Scribd
Upload
43 views12 pages

Process Flow

The document summarizes the cotton ginning process and its objectives. The ginning process consists of drying, cleaning, and dusting seed cotton, the actual ginning to separate fibers from seeds, and cleaning the lint cotton. The main purpose is to separate fibers from seeds while minimizing fiber damage and seed crushing. Key objectives are removing fibers from seeds, removing neps and waste, collecting fibers and seeds separately, and preparing cotton for further processing to optimize production and preserve quality.

Uploaded by

lokesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views12 pages

Process Flow

The document summarizes the cotton ginning process and its objectives. The ginning process consists of drying, cleaning, and dusting seed cotton, the actual ginning to separate fibers from seeds, and cleaning the lint cotton. The main purpose is to separate fibers from seeds while minimizing fiber damage and seed crushing. Key objectives are removing fibers from seeds, removing neps and waste, collecting fibers and seeds separately, and preparing cotton for further processing to optimize production and preserve quality.

Uploaded by

lokesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

PROCESS FLOW

Ginning is a multi-stage process that consists of:

 The drying, cleaning and dusting of the seed cotton,


 The actual ginning process and
 The cleaning of the lint cotton

Objects of Cotton Ginning:


The main purpose of ginning process is to separating the seed from the fibres
in such a way that it protects the seed from crushing and cause minimum
Fiber fragmentation. Objectives of cotton ginning process are point out below.

1. To removes the fibre from the seed.


2. To remove the neps and wastage in some extents.
3. To collect the seed and seedless cotton fibre separately.
4. To separate the cotton Fiber from the root position of the seeds.
5. Preservation of cotton quality
6. Optimization of production
7. Preparation of cotton for further processing
SPINNING
Blending & Mixing
BLOWROOM
CARDING
COMBING

Lint
Cotton lint refers to the fibrous coat that covers the cotton seeds
DRAWFRAME
• A enuate the card slivers
• Reduce the Fiber hooks and improve Fiber alignment
• Blend and mix fibres
• Reduce the irregularity of card slivers by doubling.
Autoleveller
The object of an autoleveller is to measure the sliver thickness varia ons and then to
con nuously alter the dra accordingly so that more dra is applied to thick places and less to
thin places with the result that the sliver delivered is less irregular than it otherwise would
have been.

SPEEDFRAME
RINGFRAME
ADVANCE YARN MANUFACTURING

You might also like