Scribd
Upload
93 views4 pages

3 Hours / 70 Marks: Seat No

This document contains instructions for a 3 hour, 70 mark exam on water supply and sanitary engineering. It is divided into 6 main questions, with students required to answer a certain number of sub-questions under each main question. The document provides guidance on exam rules and the number of marks allocated to each question. It also lists the sub-questions under each main question, which cover topics like water intake structures, water demand, water treatment processes, water distribution systems, sewerage systems, and sanitation components.

Uploaded by

24Vaishnavi Khambayate
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views4 pages

3 Hours / 70 Marks: Seat No

This document contains instructions for a 3 hour, 70 mark exam on water supply and sanitary engineering. It is divided into 6 main questions, with students required to answer a certain number of sub-questions under each main question. The document provides guidance on exam rules and the number of marks allocated to each question. It also lists the sub-questions under each main question, which cover topics like water intake structures, water demand, water treatment processes, water distribution systems, sewerage systems, and sanitation components.

Uploaded by

24Vaishnavi Khambayate
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

12223

22504
3 Hours / 70 Marks Seat No.

Instructions : (1) All Questions are compulsory.

(2) Answer each next main Question on a new page.

(3) Illustrate your answers with neat sketches wherever necessary.

(4) Figures to the right indicate full marks.

(5) Assume suitable data, if necessary.

(6) Use of Non-programmable Electronic Pocket Calculator is permissible.

(7) Mobile Phone, Pager and any other Electronic Communication


devices are not permissible in Examination Hall.

Marks

1. Attempt any FIVE of the following : 10

(a) Define intake structure. Enlist different types of intakes.

(b) Enlist basic categories of water demand.

(c) Enlist different types of valves used in water supply pipeline network.

(d) Define : Self-cleansing velocity and non-scouring velocity.

(e) Define the terms – B.O.D. and C.O.D.

(f) Enlist different types of pipes used for water distribution purpose.

(g) Enlist any four Building sanitary fittings.

[1 of 4] P.T.O.
22504 [2 of 4]
2. Attempt any THREE of the following : 12
(a) Explain the need for analysis of water to check its quality.
(b) The following data shows the variation in population of a town. Estimate the
population of the town in 2031 using geometrical increase method :

Year 1951 1961 1971 1981 1991 2001

Population (Thousands) 82 95 120 154 194 231

(c) State the acceptable limits of drinking water for below listed parameters
according to IS-10500 :
(i) MPN
(ii) Fluoride
(iii) Hardness
(iv) Chlorides
(d) Define : Disinfection and state its objects.

3. Attempt any THREE of the following : 12


(a) Explain reverse osmosis process with neat labelled sketch.
(b) State the principle of coagulation. Explain “Jar Test” with neat labelled
sketch.
(c) Explain “Dead End System” layout of water distribution.
(d) Explain break point chlorination with neat labelled sketch.

4. Attempt any THREE of the following : 12


(a) Draw a neat labelled sketch of clariflocculator.
(b) Draw the neat labelled sketch of “combined system” method of distribution of
water and explain its suitability.
(c) State the factors affecting selection of pipe materials. Mention types of pipe
used specially for conveyance of hot water.
22504 [3 of 4]
(d) State systems of sewerage and explain any one alongwith its advantages and
disadvantages.
(e) State the parameters suggested by Maharashtra Pollution Control Board for
sewage discharge with their limits.

5. Attempt any TWO of the following : 12


(a) Explain the method of water softening and defluoridation technique for
purification of water.
(b) Draw a neat labelled drainage plan for building related to sanitary fittings.
State the principles regarding design of building drainage.
(c) Draw a neat labelled sketch of Drop Manhole. State any three criteria
regarding spacing of manholes.

6. Attempt any TWO of the following : 12


(a) Compare one pipe and two pipe systems of plumbing on any six points.
(b) Draw a neat labelled sketch of oxidation pond (plan & section) and explain its
working.
(c) Draw a neat labelled sketch of septic tank (only c/s section) and state the
functions of components.

_______________

P.T.O.
22504 [4 of 4]

You might also like