Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Chryso Tile Grout

    Uploaded by

    rabinb34
    CHRYSO TILE GROUT is a polymer modified cement-based tile grout powder that is ready to use with just water added. It is suitable for grouting ceramic, glass mosaic, and marble tiles with joint widths between 1mm and 6mm. The grout has a workable time of over 30 minutes, is walkable after 24 hours, and provides water repellency, UV resistance, and non-shrinking properties for tile joints. When mixed with water at a 32-37% ratio by weight, 1kg of the grout will cover an area of 70-100 square feet with 3-5mm wide joints.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Chryso Tile Grout

    Uploaded by

    rabinb34
    21 views2 pages
    CHRYSO TILE GROUT is a polymer modified cement-based tile grout powder that is ready to use with just water added. It is suitable for grouting ceramic, glass mosaic, and marble tiles with joint widths between 1mm and 6mm. The grout has a workable time of over 30 minutes, is walkable after 24 hours, and provides water repellency, UV resistance, and non-shrinking properties for tile joints. When mixed with water at a 32-37% ratio by weight, 1kg of the grout will cover an area of 70-100 square feet with 3-5mm wide joints.

    Original Title

    CHRYSO TILE GROUT

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    CHRYSO TILE GROUT is a polymer modified cement-based tile grout powder that is ready to use with just water added. It is suitable for grouting ceramic, glass mosaic, and marble tiles with joint widths between 1mm and 6mm. The grout has a workable time of over 30 minutes, is walkable after 24 hours, and provides water repellency, UV resistance, and non-shrinking properties for tile joints. When mixed with water at a 32-37% ratio by weight, 1kg of the grout will cover an area of 70-100 square feet with 3-5mm wide joints.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views2 pages

    Chryso Tile Grout

    Uploaded by

    rabinb34
    CHRYSO TILE GROUT is a polymer modified cement-based tile grout powder that is ready to use with just water added. It is suitable for grouting ceramic, glass mosaic, and marble tiles with joint widths between 1mm and 6mm. The grout has a workable time of over 30 minutes, is walkable after 24 hours, and provides water repellency, UV resistance, and non-shrinking properties for tile joints. When mixed with water at a 32-37% ratio by weight, 1kg of the grout will cover an area of 70-100 square feet with 3-5mm wide joints.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    AA/09/2022

    TECHNICAL DATA SHEET

    CHRYSO® TILE GROUT


    Polymer Modified Cement Based Tile Grout

    DESCRIPTION

    CHRYSO TILE GROUT is a ready‐to‐use, single component, cementitious polymer modified tile grout in powder form, for
    grouting wall and floor tiles like ceramic, glazed, vitrified, mosaic, glass mosaic and marble tiles etc. It is specially
    formulated non‐shrinking, non‐toxic grout that stop ingress of water through joint.

    INDICATIVE CHARACTERISTICS Mixing:

    Appearance White, Off white powder For 1 kg of CHRYSO TILE GROUT add about 300‐370 ml of
    water Mix with slow speed drill (250‐300 rpm) to a soft &
    Workable time >30 minutes
    smooth consistency paste. This preparation must be used
    Walkable time 24 hours within an hour.

    Mixing Ratio 32‐37% water by wt of Grout


    Application Method / Tools
    Recommended 1mm to 6mm CHRYSO TILE GROUT is applied by trowel, spatula into the
    Joint width
    joints. Then evenly spread to level and finish. Remove
    Theoretical 1 kg will cover 70 sq. to 100 sq. ft
    area with 3‐5mm joint width residual material with a spatula and clean the surface with
    Coverage
    a sponge and water. Do not press on or into the joints.

    DOMAINS OF APPLICATION ADVANTAGES

     CHRYSO TILE GROUT is used for grouting Ceramic,


     Single component only water to be added.
    Vitrified, Glazed, Mosaic, Glass Mosaic and Marble
    tiles.  Can be used in wet conditions.

     It can be used for external and internal areas.  Avoids cracks formation in the joints and non‐
    shrinking.
    METHOD OF APPLICATION  Excellent water repellency and UV resistance.

    Surface Preparation  High strength & abrasion resistance


    properties.
    Surface of the tile must be cleaned and should be free from
    dirt, clear from excess of tile adhesive. Remove dust with  Nontoxic and eco‐friendly.

    wire brush & by air blower. For exterior grouting  Suitable for joint width of 1mm to 6mm
    application, wet the tiles prior to applying CHRYSO TILE  Easy to clean.
    GROUT

    The information contained in this technical data sheet is given to the best of our knowledge and the results from extensive testing in order to remain as objective as possible. However, it
    cannot, in any case be considered as a warranty involving our liability in case of misuse or any different use of our products from the “Application” paragraph of this technical data sheet.
    Some application tests should be carried out before using the product to ensure that the methods of use and conditions of application of the product are satisfactory. Our technical
    assistance is at the disposal of the users. Consult the latest update of the technical data sheet on our website www.chryso.com

    Corporate Office : CHRYSO India Private Limited. Plot No. D -30/7, TTC Industrial Area, M.I.D.C. Turbhe, Navi Mumbai – 400705. Maharashtra, INDIA.
    Tel : +91 22 27685991/2 Email Id : [email protected]
    AA/09/2022
    TECHNICAL DATA SHEET

    CHRYSO® TILE GROUT


    Polymer Modified Cement Based Tile Grout

    SHELF LIFE & STORAGE


    SAFETY

    12 months from the date of manufacturing when stored in  Wear hand gloves, safety shoes and safety goggles
    un‐ opened, original sealed and dry condition at a while using and handling the product.
    temperature range from +5⁰C to 40⁰C
     In case eyes or mouth are affected wash with plenty
    of clean water and seek medical treatment
    PACKING immediately.

    10x1kg Box
    Before use, refer to the Material Safety Data Sheet.
    PRECAUTIONS
    The MSDS is available on www.chryso.com
     Preferably store in sealed conventional containers,
    protected from extreme weather conditions.
    TO KNOW MORE
     Clean all tools and application equipment with water
    Scan or click on QR Code below
    before it set. Clean immediately after use. Hardened /
    cured material can only be mechanically removed.

    The information contained in this technical data sheet is given to the best of our knowledge and the results from extensive testing in order to remain as objective as possible. However, it
    cannot, in any case be considered as a warranty involving our liability in case of misuse or any different use of our products from the “Application” paragraph of this technical data sheet.
    Some application tests should be carried out before using the product to ensure that the methods of use and conditions of application of the product are satisfactory. Our technical
    assistance is at the disposal of the users. Consult the latest update of the technical data sheet on our website www.chryso.com

    Corporate Office : CHRYSO India Private Limited. Plot No. D -30/7, TTC Industrial Area, M.I.D.C. Turbhe, Navi Mumbai – 400705. Maharashtra, INDIA.
    Tel : +91 22 27685991/2 Email Id : [email protected]

    You might also like