0% found this document useful (0 votes)
90 views9 pages

WPM 2341

This document summarizes a P-channel enhancement mode MOSFET. It has the following key features: 1) It has a high efficiency and extends battery life. 2) It has a miniature SOT23-3 surface mount package. 3) It has a super high density cell design for extremely low resistance. The MOSFET can be used in applications such as DC/DC converters, load switches, battery powered systems, LCD display inverters, and power management in portable battery powered products.

Uploaded by

veronica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
90 views9 pages

WPM 2341

This document summarizes a P-channel enhancement mode MOSFET. It has the following key features: 1) It has a high efficiency and extends battery life. 2) It has a miniature SOT23-3 surface mount package. 3) It has a super high density cell design for extremely low resistance. The MOSFET can be used in applications such as DC/DC converters, load switches, battery powered systems, LCD display inverters, and power management in portable battery powered products.

Uploaded by

veronica
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

WPM2341

WPM2341
P-Channel Enhancement Mode Mosfet
Http://www.sh-willsemi.com

Features
z Higher Efficiency Extending Battery Life
z Miniature SOT23-3 Surface Mount Package
3
z Super high density cell design for extremely low RDS (ON)

1
Applications 2
zDC/DC Converter
zLoad Switch
zBattery Powered System
z SOT 23-3
zLCD Display inverter
zPower Management in Portable, Battery Powered Products
pin connections :

PïChannel
ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted
Steady
Parameter Symbol 5s Unit G 1
State
3 D
Drain-Source Voltage VDS -20
V S 2
Gate-Source Voltage VGS ±8
Continuous Drain Current TA=25°C -4.3 -3.5 Top View
a
ID
(TJ = 150 °C) TA=80°C -3.2 -2.5
Pulsed Drain Current IDM -20 A Marking:

Continuous Source Current


IS -1.7 -1 Drain
(Diode Conduction) a 3
Maximum Power TA=25°C 1.25 0.75 W41Z
a
PD W
Dissipation TA=80°C 0.7 0.42
1 2
Operating Junction and Storage
TJ, Tstg - 55 to 150 °C Gate Source
Temperature Range
W 41= Specific Device Code
a. Surface Mounted on FR4 Board using 1 in sq pad size,2oz Cu. Z = Date Code

Order information
PartNumber Package Shipping 
WPM2341Ͳ3/TR
 SOT23-3  3000Tape&Reel

Will Semiconductor Ltd. 1 2015/08/25 – Rev. 1.9


WPM2341

THERMAL RESISTANCE RATINGS 


Parameter Symbol Typical Maximum Unit
t”5s 75 100
Junction-to-Ambient Thermal Resistance b RșJA °C/W
Steady State 125 165
b. Surface Mounted on FR4 Board using 1 in sq pad size, 2oz Cu.

MOSFET ELECTRICAL CHARACTERISTICS(TJ =25 ć unless otherwise specified)

Parameter Symbol Test Condition Min Typ Max Units


Off Characteristics
Drain-Source Breakdown Voltage BVDSS VGS = 0V,ID = -250ȝA -20 V
Zero Gate Voltage Drain Current IDSS VDS =-16V,VGS = 0V -1 ȝA
Gate –Source leakage current IGSS VGS = f8 V,VDS = 0V f100 nA
On Characteristics
Gate Threshold Voltage VGS(th) VGS = VDS, ID =-250ȝA -0.35 -0.63 -1.00 V
Static Drain-Source VGS = -4.5V, ID = -3.3A 52 61 mȍ
RDS(on)
On-Resistance VGS = -2.5V,ID = -2.8 A 65 71 mȍ
Forward Transconductance gFS VDS = -5 V, ID = -3.3A 3.0 S
Dynamic Characteristics
Input Capacitance Ciss 700 pF
VDS = -6 V, VGS = 0V,
Output Capacitance Coss 160 pF
f = 1.0 MHz
Reverse Transfer Capacitance Crss 120 pF
Switching Characteristics
Turn-On Delay Time td(on) 25 ns
Turn-On Rise Time tr VGS = -4.5V, VDD = -6 V, 55 ns
Turn-Off Delay Time td(off) ID = -1.0A, RG=6.0ȍ, 90 ns
Turn-Off Fall Time tf 60 ns
Total Gate Charge QG(TOT) 8 13 nC
Threshold gate charge QG(TH) VDS = -6 V,I D = -3.3A, 0.2 nC
Gate-Source Charge QGS VGS =-4.5V 1.2 nC
Gate-Drain Charge QGD 2.2 nC
Drain-Source Diode Characteristics and Maximun Ratings
Forward Diode Voltage VSD VGS = 0V,IS = -1.6A -0.8 V

Will Semiconductor Ltd. 2 2015/08/25 – Rev. 1.9


WPM2341
Typical Characteristics (TJ = 25°C unless otherwise noted)

20 20
VGS =-5 thru -2.5 V TC = - 55 °C

16 -2 V 16
25 °C
-I D - Drain Current (A)

-I D - Drain Current (A)


125 °C

12 12

8 8
-1.5 V

4 4

-1 V
0 0
0 1 2 3 4 5 0.0 0.5 1.0 1.5 2.0 2.5

-VDS - Drain-to-Source Voltage (V) -V GS - Gate-to-Source Voltage (V)


Output Characteristics Transfer Characteristics

0.10 900

750
0.08
R DS(on) - On-Resistance (Ω)

VGS =-2.5 V
C - Capacitance (pF)

600
Ciss
0.06

450

0.04 VGS =-4.5 V


300

0.02
150 Coss

Crss
0.00 0
0 4 8 12 16 20 0 4 8 12 16 20

-I D - Drain Current (A) -VDS - Drain-to-Source Voltage (V)


On-Resistance vs. Drain Current Capacitance

5 1.5

VDS =-6 V 1.4 VGS =-4.5 V


-VGS - Gate-to-Source Voltage (V)

4 ID =-3.3 A ID =-3.3 A
1.3
R DS(on) - On-Resistance

1.2
(Normalized)

3
1.1

1.0
2
0.9

0.8
1
0.7

0 0.6
0 2 4 6 8 10 - 50 - 25 0 25 50 75 100 125 150

Qg - Total Gate Charge (nC) TJ - Junction Temperature (°C)


Gate Charge On-Resistance vs. Junction Temperature

Will Semiconductor Ltd. 3 2015/08/25 – Rev. 1.9


WPM2341
Typical Characteristics (TJ = 25°C unless otherwise noted)

20 0.15

10
0.12

R DS(on) - On-Resistance (Ω)


-I S - Source Current (A)

ID =-3.3 A
TJ = 150 °C 0.09
ID = - 2 A
TJ = 25 °C
1
0.06

0.03

0.1 0.00
0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 1 2 3 4 5

-VSD - Source-to-Drain Voltage (V) -VGS - Gate-to-Source Voltage (V)


Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source Voltage

0.4 12

0.3 10
ID = -250μA
V GS(th) Variance (V)

0.2 8
Power (W)

0.1 6

0.0 4
TA = 25 °C

- 0.1 2

- 0.2 0
- 50 - 25 0 25 50 75 100 125 150 0.01 0.1 1 10 100 600
TJ - Temperature (°C) Time (s)
Threshold Voltage Single Pulse Power

100
IDM Limited
Limited by RDS(on)*

10
P(t) = 0.0001
-I D - Drain Current (A)

P(t) = 0.001
1
ID(on)
P(t) = 0.01
Limited

P(t) = 0.1
TA = 25 °C P(t) = 1
0.1 Single Pulse
P(t) = 10
DC
BVDSS Limited
0.01
0.1 1 10 100
VDS - Drain-to-Source Voltage (V)
* VGS > minimum VGS at which RDS(on) is specified
Safe Operating Area

Will Semiconductor Ltd. 4 2015/08/25 – Rev. 1.9


WPM2341
Typical Characteristics (TJ = 25°C unless otherwise noted)

1
Duty Cycle = 0.5
Normalized Effective Transient
Thermal Impedance

0.2 Notes:

0.1 PDM

0.1
t1
0.05
t2
t1
1. Duty Cycle, D =
0.02 t2
2. Per Unit Base = R thJA = 125 °C/W
3. T JM - TA = PDMZthJA(t)
4. Surface Mounted
Single Pulse
0.01
10-4 10-3 10-2 10-1 1 10 100 600
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Ambient

Will Semiconductor Ltd. 5 2015/08/25 – Rev. 1.9


WPM2341
Power Dissipation Characteristics
1. The package of WPM2341 is SOT23-3, surface mounted on FR4 Board using 1 in sq pad sizeˈ
2 oz CuˈR șJA is 125 ć/W.
2. The power dissipation PD is based on TJ(MAX)=150°C, and the relation between TJ and PD is TJ = Ta +
R șJA* PD , the maximum power dissipation is determined by R șJA .
3. The R șJA is the thermal impedance from junction to ambient, using larger PCB pad size can get
smaller R șJA and result in larger maximum power dissipation.

125 ć/W when mounted on


a 1 in2 pad of 2 oz copper.

Welding temperature curve

Will Semiconductor Ltd. 6 2015/08/25 – Rev. 1.9


WPM2341

Packaging Information
SOT23-3 Package Outline Dimension

'LPHQVLRQV,Q0LOOLPHWHUV 'LPHQVLRQV,Q,QFKHV
6\PERO
0LQ 0D[ 0LQ 0D[
A 1.050 1.250 0.041 0.049
A1 0.000 0.100 0.000 0.004
A2 1.050 1.150 0.041 0.045
b 0.300 0.500 0.012 0.020
c 0.100 0.200 0.004 0.008
D 2.820 3.020 0.111 0.119
E 1.500 1.700 0.059 0.067
E1 2.650 2.950 0.104 0.116
e 0.950(BSC) 0.037(BSC)
e1 1.800 2.000 0.071 0.079
L 0.300 0.600 0.012 0.024
ș 0° 8° 0° 8°

Will Semiconductor Ltd. 7 2015/08/25 – Rev. 1.9

You might also like