Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Spesifikasi Flow Meter

    Uploaded by

    MUH ILHAM MARZUKI
    The document describes four flow meters used for measuring wastewater. The flow meters are manufactured by Siemens-Milltronics and are models MAG 5100W Magflo Meter. They have a measuring range of 0 to 10 m/s and nominal pipe sizes ranging from 1 inch to 78 inches. The flow meters have an accuracy of 0.2% ±2.5 mm/s and can operate at pressures up to 150 psi.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Spesifikasi Flow Meter

    Uploaded by

    MUH ILHAM MARZUKI
    17 views4 pages
    The document describes four flow meters used for measuring wastewater. The flow meters are manufactured by Siemens-Milltronics and are models MAG 5100W Magflo Meter. They have a measuring range of 0 to 10 m/s and nominal pipe sizes ranging from 1 inch to 78 inches. The flow meters have an accuracy of 0.2% ±2.5 mm/s and can operate at pressures up to 150 psi.

    Original Title

    SPESIFIKASI FLOW METER

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes four flow meters used for measuring wastewater. The flow meters are manufactured by Siemens-Milltronics and are models MAG 5100W Magflo Meter. They have a measuring range of 0 to 10 m/s and nominal pipe sizes ranging from 1 inch to 78 inches. The flow meters have an accuracy of 0.2% ±2.5 mm/s and can operate at pressures up to 150 psi.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    17 views4 pages

    Spesifikasi Flow Meter

    Uploaded by

    MUH ILHAM MARZUKI
    The document describes four flow meters used for measuring wastewater. The flow meters are manufactured by Siemens-Milltronics and are models MAG 5100W Magflo Meter. They have a measuring range of 0 to 10 m/s and nominal pipe sizes ranging from 1 inch to 78 inches. The flow meters have an accuracy of 0.2% ±2.5 mm/s and can operate at pressures up to 150 psi.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

     FLOWMETER SENSOR OUTFALL CONDENSOR

    JUMLAH 1 EA

    Manufactured by: Teledyne ISCO


    Model: ISCO LaserFlow Flow Meter (MCERTS)

    38.01 x 26.21 x 56.7 cm


    Size (HxWxL)
    (14.96 x 10.3 x 22.32 in)
    Weight 8.7 kg (19.2 lbs)
    Conductive Carbon Filled ABS, SST,
    Materials Conductive Kynar,
    Anodized Aluminum, UV-Rated PVC
    Cable Lengths 5, 10, 15, or 23 m
    Enclosure IP68
    CE EN61326; FDA CDRH
    Certifications
    21CFR1040; IEC 60825-1
    Laser Class Class 3R Laser Product
    Temperature Operating: 0 to 60 °C (32 to 140 °F)
    Range Storage: -40 to 60 °C (-40 to 140 °F)
    Input voltage: 8 to 26 VDC
    Power Required
    12VDC Nominal
    ±5% of Reading. (Typical, under normal
    Flow Accuracy
    flow conditions)
    Velocity
    Technology Non-Contact Laser Doppler
    Measurement
    -4.6m/s to 4.6 m/s (-15 ft/s to 15 ft/s)
    Range
    Maximum Depth 3m (10 ft)
    Bi-Directional
    Measurement
    a
    Accuracy ±0.5% of reading ±0.03 m/s (0.1 ft/s)
    Minimum Velocity 0.25 m/s (0.8 ft/s)
    Level
    Technology Non-Contact Ultrasonic
    Measurement 0 to 3 m (0 to 10 ft)
    Range from measurement point
    Accuracy ±0.006 m (0.02 ft) at less than or equal to 1 ft level change;
    @ 22 °C (72 °F) ±0.012 m (0.04 ft) at greater than or equal to 1 ft level change
    Temperature ± 0.0002 x D (m) per degree C
    Coefficient within ± 0.00011 x D (ft) per degree F
    compensated (Where D = Distance from transducer to
    range liquid surface)
    Beam Angle 10° (5° from center line)
    Ultrasonic Signal 50KHz
    Optional Secondary Measurement:
    TIENet™ 350 AV Sensor
    Probe Size 19 x 33 x 152 mm
    (HxWxL) (0.75 x 1.3 x 6.0 in)
    Sensor: Epoxy, chlorinated CPVC, SST
    Materials
    Cable: UV-Rated PVC
    Certifications CE EN61326
    Temperature
    0 to 70 °C (32 to 158 °F)
    Range
    Velocity
    Submerged Continuous Wave Doppler
    Technology
    Ultrasonic
    Measurement
    -1.5 to 6.1 m/s (-5 to 20 ft/s)
    Range
    Velocity
    Bi-Directional
    Measurement
    ±0.03 m/s (±0.1 ft/s) from -5 to 5 ft/s
    Accuracy ±2% of reading from 5 to 20 ft/s,
    Uniform velocity profile
    Minimum Depth 25 mm (0.08 ft)
    Frequency 500 kHz
    Level
    Submerged Differential Linear Pressure
    Technology
    Transducer
    Measurement
    0.01 to 3.05 m (0.033 to 10 ft)
    Range
    ± 0.01%FS
    Accuracy
    b
    Maximum
    10.5 m (34 ft)
    Depth
    Stability ±0.007 m/yr (±0.023 ft/yr)
    a. Turbidity > 20 NTU; Distance from liquid surface to bottom of sensor < 48 inches.
    b Maximum non-linearity, hysteresis, & temperature error from
    actual liquid level.
     FLOW METER (KHUSUS LIMBAH), LOKASI NET POND (INLET 2” OUTLET 1.5”)
     FLOW METER (KHUSUS LIMBAH), LOKASI CLARIFIER ASH YARD (INLET 2” OUTLET 3”)

    JUMLAH 4 EA

    Manufactured by: Siemens-Milltronics


    Model: MAG 5100W Magflo Meter

    Applications

    Water abstraction
    Water treatment
    Water distribution network (leak detection management)
    Custody transfer water meters
    Irrigation
    Waste water treatment
    Filtration plant (e.g. reverse osmosis and ultra filtration)
    Industrial water applications

    Measuring Range 0 to 10 m/s


    Nominal Sizes From DN 25 to DN 2000 (1” to 78”)
    Accuracy 0.2 % ±2.5 mm/s
    Operating Pressure Max. 16 bar (Max. 150 psi)
    Ambient Temperature From -40 to 70 °C (-40 to 158 °F)
    Medium Temperature From -10 to 70 °C (14 to 158 °F)
    EPDM
    Liners NBR hard rubber
    Ebonite hard rubber
    Hastelloy C-276
    Electrodes
    Built-in grounding electrodes
    Carbon steel, with corrosion resistant
    Material
    two-component epoxy coating
    EPDM: WRAS, NSF/ANSI Standard 61,
    DVGW 270,
    Drinking Water Approvals ACS and BelgAqua
    NBR: NSF/ANSI Standard 61, WRAS
    Ebonite: WRAS
    OILM R 49
    Custody Transfer Approvals
    MI-001
    General Approval MCERTS Sira Certificate No. MC080136/00

    You might also like