INKALUM

PROFILE
We would like to take this opportunity to introduce ourselves as one of the aluminium extrusion
manufacturer in Indonesia.
PT. INKASA JAYA ALUMINIUM was established in Nov 2013
PT. INKASA JAYA ALUMINIUM is 100% an Indonesian owened company
PT. INKASA JAYA ALUMINIUM plant has the following state of the art facilities and
services :
 8 unit latest aluminium extrusion presses
 3 unit of smelting furnaces
 Anodizing and powder coating finished facilities
 In house die designers,technicians and engineers and also die makers
With our set-up, we are able to offer all customers with a one stop services to meet their
industry standards requirement such as building construction marine, ship building, aerospace,
automobile, precisions engineering, electronics, medical equipments, machineries and etc.
Recently, we set up our Pasuruan, East Java, Indonesia head office, PT. INKASA JAYA
ALUMINIUM to focus our business strategy “Providing One Stop Solution” to better serve
all our customers requirements in this region.

GENERAL INFORMATION
A unique combination of properties puts aluminium and its alloys among our most flexible
engineering and construction materials, which delivers high performance in functional
services. The advantages of aluminum extrusion can be selected and mixed almost without
limit to suit the needs and preferences of customers in a single material and process. Described
below are major advantages that make aluminum extrusion such flexible and favorable
products.
Aluminium Major Advantages :
 All alloys are light in weight, yet some have strengths greater than of that of structural steel.
Thus the lightweight may reduce the cost of handling and product shipping whatever the
applications.
 Aluminium requires no protective coating for most applications; the surface supplied is
entirely adequates without futher finishing. Where the plain aluminium surface does not
suffice, a wide variety of surface finishes are available to suit, such as: chemical,
electrochemical, and paint finishes.
 Aluminium and most of its alloys have good electrical and thermal conductivity and high
reflectivity to both heat and light. Although it is an excellent electrical conductor,
aluminium does not produce sparks, which is an essential property for products used highly
flammable or explosive materials and atmosphere.
 Aluminium has a high resistance to corrosion because on surface exposed to the atmosphere
and other environmental, factors a thin transparent oxide skins burn immediately and
protects the metal from futher oxidation. The metal can safety be used in the presence of
certain mild alkalis with the aid of inhibitors, but general direct contact with alkaline
substances should be avoided as these attack the oxide skin and are therefore corrosive to
aluminium.
 Aluminium is often the most economical choice for electrical system components because
its electrical conductivity (alloy 1350) is approximately 36MS/m (62% of IACS).
 The aluminium industry includes a large and active “secondary metal” sector which accept
scrapped aluminium products for remilting and recovery of the metal. Aluminium extrusion
have substantial scrap value and can be recycled. That’s an advantage that may appeal both
to a potential buyer and to his concern for environmental protection.
 Aluminium and most of its alloys can easily be worked into any form and readily accept a
wide variety of surface finishes. Aluminum is a popular choice of material for complex
sectioned. Often, it can compete successfully with cheaper materials having a lower degree
of workability. In fact most aluminium alloys can be machined speedly and easily and
important factor contributing to the low cost or finished aluminium parts. There is almost
no limit to the different shapes in which the aluminium may be extruded.
Finishes for Aluminium Extruded Products:
 Mill Finish
Natural aluminium finish of the extrusion press no futher anodizing or coloring process.
 Natural Anodizing
By means of eletro-chemical process natural oxide-film will be formed and thickened
considerably on the metal surface. The aluminium extrusion is then sealed in hot deionized-
water which closes of the pores and permanently seals the oxide film imparting to the metal
surface the extreme hardness, corrosion and wear resistance of the oxide. INKASA Natural
Anodize finish conform to International Standard and is available in nominal film thickness
5, 10, 18 and 25 microns.
For normal and severe atmosphere condition, film thickness from 10 to 25 microns
repectively should be recommended.
 Color Finish
In the INKASA color process, inorganic metal color particles are deposited and fixed
electronically at the very base of the pores of anodic film allowing virtually full thickness
of the anodic film to protect them.
The aluminium extrusion is then sealed in hot deionozed water which closes of pores and
permanently seals in the color particles.
The coloring process in combination with anodizing is to yield a finish which is light fast,
abrasion and corrosion resistance and unchanging color intensity. For normal and severe
atmosphere condition, film thickness from 10 to 25 microns respectively should be
recommended.
ALLOY 6063
Description of Alloy
Alloy 6063 provides a good combination of extrudability and mechanical properties. Its
excellent extrudability allows thin-walled hollow shapes, intricate solids, and other that are
usually difficult to extrude with satisfactory finish, to be produced more easily. It respons well
to polishing, chemical brightening, anodizing and dyeing.
Characteristics
Welding Alloy 6063 is readily welded by the MIG and TIG processes
Machining Readily machined in all tempers givens
Forming All tempers maybe in formed the softer tempers accepting more severe forming
Corrosion Excellent resistance to the atmosphere. Particulary suitable for anodizing for
architectural applications
Tempers Available
Extruded shapes – F, T4, T5 and T6
Physical Properties
Density 2.71 x 10-6 kg/mmȜ
Melting Range 600-650˚C
Specific Heat between 0-100˚C 879 J/kg deg C
Coefficient of Linear Expansion between 20-200˚C 23x10-6 deg C
Thermal Conductivity at 100˚C 201 W/m deg C
Electrical Resistively at 20˚C 0.033µAm
Modulus of Elasticity 69x10з MPa

CHEMICAL COMPOSITION
Alloy Si(%) Fe(%) Cu(%) Mn(%) Mg(%) Cr(%) Zn(%) Ti(%) Others(%) AI(%)
6061 0.4◦-0.8 0.70 0.15-0.4 0.15 0.80-1.2 0.40-0.35 0.25 0.15 0.15 Reminder
6063 0.20-0.6 0.35 0.10 0.10 0.45-0.9 0.10 0.10 0.10 0.15 Reminder
6106 0.30-0.6 0.35 0.25 0.10 0.40-0.80 0.20 0.10 0.00 0.10 Reminder
Note : Composition in percent maximum unless shown as a range.
MECHANICAL PROPERTIES
Minimum Yield Minimum Elongation’s in 50mm

Alloy Temper Strenght Ultimate Tensile apply for thickness up
(MPa) Strength (MPa) throught 12.50mm in 5D
(5.65VA)
6061 T4 115 190 14%
T6 240 280 7%
6063 F - 100 12%
T4 70 130 14%
T5 110 150 7%
PT.INKASA JAYA ALUMINIUM
INKALUM
CONTENTS
I.BARS
1.FLAT BARS HAL.02-03
2.SQUARE BARS HAL.04
3.ROUND BARS HAL.05-06
4.HEXAGON HAL.07
II.ANGLES
1.EQUAL ANGLES HAL.08-09
2.UNEQUAL ANGLES HAL.10-11
III.CHANNELS
1.EQUAL CHANNELS HAL.12
2.UNEQUAL CHANNELS HAL.13
IV.HOLLOWS
1.SQUARE HOLLOWS HAL.14-19
2.RECTANGULAR HOLLOWS HAL.20-24
3.ROUND TUBE HAL.25-34
V.SPANDRELS HAL.35-38
VI.SHOP FRONT
1.SHOP FRONT 3" X 1.5" HAL.39-42
2.SHOP FRONT 4" X 1.75" HAL.43-46
VII.DOOR
1.SWING DOORS HAL.47-55
2.SLIDING DOORS HAL.56-59
3.ROLLING DOORS HAL.60-65
4.DOOR JAMB HAL.66
VIII.CURTAIN RAILS HAL.67
IX.WINDOWS
1.CASEMENT WINDOWS HAL.68-70
2.WINDOW WALLS HAL.71-73
3.SLIDING WINDOWS HAL.74-75
X.CURTAIN WALLS HAL.76-82
XI.TRANSPORT HAL.83
XII.LOUVERS HAL.84
XIII.SHOW CASES HAL.85-97
XIV.TRIMINGS HAL.98-101
XV.OTHERS HAL.102-104
PAGE 01
INKALUM
FLAT BARS Group : I - 1 (1)
T
A
SECTION A T W P
NO MM MM KG/M MM REMARK
1302 10,00 4,00 0.108 28.00 -
1305 16.00 3.00 0.130 38.00 -
1306 18.90 3.00 0.154 43.80 -
1307 19.00 0.90 0.046 39.80 -
1307A 19.00 8.00 0.412 54.00 -
1308 20.00 3.00 0.163 46.00 -
1309 24.50 12.00 0.797 73.00 -
1310 25.00 3.00 0.203 56.00 -
1311A 25.00 5.00 0.325 64.10 STRIPE
1312 25.00 6.00 0.407 62.00 -
1313 32.00 3.00 0.260 70.00 -
1314 32.00 6.00 0.520 76.00 -
0167 35.00 8.00 0.758 283.53 -
1315 38.10 6.00 0.620 88.20 -
1316 40.00 3.00 0.325 86.00 -
1317 40.00 5.00 0.542 90.00 -
1318 40.00 6.00 0.650 92.00 -
1319 44.50 4.00 0.473 93.57 FULL RADIUS
1320 42.60 4.00 0.462 93.37 CENTER LINE
1321 50.00 3.00 0.407 106.00 -

1322 50.00 5.00 0.678 110.00 -
1323 50.00 6.00 0.813 112.00 -
1324 50.00 8.00 1.084 116.00 -
1325 50.00 9.00 1.220 118.00 -
1326 50.00 10.00 1.335 120.00 -
1327 50.80 4.00 0.541 106.17 -
PAGE 02
INKALUM
FLAT BARS Group : I - 1 (2)
T
A
SECTION A T W P
1328 50.80 6.35 0.874 114.30 -
1329 51.00 9.00 1.244 120.00 -
1330 55.00 5.15 0.768 120.30 -
1331 60.00 1.90 0.412 163.80 -
1332 70.00 2.00 0.379 144.00 -
1333 74.00 2.10 0.421 152.20 -
0157 75.00 8.00 1.625 165.14 -
1334 80.00 1.00 0.217 162.00 -
1335 80.00 3.00 0.650 166.00 -
1336 80.00 6.00 1.301 172.00 -
1337 80.00 10.00 2.168 180.00 -
1338 80.00 16.00 3.469 192.00 -
1339 90.00 2.00 0.488 184.00 -
1340 94.00 23.00 5.859 234.00 -
1341 98.00 32.00 8.499 260.00 -
1342 98.00 40.00 10.623 276.00 -
1343 98.00 42.00 11.154 280.00 -
1344 100.00 6.00 1.626 212.00 -
1345 100.00 10.00 2.710 219.14 RADIUS 0.50
1346 100.00 12.00 3.252 224.00 -

1347 100.00 16.00 4.336 232.00 -
1348 100.00 20.00 5.420 240.00 -
1349 100.00 25.00 6.775 250.00 -
1350 101.60 9.00 2.480 221.20 -
1351 150.00 6.00 2.439 312.00 -
1354 150.00 10.00 4.065 340.00 -
1352 150.00 20.00 8.130 340.00 -
1353 160.00 10.00 4.336 340.00 -
PAGE 03
INKALUM
SQUARE BARS Group I - 2 (1)
30.00
R4
.00
15.20
30.00
15.20
SECTION NO:2571BR SECTION NO:2509BR
W=2.402 KG/M W=0.544 KG/M
P=113.13 MM P=56.80 MM
TY
PR
0.70
30.00
10.00
10.00
30.00
SECTION NO:0101 SECTION NO:1371

W=0.271 KG/M W=2.437 KG/M
P=40.00 MM P=118.80 MM
PAGE 04
INKALUM
ROUND BARS Group I - 3 (1)
SECTION A T W P
2701 4.76 - 0.048 4.954 -
2702 5.50 - 0.064 17.28 -
2703 6.00 - 0.077 18.85 -
2704 6.20 - 0.082 19.48 -
2705 7.00 - 0.104 21.99 -
2706 7.80 - 0.129 24.50 -
2737 8.00 - 0.136 25.13 -
2707 8.20 - 0.143 25.76 -
2708 8.50 - 0.154 26.27 -
2710 9.00 - 0.172 28.27 -
2711 9.50 - 0.192 29.85 -
2712 10.00 - 0.213 31.42 -
2745 11.00 - 0.258 34.56 -
2746 11.50 - 0.281 36.13 -
2747 12.00 - 0.307 37.70 -
2716 12.70 - 0.343 39.90 -
2717 14.10 - 0.423 44.30 -
2718 16.00 - 0.545 50.27 -
2738 16.50 - 0.579 51.84 -
2719 18.10 - 0.697 59.85 -
2720 19.05 - 0.772 56.55 -
2721 19.20 - 0.785 60.32 -
2739 19.50 - 0.809 61.26 -
2722 22.00 - 1.030 69.12 -
2140 23.00 - 1.126 415.48 -
PAGE 05
INKALUM
ROUND BARS Group I - 3 (2)
SECTION A T W P
2723 25.40 - 1.373 79.80 -
2724 28.00 - 1.669 87.96 -
2725 31.75 - 2.146 99.75 -
2726 32.50 - 2.248 102.10 -
2727 41.00 - 3.578 128.81 -
2728 51.00 - 5.536 160.22 -
2729 55.00 - 6.438 172.79 -
2730 61.00 - 7.920 191.64 -
2709 85.00 - 15.378 267.04 -
2733 90.00 - 17.240 282.74 -
2732 101.00 - 21.971 319.19 -
2734 120.00 - 30.649 376.99 -
2735 127.00 - 34.329 398.98 -
2736 152.40 - 49.343 478.78 -
PAGE 06
INKALUM
HEXAGON Group I - 4 (1)
8.66
22.20
7.50
25.63

W=2.402 KG/M W=0.544 KG/M
P=113.13 MM P=56.80 MM
17.00
19.05
22.00 19.63

W=0.799 KG/M W=0.625 KG/M
P=66.00 MM P=58.89 MM
PAGE 07
EQUAL ANGLES Group : II - 1 (1)
T
A
A
SECTION A T W P
1001 7.00 0.60 0.022 28.00 -
1002 7.00 0.70 0.025 28.00 -
1003 8.00 0.70 0.029 32.00 -
1005 10.00 0.60 0.032 40.00 -
1006 10.00 0.70 0.036 40.00 -
1007 12.00 0.60 0.038 48.33 VEE GROOVE
1008 12.00 0.70 0.044 47.85 VEE GROOVE
1009 12.00 0.70 0.044 48.00 -

1010A 12.70 0.60 0.040 50.37 -
1010B 12.70 0.70 0.047 50.80 -
1010 12.70 1.00 0.066 50.80 -
1012 13.00 0.60 0.041 52.00 -
1013 15.00 0.60 0.048 60.00 -
1014 15.00 0.70 0.056 60.00 -
1016 16.00 0.60 0.051 64.00 -
1017 16.00 1.60 0.132 64.00 -
1018 17.00 0.70 0.063 68.00 -
1019A 19.00 0.70 0.071 76.00 -
0102 19.00 1.20 0.120 76.00 -
1019 19.05 0.80 0.081 76.20 -
1020 20.00 0.60 0.064 80.00 -
1022 20.00 0.65 0.069 80.00 -
1024 25.00 0.60 0.072 90.00 -
PAGE 08
EQUAL ANGLES Group : II - 1 (2)
T
A
A
SECTION A T W P
1023A 25.00 0.70 0.094 100.00 -
0103 25.00 1.20 0.159 100.00 -
1023 25.00 1.60 0.210 100.00 -
1023B 25.00 3.00 0.382 100.00 -
1025A 25.40 0.60 0.081 101.17 -
1025B 25.40 1.00 0.135 101.60 -
1026 26.00 0.70 0.097 104.00 -
1027A 32.00 0.60 0.103 128.00 -
1027 32.00 3.00 0.496 128.00 -
1028 34.00 0.60 0.110 136.00 -
1029 34.00 0.70 0.128 136.00 -
1030 35.00 2.00 0.369 140.00 -
1031A 38.10 0.60 0.123 151.97 -
1032 38.10 1.35 0.274 152.40 -
1033 38.10 1.50 0.304 152.40 -
1034 40.00 1.60 0.340 160.00 -
1036 40.00 3.00 0.626 160.00 -
1035 40.00 4.00 0.824 160.00 -
1037 40.00 6.00 1.203 160.00 -
1045 50.00 1.00 0.268 200.00 -
1038 50.00 1.20 0.321 200.00 -
1039 50.00 1.80 0.479 200.00 -
1040 50.00 3.00 0.789 200.00 -
1041 50.00 6.00 1.528 200.00 -
1042 55.00 15.00 3.862 220.00 -
1043 80.00 6.00 2.504 320.00 -
1044 50.00 10.00 4.086 317.42 INSIDE R6
PAGE 09
INKALUM
UNEQUAL ANGLES Group : II - 2 (1)
SECTION A B T W P
NO MM MM MM KG/M MM REMARK
1200 13.00 6.00 3.00 0.130 38.00 -
1201 14.00 12.00 1.15 0.077 52.00 -
1201B 14.00 12.00 1.20 0.080 50.97 FULL RADIUS
1202A 16.00 14.00 1.50 0.115 60.00 -

1202B 16.00 14.00 1.70 0.130 60.00 -
1216 18.00 11.00 1.20 0.090 58.00 -
1204 19.05 8.00 2.00 0.136 54.10 -
1203 20.00 8.00 1.15 0.084 56.00 -
1205 21.00 8.50 1.30 0.099 59.00 -
1206 21.00 8.70 1.50 0.115 59.40 -
1207 22.00 11.00 0.70 0.061 66.00 -
1208 23.00 14.00 1.60 0.153 74.00 -
1208A 23.00 14.00 1.70 0.163 74.00 -
1209 25.00 9.00 1.70 0.149 68.00 -
1210 25.00 12.50 1.15 0.113 75.00 -
1210A 25.00 12.50 1.40 0.137 74.57 -
1211 26.00 13.00 1.70 0.172 78.00 -
1213A 26.00 13.00 1.40 0.143 78.00 -
1213B 26.00 13.00 1.20 0.123 78.00 -
1224 26.50 12.50 1.20 0.121 78.00 -
1212B 26.50 12.50 1.35 0.138 78.00 -
1212 26.50 13.00 1.30 0.135 79.00 -
1214 27.00 14.00 1.65 0.176 82.00 -
1215 27.40 24.80 1.10 0.152 104.22 VEE GROOVE
1215A 27.40 24.80 1.20 0.166 104.22 VEE GROOVE
PAGE 10
INKALUM
UNEQUAL ANGLES Group : II - 2 (2)
SECTION A B T W P
NO MM MM MM KG/M MM REMARK
1217 27.50 13.75 1.35 0.146 82.50 -
1218 27.50 24.90 1.20 0.165 104.36 VEE GROOVE
1219 29.00 15.00 1.70 0.195 88.00 -

1219A 29.00 14.00 1.70 0.190 86.00 -
1220 35.00 20.00 4.00 0.553 110.00 -
1221 38.00 19.00 2.00 0.298 114.00 -
1222 40.00 16.60 1.60 0.238 113.20 -
1223 40.00 25.00 3.00 0.504 130.00 -
0132 45.00 35.00 8.00 1.535 153.56 -
PAGE 11
INKALUM
EQUAL CHANNELS Group : III - 1 (1)
A
A
SECTION A T W P
1900 6.30 0.90 0.042 36.00 -
1901 7.00 0.60 0.032 40.28 -
1934 7.00 0.70 0.048 53.00 -
1932 8.00 0.60 0.037 48.00 STRIPE
1931 9.00 0.60 0.042 52.28 -

1931A 9.00 0.60 0.041 53.00 STRIPE
1902 9.50 0.90 0.065 55.20 -

1933 12.00 0.60 0.056 71.60 STRIPE
1903 12.50 0.90 0.087 73.20 -

0182 12.70 0.70 0.070 74.80 -
1904 12.70 1.00 0.098 74.20 -
1800 15.00 0.70 0.083 88.60 -
1905 15.88 0.75 0.094 93.78 -
1906 15.88 0.90 0.112 93.43 -
1907 15.88 1.00 0.124 93.28 -
1908 19.05 2.50 0.353 109.30 -
1909 19.05 0.75 0.113 112.50 -
1910 19.05 1.00 0.149 112.30 -
1911 25.40 0.75 0.152 150.60 -
1912 25.40 0.90 0.181 150.60 -
1913 55.00 2.00 0.818 306.00 -
PAGE 12
INKALUM
UNEQUAL CHANNELS Group : III - 2 (1)
B
A
SECTION A B T W P
NO MM MM MM KG/M MM
1914 7.00 12.00 0.60 0.048 60.03
1950 8.75 10.30 0.70 0.050 54.20
1952 9.00 8.00 0.60 0.039 48.80
1951 9.00 8.00 0.70 0.045 48.60
1953 13.00 25.00 1.40 0.228 123.20
1954 15.00 40.00 1.20 0.202 187.71
1918A 14.20 20.00 1.10 0.155 106.20
1919A 16.20 20.00 1.10 0.161 110.20
1801 21.00 19.00 1.80 0.270 114.40
1955 25.40 12.70 1.00 0.132 99.60
1920A 30.00 20.00 0.90 0.166 138.20
1956 35.00 10.00 1.20 0.171 107.60
1957 38.00 40.00 2.00 0.618 232.00
1958 40.00 20.00 3.00 0.602 174.00
1959 40.00 25.00 3.00 0.683 174.00
0104 50.00 12.00 0.90 0.176 146.20
1960 53.00 23.40 1.30 0.342 197.00
1924A 60.00 30.00 0.90 0.288 238.20
1961 60.00 32.00 3.00 0.959 242,000
1962 60.00 43.00 2.00 0.770 288.00
1963 75.00 12.29 1.00 0.268 199.60
1964 101.60 50.80 6.92 3.754 388.85
PAGE 13
INKALUM
SQUARE HOLLOWS Group : IV - 1 (1)
A
R R
T
A
R R
SECTION A T RADIUS W P
NO MM MM CORNER KG/M MM
2503 7.00 0.60 - 0.042 28.00
2500A 9.00 0.60 - 0.054 26.00
2501 10.00 0.60 - 0.061 40.00
2502 11.00 0.60 - 0.068 44.00
2504A 11.00 0.65 0.30 0.073 43.48
2504 11.00 0.70 0.30 0.078 43.38
2505 11.50 0.70 - 0.082 46.00
2506 12.00 0.70 - 0.086 48.00
2507 13.00 0.60 - 0.081 52.00
2508 14.00 0.60 - 0.087 56.00
2509 15.00 0.60 - 0.094 60.00
2510 15.00 0.65 - 0.101 60.00
2511 15.00 0.70 - 0.109 60.00
2512 15.00 1.50 - 0.220 60.00
2512R 15.00 1.50 1.50 0.215 57.42
2513 16.00 0.60 - 0.100 64.00
2514 16.00 0.60 0.30 0.100 63.48
2515 16.00 0.70 - 0.116 64.00
2516 16.00 0.65 - 0.108 64.00
2517 16.00 1.00 - 0.163 64.00
2518 17.00 0.65 - 0.115 68.00
2519 17.00 0.60 0.30 0.107 67.48
2520 17.00 0.70 - 0.124 68.00
2522 18.00 0.60 - 0.113 72.00
2521 18.00 0.65 - 0.122 72.00
PAGE 14
INKALUM
A
R R
T
A
R R
2523 18.00 0.70 - 0.131 72.00
2522 18.00 0.60 - 0.113 76.00
2525 19.00 0.60 - 0.120 76.00
2524 19.00 1.50 - 0.285 76.00
2526 19.00 1.70 - 0.319 76.00
2527 19.05 0.65 - 0.130 76.20
2528 19.05 1.00 - 0.196 76.20
2531 20.00 0.60 - 0.126 80.00
2532 20.00 0.70 - 0.146 80.00
2529 20.00 0.80 - 0.167 80.00
2534 20.00 1.20 - 0.245 80.00
2591 20.00 1.20 2.00 0.237 76.57
2534A 20.00 1.40 1.40 0.279 77.59
2535 20.00 1.50 - 0.301 80.00
2535A 20.00 2.00 2.00 0.376 75.71
2530 20.00 3.00 3.00 0.532 74.85
2537 21.00 0.60 - 0.133 84.00
2533 21.00 0.65 - 0.143 84.00
2536 21.00 0.70 - 0.154 84.00
2539 21.40 1.60 2.50 0.331 81.31
2538 22.00 1.50 - 0.333 88.00
2542 22.50 0.60 - 0.140 90.00
2543 23.00 0.60 - 0.146 92.00
2544 23.00 0.65 - 0.157 92.00
2545 23.00 1.00 - 0.238 92.00
PAGE 15
INKALUM
A
R R
T
A
R R
2546 23.00 2.00 - 0.455 92.00
2547 23.50 0.60 - 0.149 94.00
2548 23.50 0.65 0.161 94.00
2549 23.50 0.70 - 0.173 94.00
2550A 25.00 0.70 - 0.184 100.00
2551 25.00 0.80 - 0.210 100.00
2590 25.00 1.20 - 0.302 96.57
2553 25.00 1.50 1.00 0.380 93.28
2563RA 25.00 1.50 1.50 0.383 97.42
2554 25.00 1.60 - 0.406 100.00
2555 25.00 1.60 1.50 0.401 97.42
2556 25.00 1.60 3.20 0.388 94.51
2557 25.00 1.70 - 0.429 100.00
2559 25.00 1.80 - 0.453 100.00
2558A 25.00 2.00 2.50 0.484 95.70
2560 25.00 2.00 4.00 0.471 93.13
2561 25.00 2.50 - 0.607 98.28
2562 25.00 3.00 - 0.715 100.00
2564 25.00 3.00 3.00 0.694 94.85
2566 25.40 1.00 - 0.264 101.60
2563R 25.40 1.50 1.50 0.385 99.02
2568 25.40 2.80 - 0.686 101.60
2569 26.00 1.40 2.50 0.361 99.71
2570 27.00 1.50 2.90 0.400 103.02
2571 30.00 1.50 - 0.463 120.00
PAGE 16
INKALUM
A
R R
T
A
R R
2567A 30.00 1.90 1.90 0.570 116.73
2572 31.70 1.60 4.50 0.495 119.07
2573 32.00 1.50 - 0.496 128.00
2575 32.00 1.60 4.50 0.500 120.27
2576 32.00 2.00 - 0.65 128.00
2577 32.00 3.00 - 0.943 128.00
2580 37.50 1.40 0.70 0.547 148.80
2574B 38.00 1.00 - 0.401 152.00
2574TB 38.00 1.20 - 0.479 152.00
2574R 38.00 1.30 3.00 0.503 146.85
2574C 38.00 2.00 2.00 0.780 148.57
2574A 38.10 0.90 - 0.363 152.40
2578A 40.00 1.00 - 0.423 160.00
2578B 40.00 1.20 - 0.505 160.00
2592 40.00 1.40 - 0.586 160.00
2593 40.00 1.80 - 0.745 160.00
2582 40.00 1.85 - 0.765 160.00
2579R 40.00 2.00 2.00 0.816 158.71
2585B 40.00 2.00 - 0.824 160.00
2582TB 40.00 3.00 - 1.203 160.00
2581 44.45 1.20 - 0.563 177.80
2581R 44.45 1.20 1.20 0.563 175.74
2581A 44.45 1.22 - 0.572 177.80
2583 45.00 2.50 - 1.152 180.00
2584 50.00 1.25 0.70 0.659 198.80
PAGE 17
INKALUM
A
R R
T
A
R R
2585 50.00 1.50 - 0.789 200.00
2586 50.00 1.60 3.00 0.823 194.85
2587A 50.00 2.00 - 1.041 200.00
2587R 50.00 2.00 1.00 1.076 198.28
2589R 50.30 1.70 2.00 0.886 197.77
2594 50.80 1.80 6.00 0.913 192.90
2595 50.80 2.03 - 1.073 203.20
2596 50.80 3.18 4.75 1.642 195.05
2597 70.00 1.50 - 1.114 280.00
2598 75.00 1.60 - 1.273 300.00
2599 76.00 6.20 16.00 4.319 276.53
2588 90.00 1.40 - 1.345 360.00
PAGE 18
INKALUM
SQUARE HOLLOWS (OTHER) Group : IV - 1 (6)
R
T
A
A
NO MM MM KG/M MM
2400R 19.80 0.65 8.50 0.129 75.55
2599R 20.00 0.60 8.50 0.120 76.35
2531BR 20.00 0.65 8.50 0.130 76.35
2542R 22.50 0.60 8.50 0.137 86.35
2602R 23.00 0.60 8.50 0.140 88.35
2544R 23.00 0.65 8.50 0.151 88.35
2548R 23.50 0.65 8.50 0.155 90.35
2551R 25.00 0.80 8.50 0.202 96.35
2551RTP 25.00 0.70 8.50 0.178 96.37
2401R 27.50 1.50 8.00 0.410 106.57
2402R 27.50 1.80 8.00 0.487 106.57
2403R 32.05 2.00 8.00 0.635 124.77
PAGE 19
INKALUM
RECTANGULAR HOLLOWS Group : IV - 2 (1)

A
R R
B
R R
SECTION A B T W P RADIUS
NO MM MM MM KG/M MM CORNER
2600 13.00 8.00 0.60 0.064 42.00 -
2601 14.00 10.00 0.60 0.074 48.00 -
2602 16.00 10.00 0.60 0.081 52.00 -
2603 16.00 10.00 0.65 0.087 52.00 -
2604 17.00 10.00 0.60 0.084 54.00 -
2605 18.00 10.00 0.60 0.087 56.00 -
2606 18.00 10.00 0.65 0.094 56.00 -
2607 18.00 10.00 0.65 0.093 56.99 STRIPE
2608 18.00 10.00 0.70 0.101 52.00 -
2609 19.00 10.00 0.60 0.090 58.00 -
2609A 19.90 11.95 0.60 0.098 56.99 STRIPE
2610 20.00 10.00 0.60 0.094 60.00 -
2611 20.00 12.00 0.65 0.106 65.60 STRIPE
2612 20.00 12.00 0.75 0.123 64.00 -
2613 21.00 10.00 0.65 0.105 62.00 -
2614 21.00 11.00 0.60 0.100 64.00 -
2615 21.00 11.00 0.65 0.108 64.00 -
2616 21.00 11.00 0.70 0.116 64.00 -
2617 22.00 10.00 0.60 0.103 64.00 -
2805 22.50 11.00 0.60 0.105 67.00 -
2618 23.00 17.00 0.65 0.136 80.00 -
2619 23.50 11.70 0.60 0.111 70.40 -
2620 23.50 11.70 0.65 0.119 70.40 -
2621 23.50 11.70 0.70 0.128 70.40 -
2622 25.00 12.50 0.80 0.156 75.00 -
PAGE 20
INKALUM

A
R R
B
R R
2623 25.00 18.00 0.65 0.147 88.00 -
2624 25.00 19.00 0.70 0.162 88.00 -
2625 25.40 19.05 1.10 0.252 88.90 -
2626 26.00 17.00 0.65 0.147 86.00 -
2627 28.00 18.00 0.60 0.146 92.00 -
2628 28.00 18.00 0.65 0.157 92.00 -
2629 28.00 22.00 2.00 0.496 98.28 1.00
2630AR 30.00 15.00 1.50 0.336 87.42 1.50
2630 30.00 20.00 0.60 0.159 100.00 -
2631 30.00 20.00 0.65 0.172 100.00 -
2632 30.00 20.00 0.65 0.160 93.13 4.00
2633 30.00 20.00 0.70 0.184 100.00 -
2634 30.00 20.00 0.70 0.179 95.57 2.00
2635 31.00 21.00 0.60 0.165 104.00 -
2636 33.00 21.00 0.60 0.172 108.00 -
2637 33.00 21.00 0.65 0.186 108.00 -
2638 33.00 21.00 0.70 0.200 108.00 -
2639 34.00 22.00 0.65 0.193 111.48 0.30
2640 34.00 22.00 0.70 0.207 111.48 0.30
2641 34.50 23.00 0.60 0.183 115.00 -
2804 34.50 23.00 0.70 0.213 115.00 -
2642 35.00 20.00 1.50 0.423 110.00 -
2643 35.00 28.00 2.00 0.637 124.28 1.00
2676 38.00 16.00 1.40 0.374 102.85 3.00
2645 38.00 25.00 0.80 0.266 126.00 -
PAGE 21
INKALUM
A
R R
B
R R
2646 38.00 25.00 1.50 0.472 120.85 -
2647 38.10 25.40 0.90 0.301 127.00 -
2648 38.10 25.40 1.00 0.333 127.00 -
2649 38.10 25.40 2.54 0.804 127.00 -
2675 40.00 20.00 1.20 0.364 115.71 2.50
2650 40.00 20.00 1.50 0.462 118.80 0.70
2650A 40.00 20.00 1.50 0.458 117.42 1.50
2650C 40.00 20.00 2.00 0.579 113.13 4.00
2651 44.00 22.00 0.70 0.245 132.00 -
2652 45.00 22.50 0.70 0.251 135.00 -
2653 46.00 23.00 0.60 0.220 138.00 -
2654 46.00 24.00 0.60 0.224 140.00 -
2655 50.00 25.00 1.60 0.623 150.00 -
2656 50.00 25.00 1.60 0.606 144.85 3.00
2657 50.00 25.00 3.00 1.122 150.00 -
2658 50.00 25.00 3.00 1.102 144.85 3.00
2677 50.00 40.00 3.00 1.366 180.00 -
2660 50.80 25.40 1.00 0.402 152.40 -
2660A 50.80 25.40 0.90 0.363 152.40 -
2661AR 60.00 15.00 1.50 0.581 147.42 1.50
2662 60.00 40.00 1.40 0.738 200.00 -
2803 60.00 40.00 1.60 0.837 198.28 1.00
2663 60.00 40.00 3.00 1.528 200.00 -
2664 65.00 16.00 1.20 0.498 156.85 3.00
2665 65.00 16.00 1.40 0.578 124.28 3.00
PAGE 22
INKALUM
A
R R
B
R R
2814 65.00 28.00 1.15 0.534 178.18 6.00
2677 70.00 25.00 1.70 0.844 189.31 -
2678 75.00 50.00 3.00 1.935 250.00 -
2679 76.20 25.40 1.00 0.540 203.20 -
2675A 76.20 25.40 0.85 0.460 203.20 -
2680 76.20 25.40 2.36 1.239 203.20 -
2681 76.20 38.10 3.00 1.761 228.60 -
2682 80.00 16.00 1.40 0.692 186.85 186.85
2683 80.00 25.00 3.00 1.610 210.00 -
2684 80.00 40.00 2.30 1.439 240.00 -
2666 80.00 50.00 3.00 2.016 260.00 -
2667 100.00 10.00 1.20 0.700 220.00 -
2669 100.00 50.00 3.00 2.341 300.00 -
2668A 101.60 25.40 1.00 0.678 254.00 -
2670 101.60 44.45 1.00 0.781 254.00 -
2671 101.60 25.40 2.80 1.842 254.00 -
2672 101.10 50.80 4.50 3.485 303.80 -
2673 150.00 50.00 2.00 2.125 400.00 -
2674 150.00 50.00 3.00 3.154 400.00 -
PAGE 23
INKALUM
RECTANGULAR HOLLOWS (OTHERS) Group : IV - 2 (5)
R
T
B
A
NO MM MM MM KG/M MM
2807 33.00 21.00 0.60 0.166 104.35 8.50
2808 33.00 21.00 0.65 0.179 104.35 8.50
2689 34.50 23.00 0.60 0.177 111.35 8.50
2809 37.00 24.00 0.85 0.265 118.35 8.50
2810 38.00 25.00 0.80 0.259 112.35 8.50
2811 39.00 27.50 1.50 0.504 129.57 8.00
2812 39.00 27.50 1.80 0.599 129.57 8.00
PAGE 24
INKALUM
ROUND TUBE Group : IV - 3 (1)
SECTION A T W P
NO MM MM KG/M MM
2101 6.00 0.60 0.028 18.85
2001 6.10 0.70 0.032 19.16
2103 7.00 0.60 0.033 21.99
2002 7.00 0.65 0.035 21.99
2003 7.00 0.70 0.038 21.99
2106 7.50 0.60 0.035 23.56
2004 7.50 0.70 0.041 23.56
2108 8.00 0.60 0.038 25.13
2005 8.00 0.90 0.054 25.13
2006 8.00 1.00 0.060 25.13
2007 8.10 0.70 0.044 25.45
2008 8.20 0.65 0.042 25.76
2114 8.50 0.60 0.040 26.70
2009 8.50 0.65 0.043 26.70
2116 8.50 0.80 0.052 26.70
2011 8.50 0.70 0.046 26.70
2013 8.50 1.00 0.064 26.70
2014 9.00 0.60 0.043 28.27
2245 9.50 1.00 0.072 29.85
2015 9.53 0.70 0.053 29.94
2017 9.53 1.20 0.085 29.94
2018 9.53 1.50 0.102 29.94
2019 9.60 0.70 0.053 29.94
2125 10.00 0.60 0.050 31.42
PAGE 25
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2126 10.00 0.90 0.070 31.42
2021 10.20 2.00 0.140 32.40
2128 10.50 0.60 0.051 32.98
2022 10.50 0.65 0.055 32.98
2130 11.00 0.60 0.053 34.56
2024 11.00 1.00 0.085 34.56
2025 11.00 3.25 0.214 34.56
2026 11.40 0.65 0.059 35.81
2027 11.40 0.70 0.064 35.81
2028 11.50 1.00 0.089 36.13
2029 11.60 2.00 0.163 36.44
2030 12.00 0.60 0.058 37.70
2031 12.00 0.65 0.063 37.70
2032 12.00 0.90 0.085 37.70
2033 12.70 0.70 0.072 39.90
2034 12.70 0.80 0.081 39.90
2035 12.70 0.91 0.091 39.39
2036 12.70 1.00 0.100 39.90
2144 12.70 1.20 0.117 39.90
2038 12.70 1.30 0.126 39.90
2039 12.70 1.50 0.143 39.90
2040 12.70 2.50 0.217 39.90
2149 13.00 0.60 0.063 40.84
2041 13.00 0.65 0.068 40.84
2152 14.00 0.60 0.068 43.98
PAGE 26
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2153 14.00 0.65 0.074 43.98
2153A 14.00 1.20 0.131 43.98
2043 14.30 2.00 0.209 44.93
2044 14.50 0.65 0.077 45.55
2045 14.50 0.70 0.082 45.55
2046 15.00 0.65 0.079 47.12
2047 15.00 0.70 0.085 47.12
2048 15.00 1.00 0.119 47.12
2049 15.00 2.50 0.266 47.12
2050 15.80 1.00 0.126 49.64
2051 15.88 0.90 0.115 49.89
2052 15.88 1.00 0.127 49.89
2053 15.88 1.20 0.150 49.89
2054 15.88 1.42 0.175 49.89
2055 15.88 1.60 0.195 49.89
2056 15.88 3.00 0.329 49.89
2167A 16.00 0.60 0.079 50.27
2057 16.00 0.70 0.091 50.27
2060 16.00 1.00 0.128 50.27
2171 16.00 1.20 0.151 50.27
2061 16.00 1.30 0.163 50.27
2062 16.00 1.60 0.196 50.27
2171A 16.00 2.00 0.238 50.27
2174 16.50 0.60 0.081 51.84
2176 17.00 0.60 0.084 53.41
PAGE 27
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2063 17.00 1.60 0.210 53.41
2064 17.00 0.65 0.090 53.41
2065 17.50 0.65 0.093 54.98
2067 17.50 0.70 0.100 54.98
2182 18.00 0.60 0.089 56.55
2068 18.00 0.65 0.096 56.55
2069 18.00 0.70 0.103 56.55
2070 18.00 0.85 0.124 56.55
2071 18.00 1.00 0.145 56.55
2072 18.00 1.20 0.172 56.55
2073 18.00 5.00 0.533 56.55
2074 19.00 0.60 0.094 59.69
2075 19.00 0.65 0.102 59.69
2076 19.00 0.70 0.109 59.69
2077 19.00 0.85 0.131 59.69
2193 19.00 1.20 0.182 59.69
2078 19.00 1.50 0.223 59.69
2079 19.00 1.70 0.250 59.69
2080 19.00 2.00 0.289 59.69
2196A 19.00 3.00 0.409 59.69
2198A 19.05 0.60 0.094 59.85
2198 19.05 0.65 0.102 59.85
2084 19.05 0.80 0.124 59.85
2198B 19.05 0.90 0.139 59.85
2083 19.05 1.03 0.157 59.85
PAGE 28
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2086 19.20 1.00 0.155 60.32
2087 19.40 0.60 0.096 60.95
2203A 19.50 0.60 0.097 61.23
2204 20.00 0.60 0.099 62.83
2088 20.00 0.65 0.107 62.83
2089 20.00 0.70 0.115 62.83
2207 20.00 1.50 0.238 62.83
2090 20.00 1.60 0.251 62.83
2091 20.35 1.50 0.241 63.93
2092 20.50 1.30 0.212 64.40
2211 21.00 0.60 0.104 65.97
2093 21.00 0.70 0.121 65.97
2094 21.00 0.65 0.113 65.97
2095 21.00 2.00 0.324 65.97
2096 21.50 0.60 0.107 67.54
2097 21.50 1.50 0.255 67.54
2098 22.00 0.65 0.118 69.12
2099 22.00 0.70 0.127 69.12
2100 22.00 0.90 0.161 69.12
2104 22.00 1.30 0.229 69.12
2212 22.00 1.40 0.246 69.12
2246 22.00 1.20 0.212 69.12
2105 22.00 2.00 0.341 69.12
2107 22.00 3.00 0.485 69.12
2224A 23.00 0.60 0.114 72.26
PAGE 29
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2224 23.00 0.70 0.133 72.26
2109 23.00 2.00 0.358 72.26
2227 24.00 0.70 0.139 75.40
2110 24.00 0.80 0.158 75.40
2228 25.00 0.70 0.145 78.54
2111 25.00 0.90 0.185 78.54
2112 25.00 1.00 0.204 78.54
2113 25.00 1.10 0.224 78.54
2229 25.00 1.20 0.243 78.54
2115 25.00 1.30 0.262 78.54
2235 25.00 1.50 0.300 78.54
2118 25.00 1.70 0.377 78.54
2120 25.00 1.80 0.356 78.54
2122 25.00 3.00 0.562 78.54
2248 25.20 2.50 0.483 79.17
2123 25.40 0.90 0.188 79.80
2241A 25.40 0.95 0.198 79.80
2124 25.40 3.00 0.572 79.80
2247 25.75 1.50 0.310 80.90
3005 8.50 0.75 0.049 26.70
2129 26.00 1.40 0.293 81.68
2237 26.00 1.85 0.380 81.68
2131 26.00 3.00 0.587 81.68
2132 26.50 1.50 0.313 83.25
2133 26.50 1.30 0.279 93.25
PAGE 30
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2234 27.00 0.60 0.135 84.82
2135 28.00 0.60 0.140 87.97
2236 28.00 1.60 0.360 87.97
2238A 28.50 0.60 0.143 89.54
2238 28.50 1.50 0.345 89.54
2139 29.00 4.50 0.939 91.11
2256 30.00 1.20 0.294 94.25
2257 30.00 2.25 0.532 94.25
2141 31.75 1.00 0.262 99.75
2142 31.75 1.10 0.288 100.22
2143 32.00 0.70 0.187 100.53
2145 32.00 1.40 0.365 100.53
2146 32.00 1.50 0.390 100.53
2147 32.00 2.00 0.511 100.53
2148 32.00 3.00 0.741 100.53
2150 33.00 0.60 0.165 103.67
2151 33.00 1.50 0.402 103.67
2155 33.00 1.60 0.428 103.67
2156 33.00 6.50 1.466 103.67
2268A 34.00 1.50 0.415 106.76
2157 35.00 1.50 0.428 109.96
2158 35.00 12.00 2.143 109.96
2159 37.00 1.40 0.424 116.24
2160 37.70 1.60 0.428 103.67
2161 38.00 1.50 0.466 119.38
PAGE 31
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2162 38.00 1.60 0.496 119.38
2163 38.00 4.50 1.283 119.38
2164 38.10 1.35 0.422 119.70
2270 38.10 2.00 0.615 119.70
2165 38.10 3.25 0.964 119.70
2166 38.10 8.00 2.050 119.70
2168 38.85 5.10 1.465 122.05
2169 38.85 6.425 1.774 122.05
2170 40.00 1.50 0.492 125.66
2248A 40.00 2.50 0.798 125.66
2172 40.00 3.00 0.945 125.66
2177 42.00 2.00 0.681 131.95
2178 43.00 0.70 0.252 135.09
2179 43.00 1.70 0.598 135.09
2180 43.00 1.85 0.648 135.09
2181 43.00 2.00 0.698 135.09
2183 44.45 3.25 1.140 136.64
2184 46.00 3.50 1.266 144.51
2185 48.00 4.47 1.657 150.80
2186 50.00 1.20 0.499 157.08
2187 50.00 1.50 0.619 157.08
2188 50.00 3.00 1.200 157.08
2189 50.00 4.00 1.567 157.08
2190 55.00 2.00 0.902 172.79
2191 56.00 3.00 1.354 175.93
PAGE 32
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2192 60.00 9.00 3.908 188.50
2194 63.50 6.35 3.090 199.49
2301 64.00 2.00 1.056 201.06
2195 66.00 6.00 3.065 219.91
2197 70.00 3.75 2.115 207.24
2199 76.00 8.00 4.631 238.76
2200 76.00 10.00 5.619 238.76
2201 76.20 1.00 0.640 239.39
2202 76.20 1.20 0.766 239.39
2205 76.20 1.30 0.829 239.39
2206 76.20 4.75 2.889 239.39
2208 76.20 5.50 3.311 239.39
2210 76.20 6.35 3.776 239.39
2213 77.00 3.00 1.890 241.90
2214 78.00 2.50 1.607 245.04
2215 78.00 3.50 2.220 245.04
2216 78.00 21.50 10.342 245.04
2217 80.00 1.60 1.066 251.33
2218 80.00 5.00 3.193 251.33
2219 81.00 6.00 3.831 254.47
2220 87.10 1.30 0.950 273.63
2221 88.00 2.50 1.820 276.46
2222 88.50 1.30 0.965 278.03
2322AR 88.90 1.20 0.896 279.29
2223 90.00 1.30 0.982 282.74
PAGE 33
INKALUM
SECTION A T W P
NO MM MM KG/M MM
2225 92.00 10.00 6.981 289.03
2226 94.00 11.00 7.773 295.31
2230 96.00 2.50 1.990 301.59
2231 96.00 3.00 2.375 301.59
2232 98.00 4.00 3.201 307.88
2233 99.00 1.40 1.163 311.02
2239 100.00 1.60 1.339 315.16
2240 100.00 2.00 1.669 315.16
2242 105.00 5.90 4.978 329.87
2243 107.00 4.00 3.508 336.15
2244 120.00 1.80 1.818 378.25
3001 25.00 2.00 0.392 78.54
3002 12.00 3.00 0.230 37.70
3004 26.00 5.00 0.894 81.68
3005 8.50 0.75 0.049 26.70
PAGE 34
INKALUM
ASSEMBLY DETAIL : SPANDRELS Group : V - 1
B B
STEEL FRAME
FRONT ELEVATION
PERSPECTIVE
DETAIL - A HOLLOW STELL
7016
STEEL FRAME
HOLLOW STELL
7016
SECTION B-B
PAGE 35
INKALUM
SPANDRELS Group : V - 1 (1)

0.60
3.90
SECTION NO:7010
W=0.161 KG/M
86.00 P=199.80 MM
86.00
7.60
SECTION NO:7027
W=0.173 KG/M
P=214.00 MM
0.60
88.00
6.10 SECTION NO:7013

W=0.173 KG/M
P=213.40 MM
0.60
88.10
7.30
SECTION NO:7016
W=0.202 KG/M
P=213.48 MM
0.70
88.50
8.05
SECTION NO:7024
W=0.193 KG/M
P=219.25 MM
0.65
88.60
7.90
SECTION NO:7022
W=0.208 KG/M
0.70
P=220.26 MM
PAGE 36
INKALUM
97.00
9.30
SECTION NO:7026
W=0.245 KG/M
0.75 P=242.20 MM
97.00
9.30
SECTION NO:7025
W=0.260 KG/M
0.80
P=241.80 MM
106.50

W=0.350 KG/M
P=260.86 MM
1.00
115.00
14.40
SECTION NO:7028
W=0.401 KG/M
1.00
P=296.19 MM
119.00
14.40
SECTION NO:7029
W=0.412 KG/M
1.00
P=304.191 MM
PAGE 37
INKALUM
86.00
SECTION NO:7032
W=0.158 KG/M
P=194.73 MM
0.60
4.00
95.00
SECTION NO:7012
4.50
0.60
W=0.181 KG/M
P=216.39 MM
135.75
5.70
0.80
SECTION NO:7015
W=0.341 KG/M
P=316.55 MM
PAGE 38
INKALUM
ASSEMBLY DETAIL : SHOP FRONT 3 INCH Group VI - 1
960414A
1
1
GLASS 2 4
6 7 8
GLAZING GASKET
3
GLAZING BLOCK FRONT ELEVATION
2
960429A
5 90429A 6
90412A
90415A
3
7 8
4
90411A
960428A
PAGE 39
INKALUM
SHOP FRONT 3" X 1.5" Group VI - 1 (1)
76.20
NO T W P
SECTION mm KG/M mm
90414 0.90 0.464 365.62
38.10
90414A 1.00 0.511 364.90
0.80 SECTION NO:90414TP 0.581
9041AT 1.15 363.82
W=0.417 KG/M
P=366.34 MM 9041TB 1.25 0623 362.79
90414C 1.35 0.666 361.54
76.20
NO T W P
SECTION mm KG/M mm
90428 0.90 0.432 353.79
SECTION NO:90428TP
38.10
W=0.385 KG/M 90428A 1.00 0.479 353.19

0.80
P=354.35 MM
90428AT 1.15 0.549 352.08
90428TB 1.25 0.592 351.08
90428C 1.35 0.635 350.08
76.20
NO T W P
SECTION mm KG/M mm
90429 0.90 0.510 417.15
38.10
90429A 1.00 0.566 416.74

0.80 SECTION NO:90429TP
90429AT 1.15 0.647 415.36
W=0.463 KG/M
P=418.88 MM 1.25 0.698 414.12
90429TB
90429C 1.35 0.749 412.89
PAGE 40
INKALUM
SHOP FRONT 3" X 1.5 " Group VI - 1 (2)

76.20
NO T W P
SECTION mm KG/M mm
960414 0.90 0.520 194.69
38.10
960414A 1.00 0.565 194.69
0.80 SECTION NO:960414TP
960414AT 1.15 0.631 194.69
W=0.470 KG/M
P=393.58 MM 960414TB 1.25 0.671 194.69
960414C 1.35 0.711 194.69
76.20
NO T W P
SECTION mm KG/M mm
960428 0.90 0.489 379.74
38.10
0.80 960428A 1.00 0.534 378.41

SECTION NO:960428TP
W=0.438 KG/M 960428AT 1.15 0.600 376.45
P=381.71 MM 1.25 0.640 374.87
960428TB
960428C 1.35 0.680 373.30
76.20
NO T W P
SECTION mm KG/M mm
960429 0.90 0.567 443.61
38.10
960429A 1.00 0.620 442.04

0.80
SECTION NO:960429TP 960429AT 1.15 0.699 439.74
W=0.514 KG/M 1.25 0.747 437.91
960429TB
P=445.63 MM
960429C 1.35 0.795 436.11
PAGE 41
INKALUM
SHOP FRONT 3" X 1.5" Group VI - 1 (3)
SECTION NO:90411TP
4.00
W=0.156 KG/M
0.80
P=132.17 MM NO T W P
SECTION mm KG/M mm
90411 0.90 0.169 131.97
58.16
90411A 1.00 0.182 131.77
90411AT 1.15 0.202 131.67
90411TB 1.25 0.215 131.27
90411C 1.35 0.227 131.07
NO T W P
17.00
0.80 SECTION mm KG/M mm

90412 0.90 0.247 195.85
90412A 1.00 0.268 194.92

58.16
90412AT 1.15 0.300 194.76
SECTION NO:90412TP
W=0.227 KG/M 90412TB 1.25 0.322 194.32
P=196.78 MM
90412C 1.35 0.343 193.88
31.75
NO T W P
0.80 SECTION mm mm
KG/M
18.85
90415 0.90 0.184 149.84
90415A 1.00 0.203 149.74

SECTION NO:90415TP
90415AT 1.15 0.228 149.16
W=0.166 KG/M
P=150.11 MM 1.25
90415TB 0.246 148.89
90415C 1.35 0.263 148.62
PAGE 42
INKALUM
ASSEMBLY DETAIL : SHOP FRONT 4 INCH Group VI - 2
960558
1
1
GLASS 2 4
6 7 8
GLAZING GASKET
3
GLAZING BLOCK FRONT ELEVATION
2
960559
90559
5 6
90562
90554
3
7 8
4
90561
960560
PAGE 43
INKALUM
101.60
SECTION NO:90558TP
W=0.588 KG/M
44.45
P=462.21 MM
NO T W P
90558 1.00 0.647 461.49
90558AT 1.15 0.737 459.58
90558TB 1.25 0.794 458.50
90558C 1.35 0.850 457.42
101.60
SECTION NO:90559TP
W=0.633 KG/M
P=517.77 MM
44.45
NO T W P
90559 1.00 0.702 517.01
90559AT 1.15 0.803 514.93
90559TB 1.25 0.868 513.70
90559C 1.35 0.933 512.47
101.60
NO T W P
SECTION mm KG/M mm SECTION NO:90560TP
W=0.543 KG/M
44.45
90560 1.00 0.602 443.82

P=444.51 MM
90560AT 1.15 0.689 442.10
0.90
90560TB 1.25 0.744 441.10
90560C 1.35 0.800 440.10
PAGE 44
INKALUM

101.60
44.45
SECTION NO:960558TP
W=0.662 KG/M
P=495.36 MM
0.90 NO T W P
SECTION mm KG/M mm
960558 1.00 0.721 494.63
960558AT 1.15 0.804 491.01
960558TB 1.25 0.858 489.29
960558C 1.35 0.912 487.59
101.60
SECTION NO:960559TP
44.45
W=0.706 KG/M
NO T W P P=550.92 MM
960559 1.00 0.775 550.16
960559AT 1.15 0.871 546.37
960559TB 1.25 0.933 544.49
960559C 1.35 0.995 542.63
101.60
NO T W P
0.90 SECTION mm KG/M mm SECTION NO:960560TP
44.45
1.00 0.694 477.81 W=0.635 KG/M

960560
P=478.50 MM
960560A 1.15 0.757 474.75
960560TB 1.25 0.829 473.45
960560C 1.35 0.881 471.83
PAGE 45
INKALUM
SECTION NO:90561TP
4.22
W=0.222 KG/M
0.90
P=171.26 MM NO T W P
SECTION mm KG/M mm
90561 1.00 0.243 171.46
77.46 90561AT 1.15 0.266 170.76
90561TB 1.25 0.284 170.56
90561C 1.35 0.302 170.36
44.30
NO T W P
21.40

90554 1.00 0.271 196.11
90554AT 1.15 0.306 194.98

SECTION NO:90554ATP
W=0.248 KG/M 90554TB 1.25 0.329 194.40
P=196.80 MM
90554C 1.35 0.351 193.71
NO T W P
19.20
SECTION
0.90
mm KG/M mm
90562 1.00 0.342 244.65
90562AT 1.15 0.378 242.20

77.46 1.25
90562TB 0.405 241.77
90562C 1.35 0.432 241.33

SECTION NO:90562TP
W=0.313 KG/M
P=244.98 MM
17.30
9.00
1.00
SECTION NO:9000
W=0.099 KG/M
P=68.99 MM
PAGE 46
INKALUM
ASSEMBLY DETAIL : SWING DOOR Group VII - 1
960560
3 4
5
92005
1
GLAZING BLOCK
2 FRONT ELEVATION
92003
GLAZING
GASKET
GLASS
92007
92003
92001
2
5
92000
92002
90560 90560
3 92001 92001
PAGE 47
INKALUM
SWING DOOR Group VII - 1 (1)
41.20 44.45
1.15 1.15
69.55
W=1.054 KG/M W=0.882 KG/M
P=420.32 MM P=368.58 MM
NO T W P
SECTION mm KG/M mm
92001A 1.05 0.815 368.90
44.45
NO T W P
SECTION mm KG/M mm
92000A 1.00 0.895 420.92
14.25
1.15
69.55
1.15
17.75
SECTION NO:92002
W=0.845 KG/M
SECTION NO:92003 P=356.82 MM
W=0.173 KG/M
P=110.90 MM
NO T W P
SECTION mm KG/M mm NO T W P
SECTION mm KG/M mm
92003A 1.05 0.154 111.34
92002A 1.05 0.779 357.61
PAGE 48
INKALUM
44.45
1.15
63.35
SECTION NO:92005
W=0.701 KG/M
62.40
P=298.88 MM 1.05
SECTION NO:92006A
W=0.784 KG/M
P=362.77 MM
41.20
NO T W P
SECTION mm KG/M mm
92005A 1.05 0.647 298.28
PAGE 49
INKALUM
1.20
35.00
82.15
SECTION NO:99060
W=0.836 KG/M
P=324.11 MM
1.20
42.10
92.20
SECTION NO:99061
W=0.887 KG/M
P=345.91 MM
1.20
30.20
100.00
SECTION NO:99062
W=1.028 KG/M
P=368.27 MM
PAGE 50
INKALUM
SWING DOOR Group : VII - 1 (4)
34.50
1.10
60.00
SECTION NO:8002
W=0.629 KG/M
P=277.09 MM
34.50
1.10
82.50
SECTION NO:8003
W=0.763 KG/M
P=322.09 MM
1.10
41.00
98.00
SECTION NO:8004
W=0.845 KG/M
P=380.97 MM
PAGE 51
INKALUM
SWING DOOR Group : VII - 1 (5)
34.50
1.10
75.50
SECTION NO:8005
W=0.711 KG/M
P=335.97 MM
32.50
1.10
100.50
SECTION NO:8006
W=0.942 KG/M
P=373.44 MM
PAGE 52
INKALUM
FRAME LESS SECTION Group : VII - 1 (6)
83.00
2.80
38.00
SECTION NO:0109
W=1.681 KG/M
P=434.21 MM
PAGE 53
INKALUM
DOOR HANDLE Group : VII - 1 (7)
38.47 100
SECTION NO:0107
2.4 W=1.008 KG/M
P=312.42 MM
95
1.7 SECTION NO:0162

35
W=0.844 KG/M
P=296.52MM
28.49
1.8
28.64
2.0
5
30.50 34.97
W=0.489 KG/M W=0.495 KG/M
P=165.90 MM P=181.60 MM
PAGE 54
INKALUM
DOOR'S OTHERS Group : VII - 1 (8)
78.00
10.00
0.80
SECTION NO:0116
W=0.395 KG/M
P=189.89 MM
1.10 32.57
40.30
SECTION NO:0118
W=0.383 KG/M
P=242.63 MM
78.00
1.10
40.50
SECTION NO:0115
W=0.893KG/M
P=260.69 MM
PAGE 55
INKALUM
ASSEMBLY DETAIL : SLIDING DOOR Group VII - 2
99102 99105
1
99056
3 4 5 6
1
2
FRONT ELEVATION
GLASS
GLAZING GASKET
GLAZING BLOCK
99058
ROLLER
99103 99106
99104 3 4 5 99054 6 99055
99067
PAGE 56
INKALUM
SLIDING DOOR Group VII - 2 (1)
SECTION NO:99054TP
W=0.438 KG/M
P=252.03MM
38.10
0.90 NO T W P
SECTION mm KG/M mm
99054 0.80 0.391 253.99
38.10
50.80
SECTION NO:99055
W=0.460 KG/M
0.95 P=229.73 MM
NO T W P
28.60
SECTION mm KG/M mm
99055T 0.80 0.389 230.93
99055TP 0.90 0.436 230.13

35.00
W=0.376 KG/M
P=267.22 MM
NO T W P
SECTION mm KG/M mm
99056TP 0.90 0.361 267.92
25.40
SECTION NO:99106
43.20 W=0.269 KG/M
P=160.87 MM
NO T W P
19.00
SECTION mm KG/M mm
0.95
99106TP 0.90 0.261 161.13
PAGE 57
INKALUM
76.20
SECTION NO:99102
W=0.641 KG/M
P=437.06 MM
34.90
NO T W P
SECTION mm KG/M mm
99102TP 0.90 0.617 437.56
0.95
69.85
SECTION NO:99058
W=0.536 KG/M
P=388.57 MM
NO T W P
25.40
SECTION
0.95
mm KG/M mm
99058TP 0.90 0.511 389.27
76.20
SECTION NO:99103
0.95 W=0.542 KG/M
P=320.20 MM
NO T W P
20.00
SECTION mm KG/M mm
99103TP 0.90 0.528 320.87
78.70
NO T W P
22.20
SECTION NO:99104 99104TP 0.90 0.364 297.76

W=0.383 KG/M
P=297.46 MM
PAGE 58
INKALUM
43.20
0.90
26.50
36.50
0.95
35.60
W=0.351 KG/M W=0.254 KG/M
P=256.18 MM P=193.28MM
NO T W P NO T W P
SECTION mm KG/M mm SECTION mm KG/M mm
99105TP 0.90 0.336 256.37 99108TP 0.90 0.241 193.58
0.70
23.80
0.95
27.50
43.20
48.00
SECTION NO:99068
SECTION NO:99055A W=0.236 KG/M
W=0.321 KG/M P=186.10 MM
P=146.50 MM
PAGE 59
INKALUM
ASSEMBLY DETAIL : ROLLING DOOR Group VII - 3
A BOX
1 2 3
OUT IN
4
A TYPICAL ELEVATION
SECTION A-A
1 7104 2 7011 3
7000
SLAT
7000
7107
PAGE 60
INKALUM
ROLLING DOOR Group VII - 3 (1)

55.40
55.30
0.70
0.60
9.00
8.90
SECTION NO:7007
W=0.151 KG/M SECTION NO:7113
P=146.27 MM W=0.169 KG/M
P=146.10 MM
61.00
62.58
0.65
10.50
0.60
8.80
W=0.158 KG/M W=0.136 KG/M
P=166.95 MM P=161.17 MM
62.76 64.02
0.70
10.55
0.80
9.00
SECTION NO:7006B SECTION NO:7004

W=0.175 KG/M W=0.173 KG/M
P=160.88 MM P=172.82 MM
64.02 64.13
0.80
10.55
0.70
10.65
SECTION NO:7002
SECTION NO:7000
W=0.190 KG/M
W=0.191 KG/M
P=172.37 MM
P=169.95 MM
PAGE 61
INKALUM
64.13
0.80
SECTION NO:7001
10.65
W=0.207 KG/M
P=169.69 MM
90.00
15.10
1.00
SECTION NO:7100
W=0.365 KG/M
P=268.12 MM
90.00
15.80
1.00
SECTION NO:7101
W=0.382 KG/M
P=283.47 MM
90.00
15.80
1.00
SECTION NO:7102
W=0.436 KG/M
P=323.03 MM
0.80
SECTION NO:7111
12.00
W=0.291 KG/M
P=269.93 MM
102.50
0.80
SECTION NO:7112
10.60
W=0.299 KG/M
P=274.64 MM
103.50
PAGE 62
INKALUM

41.80
41.50
29.95
24.00
0.90
0.80
SECTION NO:7009 SECTION NO:7009A

W=0.254 KG/M W=0.299 KG/M
P=214.58 MM P=227.01 MM
42.00 43.60
28.10
28.50
1.00
1.10

W=0.329 KG/M W=0.375 KG/M
P=223.55 MM P=232.24 MM
44.00
31.75
1.20
SECTION NO:7105
W=0.466 KG/M
P=289.10 MM
PAGE 63
INKALUM
1.00
0.80
60.00
55.00
W=0.379 KG/M W=0.472 KG/M
P=238.77 MM P=246.59 MM
57.00 57.70
1.00
60.00
SECTION NO:7106
82.00
W=0.471 KG/M
P=242.30 MM
SECTION NO:7108
W=0.612 KG/M
P=318.35 MM
1.30
57.00
63.00
PAGE 64
INKALUM
SECTION NO:7011
1.00
29.00
W=0.888 KG/M
P=514.20 MM
114.00
28.00
W=0.970 KG/M
P=530.82 MM
118.00

31.75
W=1.175 KG/M
P=575.91 MM
115.92
PAGE 65
INKALUM
DOOR JAMB Group VII - 4 (1)
76.20
38.10
SECTION NO:950712
1.00
W=0.517 KG/M
P=364.05 MM
NO T W P
SECTION mm KG/M mm
950713 0.90 0.469 363.42
65
35
0.8
SECTION NO:9009
W=0.401 KG/M
P=347.48 MM
101.60
44.45
SECTION NO:95073
W=0.639 KG/M
P=454.57 MM 1.00
PAGE 66
INKALUM
CURTAIN RAILS Group VIII - 1 (1)
22.00
20.50
13.20
0.80
0.55
10.90
SECTION NO:6005A SECTION NO:6015
W=0.089 KG/M W=0.143 KG/M
P=119.32 MM P=132.11 MM
21.80 20.50
13.00
0.70
12.70
0.60

W=0.125 KG/M W=0.098 KG/M
P=132.91 MM P=121.26 MM
40.50
1.60
SECTION NO:6002
W=0.320 KG/M
19.00
P=124.93 MM
93.50
1.60
24.00
SECTION NO:6003
W=0.692 KG/M
P=251.45 MM
PAGE 67
INKALUM
ASSEMBLY DETAIL : CASEMENT WINDOW Group IX - 1

1
91829
4
91828
2
5 6
7
GLASS
3 FRONT ELEVATION
GLAZING BLOCK
91000
91826
4
GLAZING
GASKET
5 7
PAGE 68
INKALUM
CASEMENT WINDOW Group IX - 1 (1)

W=0.420 KG/M W=0.371 KG/M
P=202.09 MM P=199.45 MM
40.00
1.00
0.90
35.00
35.00
33.50 33.30
18.00
1.00
17.90
0.90

W=0.191 KG/M W=0.170 KG/M
P=138.76 MM P=137.04 MM
SECTION NO:91829
W=0.313 KG/M
P=216.50 MM
31.00
SECTION NO:98130
W=0.216 KG/M
19.00
1.00
1.00
P=147.34 MM
41.00
41.40
NO T W P NO T W P
91862 0.90 0.282 221.57 98130A 0.90 0.200 148.46
PAGE 69
INKALUM
CASEMENT WINDOW Group IX - 1 (2)
35.00
41.00
1.00
37.00
0.80
46.00

W=0.553 KG/M W=0.422 KG/M
P=222.08 MM P=236.56 MM

W=0.168 KG/M W=0.133 KG/M
0.90
P=109.58 MM
0.90
P=139.58 MM
12.70
12.70
50.00 35.00
35.00
25.00
1.00
40.00
0.90
28.50
SECTION NO:91866 SECTION NO:S0029

W=0.448 KG/M W=0.167 KG/M
P=226.43 MM P=123.56 MM
PAGE 70
INKALUM
ASSEMBLY DETAIL : WINDOW WALLS Group IX - 2

1
6
91487R
2 4
7 8
9
91828
3 5
FRONT ELEVATION
4
91828
2
91487R
WEATHER SEAL
91826
GLAZING GASKET
GLASS
3
5
GLAZING BLOCK
PAGE 71
INKALUM
ASSEMBLY DETAIL : WINDOW WALLS Group IX - 2
2 4
7 8
9
FRONT ELEVATION
7 8 9
PAGE 72
INKALUM
WINDOW WALLS Group IX - 2 (1)
48.00
SECTION NO:91847R
0.90 W=0.510 KG/M
P=385.93 MM
70.00
48.00
SECTION NO:91001
W=0.514 KG/M
1.00
P=356.23 MM
70.00
57.70
SECTION NO:91848
0.90
22.20
W=0.267 KG/M
P=190.79 MM
PAGE 73
INKALUM
ASSEMBLY DETAIL : SLIDING WINDOW Group IX - 3
5 5
1 2 3 1 2 4
6 6
FRONT ELEVATION
99066
WEATHER SEAL
99057
5
GLASS
2714 99065
GLAZING
GASKET
RUBBER
STOPPER GLAZING BLOCK
99059
6 ROLLER
4
99064
2715
1 2 3
PAGE 74
INKALUM
SLIDING WINDOW Group IX - 3 (1)
17.98
0.90
25.00
25.00
24.99
0.90 0.90
21.30
28.58
SECTION NO:2714 SECTION NO:2715 SECTION NO:99057

W=0.242 KG/M W=0.289 KG/M W=0.238 KG/M
P=136.22 MM P=179.97 MM P=183.91 MM
17.98
SECTION NO:99066TP
W=0.412 KG/M
P=212.99 MM
15.88 59.08
46.99
24.49
1.20
25.40
0.90
NO T W Fin
SECTION mm KG/M mm
W=0.314 KG/M W=0.182 KG/M
P=244.29 MM P=114.93 MM 99066 1.00 0.477 303.65
59.20
0.90
62.34
35.00
21.49
0.90
SECTION NO:99064TP SECTION NO:99063TP

W=0.304 KG/M W=0.360 KG/M
P=238.81 MM P=161.44MM
NO T W Fin NO T W Fin
99064 1.00 0.332 238.61 99063 1.00 0.384 261.19
PAGE 75
INKALUM
ASSEMBLY DETAIL : CURTAIN WALLS Group X - 1
1 2
95015
1 2
95008
SEALANT GLASS
RUBBER 95013
GASKET
95012
95014
3
BENT TRANSOM
95013
PAGE 76
INKALUM
ASSEMBLY DETAIL : CURTAIN WALLS Group X - 1
95007
5
3
STRUCTURAL SILICON
SEALANT
1 2 3 4
95005
6
SPACER
WEATHER SEAL
7 SILICON SEALANT
FRONT ELEVATION
95017
95006
1 2 7
95005
95001 95018
3 4
95000
PAGE 77
INKALUM
CURTAIN WALLS Group X - 1 (1)
32.00
1.00
21.00
SECTION NO:95351
W=0.278 KG/M
P=206.80 MM
100.00
SECTION NO:95345
W=1.618 KG/M
P=306.00 MM
1.20
SECTION NO:95352
53.00 W=0.689 KG/M
P=191.60 MM
2.00
40.00
50.00
50.00
40.00
1.35
100.00
SECTION NO:953521
W=1.011 KG/M
SECTION NO:95356 P=286.50 MM
W=0.878 KG/M
P=316.40 MM
SECTION NO:99125
36.00 W=0.231 KG/M
P=142.38 MM
1.30
1.20
17.00
40.00
PAGE 78
INKALUM
40.70
1.40
30.50
24.00
1.20
40.70

W=0.310 KG/M W=0.315 KG/M
P=195.18 MM P=205.17 MM
50.80 38.00
1.20
28.00
35.10
1.20

W=0.649 KG/M W=0.463 KG/M
P=264.12 MM P=178.54 MM
38.00
35.10
1.10
30.80
1.00
50.80
SECTION NO:95004 SECTION NO:S0030

W=0.498 KG/M W=0.407 KG/M
P=235.96 MM P=183.69 MM
PAGE 79
INKALUM
38.00 50.80
23.20
1.10
15.90
1.20
1.20
W=0.393 KG/M W=0.515 KG/M
P=136.31 MM P=187.23 MM
56.00
28.00
1.10
1.20
1.20
23.55
50.80

W=0.465 KG/M W=0.335 KG/M
P=195.24 MM P=172.72 MM
100.00
1.80
SECTION NO:95009
W=0.997 KG/M
35.55
P=411.10 MM
PAGE 80
INKALUM

50.00
1.40
6.00
1.60
38.20
60.00
W=0.997 KG/M W=0.515 KG/M
P=301.92 MM P=187.23 MM
1.80
45.40
60.00
6.00
1.60
60.00

W=0.868 KG/M W=0.335 KG/M
P=329.81 MM P=172.72 MM
60.00
7.20
1.40
SECTION NO:95014
W=0.266 KG/M
P=147.63 MM
PAGE 81
INKALUM
100.00
SECTION NO:95015
50.00
W=1.389 KG/M
P=412.62 MM
2.40
40.70
37.20
50.80
46.00
2.00
1.20

W=0.715 KG/M W=0.581 KG/M
P=183.20 MM P=185.94 MM
40.70
30.50
SECTION NO:95018
1.10 W=0.329 KG/M
P=220.73 MM
PAGE 82
INKALUM
TRANSPORT Group XI - 1 (1)

7.00
7.00
7.00
0.60 0.60 0.60
16.50 21.00
21.00
SECTION NO:T9473 SECTION NO:T9474 SECTION NO:T9475

W=0.054 KG/M W=0.062 KG/M W=0.069 KG/M
P=61.65 MM P=70.65 MM P=78.60 MM
PAGE 83
INKALUM
LOUVRES Group XII - 1 (1)
0
0.9
31.75
SECTION NO:7014
W=0.234 KG/M
P=187.06 MM
70.60
101.68
1.60
SECTION NO:7200
21.68
W=0.474 KG/M
P=221.91 MM
1.10
17.90
132.41
SECTION NO:7201
W=0.509 KG/M
P=335.79 MM
NO T W P
SECTION mm KG/M mm
7201 1.10 0.509 335.79
7202 1.00 0.458 336.98
PAGE 84
INKALUM
ASSEMBLY DETAIL : SHOW CASES Group XIII - 1
2 1
3 4
5010
5046A
GLASS
5041
GLAZING BLOCK
ROLLER
5049A
91000
5069 5074
PAGE 85
INKALUM
SHOW CASES Group XIII - 1 (1)
SECTION NO:5024
34.5 W=0.208 KG/M
R8 P=147.44 MM
.5
NO T W P
SECTION mm KG/M mm
23.5
5003 0.70 0.241 146.95
0.60
5002 0.80 0.274 146.47
SECTION NO:5025
W=0.212 KG/M
34.5 P=149.80 MM
R3
NO T W P
SECTION mm KG/M mm
0.60
23.5
5005 0.70 0.246 149.31
5006 0.80 0.279 148.83
R8 R3
.5
22
22
0.6 0.6
22 22

W=0.162 KG/M W=0.166 KG/M
P=119.44 MM P=121.80 MM
NO T W P NO T W P
5007 0.70 0.188 118.95 5008 0.70 0.193 121.31
PAGE 86
INKALUM
R8 R3
.5
29.75
29.75
0.6
0.6
29.75 29.75

W=0.213 KG/M W=0.216 KG/M
P=150.44 MM P=152.80 MM
NO T W P NO T W P
5009 0.70 0.246 149.95 5011 0.70 0.251 152.31
5010 0.80 0.280 149.47 5012 0.80 0.285 151.83
R3
23.5
23.5
0.6
0.6
34.5 34.5
SECTION NO:5036 SECTION NO:5036SK

W=0.197 KG/M W=0.199 KG/M
P=132.25 MM P=133.54 MM
NO T W P NO T W P
5013 0.70 0.229 132.01 5014 0.70 0.231 133.30
PAGE 87
INKALUM
R8 R8
.5 .5
22.9
0.7
28
0.70
22.9 28
W=0.195 KG/M W=0.234 KG/M
P=122.15 MM P=142.95 MM
NO T W P
SECTION mm KG/M mm
5016 0.80 0.221 121.01
R8
.5
29.3
29.3
0.7 0.65
29.3 29.3

W=0.239 KG/M W=0.227 KG/M
P=154.13 MM P=148.39 MM
R8 R8
0.65 0.65
29
28
28 29

W=0.211 KG/M W=0.218 KG/M
P=138.05 MM P=142.05 MM
PAGE 88
INKALUM

R8
.5
0.6
28
0.6
29
28 29
W=0.201 KG/M W=0.208 KG/M
P=143.44 MM P=147.44 MM
R3
R3
0.6
29.75
29.75
0.6
29.75 29.75

W=0.213 KG/M W=0.202 KG/M
P=149.20 MM P=135.25 MM
R8
R8 .5
23.5
22
0.6 0.6
22 34.5

W=0.147 KG/M W=0.193 KG/M
P=100.31 MM P=129.29 MM
PAGE 89
INKALUM
4.3
0.65 0.8
10
12
20 23

W=0.098 KG/M W=0.117 KG/M
P=112.10 MM P=109.80 MM
5
2.6
0.8
11
23.5 15.85 4.95

W=0.127 KG/M W=0.085 KG/M
P=117.51 MM P=51.15 MM
2.6
5.5
3.4
5.5
15.85
16.5

W=0.096 KG/M W=0.121 KG/M
P=53.29 MM P=55.69 MM
PAGE 90
INKALUM
3.4 57
1.2
16
16.5

W=0.128 KG/M W=0.281 KG/M
P=57.17 MM P=174.57 MM
0.75
21.2 22
12.8
9.5
1.2

W=0.171 KG/M W=0.124 KG/M
P=96.72 MM P=109.01 MM
22
0.8
20.5
0.6
9.1
9.5
SECTION NO:5038 SECTION NO:5037A

W=0.087 KG/M W=0.129 KG/M
P=107.61 MM P=107.91 MM
PAGE 91
INKALUM
32.8 36
0.8
0.8
8.9
9
W=0.158 KG/M W=0.172 KG/M
P=147.40 MM P=147.40 MM
1 40
5.2
0.
8
8.9
24
W=0.079 KG/M W=0.235 KG/M
P=75.53 MM P=175.80 MM
NO T W P
SECTION mm KG/M mm
5042 0.80 0.189 176.20
19 20.8
0.9
1.5
4
5

W=0.071 KG/M W=0.114 KG/M
P=58.83 MM P=59.11 MM
PAGE 92
INKALUM
85
20
0.6 SECTION NO:5056
W=0.237 KG/M
P=292.38 MM
89
0.7
21
SECTION NO:5052
W=0.291 KG/M
P=309.48 MM
89
0.7
21
SECTION NO:5053
W=0.307 KG/M
P=325.48 MM
90
21
0.7 SECTION NO:5064

W=0.300 KG/M
P=317.73 MM
PAGE 93
INKALUM
90
21
0.8 SECTION NO:5065
W=0.344 KG/M
P=319.10 MM
90
22.5
0.8 SECTION NO:5067
W=0.353 KG/M
P=327.10 MM
120
0.8
23
SECTION NO:5054
W=0.434 KG/M
P=403.95 MM
134
24
0.8 SECTION NO:5059

W=0.472 KG/M
P=439.42 MM
PAGE 94
INKALUM
134
0.7
24
SECTION NO:5072
W=0.431 KG/M
P=459.01 MM
NO T W P
SECTION mm KG/M mm
5073 0.90 0.552 457.45
5074 1.00 0.613 456.70
120
0.7
23
SECTION NO:5057
W=0.402 KG/M
P=426.99 MM
120
0.8
23
SECTION NO:5055
W=0.448 KG/M
P=416.57 MM
120
0.9
23
SECTION NO:5068
W=0.514 KG/M
P=425.04 MM
PAGE 95
INKALUM
134
23
W=0.455 KG/M
P=451.34 MM
134
0.7
24
SECTION NO:5070
W=0.466 KG/M
P=473.68 MM
134
0.8
24
SECTION NO:5060
W=0.489 KG/M
P=455.42 MM
134
24
0.9 SECTION NO:5071

W=0.515 KG/M
P=426.65 MM
134
24
0.9 SECTION NO:5069

W=0.572 KG/M
P=473.45 MM
PAGE 96
INKALUM
0.6
0.6
11
10
29 24

W=0.126 KG/M W=0.106 KG/M
P=92.00 MM P=78.63 MM
0.6
0.6
22.7
23
31.85 32

W=0.163 KG/M W=0.165 KG/M
P=121.25 MM P=123.77 MM
0.7
19.2
70.5
SECTION NO:0129
W=0.427 KG/M
P=239.47 MM
PAGE 97
INKALUM
TRIMINGS Group XIV - 1 (1)
0
60
0.8
1.0
0.
20.00 20.35 20.35

W=0.130 KG/M W=0.168 KG/M W=0.198 KG/M
P=65.20 MM P=65.77 MM P=65.77 MM
0 70
1.1
5
0.6 0.
20.35 22.00 23.00

W=0.222 KG/M W=0.137 KG/M W=0.147 KG/M
P=68.44 MM P=69.95 MM P=80.86 MM
60 65
0. 0.
0.80
23.00 23.00 23.40

W=0.134 KG/M W=0.116 KG/M W=0.149 KG/M
P=74.17 MM P=74.17 MM P=76.26 MM
PAGE 98
INKALUM
0
0.6
60
0
1.0
0.
23.50 24.00 24.00

W=0.219 KG/M W=0.157 KG/M W=0.158 KG/M
P=74.58 MM P=78.24 MM P=84.32 MM
0
0
0
0.7
0.8
0.7
24.00 24.00 24.00

W=0.159 KG/M W=0.156 KG/M W=0.181 KG/M
P=77.88 MM P=86.34 MM P=87.94 MM
0
80
0.7
7 0 0.
0.
24.20 24.20 24.20

W=0.161 KG/M W=0.180 KG/M W=0.165 KG/M
P=87.14 MM P=87.14 MM P=79.49 MM
PAGE 99
INKALUM
80 70
0
0.8
0. 0.
24.20 24.20 24.30

W=0.190 KG/M W=0.154 KG/M W=0.192 KG/M
P=81.89 MM P=84.62 MM P=94.31 MM
85
0
0.8 80
0.
0.
24.30 24.50 25.10

W=0.196 KG/M W=0.192 KG/M W=0.216 KG/M
P=93.17 MM P=82.74 MM P=87.36 MM
0
0
0.6
90 0
0. 1.
25.40 25.40 25.00

W=0.226 KG/M W=0.245 KG/M W=0.150 KG/M
P=95.21 MM P=95.21 MM P=78.89 MM
PAGE 100
INKALUM
9
0.6
0 0
0.9 1.0
25.00 25.00 25.00

W=0.131 KG/M W=0.227 KG/M W=0.246 KG/M
P=78.66 MM P=83.66 MM P=83.66 MM
0
0.6
00
1. 25
1.
27.50
25.00 25.00
W=0.236 KG/M W=0.292 KG/M W=0.140 KG/M
P=84.22 MM P=83.66 MM P=90.62 MM
00
1.
33.30
SECTION NO:3228
W=0.332 KG/M
P=107.43 MM
PAGE 101
INKALUM
OTHERS Group XV - 1 (1)
1.70
26.00
15.00
2.00
30.00
60.00
SECTION NO:2634R SECTION NO:2661 BR

W=0.397 KG/M W=0.999 KG/M
P=87.08 MM P=168.56 MM
50.00
46.00
1.20
0.60
20.00
24.00
0.60
SECTION NO:2659
SECTION NO:2661KN
W=0.497 KG/M
P=140.00 MM W=0.261 KG/M
P=140.00 MM
1.40
45.00
1.40
60.00
SECTION NO:96751
W=0.812 KG/M
P=299.73 MM
PAGE 102
INKALUM
38.00
1.70
2.00
25.00
SECTION NO:2237G SECTION NO:2238G

W=0.371 KG/M W=0.637 KG/M
P=78.54 MM P=119.38 MM
PAGE 103
INKALUM
A B T W P
SECTION MM MM MM KG/M MM REMARK APLICATION
1046 13.00 - 0.70 0.048 52.00 EQUAL ANGLE

1047 16.00 - 0.70 0.059 64.00 EQUAL ANGLE
1048 20.00 - 0.70 0.075 80.00 EQUAL ANGLE
1049 25.00 - 0.70 0.095 100.00 EQUAL ANGLE
1050 32.00 - 0.70 0.120 128.00 EQUAL ANGLE
1932 8.00 - 0.70 0.037 48.00 STRIPE EQUAL CHANNELS
1934 9.00 - 0.70 0.048 53.00 STRIPE EQUAL CHANNELS
1935 9.00 - 0.70 0.042 52.28 EQUAL CHANNELS
1936 7.00 - 0.70 0.037 40.28 EQUAL CHANNELS
2400 7.00 - 0.70 0.048 28.00 SQUARE HOLLOW
2401 9.00 - 0.70 0.063 26.00 SQUARE HOLLOW
2402 10.00 - 0.70 0.071 40.00 SQUARE HOLLOW
2403 14.00 - 0.70 0.101 56.00 SQUARE HOLLOW

2404 13.00 - 0.70 0.093 52.00 SQUARE HOLLOW
2405 15.00 - 0.70 0.109 59.48 SQUARE HOLLOW
2406 22.50 - 0.70 0.165 90.00 SQUARE HOLLOW
2407 23.00 - 0.70 0.169 92.00 SQUARE HOLLOW

2408 19.00 - 0.70 0.139 76.00 SQUARE HOLLOW
2688 13.00 10.00 0.70 0.074 42.00 RECTANGULAR HOLLOW
PAGE 104

INKALUM

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

INKALUM

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

INKALUM

Uploaded by

Copyright:

Available Formats

PROFILE

PT. INKASA JAYA ALUMINIUM was established in Nov 2013

PT. INKASA JAYA ALUMINIUM is 100% an Indonesian owened company

 8 unit latest aluminium extrusion presses

 3 unit of smelting furnaces

 Anodizing and powder coating finished facilities

 In house die designers,technicians and engineers and also die makers

automobile, precisions engineering, electronics, medical equipments, machineries and etc.

all our customers requirements in this region.

Aluminium Major Advantages :

Extruded shapes – F, T4, T5 and T6

Density 2.71 x 10-6 kg/mmȜ

Melting Range 600-650˚C

Specific Heat between 0-100˚C 879 J/kg deg C

Coefficient of Linear Expansion between 20-200˚C 23x10-6 deg C

Thermal Conductivity at 100˚C 201 W/m deg C

Electrical Resistively at 20˚C 0.033µAm

Modulus of Elasticity 69x10з MPa

Note : Composition in percent maximum unless shown as a range.

Minimum Yield Minimum Elongation’s in 50mm

FLAT BARS Group : I - 1 (1)

1320 42.60 4.00 0.462 93.37 CENTER LINE

1321 50.00 3.00 0.407 106.00 -

FLAT BARS Group : I - 1 (2)

1346 100.00 12.00 3.252 224.00 -

SQUARE BARS Group I - 2 (1)

SECTION NO:0101 SECTION NO:1371

ROUND BARS Group I - 3 (1)

ROUND BARS Group I - 3 (2)

HEXAGON Group I - 4 (1)

SECTION NO:4007 SECTION NO:4008

SECTION NO:4010 SECTION NO:4009

1008 12.00 0.70 0.044 47.85 VEE GROOVE

1009 12.00 0.70 0.044 48.00 -

UNEQUAL ANGLES Group : II - 2 (1)

1202A 16.00 14.00 1.50 0.115 60.00 -

1215A 27.40 24.80 1.20 0.166 104.22 VEE GROOVE

UNEQUAL ANGLES Group : II - 2 (2)

1219 29.00 15.00 1.70 0.195 88.00 -

EQUAL CHANNELS Group : III - 1 (1)

1931 9.00 0.60 0.042 52.28 -

1902 9.50 0.90 0.065 55.20 -

1903 12.50 0.90 0.087 73.20 -

UNEQUAL CHANNELS Group : III - 2 (1)

SQUARE HOLLOWS Group : IV - 1 (1)

SQUARE HOLLOWS Group : IV - 1 (2)

SQUARE HOLLOWS Group : IV - 1 (3)

SQUARE HOLLOWS Group : IV - 1 (4)

SQUARE HOLLOWS Group : IV - 1 (5)

SQUARE HOLLOWS (OTHER) Group : IV - 1 (6)

RECTANGULAR HOLLOWS Group : IV - 2 (1)

RECTANGULAR HOLLOWS Group : IV - 2 (2)

RECTANGULAR HOLLOWS Group : IV - 2 (3)

RECTANGULAR HOLLOWS Group : IV - 2 (4)

RECTANGULAR HOLLOWS (OTHERS) Group : IV - 2 (5)

ROUND TUBE Group : IV - 3 (1)

ROUND TUBE Group : IV - 3 (2)

ROUND TUBE Group : IV - 3 (3)

ROUND TUBE Group : IV - 3 (4)