C4 RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller

Mechanical Structures and Installations

RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller Output White LED -
LED indicator
Model No.: C4(150-500mA) / C4(350-1200mA) Output Blue LED -
Match key
Output Green LED -
4 Channels/Multiple current/Push Dim/Wireless remote control/Auto-transmitting/Synchronize DIP switch for current select

CW
Installation rack

1 2 3

1 2 3
ON

CW
Push switch
+
Output Red LED -

-
Push switch common
Output LED +

ON
1 2
DIP switch for light type select
Power Input +

Power Input -
175mm

LVD RED 45mm

Features 27mm
● Set as single color, dual color, RGB or RGBW controller by DIP switch.
160mm
● DC to DC constant current output, multiple output current settings.
● Match with RF 2.4G single zone or multiple zone single color, dual color and RGB/RGBW remote control. LED Current Selection
ON

● One RF controller accept up to 10 remote control. Note: Please select the correct current through the DIP switch on the PCB board when the power is off. 1 2 3

● 4096 levels 0-100% dimming smoothly without any flash.

DIP Switch
● When using with RGB/RGBW light, built in 10 dynamic mode, include jump or gradual change style. Output Current 150mA 200mA 250mA 300mA 350mA 400mA 450mA 500mA
C4
● Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. (150-500mA) Output Voltage 3-45V 3-45V 3-45V 3-45V 3-45V 3-45V 3-45V 3-45V ON OFF

Output Power/CH 0.45-6.75W 0.6-9W 0.75-11.25W 0.9-13.5W 1.05-15.75W 1.2-18W 1.35-20.25W 1.5-22.5W
● Synchronize on multiple number of controllers.
● Fade in and out effect selectable. DIP Switch
Output Current 350mA 500mA 600mA 700mA 800mA 900mA 1050mA 1200mA
● Connect with external push switch to achieve on/off and 0-100% dimming function. C4 Output Voltage 3-45V 3-45V 3-45V 3-45V 3-45V 3-45V 3-45V 3-45V ON OFF
(350-1200mA)
Output Power/CH 1.05-15.75W 1.5-22.5W 1.8-27W 2.1-31.5W 2.4-36W 2.7-40.5W 3.15-47.25W 3.6-54W

Technical Parameters
Wiring Diagram
Input and Output Dimming data
● C4 for RGBW
Input voltage 12-48VDC Input signal RF 2.4GHz + Push Dim
Push Switch

CW
Output voltage 4 x (3-45)VDC Control distance 30m(Barrier-free space)

1 2 3

1 2 3
ON

CW
+

Output current 4CH,150-500mA or 350-1200mA/CH Dimming gray scale 4096 (2^12) levels

-
Drives 1-13pcs LED per channel x 4CH

ON
1 2
1 2
4 x (0.45-22.5)W (150-500mA) Dimming range 0 - 100%
Output power
4 x (1.05-54)W (350-1200mA) Dimming cur ve Logarithmic
Power Supply
Output type Constant current 12-48VDC
Safety and EMC Constant Voltage
RGBW remote AC100-240V
Environment EMC standard (EMC)
ETSI EN 301 489-1 V2.2.3
O O
ETSI EN 301 489-17 V3.2.4
Operation temperature Ta: -30 C ~ +55 C
Safety standard(LVD) EN 62368-1:2020+A11:2020 ● C4 for RGB
Case temperature (Max.) O
T c: +85 C Push Switch
Radio Equipment(RED)

CW
ETSI EN 300 328 V2.2.2

1 2 3
IP rating

1 2 3
IP20

ON

CW
Certification CE,EMC,LVD,RED +

-
Drives 1-13pcs LED per channel x 3CH

ON
1 2
Warranty and Protection 1 2

Weight
Warranty 5 years
Net weight 0 . 120k g Power Supply
Reverse Polarity 12-48VDC
Protection Gross weight 0 . 140k g
Short circuit Constant Voltage
RGB remote AC100-240V

User Manual Ver 2.0.1 Page 1

 C4 RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller

● C4 for dual color

Match Remote Control (two match ways)
Push Switch

CW
End user can choose the suitable match/delete ways. Two options are offered for selection:

1 2 3

1 2 3
ON

CW
+

Use the controller’s Match key Use Power Restart

-
Drives 1-13pcs LED per channel x 4CH

ON
1 2
1 2
Match: Match:
Short press match key, immediately press on/off Switch off the power, then switch on power, repeat again.
Power Supply key (single zone remote) or zone key (multiple zone Immediately short press on/off key (single zone remote)
12-48VDC remote) on the remote. or zone key (multiple zone remote) 3 times on the remote.
Constant Voltage
CCT remote AC100-240V
The LED indicator fast flash a few times The light blinks 3 times means match is successful.
means match is successful.
Delete:
● C4 for single color Delete: .
Switch off the power, then switch on power, repeat again.
Press and hold match key for 5s to delete all match, Immediately short press on/off key (single zone remote)
Push Switch The LED indicator fast flash a few times or zone key (multiple zone remote) 5 times on the remote.

CW
1 2 3

1 2 3
ON

means all matched remotes were deleted. The light blinks 5 times means all matched remotes were

CW
+

deleted.
-

Drives 1-13pcs LED per channel x 4CH

ON
1 2

1 2

RGB/RGBW dynamic mode list

Power Supply No. Name No. Name
12-48VDC
Constant Voltage 1 RGB jump 6 RGB fade in and out
Dimming remote AC100-240V
2 RGB smooth 7 Red fade in and out

Note: 3 6 color jump 8 Green fade in and out

1. The LED quantity at each channel can be different, the controller could auto check and output a proper voltage to each channel 4 6 color smooth 9 Blue fade in and out
according to its LED quantities.
2. The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs. 5 Yellow cyan purple smooth 10 White fade in and out

Push Dim Dual color control

CH1,CH3=Warm white LED
Click ON/OFF CH2,CH4=Cool white LED
Single color Double Click Turn on at 100% or 10%(night light) and vice-versa Each channel can supply up to 10W(@350mA, 30V) and white balance can be controlled as such:
Long press(>1s) from OFF Dimming UP/DOWN Color temperature Cool white Neutral white Warm white
Long press(>1s) from ON Dimming UP/DOWN
CH1=0W,CH2=10W CH1=5W,CH2=5W CH1=10W,CH2=0W
Power distribution CH3=0W,CH4=10W CH3=5W,CH4=5W CH3=10W,CH4=0W
Click ON/OFF
Double Click Turn on at 100% or 10%(night light) and vice-versa Linear dual color tuning Dimming curve for CCT Dimming curve for RGBW/RGB/DIM
Dual Color
Long press(>1s) from OFF Color temperature UP/DOWN (turn off and turn on to return dimming)
100
100 100
Long press(>1s) from ON Dimming UP/DOWN Gamma=1.0 Gamma=1.6
90
90 90

Click ON/OFF 80
80 80

Double Click Change from color mode to white mode(RGB mixed) and vice-versa Warm white(Min. 2700K)
70
70 70

If on color mode change rotation speed;

PWM duty(%)
duty(%)

PWM duty(%)
Long press(>1s) from OFF If on white mode dimming UP/DOWN
60
60 60
RGB
50
50 50
Neutral white(4000K)
If on color mode start/stop color rotation;

PWM
Long press(>1s) from ON If on white mode dimming UP/DOWN
40
40 40

Cool white(Max. 6500K) 30

30 30
Click ON/OFF
20
20 20

Double Click Change between color mode, white mode(W channel) and color+W mode
10
10 10

RGBW If on color mode change rotation speed;

Long press(>1s) from OFF If on white mode or color+W mode, W dimming UP/DOWN 10 20 30 40 50 60 70 80 90 100 10 20 30 40 50 60 70 80 90 100
Recommended CCT range Brightness(%) Brightness(%)
If on color mode start/stop color rotation;
Long press(>1s) from ON If on white mode or color+W mode, W dimming UP/DOWN

Color rotation: Fade in and Fade out Setting

We can select 4 rotation speed: Long press match key 5s, then short press match key 3 times,
10 ash/s means 6 seconds color rotation, 5 ash/s means 30 seconds color rotation, The lighting effect will be set to the fade in and fade out in 3s, the indicator light of LED controller blinks 3 times.
2 ash/s means 1 minute color rotation, 1 ash/s means 6 minutes color rotation. Long press match key 10s, restore factory default parameter, the light on/off time restores to 0.5s.

User Manual Ver 2.0.1 Page 2