xc e ll e n c e

fE
n9 0 Years o
More tha

Introduction
Deno Compressors B.V. is a manufacturer
f t off air
i The
Th price
i level
l l off spare parts
t compares excellently
ll tl
compressors and a specialist in the field of marine with other manufacturers.
applications for compressed air systems.
Deno starting air compressors have type approval
Deno Compressors have been designed and of major classification societies. Inspection
constructed since 1919 and thousands of certificates for individual compressors are issued
compressor systems have been installed since upon request.
then.
Deno Compressors systems can be delivered
An adequate stock of all components maintained custom made as a package creating an opportunity
for all types, at all times. for saving space, time and installation costs.

Deno delivery program

Piston type starting air compressors Turn key compressor modules
Air- or water-cooled with a working pressure up to Skid built units, completely prepared for quick
40 bar and capacities up to 410 Nm3/hr. installation and start up. Standard units, as well
as custom built units available.
Screw type compressors
Air- or water-cooled, belt or direct driven with a Nitrogen Generators
working pressure up to 13 bar and capacities up to Capacity from 100Nm3/hr. up to 1600 Nm3/hr.
3900
3
39 Nm³/hr. Purity 95% and 98%.

Emergency
Em Starting air compressors Deno air auxiliaries:
Beeld? Diesel
Di and manually driven starting air • Control cabinets
compressors
co • Air receivers
• Air reducer panels
Breathing
Br air compressors • Dryers
Portable
Po and stationed units, air quality according • Filters
DIN
DI 3188, and according requirements of SOLAS. • Drain and separator systems

2 Deno Compressors
Deno CCompressors
 Deno Emergency
starting air compressors
Emergency
ergency starting air compressors • Completely independent starting air system
• Max pressure
p 40bar
• Capacity is free air delivery at 30bar (F.A.D.)
Deno compressors has developed a range of emergency starting
• Max ambient temperature 55ºC
air compressors that can provide starting air upto 40bar
• Manually or battery started
without the use of any electrical power source.
• Optionally; Fully automatic start / stop
This range contains a manually operated starting air
compressor which is optionally delivered ontop of a 30ltr air
receiver and a series of diesel driven starting compressors.

Technical Data
Capacity F.A.D. Air receiver
Model Qty Drive with 60 strokes per minute Volume Pressure Lenght Width Height Weight
Cyl. / Stage type Nm³/hr Ltr/min Ltr Bar mm mm mm kg
T8 2/2 Manual 1,8 30 Without 500 200 1200 25
T8-30 2/2 Manual 1,8 30 30 30 800 300 1650 65

1450r pm 1750 rpm

Model Qty Diesel motor Capacity F.A.D. Motor power Capacity F.A.D. Motor power Lenght Width Height Weight
Cyl. / Stage Brand / Type Nm³/hr Kw Nm³/hr Kw mm mm mm kg
L2-15HD 2/2 Hatz / 1D81 15 5,5 18 6,6 1200 575 870 325
L2-20HD 2/2 Hatz / 1D81 20 5,5 24 6,6 1200 575 870 330
L2-25HD 2/2 Hatz / 1D81 25 5,5 30 6,6 1200 575 870 335
L2-35HD 2/2 Hatz / 2M41 35 14,8 42 17,8 1450 675 950 550
L2-55HD 2/2 Hatz / 2M41 55 14,8 66 17,8 1750 675 950 975
Rated details at 30bar. Nominal conditions, 20oC, 1013mbar

Deno Compressors 3
 Deno air-cooled
starting air compressors
• Max pressure
ressure 40bar
• Capacity
ity is free air de
delivery
elivery at 30bar (F.A.D.)
Air-Cooled 50 Hz
• Max ambient temperatureture 55ºC
The DENO L2 & L4 series are 2 stage
stage, direct driven
driven, pisto
piston type
• Standard voltage 380~415V / 3Ph / 50Hz
starting air compressors.
• Non standard voltages and pressure upon request
The compressors can be delivered as loose units as well as
completely assembled starting air skids for easy installation
and direct start-up. The compressors operation is fully automatic
and complies to the rules and regulations of all major
classification societies.

Technical Data
950 rpm 1450 rpm
Model Qty Stroke Bore LP/HP Capacity F.A.D. Req. power Capacity F.A.D. Req. power Lenght Width Height Weight
Cyl. / Stage mm mm Nm³/hr Kw Nm³/hr Kw mm mm mm kg
L2-15 2/2 40 90/45 10 1,9 15 3 950 580 620 190
L2-20 2/2 42 100/45 13 2,5 20 4 960 580 630 195
L2-25 2/2 52 100/45 16 3,3 25 5,3 960 580 630 195
L2-28 2/2 60 100/45 18 4,0 28 6,2 960 580 630 210
L2-30 2/2 52 110/50 20 4,3 30 6,5 960 580 630 215
L2-35 2/2 60 110/50 23 4,9 35 7,3 960 580 630 215
L2-55 2/2 70 130/60 36 7,0 55 10,7 1690 950 775 695
L2-75 2/2 70 150/68 49 9,5 75 14,5 1690 950 775 710
L2-85 2/2 80 150/68 56 10,8 85 16,5 1775 950 775 735
L4-110 4/2 70 130/60 72 14,0 110 21,3 2260 1005 915 1070
L4-155 4/2 70 150/68 102 19,7 155 30,0 2260 1005 915 1140
L4-170 4/2 80 150/68 111 21,6 170 32,9 2325 1005 915 1215
Rated details at 30bar. Nominal conditions, 20oC, 1013mbar

4 Deno Compressors
Deno air-cooled
starting air compressors
Air-Cooled
Air-Coole
ed 60 Hz • Max pressure 40bar
• Capacity is free air delivery at 330bar (F.A.D.)
• Max ambient temperature 55ºC
The DENO L2 & L4 series are 2 stage, direct driven, piston type
• Standard voltage 440~460V / 3Ph / 60Hz
starting air compressors.
• Non standard voltages and pressure upon request
The compressors can be delivered as loose units as well as
completely assembled starting air skids for easy installation
and direct start-up. The compressors operation is fully automatic
and complies to the rules and regulations of all major
classification societies.

Technical Data
1150 rpm 1750 rpm
Model Qty Stroke Bore LP/HP Capacity F.A.D. Req. power Capacity F.A.D. Req. power Lenght Width Height Weight
Cyl. / Stage mm mm Nm³/hr Kw Nm³/hr Kw mm mm mm kg
L2-15 2/2 40 90/45 12 2,4 18 3,6 950 580 620 190
L2-20 2/2 42 100/45 16 3,2 24 4,8 960 580 630 195
L2-25 2/2 52 100/45 20 4,2 30 6,4 960 580 630 195
L2-28 2/2 60 100/45 22 4,9 35 7,5 960 580 630 210
L2-30 2/2 52 110/50 24 5,2 36 7,8 960 580 630 215
L2-35 2/2 60 110/50 28 5,9 42 8,7 960 580 630 215
L2-55 2/2 70 130/60 44 8,5 66 12,9 1690 950 775 695
L2-75 2/2 70 150/68 59 11,5 91 17,5 1690 950 775 710
L2-85 2/2 80 150/68 67 13,1 103 19,9 1775 950 775 735
L4-110 4/2 70 130/60 87 16,9 133 25,7 2260 1005 915 1070
L4-155 4/2 70 150/68 123 23,8 187 36,3 2260 1005 915 1140
L4-170 4/2 80 150/68 135 26,1 205 39,8 2325 1005 915 1215
Rated details at 30bar. Nominal conditions, 20oC, 1013mbar

Deno Compressors 5
 Deno water-cooled
starting air compressors
• Max pressure
re 40bar
• Capacity is free air delivery at 30bar (F.A.D.)
Water-Cooled 50 Hz
• Max ambient temperature 55ºC
The DENO 2K & 4K series are 2 stage, direct driven, piston
• Suitable for fresh & sea water cooling, max 40ºC
type starting air compressors.
• Standard voltage 380~415V / 3Ph / 50Hz
The compressors can be delivered as loose units as well as
• Non standard voltages and pressure upon request
completely assembled starting air skids for easy installation
and direct start-up. The compressors operation is fully
automatic and complies to the rules and regulations of all
major classification societies.

Technical Data
950 rpm 1450 rpm
Model Qty Stroke Bore LP/HP Capacity F.A.D. Req. power Capacity F.A.D. Req. power Lenght Width Height Weight
Cyl. / Stage mm mm Nm³/hr Kw Nm³/hr Kw mm mm mm kg
2K20 2/2 42 100/45 13 2,5 20 4 740 560 630 190
2K25 2/2 52 100/45 16 3,3 25 5,3 750 560 630 190
2K28 2/2 60 100/45 18 4,0 28 6,2 750 560 630 205
2K30 2/2 52 110/50 20 4,3 30 6,5 750 560 630 210
2K35 2/2 60 110/50 23 4,9 35 7,3 750 560 630 210
2K55 2/2 70 130/60 36 7,0 55 10,7 1340 950 775 750
2K75 2/2 70 150/68 49 9,5 75 14,5 1340 950 775 760
2K85 2/2 80 150/68 56 10,8 85 16,5 1425 950 775 785
2K125 2/2 80 180/82 82 15,9 125 24,2 1450 1005 915 825
2K155 2/2 70 210/95 102 19,7 155 30,0 1475 1005 915 855
2K170 2/2 80 210/95 111 21,6 170 32,9 1500 1005 915 910
4K215 4/2 70 180/82 141 27,3 215 41,7 2030 1005 985 1295
4K245 4/2 80 180/82 161 31,1 245 47,5 2175 1005 985 1410
4K340 4/2 80 210/95 223 43,2 340 65,9 2280 1005 985 1525
Rated details at 30bar. Nominal conditions, 20oC, 1013mbar

6 Deno Compressors
Deno water-cooled
starting air compressors
Water-Cooled 60
0 Hz • Max pressure 40bar
• Capacity is free air delivery at 30bar (F.A.
(F.A.D.)
• Max ambient temperature 55ºC
The DENO 2K & 4K series are 2 stage, direct driven, piston
• Suitable for fresh & sea water cooling, max 40ºC
type starting air compressors.
• Standard voltage 440~460V / 3Ph / 60Hz
The compressors can be delivered as loose units as well as
• Non standard voltages and pressure upon request
completely assembled starting air skids for easy installation
and direct start-up. The compressors operation is fully
automatic and complies to the rules and regulations of all
major classification societies.

Technical Data
1150 rpm 1750 rpm
Model Qty Stroke Bore LP/HP Capacity F.A.D. Req. power Capacity F.A.D. Req. power Lenght Width Height Weight
Cyl. / Stage mm mm Nm³/hr Kw Nm³/hr Kw mm mm mm kg
2K20 2/2 42 100/45 16 3,2 24 4,8 740 560 630 190
2K25 2/2 52 100/45 20 4,2 30 6,4 750 560 630 190
2K28 2/2 60 100/45 22 4,9 35 7,5 750 560 630 205
2K30 2/2 52 110/50 24 5,2 36 7,8 750 560 630 210
2K35 2/2 60 110/50 28 5,9 42 8,7 750 560 630 210
2K55 2/2 70 130/60 44 8,5 66 12,9 1340 950 775 750
2K75 2/2 70 150/68 59 11,5 91 17,5 1340 950 775 760
2K85 2/2 80 150/68 67 13,1 103 19,9 1425 950 775 785
2K125 2/2 80 180/82 99 19,2 151 29,2 1450 1005 915 825
2K155 2/2 70 210/95 123 23,8 187 36,3 1475 1005 915 855
2K170 2/2 80 210/95 135 26,1 205 39,8 1500 1005 915 910
4K215 4/2 70 180/82 171 33,0 259 50,3 2030 1005 985 1295
4K245 4/2 80 180/82 194 37,7 296 57,3 2175 1005 985 1410
4K340 4/2 80 210/95 270 52,3 410 79,5 2280 1005 985 1525
Rated details at 30bar. Nominal conditions, 20oC, 1013mbar

Deno Compressors 7
• Capacity is free air
delivery (F.A.D.)
• Max. ambient temperature
55ºC
• Standard air cooled.
Optionally fresh & sea
water cooled
• Standard voltage
380~415V / 3Ph / 50Hz
• Standard voltage
440~460V / 3Ph / 60Hz
• Non standard voltages and
pressure upon request

Deno rotary screw compressors

Belt driven 3 upto
pto 65 Kw
The DENO DSA series 3 upto 65Kw are belt driven, rotary screw compressors. The compressors are delivered with
sound reducing enclosure with quick release panels for easy check & maintenance. The compressors operation is
fully automatic by use of a sophisticated and user friendly PLC panel.

Technical Data
50 Hz 60 Hz
Model Pressure Capacity F.A.D. Motor power Capacity F.A.D. Motor power Lenght Width Height Weight
Bar Nm³/min Nm³/hr Kw Nm³/min Nm³/hr Kw mm mm mm kg
8 0,47 28 0,53 32
DSA3 10 0,43 26 3,0 0,49 29 3,5 810 790 1110 245
13 0,38 23 0,43 26
8 0,65 39 0,74 44
DSA4 10 0,58 35 4,0 0,66 40 4,7 810 790 1110 260
13 0,45 27 0,51 31
8 0,79 47 0,90 54
DSA5 10 0,70 42 5,5 0,80 48 6,4 810 790 1110 270
13 0,55 33 0,63 38
8 1,20 72 1,37 82
DSA7 10 1,00 60 7,5 1,14 68 8,8 810 790 1110 280
13 0,80 48 0,91 55
8 1,70 102 1,93 116
DSA11 10 1,50 90 11,0 1,71 102 12,9 810 790 1110 320
13 1,30 78 1,48 89
8 2,20 132 2,50 150
DSA15 10 2,00 120 15,0 2,28 137 17,6 810 790 1110 340
13 1,70 102 1,93 116
8 3,10 186 3,53 212
DSA18 10 2,70 162 18,5 3,07 184 21,7 1100 750 1570 480
13 2,10 126 2,39 143
8 3,60 216 4,10 246
DSA22 10 3,20 192 22,0 3,64 218 25,8 1100 750 1570 510
13 2,70 162 3,07 184
8 4,70 282 5,35 321
DSA30 10 4,40 264 30,0 5,01 300 35,2 1100 1270 1570 780
13 3,80 228 4,32 259
8 5,70 342 6,49 389
DSA37 10 5,20 312 37,0 5,92 355 43,4 1100 1270 1570 810
13 4,30 258 4,89 294
8 7,30 438 8,31 498
DSA45 10 6,30 378 45,0 7,17 430 52,8 1450 1160 1605 1100
13 5,60 336 6,37 382
8 8,30 498 9,44 567
DSA55 10 7,70 462 55,0 8,76 526 65,0 1450 1160 1605 1140
13 6,50 390 7,40 444
Rated details at nominal conditions, 20oC, 1013mbar

8 Deno Compressors
 • Capacity is free air
delivery (F.A.D.)
• Max. ambient temperature
55ºC
• Standard fresh & sea
water cooled. Optionally
air cooled
• Standard voltage
380~415V / 3Ph / 50Hz
• Standard voltage
440~460V / 3Ph / 60Hz
• Non standard voltages
and pressure upon request

Deno rotary screw compressors

Direct driven 45 upto 363 Kw
The DENO DSD series 45 upto 363Kw are direct driven, rotary screw compressors. The compressors can be delivered as
standard units or as custom build packages with integrated water separators, filters and dryers, minimizing installation
space. The compressors operation is fully automatic by use of a sophisticated and user friendly PLC panel.

Technical Data
50 Hz 60 Hz
Model Pressure Capacity F.A.D. Motor power Capacity F.A.D. Motor power Lenght Width Height Weight
Bar Nm³/min Nm³/hr Kw Nm³/min Nm³/hr Kw mm mm mm kg
8 7,30 438 8,31 498
DSD45 10 6,30 378 45 7,17 430 53 2350 1150 1650 1550
13 5,60 336 6,37 382
8 8,30 498 9,44 567
DSD55 10 7,70 462 55 8,76 526 65 2350 1150 1650 1625
13 6,50 390 7,40 444
8 13,10 786 14,91 894
DSD75 10 11,40 684 75 12,97 778 85 2350 1150 1800 1825
13 9,80 588 11,15 669
8 15,70 942 17,87 1072
DSD90 10 13,70 822 90 15,59 935 104 2350 1150 1800 1975
13 12,00 720 13,66 819
6 20,90 1254 23,78 1427
DSD110 8 19,40 1164 110 22,08 1325 127 2950 1150 1800 2275
10 17,00 1020 19,34 1161
13 14,40 864 16,39 983
6 24,80 1488 28,22 1693
DSD132 8 23,30 1398 132 26,51 1591 152 2950 1150 1800 2450
10 20,10 1206 22,87 1372
13 17,10 1026 19,46 1168
6 29,10 1746 33,11 1987
DSD160 8 27,90 1674 160 31,75 1905 184 2950 1150 1800 2625
10 25,10 1506 28,56 1714
13 21,70 1302 24,69 1482
6 34,00 2040 38,69 2321
DSD200 8 32,00 1920 200 36,41 2185 230 2950 1450 2250 2875
10 30,00 1800 34,14 2048
13 24,00 1440 27,31 1639
6 45,50 2730 51,78 3107
DSD250 8 43,60 2616 250 49,61 2977 288 2950 1450 2250 3125
10 39,20 2352 44,61 2676
13 33,90 2034 38,58 2315
6 57,30 3438 65,20 3912
DSD315 8 54,90 3294 315 62,47 3748 363 2950 1450 2250 3350
10 49,40 2964 56,21 3373
13 42,70 2562 48,59 2915
Rated details at nominal conditions, 20oC, 1013mbar

Deno Compressors 9
 Deno service air package
• Capacity
ity is free air delivery (F.A.D.)
• Max. ambient temperature 55ºC
Deno DPA series
• The DPA2
PA2 is available with 1ph & 3ph motor
The DENO DPA series are air cooled, belt driven, piston type
• The DPA3
PA3 is available with 3ph motor
service air compressors.
• Non standard voltages and pressure upon request
The compressors are mounted on top of a 50lt or 100ltr air
receiver and are completely ready for direct installation and
start up.

Technical Data
Qty 50 Hz 60 Hz
Pressure Receiver
Model Capacity F.A.D. Motor power Capacity F.A.D. Motor power Lenght Width Height Weight
Cyl. / Volume
Bar Nm³/hr Kw Nm³/hr Kw mm mm mm kg
Stage Ltr
8 13 17
DPA2 2/1 2,2 2,7 50 850 450 850 40
10 11 15
8 13 17
DPA2 2/1 2,2 2,7 100 950 500 875 80
10 11 15
8 29 35
DPA3 3/1 3 3,6 50 900 450 1000 55
10 27 32
8 29 35
DPA3 3/1 3 3,6 100 950 500 1025 95
10 27 32
Rated details at nominal conditions, 20oC, 1013mbar

10 Deno Compressors
Deno nitrogen generators
Nitrogen
n generators
The Deno nitrogen generators are based on the If required, remote controls for bridge and
membrane technology. Capacity ranges from 100 deck positions are available. The generators
Nm /hr up to 1600 Nm /hr. with a purity of 95%
3 3
are only delivered with Deno feed air
or 98%. Quality of the inlet air is controlled by a compressors fitted with a dryer for optimal
carbon filter and a fine dust filter together with production of Nitrogen gas. The total
a heater ensuring an effective use of the Nitrogen plant complies with the
membranes. The controls are very easy to operate. regulations of major Classification Societies.

Technical Data
Model Pressure Nitrogen Production Compressor Power Connections
Bar 95% Nm³/hr 98% Nm³/hr Kw In/Out
DN2-100 9 100 45 305 31 DN25
DN2-200 9 200 90 610 63 DN40
DN2-300 9 300 135 915 95 DN50
DN2-400 9 400 180 1220 126 DN50
DN2-500 9 500 225 1525 158 DN65
DN2-600 9 600 270 1830 189 DN65
DN2-700 9 700 315 2135 221 DN65
DN2-800 9 800 360 2440 248 DN65
DN2-900 9 900 405 2745 279 DN65
DN2-1000 9 1000 450 3050 310 DN65
DN2-1200 9 1200 540 3660 372 DN80
DN2-1300 9 1300 585 3965 403 DN80
DN2-1400 9 1400 630 4270 434 DN80
DN2-1500 9 1500 675 4575 465 DN80
DN2-1600 9 1600 720 4880 496 DN80
Rated details at nominal conditions, 20⁰C, 1013mbar

Deno Compressors 11
Deno air dryers
Refrigeration air dryers Absorption dryer
Water vapour in compressed air systems Although the common refrigeration dryers are
condensates to water when cooled. This excellent for providing lower cost ‘dry’ compressed
condensation will reduce the efficiency and air, they cannot achieve pressure dew points
reliability of the compressed air application. down below 3°C because the
Refrigeration air dryers are a cost effective water vapour in the
solution for this problem. compressed air would freeze,
blocking pipes and damaging
downstream equipment.
To provide pressure points
down to - 40°C or lower,
in that case an absorption
dryer is then, the most
effective solution. A self
cleaning stainless steel
wedge shaped support
screen ensures lower
differential pressures.

www.denocomp.nl
o f E xcell ence
90 Y e a r s
n
More tha
Deno Compressors 12
 Deno starting air Skids
Skid Versions
The DENO starting air skids are available in a wide
range of standard units as well as custom build


packages.
Any configuration is available air and water cooled
compressors.


Air dryers, reducing stations and air receivers can be

 
 integrated to form on easy to install








; 
4






Other designs on request

13 Deno Compressors