0% found this document useful (0 votes)
25 views2 pages

2

The document contains log messages from system startup that detail the initialization and registration of various drivers and hardware components, including the thermal governor, clocksource, networking protocols, MTD partitions on NAND flash, and the discovery and initialization of multiple cores on the Broadcom chip including Gigabit Ethernet MACs, USB, and SDIO controllers.

Uploaded by

acclaim1464
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
25 views2 pages

2

The document contains log messages from system startup that detail the initialization and registration of various drivers and hardware components, including the thermal governor, clocksource, networking protocols, MTD partitions on NAND flash, and the discovery and initialization of multiple cores on the Broadcom chip including Gigabit Ethernet MACs, USB, and SDIO controllers.

Uploaded by

acclaim1464
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

[ 1.

047055] thermal_sys: Registered thermal governor 'step_wise'


[ 1.064298] clocksource: Switched to clocksource arm_global_timer
[ 1.065649] NET: Registered PF_INET protocol family
[ 1.065858] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 1.066625] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144
bytes, linear)
[ 1.066685] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ 1.066707] TCP established hash table entries: 1024 (order: 0, 4096 bytes,
linear)
[ 1.066731] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 1.066760] TCP: Hash tables configured (established 1024 bind 1024)
[ 1.066910] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.066967] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.067285] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.067344] PCI: CLS 0 bytes, default 64
[ 1.070328] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 1.074914] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.074946] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY)
(c) 2001-2006 Red Hat, Inc.
[ 1.077322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.080054] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.082112] printk: console [ttyS0] disabled
[ 1.082207] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud =
6250000) is a 16550
[ 1.565900] printk: console [ttyS0] enabled
[ 1.571972] bcm2835-rng 18004000.rng: hwrng registered
[ 2.074269] random: crng init done
[ 2.079852] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 2.086300] nand: AMD/Spansion S34ML01G2
[ 2.090204] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size:
64
[ 2.097784] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB
blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
[ 2.108644] Scanning device for bad blocks
[ 4.032081] 3 bcm47xxpart partitions found on MTD device brcmnand.0
[ 4.038366] Creating 3 MTD partitions on "brcmnand.0":
[ 4.043491] 0x000000000000-0x000000080000 : "boot"
[ 4.049247] 0x000000080000-0x000000200000 : "nvram"
[ 4.056149] 0x000000200000-0x000008000000 : "firmware"
[ 4.063649] 2 trx partitions found on MTD device firmware
[ 4.069119] Creating 2 MTD partitions on "firmware":
[ 4.074070] 0x00000000001c-0x000000400000 : "linux"
[ 4.078956] mtd: partition "linux" doesn't start on an erase/write block
boundary -- force read-only
[ 4.089608] 0x000000400000-0x000007e00000 : "ubi"
[ 4.097866] bcm_iproc 18029200.spi: using bspi-mspi mode
[ 4.109676] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
[ 4.117773] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53011,
rev 5
[ 4.132274] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 4.138687] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0x00
and package 0x02
[ 4.147661] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf
0x4BF, id 0x800, rev 0x2A, class 0x0)
[ 4.158255] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf
0x4BF, id 0x50B, rev 0x01, class 0x0)
[ 4.169005] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id
0x502, rev 0x01, class 0x0)
[ 4.179008] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf
0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 4.189431] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf
0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 4.199845] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf
0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 4.210289] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf
0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 4.220630] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf
0x4BF, id 0x501, rev 0x01, class 0x0)
[ 4.231151] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf
0x4BF, id 0x501, rev 0x01, class 0x0)
[ 4.241699] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf
0x4BF, id 0x501, rev 0x01, class 0x0)
[ 4.252284] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core
(ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
[ 4.264313] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf
0x4BF, id 0x504, rev 0x01, class 0x0)
[ 4.274710] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf
0x4BF, id 0x505, rev 0x01, class 0x0)
[ 4.285118] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF,
id 0x503, rev 0x01, class 0x0)
[ 4.295345] bcma-host-soc 18000000.axi: bus0: Core 14 found: ARM Cortex A9 JTAG
(manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[ 4.306685] bcma-host-soc 18000000.axi: bus0: Core 15 found: Denali DDR2/DDR3
memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[ 4.319415] bcma-host-soc 18000000.axi: bus0: Core 16 found: ROM (manuf 0x4BF,
id 0x508, rev 0x01, class 0x0)
[ 4.329489] bcma-host-soc 18000000.axi: bus0: Core 17 found: NAND flash
controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[ 4.341111] bcma-host-soc 18000000.axi: bus0: Core 18 found: SPI flash
controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[ 4.355135] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[ 4.361951] Can not parse mac address:
[ 4.370088] can not parse nvram name (null)boardnum(null) with value got -22

You might also like