ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
: Architecture Assistantship/ Automobile Engineering./ Agricultural Engineering/
Architecture/
Civil Engineering/ Chemical Engineering/ Civil & Rural Engineering/ Construction
Technology/
Fashion & Clothing Technology/ Electrical Engineering/ Electrical Power System/ Food
Programme Name/s
Technology/
Interior Design & Decoration/ Interior Design/ Civil & Environmental Engineering/
Mechanical Engineering/
Mechatronics/ Production Engineering/ Printing Technology/ Polymer Technology/
Textile Technology/ Textile Manufactures
: AA/ AE/ AL/ AT/ CE/ CH/ CR/ CS/ DC/ EE/ EP/ FC/ IX/ IZ/ LE/ ME/ MK/ PG/
Programme Code
PN/ PO/ TC/ TX
Semester : First
Course Title : ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches)
Course Code : 311006
I. RATIONALE
Engineering graphics is the language of engineers. The concepts of graphical language are used in expressing the
ideas, conveying the instructions, which are used in carrying out the jobs on the sites, shop floor etc. This course is
useful in developing drafting and sketching skills in the student. It covers the knowledge & application of drawing
instruments & also familiarizes the learner about Bureau of Indian Standards related to engineering drawing. The
curriculum aims at developing the ability to draw and read various engineering curves, projections and
dimensioning styles. The subject mainly focuses on use of drawing instruments, developing imagination and
translating ideas into sketches. The course also helps to develop the idea of visualizing the actual object or part on
the basis of drawings and blue prints. This preliminary course aims at building a foundation for the further courses
related to engineering drawing and other allied courses in coming semesters
II. INDUSTRY / EMPLOYER EXPECTED OUTCOME
Prepare engineering drawing manually using prevailing drawing instruments.
III. COURSE LEVEL LEARNING OUTCOMES (COS)
Students will be able to achieve & demonstrate the following COs on completion of course based learning
CO1 - Draw geometrical figures and engineering curves.
CO2 - Apply principles of orthographic projections for drawing given pictorial views.
CO3 - Draw isometric views of given component or from orthographic projections.
CO4 - Use various drawing codes, conventions and symbols as per IS SP-46 in engineering drawing.
CO5 - Draw free hand sketches of given engineering elements.
IV. TEACHING-LEARNING & ASSESSMENT SCHEME
MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme
ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Learning Scheme Assessment Scheme
Actual
Based on LL &
Contact Based on
Theory TL
Course Course Hrs./Week SL
Course Title Abbr Credits Paper Total
Code Category/s SLH NLH Practical
Duration Marks
FA- SA-
CL TL LL Total FA-PR SA-PR SLA
TH TH
Max Max Max Min Max Min Max Min Max Min
ENGINEERING
GRAPHICS
311006 (Civil, Electrical, EGR DSC 2 - 4 - 6 3 - - - - 50 20 50@ 20 - - 100
Mechanical and
allied branches)
Total IKS Hrs for Sem. : 2 Hrs
Abbreviations: CL- ClassRoom Learning , TL- Tutorial Learning, LL-Laboratory Learning, SLH-Self Learning
Hours, NLH-Notional Learning Hours, FA - Formative Assessment, SA -Summative assessment, IKS - Indian
Knowledge System, SLA - Self Learning Assessment
Legends: @ Internal Assessment, # External Assessment, *# On Line Examination , @$ Internal Online
Examination
Note :
1. FA-TH represents average of two class tests of 30 marks each conducted during the semester.
2. If candidate is not securing minimum passing marks in FA-PR of any course then the candidate shall be
declared as "Detained" in that semester.
3. If candidate is not securing minimum passing marks in SLA of any course then the candidate shall be
declared as fail and will have to repeat and resubmit SLA work.
4. Notional Learning hours for the semester are (CL+LL+TL+SL)hrs.* 15 Weeks
5. 1 credit is equivalent to 30 Notional hrs.
6. * Self learning hours shall not be reflected in the Time Table.
7. * Self learning includes micro project / assignment / other activities.
V. THEORY LEARNING OUTCOMES AND ALIGNED COURSE CONTENT
Suggested
Theory Learning Outcomes Learning content mapped with Theory Learning
Sr.No Learning
(TLO's)aligned to CO's. Outcomes (TLO's) and CO's.
Pedagogies.
Unit - I Basic Elements of Drawing
TLO 1.1 Prepare drawing
1.1 Drawing Instruments and supporting material:
using drawing instruments.
method to use them with applications.
TLO 1.2 Use IS SP-46 for
1.2 Standard sizes of drawing sheets (ISO-A series)
dimensioning
1.3 I.S. codes for planning and layout.
TLO 1.3 Use different types
1.4 Letters and numbers (single stroke vertical) Model
1 of lines.
1.5 Convention of lines and their applications. Demonstration
TLO 1.4 Draw regular
1.6 Scale - reduced, enlarged & full size
geometrical figures.
1.7 Dimensioning techniques as per SP-46 (Latest
TLO 1.5 Draw figures
edition) – types and applications of chain, parallel and
having tangency
coordinate dimensioning
constructions.
1.8 Geometrical constructions.
MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme
ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Suggested
Theory Learning Outcomes Learning content mapped with Theory Learning
Sr.No Learning
(TLO's)aligned to CO's. Outcomes (TLO's) and CO's.
Pedagogies.
Unit - II Engineering curves & Loci of Points.
2.1 Concept and understanding of focus, directrix, vertex
TLO 2.1 Explain different
and eccentricity. Conic sections.
engineering curves with
2.2 Methods to draw an ellipse by Arcs of circle method
areas of application.
& Concentric circles method.
TLO 2.2 Draw different
2.3 Methods to draw a parabola by Directrix-Focus
conic sections.
method & Rectangle method
TLO 2.3 Draw involute and
2 2.4 Methods to draw a hyperbola by Directrix-Focus Demonstration
cycloidal curves.
method.
TLO 2.4 Draw helix and
2.5 Methods to draw involutes: circle & pentagon
spiral curves from given
2.6 Methods to draw Cycloidal curve: cycloid, epicycloid
data
and hypocycloid
TLO 2.5 Plot Loci of points
2.7 Methods to draw Helix & Archimedean spiral.
from given data.
2.8 Loci of points on Single slider crank mechanism with
given specifications.
TLO 3.1 Explain methods of
Orthographic Projections.
Unit - III Orthographic Projections
TLO 3.2 Draw orthographic
3.1 Introduction of projections-orthographic, perspective,
views of simple 2D entities
isometric and oblique: concept and applications.(No
containing lines, circles and Model
question to be asked in examination)
arcs only. Demonstration
3 3.2 Introduction to orthographic projection, First angle
TLO 3.3 Draw the Video
and Third angle method, their symbols. Conversion of
orthographic views from Demonstrations
pictorial view into Orthographic Views – object
given pictorial views.
containing plain surfaces, slanting surfaces, slots, ribs,
TLO 3.4 Use of IS code IS
cylindrical surfaces. (use First Angle Pr
SP-46 for dimensioning
technique.
TLO 4.1 Prepare isometric Unit - IV Isometric Projections
scale. 4.1 Introduction to Isometric projection.
TLO 4.2 Draw isometric 4.2 Isometric scale and Natural Scale.
views of simple 2D entities 4.3 Isometric view and isometric projection.
Model
containing lines, circles and 4.4 Ilustrative problems related to simple objects having
Demonstration
4 arcs only. plain, slanting, cylindrical surfaces and slots on slanting
Video
TLO 4.3 Interpret the given surfaces.
Demonstrations
orthographic views. 4.5 Conversion of orthographic views into isometric
TLO 4.4 Draw Isometric View/projection. (For branches other than mechanical
views from given Engineering, the teacher should select branch specific
orthographic views elements)
TLO 5.1 Sketch
Unit - V Free Hand Sketches of Engineering Elements
proportionate freehand
5.1 5.1 Free hand sketches of machine elements: Thread
sketches of given machine
profiles, nuts, bolts, studs, set screws, washers, Locking Model
5 elements.
arrangements. (For branches other than mechanical Demonstration
TLO 5.2 Select proper
Engineering, the teacher should select branch specific
fasteners and locking
elements for free hand sketching)
arrangement.
VI. LABORATORY LEARNING OUTCOME AND ALIGNED PRACTICAL / TUTORIAL EXPERIENCES.
MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme
ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Practical / Tutorial /
Sr Laboratory Experiment / Practical Titles / Tutorial Number Relevant
Laboratory Learning
No Titles of hrs. COs
Outcome (LLO)
* Draw horizontal, vertical, 30 degree, 45 degree, 60 &
LLO 1.1 Use of drawing
1 75 degrees lines using Tee and Set squares/ drafter. 2 CO1
instruments
(Sketch Book).
LLO 2.1 Use of IS code
* Draw different types of lines, dimensioning styles
related to dimensioning 2 2 CO1
(Sketch Book)
standard
* Draw one figure showing dimensioning techniques,
LLO 3.1 Practice of drawing
3 two problems on redraw the figures and one problem on 2 CO1
as per given sketch
loci of points - slider crank mechanism. (Sketch Book)
* Draw one figure showing dimensioning techniques,
LLO 4.1 Use IS Standard for
4 two problems on redraw the figures and one problem on 4 CO1
drawing different figures
loci of points - slider crank mechanism. (01 Sheet)
LLO 5.1 Identify different
5 * Draw any four Engineering Curves (Sketchbook) 2 CO1
Engineering curves
LLO 6.1 Identify different
6 * Draw any four Engineering Curves – (01 Sheet) 4 CO1
Engineering curves
LLO 7.1 Apply method of * Draw two problems on orthographic projections using
CO2
projection for drawing simple 7 first angle method of projection having plain surfaces, 2
CO4
orthographic views slanting surfaces and slots etc.- ( Sketchbook)
LLO 8.1 Apply method of Draw two problems on orthographic projections using
CO2
projection for drawing simple 8 first angle method of projection having plain surfaces, 4
CO4
orthographic views slanting surfaces and slots etc.- (01 Sheet)
LLO 9.1 Apply method of Draw two problems on orthographic projections using
CO2
projection for drawing 9 first angle method of projection having cylindrical 2
CO4
complex orthographic views surfaces, ribs etc. (Sketchbook)
LLO 10.1 Apply method of * Draw two problems on orthographic projections using
CO2
projection for drawing 10 first angle method of projection having cylindrical 4
CO4
complex orthographic views surfaces, ribs etc.- (01 Sheet)
* Draw two problems on Isometric view of simple
LLO 11.1 Draw simple CO3
11 objects having plain and slanting surfaces by using 2
isometric projections CO4
natural scale. (Sketchbook)
LLO 12.1 Apply different Draw two problems on Isometric view of simple objects
CO3
scales for drawing isometric 12 having plain and slanting surfaces by using natural scale. 4
CO4
projections. ( 01 sheet)
Draw two problems on Isometric Projection of objects
LLO 13.1 Draw simple CO3
13 having cylindrical surfaces and slots on slanting surfaces 2
isometric projections CO4
by using isometric scale.(Sketchbook)
LLO 14.1 Apply different * Draw two problems on Isometric Projection of objects
CO3
scales for drawing isometric 14 having cylindrical surfaces and slots on slanting surfaces 4
CO4
projections by using isometric scale. ( 01 sheet)
Problem Based Learning: Given the orthographic views
LLO 15.1 Draw
of at least three objects with few missing lines, the CO2
Orthographic views of a 15 2
student will try to imagine the corresponding objects, CO4
given object.
complete the views and draw these views (sketch book).
LLO 16.1 Draw standard
* Draw freehand Sketches of 12 different standard
discipline oriented 16 2 CO5
components (Sketch book)
components using free hand .
MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme
ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Practical / Tutorial /
Sr Laboratory Experiment / Practical Titles / Tutorial Number Relevant
Laboratory Learning
No Titles of hrs. COs
Outcome (LLO)
LLO 17.1 Draw standard
Draw freehand Sketches of 12 different standard
discipline oriented 17 2 CO5
components (1 Sheet)
components using free hand .
CO1
LLO 18.1 Collect
CO2
information of an ancient * Correlate ancient Indian sculptures, Indian temples,
18 2 CO3
Indian culture related to Monuments, etc. with Engineering Graphics
CO4
engineering graphics
CO5
Note : Out of above suggestive LLOs -
'*' Marked Practicals (LLOs) Are mandatory.
Minimum 80% of above list of lab experiment are to be performed.
Judicial mix of LLOs are to be performed to achieve desired outcomes.
VII. SUGGESTED MICRO PROJECT / ASSIGNMENT/ ACTIVITIES FOR SPECIFIC LEARNING /
SKILLS DEVELOPMENT (SELF LEARNING)
not Applicable
VIII. LABORATORY EQUIPMENT / INSTRUMENTS / TOOLS / SOFTWARE REQUIRED
Relevant LLO
Sr.No Equipment Name with Broad Specifications
Number
1 Drawing Table with Drawing Board of Full Imperial/ A1 size. All
2 Models of objects for orthographic / isometric projections 7,8,9,10,11,12,13,14,15
3 Models/ Charts of objects mentioned in unit no. 5 16,17
4 Set of various industrial drawings being used by industries. All
Set of drawings sheets mentioned in section 6.0 could be developed by
5 experienced teachers and made used available on the MSBTE portal to be used as All
reference/standards.
Drawing equipment and instruments for class room teaching-large size: a. T-square
or drafter (Drafting Machine). b. Set squires (450 and 300-600) c. Protector. d.
6 All
Drawing instrument box (containing set of compasses and dividers). Drawing
sheets, Drawing pencils, Eraser, Drawing pins / clips
IX. SUGGESTED WEIGHTAGE TO LEARNING EFFORTS & ASSESSMENT PURPOSE (Specification
Table)
Aligned Learning R- U- A- Total
Sr.No Unit Unit Title
COs Hours Level Level Level Marks
1 I Basic Elements of Drawing CO1 3 0 0 6 6
2 II Engineering curves & Loci of Points. CO1 6 0 0 6 6
3 III Orthographic Projections CO2,CO4 7 0 0 14 14
MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme
ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Aligned Learning R- U- A- Total
Sr.No Unit Unit Title
COs Hours Level Level Level Marks
4 IV Isometric Projections CO3,CO4 8 0 0 14 14
Free Hand Sketches of Engineering
5 V CO4,CO5 6 0 0 10 10
Elements
Grand Total 30 0 0 50 50
X. ASSESSMENT METHODOLOGIES/TOOLS
Formative assessment (Assessment for Learning)
Term work
Summative Assessment (Assessment of Learning)
Practical
XI. SUGGESTED COS - POS MATRIX FORM
Programme
Specific
Programme Outcomes (POs)
Outcomes*
(PSOs)
Course PO-5
Outcomes PO-1 Basic Engineering
(COs) PO-3 PO-7
and PO-2 PO-4 Practices for
Design/ PO-6 Project Life PSO- PSO- PSO-
Discipline Problem Engineering Society,
Development Management Long 1 2 3
Specific Analysis Tools Sustainability
of Solutions Learning
Knowledge and
Environment
CO1 3 - - 2 - 2 -
CO2 3 - - 2 - 2 -
CO3 3 - - 2 - 2 -
CO4 3 - - 2 - 2 -
CO5 3 - - 2 - 2 -
Legends :- High:03, Medium:02,Low:01, No Mapping: -
*PSOs are to be formulated at institute level
XII. SUGGESTED LEARNING MATERIALS / BOOKS
Sr.No Author Title Publisher with ISBN Number
Bureau of Indian Engineering Drawing Practice for Third Reprint, October 1998 ISBN No. 81-
1
Standards. Schools and Colleges IS: SP-46 7061-091-2
Charotar Publishing House, 2010 ISBN No.
2 Bhatt, N.D. Engineering Drawing
978-93-80358-17-8
Bhatt, N.D.; Charotar Publishing House, 2010 ISBN No.
3 Machine Drawing
Panchal, V. M 978-93-80358-11-6
MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme
ENGINEERING GRAPHICS (Civil, Electrical, Mechanical and allied branches) Course Code : 311006
Sr.No Author Title Publisher with ISBN Number
Tata McGraw Hill Edu. New Delhi, 2010,
4 Jolhe, D.A. Engineering Drawing
ISBN No. 978-0-07-064837-1
S. Chand and Company New Delhi, ISBN
5 Dhawan, R. K. Engineering Drawing
No. 81-219-1431-0
Pradhan, S.K Jain, Khanna Book Publishing CO(P) LTD, New
6 Engineering Graphics
K.K Delhi, ISBN No. 978-93-91505-50-9
XIII . LEARNING WEBSITES & PORTALS
Sr.No Link / Portal Description
1 https://www.youtube.com/watch?v=dmt6_n7Sgcg Free Hand Sketches
2 https://www.youtube.com/watch?v=_MQScnLXL0M Orthographic Projection
3 https://www.youtube.com/watch?v=3WXPanCq9LI Basics of Projection
4 https://www.youtube.com/watch?v=fvjk7PlxAuo Introduction to Engineering Graphics
5 https://www.youtube.com/watch?v=8j7l1OWhMlE Isometric Projection
MSBTE Approval Dt. 09/08/2023 Semester - 1, K Scheme
