ESP8266_NONOS_SDK Release Note

ESP8266_NONOS_SDK_V2.0.0_16_07_19 release notes

1. Updated libphy.a to 1055, fixed an issue of large current in Light-sleep.
2. Updated AT+ to 1.3.0:
2.1 Added Light-sleep wakeup command, AT+WAKEUPGPIO;
2.2 Fixed abnormal AT+CWDHCPS IP allocation;
2.3 Added at_sdio demo under example directory.
3. Fixed probable system default when calling cur and def interfaces.
4. Fixed the issue of high current in Deep-sleep mode without disabling SPI first.
5. Fixed an issue where the SDK would crash when switching from AP to Station mode
by calling wifi_set_phy_mode.
6. Updated secondary boot loader to v1.6:
6.1 Supports AT + based on SDIO;
6.2 Supports entering testing mode through GPIO.
7. Added support for MXIC Flash QIO mode.
8. Fixed exception caused during TCP handshake and retransmission.
9. Fixed issues in ESP-NOW.
10. Added ESP-PAIR (Simple-Pair) feature, for APIs please refer to ESP8266 SDK API
Guide.
11. wpa2-enterprise time function derivation and time check disable can be set by
users.
12. Support for PEAP/TTLS in wpa2-enterprise, for APIs please refer to ESP8266 SDK
API Guide.
13. Added mqtt demos under examples directory.
14. Other issue fixes.
15. Resolved an issue that RF_Init_data sector may be broken in stress test.
Provided a function user_rf_cal_sector_set which has to be added in application by
software developer. More details about user_rf_cal_sector_set refer to
documentation "2C-ESP8266__SDK__API Guide". (Resolved in
ESP8266_NONOS_SDK_V1.5.4.1)
16. Fix a potential risk that will cause rf not work after external reset.
(Resolved in ESP8266_NONOS_SDK_V1.5.4.1)
17. Add SDIO AT support. (Resolved in ESP8266_NONOS_SDK_V1.5.4.1)
18. Fix a potential bug in espconn. (Resolved in ESP8266_NONOS_SDK_V1.5.4.1)

ESP8266_NONOS_SDK_V1.5.4_16_05_20 Release Note

Optimization:
1. Updated libphy.a to version 972.
2. Updated libpp.a to version 10.1, revised issues about frequency offset and sleep
mode.
3. Optimized IGMP function.
4. Optimized DNS function.
5. Optimized WPS function.
6. Optimized DHCP server function.
7. Optimized wifi_station_get_connect_status function.
8. Revised the issue that API system_adc_read and system_get_vdd33 may return wrong
value.
9. Optimized API:
bool espconn_secure_ca_enable(uint8 level, uint32 flash_sector);
bool espconn_secure_cert_req_enable(uint8 level, uint32 flash_sector);

Added APIs:
1. system_adc_read_fast: ADC fast sampling.
2. wifi_fpm_auto_sleep_set_in_null_mode: set whether enter modem-sleep mode or not
when WiFi is in NULL_MODE.

AT_V1.1 Release Note:

Optimization:
1. Optimized the behavior of writing Flash.
2. Optimized DHCP server function.
3. Updated command AT+SAVETRANSLINK to save domain name.

ESP8266_NONOS_SDK_V1.5.3_16_04_15 Release Note

Optimization:
1. Supported ISSI flash.
2. SmartConfig updated to version 2.5.4, solved the issue that AirKiss may fail in
certain cases.
3. libphy.a updated to version 9281.
4. AT updated to version 1.00.
5. Added lwip_open_src_template_proj in ESP8266_NONOS_SDK\examples for open source
LWIP.
6. Added peripheral_test in ESP8266_NONOS_SDK\examples.
7. Moved driver_lib folder to be as ESP8266_NONOS_SDK\driver_lib.
8. Added SPI driver, refer to ESP8266_NONOS_SDK\driver_lib\driver\spi_interface.c.
9. Optimized espconn.
10. Optimized DNS function.
11. Optimized mDNS function.
12. Optimized the disconnection when ESP8266 runs as TCP server.
13. Optimized DHCP server: after DHCP release, it will assign the first unused IP
to next DHCP client.
14. Removed the limitation of freedom sending unencrypted beacon/probe req/probe
resp.
15. Resolved the issue that wifi_station_get_connect_status returned incorrect
status when some router restarted.
16. Revised the SSL server crash issue.

Added APIs:
1. WPA2-Enterprise APIs
wifi_station_set_username : set user name for WPA2-Enterprise
wifi_station_clear_username : clear user name for WPA2-Enterprise
2. AT APIs
at_set_escape_character : set escape character for AT commands

AT_V1.0 Release Note:

Optimization:
1. Revised the flash map of AT firmware in no bootmode, please download the bin
files according to at\readme.
2. Revised the problem that AT+PING may fail when using some special router.
3. Optimized AT firmware when receiving TCP data with UART flow control.

Added AT commands��
1. AT+CIPDOMAIN: for DNS function.

ESP8266_NONOS_SDK_V1.5.2_16_01_29 Release Note

Resolved Issues (Bugs listed below apply to Bug Bounty Program):
1. Strange os_timer_arm behavior.

Optimization:
1. Added SDIO slave driver. Developers are now able to implement AT commands based
on SDIO interface by themselves.
2. Optimized SSL shakehand.
3. Upgraded second-level boot, enabled HSPI flash.
4. Added AirKiss library,
5. Updated sample code smart_config (esp_iot_sdk\examples\smart_config).
6. The 114th byte of esp_init_data_default.bin is modified to be 1. Please use the
latest esp_init_data_default.bin.
7. Added sample code at_espconn (esp_iot_sdk\examples\at_espconn), showing how to
transmit AT commands via the internet.

Newly added APIs:

1. SDIO slave APIs
sdio_slave_init: initialize SDIO slave
sdio_load_data: upload data to SDIO buffer.
sdio_register_recv_cb: register Callbacks of data received by SDIO.
2. AirKiss APIs
airkiss_version: get version information of AirKiss.
airkiss_lan_recv: used to detect and analyze AirKiss data packets.
airkiss_lan_pack: used to analyze AirKiss data packets, and to organize response
packets waiting to be responded.
3. AT UART simulation APIs
at_fake_uart_enable : enable AT UART simulation.
at_fake_uart_rx : AT UART RX for simulation.

Release notes of AT_v0.60:

1. Added command AT+CWLAPOPT, which is used to config the attribute of the returned
value of the command AT+CWLAP.
2. Added command AT+WPS, WPS supported.
3. Added command AT+MDNS, MDSN supported.
4. Added command AT+CWSTARTDISCOVER/AT+CWSTOPDISCOVER. AirKiss intranet detecting
function is supported.
5. Optimized command AT+CIPSTART. The device can function as SSL client, and one
SSL connection can be created at most.
6. The last byte of baud rate error issue is resolved.

esp_iot_sdk_v1.5.1_16_01_08 Release Note

Resolved Issues (Bugs listed below apply to Bug Bounty Program):
1.espconn_abort may cause system crash.

Optimization:
1.Optimize the data receiving process under TCP connection.
2.Optimize low MAC and increase stability of the software.
3.Optimize watchdog feeding process.
4.Optimize softAP working mode so that some stations can be easily connected.
5.Optimize station working mode, enabling connection even when the SSID of the AP
has changed.
6.Optimize station working mode, and increase router��s compatibility during the
connection process.
7.Optimize SSL shakehand.
8.Optimize espconn internal timer.
9.Optimize UDP transmission.
10.Improve the flash writing process.
11.Strenthen WPA2 security protocols.
12.Improve data sending ability.
13.Straighten the control capability of GPIO16 under light sleep mode.
14.boot.bin is upgrade to version 1.5, resolving boot failure when firmware is
upgraded over the air (OTA).

AT_v0.52 release note��

1.Optimize the process of establishing TCP server via AT command.
2.Optimize UART-WiFi transparent transmission mode via AT command.

Please be noted that with the release of NONOS SDK Version 1.5.0
(ESP8266_NONOS_SDK_V1.5.0), the space that AT commands occupies has increased to
more than 4Mbit. Therefore, flash with 4Mbit capacity is no longer supported.
Please choose flash with at least 8Mbit capacity.

Please be noted that firmware upgrade over-the-air process is changed a bit. We

will upgrade the latest firmware to Espressif Cloud server only after it has been
tested and the overall performance is guaranteed. Users may not be able to download
firmware encapsulated in ESP8266_NONOS_SDK_V1.5.0 and other more advanced versions.

esp_iot_sdk_v1.5.0_15_11_27 Release Note

Resolved Issues (Bugs listed below apply to Bug Bounty Program):
1. Returned value of system_get_rst_info is wrong.

Optimization:
1. Optimize espconn_regist_recvcb for UDP transmission.
2. Print information will prompt errors if the input parameters of os_time_arm
excess the upper limit.
3. Optimize memory management.
4. Optimize RF frequency offset.
5. Print information will prompt errors if the size of bin file is too large in
OTA. OTA can NOT update to the older Version.
6. Optimize mDNS.
7. Revise UART output print error when powered on again after call
system_uart_swap.
8. Revise errors during multiple UDP transmissions.
9. Revise the error when wifi_station_set_config_default is called and the same AP
is set as before, while information cannot be stored in the Flash.
10. Optimize the error of packet loss during UDP transmission process under single
station mode.
11. Add new function, WPA2 Enterprise is supported.
12. SmartConfig version is upgraded to V2.5.3.
13. Mesh version is upgraded to V0.2.3.
14. User application needs to add "-lcrypto" in LINKFLAGS_eagle.app.v6 of Makefile.

Added APIs:
1.espconn_abort: bread TCP connection compulsively.
2.espconn_secure_delete: delete the SSL server when ESP8266 runs as SSL server.
3.wifi_station_set_cert_key: set certificate and private key for WPA2 Enterprise.
4.wifi_station_clear_cert_key: release the resouce of connecting to WPA2 Enterprise
AP, and clear the status.

AT_v0.51 release note:

1.Since this ESP8266_NONOS_SDK_V1.5.0, AT firmware is too large to fit in 4Mbit
(512KB) Flash. Please use 8Mbit (1MB) or larger Flash.
2.Revise the error of the first byte in AT command when UART RX interrupt handler
is implemented.
3.Revise the malfunction of display when AT+CWLAP is invoked to scan a specific AP.

esp_iot_sdk_v1.4.0_15_09_18 Release Note

Resolved Issues(Bugs below are eligible for Bug Bounty Program):
1.Espconn may fail to download big chunk of data(FOTA).
2.Invalid TCP data sent issue.
3.Fatal exceptions occur when change WiFi mode in WiFi scan callback.
4.WiFi compatibility problem of special network card.
5.Deep sleep may appear high current under certain circumstances.

Optimization:
1. Add a new method to check memory leaks (API : system_show_malloc).
2. Add print information when exception happens.
3. Resolve the problem of os_timer_disarm.
4. Optimize DHCP server, add API to set up the lease time of DHCP server. More
details are in the ��Added APIs��.
5. Add event ��EVENT_STAMODE_DHCP_TIMEOUT�� for the DHCP timeout handling
mechanism.
6. Optimize handling of the reception of data and ZWP message.
7. Add new APIs to support SSL bidirectional authentication. More details are in
the ��Added APIs��.
8. Add new APIs to set up SSL certificates and encryption keys. API
espconn_secure_set_default_certificate and espconn_secure_set_default_private_key
should be called to set SSL certificate and secure key, if ESP8266 runs as SSL
server. More details are in the ��Added APIs��.
9. Optimize the process of FOTA (firmware upgrade through WiFi.
10. Optimize mDNS, and resolve the problem that in certain case the ESP8266 softAP
can not work in the sta+AP mode.
11. Release mesh as a lib in the esp_iot_sdk, and do not provide SDK of the mesh
version any more.
12. Optimize mesh��s handling of UDP packets.
13. Optimize checking of the validity of the mesh API��s parameters.
14. Add an API to set up the largest hop of mesh. For detailed information, go to
mesh instructions.
15. Optimize the process of powering up and booting to shorten booting time by 20
ms.
16. Optimize the function of automatic frequency offset calibration.
17. Optimize the function of sniffer.
18. Strengthen reliability of the checking of beacon timeout.
19.Optimize Wi-Fi event mechanism, and add event ��
EVENT_SOFTAPMODE_PROBEREQRECVED��, and reason for a failed connection.
20. Optimize Wi-Fi callback function and strengthen reliability of the software.
21. Add the function of data transferring between stations in the soft-AP mode.
22. Update SmartConfig to the version of 2.5.1.

23.Update esp_init_data_default.bin. Please use the newest

esp_init_data_default.bin when burning.

24.Modify the espconn pointer in the receive callback of UDP. Parameters remote_ip
and remote_port in it are the remote IP and port set by espconn_create. If users
want to obtain IP and ports of the current sender, please call
espconn_get_connection_info to get relevant information.

Added APIs:
1.System API
system_show_malloc : for checking memory leak, to print the memory usage.
2.DHCP server lease time related APIs
wifi_softap_set_dhcps_lease_time��set ESP8266 softAP DHCP server lease time.
wifi_softap_get_dhcps_lease_time��check ESP8266 softAP DHCP server lease time.
wifi_softap_reset_dhcps_lease_time��reset ESP8266 softAP DHCP server lease time
which is 120 minutes by default.
3.wifi_station_dhcpc_set_maxtry��set the maximum number that ESP8266 station DHCP
client will try to reconnect to the AP.
4.Force sleep APIs
wifi_fpm_open��enable force sleep function.
wifi_fpm_close��disable force sleep function.
wifi_fpm_do_sleep��force ESP8266 enter sleep mode.
wifi_fpm_do_wakeup��wake ESP8266 up from force sleep.
wifi_fpm_set_sleep_type��set sleep type of force sleep function.
wifi_fpm_get_sleep_type��get sleep type of force sleep function.
5.Send packet freedom APIs (to send user-define 802.11 packets)
wifi_register_send_pkt_freedom_cb��register a callback for sending user-define
802.11 packets.
wifi_unregister_send_pkt_freedom_cb��unregister the callback for sending user-
define 802.11 packets.
wifi_send_pkt_freedom��send user-define 802.11 packet.
6.RFID LOCP APIs
wifi_rfid_locp_recv_open��enable RFID LOCP to receive WDS packets.
wifi_rfid_locp_recv_close��disable RFID LOCP.
wifi_register_rfid_locp_recv_cb��register a callback of receiving WDS packets.
wifi_unregister_rfid_locp_recv_cb��unregister the callback of receiving WDS
packets.
7.Rate Control APIs
wifi_set_user_fixed_rate��set the fixed rate and mask of sending data from ESP8266
wifi_get_user_fixed_rate��check the fixed rate and mask of ESP8266
wifi_set_user_sup_rate��set the rate range supported by ESP8266 to limit the rate
of sending packets from other devices.
wifi_set_user_rate_limit��limit the rate of sending data from ESP8266.
wifi_set_user_limit_rate_mask��set the interfaces of ESP8266 whose rate of sending
packets is limited by wifi_set_user_rate_limit.
wifi_get_user_limit_rate_mask��get the interfaces of ESP8266 whose rate of sending
packets is limited by wifi_set_user_rate_limit.
8.Espconn APIs
espconn_sendto��send UDP data.
espconn_secure_cert_req_enable��enable certificates verification function when
ESP8266 runs as SSL client.
espconn_secure_cert_req_disable��disable certificates verification function when
ESP8266 runs as SSL client.
espconn_secure_set_default_certificate��set the certificate when ESP8266 runs as
SSL server.
espconn_secure_set_default_private_key��set the encryption key when ESP8266 runs as
SSL server.
9.SmartConfig API
smartconfig_set_type: set the protocol type of SmartConfig.

AT_v0.50 Release Note

Note: For AT firmware to support FOTA, flash size need to be 1024KB or larger.
1.Command "AT+CWSAP" add a parameter to set whether broadcast the SSID of ESP8266
soft-AP or not.
2.Add new command "AT+CWSTARTSMART=<type>" to set a specific protocol type for
SmartConfig, <type>��1- ESPTOUCH��2-AirKiss��3-ESPTOUCH+AirKiss.
3.Add "AT+CWDHCPS_CUR" and "AT+CWDHCPS_DEF" related commands to set/check DHCP
lease time and IP range.

esp_iot_sdk_v1.3.0_15_08_08 Release Note

Resolved Issues��Bugs below are eligible for Bug Bounty Program):
1.Device can't connect to router after it gets ssid and password when using
ESPTOUCH with router's ssid hidden. [����]
2.Format string of os_random can't be supported by atoi. [�λ]
3.Optimized os_printf seems to have an issue on 4 bytes aligned and other valuable
suggestions. [Andrey Filimonov]
4.SmartConfig can��t get IP address after connected to router. [�����]

Optimization:
1.Memory optimization to save 12KBytes.
2.Optimize RF calibration to short the booting time,more details in documentation
"2A-ESP8266__IOT_SDK_User_Manual" chapter "Appendix".
3.Optimize Wi-Fi function to solve issue that ESP8266 may fail to connect to a
special router.
4.Optimize software timer to solve the a connecting problem.Please do not call
"os_delay_us" or "while" or "for" to occupy CPU more than 10 ms in timer callback.
5.Optimize system_get_rst_info to obtain more accurate information about the start-
up.
6.Optimize function of Wi-Fi scanning to be more reliable.
7.Optimize function of changing Wi-Fi mode to be more reliable.
8.Optimize WPS to improve connectivity.And WPS does not support WEP, it will return
status "WPS_CB_ST_WEP".
9.Optimize Wi-Fi function to solve softAP multiple stations DHCP issue.
10.Optimize TCP in LAST_ACK status.
11.Optimize TLS to support SHA256, SHA384, SHA512.
12.Memory optimization during TLS hand-shaking.
13.Optimize OTA funtion to download big chunk of data.
14.Add CRC32 in OTA function.Folder "tools" in esp_iot_sdk has to be updated,
otherwise OTA will fail.
15.Optimize mDNS to support both softAP and station interfaces.
16.Optimize ESP-NOW, more details in "Add APIs"
17.Update SmartConfig to version 2.4.7
18.Remove "-O2" from makefile.
19.Optimize header files to improve compatibility, will not affect compilation.

Add APIs:
1.system_soft_wdt_feed : feed software watchdog
2.wifi_softap_get_dhcps_lease��get IP range of ESP8266 softAP DHCP server
3.ESP-NOW APIs
esp_now_set_kok: set the secure key to encrypt ESP-NOW communication key
esp_now_register_send_cb: register ESP-NOW send callback
esp_now_unregister_send_cb: unregister ESP-NOW send callback

AT_v0.40 Release Note:

Note: For AT firmware to support FOTA, flash size need to be 1024KB or more than
that.

1.Add parameter <max conn> in command "AT+CWSAP" to set the maximum number of
connections allowed.

esp_iot_sdk_v1.2.0_15_07_03 Release Note

Resolved Issues��Bugs below are eligible for Bug Bounty Program):
1.TLS server disconnect to ESP8266 may cause crash. [���»�]

Optimization:
1.Update SmartConfig to version 2.4 , corresponding to ESPTOUCH APP v0.3.4,delete
parameter "sc_type type" in smartconfig_start, SmartConfig type can be got
automatically.
2.Add parameter "sint16 freq_offset; " in structure "bss_info" to get AP's
frequency offset.
3.Folder "ld" is updated, please use the latest one (\esp_iot_sdk_v1.2.0\ld )
4.Add UDP transparent transmission example in documentation "4B-ESP8266__AT Command
Examples"
5.Revise the scan issue that may cause Wi-Fi connection break.
6.Add ESP-NOW function, more details in "Add APIs"
7.Add WPS function,more details in "Add APIs"
8.Fixed a DNS fail issue with special router
9.Optimize espconn,revise issues below:
(1) enter sent callback late in UDP transmission
(2) TCP shakehand may fail issue
(3) SSL connection fail may cause crash
(4) optimize SSL error handler
10. Memory optimization

Add APIs:
1.ESP-NOW APIs
esp_now_init: init ESP-NOW function
esp_now_deinit: deinit ESP-NOW function
esp_now_register_recv_cb: register ESP-NOW receive callback
esp_now_unregister_recv_cb: unregister ESP-NOW receive callback
esp_now_send: send ESP-NOW packet
esp_now_add_peer: add an ESP-NOW peer
esp_now_del_peer: delete an ESP-NOW peer
esp_now_set_self_role: set ESP-NOW role of device itself
esp_now_get_self_role: get ESP-NOW role of device itself
esp_now_set_peer_role: set ESP-NOW role about another device
esp_now_get_peer_role: get ESP-NOW role about another device
esp_now_set_peer_key: set ESP-NOW key of a device
esp_now_get_peer_key: get ESP-NOW key of a device

2. WPS APIs
wifi_wps_enable : enable WPS function
wifi_wps_disable: disable WPS function
wifi_wps_start: start WPS communication
wifi_set_wps_cb: set WPS callback

3.software watchdog APIs

system_soft_wdt_stop: stop software watchdog
system_soft_wdt_restart: restart software watchdog

4.sntp_get_timezone: get SNTP timezone

AT_v0.30 Release Note:

Note: For AT firmware to support FOTA, flash size need to be 1024KB or more than
that.
1.Command "AT+CWSTARTSMART" need not parameter any more, SmartConfig type can be
got automatically.
2.AP's frequency offset can be got by command "AT+CWLAP"
3.Memory optimization

esp_iot_sdk_v1.1.2_15_06_12 Release Note

1. support certificate issuer verification for SSL
2. Update SPI driver, support overlap mode
Add APIs:
1. wifi_station_set_hostname : set ESP8266 station DHCP hostname
2. wifi_station_get_hostname : get ESP8266 station DHCP hostname
3. spi_flash_set_read_func to set user specified reading SPI function on overlap
mode
4. espconn_secure_ca_disable : disable SSL CA verify
5. espconn_secure_ca_enable : enable SSL CA verify

Add Documentation:
1. SPI overlap introduction: \esp_iot_sdk\document
2. SSL introduction: \esp_iot_sdk\document

esp_iot_sdk_v1.1.1_15_06_05 Release Note

Resolved Issues��Bugs below are eligible for Bug Bounty Program):
1.Too short timer which set by os_arm_timer_us may cause crash. [Tommy]
2.Call os_malloc in low heap situation may cause crash. [MeneerThijs]
3.Memory leak issue when SSL connection fail. [���»�]

Optimization:
1.Update JSON parser to handle with illegal parameter and illegal calling progress.
2.Add parameter of user_esp_platform_check_ip in user_websever.c which in IOT_Demo.

3.Update UART driver to solve the problem that if send data through UART while
ESP8266 startup may cause UART invalid.
4.Update smartconfig to version 2.2, and update the description and example of
smartconfig_start in document "2C_ESP8266__Programming Guide"
5.Update code in iram to solve the problem that space for text is not enough.
6.Update PWM driver and provide libpwm.a in esp_iot_sdk, so if using pwm, please
update makefile refer to the makefile in SDK_v1.1.1 IoT_Demo example. Update PWM
APIs in "2C_ESP8266__Programming Guide", more details in "Added APIs" below.
7.Revised issue that multicast may fail in ESP8266 softAP mode.
8.Update folder "driver",add folder "driver_lib" in \esp_iot_sdk\examples , add
"hw_timer.c" about frc1 hardware timer.
9.Remove useless driver code in IOT_Demo
10.Update IOT_Demo to use the latest PWM driver in light demo.
11.Provide liblwip_536.a of which MSS size is 536
12.Revised issue that boot may fail when 80Mhz SPI clock selected
13.Update esp_init_data_default.bin about RF option in \esp_iot_sdk\bin

Added APIs��
1.PWM APIs��
Updated�� pwm_init��add parameter to set PWM channel and GPIO pin
Added��
��1��get_pwm_version��get version information of PWM driver
��2��pwm_set_period��set PWM period
��3��pwm_get_period��get PWM period
Deleted��
��1��pwm_set_freq��set PWM frequency
��2��pwm_get_freq��get PWM frequency
2.Read/write flash with protection
��1��system_param_save_with_protect��write data into flash with backup protection
��2��system_param_load��read data which saved into flash with backup protection
3.system_get_rst_info��get information about current startup��it is a normal
startup or watch dog reset
4.at_response��set AT response
5.at_register_response_func��register a callback for user-define AT response.
6.Update document "2C_ESP8266__Programming Guide" to add description of interrupt
definition in ets_sys.h

AT_v0.25 Release Note:

Note: For AT firmware to support FOTA, flash size need to be 1024KB or more than
that.
Optimization:
1.Add parameter about UDP local port in command "AT+SAVETRANSLINK"

Added AT command��
1.AT+CIPDINFO��set configuration whether show remote IP and remote port with
��+IPD�� or not

esp_iot_sdk_v1.1.0_15_05_26 Release Note

1.Licensing for SDK 1.1.0 change to the Espressif MIT license since
esp_iot_sdk_v1.1.0_15_05_26

esp_iot_sdk_v1.1.0_15_05_22 Release Note

Resolved Issues��Bugs below are eligible for Bug Bounty Program):
1.Predictable TLS random values leads to insecure connections [projectgus]
2.Connection problem in softAP+station mode.[�ǽ�ͨ]
3.Low heap cause of reset when connect using SSL. [TuanPM]
4.Smart config issue [bigbear]

Document "2C_ESP8266__Programming Guide" updates:

1.Update Demo code of rtc timer in appendix, and rtc timer will return to zero
after deep-sleep wake up. [andrew]
2.Add "3.espconn callback" in appendix to introduce espconn callbacks and the
pointer may be different in different callback.[nagverma]
3.Add RF description in ��2.Overview����if RF is disabled��ESP8266 station
and soft-AP are both disabled.[yiaiguo]
4.Revise name of API "wifi_softap_set_dhcps_offer_option" [ryan]

Optimization:
1.Solving the problem that some Wi-Fi events may be missing during test.
2.UART Wi-Fi passthrough of UDP maybe change to oneway. [orgmar]
3.Optimized FOTA to make upgrade faster
4.ESP8266 soft-AP can connected to 8 stations at most, softap_config.max_connection
default is 4
5.ESP8266 station will connect to the stronger WiFi signal, if there are several
APs sharing the same SSID.[stefan]
6.Add 1024KB+1024KB flash map which need boot_v1.4+ and flash download tool_v1.2+,
more details in document "2A-ESP8266_IOT_SDK_User_Manual"
7.Optimized PWM driver
8.Revised structure mdns_info to support 10 groups of text data.
9.user_rf_pre_init has to be added in user_main.c, user can call
system_phy_set_rfoption to set configuration of RF in it.Could refer to user_main.c
in IOT_Demo (\esp_iot_sdk\examples)
10.Update smartconfig
(1) Need not call wifi_station_set_auto_connect to disable auto-connect before
smartconfig any more
(2) Delete smartconfig_get_status
(3) Updates the example of smartconfig_start in "2C_ESP8266__Programming Guide"
11.Remove some useless API from os_api.h, such as
CODE: SELECT ALL
diff -r esp_iot_sdk_v1.0.1/include/osapi.h esp_iot_sdk_v1.1.0/include/osapi.h
39,41d31
< #define os_timer_done ets_timer_done
< #define os_timer_handler_isr ets_timer_handler_isr
< #define os_timer_init ets_timer_init
45d34
< #define os_update_cpu_frequency ets_update_cpu_frequency

12.Remove interrupt related API from os_api.h, please use API in ets_sys.h instead,
such as
CODE: SELECT ALL
diff -r esp_iot_sdk_v1.0.1/include/osapi.h esp_iot_sdk_v1.1.0/include/osapi.h
#define os_intr_lock ets_intr_lock
#define os_intr_unlock ets_intr_unlock
#define os_isr_attach ets_isr_attach
#define os_isr_mask ets_isr_mask
#define os_isr_unmask ets_isr_unmask

13.Remove GPIO pull-down function from eagle_soc.h

CODE: SELECT ALL
#define PERIPHS_IO_MUX_PULLDWN BIT6
#define PERIPHS_IO_MUX_SLEEP_PULLDWN BIT2
#define PIN_PULLDWN_DIS(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,
PERIPHS_IO_MUX_PULLDWN)
#define PIN_PULLDWN_EN(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,
PERIPHS_IO_MUX_PULLDWN)

Note:
There are no pull-down functions on GPIO pad now, so we should never use these
registers.
Add external resistance to pulldown the pin.

Added APIs��
1.sntp_set_timezone: set SNTP time zone.
2.espconn_dns_setserver : set default DNS server
3.system_uart_de_swap : disable UART0 swap
4.system_get_flash_size_map: get flash size and flash map
5.system_phy_set_max_tpw : set maximum RF TX power
6.system_phy_set_tpw_via_vdd33 ��set RF TX power according to VDD33
7.system_phy_set_rfoption : set RF option
8.wifi_station_get_rssi��get rssi of AP which ESP8266 station connected to ��
9.wifi_softap_get_station_num ��get number count of stations connected to ESP8266
soft-AP

AT_v0.24 Release Note:

Note: For AT firmware to support FOTA, flash size need to be 1024KB or more than
that.
Optimization:
1.Disable data echo of command "AT+CIPSEND"
2.Optimized "AT+CWJAP?" to get channel and rssi
3.ESP8266 station IP can only be got and inquiried after ESP8266 station connected
to AP

Added AT command��
1.AT+RFPOWER ��set maximum RF TX power
2.AT+RFVDD �� set RF TX power according to VDD33

esp_iot_sdk_v1.0.1_15_04_24 Release Note

Resolved Issues��Bugs below are eligible for Bug Bounty Program):
1. SSL connection may fail if SSL packet size larger than 2kBytes [PeteW ]
2. UDP remote IP to be 0.0.0.0 may cause reset [Jerry S]
3. Optimize wifi_get_ip_info to fix loss of wireless connectivity problem
4. Air-Kiss restart [Orgmar]

Optimization:
1. Optimized IOT_Espressif_EspTouch.APK (apply for access from Espressif) for
improved compatibility. [���ƻ�]
2. TCP server can not open again immediately with the same port [624908539]
3. Update UART driver for parity bit value may be incorrect [1062583993]
4. Add define of ��ICACHE_RODATA_ATTR�� for Symbol 'ICACHE_RODATA_ATTR' could
not be resolved. [����]
5. Add API wifi_softap_dhcps_set_offer_option to enable/disable ESP8266 softAP DHCP
server default gateway. [xyz769]
6. AT register_uart_rx_intr may enter callback twice. [�����]
7.optimize document that WPA password length range �� 8 ~ 64 bytes [785057041]
8. ESP8266 softAP DHCP server record 8 DHCP client's IP at most [ygjeon]
9. To set static IP (wifi_set_ip_info) has to disable DHCP
first(wifi_softap_dhcps_stop or wifi_station_dhcpc_stop)
10.Add example of wifi_softap_set_dhcps_lease
11. smartconfig_start can only be called in ESP8266 station mode
Added APIs:
1. Wi-Fi related APIs:
wifi_station_set_reconnect_policy: enable/disable reconnect when ESP8266 disconnect
from router,default to be enable reconnect.
wifi_set_event_handler_cb: set event handler of ESP8266 softAP or station status
change.
wifi_softap_dhcps_set_offer_option: enable/disable get router information from
ESP8266 softAP, default to be enable.
2. SNTP APIs:
sntp_get_current_timestamp: get current timestamp from Jan 01, 1970, 00:00 (GMT)
sntp_get_real_time: char��get real time (GTM + 8 time zone)
sntp_init: initialize SNTP
sntp_stop: stop SNTP
sntp_setserver: set SNTP server by IP
sntp_getserver: get SNTP server IP
sntp_setservername: set SNTP server by domain name
sntp_getservername: get domain name of SNTP server set by sntp_setservername
3. MDNS APIs:
espconn_mdns_init: initialize mDNS
espconn_mdns_close: close mDNS
espconn_mdns_server_register: register mDNS server
espconn_mdns_server_unregister: unregister mDNS server
espconn_mdns_get_servername: get mDNS server name
espconn_mdns_set_servername: set mDNS server name
espconn_mdns_set_hostname: get mDNS host name
espconn_mdns_get_hostname: set mDNS host name
espconn_mdns_disable: disable mDNS
espconn_mdns_enable: endisable mDNS

AT_v0.23 Release Note:

Optimized:
1.AT+CWJAP add parameter "bssid", for several APs may have the same SSID

New AT commands:
1. AT+CIPSENDBUF: write data into TCP-send-buffer; non-blocking. Background task
automatically handles transmission. Has much higher throughput.
2. AT+CIPBUFRESET: resets segment count in TCP-send-buffer
3. AT+CIPBUFSTATUS: checks status of TCP-send-buffer
4. AT+CIPCHECKSEGID: checks if a specific segment in TCP-send-buffer has sent
successfully

esp_iot_sdk_v1.0.1_b2_15_04_10 release note

Resolved Issues��Bugs below are eligible for Bug Bounty Program)��

1.Call espconn_sent to send UDP packet in user_init cause reset.[BBP#2 reporter
(��֮ ����)]
2.UART & FlowControl issue: send data to FIFO without CTS flag will cause WDT
3.UDP broadcast issue in WEP

Optimize:
1.Add more details about measure ADC & VDD3P3 in appendix of document��2C-SDK-
Espressif IoT SDK Programming Guide��[BBP#15 reporter (DarkByte)]
2.Can not do any WiFi related operation if WiFi mode is in NULL_MODE [BBP#23
reporter (hao.wang)]
3.start_ip and end_ip won't change through API wifi_softap_set_dhcps_lease [BBP#37
reporter (glb)]
4.AT get into busy state [BBP#35 reporter (tommy_hk)]
5.ssid + password length limitation when using AirKiss [BBP#45 reporter (zhchbin)]
Add APIs��
1.espconn_secure_set_size��set buffer size for SSL packet
2.espconn_secure_get_size��get SSL buffer size
3.at_register_uart_rx_intr��set UART0 to be used by user or AT commands

Add AT command:
1.AT+SLEEP: set ESP8266 sleep mode

esp_iot_sdk_v1.0.1_b1_15_04_02 release note

Resolved Issues��Bugs below are eligible for Bug Bounty Program)��
1. SmartConfig loses one bit of SSID [BBP#14 reporter (���ƻ�)]
2. Connection to ESP8266 softAP failed after SmartConfig��BBP#24 reporter
(����)]
3. Exception occurred while updating spi_flash_write [BBP#13 reporter (DarkByte)]

Optimize:
1.espconn_set_opt: set configuration of TCP connection,add parameter for TCP keep-
alive

Add APIs:
1.espconn_clear_opt: clear configuration of TCP connection
2.espconn_set_keepalive: set configuration of TCP keep-alive to detect if TCP
connection broke
3.espconn_get_keepalive: get configuration of TCP keep-alive

AT_v0.23_b1 release note

Note: AT added some functions so flash size need to be 1024KB or more than that.

Resolved Issue��
1.Always "busy" if TCP connection abnormally broke during AT+CIPSEND

Optimize:
1.Add UDP transparent transmission [BBP#1 reporter (��)]
2.Optimize the initial value of AT+CWDHCP? [BBP#10 reporter (ondrej.dolejsi)]
3.Add TCP keep-alive function in AT+CIPSTART

Add AT command:
1.Add AT+CIPSENDEX which support quit from sending mode by "\0" (so an useful "\0"
need to be "\\0")[BBP#7 reporter (Jerry Sy)]

esp_iot_sdk_v1.0.0_15_03_20 release note

Resolved Issues��
1��Interrupt during flash erasing will cause wdt reset��
2��Read/write rtc memory��
3��If router disconnect to ESP8266, ESP8266 won��t reconnect;
4��Connect to router which hid its SSID

Add APIs:
1��system_update_cpu_freq: change CPU frequency��
2��wifi_promiscuous_set_mac: set a mac address filter during sniffer��
3��wifi_set_broadcast_if : set which interface will UDP broadcast send from��

Optimization:
1��Optimize smartconfig to version v1.0��Please don't call any other APIs
during SmartConfig.
2��Optimize AT to version 0.22.0.0��
3��Optimize the protection of system parameters , and add error-check about
it��
4��Optimize beacon delay of ESP8266 softAP��
5��Optimize boot to version 1.3(b3)��
1>��Add API system_restart_enhance: for factory test, support to load and run
program in any specific address��
2>��Add APIs to get boot version and start address of current user bin��
3>��Fix compatibility problem of dual flash��
6��Optimize sniffer, structure sniffer_buf changed, please refer to document��
7��Optimize espconn��
8��Optimize pwm��
9��Other optimize to make the software more reliable��

AT_v0.22 release note

Important Note:
1.AT added some functions so it's larger than before, if you want to compile it,
please modify ld files according to the ��!!!readme!!!" file.
2."AT+CIUPDATE" , if you use Espressif AT bin(\esp_iot_sdk_v1.0.0\bin\at) directly
it will upgrade bin files from Espressif Cloud; if you compiled your own AT, you
need to do your own "AT+CIUPDATE" ,we provide a demo(\esp_iot_sdk_v1.0.0\examples\
at ) showing upgrade from local server.
3. Previous version of AT��can not upgrade from Espressif Cloud any
more��please use this latest AT.

Fix bug:
1��Wrong return value of AT+CIPSTATUS��
2��wdt rest after ��0,CONNECT FAIL����

Add AT commands��
1��Change AT commands of which configuration will store into flash to two
kinds��
XXX_CUR: current��only set configuration��won��t save it into Flash��
XXX_DEF: default, set configuration and save it to Flash
2��Add SmartConfig in AT��
AT+CWSTARTSMART/AT+CWSTOPSMART: start / stop SmartConfig
Notice��please refer to the document�� call ��AT+CWSTOPSMART�� to stop
SmartConfig first since ��AT+CWSTARTSMART����then call other AT commands.
Don��t call any other AT commands during SmartConfig.
3��AT+SAVETRANSLINK��save transparent transmission link to Flash��
Note��AT+CIPMODE=1 set to enter transparent transmission mode��won��t save to
Flash.

Add AT APIs
1��at_customLinkMax�� set the max link that allowed, most can be 10; if you
want to set it, please set it before at_init; if you didn��t set it, the max link
allowed is 5 by default.
2��at_enter_special_state/ at_leave_special_state��Enter/leave AT processing
state. In processing state, AT core will return ��busy�� for any further AT
commands.
3��at_set_custom_info��set custom version information of AT which can be got by
AT+GMR��
4��at_get_version��get version information of AT lib .

Optimize
1��Add UDP remote ip and remote port is allowed to be parameters of
��AT+CIPSEND��
2��Move ��AT+CIUPDATE�� from lib to AT demo��\esp_iot_sdk\examples\at��,
AT demo shows how to upgrade AT firmware from a local server. Notice that AT
upgrade the bin files name have to be "user1.bin" and "user2.bin".
3��Optimize ��AT+CIPSTA��, add gateway and netmask as parameters
4��Optimize transparent transmission.

esp_iot_sdk_v0.9.5_15_01_22 Release Note

Fix bugs:
1��Incorrect status got by API : wifi_station_get_connect_status��
2��Sniffer can not quit without restart��
3��wifi_station_ap_change always return true��
4��TCP connection issues

Add APIs:
1��system_deep_sleep_set_option: set what the chip will do when deep-sleep wake
up��
2��wifi_status_led_uninstall��
3��wifi_station_ap_get_info : get information of AP that ESP8266 station
connected.
4��wifi_station_dhcpc_status & wifi_softap_dhcps_status �� get DHCP status
5��smart config APIs
6��add beacon_interval parameter in struct softap_config
7��espconn_recv_hold and espconn_recv_unhold to block TCP receiving data and
unblock it.
8��AT APIs to let user define their own AT.

Optimize��
1��light sleep��modem sleep��deep sleep
2��compile method��./gen_misc.sh ��then follow the tips and steps.
3��when no buffer for os_malloc��return NULL instead of malloc assert.
4��users can enable #define USE_OPTIMIZE_PRINTF in user_config.h to remove
strings of os_printf from ram to irom
5��faster the re-connection of ESP8266 station to router after deep-sleep.
6��update to boot v1.2 to support new format user.bin��
7��update ARP
8��update SSL
9��revised system_deep_sleep��system_deep_sleep(0)��set no wake up
timer��connect a GPIO to pin RST, the chip will wake up by a falling-edge on pin
RST

esp_iot_sdk_v0.9.4_14_12_19 Release Note

1��Update sniffer to support capture HT20 packet, and the length of HT40
packet��
2��Add APIs to set and get sleep type��
3��Add APIs to get version info of sdk, delete version.h��
4��RAW in LWIP is open source now, add API of function ping��
5��Update spi driver��
6��Optimize APIs related to espconn��
7��Fix some bugs to make the software more reliable��

esp_iot_sdk_v0.9.3_14_11_21 Release Note

1��Add license documentation of ESPRESSIF SDK
2��Add APIs to read and write RTC memory, and APIs to get RTC time.
3��Add APIs to swap UART0
4��Add API to read ADC, delete adc.c.
5��Add API to read spi flash id
6��Revise struct station_config, add bssid parameters to distinguish different AP
with same ssid ;
Note: if station_config.bssid_set is not 0 , station_config.bssid has to be set, or
connection will fail. So in general, station_config.bssid_set need to be 0.
7��Revise struct scan_config, add scan_config.show_hidden to set whether scan APs
which ssid is hidden or not; not scan, set scan_config.show_hidden to be 0.
Add bss_info.is_hidden in struct bss_info to show if this AP��s ssid is hidden.
8��Revise struct softap_config, add softap_config.ssid_len. If
softap_config.ssid_len == 0, check ssid till find a termination characters;
otherwise it depends on softap_config.ssid_len.
9��Revise API ��wifi_softap_set_config�� to take effect immediately, needs
not restart to make the configuration enable any more.
10��Add APIs to set and get physical layer mode��802.11b/g/n��
11��Add APIs to enable and disable DHCP server of ESP8266 softAP
12��Add APIs to enable and disable DHCP client of ESP8266 station
13��Add API to set range of ip address that get from DHCP server
14��Add APIs to set and get how many TCP connections allowed at max.
15��Add APIs to set and get how many TCP clients allowed at max to a TCP server.
16��Revise ��wifi_set_ip_info�� and ��wifi_set_macaddr�� to take effect
immediately.
17��Fix some bugs to make the software more reliable.