Total dissipation at Tc = 25°C 62 W
Insulation withstand voltage (RMS) from all three leads to
Visol 2500 V
external heatsink
Tstg Storage temperature -65 to 150
°C
TJ Max. operating junction temperature 150

Table 2. Thermal data

Symbol Parameter Value Unit

Rthj-case Thermal resistance junction-case _______________max 2 °C/W

3/10
Electrical characteristics ST1510FX

2 Electrical characteristics

(Tcase = 25°C unless otherwise specified)

Table 3. Electrical characteristics

Symbol Parameter Test conditions Min. Typ. Max. Unit

Collector cut-off current VCE = 1500V 0.2 mA

ICES
(VBE =0) VCE = 1500V TC = 125°C 2 mA

Emitter cut-off current

IEBO VEB = 9V 1 mA
(IC =0)

Collector-emitter
VCEO(sus) (1) sustaining voltage IC = 100mA 750 V
(IB =0)

Collector-emitter
VCE(sat) (1) IC = 6A IB = 1.5A 2 V
saturation voltage
Base-emitter saturation
VBE(sat) (1) IC = 6A IB = 1.5A 1.1 V
voltage
IC = 1A VCE = 5V 15 28
hFE (1) DC current gain IC = 6A VCE = 5V 6.5 9.5
IC = 7A VCE = 1V 5.5

Inductive load IC = 6A IB(on) = 1.2A

ts Storage time IB(off) = -2.4A L = 500µH 2 µs
tf Fall time Vclamp = 350V 0.2 µs

1. Pulsed: Pulse duration = 300 ms, duty cycle 1.5%

4/10
ST1510FX Electrical characteristics

2.1 Electrical characteristics (curve)

Figure 1. Safe operating area Figure 2. Derating curve

Figure 3. Output characteristics Figure 4. Reverse biased SOA

Figure 5. DC current gain @ VCE=1V Figure 6. DC current gain @ VCE=5V

5/10
Electrical characteristics ST1510FX

Figure 7. Collector emitter saturation Figure 8. Base emitter saturation

voltage voltage

2.2 Test circuits

Figure 9. Power losses and inductive load switching

Figure 10. Reverse biased safe operating area

6/10
ST1510FX Package mechanical data

3 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK®

packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com

7/10
Package mechanical data ST1510FX

ISOWATT218FX MECHANICAL DATA

mm.
DIM.
MIN. TYP MAX.
A 5.30 5.70
C 2.80 3.20
D 3.10 3.50
D1 1.80 2.20
E 0.80 1.10
F 0.65 0.95
F2 1.80 2.20
G 10.30 11.50
G1 5.45
H 15.30 15.70
L 9 10.20
L2 22.80 23.20
L3 26.30 26.70
L4 43.20 44.40
L5 4.30 4.70
L6 24.30 24.70
L7 14.60 15
N 1.80 2.20
R 3.80 4.20
Dia 3.40 3.80

7627132 B

8/10
ST1510FX Revision history

4 Revision history

Table 4. Revision history

Date Revision Changes

02-Nov-2005 1 Initial release.

23-Feb-2007 2 Order code and parameters on Table 1 has been change

9/10
 ST1510FX

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2007 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

10/10