Tecra A11 Series Users Guide

If you need assistance: Toshibas Support Web site pcsupport.toshiba.com Toshiba Customer Support Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273

For more information, see If Something Goes Wrong on page 179 in this guide.

GMAD00237010 11/09

2
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Model: Tecra A11 Series Recordable and/or ReWritable Drive(s) and Associated Software Warranty
The computer system you purchased may include Recordable and/or ReWritable optical disc drive(s) and associated software, among the most advanced data storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed or provided electronically. If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

3
Critical Applications
The computer you have purchased is not designed for any critical applications. Critical applications means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage. ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice Declaration of Conformity Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

NOTE

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports. Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user's authority to operate the equipment.

4
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.

Contact either:

Toshibas Support Web site at pcsupport.toshiba.com. Or call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273

Industry Canada Requirement

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conform la norme NMB-003 du Canada.

FCC requirements
The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems and is only applicable if your computer has a modem. This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, the information must be provided to the telephone company. The modem connects to the telephone line by means of a standard jack called the USOC RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC part 68 rules and requirements adopted by the ACTA. It is designed to be connected to a compatible modular jack that is also compliant. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by the ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

5
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations or procedures. If these changes might affect your service or the operation of your equipment, the telephone company will give you notice, in writing, to allow you to make any changes necessary to maintain uninterrupted service.

If Problems Arise
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advanced notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. If trouble is experienced with this equipment, for repair or standard limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Customer Support Center within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

Disconnection
If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change.

Fax Branding
The following information is only applicable if your computer has the capability to send and receive fax transmissions. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including Fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

6
In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer.

Alarm Equipment
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Instructions for IC CS-03 Certified Equipment

1 NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. 2 The user manual of analog equipment must contain the equipments Ringer Equivalence Number (REN) and an explanation notice similar to the following: The Ringer Equivalence Number (REN) of this device can be found on the label affixed to your computer. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

7
3 The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C.

Wireless Interoperability
The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to:

The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of Electrical and Electronics Engineers. The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance. The Wi-Fi CERTIFIED logo is a certification mark of the Wi-Fi Alliance. Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off your Bluetooth or Wireless LAN device. Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

NOTE

The above caution applies to products that operate with an 802.11a radio device.

8
Wireless LAN and Your Health
Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

Using the Wireless LAN equipment on board airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment. Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Regulatory Information
The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.

9
Canada Industry Canada (IC)
This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas Web site www.hc-sc.gc.ca/rpb. The RF device shall not be co-located with any other transmitter that has not been tested with this device. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme sil est susceptible de compromettre son fonctionnement. The term IC before the equipment certification number only signifies that the Industry Canada technical specifications were met. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant lobjet dune licence, il doit etre utilize a linterieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne demission) est installe a lexterieur, il doit faire lobjet dune licence. This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. Industry Canada requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

NOTE

The above caution applies to products that operate with an 802.11a radio device.

10
EU Declaration of Conformity
TOSHIBA declares that this product conforms to the following Standards: Supplementary *The product complies with the Information: requirements of the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and/or the R&TTE Directive 1999/5/EC. This product is carrying the CE-Mark in accordance with the related European Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.

The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive Information
The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive is intended to protect the quality of the environment and human health through the responsible use of natural resources and the adoption of waste management strategies that focus on recycling and reuse. This Directive requires producers of electrical and electronic products put on the market in European Union (EU) member countries after August 2005 to mark such products with a crossed-out wheeled bin with a black bar symbol. If the products battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled bin symbol on the battery.

Pb, Hg, Cd

In the European Union, these symbols indicate that when the last end user wishes to discard this product, it must be sent to appropriate facilities for recovery and recycling. This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products. Please contact your local government for applicable laws and regulations governing the disposal of this product. For information on how to trade-in or recycle your product, visit www.reuse.toshiba.com.

11
VCCI Class B Information

Modem Warning Notice

This information is only applicable if your computer has a modem.

Conformity Statement
The equipment has been approved to [Commission Decision CTR21] for panEuropean single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance.

Taiwan
Article 14 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued. Operation of such products can be resumed only when they are modified and can no longer cause interference. The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

Article 17

12
Using this Equipment in Japan
In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station). 1. Sticker Please put the following sticker on devices incorporating this product.
The frequency bandwidth of this equipment may operate within the same range as industrial devices, scientific devices, medical devices, microwave ovens, licensed radio stations and non-licensed specified low-power radio stations for mobile object identification systems (RFID) used in factory product lines (Other Radio Stations). 1. Before using this equipment, ensure that it does not interfere with any of the equipment listed above. 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.

2. Indication The indication shown below appears on this equipment.

(1) (2) (3)

2.4DSOF4
(4)

1 2 3 4

2.4: This equipment uses a frequency of 2.4 GHz. DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. The interference range of this equipment is less than 40m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems.

13
The indication shown below appears on this equipment.
(1) (2) (3)

2.4FH1
(4)

1 2 3 4

2.4: This equipment uses a frequency of 2.4 GHz. FH: This equipment uses FH-SS modulation. The interference range of this equipment is less than 10m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz.

3. TOSHIBA Direct PC Monday Friday: 10:00 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850 Fax: 03-3457-4868

Device Authorization
This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan. The name of the radio equipment: refer to the equipment label provided on the computer Approved by both the JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS EQUIPMENT and the TELECOM ENGINEERING CENTER The following restrictions apply:

Do not disassemble or modify the device. Do not install the embedded wireless module into other device. 5.17 GHz to 5.23 GHz for indoor use only.

14
Radio Approvals for Wireless Devices
NOTE
The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models.

Approved Countries/Regions for the Intel Wireless Wi-Fi Link 5100/5300 Series
This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Andorra Argentina CNC: 533AN_HMW: CNC C-6367 533AN_MMW: CNC C-6366 512AN_HMW: CNC C-6373 512AN_MMW: CNC C-6374 Azerbaijan Bermuda Bulgaria Canada China Croatia Czech Republic Ecuador Estonia France Germany Greece Guatemala Hong Kong India Israel Jordan Latvia Lithuania Australia

Austria Belgium Brazil Cambodia Chile Costa Rica Cyprus Dominican Republic Egypt Finland French Polynesia Gibraltar Guam Honduras Iceland Ireland Japan Kuwait Liechtenstein

Bahrain Bosnia Caicos Islands Cayman Islands Colombia Curacao, Netherlands Antilles Denmark El Salvador Falkland Islands French Guinea Ghana Guadeloupe Herzegovina Hungary Indonesia Italy Kenya Lebanon Luxemburg

15
Malawi Martinique Monaco Morocco New Zealand Oman Paraguay Poland Qatar Russia San Marino Singapore South Africa Sri Lanka Tahiti Turk Islands United Kingdom Vatican Virgin Islands Malaysia Mayotte Montenegro Netherlands Nicaragua Pakistan Peru Portugal Runion Saint Martin Saudi Arabia Slovakia South Korea Sweden Taiwan Ukraine Uruguay Venezuela Zimbabwe Malta Mexico Montserrat New Caledonia Norway Panama Philippines Puerto Rico Romania Saipan Serbia Slovenia Spain Switzerland Turkey UAE (United Arab Emirates) USA Vietnam

Approved Countries/Regions for the Atheros Wireless Wi-Fi Link AR5B95 Series
This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Argentina CNC: 693 GI/2007 3655 GI/2007 Azerbaijan Belgium Brazil Cambodia China Cyprus Dominican Republic El Salvador Australia

Austria Bangladesh Bosnia Bulgaria Chile Croatia Denmark Egypt

Bahrain Bolivia Brunei Canada Colombia Czech Republic Ecuador Estonia

16
Finland Ghana Herzegovina Hungary Indonesia Italy Jordan Kuwait Lebanon Lithuania Malaysia Monaco Nambia New Zealand Norway Panama Peru Portugal Romania Senegal Slovak Republic South Korea Sweden Thailand Ukraine USA Yemen France Greece Honduras Iceland Iraq Jamaica Kazakhstan Kyrgyzstan Lesotho Luxembourg Malta Montenegro Nepal Nicaragua Oman Papua New Guinea Philippines Puerto Rico Russia Serbia Slovenia Spain Switzerland Turkey United Kingdom Venezuela Zimbabwe Germany Guatemala Hong Kong India Ireland Japan Kenya Latvia Liechtenstein Macedonia Mexico Mozambique Netherlands Nigeria Pakistan Paraguay Poland Qatar Saudi Arabia Singapore South Africa Sri Lanka Taiwan UAE (United Arab Emirates) Uruguay Vietnam

Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries
Belgi/ Belgique: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT. Voor priv-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig. Voor registratie of licentie kunt u contact opnemen met BIPT.

17
Dans le cas dune utilisation prive, lextrieur dun btiment, audessus dun espace public, aucun enregistrement nest ncessaire pour une distance de moins de 300m. Pour une distance suprieure 300m un enregistrement auprs de lIBPT est requise. Pour les enregistrements et licences, veuillez contacter lIBPT. License required for outdoor installations. Check with reseller for procedure to follow. Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigungspflichtig. Bitte mit Hndler die Vorgehensweise abstimmen. Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454 MHz respectively) may be used outdoors in France. Please contact A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow. Bande de frquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz respectivement) doivent tre utiliss endroits extrieur en France. Vous pouvez contacter lAutorit de Rgulation des Tlcommunications (http://www.art-telecom.fr) pour la procdure suivre. License required for indoor use. Use with outdoor installations not allowed. necessaria la concessione ministeriale anche per luso interno. Verificare con i rivenditori la procedura da seguire. License required for outdoor installations. Check with reseller for procedure to follow. Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste procedure.

Deutschland:

France:

Italia:

Nederland:

Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries

European Community Countries 5150-5250 MHz 5250-5350 MHz
Channels: 36, 40, 44, 48

5470-5725 MHz Indoor/Outdoor x x O

Channels: 52, 56, 60, Channels: 100, 104, 108, 112, 64 116, 120, 124, 128, 132, 136, 140

Austria Belgium, France, Switzerland/Liechtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK

Indoor Only O O O

Indoor Only x O O

18
European Community Countries 5150-5250 MHz 5250-5350 MHz
Channels: 36, 40, 44, 48

5470-5725 MHz Indoor/Outdoor O

Channels: 52, 56, 60, Channels: 100, 104, 108, 112, 64 116, 120, 124, 128, 132, 136, 140

Iceland, Spain

Indoor Only O

Indoor Only O

O: allowed x: forbidden

To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply. The user should use the wireless LAN utility to check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network. The 5 GHz Turbo mode feature is not allowed for operation in any European Community country. This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption of operation of this device. The Access Points radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.

Approved Countries/Regions for the Realtek RTL8192E

This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia Cambodia Argentina Azerbaijan Belgium Brazil Canada Australia Bahrain Bolivia Bulgaria Chile

19
China Croatia Denmark Egypt Finland Ghana Honduras Iceland Ireland Japan Kenya Latvia Liechtenstein Macedonia Mexico Mozambique Nicaragua Pakistan Paraguay Poland Qatar Serbia Slovenia Spain Switzerland Trinidad United Kingdom Venezuela Colombia Cyprus Dominican Republic El Salvador France Greece Hong Kong India Israel Jordan Kuwait Lebanon Lithuania Malaysia Monaco Netherlands Norway Panama Peru Portugal Romania Singapore South Africa Sri Lanka Taiwan Turkey Uruguay Vietnam Costa Rica Czech Republic Ecuador Estonia Germany Herzegovina Hungary Indonesia Italy Kazakhstan Kyrgyzstan Lesotho Luxembourg Malta Morocco New Zealand Oman Papua New Guinea Philippines Puerto Rico Saudi Arabia Slovak Republic South Korea Sweden Thailand UAE (United Arab Emirates) USA Zimbabwe

Approved Countries/Regions for the Realtek RTL8191SE

This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia Argentina Azerbaijan Belgium Brazil Australia Bahrain Bolivia Bulgaria

20
Cambodia China Croatia Denmark Egypt Finland Germany Hong Kong India Israel Japan Kenya Latvia Lithuania Malaysia Monaco Netherlands Antilles Norway Panama Peru Portugal Romania Serbia Slovenia Spain Switzerland Trinidad UAE (United Arab Emirates) Uruguay Vietnam Canada Colombia Cyprus Dominican Republic El Salvador France Greece Hungary Indonesia Italy Jordan Kuwait Lebanon Luxembourg Malta Morocco Netherlands Oman Papua New Guinea Philippines Puerto Rico Russia Singapore South Africa Sri Lanka Taiwan Tunisia Ukraine USA Zimbabwe Chile Costa Rica Czech Republic Ecuador Estonia Ghana Herzegovina Iceland Ireland Jamaica Kazakhstan Kyrgyzstan Liechtenstein Macedonia Mexico Mozambique New Zealand Pakistan Paraguay Poland Qatar Saudi Arabia Slovak Republic South Korea Sweden Thailand Turkey United Kingdom Venezuela

21
Approved Countries/Regions for the Realtek RTL8187B
This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Australia Bahrain Bolivia Brunei Canada Colombia Cyprus Dominican Republic El Salvador France Greece Honduras Iceland Ireland Japan - Jate Kazakhstan Kuwait Lesotho Luxembourg Malta Morocco New Zealand Norway Panama Peru Portugal Romania Senegal Slovak Republic South Korea Sweden Thailand UAE (United Arab Emirates) USA Yemen Algeria Austria Bangladesh Bosnia Bulgaria Chile Costa Rica Czech Republic Ecuador Estonia Germany Guatemala Hong Kong India Israel Japan - Teleco Kenya Latvia Liechtenstein Macedonia Mexico Mozambique Nicaragua Oman Papua New Guinea Philippines Puerto Rico Russia Serbia and Montenegro Slovenia Spain Switzerland Turkey United Kingdom Venezuela Zimbabwe Argentina Azerbaijan Belgium Brazil Cambodia China Croatia Denmark Egypt Finland Ghana Herzegovina Hungary Indonesia Italy Jordan Kyrgyzstan Lebanon Lithuania Malaysia Monaco Netherlands Nigeria Pakistan Paraguay Poland Qatar Saudi Arabia Singapore South Africa Sri Lanka Taiwan Ukraine Uruguay Vietnam

22
Bluetooth Wireless Technology Interoperability
Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:

Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group. Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special Interest Group. Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth products with all computers and/or equipment using Bluetooth wireless technology other than TOSHIBA portable computers. Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information. When you use Bluetooth cards from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth cards from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards or more) or stop transmitting from your computer. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/ computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information. Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either one of your Bluetooth or Wireless LAN. Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

23
Approved Countries/Regions for use (Bluetooth wireless technology)
Bluetooth Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Argentina Belgium Chile Czech Republic Estonia Germany Hungary Italy Korea Lebanon Luxembourg New Zealand Peru Portugal Slovenia Switzerland Uruguay Australia Bulgaria China Denmark Finland Greece Iceland Japan Kuwait Liechtenstein Malta Norway Philippines Singapore Spain Thailand USA Austria Canada Cyprus Egypt France Hong Kong Ireland Jordan Latvia Lithuania Netherlands Oman Poland Slovakia Sweden UK Venezuela

Bluetooth Wireless Technology and Your Health

The products with Bluetooth wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is much less than the electromagnetic energy emitted by wireless devices such as mobile phones. Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

24
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

Using the equipment with Bluetooth wireless technology on board airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the device with Bluetooth wireless technology prior to turning on the equipment. Exposure to Radio Frequency Radiation The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.

Regulatory statements
This product complies with any mandatory product specification in any country/ region where the product is sold. In addition, the product complies with the following:

European Union (EU) and EFTA

This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly.

Canada Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

Taiwan
Article 14 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued. Operation of such products can be resumed only when they are modified and can no longer cause interference.

Article 17

25
The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

Optical Disc Drive Safety Instructions

This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT. To use this model properly, read the users guide carefully and keep it for your future reference. Never attempt to disassemble, adjust or repair an optical disc drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.

Location of the Required Label

(Sample shown below. Location of the label and manufacturing information may vary.)

Copyright
This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein. 2009 by Toshiba America Information Systems, Inc. All rights reserved.

26
Export Administration Regulation
This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and may be subject to the approval of the U.S. Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the U.S. Export Administration Regulations is prohibited.

Notice
The information contained in this manual, including but not limited to any product specifications, is subject to change without notice. TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

27
Trademarks
Tecra, Accupoint, ConfigFree, and eco Utility are either registered trademarks or trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Atheros is a registered trademark of Atheros Communications, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners. DisplayPort is a wordmark of the Video Electronics Standards Association. ExpressCard is a registered trademark of PCMCIA. Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Memory Stick, Memory Stick Duo, Memory Stick PRO, and Memory Stick PRO Duo are trademarks or registered trademarks of Sony Corporation. Microsoft, Outlook, Windows, and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. MultiMediaCard and MMC are registered trademarks of MultiMediaCard Association. Secure Digital and SD are trademarks of SD Card Association. TouchPad is a trademark of Synaptics, Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other brand and product names are trademarks or registered trademarks of their respective companies.

Computer Disposal Information

As part of Toshibas commitment to preserving the environment, Toshiba supports various trade-in and recycling programs. For details, please visit www.laptops.toshiba.com/green.

Contents
Introduction................................................................................ 36
This guide ...............................................................38 Safety icons ............................................................39 Other icons used...............................................39 Your computers features and specifications ....40 Other documentation ..............................................40 Service options .......................................................40

Chapter 1: Getting Started......................................................... 41

Selecting a place to work ........................................41 Setting up a work environment .........................41 Keeping yourself comfortable ...........................42 Precautions.......................................................42 Important information on your computers cooling fan ..................................................44 Setting up your computer .......................................44 Connecting to a power source ................................45 Charging the main battery.......................................47 Using the computer for the first time ......................48 Opening the display panel .................................48

28

Contents

29

Turning on the power .......................................49 Setting up your software...................................49 Registering your computer with Toshiba ................50 Adding optional external devices.............................50 Adding memory (optional) ......................................51 Installing a memory module .............................51 Removing a memory module............................58 Checking total memory .....................................60 Recovering the Internal Storage Drive ....................61 Recovering to out-of-box state (recommended recovery method)...............62 Recovering to a custom size partition ...............65 Recovering without changing the internal storage drive partitions ...............................67 Creating recovery DVDs/media .........................70 Restoring from recovery DVDs/media ..............72 Erasing the Internal Storage Drive ..........................74 Checking the internal storage drive operating status ................................................76 Installing drivers and applications.....................76 Using the Toshiba Dual Pointing Device .................77 Using the TouchPad.............................................77 Scrolling with the TouchPad ..........................78 Control buttons .................................................78 Disabling or enabling the TouchPad ..............78 Using external display devices ................................79 Connecting an external monitor or projector ....79 Directing the display output when you turn on the computer ..................................80 Adjusting the quality of the external display......81 Using an external keyboard.....................................81 Using a mouse ........................................................81 Connecting a printer ...............................................81 Setting up a printer ...........................................82

30

Contents

Turning off the computer ........................................82 Options for turning off the computer ................83 Using the Shut down command........................85 Using and configuring Hibernation mode .........87 Using and configuring Sleep mode ...................90 Closing the display panel ..................................93 Customizing your computers settings....................93 Caring for your computer........................................93 Cleaning the computer ......................................93 Moving the computer........................................94 Using a computer lock ......................................94

Chapter 2: Learning the Basics................................................. 95

Computing tips .......................................................95 Using the keyboard .................................................96 Character keys .................................................96 Ctrl, Fn, and Alt keys .........................................97 Function keys....................................................97 Special Windows keys ...................................97 Starting a program..................................................98 Starting a program from the Start menu...........98 Starting a program from Windows Explorer ......................................................99 Starting a program using the Search programs and files field ............................100 Saving your work ..................................................100 Printing your work ................................................102 Backing up your work ...........................................103 Restoring your work .......................................103 Using the optical disc drive...................................104 optical disc drive components ........................104 Media control buttons.....................................105 Inserting an optical disc .................................106 Playing an audio CD........................................107

Contents

31

Playing optical media ......................................108 Recording optical media .................................108 Removing a disc with the computer on...........109 Removing a disc with the computer off ..........109 Caring for optical discs ..................................110 Toshibas online resources ...................................110

Chapter 3: Mobile Computing.................................................111

Toshibas energy-saver design..............................111 Running the computer on battery power ..............112 Battery Notice .................................................112 Power management ........................................113 Using additional batteries ...............................114 Charging batteries.................................................114 Charging the main battery...............................114 Charging the RTC battery................................115 Monitoring main battery power.............................116 Determining remaining battery power.............117 What to do when the main battery runs low....................................................118 Setting battery notifications ............................118 Conserving battery power ..............................119 Power Plans....................................................120 Using a hot key to set the Power Plan.............121 Using the TOSHIBA eco power plan......................122 Changing the main battery ....................................122 Removing the battery from the computer .......123 Inserting a charged battery .............................124 Taking care of your battery ...................................125 Safety precautions ..........................................125 Maintaining your battery .................................126 Disposing of used batteries ..................................127 Traveling tips ........................................................128

32

Contents

Chapter 4: Exploring Your Computers Features...................129

Exploring the desktop ...........................................129 Finding your way around the desktop .............130 Setting up for communications.............................132 Connecting your computer to a network .........133 Connecting a modem to a telephone line ........134 Exploring audio features .......................................135 Recording sounds...........................................135 Using external speakers or headphones..........136 Using the Web Camera .........................................136 Using an ExpressCard .........................................137 Inserting an ExpressCard ..............................137 Removing an ExpressCard ............................138 Using the Smart Card Reader ...............................138 Using the Memory card reader..............................139 Inserting memory media.................................139 Removing memory media...............................140 Using the eSATA/USB combo port........................141 Using the expansion port ......................................141

Chapter 5: Utilities....................................................................142
TOSHIBA Assist ....................................................143 Connect...........................................................144 Secure.............................................................145 Protect & Fix ...................................................146 Optimize..........................................................147 TOSHIBA Application Installer...............................148 Setting passwords ................................................149 Using an instant password..............................149 Using a supervisor password..........................150 Using a user password ...................................151 TOSHIBA Face Recognition Utility.........................153 TOSHIBA Security Assist ......................................154 TOSHIBA PC Diagnostic Tool Utility......................156 TOSHIBA HDD Protection Utility ...........................157

Contents

33

Mouse Utility ........................................................158 TOSHIBA Hardware Setup.....................................159 USB Sleep and Charge Utility ................................161 Starting the USB Sleep and Charge Utility.......161 USB Sleep and Charge ....................................161 Enabling USB Sleep and Charge .....................163 Power supply mode settings...........................163 TOSHIBA Zooming Utility......................................165 TOSHIBA Button Support......................................166 TOSHIBA Accessibility ..........................................167 Trusted Platform Module (TPM) ...........................168 Fingerprint Authentication Utility...........................169 Fingerprint utility limitations ...........................169 Using the Fingerprint Authentication Utility ........................................................169 Fingerprint Logon ...........................................170 Care and maintenance of your fingerprint reader .......................................................170 Fingerprint reader limitations ..........................172 TOSHIBA eco Utility ...........................................173 TOSHIBA Service Station ......................................174 TOSHIBA PC Health Monitor .................................174 ConfigFree ...........................................................175 Getting Started................................................175 ConfigFree Utilities........................................176

Chapter 6: If Something Goes Wrong ...................................179

Problems that are easy to fix ................................179 Problems when you turn on the computer............180 The Windows operating system is not working...........................................................183 Using Startup options to fix problems ............184 Internet problems ...........................................185 The Windows operating system can help you ....................................................185

34

Contents

Fixing a problem with Device Manager .................186 Checking device properties .............................186 Memory problems ................................................187 Power and the batteries ........................................187 Keyboard problems...............................................189 Display problems ..................................................189 Disk or storage drive problems.............................191 Error-checking ................................................191 Optical disc drive problems...................................193 Sound system problems .......................................194 ExpressCard problems ........................................194 ExpressCard checklist ...................................194 Resolving ExpressCard problems .................195 Printer problems ...................................................196 Modem problems..................................................197 Wireless networking problems..............................198 DVD operating problems.......................................199 Develop good computing habits ...........................200 Data and system configuration backup in the Windows operating system...............201 If you need further assistance...............................206 Before you contact Toshiba ............................206 Contacting Toshiba .........................................206 Other Toshiba Internet Web sites..........................207 Toshibas worldwide offices..................................207

Appendix A: Hot Keys/TOSHIBA Cards..................................209

Hot Key Cards .......................................................209 Using the Hot Key Cards .................................210 Application Cards..................................................211 Using the Application Cards............................212 Card Case........................................................213 Hot key functions ..................................................213 Volume Mute ..................................................214 Lock (Instant security) ....................................215 Power plan .....................................................216

Contents

35

Sleep mode .....................................................217 Hibernation mode ...........................................218 Output (Display switch) .................................219 Display brightness ..........................................220 Disabling or enabling wireless devices............221 Disabling or enabling the Toshiba Dual Pointing Device .........................................222 Zoom (Display resolution) ..............................223 Keyboard hot key functions ...........................223

Appendix B: Power Cord/Cable Connectors.......................... 224 Glossary.................................................................................... 225 Index.......................................................................................... 240

Introduction
Welcome to the world of powerful, portable, multimedia computing. With your Toshiba computer, your work and entertainment can accompany you wherever you go. Your computer model may be ENERGY STAR qualified. If the model you purchased is qualified, it is labeled with the ENERGY STAR logo on the computer and the following information applies. Toshiba is a partner in the Environmental Protection Agencys (EPA) ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes. To conserve energy, your computer is set to enter the low-power Sleep mode which shuts down the system and display within 15 minutes of inactivity in AC power mode. We recommend that you leave this and other energy saving features active, so that your computer will operate at its maximum energy efficiency. You can wake the computer from Sleep mode by pressing the power button. See the Mobile Computing section of the Toshiba Users Guide for more information on using power management settings to conserve computer energy.

36

Introduction

37

According to the EPA, a computer meeting the new ENERGY STAR specifications will use between 30% and 60% less energy depending on how it is used. If all U.S. households and businesses replaced old computers with new ENERGY STAR qualified models, we would save more than $2 billion in energy costs each year and avoid greenhouse gas emissions equivalent to nearly 3 million cars. If every computer purchased by businesses this year met the new ENERGY STAR requirements, businesses would save more than $1.6 billion over the lifetime of those models. That is equivalent to lighting 840 million square feet of U.S. commercial building space each year. During 2008, Americans, with the help of ENERGY STAR, saved about $19 billion dollars on their utility bills and avoided greenhouse gas emissions equivalent to those from 29 million vehicles. Visit http://www.energystar.gov or http://www.energystar.gov/powermanagement for more information regarding the ENERGY STAR Program.
NOTE

This computer is compatible with European Union Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.

NOTE

Certain Microsoft software product(s) included with this computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and Microsofts privacy policy will be detailed during initial launch of the product, or upon certain reinstallations of the software product(s) or reconfigurations of the computer, and may be completed by Internet or telephone (toll charges may apply). Some software may differ from its retail version (if available), and may not include user manuals or all program functionality.

38
NOTE

Introduction This guide

The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, please visit Toshibas Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice. For the most up-to-date product information about your computer, or to stay current with the various computer software or hardware options, visit Toshibas Web site at pcsupport.toshiba.com.

This guide
This guide introduces the computer's features as well as some basic procedures needed to perform tasks in Windows 7. You can: Read the entire guide from beginning to end. Skim through and stop when a topic interests you. Use the table of contents and the index to find specific information.

Introduction Safety icons

39

Safety icons
This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE

Provides important information.

Other icons used

Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon indicates technical information about the computer.

HINT: This icon indicates helpful hints and tips.

DEFINITION: This icon indicates the definition of a term used in the text.

40

Introduction Other documentation

Your computers features and specifications

Certain computer chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis, unless you have selected all those features. This information applies to all the features and icons described in this guide. Below are examples of some of the many possible icons used on your computer:

(Sample Illustration) System icons

Other documentation
Your computer comes with the following documentation: An electronic version of the users guide (this document) A Quick Start Card A Resource Guide It may also contain guides for other programs that may come with your system.

For accessory information, visit Toshibas Web site at accessories.toshiba.com.

Service options
Toshiba offers a full line of optional service programs to complement its standard limited warranty. Toshibas standard limited warranty, extended warranty, and service upgrade terms and conditions are available at warranty.toshiba.com. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see If Something Goes Wrong on page 179.

Chapter 1

Getting Started
This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The Instruction Manual for Safety and Comfort, that is shipped with your computer, contains important safety information. Please read the safety instructions carefully and make sure you fully understand the instructions before you attempt to use your computer in order to avoid potential hazards that could cause bodily injury, property damage, or damage the computer.

Selecting a place to work

Your computer is portable and designed to be used in a variety of circumstances and locations.

Setting up a work environment

Place the computer on a hard flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they may overheat. Read the Provide adequate ventilation section in the Instruction Manual for Safety and Comfort that is shipped with your computer.

41

42

Getting Started

Selecting a place to work

To keep your computer in prime operating condition, protect your work area from: Dust, moisture, and direct sunlight. Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. Extreme heat, cold, or humidity. Liquids and corrosive chemicals.

Keeping yourself comfortable

The Toshiba Instruction Manual for Safety and Comfort, included with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.

Precautions
Your computer is designed to provide optimum safety and ease of use, and to withstand the rigors of travel. You should observe certain precautions to further reduce the risk of personal injury or damage to the computer. Avoid prolonged physical contact with the underside or surface of the computer. Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1. Turn off the computer. 2. Disconnect the AC adaptor from the power plug socket and computer. 3. Remove the battery pack. Failure to follow these instructions could result in serious injury or permanent damage to the computer. Do not turn on the power again until you have taken the computer to an authorized service center.

Getting Started

Selecting a place to work

43

Avoid prolonged physical contact with the underside or surface of the computer. Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin.

Read the Avoid extended contact between computer base/palm rest and skin section in the Instruction Manual for Safety and Comfort that is shipped with your computer. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer. It could damage the computer or cause system failure. Never turn off the computer if a drive light indicates a drive is active. Turning off the computer while it is reading from or writing to a disk/disc or flash media may damage the disk/disc or flash media, the drive, or both. Keep the computer and disks away from objects that generate strong magnetic fields, such as large stereo speakers. Information on some disks is stored magnetically. Placing a magnet too close to a disk can erase important files. Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could damage the disc and possibly lose data. Scan all new files for viruses. This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus. You need a special program to check for viruses.

44

Getting Started

Setting up your computer

Important information on your computers cooling fan

Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode). In this condition, observe the following: Never cover your computer or AC adaptor with any object. Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater. Never cover or block the air vents including those located at the base of the computer. Always operate your computer on a hard flat surface. Using your computer on a carpet or other soft material can block the vents located at the base of the computer.

Overheating your computer or AC adaptor could cause system failure, computer or AC adaptor damage or a fire, possibly resulting in serious injury. Read the Provide adequate ventilation section in the Instruction Manual for Safety and Comfort that is shipped with your computer.
NOTE

The cooling fan location will vary depending on the computer.

Setting up your computer

TECHNICAL NOTE: You must complete all setup steps up to and including Setting up your software on page 49 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and ExpressCard. Your computer contains a rechargeable main battery that needs to be charged before you can use it. To use external power or to charge the battery you must attach the AC adaptor. See Connecting to a power source on page 45.

Getting Started

Connecting to a power source

NOTE

45

Please handle your computer carefully to avoid scratching or damaging the surface.

Connecting to a power source

Your computer requires power to operate. Use the power cord/cable and AC adaptor to connect the computer to a live electrical outlet, or to charge the computers battery. Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug directly. Failure to follow this instruction may damage the cord/cable, and/or result in a fire or electric shock, possibly resulting in serious injury.

Always confirm that the power plug (and extension cable plug if used) has been fully inserted into the socket, to ensure a secure electrical connection. Failure to do so may result in a fire or electric shock, possibly resulting in serious injury. Be careful if you use a multiple connector. An overload on one socket could cause a fire or electric shock, possibly resulting in serious injury.

Always use the TOSHIBA AC adaptor that was provided with your computer and the TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor or charger.

AC adaptor Power cord/cable AC adaptor cord

(Sample Illustration) Power cord/cable and AC adaptor

46
1

Getting Started

Connecting to a power source

To connect AC power to the computer: Connect the power cord/cable to the AC adaptor.

(Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
_ +

Plug the AC adaptor cord into the DC-IN on the back of the computer.

(Sample Illustration) Connecting the AC adaptor cord to the computer 3 Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows green. Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury. The computers main battery light gives you an indication of the main batterys current charge: Glows amber while the main battery is being charged (AC adaptor connected)

Getting Started

Charging the main battery

Glows green when the main battery is fully charged

47

Is unlit when the main battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the main battery pack. See Changing the main battery on page 122 for information on replacing the main battery.

NOTE

Charging the main battery

Before using the battery to power the computer, you must charge the battery. To charge the battery, leave the computer plugged into an AC power source with the computer turned off until the battery light glows green. After that, the battery will be completely charged and ready to power the computer. Once the battery is charged for the first time, avoid leaving the computer plugged in and turned off for more than a few hours at a time. Continuing to charge a fully charged battery can damage the battery.

TECHNICAL NOTE: The recharging of the battery cannot occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices. Your computers Power Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.

NOTE

Battery life and charge time may vary depending on the applications, power management settings, and features used.

48

Getting Started

Using the computer for the first time

Using the computer for the first time

The computer is now ready for you to turn it on and begin using it.

Opening the display panel

1 2 3 Facing the front of the computer, locate the center of the display panel. Gently raise the panel. Adjust the display to a comfortable viewing angle.

(Sample Illustration) Opening the display panel

NOTE

When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel.

To avoid damaging the display panel, do not force it beyond the point where it moves easily and never lift the computer by the display panel. Do not press or push on the display panel and be careful to remove any pens or other objects from the keyboard area before closing the display panel. Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using highprecision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate. This is also an intrinsic characteristic of the screen technology. When the computer is operated on battery power, the screen will dim and you may not be able to increase the brightness of the screen while on battery power.

Getting Started

Using the computer for the first time

49

Turning on the power

To turn on the computer: 1 Make sure any external devices (such as the AC adaptor, if you plan to use AC power rather than battery power) are properly connected and ready. Check to ensure that all drives and slots are empty. Press and release the power button. The ON/OFF light glows green.

2 3

(Sample Illustration) Turning on the power The preinstalled operating system will load automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.

Setting up your software

When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.

NOTE

The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices.

50

Getting Started

Registering your computer with Toshiba

The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. Follow the on-screen instructions.

Registering your computer with Toshiba

Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed by either visiting the Toshiba Web site at http://www.register.toshiba.com, or by clicking Start, All Programs, My Toshiba, and then Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty.
NOTE

To register online, you must be connected to the Internet.

Adding optional external devices

NOTE

Before adding external devices or memory, Toshiba recommends setting up your software. See Setting up your software on page 49.

After starting your computer for the first time you may want to: Add more memory (see Adding memory (optional) on page 51) Connect a mouse (see Using a mouse on page 81) Connect an external keyboard (see Using an external keyboard on page 81) Connect an external monitor (see Using external display devices on page 79) Connect a local printer (see Connecting a printer on page 81) Install an ExpressCard (see Using an ExpressCard on page 137)

Getting Started

Adding memory (optional)

51

Adding memory (optional)

HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of todays popular applications. You may want to increase the computers memory if you use complex software or process large amounts of data.
NOTE

Before adding external devices or memory, Toshiba recommends setting up your software. See Setting up your software on page 49.

Installing a memory module

Memory modules can be installed in the memory module slots on the base of the computer. You will need a small Phillips screwdriver for this procedure. If the computer has been running recently, the memory module(s) may be hot. The surrounding area may also be hot. Allow the module(s) to cool to room temperature before replacing it. Avoid touching the cover, the module(s), and the surrounding area before they have cooled. Failure to follow these directions could result in minor bodily injury.

To avoid damaging the computers screws, use a small Phillips screwdriver that is in good condition.

Installing a memory module with the computers power on may damage the computer, the module, or both.

52

Getting Started

Adding memory (optional)

The computer has two memory slotsSlot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Sleep or Hibernation mode, data will be lost.

NOTE

For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.

If the computer is on, begin at step 1; otherwise, skip to step 3. 1 Click Start.

Start button

Shut down button

(Sample Image) Shut down button 2 Click the Shut down button in the lower-right corner of the Start menu. The computer closes all open programs, shuts down the operating system, and then turns off. 3 4 Unplug and remove any cables connected to the computer, including the AC adaptor. Place a soft cloth on the work surface to prevent scratching the top cover of the computer, and then place the computer upside down on the cloth.

Getting Started

Adding memory (optional)

5

53

Remove the main battery. For information on removing the main battery, see Removing the battery from the computer on page 123.

Memory module slot cover

Front of computer

(Sample Illustration) Locating the memory module slot cover 6 Using a small Phillips screwdriver, loosen the captive screw that secure the memory module slot cover.

Front of computer

(Sample Illustration) Removing the memory module slot cover

54
7 8

Getting Started

Adding memory (optional)

Remove the memory module slot cover. Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.

Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. 9 Carefully remove the new memory module from its antistatic packaging, without touching its connector.

10 Locate an empty memory module slot on the underside of the computer.

NOTE

If no memory slot is available, you must remove a module by performing steps 2-3 of Removing a memory module on page 58.

NOTE

If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module.

NOTE

For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.

Getting Started

Adding memory (optional)

55

11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connectors notch with the matching key in the socket.

notch latch connector latch key

(Sample Illustration) Aligning the memory module with the socket 12 Firmly press the memory module into the memory slots socket at approximately a 30-degree angle (to the horizontal surface of the computer).

(Sample Illustration) Inserting the memory module into the socket

56

Getting Started

Adding memory (optional)

13 Once the modules connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should snap into place securely with the corresponding cutouts in the side of the module. If the latches and cutouts do not line up correctly, repeat steps 12-13.

latch

latch

(Sample Illustration) Pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place.
Back of computer

Slot B Slot A

(Sample Illustration) Inserting the memory module into the slot

NOTE

For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.

Getting Started

Adding memory (optional)

57

14 Replace the memory module slot cover and secure it using the screw. 15 Re-insert the main battery. For more information on inserting the main battery, see Inserting a charged battery on page 124. 16 Turn the computer right side up. Make sure to remove the soft cloth from the work surface before restarting the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode). In this condition, observe the following: Never cover your computer or AC adaptor with any object. Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater. Never cover or block the air vents including those located at the base of the computer. Always operate your computer on a hard flat surface. Using your computer on a carpet or other soft material can block the vents located at the base of the computer.

Overheating your computer or AC adaptor could cause system failure, computer or AC adaptor damage or a fire, possibly resulting in serious injury. 17 Reconnect the cables. 18 Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module. If you are adding extra memory after setting up the computer, verify that the computer has recognized it correctly as described in Checking total memory on page 60.

58
1

Getting Started

Adding memory (optional)

Removing a memory module

If you need to remove a memory module: Complete steps 18 in Installing a memory module on page 51 to shut down the computer and open the memory module slot cover. Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Sleep or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Sleep configuration will not be saved.

NOTE

The following screen may appear when you turn on the power:

If Start Windows Normally is highlighted, then press Enter. If one of the Safe Mode options is highlighted, it is best to press
Enter to go into Safe Mode, then shut down and restart the system, at

which time Windows should boot back up normally. When Safe Mode is suggested, this could be a sign that you may need to scan your internal storage drive for errors or defragment the drive. If so, consult Windows Help and Support.

Getting Started

Adding memory (optional)

2 Pull the latches away from the memory module. The memory module pops up slightly.
NOTE

59

If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module. Gently lift the memory module to a 30-degree angle and slide it out of the slot.
Back of computer

Slot B Slot A

(Sample Illustration) Removing the memory module 4 5 6 Replace the memory module slot cover and secure it using the screw. Re-insert the main battery. For more information on inserting the main battery, see Inserting a charged battery on page 124. Turn the computer right side up. Make sure to remove the soft cloth from the work surface before restarting the computer.

60

Getting Started

Adding memory (optional)

Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode). In this condition, observe the following: Never cover your computer or AC adaptor with any object. Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater. Never cover or block the air vents including those located at the base of the computer. Always operate your computer on a hard flat surface. Using your computer on a carpet or other soft material can block the vents located at the base of the computer.

Overheating your computer or AC adaptor could cause system failure, computer or AC adaptor damage or a fire, possibly resulting in serious injury. 7 8 Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.

Checking total memory

When you add or remove a memory module, you can check that the computer has recognized the change. To do this: Click Start, Control Panel, System and Security, and then System. The System window appears. Installed memory (RAM) is displayed below the System heading. If the computer does not recognize the memory configuration, turn off the computer and remove the memory module slot cover (complete steps 1-8 in Installing a memory module on page 51), and then check that the module is inserted completely into the socket and lined up squarely with the socket latches.

Getting Started

Recovering the Internal Storage Drive

NOTE

61

From time to time, Windows will display a pop-up that says, Do you want to allow the following program to make changes to this computer? This is a security feature to prevent programs or people from doing things on your computer without your permission. If you were trying to perform the action, click Continue; otherwise, click Cancel. If unsure, cancel and try again.

Recovering the Internal Storage Drive

Your computer includes recovery utilities to allow you to recover your internal storage drive if necessary. The following internal storage drive recovery options are available:

Recovery option

Description

Recover to out-of-box This option restores the original factory image to your state internal storage drive, returning your computer to its out-of-box state. (Recommended recovery method) See Recovering to out-of-box state (recommended recovery method) on page 62. This option allows you to specify a custom size for the C: partition and then restores your C: drive to its out-of-box state. Note: With this option, any changes you made to the C: drive and any other drive partitions you may have created are deleted.

Recover to a custom size partition

See Recovering to a custom size partition on page 65. Recover without This option recovers just your C: drive, leaving any other changing the internal partitions you may have created (for example, a D: drive) storage drive partitions intact. See Recovering without changing the internal storage drive partitions on page 67.

62

Getting Started

Recovering the Internal Storage Drive

A recovery image of your computer is stored on the internal storage drive, and the image can be restored by running the recovery utilities directly from your internal storage drive as described in the sections below. However, it is strongly recommended that you create recovery DVDs/media. If the recovery files on your internal storage drive become corrupted or are deleted, you can restore your system from your recovery DVDs/media. Also, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery DVDs/media. It is strongly recommended that you create recovery DVDs/media before using your system for the first time. See Creating recovery DVDs/media on page 70 and Restoring from recovery DVDs/media on page 72.

NOTE

During the internal storage drive recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor. The Toshiba Recovery Wizard also provides the option of erasing your internal storage drive, without restoring the information on the drive. See Erasing the Internal Storage Drive on page 74 for more information. When you restore your system, only the operating system files, applications, and drivers originally shipped with the computer are restored. Any files that you created are not restored during this process. Be sure to separately save the files you have created to external media using Windows Backup or another backup program. For more information, see Backing up your work on page 103.

Recovering to out-of-box state (recommended recovery method)

Recovering an internal storage drive to its out-of-box state deletes all partitions on the drive and all information stored in those partitions. Be sure to save your work to external media before executing the recovery. For more information, see Backing up your work on page 103.

NOTE

During the recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.

Getting Started

Recovering the Internal Storage Drive

63

You can recover the original factory image (returning the computer to its out-of-box state) using the utilities stored on your computers internal storage drive or using recovery DVDs/media, if you have created such media. To recover using the first method, follow the procedure below. To recover using the second method, see Restoring from recovery DVDs/media on page 72. To recover the original factory image using the utilities on your computers internal storage drive: 1 2 3 4 Make sure the computer is turned off. Press and hold the 0 (zero) key on your keyboard while powering on the computer. If your system offers a choice of Windows 7 32-bit or 64-bit operating system, select one at this time. If not, skip to step 4. A warning screen appears, stating that when the recovery is executed all data will be deleted and rewritten. Click Yes to continue.

(Sample Image) Warning screen

64
5

Getting Started

Recovering the Internal Storage Drive

When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next.

(Sample Image) Selecting a Process screen 6 The Recovery of Factory Default Software screen appears. Select Recover to out-of-box state.

(Sample Image) Recovery of Factory Default Software screen

Getting Started

Recovering the Internal Storage Drive

7 Click Next.

65

A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding (see Backing up your work on page 103). 8 Click Next to begin the recovery. When the process is complete, a message displays indicating that the internal storage drive has been recovered. 9 Press any key on the keyboard to restart the computer.

Recovering to a custom size partition

Recovering to a custom size partition deletes all partitions on the drive and all information stored in those partitions. Be sure to save your work to external media before executing the recovery. For more information, see Backing up your work on page 103.

NOTE

During the recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.

The Recover to a custom size partition option restores your C: drive to its out-of-box state, and allows you to specify the size for the C: partition. You can resize and recover the C: drive using the utilities stored on your computers internal storage drive or using recovery DVDs/media, if you have created such media. To recover using the first method, follow the procedure below. To recover using the second method, see Restoring from recovery DVDs/media on page 72. To resize and recover the C: drive using the utilities on your computers internal storage drive: 1 2 3 Make sure the computer is turned off. Press and hold the 0 (zero) key on your keyboard while powering on the computer. If your system offers a choice of Windows 7 32-bit or 64-bit operating system, select one at this time. If not, skip to step 4.

66
4

Getting Started

Recovering the Internal Storage Drive

A warning screen appears, stating that when the recovery is executed all data will be deleted and rewritten. Click Yes to continue.

(Sample Image) Warning screen 5 When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next.

(Sample Image) Selecting a Process screen

Getting Started

Recovering the Internal Storage Drive

6

67

The Recovery of Factory Default Software screen appears. Select Recover to a custom size partition.

(Sample Image) Recovery of Factory Default Software screen 7 8 Use the on-screen arrow buttons in The size of drive C: field to set the partition size. Click Next. A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding (see Backing up your work on page 103). 9 Click Next to begin the recovery. When the process is complete, a message displays indicating that the C: drive has been recovered. 10 Press any key on the keyboard to restart the computer.

Recovering without changing the internal storage drive partitions

Recovering without changing the internal storage drive partitions deletes all information stored on the C: drive. Be sure to save your work to external media before executing the recovery (see Backing up your work on page 103). If you have created other partitions (for example, a D: drive), those partitions will remain intact and any information on them will not be affected.

68
NOTE

Getting Started

Recovering the Internal Storage Drive

During the internal storage drive recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.

You can recover the C: drive without affecting other partitions by either using the utilities stored on your computers internal storage drive or by using recovery DVDs/media, if you have created such media. To recover using the first method, follow the procedure below. To recover using the second method, see Restoring from recovery DVDs/media on page 72. To recover using the utilities on your computers internal storage drive: 1 2 3 4 Make sure the computer is turned off. Press and hold the 0 (zero) key on your keyboard while powering on the computer. If your system offers a choice of Windows 7 32-bit or 64-bit operating system, select one at this time. If not, skip to step 4. A warning screen appears stating that when the recovery is executed all data will be deleted and rewritten. Click Yes to continue.

(Sample Image) Warning screen

Getting Started

Recovering the Internal Storage Drive

5

69

When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next.

(Sample Image) Selecting a Process screen 6 The Recovery of Factory Default Software screen appears. Select Recover without changing the hard drive partitions.

(Sample Image) Recovery of Factory Default Software screen

70
7

Getting Started

Recovering the Internal Storage Drive

Click Next. A confirmation message displays reminding you that all data on the C: drive will be lost during the recovery process. Be sure to save your work to external media before proceeding (see Backing up your work on page 103). 8 Click Next to begin the recovery. When the process is complete, a message displays, indicating that the C: drive has been recovered. 9 Press any key on the keyboard to restart the computer.

Creating recovery DVDs/media

It is strongly recommended that you create recovery DVDs/media. If the recovery files on your internal storage drive become corrupted or are deleted, you can restore your system from your recovery DVDs/media. Also, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery DVDs/media.
NOTE

When you create recovery DVDs/media, only the operating system files, applications, and drivers originally shipped with the computer are backed up to the external media and can be restored from this media. Any files that you created are not backed up on the recovery DVDs/media. You will need to separately back up the files you created; for more information, see Backing up your work on page 103.

When you create recovery DVDs/media, the system will prompt you to insert several blank DVDs or connect one or more USB flash drives of a certain minimum capacity to your computer. The amount of space required for storing the recovery files varies by computer model. Follow the procedure below to determine how much space you will need for storing your systems recovery files.

Getting Started

Recovering the Internal Storage Drive

To create recovery DVDs/media: 1

71

Click Start, All Programs, My Toshiba, and then Recovery Media Creator. The TOSHIBA Recovery Media Creator dialog box displays.

(Sample Image) TOSHIBA Recovery Media Creator dialog box 2 Select DVD or USB Flash from the drop-down lists next to System Recovery Media and Application Discs, depending on the type of external media you want to use. You cannot store your systems applications on the same drive or disc/disc set where the rest of the system recovery files are stored. For example, you will need to store the applications on one USB flash drive and the system recovery files on another USB flash drive. Or, store the applications on DVD and the system recovery files on a USB flash drive, or vice versa. Check the Information area of the dialog box to determine the number of DVDs you will need and/or the minimum amount of storage space required for copying your systems recovery files to USB flash drive(s).

NOTE

72
4

Getting Started

Recovering the Internal Storage Drive

Do one of the following: If you are copying files to DVD, insert a blank DVD into the optical disc drive. If you are copying files to a USB flash drive, connect a USB flash drive of the required minimum capacity (as specified in the TOSHIBA Recovery Media Creator utility) to your computer. All information stored on your DVDs or USB flash drive(s) will be erased during the process of creating the recovery DVDs/media. Be sure to save the information stored on your external media to another storage device before executing this procedure, or use blank media. 5 6 Click the Create button in the TOSHIBA Recovery Media Creator utility dialog box. Follow the on-screen prompts to complete the copy process. If you are copying the recovery files to DVDs, be sure to label each DVD in the set sequentially (for example, 1 of 3, 2 of 3, etc.), so that you will know in which order to insert the discs during recovery.

NOTE

For information on using the Recovery media you have created with the preceding steps, see Restoring from recovery DVDs/media on page 72.

Restoring from recovery DVDs/media

The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery (see Backing up your work on page 103).

NOTE

During the internal storage drive recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.

If you have created recovery DVDs/media for your system, you can restore your system from such media, if necessary. For example, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery DVDs/media. For instructions on creating recovery DVDs/media, see Creating recovery DVDs/media on page 70.

Getting Started

Recovering the Internal Storage Drive

With recovery media, you can:

73

Recover to out-of-box state (recommended recovery method) Recover to a custom size partition Recover without changing the internal storage drive partitions

For more information on these options, see Recovering the Internal Storage Drive on page 61.
NOTE

When you restore your system, only the operating system files, applications, and drivers originally shipped with the computer are restored. Any files that you created are not restored during this process. Be sure to separately save the files you have created to external media using Windows Backup or another backup program. For more information, see Backing up your work on page 103.

To recover your internal storage drive from recovery DVDs/media: 1 2 Shut down and turn off your computer. Do one of the following: 3 If your recovery files are on DVDs, insert the first recovery DVD into your optical disc drive. If your recovery files are on a USB flash drive, connect the USB flash drive to your computer.

Turn on your computer. When the initial screen displays, press F12. The boot menu displays. Using the arrow keys, select the DVD option or the USB Flash option, depending on which type of media you are using, and then press Enter. A warning screen appears, stating that when the recovery is executed all data on your internal storage drive will be deleted and rewritten. Click Yes to continue. When the Toshiba Recovery Wizard opens and the Selecting a Process screen displays, select Recovery of Factory Default Software and then click Next.

74
7

Getting Started

Erasing the Internal Storage Drive

Select one of the following options: Recover to out-of-box state (recommended recovery method) If you want to recover the original factory image Recover without changing the hard drive partitions If you want to recover the C: partition only, leaving other partitions you have created intact Recover to a custom size partitionIf you want to recover the C: drive to its out-of-box state and specify a custom size for the C: drive. Note: This option deletes all other partitions from the drive.

Follow the on-screen instructions to complete the recovery process. When the process is complete, a message displays indicating that the drive has been recovered.

Press any key on the keyboard to restart the computer.

Erasing the Internal Storage Drive

Erasing the internal storage drive will delete all data on the drive, including the partitions. Be sure to create recovery DVDs/media and back up your data to external media before erasing the internal storage drive.

NOTE

If you want to restore the internal storage drive, use one of the recovery options instead of erasing the drive. For more information, see Recovering the Internal Storage Drive on page 61.

To delete all data and partitions from the internal storage drive: 1 Access the Toshiba Recovery Wizard on your internal storage drive or on your recovery DVDs/media. To access the Recovery Wizard on your internal storage drive: Press and hold the 0 (zero) key while powering on the computer. Read the Warning screen that displays and then click Yes to continue.

Getting Started

Erasing the Internal Storage Drive

75

To access the Recovery Wizard on your recovery DVDs/media: Turn off your computer. Insert the first recovery DVD into your optical disc drive or connect the USB flash drive containing your recovery files to your computer, and then power on the computer. When the initial screen displays, press F12. Using the arrow keys, select the DVD or USB Flash option on the boot menu, depending on which type of media you are using, and then press Enter. Select Toshiba Recovery Wizard, and then click Next.

2 3

Select Erase the hard disk and then click Next. Choose one of the following options on the Erase the hard disk screen: Delete all data and partitions from the hard diskThis option deletes all of the data on the internal storage drive without overwriting the drive. Delete all partitions and overwrite all sectors on the hard diskThis option deletes all data and then overwrites the entire internal storage drive for security purposes. This process may take several hours, depending on the size of your internal storage drive.

(Sample Image) Erase the hard disk screen

76
4

Getting Started

Checking the internal storage drive operating status

Click Next. A confirmation message displays reminding you that all data on the internal storage drive will be lost. Be sure you have saved your work to external media (see Backing up your work on page 103) and created recovery DVDs/media (see Creating recovery DVDs/media on page 70) before proceeding. 5 Click Next to begin erasing the internal storage drive. When the process is complete, a message displays, indicating that the internal storage drive has been erased. 6 Press any key on the keyboard to restart the computer.

Checking the internal storage drive operating status

After restoring your internal storage drive, you can check its status as follows: 1 2 3 4 5 Click Start. Right-click Computer. Select Manage. Click Disk Management. Highlight the internal storage drive in the Volume list to display its status in the lower portion of the screen.

Installing drivers and applications

The Toshiba Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: 1 2 3 4 5 Click Start, All Programs, My Toshiba, and then TOSHIBA Application Installer. Click Next. Click the item you want to install. Click Install. Follow the on-screen prompts to complete the installation process.

Getting Started

Using the Toshiba Dual Pointing Device

77

Using the Toshiba Dual Pointing Device

(Available on certain models.)

Accupoint II pointing device Accupoint II primary button TouchPad TouchPad primary button TouchPad secondary button Accupoint II secondary button

(Sample Illustration) Toshiba Dual Pointing Device buttons Accupoint II pointing deviceMoves the cursor and selects items on the screen. To move the cursor, gently push the pointing device in the direction you want the cursor to move. Pushing harder on the pointing device moves the cursor faster. Primary buttonPerforms the same function as the left button on a mouse. When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary button. To double-click, press the primary button twice in rapid succession. Secondary buttonPerforms the same function as the right button on a mouse. For more information, see Disabling or enabling the Toshiba Dual Pointing Device on page 222.

Using the TouchPad

The TouchPad, the small, rectangular area located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you would like to move the cursor: To move the cursor to the top of the page, push your finger forward on the TouchPad. To move the cursor to the bottom of the page, drag your finger toward yourself.

78

NOTE

Getting Started

Using the TouchPad

To move the cursor to the right side of the page, slide your finger across the TouchPad from left to right. To move it to the left side, slide your finger from right to left. Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction.

Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons.

Scrolling with the TouchPad

There are two active regions on the TouchPad that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the TouchPad. To scroll horizontally, run your finger along the bottom edge of the TouchPad. This feature can be disabled or changed in the Mouse Properties dialog box.

Control buttons
When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click, press the primary button twice in rapid succession. The primary button usually corresponds to the left mouse button. The function of the secondary (right-hand) button depends on the program you are using. It usually corresponds to the right mouse button (right-clicking). Check your programs documentation to determine whether it uses the right mouse button.

Disabling or enabling the TouchPad

The TouchPad is enabled by default. To enable/disable the TouchPad, press Fn + F9. For more information, see Disabling or enabling the Toshiba Dual Pointing Device on page 222.
NOTE

Alternately, you can disable only the tapping feature. If you disable tapping only, you can still use the TouchPads control buttons and move the pointer by sliding your finger on the TouchPad. To disable tapping only, use the Mouse Properties option in the Windows Control Panel.

Getting Started

Using external display devices

79

Using external display devices

Your computer comes with a built-in display, but you can also connect the following types of external display devices to the video ports described below: An external monitor or projector via the RGB (monitor) port An external monitor via the Mini DisplayPort* (DisplayPort-compatible monitor or DisplayPort adaptors required)

RGB (Monitor) port

(Sample Illustration) Video port on back of system

Mini DisplayPortTM* *Available on certain models

(Sample Illustration) Video port on left side of system

Connecting an external monitor or projector

You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1 2 3 4 Read the directions that came with the monitor to see if you first need to install new software. Connect the monitors video cable to the RGB (monitor) port on the back of the computer. Connect the devices power cable to a live electrical outlet. Turn on the external device. Your computer will automatically detect the external display device.
NOTE

In the future you can change the display settings by pressing Fn + F5, or by configuring the display properties settings.

80

Getting Started

Using external display devices

Directing the display output when you turn on the computer

Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously.
NOTE

Some modes are only available with the appropriate device attached and turned on.

The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 2 Press Fn and F5 simultaneously. While holding down Fn, press F5 repeatedly until the setting you want takes effect. Briefly pause each time you press the F5 key to allow time for the display to change. This hot key cycles through the settings in the following order (the last two options are available if an external monitor is connected): Built-in display only Built-in display and external monitor simultaneously External monitor only TV (or other external video device) only External monitor and TV simultaneously Built-in display and TV (or other external video device) simultaneously Built-in display and external monitor (extended desktop) Built-in display and TV (extended desktop) External monitor and TV (extended desktop) Swap-Switch primary display between internal display and external monitor when using extended desktop

(Sample Image) Display options window

Getting Started

Using an external keyboard

3 Release the Fn key.

81

Adjusting the quality of the external display

To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.

Using an external keyboard

If you prefer to use an external keyboard, you can attach one to your computer. The computers USB ports support most USB-compatible keyboards.

Using a mouse
You may want to use a mouse instead of the computers built-in TouchPad. You can use a USB-compatible mouse.

Connecting a printer
NOTE

Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly. Read the documentation that came with your printer. Follow the manufacturers instructions when connecting a printer.

You can connect a USB-compatible printer to your computer through the USB ports. To determine if the printer is USB-compatible, check its documentation. To make the connection, you need a suitable USB cable which may come with your printer. If a USB cable was not included with your printer, you can purchase one from a computer or electronics store. If your printer supports Plug and Play, your computer may automatically recognize the printer; the printer is then ready for use. Refer to your printer documentation for further instructions. TECHNICAL NOTE: To determine if your printer supports Plug and Play, check its documentation. If your printer does not support Plug and Play, you can set up the printer as described in Setting up a printer on page 82.

82
1 2

Getting Started

Turning off the computer

To connect a printer to your computer: Connect the printer cable to the printer and then connect the other end to one of the computers USB ports. Plug the printers power cable into a live AC outlet.

Setting up a printer
NOTE

Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure.

If your printer does not support Plug and Play, follow these steps to set it up for the first time. You only need to set up the printer once. 1 Click Start, Control Panel, Hardware and Sound, and then under Devices and Printers, click Add a printer. The Add Printer Wizard appears.

(Sample Image) Add Printer Wizard 2 Follow the on-screen instructions to set up your printer.

Turning off the computer

Pressing the power button before shutting down the Windows operating system could cause you to lose your work. Make sure the system indicator panels storage drive light and the drive in-use light are off. If you turn off the power while a disk/disc is being accessed, you may lose data or damage the disk/disc and/or drive.

Getting Started

Turning off the computer

83

It is a good idea to turn off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.

Options for turning off the computer

Depending on the operating system installed, you have more than one option available for turning off the computer: Shut down, Hibernate, and Sleep. Each option has its advantages. Use the Shut down or Hibernate command if you will not be using the computer for several days or if you must turn off your computer. You must turn off your computer in order to upgrade your computers internal hardware (such as memory). TECHNICAL NOTE: Before using the Shut down option to turn off your computer, save your files and make sure all disk/disc activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again. Use the Sleep command to save your work, system settings, and current state of the desktop to memory, so that when you turn on the computer again, you will quickly and automatically return to where you left off.

Hibernation mode
Hibernation mode shuts the computer down completely, but it first saves the current state of the computer to the internal storage drive. Since Hibernation mode does not require power to maintain the saved information, system settings are retained indefinitely. Factors to consider when choosing Hibernation: While in Hibernation mode, the computer uses no main battery power. Because the state of the system is stored to the internal storage drive, no data is lost if the main battery discharges. Restarting from Hibernation takes less time and consumes less main battery power than restarting after turning off the computer using the Shut down command.

84

Getting Started

Turning off the computer

Restarting from Hibernation takes a little more time and consumes more main battery power than restarting from Sleep. When starting up again, the computer returns to the state in which you left it, including all open programs and files you were using.

For information on how to use and configure Hibernation mode see Using and configuring Hibernation mode on page 87.

Sleep mode
The Sleep command places the computer into a power-saving mode. Sleep saves the current state of the computer to memory so that, when you restart the computer, you can continue working from where you left off.
NOTE

After your computer sleeps for an extended period of time, the Windows operating system may save any open documents and programs to your internal storage drive, and then shuts down the computer.

Factors to consider when choosing Sleep: While in Sleep mode, the computer uses some main battery power. Because the state of the system is stored in memory, you will lose data if the main battery discharges completely while the computer is in Sleep mode. Restarting from Sleep takes less time and consumes less main battery power than restarting after turning off the computer using the Hibernation or Shut down commands. When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. If the battery charge becomes critically low, the computer will try to enter Hibernation mode. If you power down using the Sleep command and the main battery discharges fully, your unsaved information will be lost. Be sure to save your work first. For information on using Sleep, see Using and configuring Sleep mode on page 90.

Getting Started

Turning off the computer

85

Using the Shut down command

The Shut down command completely shuts down the computer without saving your work or the current state of the computer. This command closes all open programs, shuts down the operating system, and then turns off your computer. To turn off your computer using the Shut down command: 1 Click Start.

Start button

Shut down button

(Sample Image) Shut down button 2 Click the Shut down button in the lower-right corner of the Start menu. The computer closes all open programs, shuts down the operating system, and then turns off.

Turning off the computer more quickly

You can also turn off the computer by pressing the power button. To use this method, you first need to activate it using the Power Options feature. By default, pressing your computers power button puts the computer into Sleep mode. 1 Click Start, Control Panel, System and Security, and then Power Options. The Power Options window appears.

86
2

Getting Started

Turning off the computer

Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears.

(Sample Image) Edit Plan Settings screen 3 Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. 4 Double-click Power buttons and lid to display the actions that you can configure.

(Sample Image) Advanced settings tab of Power Options screen 5 Select the options you want from the drop-down lists.

Getting Started

Turning off the computer

NOTE

87

These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. Lid close action Set this option to Shut down if you want the computer to shut down when you close the display panel. Power button action Set this option to Shut down if you want the computer to shut down when you press the power button.

6 7

Click Apply. Click OK.

Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set.

Restarting your computer

To start the computer up again, press the power button until the ON/OFF light glows green. If you turn off the computer by closing the display panel, you can start it again by opening the display panel.

Using and configuring Hibernation mode

To turn off the computer using the Hibernation command: 1 Click Start, and then click the arrow next to the Shut down button in the lower-right corner of the Start menu.

Hibernate

Start button

Arrow

(Sample Image) Shut down menu

88
2

Getting Started

Turning off the computer

Click Hibernate in the pop-up menu. The computer saves the state of all open programs and files, turns off the display, and then turns off.

Configuring Hibernation mode options

You can place the computer into Hibernation mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Hibernation mode. To use any of these methods, you first need to enable them using the Power Options feature. 1 Click Start, Control Panel, System and Security, and then Power Options. The Power Options window appears. 2 Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears.

(Sample Image) Edit Plan Settings screen 3 Click Change advanced power settings. The Advanced settings tab of the Power Options window appears.

Getting Started

Turning off the computer

4

89

Double-click Power buttons and lid to display the actions that you can configure.

(Sample Image) Advanced settings tab of Power Options screen 5

NOTE

Select Hibernate for the options you want. These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. Lid close action Set this option to Hibernate if you want the computer to go into Hibernation mode when you close the display panel. Power button action Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button.

6 7

Click Apply. Click OK.

Once the computer is configured, you can place it into Hibernation mode by either pressing the power button or closing the display panel, depending on the Hibernation options set.

90

Getting Started

Turning off the computer

Starting again from Hibernation mode

To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows green. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.

Using and configuring Sleep mode

To turn off the computer using the Sleep command: 1 Click Start, and then click the arrow next to the Shut down button in the lower-right corner of the Start menu.

Sleep

Start button

Arrow

(Sample Image) Shut down menu 2 Click Sleep in the pop-up menu. The computer saves the status of all open programs and files to the memory, turns off the display, and enters into a low-power mode. The ON/OFF light blinks amber indicating the computer is in Sleep mode.

Configuring Sleep mode options

You can place the computer into Sleep mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Sleep mode.

Getting Started

Turning off the computer

91

To use any of these methods, you first need to enable them using the Power Options feature. 1 Click Start, Control Panel, System and Security, and then Power Options. The Power Options window appears. 2 Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears.

(Sample Image) Edit Plan Settings screen 3 To change the amount of time after which the computer enters Sleep mode: Under Put the computer to sleep, select the desired amount of time in both the On battery and Plugged in categories. To disable the computer from automatically entering Sleep mode, select Never.

Click Change advanced power settings. The Advanced settings tab of the Power Options window appears.

92
5

Getting Started

Turning off the computer

Double-click Power buttons and lid to display the actions that you can configure.

(Sample Image) Advanced settings tab of Power Options screen 6

NOTE

Select Sleep for the options you want. These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. Lid close action Set this option to Sleep if you want the computer to go into Sleep mode when you close the display panel. Power button action Set this option to Sleep if you want the computer to go into Sleep mode when you press the power button.

7 8

Click Apply. Click OK.

Once the computer is configured, you can place it into Sleep mode by either pressing the power button or closing the display panel, depending on the Sleep options set.

Getting Started

Customizing your computers settings

93

Starting again from Sleep mode

To start up the computer from Sleep mode, press the power button until the ON/OFF light glows green. The computer returns to the screen(s) you were using. If you place the computer in Sleep mode by closing the display panel, you can start it again by opening the display panel.

Closing the display panel

After you have turned off the computer, close the display panel to keep dust and dirt out of the computer.

Customizing your computers settings

There are several ways in which you can customize your computer to suit your particular requirements. Refer to your operating system documentation or Help and Support for details. You may also wish to customize your power usage settings. For more information, see Power Plans on page 120. There are additional custom settings you can choose. See Utilities on page 142.

Caring for your computer

This section gives tips on cleaning and moving your computer. For information about taking care of your computers battery, see Taking care of your battery on page 125.
NOTE

Please handle your computer carefully to avoid scratching or damaging the surface.

Cleaning the computer

Keep liquids, including cleaning fluid, out of the computers keyboard, speaker, and other openings. Never spray cleaner directly onto the computer and/or display. Never use harsh or caustic chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth.

94

Getting Started

Caring for your computer

Moving the computer

Before moving your computer, even across the room, make sure all drive activity has ended (the internal storage drive and optical disc drive indicator lights stop glowing) and all external peripheral cables are disconnected. Do not pick up the computer by its display panel or by the back (where the ports are located). Doing so could damage the system.

Using a computer lock

You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com.

(Sample Illustration) Computer lock cable To secure the computer: 1 Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. 2 3 Pass the locking end through the loop. Insert the cables locking end into the security lock slot on your computer, then engage the locking device. The computer is now securely locked.

(Sample Illustration) Attaching security lock cable

Chapter 2

Learning the Basics

This chapter gives some computing tips and provides important information about basic features.

Computing tips
Save your work frequently. Your work stays in the computers temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved. See Saving your work on page 100 for further information. HINT: Some programs have an automatic save feature that can be activated. This feature saves your file to the internal storage drive at preset intervals. See your software documentation for details. Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy. For more information, see Data and system configuration backup in the Windows operating system on page 201.

95

96

Learning the Basics

Using the keyboard

Use Error-checking and Disk Defragmenter regularly to check and optimize disk space and improve performance. Scan all new files for viruses. This precaution is especially important for files you receive via diskette, email, or download from the Internet. Take frequent breaks to avoid repetitive-motion injuries and eyestrain. Do not turn off the computer if a drive indicator light indicates a drive is active. Turning off the computer while it is reading from or writing to a disk may damage the disk, the drive, or both.

NOTE

The Windows operating system records information, such as your desktop setup, during its shutdown procedure. If you do not let the Windows operating system shut down normally, details such as new icon positions may be lost.

Using the keyboard

Your computers keyboard contains character keys, control keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard.

(Sample Illustration) Keyboard

Character keys
Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page. The lowercase letter l (el) and the number 1 are not interchangeable.

Learning the Basics

Using the keyboard

The uppercase letter O and the number 0 are not interchangeable.

97

Ctrl, Fn, and Alt keys

(Sample Illustration) Ctrl, Fn, and Alt keys The Ctrl, Fn, and Alt keys do different things depending on the program you are using. For more information, see your program documentation.

Function keys
The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard.

(Sample Illustration) Function keys

F1 through F12 are called function keys because they execute

programmed functions when pressed. Used in combination with the

Fn key, function keys marked with icons execute specific functions on the computer. For example, Fn + F9 turns the TouchPad

ON/OFF. For more information, see Hot key functions on page 213.

Special Windows keys

Windows key Application key

(Sample Illustration) Special Windows keys Your computers keyboard has one key and one button that have special functions in Windows: Windows keyOpens the Start menu Application keyHas a similar function as the secondary mouse button

98

Learning the Basics

Starting a program

Starting a program
The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use the Start menu or Windows Explorer. If you prefer to open the program first, you have four options. You can: Double-click the icon for the program on your desktop Use the Start menu Use Windows Explorer to locate the program file Use the Search programs and files field in the Start menu

The next three sections explain how to start a program from the Start menu, Windows Explorer, and the Search programs and files field.

Starting a program from the Start menu

When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the Windows WordPad program as an example: 1 Click Start, and then All Programs. The Windows operating system displays the All Programs menu, which lists programs and program groups. If your program is listed, go to step 3, otherwise, continue with step 2.
NOTE

If you pause with your mouse on All Programs, it will open it up. You may need to scroll up or down to see the complete list. Click the program group, in this example, Accessories. The Accessories menu is displayed. Click the program, in this example, WordPad. WordPad opens. To close the program, click the Close button in the upper-right corner of the programs window.

2 3

Learning the Basics

Starting a program

99

Starting a program from Windows Explorer

If a program is not listed in the All Programs menu, you can start it from Windows Explorer. Windows Explorer gives you a view of your computers contents as a hierarchy or tree. You can easily see the contents of each drive and folder on your computer. To use this method, you should know the file name and location of the programs executable file (this file ends with .exe). This example opens WordPad using Windows Explorer.
NOTE

If you pause with your mouse on All Programs, it will open it up. You may need to scroll up or down to see the complete list. Click the Windows Explorer icon on the taskbar. In the left part of the window, double-click Computer to expand the window. In the left part of the window, click the line that ends in (C:). In the right part of the window, double-click the folder containing the program, in this case Program Files. Windows Explorer shows the contents of the Program Files folder on the right side of the window.

1 2 3 4

5 6

In the right part of the window, double-click Windows NT. In the right part of the window, double-click Accessories. Windows Explorer shows the contents of the Accessories folder on the right side of the window.

In the right part of the window, double-click wordpad. The operating system opens WordPad. To close the program, click the Close button in the upper-right corner of the programs window.

100

Learning the Basics

Saving your work

Starting a program using the Search programs and files field

This example uses the Start menus Search programs and files field to start WordPad: 1 Click Start to display the Start menu. The Search programs and files field appears at the bottom of the Start menu.

Search programs and files field

(Sample Image) Search programs and files field in Start menu 2 Start typing the programs name (wordpad) in the Search programs and files field. As you type, all matching files and programs are displayed in a separate window. 3 In the search results window, click WordPad under Programs.

Saving your work

Before you turn off the computer using the Shut down command, save your work on the internal storage drive, diskette, flash media, or optical disc. This is one of the most important rules of computing. When you turn off the computer using the Sleep or Hibernate commands, your work should be there when you resume. Many programs offer a feature that saves documents at regular intervals. Check your programs documentation to see if it has an automatic save feature.

Learning the Basics

Saving your work

101

Saving files
1 Click on the arrow in the upper-left corner of your Windows-based application to display the drop-down menu, and then click Save. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box. Use this dialog box to specify where to store the document and to give it a file name.

(Sample Image) Save As dialog box 2 3 Choose the drive and folder where you want your file to be stored. Type a file name, then click Save.

File names
The Windows operating system supports long file names that can contain up to 260 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters, numbers, and other characters on the keyboard, except for these characters: \ / ? : * " > < |. File names are not case-sensitive.

102

Learning the Basics

Printing your work

Using a file extension

Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft Word saves files with a .doc/.docx extension. Any file name with an extension of .doc/.docx is assumed to be a Microsoft Word file. Creating your own extension is usually unwise, since the program is unlikely to recognize a strange extension and may refuse to handle your file correctly. TECHNICAL NOTE: By default, the Windows operating system does not show file extensions. For information on showing or hiding file extensions, see your Windows online Help.

Printing your work

Ensure the operating system is set up for your printer as described in Setting up a printer on page 82. HINT: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the Windows operating system to run with the additional printer(s). To print a file: 1 If your printer is not on, turn it on now. 2 Click on the arrow in the upper-left corner of your Windows-based application to display the drop-down menu, and then click Print. The program displays a Print dialog box.

(Sample Image) Print dialog box

Learning the Basics

Backing up your work

3 4

103

Specify the print parameters. For example, the range of pages and number of copies to print. Click Print.

Backing up your work

Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, external storage media, or to a network, if available. To back up several files at one time, use the Microsoft Windows Backup program preinstalled on the computers internal storage drive. Also see Backing up your data or your entire computer with the Windows operating system on page 203. HINT: Backing up all the files on your internal storage drive may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a high-capacity backup system, such as an external hard drive. Small files can be backed up on diskettes if an optional external diskette drive is available.

Restoring your work

To restore information from your backup media to your internal storage drive, use the Restore option in the Windows Backup and Restore program. Look in the online Help or your operating system documentation for information on restoring files.

(Sample Image) Backup and Restore screen

104

Learning the Basics

Using the optical disc drive

TECHNICAL NOTE: When restoring files, the backup program prompts you if you try to overwrite a file that already exists on the internal storage drive. Make sure the backup version is the one you want before overwriting the existing file.

Using the optical disc drive

Optical storage is a popular medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that were not available on previous video platforms. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus. TECHNICAL NOTE: Your optical disc drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times. On the fourth change, the region will be locked in. That is, the drive will only play DVDs from that last region. Note that changing from region 1 to region 2 and back to region 1 is counted as two changes.

NOTE

For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power.

NOTE

When viewing DVD movies use the DVD Player software that came with your computer.

optical disc drive components

The optical disc drive is located on the side of the computer. Your optical disc drive may look like this:

Drive in-use indicator light Eject button Manual eject hole

(Sample Illustration) Optical disc drive

Learning the Basics

Using the optical disc drive

105

Drive in-use indicator lightIndicates when the drive is in use. Eject buttonPress to release the disc tray. Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. Manual eject holeUse if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.

Media control buttons

The media control buttons located on the system control panel above the keyboard let you change the system volume when the computer is on.
TOSHIBA Presentation button Volume increase and decrease buttons

(Sample Illustration) Media control buttons The TOSHIBA Presentation button allows the user to switch between two display options; built-in display and built-in display/external monitor. The Volume increase and decrease buttons allow you to increase/decrease the volume of the sound coming from the computer.

106

Learning the Basics

Using the optical disc drive

If your computer comes with a solid state drive (SSD) (available on certain models), under certain unusual conditions of prolonged non-use and/or exposure to high temperatures, your SSD may be vulnerable to data retention errors.

Inserting an optical disc

To insert an optical disc into the drive: 1 2 3 4 Make sure the computer is turned on. The drive will not open if the computers power is off. Make sure the drives in-use indicator light is off. Press the drives eject button. The disc tray slides partially out of the drive. Grasp the tray and pull it fully open.

(Sample Illustration) Drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in Caring for optical discs on page 110.

Learning the Basics

Using the optical disc drive

6 Place the disc carefully in the disc tray, label side up.

107

(Sample Illustration) Positioning the disc in the drive 7 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data. 8 Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to use the disc.

Playing an audio CD
Insert an audio CD and close the disc tray. If the computer is turned on, the default player opens. To play the CD or to pause, click the Play/pause button. To stop the CD, click the Stop button.

108

Learning the Basics

Using the optical disc drive

Before putting on headphones to listen, turn the volume down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.

Playing optical media

If you insert an optical disc into the optical disc drive and the AutoRun feature does not automatically start your disc, try launching the optical disc manually. To do this, follow these steps: 1 2 Click Start, and then Computer. Double-click the optical disc drive icon. The drive will run the optical disc. If your disc does not run using this method, try using an application that is associated with the media on the disc. For example, if it is a music CD, open Windows Media Player and use it to select and then play the CD. For other types of media, use the associated software to open the files on the disc.

Recording optical media

Depending on the configuration, your computer may come with an optical disc drive that allows you to: Play pre-recorded and recorded optical media. Read/write data and multi-media files to recordable optical media.

For more information regarding supported optical media formats please refer to your computers detailed specifications at pcsupport.toshiba.com.

Learning the Basics

Using the optical disc drive

NOTE

109

Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical disc drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders. Additionally, certain optical media recorded on your optical disc drive may not play back or operate properly on other computers or optical media players. These problems are not due to any defect in your Toshiba computer or optical disc drive. Please refer to your computer's product specification for listing of specific format compatibilities. Copy protection technology may also prevent or limit recording or viewing of certain optical media.

For details on how to use the software, please refer to the respective Online Help menus.

Removing a disc with the computer on

To remove an optical disc with the computer turned on: 1 Press the eject button on the drive. Do not press the eject button while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive. Also, if the disc is still spinning when you open the disc tray, wait for it to stop spinning before you remove it. 2 3 Pull the tray out until it is fully open, remove the disc, and place it in its protective cover. Gently press the tray in to close it.

Removing a disc with the computer off

To remove a disc with the computer turned off: 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.

110
2 3

Learning the Basics

Toshibas online resources

Pull the tray out until it is fully open, remove the disc, and place it in its protective cover. Gently press the tray in to close it.

Caring for optical discs

Store your discs in their original containers to protect them from scratches and keep them clean. Do not bend a disc or place heavy objects on top of it. Do not apply a label to, or otherwise mar the surface of, a disc. Hold a disc by its outside edge. Fingerprints on the surface can prevent the optical disc drive from reading the data properly. Do not expose discs to direct sunlight or extreme heat or cold. To clean a disc that is dirty, wipe it with a clean, dry cloth. The most efficient method to clean it is to start from the center of the disc and wipe toward the outward edge (not in a circle). If necessary, moisten the cloth with water or a neutral cleaner (not benzine or rubbing alcohol). Let the disc dry completely before inserting it in the drive.

Toshibas online resources

Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades. For more information, see Contacting Toshiba on page 206.

Chapter 3

Mobile Computing
This chapter covers all aspects of using your computer while traveling.

Toshibas energy-saver design

Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.

111

112

Mobile Computing

Running the computer on battery power

Your computer contains Toshiba EasyGuard. The Toshiba EasyGuard* technology is made up of four foundational elements that incorporate hardware and software innovations into various Toshiba computers that address the most common security, reliability and connectivity issues faced by computer users: EasyGuard Protect and Fixto fortify vital information and vulnerable components against the stress and hazards mobile computers face every day. EasyGuard Secureto defend your data and your computer against loss, theft or viral attack. EasyGuard Connectto help users establish a reliable wired or wireless connection effortlessly and quickly. EasyGuard Optimizeto enable users to customize system settings to be more productive.

*Toshiba EasyGuard technology comprises a number of features some of which may or may not be available on a particular Toshiba computer depending on the model selected. See easyguard.toshiba.com for detailed information.

Running the computer on battery power

The computer contains a removable Lithium-Ion (Li-Ion) battery that provides power when you are away from an AC outlet. You can recharge it many times.

Battery Notice
Battery life rating is for comparison purposes only, and does not indicate the battery life that will be obtained by any individual user. Actual battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. The battery life rating is only achieved on the select models and configurations tested by Toshiba under the specific test settings at the time of publication and is not an estimate of a systems battery life under any conditions other than the specific test settings. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power. After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see the accessories information included with your computer or visit the Toshiba Web site at

Mobile Computing

Running the computer on battery power

113

accessories.toshiba.com. Use only batteries designed to work with your Toshiba computer. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month. The Lithium-Ion battery has no memory effect so it is not necessary to let the battery fully discharge each time. However, for better accuracy of the battery meter, it is helpful to fully discharge the battery periodically. Please see Maintaining your battery on page 126 for procedures. If the computer is continuously operated on AC power, either through an AC adaptor or a port replicator (if applicable to your system), for an extended period (more than a month), the battery may fail to retain a charge. This may shorten the life of the battery, and may cause the battery meter to be inaccurate.
NOTE

For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power. For more information about Windows power plans, see Power Plans on page 120.

The computer also has an internal real-time-clock (RTC) battery. The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information. It maintains this information for up to a month while the computer is turned off. TECHNICAL NOTE: Depending on your system, the RTC battery may only charge while the computer is turned on.

Power management
Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes. Changes to these settings may result in system performance or stability issues. Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshibas Customer Support Center.

114

Mobile Computing

Charging batteries

Using additional batteries

In addition to the main battery, you may also have an optional secondary battery (not included with your computer). If you travel and need to work for many hours without an AC power source, you may purchase a battery module for use in the computer, or carry additional charged battery packs with you. You can then replace a discharged battery and continue working. For more information on batteries and accessories, see accessories.toshiba.com.

Charging batteries
The battery needs to be charged before you can use it to power the computer. Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshibas Web site at accessories.toshiba.com.

NOTE

Battery charge time may vary depending on the applications, power management settings, and features used.

Charging the main battery

To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: The recharging of the battery cannot occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices. Your computer's Power Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.

Mobile Computing

Charging batteries

115

The battery may not start charging immediately under the following conditions: The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius). The battery is almost completely discharged. Leave the power connected and the battery should begin charging after a few minutes. HINT: Once the battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely. Doing this extends battery life and helps ensure accurate monitoring of battery capacity.

Charging the RTC battery

Your computer has an internal real-time clock (RTC) battery. The RTC battery powers the System Time Clock and BIOS memory used to store your computers configuration settings. When fully charged, it maintains this information for up to a month when the computer is powered off. The RTC battery may have become completely discharged while your computer was shipped, resulting in a CMOS error message during startup. The error message may vary by computer model.
NOTE

Depending on your system, the RTC battery may only charge while the computer is turned on.

To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours.
NOTE

It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.

116

Mobile Computing

Monitoring main battery power

The computer can be used while the RTC battery is being charged, although the charging status of the RTC battery cannot be monitored.

Monitoring main battery power

The computers main battery light gives you an indication of the main batterys current charge. Glows amber while the main battery is being charged (AC adaptor connected). Glows green when the main battery is fully charged. Is unlit when the battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power management settings, applications and features used. Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor. If the AC power light flashes amber during charging, either a battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the battery pack. See Changing the main battery on page 122 for information on replacing the main battery.

NOTE

NOTE

Mobile Computing

Monitoring main battery power

HINT: Be careful not to confuse the battery light ( ON/OFF light ( ).

117

) with the

When the ON/OFF light flashes amber, it indicates that the system is suspended (using the Windows operating system Sleep command).

Power button

System indicator lights

AC power light ON/OFF light Battery light Internal storage drive light Memory card reader light

(Sample Illustration) Power and battery light locations

Determining remaining battery power

NOTE

Wait a few moments after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the batterys remaining capacity and perform its calculations.

118

Mobile Computing

Monitoring main battery power

Move the pointer over the power icon in the notification area, see Finding your way around the desktop on page 130 for more information on the notification area. A pop-up message displays the remaining battery power as a percentage. With repeated discharges and recharges, the batterys capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged. TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.

What to do when the main battery runs low

When the main battery runs low you can: Plug the computer into an external power source and recharge the main battery Place the computer into Hibernation mode and replace the main battery with a charged spare (not included with your computer) Save your work and turn off the computer

If you do not manage to do any of these things before the main battery completely runs out of power, the computer automatically enters Hibernation mode and turns itself off. Hibernation mode keeps track of where you were, so that when you turn on the power again, you can continue where you left off. If you have Hibernation mode enabled (the default), the computer copies the details of your open programs and files to the internal storage drive before shutting down. For more information on using Hibernation, see Hibernation mode on page 83.

Setting battery notifications

You can set two notifications. Each notification can be set to alert you when a specified percentage of remaining battery power has been reached. You can also set the computer to enter Sleep mode or Hibernation mode or to completely power down when the notification goes off.

Mobile Computing

Monitoring main battery power

To change the default notification settings: 1

119

Click Start, Control Panel, System and Security, and then Power Options. The Power Options window appears. Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. Click Change advanced power settings. The Advanced settings tab of the Power Options window appears.

Double-click Battery to display the battery options.

(Sample Image) Advanced settings tab of Power Options screen 5 Configure the alarm settings to suit your needs.

Conserving battery power

How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as: How the computer is configured How much you use the internal storage drive, optical disc drive, diskette drives, or other optional devices Where you are working, since operating time decreases at low temperatures

120

Mobile Computing

Monitoring main battery power

There are various ways in which you can conserve power and extend the operating time of your battery: Enable Sleep or Hibernation, which saves power when you turn off the computer and turn it back on again Use the Windows power-saving option plans

These power-saving options control the way in which the computer is configured. By using them, you can increase the length of time you can use the computer before you need to recharge the battery. Microsoft has combined these options into preset Power Plans. Using one of these power plans lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs. The following sections describe how to choose a Power Plan and discuss each power-saving option.

Power Plans
You can choose a predefined Power Plan or select your own combination of power options. To do this: 1 Click Start, Control Panel, System and Security, and then Power Options. The Windows Power Options window appears.

(Sample Image) Windows Power Options window 2 3 Select an appropriate plan for your work environment or create your own custom plan. Click Create a power plan in the left pane to set up a new plan.

Mobile Computing

Monitoring main battery power

NOTE

121

To edit a plan or to edit advanced settings, continue to the following steps. Click Change plan settings to choose the plan you want to edit. This screen allows you to change basic settings. Click Change advanced power settings to access settings for battery notification levels, internal storage drive power save time, etc. You can click on the plus signs to expand each item and to see what settings are available for each item.

Click OK to save the plan changes you have performed.

By default the two power plans eco and Balanced are satisfactory for most people and do not need to be edited. The eco plan is the best used for maximum battery time. The Balanced plan is a compromise between battery time and performance.

Using a hot key to set the Power Plan

You may use a hot key to set the Power Plan. To set the Power Plan: 1 Press Fn and F2 simultaneously to display the Power Plan hot key card.

(Sample Image) Power Plan hot key card 2 While continuing to press Fn, press F2 until you select the desired Power Plan. The Power Plan options are: eco and Balanced. 3 Release the Fn key. The hot key card disappears. You are now in the selected mode.

122

Mobile Computing

Using the TOSHIBA eco power plan

Using the TOSHIBA eco power plan

This computer is equipped with the Toshiba eco power plan. Operating the computer with this power plan enabled reduces electrical power consumption by slightly lowering system performance. For example, when this power plan is enabled, the brightness of the display is reduced and the interval before Sleep mode takes effect is shortened. To enable or disable the eco power plan, press the eco Utility button.

eco Utility button

(Sample Illustration) Locating the eco Utility button The Toshiba eco Utility monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To learn how to access the utility, see TOSHIBA eco Utility on page 173. For more information on the Toshiba eco power plan, see the Help file in the TOSHIBA eco Utility window.

Changing the main battery

When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack and computer. Never expose a battery pack to abnormal shock, vibration or pressure. The battery pack's internal protective device could fail, causing it to overheat or ignite, resulting in caustic liquid leakage, or explosion or fire, possibly resulting in death or serious injury.

Mobile Computing

Changing the main battery

123

TECHNICAL NOTE: To avoid losing any data, save your files and then either completely shut down your computer or put it into Hibernation mode before changing the main battery.

Removing the battery from the computer

To remove the battery: 1 2 Save your work. Turn off the computer or place it in Hibernation mode according to the instructions in Using and configuring Hibernation mode on page 87. Unplug and remove any cables connected to the computer, including the AC adaptor. Close the display panel and turn the computer upside down. Slide the battery release lock to the unlocked position.

3 4 5

(Sample Illustration) Unlocking the battery release lock 6 7 Slide the battery release latch to release the battery. Pull the discharged battery out of the computer.

(Sample Illustration) Removing the battery

124

Mobile Computing

Changing the main battery

If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury.

Inserting a charged battery

To insert a battery: 1 2 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position.

(Sample Illustration) Inserting the battery

Mobile Computing

Taking care of your battery

3 Slide the battery release lock to the locked position.

125

(Sample Illustration) Locking the battery release lock 4 5 6 Turn the computer right side up. Reconnect any cables that were removed in step 3 of Removing the battery from the computer on page 123. Restart the computer.

Taking care of your battery

The following sections offer tips on how to take care of your battery and prolong its life.

Safety precautions
If the battery pack produces an odor, overheats or changes color or shape while it is being used or charged, turn off the computers power immediately and disconnect the power cord/cable from the power socket. Carefully remove the battery pack from the computer. Do not try to disassemble a battery pack. Do not overcharge or reverse charge a battery. Overcharging will shorten its life, and reverse charging could damage it. Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to overheat and may cause damage to the battery or the computer. Do not incinerate a spent battery, as this could cause it to explode and release caustic liquid. If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery.

126

Mobile Computing

Taking care of your battery

To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity. Charge the battery only in the computer or in a battery charger designated as an approved option. When you install the battery pack, you should hear a click when it is seated properly. Do not expose the battery pack to fire. The battery pack could explode.

Maintaining your battery

Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: Periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below: 1 2 3 Turn off the computers power. Disconnect the AC adaptor and turn on the computers power. If it does not turn on, go to step 4. Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4. Connect the AC adaptor to the computer and the power cord/cable to a power outlet. The DC-IN or AC powerlight should glow green, and the battery light should glow amber to indicate that the battery pack is being charged. If the DC-IN or AC power-light indicator does not glow, power is not being supplied. Check the connections for the AC adaptor and power cord/cable. Charge the battery pack until the battery light glows green.

If you have extra battery packs, rotate their use. If you will not be using the system for an extended period, more than one month, remove the battery pack.

Mobile Computing

Disposing of used batteries

127

If you are not going to use the computer for more than eight hours, disconnect the AC adaptor. Store spare battery packs in a cool dry place out of direct sunlight.

Disposing of used batteries

The life of a battery pack depends on usage. When the battery pack needs replacing, the main battery light flashes amber shortly after you have fully recharged the battery. You must discard a battery if it becomes damaged. Never attempt to dispose of a battery pack by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven). Heat can cause a battery pack to explode and/or release caustic liquid, both which may possibly cause serious injury. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury.

Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User's Manual. Other battery packs have different voltage and terminal polarities. Use of non-conforming battery packs could generate smoke or cause fire or rupture, possibly resulting in serious injury. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under certain applicable laws and regulations, it may be illegal to dispose of old batteries by placing them in the trash. Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. In addition, Toshibas recycling initiatives include recycling programs, events and consumer promotions. For details, please visit www.laptops.toshiba.com/green.

128

Mobile Computing

Traveling tips
Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle, a program of the Rechargeable Battery Recycling Corporation. For more information and for drop-off locations, visit www.rbrc.org or call 1-800-822-8837. Notice regarding CR coin cell batteries, applicable to California, U.S.A. only: Perchlorate Material - special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Traveling tips
The environmental precautions listed in Selecting a place to work on page 41, also apply while traveling. Never leave your computer on a sunny ledge or in a place where it could get wet or covered in dust. Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information or visit Toshibas Web site at accessories.toshiba.com. TECHNICAL NOTE: When traveling by air, you may be required to pass your computer through airport security equipment. The X-ray equipment will not harm your computer.

NOTE

Before using your computer aboard an aircraft, make sure the Wireless antenna ON/OFF switch is set to the OFF position if your computer has wireless LAN capability.

Chapter 4

Exploring Your Computers Features

In this chapter, you will explore some of the special features of your computer.

Exploring the desktop

The desktop is the launching pad for everything you can do in the Windows operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks. HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system. The differences are not significant and do not indicate any change in the functionality of your system.

129

130

Exploring Your Computers Features

Exploring the desktop

Finding your way around the desktop

Your computers desktop includes several standard features: icons, Start button, taskbar, notification area, and background pattern.

Icons

Start button

Taskbar

Notification area

(Sample Image) Windows operating system desktop

Icons
An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon. You can create a new desktop icon for any folder, file, or program by dragging the elements icon from its location in a window to the desktop area. You may see various icons displayed on your system desktop, for example: Recycle BinHolds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin.

Exploring Your Computers Features

Exploring the desktop

131

TECHNICAL NOTE: If you delete a large number of files or very large files from the internal storage drive, there may be insufficient space available in the Recycle Bin to hold these files. In this case, Windows will prompt you to either permanently delete the file(s) or cancel the deletion. If you delete a file (of any size) from a diskette or flash media, it does not go into the Recycle Bin. The file is permanently deleted. Permanently deleted files cannot be recovered from the Recycle Bin. For more information on the Recycle Bin, see Windows online Help.

NOTE

If you place the pointer over an icon, a popup description of the file contents appears.

Your desktop may contain other icons depending on your configuration. See Windows online Help for more specific information on each icon and how to use it.

Start button
You use the Start button to:
NOTE

Start programs Open documents Adjust system settings Find files Access Windows Help and Support Suspend system activity and shut down the computer Whenever a procedure in this Users Guide instructs you to click Start, it means that you should click the Start button.

Taskbar
Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.

132

Exploring Your Computers Features

Setting up for communications

To make a program or window the currently active one, click the associated taskbar button.

Notification area
The notification area displays icons of tasks or programs that run continuously in the background and displays notifications. To learn more about each task, position the pointer over the icon for a few moments and a short description of the task appears. Typical tasks in the notification area are Current time, Power usage mode, network connectivity status, and speaker volume. To activate a specific task, click the appropriate notification area icon.

Setting up for communications

To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet A way to connect to the ISP (for example modem/ Wi-Fi/LAN, etc.)

Using Wireless LAN connectivity

NOTE

Wireless connectivity and some features may require you to purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited.

Your system may come with an optional wireless LAN module. This is a technology that expands wireless communication beyond networking equipment, and can connect many different kinds of electronic devices without the need for cables. For information on how to set up a wireless connection, refer to your wireless networking device documentation or your network administrator.

Exploring Your Computers Features

Setting up for communications

133

To use your wireless communication, slide the Wireless antenna ON/OFF switch to the ON position.
NOTE

When the Wireless antenna ON/OFF switch is ON, the wireless indicator light will be lit.

For help with common Wi-Fi networking problems, see Wireless networking problems on page 198.

Connecting your computer to a network

You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.

Accessing a network
To access a network: At the office, connect an Ethernet cable to the Network port (RJ45) on your computer. For specific information about connecting to the network, consult your network administrator. Many hotels, airports, and offices offer Wi-Fi access. If your computer has Wi-Fi, ask them for help when connecting to their Wi-Fi network. While you are at home or traveling, you need a dial-up connection. Ask your network administrator for the telephone number of the network.

Setting up the connection

To set up an office connection, consult your network administrator for network settings and additional considerations. To set up a dial-up connection, use the Connect to the Internet wizard: 1 2 3 4 Click Start, Control Panel, Network and Internet, and then under Internet Options, click Connect to the Internet. Click Dial-up. Enter the phone number and account information of your Internet connection. Click Connect and let the program dial the number. The computer connects to the Internet.

134

Exploring Your Computers Features

Setting up for communications

Connecting a modem to a telephone line

(Available on certain models.) Your computer may come with a built-in modem that can be connected to a standard voice-grade telephone line. The modem allows you to: Access the Internet Communicate with your offices local area network (LAN) or larger corporate wide area network (WAN) For specific information about connecting to a LAN or WAN, consult your network administrator. Send a fax directly from your computer Before you can communicate using the modem, you need to connect it to a telephone line. Your computers built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line. 1 Plug one end of a telephone cable (purchased separately) into the modem port on the back of the computer.

(Sample Illustration) Connecting the telephone cable to the modem port 2 Connect the other end to the RJ-11 wall jack.

(Sample Illustration) Connecting to a wall jack

Exploring Your Computers Features

Exploring audio features

NOTE

135

Connect the built-in modem only to ordinary analog phone lines. Never connect the built-in modem to a digital line (ISDN). Never connect the built-in modem to the digital connector on a public telephone or to a digital private branch exchange (PBX). Never connect the built-in modem to a key telephone system for residences or offices. Connection to any communication line other than an analog phone line could cause a computer system failure.

Now you are ready to send a fax or use the modem to connect to an online service or the Internet.

Exploring audio features

You can use your computer to record sounds using the computers internal microphone (available on certain models) or an optional external microphone. You can listen to sound files or audio CDs using the built-in speakers, headphones, or external speakers.

Recording sounds
You may record sounds using the computers internal microphone (available on certain models) or by connecting an optional external microphone.

Using a microphone
1 2 If you want to use an external microphone, connect it to the computer. Click Start, All Programs, Accessories, and then Sound Recorder.

Start Recording/Stop Recording button

(Sample Image) Sound Recorder screen 3 4 5 Click the Start Recording button. Speak normally into the microphone. When you have finished recording, click the Stop Recording button. The Save As dialog box appears.

136
6

Exploring Your Computers Features

Using the Web Camera

To save the file, type a file name, and then click Save.

Using external speakers or headphones

Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. Before putting on headphones to listen, turn the volume down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.

TECHNICAL NOTE: When using amplified speakers, use speakers that require an external power source. Other types of speakers will be inadequate to produce sound from the computer. To play back sound files through external speakers or headphones: 1 2 Locate the headphone jack on the computer. Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone jack. The headphone jack requires a 16-ohm stereo mini connector. To adjust the volume: For external speakers, use the volume controls on each speaker. For headphones, use the computers volume control.

Using the Web Camera

(Available on certain models.) Your computer may come with a built-in Web Camera. With this Web Camera you can do the following:
NOTE

Take pictures and record videos with your computer Chat with others and have them see you while using instant messaging (IM) programs Have video conference calls To email, instant message or video conference, you must be connected to the Internet.

Exploring Your Computers Features

Using an ExpressCard

137

Depending on your computer model, the process of sending email, taking pictures or recording video messages may vary. The Web Camera software, by default, should already be running. The Web Camera indicator light glows when the Web Camera is active. For more information on the software, click Start, All Programs, TOSHIBA, Utilities, and then Web Camera Application Help.

Using an ExpressCard
The ExpressCard slot supports the use of ExpressCard media. The slot also supports hot swapping, which allows you to replace one ExpressCard with another while the computer is on.

Inserting an ExpressCard
Before you insert an ExpressCard, refer to the documentation that comes with the card to see if you need to do anything before you insert it. To insert an ExpressCard: 1
NOTE

Locate the ExpressCard slot on the side of the computer. You may first need to remove the card slot protector before you can insert a card. Insert the ExpressCard.

(Sample Illustration) Inserting an ExpressCard 3 When the card is almost all the way into the slot, push firmly but gently to ensure a firm connection with the computer. Do not force the card into position.

138
1

Exploring Your Computers Features

Using the Smart Card Reader

Removing an ExpressCard
Prepare the card for removal by clicking on the Show hidden icons button ( ), if necessary, in the notification area and then selecting the Safely Remove Hardware and Eject Media icon. Select the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later. If the card can be removed now, the system displays Safe to Remove Hardware. 3 4 Locate the ExpressCard eject button. Press the ExpressCard eject button once to pop it out slightly, and push it in to remove the ExpressCard. The ExpressCard ejects slightly from the slot. 5 Grasp the edges of the ExpressCard and slide it out of the slot.

(Sample Illustration) Removing an ExpressCard

Using the Smart Card Reader

(Available on certain models.) Your computer includes a Smart Card Reader. This allows you to use a Smart Card for added security purposes. There are several different Smart Cards available for purchase as well as the software application needed. Visit your local electronics store or check the Web for other sources.

Smart Card Reader

(Sample Illustration) Smart Card Reader

Exploring Your Computers Features

Using the Memory card reader

139

Using the Memory card reader

The Memory card reader supports the use of Memory Stick, Memory Stick PRO, Memory Stick PRO Duo, Memory Stick Duo, Secure Digital (SD), or MMC (MultiMediaCard) media. These media can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc. To use a micro or mini SD card, an SD adapter is required.

To avoid damaging your card, never insert a Memory Stick Duo card without an adapter into the Memory card reader. Compatibility is not guaranteed even with an adapter. See your systems Detailed Specifications for a compatibility list. The Memory card reader may also support other types of media.
NOTE

Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the drag-and-drop feature of the Windows operating system.

Inserting memory media

The following instructions apply to all types of supported media devices. 1 2 Turn the media so that the contacts (metal areas) are face down. Push the media into the adapter until it locks in place.

(Sample Illustration) Inserting memory media

140

Exploring Your Computers Features

Using the Memory card reader

When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data.

Removing memory media

1 Prepare the card for removal by clicking on the Show hidden icons button ( ), if necessary, in the notification area and then selecting the Safely Remove Hardware and Eject Media icon. If the system is unable to prepare the media for safe removal, a message will tell you to try again later. If the media can be removed now, the system displays Safe to Remove Hardware. If the computer has a spring-loaded adapter slot, see step 2; otherwise, skip to step 3. 2 3 Gently press the card inward to release it. The card pops out slightly. Grasp the card and pull it straight out.

(Sample Illustration) Removing memory media Do not remove memory media while data is being written or read. Even when the Windows message copying... disappears, writing to the media might still be in progress and your data could be destroyed. Wait for the indicator light to go out.

Exploring Your Computers Features

Using the eSATA/USB combo port

141

Using the eSATA/USB combo port

Your computer includes an eSATA/USB combo port, which can be used with both eSATA (external Serial Advanced Technology Attachment) devices and USB devices. The eSATA interface supports fast data transfer rates, which is especially useful for transferring and storing large files such as digital photo, music or video files. Like the USB interface, the eSATA interface supports hot swapping (connecting and disconnecting devices while the computer is on). eSATA devices require an external power source.
NOTE

Your eSATA interface supports USB Sleep and Charge. For more information about USB Sleep and Charge, please see USB Sleep and Charge Utility on page 161.

Using the expansion port

The expansion port, located on the bottom of your computer, is used to attach expansion devices such as a Port Replicator (not shipped with your system). A Port Replicator is an excellent investment if you are using your computer both in and out of the office. While you are using your computer away from your desk, you can leave network cables and external devices (such as printers, a mouse, speakers, and USB devices) connected to a Port Replicator on your desk. When you return to your desk, you can then quickly connect your computer to the Port Replicator and have immediate access to all of your network resources and external devices. This eliminates the time-consuming process of connecting each external device individually, and saves wear and tear on the ports and cables. To achieve a proper connection between your computer and the Port Replicator, your computer must be properly aligned with the Port Replicator. For more information, consult the users manual that came with your Port Replicator, or visit pcsupport.toshiba.com. On some computer models, you can attach an extended life battery to the expansion port. To find expansion devices compatible with your computer model, please visit accessories.toshiba.com.

Chapter 5

Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter.
NOTE

The utilities described in this chapter, and the icons shown in the sample images are applicable only if the related utility is available on your system. TOSHIBA Assist TOSHIBA Application Installer Supervisor password User password TOSHIBA Face Recognition Utility TOSHIBA Security Assist TOSHIBA PC Diagnostic Tool Utility TOSHIBA HDD Protection Utility Mouse Utility TOSHIBA Hardware Setup

142

Utilities

TOSHIBA Assist
USB Sleep and Charge Utility TOSHIBA Zooming Utility TOSHIBA Button Support TOSHIBA Accessibility Trusted Platform Module (TPM) Fingerprint Authentication Utility TOSHIBA eco Utility TOSHIBA Service Station TOSHIBA PC Health Monitor ConfigFree

143

TOSHIBA Assist
The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears.

(Sample Image) TOSHIBA Assist window

144

Utilities

TOSHIBA Assist
The TOSHIBA Assist offers four categories of options: Connect Secure Protect & Fix Optimize

Connect
The features available in this category are: ConfigFree Connectivity Doctor Bluetooth Settings

(Sample Image) TOSHIBA Assist window Connect tab

Utilities

TOSHIBA Assist

145

Secure
The features available in this category are: Supervisor password User password TOSHIBA Security Assist

(Sample Image) TOSHIBA Assist window Secure tab

146

Utilities

TOSHIBA Assist

Protect & Fix

The features available in this category are: TOSHIBA PC Diagnostic Tool Utility TOSHIBA HDD Protection Utility

(Sample Image) TOSHIBA Assist window Protect & Fix tab

Utilities

TOSHIBA Assist

147

Optimize
The features available in this category are: Mouse Utility TOSHIBA Hardware Setup (Hardware Settings) TOSHIBA Zooming Utility TOSHIBA Button Support TOSHIBA Accessibility TOSHIBA Face Recognition Utility USB Sleep and Charge Utility TOSHIBA eco Utility

(Sample Image) TOSHIBA Assist window Optimize tab

148

Utilities

TOSHIBA Application Installer

TOSHIBA Application Installer

The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: 1 2 Click Start, All Programs, My Toshiba, and then TOSHIBA Application Installer. Click Next.

(Sample Image) TOSHIBA Application Installer screen 3 Click the item you want to install.

(Sample Image) TOSHIBA Application Installer selection screen 4 Click Install, then follow the on-screen prompts to complete the installation process.

Utilities

Setting passwords

149

Setting passwords
Setting a password lets you walk away from your computer while providing additional protection for your files. When you set a password, you must enter the password before you can work on your computer again. TOSHIBA supports several types of passwords on your computer: An instant passwordSecures your open programs and files when leaving the computer temporarily. You need to have created a password for your Windows account to use an instant password. A power-on passwordPrevents unauthorized users from starting the computer. A supervisor passwordProhibits unauthorized users from accessing certain functions such as TOSHIBA Hardware Setup. This is useful if more than one person uses the computer.

NOTE

A single user password supports the instant and power-on password functions. When setting up passwords, keep the following in mind: The user password can be set up under the supervisor password. The supervisor password must be set before the user password, or the user password must be deleted and then re-entered after the supervisor password is set.

Using an instant password

An instant password secures your system with a single keystroke. Use this feature when you leave your desk for a few minutes and do not want to turn off the computer. To use an instant password, press Fn + F1. To unlock your system, press any key or touch the pointing device and the Windows Logon screen will appear. Select your user name and enter your password, if any.

150

Utilities

Setting passwords

Using a supervisor password

A supervisor password prevents other users from changing hardware configuration options.

Setting a supervisor password

If you choose to set a supervisor or user password, TOSHIBA strongly recommends that you save your password in a location where you can later access it should you not remember it. TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer. To set a supervisor password: 1 Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. 2 3 On the left side, click the Secure tab. Click the Supervisor Password icon. The Supervisor Password tab of the TOSHIBA Password Utility window appears.

(Sample Image) Supervisor Password Utility window 4 5 Click Set. A pop-up screen appears asking for a password. Enter your password, and then enter it again to verify.

Utilities

Setting passwords
6 7

151

Click Set. Click OK if you want to save the password to a text file on a diskette or media of your choice, or click Cancel to continue without saving the password to a text file. Shut down the system to complete the process.

Deleting a supervisor password

To delete a supervisor password: 1 Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab. Click the Supervisor Password icon. The Supervisor Password tab of the TOSHIBA Password Utility window appears. Click Delete. A pop-up screen appears asking for a password. Enter the password, then click OK. A message displays confirming that the password has been deleted. Click OK to exit.

2 3

4 5

Using a user password

A user password provides instant password and power-on password protection.

Setting a user password

If you choose to set a supervisor or user password, TOSHIBA strongly recommends that you save your password in a location where you can later access it should you not remember it. TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer. To register a password for the power-on password functions: 1 Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.

152
3

Utilities

Setting passwords
Click the User Password icon. The TOSHIBA Password Utility window appears.

(Sample Image) TOSHIBA Password Utility window 4 5 6 7 Click Set. Enter your password, and then enter it again to verify. Click Set. Click OK if you want to save the password to a text file on a diskette or media of your choice, or click Cancel to continue without saving the password to a text file. Click OK to exit.

Deleting a user password

To cancel the power-on password function: 1 Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. 2 3 4 5
NOTE

On the left side, click the Secure tab. Click the User Password icon. Click Delete. Follow the on-screen instructions to remove the user password. This will remove the user password only.

Utilities

TOSHIBA Face Recognition Utility

153

TOSHIBA Face Recognition Utility

Your computer may come with the TOSHIBA Face Recognition utility. This utility provides another way to log on to your computer.
NOTE

For high security purposes, TOSHIBA Face Recognition is not a suitable substitute for Windows passwords. To ensure the security of your system use your established Windows passwords to log on.

Please refer to the online help file to learn more about this utility and what it offers. To locate the help file, go to: Start, All Programs, TOSHIBA, Utilities, Face Recognition Help. The help file covers the following topics: Setting up a Face Recognition account Registering a user image Updating a user image Changing a user image Deleting a user image Configuring Settings Authentication Functions

Please note that some changes to the likeness of a registrant, such as hair style changes or wearing a cap or glasses, may affect the recognition rates when such changes occur after the registrants image has been registered. TOSHIBA Face Recognition does not guarantee the correct identification of a user and may incorrectly recognize faces that are similar to the registrants. In addition, bright background light and or shadows may prevent a registrant from being recognized correctly. If recognition fails, log on to your computer using your Windows password. TOSHIBA does not guarantee that the face recognition utility technology will be completely secure or error-free. TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.

154

Utilities

TOSHIBA Security Assist

TOSHIBA Security Assist

The TOSHIBA Security Assist Utility acts as a command center where you can set up various passwords or other security features, and see how these features can be used with each other to increase security even further, or to simplify the ways that you protect your system. To open TOSHIBA Security Assist: Click Start, All Programs, TOSHIBA, Utilities, and then Security Assist, or click the Security Assist icon in the Secure tab of TOSHIBA Assist. The TOSHIBA Security Assist main window appears.

(Sample Image) TOSHIBA Security Assist window From the main window, you can select a category that shows the type of passwords or other security features that can be used in that scenario. The available categories are: Boot SettingSelect this category to set up security features that will prevent an unauthorized user from even starting up your machine. BIOS User Password: Set up a power-on password in the system BIOS. HDD User Password: Set up a BIOS password and use the same password for a hard disk password. Fingerprint Authentication: Register your fingerprints, to be used in place of a BIOS and/or HDD password, when requested.

Utilities

TOSHIBA Security Assist

155

Log on SettingsSelect this category to set up security options that protect individual user accounts. Password of current user: Check the status of the Windows password for the account to which you are currently logged on. Password of all users: Check the status of the Windows password for any additional Windows accounts on this computer. Fingerprint Authentication: Register your fingerprints, to be used in place of your Windows account password, to log onto your personal account.

Resume SettingSelect this category to configure which security options you want to use when your system resumes from Sleep or Hibernation. Screen Saver: Set up what you want your system to do when it comes back from the Windows screen saver. Setting for resuming from sleep or hibernation: Set up what you want your system to do when it resumes from Sleep or Hibernation Setting for closing the lid: Set up what you want your system to do when the display panel is closed or re-opened.

TPM SettingsSelect this category to set up the Trusted Platform Module (available on certain models). TPM State: Verify whether the TPM is enabled or disabled. EFS Setting: Verify the Encrypted File System settings. PSD Setting: Configure or check a Personal Secure Drive. BitLocker State: Verify whether Windows BitLocker drive encryption is enabled or disabled

OthersSelect this category to check the status of other security features. Windows Security Center: Check the status of Windows Security Center options

AdvancedSelect this category to check advanced security options (available on certain models). Wireless Key Logon: Configure your computer to allow a Bluetooth-compatible cell phone to send an unlock code.

156

Utilities

TOSHIBA PC Diagnostic Tool Utility

TOSHIBA PC Diagnostic Tool Utility

This utility can help diagnose problems with devices in your computer. Refer to the online Help documentation within the application for additional help.
NOTE

The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem.

To use the TOSHIBA PC Diagnostic Tool utility: 1 Click Start, All Programs, TOSHIBA, Utilities, and then PC Diagnostic Tool, or click the PC Diagnostic Tool icon in the Protect & Fix tab of TOSHIBA Assist. The TOSHIBA PC Diagnostic Tool window appears. 2 Click the Diagnostic Tool tab.

(Sample Image) TOSHIBA PC Diagnostic Tool window 3 Select the devices that you would like to test by clicking the check box that appears to the left of the device. Click the + (plus) and - (minus) symbols to expand and collapse the categories. Click Start Diagnostics when you are ready to begin the tests.

NOTE

Utilities

TOSHIBA HDD Protection Utility

157

TOSHIBA HDD Protection Utility

The TOSHIBA HDD Protection Utility controls your computers hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk drive (HDD) protection, and set the motion detectors sensitivity level for AC power and battery power operation. To use the TOSHIBA HDD Protection utility: 1 Click Start, All Programs, TOSHIBA, Utilities, and then HDD Protection Settings, or click the HDD Protection icon in the Protect & Fix tab of TOSHIBA Assist. The TOSHIBA HDD Protection Properties window appears.

(Sample Image) TOSHIBA HDD Protection Properties window 2 3 4 Select ON to enable HDD protection, or select OFF to disable HDD protection. Set the battery and AC power detection levels as desired. Click OK.

158

Utilities

Mouse Utility

Mouse Utility
The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: 1 Click Start, Control Panel, Hardware and Sound, and then under Devices and Printers, click Mouse, or click the Mouse icon in the Optimize tab of TOSHIBA Assist. qq The Mouse Properties screen appears.

(Sample Image) Mouse Properties screen The settings you can change are divided into these categories: Buttons Pointers Pointer Options Hardware Advanced

You may see additional categories depending on your particular pointing device. 2 Adjust the settings as desired, then click OK.

Utilities

TOSHIBA Hardware Setup

159

TOSHIBA Hardware Setup

TOSHIBA Hardware Setup is the TOSHIBA configuration management tool available through the Windows operating system. To access it: Click Start, All Programs, TOSHIBA, Utilities, and then HWSetup, or click the TOSHIBA Hardware Settings icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA HWSetup screen appears.

(Sample Image) TOSHIBA HWSetup screen General tab options The TOSHIBA HWSetup screen may have the following tabs: Boot PriorityAllows you to change the sequence in which your computer searches the drives for the operating system You can also manually choose the Boot Priority by pressing the power button to power on the computer, then quickly pressing the F12 key. Select the boot device by pressing the arrow keys, then pressing the Enter key.
NOTE

Since the system is a quick-booting system, you must press the keys immediately after pressing the power button.

160

Utilities

TOSHIBA Hardware Setup

CPUAllows you to enable or disable CPU frequency switching modes Dynamically SwitchableThis mode is the default setting for your computer, and automatically changes the processing frequency and decreases voltage depending on the power source: AC PowerIf your computer is connected to the AC adaptor, the CPU frequency mode is set to high for faster processing. Battery PowerIf your computer is running on battery power, the CPU frequency mode is set to low for slower processing. Switching the CPU to low allows you to conserve power and extend the operating time of your battery.

Always LowSets the CPU speed to low when using either the battery or the AC adaptor DisplayAllows you to change various default settings for the built-in display When the computer restarts, it remembers the last configuration. If data does not appear on the display you are using after starting in Sleep mode, press Fn + F5. For more information, see Directing the display output when you turn on the computer on page 80. GeneralAllows you to view the current BIOS version or change certain settings back to their default values KeyboardAllows you to access the wake-on keyboard function LANAllows you to set networking functions PasswordAllows you to set a user password SATAAllows you to set conditions for the eSATA port USBAllows you to enable or disable USB Legacy Emulation

NOTE

Utilities

USB Sleep and Charge Utility

161

USB Sleep and Charge Utility

This utility displays whether the USB Sleep and Charge function is enabled or disabled and shows the position of the USB port that supports the USB Sleep and Charge function. It also displays the remaining battery capacity.

Starting the USB Sleep and Charge Utility

To start this utility, click Start, All Programs, TOSHIBA, Utilities, and then USB Sleep and Charge.

USB Sleep and Charge

Your computer can supply USB bus power (DC 5V) to the USB port even when the computer is in Sleep mode, Hibernation mode or shutdown state (powered off). This function can only be used for the port that supports the USB Sleep and Charge function (hereinafter called compatible port). Compatible ports are USB ports that have the ( ) symbol icon. You can use the "USB Sleep and Charge function" to charge certain USB compatible external devices such as mobile phones or portable digital music players. However, the "USB Sleep and Charge function" may not work with certain external devices even if they are compliant with the USB specification. In those cases, power on the computer to charge the device.

162
NOTE

Utilities

USB Sleep and Charge Utility

When USB Sleep and Charge function is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports. However, some external devices cannot be charged solely by supplying USB bus power (DC 5V). As for the specifications of the external devices, please contact the device manufacturer or check the specifications of the external devices thoroughly before use. If USB Sleep and Charge is enabled, the computers battery will discharge during hibernation or when the computer is turned off. It is recommended that you connect the AC adaptor to the computer when enabling the USB Sleep and Charge function. Using the USB Sleep and Charge function to charge external devices will take longer than charging the devices with their own chargers. If an external device is connected to the compatible port when the AC adaptor is not connected to the computer, the battery of the computer will be depleted even when the power of the computer is turned OFF. As such, we recommend that you connect the AC adaptor to the computer when using the USB Sleep and Charge function. External devices connected to the USB bus power (DC 5V) function that interfaces with the power ON/OFF of the computer may always be in an operational state. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC 5V) supply may be stopped for safety reasons. When "USB Sleep and Charge function" is set to Enabled, the "USB Wakeup function" does not work for compatible port. In that case, if there is a USB port that does not have the USB Sleep and Charge function-compatible icon ( ), attach the mouse or keyboard to it. The "USB Wakeup function" will now work, but the "USB Sleep and Charge function" will be disabled.

Utilities

USB Sleep and Charge Utility

163

Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag.

Enabling USB Sleep and Charge

This utility can be used to enable or disable the USB Sleep and Charge function. To enable this function, select the Enable USB Sleep and Charge check box in the utility. To disable this function, de-select the check box. You can also control whether charging takes place when the computer is running on battery power. To do so, select or de-select the Enable under Battery Mode check box in the utility. If you enable charging when the computer is running on battery power, you can specify that charging stops when battery power drops below a certain level. Use the slider at the bottom of the utility window (beneath the Lower limit of remaining battery life heading) to specify when charging should stop. For example, if you set the slider to 10%, charging will stop when 10% or less of the battery power remains.

Power supply mode settings

Your computer may provide two different charging modes, to support various types of USB devices. If your computer provides more than one charging mode, the charging mode you should select depends on the USB device you want to charge. For example, Typical Mode, which is the default mode, will charge a wide variety of digital audio players. If your device does not charge in Typical Mode, try using Alternate Mode. To select a different

164

Utilities

USB Sleep and Charge Utility

charging mode, use the Power supply mode drop-down list in the utility.

(Sample Image) TOSHIBA USB Sleep and Charge Utility screen

NOTE

With certain external devices, the USB Sleep and Charge function may not work no matter which charging mode you select. In those cases, disable USB Sleep and Charge in the utility and turn the computer on to charge the device, or use a different charging device.

Utilities

TOSHIBA Zooming Utility

165

TOSHIBA Zooming Utility

This utility allows you to select which applications will work with the zoom in/out hot keys (see Zoom (Display resolution) on page 223). You may select all applications or any subset of the following: 1 Microsoft Internet Explorer Microsoft Office Windows Media Player Adobe Acrobat Reader Icons on the desktop Click Start, All Programs, TOSHIBA, Utilities, and then Zooming Utility. The TOSHIBA Zooming Utility Properties screen appears.

To access the TOSHIBA Zooming Utility:

(Sample Image) TOSHIBA Zooming Utility Properties screen 2 Select the desired option(s). 3 Click OK. The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the Fn key and press 2; to zoom out, hold down the Fn key and press 1.

166

Utilities

TOSHIBA Button Support

TOSHIBA Button Support

TOSHIBA Button Support allows you to customize the buttons. These buttons are located on the system control panel directly above the keyboard. To access TOSHIBA Button Support: 1 Click the TOSHIBA Button Support icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA Button Support window appears.

(Sample Image) TOSHIBA Button Support screen 2 3 4 Under Button Name, select the button whose function is to be customized. Make the desired selections. Click Close.

Utilities

TOSHIBA Accessibility

167

TOSHIBA Accessibility
The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the Fn key a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.

(Sample Image) TOSHIBA Accessibility window To use TOSHIBA Accessibility: 1 Click Start, All Programs, TOSHIBA, Utilities, and then Accessibility, or click the Accessibility icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA Accessibility window appears. 2 3 4 Check the Use Fn-StickyKey box. Put a check mark next to the desired option. Click OK.

168
NOTE

Utilities

Trusted Platform Module (TPM)

Trusted Platform Module (TPM)

This section only applies to systems with TPM.

Your TOSHIBA computer includes the TPM (Trusted Platform Module), which is a security encryption device for your systems internal storage drive. TPM is already included on your system, but needs to be installed and enabled using the following procedures. To install TPM: 1 Launch the TOSHIBA Application Installer from the desktop and install the following packages: 2 Infineon Trusted Platform Module Utility Infineon TPM (Trusted Platform Module) Installation Guide

Follow the directions on your screen.

Once the TPM files have been installed, you will need to enable the TPM feature through your systems BIOS. To enable TPM: 1 2 3 4 5 6 Power on your system while holding down the Esc key. Press F1 when directed. Press the PgDn key. Press the down arrow key until TPM is highlighted, then press the space bar to change the TPM status to Enabled. Press Y to save the changes. Press End and then press Y to accept the changes. Your system will restart. For further information on how to set up and use this utility, refer to the Infineon TPM (Trusted Platform Module) Installation Guide.

Utilities

Fingerprint Authentication Utility

169

Fingerprint Authentication Utility

The fingerprint authentication utility (available on certain models) can be used to replace the keyboard-based user password authentication system when booting up. The fingerprint authentication utility can also be used for user logon. The users fingerprint is read; if the system recognizes the fingerprint, the user is automatically logged on.

Fingerprint utility limitations

TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free. TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.

Using the Fingerprint Authentication Utility

To access the Fingerprint Authentication Utility, click Start, All Programs, TOSHIBA, Utilities, and then select the Fingerprint Utility. For information on enrolling fingerprints and using the utility please refer to your online help file.
NOTE

It is recommended that you complete the Fingerprint practice tutorial before starting fingerprint enrollment. The Fingerprint practice tutorial shows how to achieve the highest quality fingerprint samples. If you choose to use this utility it is strongly recommended that you delete your fingerprint template data before transferring ownership or disposing of your computer. Otherwise, personal information and/or proprietary information on the internal storage drive may be viewed by a third party. For details on how to delete the fingerprint data, see your Online help file.

170

Utilities

Fingerprint Authentication Utility

Fingerprint Logon
The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are saved and associated with the users Windows user account. When the user attempts to log on again, the users fingerprint is read and compared with the users enrolled fingerprints; if the fingerprint is recognized, user logon is completed. The Fast User Switching feature of the Windows operating system is also supported. If user A is logged on and the fingerprint utility verifies the fingerprint of user B (who is already enrolled), the utility recognizes the fingerprint and switches the users. If your system supports power-on security, existing fingerprint samples can be used also for power-on authentication.

Care and maintenance of your fingerprint reader

Failure to follow these guidelines and/or procedures might result in damage to the reader or cause reader failure, finger recognition problems, or lower finger recognition success rate. Do not scratch or poke the reader with your nails or any hard or sharp objects. Do not press the reader with too much pressure. Do not touch the reader with a wet finger or any wet objects. Keep reader surface dry and free of water vapor. Do not touch the reader with a soiled finger. Minute foreign particles on a soiled or dirty finger may scratch the reader. Do not paste stickers or write on the reader. Do not touch the reader with a finger or any object with built-up static electricity.

Observe the following before you swipe your finger on the reader, whether for fingerprint enrollment/registration or recognition. Wash and dry your hands thoroughly. Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of reader failures, especially during dry seasons such as winter. Clean the reader with a lint-free cloth. Do not use detergent to clean the reader.

Utilities

Fingerprint Authentication Utility

171

Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. Soaked or swollen finger (e.g., after taking bath) Injured finger Wet finger Soiled or oily finger Extremely dry skin condition on finger

Observe the following to improve the fingerprint recognition success rate. Enroll two or more fingers. Enroll additional fingers if recognition failure occurs often using enrolled fingers. Check your finger condition. Changed conditions, such as injured, rough, extremely dry, wet, soiled, dirty, oily, soaked or swollen fingers, may lower the recognition success rate. Also if the fingerprint is worn down or the finger becomes thinner or fatter, the recognition success rate may be lowered. The fingerprint for each finger is different and unique. Please ensure that only the registered or enrolled fingerprint or fingerprints are used for identification. Check sliding position (see illustration below).

(Sample Illustration) Aligning the finger on the reader

172

Utilities

Fingerprint Authentication Utility

Fingerprint reader limitations

The fingerprint reader compares and analyzes the unique characteristics in a fingerprint. However, there may be instances where certain users are unable to register their fingerprints due to insufficient unique characteristics in their fingerprints. A warning message will be displayed when recognition is abnormal or recognition is not successful within a fixed duration. The recognition success rate may differ from user to user. TOSHIBA does not guarantee that this fingerprint recognition technology will be error-free.

TOSHIBA does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

Utilities

TOSHIBA eco Utility

173

TOSHIBA eco Utility

The TOSHIBA eco Utility monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To access the TOSHIBA eco Utility, do one of the following: Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA eco Utility. Double-click the TOSHIBA eco Utility icon in the notification area. Right-click the TOSHIBA eco Utility icon in the notification area and select Launch TOSHIBA eco Utility.

The TOSHIBA eco Utility window appears.

(Sample Image) TOSHIBA eco Utility window To activate the TOSHIBA eco power plan, select ON in the upperleft section of the screen. For more information on the TOSHIBA eco power plan and utility, click the Help button at the bottom of the window.

174

Utilities

TOSHIBA Service Station

TOSHIBA Service Station

The TOSHIBA Service Station helps you keep your new computer running at its best by notifying you when updated software, firmware, documentation or other information is available for your computer. The TOSHIBA Service Station will alert you when updates are available, and you can then choose to install the updates if you wish.

TOSHIBA PC Health Monitor

The TOSHIBA PC Health Monitor software program monitors computer system functions such as power consumption, the cooling system and the 3D Accelerometer (available on certain models). It alerts users to specific system conditions via pop-up messages. It also tracks the usage of the computer and related devices and logs service-relevant information on the computer's internal storage drive. The collected information includes device operation time and number of actuations or status changes (e.g.: number of power button and Fn key combination uses, and AC adaptor, battery, LCD, fan, HDD, sound volume, wireless communication switch, docking and USB information), date of initial system use, and also computer and device usage (e.g.: power settings, battery temperature and recharging, CPU, memory, backlight illumination time, and temperatures for various devices). The collected information is not limited to the examples specified here. The stored data uses a very small portion of the total hard disk capacity (approximately 3 MB or less per year). This information is used to identify and provide a notification of system conditions that may affect the performance of your TOSHIBA computer. It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA's authorized service providers. Additionally, TOSHIBA may use this information for quality assurance analysis. Subject to the use restrictions above, the data logged on the internal storage drive may be transferred to entities located outside of your country or region of residence (e.g., European Union). Those countries may or may not have the same data protection laws or data protection levels as required by your home country or region.

Utilities

ConfigFree

175

You may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via the Windows Control Panel. Doing so will automatically delete all collected information from the internal storage drive. The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its standard limited warranty in any way. TOSHIBA's standard limited warranty terms and limitations apply.

ConfigFree
NOTE

All references to Bluetooth in this section are applicable only if Bluetooth is available on your system.

ConfigFree is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
NOTE

For more information on using ConfigFree, see the ConfigFree online Help.

The ConfigFree utilities include the following: Connectivity DoctorThe Connectivity Doctor utility is used to analyze network connections and fix networking problems with your computer. For more information, see Connectivity Doctor on page 176. Profile SettingsThe Profiles utility lets you switch between network configurations. For more information, see Profile Settings on page 177.

Getting Started
This section contains information about the ConfigFree main screen, and how to start and set up ConfigFree. For more detailed information on setting up and using ConfigFree, see the Help File included in the application.

176

Utilities

ConfigFree

Starting ConfigFree
To start ConfigFree, be sure the computer has a wired or wireless connection. Then perform any of the following steps: Click Start, All Programs, TOSHIBA, ConfigFree, and then click the desired utility. Double-click the ConfigFree icon Click the ConfigFree icon then click the desired utility. in the notification area.

in the notification area, and

NOTE

If your computer is not connected to a network, the ConfigFree icon in the notification area is displayed with an X.

ConfigFree Utilities Connectivity Doctor

The Connectivity Doctor lets you analyze your network connections and fix network connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer. The Connectivity Doctor works with the following network devices: Wired and wireless network devices Access points Status of the PC Network Connections Status of wired and wireless connections Wireless Connection band (a/b/g, etc.)

The Connectivity Doctor displays the following information:

Utilities

ConfigFree
Status of Wireless Connection switch

177

(Sample Image) Connectivity Doctor screen

Profile Settings
The Profile Settings utility lets you save network settings in profiles. ConfigFree profiles are useful for easily switching network settings and devices. You can switch network settings simply by selecting the profile with the desired settings. If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network. Similarly, users who access networks in the office and at home can set up profiles to handle these networking environments. A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or captured) in a profile: Internet settingsincludes LAN settings (proxy server settings) and the address of a home page that opens automatically when Internet Explorer starts Deviceslets you enable or disable settings of wired and wireless network devices, infrared devices, and set the power status of Bluetooth antennas TCP/IP settingsincludes DHCP, IP address, subnet mask, default gateway, DNS server, and WINS server settings Personal firewall settings for Internet connections Bluetooth Security Level (for example, high or medium) Enable UAC (User Account Control) setting

178
1 2 3

Utilities

ConfigFree
To create a profile: Click the icon in the notification area.

Move the pointer to Profiles. Click Open Settings. The ConfigFree Profile Settings window appears.

(Sample Image) ConfigFree Profile Settings window 4 Click Add to start the Create Profile Wizard.

Chapter 6

If Something Goes Wrong

Some problems you may encounter when using your computer are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshibas support services at the end of this chapter.

Problems that are easy to fix

Your program stops responding.
If you are working with a program that suddenly freezes all operations, chances are the program has stopped responding. You can exit the failed program without shutting down the operating system or closing other programs. To close a program that has stopped responding: 1 Press Ctrl, Alt, and Del simultaneously (once), then click Start Task Manager. The Windows Task Manager window appears.

179

180
2

If Something Goes Wrong

Problems when you turn on the computer

Click the Applications tab. If a program has stopped responding, the words not responding appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with the next step. 4 Close the remaining programs one by one by selecting the program name, then End Task. Closing all programs should allow you to continue working. If it does not, power off your computer and then restart it.

Problems when you turn on the computer

These problems may occur when you turn on the power.

The computer will not start.

Make sure you attached the AC adaptor and power cord/cable properly or installed a charged battery. Press and hold the power button for at least 10 seconds. If you are using the AC adaptor, check that the wall outlet is working by plugging in another device, such as a lamp. Verify that the computer is on by looking at the ON/OFF indicator. If the indicator is glowing, the computer is on. Also, try turning the computer off and then on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.

The computer starts but when you press a key nothing happens.
Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again. Your computer may be in Sleep mode and have a software or resource conflict. When this happens turning the power on returns you to the problem instead of restarting the system. To clear the condition, press Ctrl, Alt, and Del simultaneously. Then shut down the computer via software, or follow the steps if your program stops responding (see Problems that are easy to fix on page 179).

If Something Goes Wrong

Problems when you turn on the computer

181

The computer is not accessing the internal storage drive or the optional external diskette drive.
Your computer normally loads the operating system from the internal storage drive. If you have an internal storage drive problem, you will not be able to start the computer. Insert a system diskette into the optional external diskette drive and press F12 when the machine starts and use the arrow keys to select the boot-up device. (You may need to press F12 several times.)

The computer displays the WARNING RESUME FAILURE/Windows Error Recovery Windows did not shut down successfully message.
To continue, select Start Windows normally. This can happen if the computer was put into Sleep mode and the battery has discharged. If you performed a shutdown before this message was displayed, a program or driver may have prevented Windows from shutting down. Data stored in the computers memory has been lost. Data stored in the computers internal storage drive may not be affected. Always save your data even when you are using Sleep mode. If your battery fully discharges, information that has not been saved will be lost. Your computer can be configured to warn you when the battery is running low see What to do when the main battery runs low on page 118. If you are running on battery power, it is recommended that you do not leave the computer in Sleep mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours. For more information see Charging batteries on page 114.

The computer displays the Non-System disk or disk error message.

Make sure there is no diskette in the optional external diskette drive. If there is a diskette in the drive, remove it and press any key to continue. If pressing any key does not work, press Ctrl, Alt, and Del. The Windows Logon screen appears. Click the red arrow button ( ) in the lower-right corner of the desktop to display the Shut down options, and then select Restore to restart the computer. For more information see The computer is not accessing the internal storage drive or the optional external diskette drive. on page 181.

182
1

If Something Goes Wrong

Problems when you turn on the computer

The AC power light is blinking.

If the AC power light is blinking, try the following steps: Cut off power to the computer by disconnecting the AC adaptor and removing the battery. The error condition will be interrupted, and the AC power light will stop flashing. Put the battery back into the computer. Do not connect the AC adaptor. Try turning the computer on again. If the computer starts normally, the AC adaptor may be defective and will need to be replaced. If the AC power light starts flashing, remove the battery, and continue with the steps below. 3 Connect the AC adaptor to the computer. Leave the battery out of the computer. Try turning the computer on again. If the computer starts normally, the battery may need charging, may be depleted, or may be defective. Turn the computer on, insert the battery, and then leave the computer running for several hours, which will deliver a slow, steady trickle-charge to the battery. Once the battery has been trickle-charged, it may begin working correctly again. If the trickle-charging does not prove effective, visit the Toshiba Web site at pcsupport.toshiba.com and see the Support Bulletin Step-Charging the computers battery (click the Ask Iris link and search for the support bulletin by name). 4 Connect the AC adaptor to a different power outlet, preferably in a different room. If the computer starts normally, there may be a problem with the AC outlet itself, or the voltage level available from it.

If Something Goes Wrong

The Windows operating system is not working

5

183

Verify that the AC adaptor is the correct unit for your computer model. The computer may not be able to start from an AC adaptor that is rated for less current (amperage) than the computer requires, even if the rated voltage is correct, and the plug fits correctly in the DC-IN socket. The labels on the bottom of the computer and the AC adaptor show the specifications for voltage ("V") and current ("A") for each device. The voltage level must match exactly. The amperage rating of the AC adaptor must be equal to or greater than that required by the computer.

The battery light is blinking when the computer is on.

If the battery light is blinking when the computer is on, this indicates a power mismatch. Do the following: 1 2 Check the OUTPUT specifications on the AC adaptor (for example, DC 19V 3.95A) Check the INPUT specifications on the bottom of the computer. The output specifications of the AC adaptor must match the input specifications of the computer. 3 If the specifications do not match, locate and use the AC adaptor that shipped with your computer. If the specifications do match, contact Toshiba. See Contacting Toshiba on page 206.

The Windows operating system is not working

Once you are familiar with the desktop and used to the way the operating system responds to your work routine, you can easily detect if the operating system is not working correctly. For example: The operating system fails to start after the initial startup appears. The operating system takes a long time to start. The operating system responds differently from the normal routine. The screen does not look right.

Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.

184

If Something Goes Wrong

The Windows operating system is not working

Using Startup options to fix problems

If the operating system fails to start properly, you may have to change your systems configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. To open the Startup menu: 1 2 Restart your computer. Press F8 when your computer starts and before Windows starts loading. The Windows Advanced Boot Options menu displays these options: Repair Your Computer Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Enable Boot Logging Enable low-resolution video (640 x 480) Last Known Good Configuration (advanced) Directory Services Restore Mode Debugging Mode Disable automatic restart on system failure Disable Driver Signature Enforcement Start Windows Normally

When you highlight each option using the arrow keys, Windows displays information about each option at the bottom after Description. See your Windows documentation for further explanation.
NOTE

If your computer is connected to a network, the Startup menu may display different versions of Safe mode.

If Something Goes Wrong

The Windows operating system is not working

185

Internet problems
My Internet connection is very slow.
Many factors contribute to the speed with which you can surf the Internet. They include: network speed, network conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access. If accessing a particular site is very slow, try later.

My browser cannot find the URL address I typed in.

Make sure you separated the domain names of the address with the forward slash (/). Check the spelling of each name and the syntax of the address carefully. A single incorrect letter or missed character will make it impossible for your browser to locate the site.

My browser cannot find a site I bookmarked.

The World Wide Web is constantly changing. A site you bookmarked yesterday may not be available today or its server may be down for temporary repair. Try again later.

The Windows operating system can help you

If the operating system has started properly but you still have a problem using your computer, the online Help can assist you in troubleshooting the problem. To access the Windows operating system Help and Support: 1 2 Click Start, then click Help and Support, or press F1. The Help and Support window appears. Then do one or both of the following: In the Search programs and files field, type in the topic for which you need help and follow the on-screen instructions. Click one of the options listed in the window and then follow the on-screen instructions.

You can connect to Support Online by clicking the Ask button and then clicking Microsoft Customer Support or by going to Toshiba support at pcsupport.toshiba.com.

186

If Something Goes Wrong

Fixing a problem with Device Manager

Fixing a problem with Device Manager

Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.

Checking device properties

Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a devices properties: 1 2 3 Click Start, Control Panel, System and Security, and then under System, click Device Manager. To view the device(s) installed, double-click the device type. To view the properties, double-click the device. The operating system displays the device Properties dialog box, which provides an array of tabs. They may include: The General tab, which provides basic information about the device. The Resources tab, which lists resources assigned to the device. This tab does not appear if the device is not using resources. The Driver tab, which displays the drivers being used by the device. This tab also provides options for updating the driver or rolling back the driver in case the new version is causing a problem.

The tabs that appear in the dialog box vary from one device to another. For more information about Device Manager, refer to Windows online Help.

If Something Goes Wrong

Memory problems

187

Memory problems
Incorrectly connected or faulty memory modules may cause errors that seem to be hardware or even software related. It is worthwhile checking for these first: 1 Click Start, and then click the Shut down button in the lower-right corner of the Start menu. The computer shuts down completely. 2 3 Remove the memory module, following the instructions in Removing a memory module on page 58. Reinstall the memory module, following the instructions in Installing a memory module on page 51, and making sure the module is seated properly. Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.

4 5

NOTE

For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.

Power and the batteries

Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery, optional secondary battery, and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adaptor or power cord/cable will neither power the computer nor recharge the batteries. Here are some typical problems and how to solve them:

The AC power light does not come on when you plug in the AC adaptor and power cord/cable.
Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer.

188

If Something Goes Wrong

Power and the batteries

If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.

The AC adaptor and power cord/cable work correctly, but the battery will not charge.
The battery does not charge while the computer is consuming full power. Try turning off the computer. The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery. See Removing the battery from the computer on page 123. The battery may be too hot or too cold to charge properly. If you think this is the probable cause, let the battery reach room temperature and try again. If the battery has completely discharged, it will not begin charging immediately. Leave the AC adaptor and power cord/cable connected, wait 20 minutes and see if the battery is charging. If the battery light is glowing after 20 minutes, let the computer continue charging the battery for at least another 20 minutes before you turn on the computer. If the battery light does not glow after 20 minutes, the battery may have reached the end of its useful life. Try replacing it.

The battery appears not to power the computer for as long as it usually does.
If you frequently repeat shallow charge and discharge, the battery meter may become inaccurate. Let the battery discharge completely, then try charging it again. Check the power options via your Power Plans (see Power Plans on page 120). Have you added a device, such as an ExpressCard or memory module, that takes its power from the battery? Is your software using the internal storage drive more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts. After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com. Refer to this site often to stay current on the most recent software and hardware options for your computer, and for other product information. For more information on maintaining battery power, see Charging batteries on page 114.

If Something Goes Wrong

Keyboard problems

189

Keyboard problems
If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.

The keyboard produces unexpected characters.

A keypad overlay may be on. If the numlock light or cursor control overlay light is on, press Fn + F10 to turn off the cursor control overlay light, or Fn + F11 to turn off the numlock light. If the problem occurs when both the keypad overlays are off, make sure the software you are using is not remapping the keyboard. Refer to the software documentation and check that the program does not assign different meanings to any of the keys.

You have connected an external keyboard and the operating system displays one or more keyboard error messages.
You may need to update your keyboard driver. Refer to the documentation that came with the keyboard or to the keyboard manufacturer's Web site. The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard.

Display problems
Here are some typical display problems and their solutions:

The screen is blank.

Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing Fn and F1 simultaneously. If you have registered a password, press any key, type the password and press Enter. If no password is registered, press any key. The screen reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, press Fn and F5 simultaneously (once). If this does not correct the problem, press Fn and F5 simultaneously again to return the display priority to its previous setting. HINT: Holding the Fn key and pressing the F5 key several times will advance you through the display options.

190

If Something Goes Wrong

Display problems
If you are using an external monitor: Check that the monitor is turned on. Check that the monitors power cord/cable is firmly plugged into a working power outlet. Check that the cable connecting the external monitor to the computer is firmly attached. Try adjusting the contrast and brightness controls on the external monitor. Press Fn and F5 simultaneously to make sure the display priority is not set for the built-in screen.

The screen does not look correct.

You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Personalize. This opens the Personalization window. Choose a theme for your desktop background, under Colors, Sounds, and Screen Saver, or change the settings for each of these components individually. Click Display and then Change display settings to choose the screen resolution. For more information, see the Windows online Help.

A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware.
Reduce the size of the color palette to one that is supported by the computers internal display. To change the display properties: 1 2 3 4 Right-click in a blank area of the Windows desktop. Click Personalize, and then Display. Adjust the screen resolution and/or color quality. Click OK.

The display mode is set to Simultaneous and the external display device does not work.
Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.

If Something Goes Wrong

Disk or storage drive problems

191

Small bright dots appear on your TFT display when you turn on your computer.
Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate. This is also an intrinsic characteristic of the screen technology. When the computer is operated on battery power, the screen will dim and you may not be able to increase the brightness of the screen while on battery power.

Disk or storage drive problems

Problems with the storage drive or with a diskette drive usually show up as an inability to access the drive or as sector errors. Sometimes a drive problem may cause one or more files to appear to have garbage in them. Typical problems are:

You are having trouble accessing a drive, or one or more files appear to be missing.
Make sure you are identifying the drive by its correct name (A: or C:).

Error-checking
Run Error-checking, which analyzes the directories and files on the storage drive and repairs any damage it finds. To run Error-checking: 1 2 3 Click Start, and then Computer. Right-click the drive you want to check. On the pop-up menu, click Properties. The drives Properties box appears.
NOTE

This feature is not available for optical disc drives. Click the Tools tab. Click the Check now... button. The Check Disk box appears.

4 5

192
6

If Something Goes Wrong

Disk or storage drive problems

You can choose one or both options: 7 Automatically fix file system errors Scan for and attempt recovery of bad sectors

Click Start. Error-checking tests and repairs the storage drive.

Your hard disk seems very slow.

If you have been using your computer for a long time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, All Programs, Accessories, System Tools, and then Disk Defragmenter. After it opens, click Defragment disk.

Your data files are damaged or corrupted.

Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult your network administrator.

Some programs run correctly but others do not.

This is probably a configuration problem. If a program does not run properly, refer to its documentation and check that the hardware configuration meets its needs.

A diskette will not go into the optional external diskette drive.

You may already have a diskette in the drive. Make sure the drive is empty. You may be inserting the diskette incorrectly. Hold the diskette with the hub side facing down, and insert it so that the metal head window cover goes into the drive first. The metal cover or a loose label may be obstructing the path into the drive. Carefully inspect the diskette. If the metal cover is loose, replace the diskette. If the label is loose, replace the label and try inserting the diskette again.

The drive cannot read a diskette.

Try another diskette. If you can access the second diskette, the first diskette (not the drive) is probably causing the problem. Run Error-checking on the faulty diskette (for instructions see Disk or storage drive problems on page 191).

If Something Goes Wrong

Optical disc drive problems

193

Optical disc drive problems

You cannot access a disc in the drive.
If the optical disc drive is an external drive, make sure that the drives cable is properly connected to the computer. Make sure the tray that holds the optical disc is closed properly. Press gently until it clicks into place. Open the tray and remove the disc. Make sure the tray is clean. Any dirt or foreign object can interfere with the laser beam. Examine the disc to see if it is dirty. If necessary, wipe it with a clean cloth dipped in water or a neutral cleaner. Replace the disc in the tray. Make sure that the disc is lying flat, label side up. Close the tray carefully, making sure it has shut completely.

You press the disc eject button, but the drive tray does not slide out.
Make sure the computer is connected to a power source and turned on. The optical disc drive eject mechanism requires power to operate. Make sure a program is not accessing the drive and preventing it from ejecting. If you need to remove a disc and cannot turn on the computer (for example, if the battery is completely discharged), use a narrow object, such as a straightened paper clip, to press the manual eject button. This button is in the small hole next to the optical disc drive eject button on the face of the optical disc drive tray. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.

Some discs run correctly but others do not.

Check that the type of disc you are using is compatible with your optical disc drive. For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at pcsupport.toshiba.com. If the problem is with an optical data disc, refer to the softwares documentation and check that the hardware configuration meets the programs needs.

194

If Something Goes Wrong

Sound system problems

The disc will not come out of the drive when you click the eject button on the screen.
Press the button on the optical disc drive itself. For additional information see You press the disc eject button, but the drive tray does not slide out. on page 193.

Sound system problems

No sound is coming from the computers speakers.
Adjust the volume control. Try pressing Fn + Esc to see if volume mute is disabled. Check that the volume control on the computer is turned up. If you are using external headphones or speakers, check that they are securely connected to your computer.

The computer emits a loud, high-pitched noise.

This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.

ExpressCard problems
ExpressCards include many types of devices, such as a removable hard disk, additional memory, or a pager. Most ExpressCard problems occur during installation and setup of new cards. If you are having trouble getting one or more of these devices to work together, several sections in this chapter may apply. If your system does not have built-in drivers for your ExpressCard and the card did not come with an operating system driver, it may not work under the operating system. Contact the manufacturer of the ExpressCard for information about using the card under the operating system.

ExpressCard checklist
Make sure the card is inserted properly into the slot. Make sure all cables are securely connected. Occasionally a defective ExpressCardslips through quality control. If another computer with a ExpressCard slot is available, try the card in that machine. If the card malfunctions again, it may be defective.

If Something Goes Wrong

ExpressCard problems

195

Resolving ExpressCard problems

Here are some common problems and their solutions:

The slot appears to be dead. ExpressCards that used to work no longer work.
Check the ExpressCard status: 1 2 Click Start, Control Panel, System and Security, and then under System, click Device Manager. Double-click the appropriate ExpressCard, which will be listed under one of the categories shown, for example: Disk drives, Network adapters, Other, etc. The operating system displays your ExpressCards Properties dialog box, which contains information about your ExpressCard configuration and status.

The computer stops working (hangs) when you insert an ExpressCard.

1 If the ExpressCard causes the system to hang, hold down the ON/OFF button until the computer shuts down (approximately 10 seconds). Restart the computer and press the F8 key immediately after pressing the ON/OFF button. From the menu, select Safe Mode. After the computer starts, click Start, Control Panel, System and Security, and then under System, click Device Manager. Look for an item with a yellow shield with an exclamation mark in it. This indicates there is a resource conflict. Do one of the following: If there is a resource conflict, right-click the item marked with the yellow exclamation point and select Uninstall from the menu, and then proceed to step 6. If no resource conflict is indicated, contact the card manufacturer for additional troubleshooting assistance.

2 3 4 5

6 7 8 9

Click OK to confirm the uninstall. In the Device Manager window, click the Action menu and select Scan for Hardware changes. Restart the computer normally. If the issue is not resolved, contact the card manufacturer for additional troubleshooting assistance.

196

If Something Goes Wrong

Printer problems

Hot swapping (removing one ExpressCard and inserting another without turning the computer off) fails.
Follow this procedure before you remove an ExpressCard: 1 Prepare the card for removal by clicking on the Show hidden icons button ( ), if necessary, in the notification area and then selecting the Safely Remove Hardware and Eject Media icon. Click Eject [device name] for the device you want to remove. The Safe To Remove Hardware message appears. 3 Remove the device. Never swap modules when the computer is in Hibernation or Sleep mode. This is known as warm swapping and is not supported. For more information on Hibernation and Sleep modes see Hibernation mode on page 83 and Sleep mode on page 84.

The system does not recognize your ExpressCard.

Refer to the ExpressCard documentation. Removing a malfunctioning card and reinstalling it can correct many problems.

An ExpressCard error occurs.

Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the cards documentation, which should contain a troubleshooting section.

Printer problems
This section lists some of the most common printer problems.

The printer will not print.

Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray. Make sure the printer cable is firmly attached to the computer and the printer.

If Something Goes Wrong

Modem problems

197

Run the printers self-test to check for any problem with the printer itself. Make sure you installed the proper printer drivers as shown in Setting up a printer on page 82 or in the instructions that came with the printer. You may have connected the printer while the computer is on. Disable Sleep mode, turn off the computer, and turn off the printer. Turn the printer back on, make sure it is online, and then turn the computer back on. Try printing another file. For example, you could create and attempt to print a short test file using Notepad. If a Notepad file prints correctly, the problem may be in your original file. If you cannot resolve the problem, contact the printers manufacturer.

The printer will not print what you see on the screen.
Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode. This mode lets you see your work exactly as it will print. Contact the software manufacturer for more information.

Modem problems
(Available on certain models.) This section lists common modem problems.

The modem will not receive or transmit properly.

Make sure the cable from the modem to the telephone line is firmly connected to the computers modem port and the telephone line jack. Check the communications parameters (baud rate, parity, data length and stop bits) specified in the communications program. It should be set up to transmit at 300, 1200, 2400, 4800, 9600, 14400, 28800, 33600 bps (bits per second) or higher.

The modem is on, set up properly but still does not transmit or receive data.
Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your systems V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com.

198
NOTE

If Something Goes Wrong

Wireless networking problems

Wireless networking problems

This section provides general troubleshooting tips for networking problems, specifically wireless (Wi-Fi) networking. The terms and concepts used assume a basic understanding of networks, and may be for more advanced users. If you need assistance or if you are not familiar with the terminology, please see Windows Help and Support or contact your computer technician. If your computer is equipped with an internal Wi-Fi adapter, verify that the Wireless antenna ON/OFF switch is ON (the wireless indicator light will be lit). Verify that your computer can detect access points or routers. If it can detect a Wi-Fi access point or router then it may be a configuration issue. To determine if your computer has an internal Wi-Fi adapter, check the device list in Device Manager (part of the Windows Control Panel, System and Security). Some Toshiba models may have a Wireless antenna ON/OFF switch even though they do not have an internal Wi-Fi adapter. Verify that signal strength is good using the utility provided with the Wi-Fi adapter. If another computer is on the same network, verify that it has network access, and can connect to the Internet. If, for example, the other computer cannot browse to a public Web site, the ISPs (Internet Service Provider) service may be disrupted. Verify that the Service Set Identifier (SSID), or network name, is correcti.e., that it matches the SSID assigned to the access point you are attempting to connect through. SSIDs are case-sensitive. Check the Windows Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by the Windows operating system, and that the driver is loaded. To access the Device Manager, click Start, Control Panel, System and Security, and then System. Carefully note any error messagesthese will be very helpful if you should confer with a support technician at a later time.

NOTE

If Something Goes Wrong

DVD operating problems

199

Use IPCONFIG to verify that the computer has a useful IP addressone other than the private address of 169.254.xxx.xxx assigned by Windows. 1 2 3 Click Start to open the Start menu. Type Cmd in the Search programs and files field. Enter IPCONFIG /ALL and press Enter.

The IP address for each active network adapter will be displayed. Connect your computer directly to your router or broadband modem, by plugging a standard CAT5 Ethernet patch cable (sold separately) into your computer's RJ45 Ethernet port. If your connection problem disappears, the problem lies in the Wi-Fi part of your network. If you have enabled any security provisions (closed system, MAC address filtering, Wired Equivalent Privacy [WEP], etc.), check the access point vendor's Web site for recent firmware upgrades. Problems with WEP keys, in particular, are frequently addressed in new firmware releases.

The Windows operating system wireless management utility does not work.
If you are using an external Wi-Fi adapter (an ExpressCard, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows operating system wireless management utility, in which case you must use the adapter's management utility. If the documentation that accompanies the adapter does not provide enough information to determine if this is the case, contact that vendor's support group for further advice.

DVD operating problems

If you experience a problem playing DVDs, you may be able to fix the problem yourself. For general problems playing a DVD title, try the following steps: 1 2 3 Verify that the disc is in a format that the drive supports. Ensure that the disc is properly inserted in the drive tray. Use the DVD Player software that came with your computer to view DVD movies.

200
4

If Something Goes Wrong

Develop good computing habits

Clean the disc and try again. A dirty drive can also cause audio problems. If you have tried several discs and all fail, consider sending your drive to an authorized service provider to get it cleaned. 5 Verify that your computer recognizes your optical disc drive by clicking Start, and then Computer. The optical disc drive should appear in the list. See Checking device properties on page 186 for instructions on using Device Manager to view the optical disc drive properties. Check the Toshiba Web site for new information on optical disc drives and their operation.

A blank screen appears while watching a DVD-ROM movie or title.

Change the setting for when to turn off the display using the following steps: 1 2 3 4 Click Start, Control Panel, System and Security, and then Power Options. Click Choose when to turn off the display in the left pane. To turn off the display, select Never in the drop-down lists. Click Save changes.

The screen saver runs while you are watching a movie or title.
If the screen saver is enabled, it runs on top of any movie or title you are watching. To disable the screen saver: 1 2 3 4 Right-click on the desktop and click Personalize in the menu. Click Screen Saver in the lower-right corner of the window. Select None from the Screen saver drop-down list. Click OK.

Develop good computing habits

Save your work frequently.
You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See Computing tips on page 95 for instructions.

If Something Goes Wrong

Develop good computing habits

201

On a regular basis, back up the information stored on your internal storage drive.
Use Windows to back up files, or the entire computer, to an optical disc, or external hard disk. Here are some ways you can do this: Use the Windows operating system to back up files or your entire computer to an optical disc, or external hard disk. Copy files to a rewritable external storage device. Connect your computer to the office network and copy files to your network partition.

Some people use a combination of these methods, backing up all files to tape weekly and copying critical files to diskette on a daily basis. If you have installed your own programs, you should back up these programs as well as your data files. If something goes wrong that requires you to reformat your internal storage drive and start again, reloading all your programs and data files from a backup source will save time.

Read the users guides.

It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together. Get familiar with all the users guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self-help books you can use to supplement the information in the manuals.

Data and system configuration backup in the Windows operating system

The Windows operating system offers some easy-to-use features for backing up your Windows settings and your datadocuments and other important files. Take advantage of these features to protect yourself from much more difficult and time-consuming restoration procedures, and to safeguard your valuable data from loss.

202

If Something Goes Wrong

Develop good computing habits

Saving system configuration with restore points

The System Restore feature of the Windows operating system quickly creates restore pointssnapshots of your Windows operating system configurationand saves them for later recall. If you experience problems after installing some new hardware or software, you can easily select a previously established Control Point to turn back the clock, restoring the Windows operating system to the state it was in just prior to the installation. This is much easier and more effective than uninstalling the hardware or software, which often leaves behind unwanted files and settings. It is also easy to undo a restore point selection, if you change your mind. Follow these steps to create a restore point using the System Restore utility: 1 2 Click Start, Control Panel, System and Security, and then System. In the left pane, click System protection. The System Protection tab of the System Properties window appears. 3 4 Click Create... In the input field, enter a name that is descriptive enough to be easily understood in the future, such as Before installing Brand X Accounting app. Then click Create. The Windows operating system creates the restore point, automatically stamps it with the current date and time, and displays a message that the restore point was successfully created. 5 Click Close. Then, at a later time, you can re-establish your Windows configuration using the saved restore point. To do this: 1 2 Click Start, All Programs, Accessories, System Tools, and then System Restore. Select Recommended restore or Choose a different restore point, and then click Next. The timestamp and description of each restore point is displayed.

If Something Goes Wrong

Develop good computing habits

NOTE

203

This list may contain restore points that you did not create. Restore points labeled System Checkpoint were automatically created by the Windows operating system. Other restore points may have been created automatically by applications when they were installed. If you selected Choose a different restore point in step 2, select the restore point you want to use, and then click Next. Verify that the restore point you selected is the correct one. If it is not, click Back to return to the previous step. Close all programs and save all open files. Click Finish, and then Yes to begin the system restore. Your Windows operating system configuration will now be restored to the state it was in when the chosen restore point was created, and then the computer will be automatically restarted.

3 4 5 6

Backing up your data or your entire computer with the Windows operating system
The most valuable component of your computer system is the data you create and store on its internal storage drive. Since problems with either hardware or software can make the data inaccessible or even destroy it, the next most valuable component of your computer system may be a recent backup of your data. Fortunately, the Windows operating system offers a convenient way to back up your computer or just your important files to optical disc drives, or hard drives. An external hard drive is recommended in case the internal storage drive fails. No additional software is required. Most of the optical disc drives built into recent Toshiba portable computer models can write to (or burn) as well as read from optical discs. External optical disc writers are also widely available. Follow these steps to back up your computer or files to optical discs, or a storage drive:
NOTE

You cannot back up the computer while running on battery power. Connect the AC adaptor before continuing. Prepare your backup target by connecting it and/or inserting a blank optical disc in the drive.

204
2 3 4

If Something Goes Wrong

Develop good computing habits

Click Start. Click Control Panel. Click Back up your computer under the System and Security heading. Follow the on-screen instructions to back up your files.

For more help, click Start, Help and Support, and search for back up files.

General tips for installing hardware and software

Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe Photoshop, or utility software such as special toolbars for your web browser). Create a restore point (refer to Saving system configuration with restore points on page 202). Before installing anything, use the System Restore utility to set a restore point (see the section titled restore points). If anything goes wrong, you will then be able to easily restore the Windows operating system to the state it was in prior to the installation, undoing any changes that the installation process introduced. Back up your critical data (see Backing up your data or your entire computer with the Windows operating system on page 203). Have your back up DVD(s) on hand in case you need any files from them. Do not guessfollow directions carefully! It is often necessary to run an installation utility firstbefore connecting a new hardware item to the computer. If the device is connected first, it may be very difficult to complete the installation successfully. Always carefully follow the installation instructions that accompany the hardware or software. Restart the Windows operating system. Always restart the Windows operating system after each installation, even if the installation utility does not prompt you to do so. This will ensure that the installation is completed, and will clean up anything that the installation utility left behind.

If Something Goes Wrong

Develop good computing habits

205

Do one installation at a time. If you have several new items to add to your computer system, install just one at a time, creating restore points immediately before each successive installation. This will make it much easier to determine the origin of any new problems. For best results, follow this sequence: 1 2 3 4 5 Back up critical data. Create a restore point. Install one item of hardware or software. Restart the Windows operating system. Use the new hardware or software for a while, noting any new problems. Make sure that your critical applications (email, business applications, etc.) are working correctly, and verify that important devices are still functioning. For each additional hardware or software item, repeat these steps, starting at step 1 if any of your critical data has changed, or starting at step 2 if no critical data has changed.

Cannot use the USB Sleep and Charge function.

The setting of USB Sleep and Charge function may be Disabled. Change the setting to Enabled. Some external devices may not be able to use the USB Sleep and Charge function. In this case, please try one or more of the following methods. Change the Enabled mode setting. Turn OFF the computer while external devices are connected. Connect external devices after turning OFF the computer.

If this function cannot be used, change the setting to Disabled. Make sure that you are connected to a compatible port. When the USB Sleep and Charge function is set to Enabled the USB Wakeup function does not work for ports that support the USB Sleep and Charge function. In that case, use a USB port that does not have the USB Sleep and Charge function-compatible icon ( ), if you have a non-Sleep and Charge USB port available or disable the USB Sleep and Charge function. For more information, see USB Sleep and Charge Utility on page 161.

The USB Wakeup function does not work.

206

If Something Goes Wrong

If you need further assistance

If you need further assistance

If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance. This section contains the steps to take to ask for help.

Before you contact Toshiba

Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: Review the troubleshooting information in your operating system documentation. If the problem occurs while you are running a program, consult the programs documentation for troubleshooting suggestions. Contact the software companys technical support group for their assistance. Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information.

For the detailed specifications for your computer, visit pcsupport.toshiba.com. Click Product Support, search for your model, and then click Detailed Specs.

Contacting Toshiba
If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you.

Toshibas Technical Support Web site

For technical support, or to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com.

Toshiba voice contact

Before calling Toshiba, make sure you have: Your computers serial number The computer and any optional devices related to the problem Backup copies of your Windows operating system and all other preloaded software on your choice of media

If Something Goes Wrong

Other Toshiba Internet Web sites

207

Name and version of the program involved in the problem along with its installation media Information about what you were doing when the problem occurred Exact error messages and when they occurred

For technical support, call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273

Other Toshiba Internet Web sites

toshiba.com laptops.toshiba.com accessories.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm pcsupport.toshiba.com

Worldwide Toshiba corporate site Marketing and product information in the USA Accessories information in the USA Canada Europe Japan Mexico and all of Latin America

Toshibas worldwide offices

Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia France Toshiba Systmes (France) S.A. 7, Rue Ampre; B. P. 131 92800 Puteaux Cdex France Italy Centro Direzionale Colleoni Palazzo Perseo Via Paracelso 10 20041, Agrate Brianza Milano, Italy Canada Toshiba Canada Ltd. 191 McNabb Street Markham, Ontario L3R - 8H2 Canada Germany Toshiba Europe GmbH Leibnizstrae 2 D-93055 Regensburg Germany Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan

208

If Something Goes Wrong

Toshibas worldwide offices

Mexico Toshiba de Mxico S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF.

Latin America and Caribbean Toshiba America Information Systems 9740 Irvine Blvd. Irvine, California 92618 USA 800-457-7777 (within the US) 949-859-4273 (outside of the US this call may incur long-distance charges) Spain Toshiba Information Systems (Espaa) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States

United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge, Surrey KT15 2UL United Kingdom The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany

For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.

Appendix A

Hot Keys/TOSHIBA Cards

Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. There are two types of TOSHIBA Cards: Hot Key Cards and Application Cards.

Hot Key Cards

The Hot Key Cards are used to set or modify the following system functions: Mute Lock (Instant security) Power Plan Sleep Hibernation Output (Display switch) Brightness control Wireless TouchPad Zoom (Display resolution)

209

210

Hot Keys/TOSHIBA Cards

Hot Key Cards

Using the Hot Key Cards

The Hot Key Cards are normally hidden from view. The Cards appear when you press the Fn key.
NOTE

Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls.

To use the Hot Key Cards: 1 Press and hold the Fn key. The TOSHIBA Cards appear along the top of the screen.

(Sample Image) Hot Key Card display 2 Select the desired option. The selected Card is displayed full-size with its available options below it. All other Cards are again hidden from view. To use a Hot Key Card using a hot key: 1 2 Press and hold the Fn key. Press the hot key associated with the desired function. The associated hot key card appears at the top of the screen with its available options below it. 3 To cycle through the displayed options, hold down Fn and press the hot key repeatedly. Release the Fn key when the desired option is selected.

Hot Keys/TOSHIBA Cards

Application Cards

211

Application Cards
The Application Cards are used to launch these applications: TOSHIBA Assist For more information, refer to TOSHIBA Assist on page 143. TOSHIBA HDD Protection utility For more information, refer to TOSHIBA HDD Protection Utility on page 157. PC Diagnostic Tool utility For more information, refer to TOSHIBA PC Diagnostic Tool Utility on page 156. ConfigFree utility For more information, refer to ConfigFree on page 175. Bluetooth settings This Application Card launches your Bluetooth settings. TOSHIBA Zooming utility For more information, refer to TOSHIBA Zooming Utility on page 165. Disc Creator utility This Application Card launches the TOSHIBA Disc Creator utility. TOSHIBA Hardware Setup utility For more information, refer to TOSHIBA Hardware Setup on page 159. TOSHIBA Button Support utility For more information, refer to TOSHIBA Button Support on page 166.

212
NOTE

Hot Keys/TOSHIBA Cards

Application Cards
Not all functions are supported on all models.

Using the Application Cards

To launch an application using the Application Cards: 1 Press and hold the Fn key. The TOSHIBA Cards display at the top of the screen.

stacked Card

(Sample Image) TOSHIBA Card display 2 Click the stacked card on the far right of the display. The Application Cards are hidden under this card. The Application Cards appear, and the Hot Key Cards are stacked under the Card on the far left.

(Sample Image) Application Card display 3 4 Click the Card for the application Card to appear. Click the full-size Card to launch the application.

Hot Keys/TOSHIBA Cards

Hot key functions

213

Card Case
The Card Case feature allows you to choose which cards appear in the Application Card display (see Using the Application Cards on page 212). To use the Card Case: 1 Click Start, All Programs, TOSHIBA, Utilities, and then Settings for Flash Cards.

(Sample Image) Enabling and Disabling Application Cards 2 3 Click the Open cards case button. The Card Case displays two rows of Cards. Cards that appear solid (not transparent) in the bottom row are enabled and can be selected when the Application Cards are displayed. The top row contains all of the disabled cards. To enable a card, drag it from the top row to the bottom row. To disable the card, drag it from the bottom row to the top row. To close the Card Case, click the icon in the top corner of the screen.

4 5

Hot key functions

Hot key functions are performed using either the Hot Key Cards or by pressing the associated hot key. This section lists the available hot key functions.
NOTE

Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls.

214

Hot Keys/TOSHIBA Cards

Hot key functions

Volume Mute
This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones.
or Fn +

Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Volume Mute options To enable mute, select To disable mute, select . .

Hot Keys/TOSHIBA Cards

Hot key functions

215

Lock (Instant security)

This TOSHIBA Card or hot key blanks the display. Selecting this Card or pressing the hot key displays the following options:
or Fn +

(Sample Image) Security options To enable lock, select To cancel, select . .

The Fn + F1 hot key function activates instant security. The user logon screen will appear and a user with a valid account will need to log back on to gain access to the computer.

216
Power plan

Hot Keys/TOSHIBA Cards

Hot key functions

This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options window. Selecting this Card or pressing the hot key displays the currently selectable power plans:

or Fn +

(Sample Image) Power Plan options Cycle through the power plans, then select the desired power plan.

Hot Keys/TOSHIBA Cards

Hot key functions

217

Sleep mode
This TOSHIBA Card or hot key places the computer into Sleep mode. For more information about Sleep mode, please see Using and configuring Sleep mode on page 90.
or Fn +

Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Sleep options To enable Sleep mode, select To cancel, select . .

218

Hot Keys/TOSHIBA Cards

Hot key functions

Hibernation mode
This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see Using and configuring Hibernation mode on page 87. Selecting this Card or pressing the hot key displays the following options:

or Fn +

(Sample Image) Hibernation options To enable Hibernation mode, select To cancel, select . .

Hot Keys/TOSHIBA Cards

Hot key functions

219

Output (Display switch)

This TOSHIBA Card or hot key cycles through the power-on display options (only the first option is available when you do not have an external monitor attached) (the last option is available only if you are in Extended Display Mode).
NOTE

or Fn +

Some modes are only available with the appropriate device attached and turned on.

Built-in display only Built-in display and external monitor simultaneously External monitor only TV (or other external video device) only External monitor and TV simultaneously Built-in display and TV (or other external video device) simultaneously Built-in display and external monitor (extended desktop) Built-in display and TV (extended desktop) External monitor and TV (extended desktop) Swap-Switch primary display between internal display and external monitor when using extended desktop

To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Display mode options window

220

Hot Keys/TOSHIBA Cards

Hot key functions

Cycle through the display modes, then select the desired mode. Not all functions are supported on all models.

NOTE

Some systems also support an additional Swap Image Display mode. This mode is available only if the current setting is an extended desktop mode (Built-in Display and External Monitor, or Built-in Display and TV). In extended desktop mode, the image is split into two sides, one side per display device. To swap sides, select Swap Image Display.

Display brightness
This TOSHIBA Card decreases or increases the screen brightness.

Fn +

This hot key decreases the screen brightness.

Fn +

This hot key increases the screen brightness.

Selecting this Card or pressing either hot key displays the following options:

(Sample Image) Display brightness Move the slider or press the appropriate hot key repeatedly to decrease or increase the display brightness.

Hot Keys/TOSHIBA Cards

Hot key functions

221

Disabling or enabling wireless devices

This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are:
or Fn +

Wi-Fi enabledEnables just the Wi-Fi module. Bluetooth* enabledEnables just the Bluetooth* module. All disabledDisables the Bluetooth*, and WiFi modules. All enabledEnables the Bluetooth*, and Wi-Fi modules.

Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Wireless communication options To enable Wi-Fi, select

. .

To enable Bluetooth *, select To enable all, select To disable all, select To cancel, select . . .

*Available on certain models.

222

Hot Keys/TOSHIBA Cards

Hot key functions

Disabling or enabling the Toshiba Dual Pointing Device

This TOSHIBA Card or hot key enables/disables the Toshiba Dual Pointing Device. For more information on using the Toshiba Dual Pointing Device, see Using the Toshiba Dual Pointing Device on page 77. Selecting this Card or pressing the hot key displays the following options:

or Fn +

(Sample Image) Disable or Enable Toshiba Dual Pointing Device options To enable the TouchPad, select To disable the TouchPad, select . .

Hot Keys/TOSHIBA Cards

Hot key functions

223

Zoom (Display resolution)

This TOSHIBA Card or hot key switches screen resolution. Selecting this Card or pressing the hot key displays the following options:
or Fn +

[Space bar]

(Sample Image) Screen resolution options Cycle through the screen resolutions, then select the desired resolution.

Keyboard hot key functions

Fn +

This hot key turns the TOSHIBA Zooming Utility to zoom out.

Fn +

This hot key turns the TOSHIBA Zooming Utility to zoom in.

Appendix B

Power Cord/Cable Connectors

Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world.

USA

Canada

UL approved CSA approved

United Kingdom

Europe
VDA approved NEMKO approved

BS approved

Australia

AS approved

224

Glossary
TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer.

Acronyms
The following acronyms may appear in this users guide. AC BIOS bps CD CD-ROM CD-RW CMOS COM1 COM2 CPU DC DMA DIMM alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor communications port 1 (serial port) communications port 2 (serial port) central processing unit direct current direct memory access dual inline memory module

225

226
DPI

Glossary

DOS DSTN DVD ECP EPROM eSATA FAT FCC GB HDD HDMI

disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory external Serial Advanced Technology Attachment file allocation table Federal Communications Commission gigabyte hard disk drive High-Definition Multimedia Interface Electronics Control

DVD-ROM digital versatile (or video) disc read-only memory

HDMI-CEC High-Definition Multimedia Interface Consumer

HTML IEEE I/O IRQ ISP KB LAN LCD LED LPT1 LSI MB MIDI PC PCI
PCMCIA

Hypertext Markup Language Institute of Electrical and Electronics Engineers input/output interrupt request Internet service provider kilobyte local area network liquid crystal display Light Emitting Diode line printer port 1 (parallel port) large-scale integration megabyte Musical Instrument Digital Interface personal computer Peripheral Component Interconnect Personal Computer Memory Card International Association

Glossary

227

RAM RFI RGB ROM RTC SCSI SD SDRAM SRAM SSD SVGA TFT USB URL WAN www

random access memory radio frequency interference Red, Blue, Green light (monitor) read-only memory real-time clock small computer system interface Secure Digital synchronous dynamic random access memory static random access memory Solid State Drive super video graphics adapter thin film transistor universal serial bus uniform resource locator wide area network World Wide Web

Terms
The following terms may appear in this users guide.

active-matrix display A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a TFT display, in its simplest form there is one thin film transistor (TFT) for each cell. This type of display works well with computers because of its shallow depth and high-quality color. Active-matrix displays are viewable from wider angles than most passive-matrix displays. adapter A device that provides a compatible connection between two units. For example, the computers internal display adapter receives information from the software and translates it into images on the screen. An adapter can take a number of forms, from a microprocessor to a simple connector. An intelligent adapter (one that is capable of doing some processing) may also be called a controller.

228

Glossary

alternating current (AC) The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program.

backup A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS) See BIOS. baud rate The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second). See also bits per second. BIOS (basic input/output system) Basic instructions, stored in readonly memory (ROM), containing the information the computer needs to check hardware and load the operating system when you start up the computer. bits per second (bps) A way of measuring the speed at which information is passed between two devices. This is the basic unit of measure used in modem communications, and is similar, but not identical, to the baud rate. See also baud rate. boot To start the computer. The term boot originates from bootstrap program (as in pulling itself up by its bootstraps), a program that loads and initializes the operating system. See also reboot. boot disk See system disk. boot priority (startup sequence) The order in which the computer accesses its internal storage drives to locate the startup files. Under the default startup sequence, the computer looks for the startup files in the diskette drive before checking the internal storage drive. bus An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed The speed at which the central processing unit (CPU) communicates with the other parts of the computer.

Glossary

229

cache A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computers main memory. See also CPU cache, L1 cache, L2 cache. CD An individual compact disc. See also CD-ROM. CD-ROM (compact disc read-only memory) A form of highcapacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM. central processing unit (CPU) The chip that functions as the brain of the computer. It takes information from outside sources, such as memory or keyboard input, processes the information, and sends the results to another device that uses the information. character Any letter, number, or symbol you can use on the computer. Some characters are non-printing characters, such as a paragraph break in a word-processing program. A character occupies one byte of computer storage. chip A small piece of silicon containing computer logic and circuits for processing, memory, input/output, and/or control functions. Chips are mounted on printed circuit boards. click To press and release the pointing devices primary button without moving the pointing device. In the Windows operating system, this refers to the pointing devices left button, unless otherwise stated. See also double-click. color palette A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured). controller A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU See central processing unit (CPU).

230

Glossary

CPU cache A section of very fast memory residing between the CPU and the computers main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor An on-screen symbol (usually a flashing vertical line) that indicates the position where characters will appear when you enter data.

default The setting selected by a program when the user does not specify an alternative setting. device A component attached to the computer. Devices may be external (outside the computers case) or internal (inside the computers case). Printers, disk drives, and modems are examples of devices. device driver A program (called a driver) that permits a computer to communicate with a device. dialog box An on-screen window displayed by the operating system or a program giving a direction or requesting input from the user. direct current (DC) The type of power usually supplied by batteries. DC flows in one direction. Compare alternating current (AC). direct memory access (DMA) A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory See folder. disable To turn a computer option off. See also enable. disc A round, flat piece of material, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads.

Glossary

231

diskette A thin, flexible disk in a protective jacket that stores magnetically encoded data. Diskettes can be removed from the computer and come in two sizes: 5.25-inch and 3.5-inch. Your computer uses 3.5-inch diskettes. See also double-density diskette, high-density diskette. document Any file created with an application and, if saved to disk, given a name by which it can be retrieved. See also file. double-click To press and release the pointing devices primary button rapidly twice without moving the pointing device. In the Windows operating system, this refers to the pointing devices left button, unless otherwise stated. double-density diskette A 3.5-inch diskette that can hold up to 720 KB of information (half the capacity of a high-density diskette). See also diskette, high-density diskette. download (1) In communications, to receive a file from another computer through a modem or network. (2) To send font data from the computer to a printer. See also upload. drag To hold down the mouse button while moving the pointer to drag a selected object. In the Windows operating system, this refers to the left mouse button, unless otherwise stated. driver See device driver. DVD An individual digital versatile (or video) disc. See also DVDROM. DVD-ROM (digital versatile [or video] disc read-only memory) A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM.

emulation A technique in which a device or program imitates another device or program. enable To turn on a computer option. See also disable. executable file A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device A device that connects to a computer to expand its capabilities. Other names for an expansion device are port expander, port replicator, docking station, or network adapter.

232
F

Glossary

extension See file extension. external device See device. file A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. file allocation table (FAT) The section of a storage drive that keeps track of the location of stored files. file name A set of characters that uniquely identifies a file within a particular folder. It consists of two parts: the actual name and the file name extension. See also file extension. file extension The three characters following the period (pronounced dot) at the end of a file name. The extension indicates the type of file. Examples are .exe for program files and .hlp for help files. See also file name. folder Also called directory. A container for organizing files saved to a disk. A folder is symbolized on screen by a graphical image (icon) of a file folder. A folder can contain files and other folders. format (verb) To prepare a blank disk for use with the computers operating system. Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it. frontside bus The primary pathway (bus) between the CPU and the computers main memory. Also called system bus. See also bus. function keys The keys labeled F1 through F12, typically located on the keyboard. Their function is determined by the operating system and/or individual programs.

G H

ground A conductor to which all components of an electric circuit are connected. It has a potential of zero (0) volts, is connected to the earth, and is the point of reference for voltages in the circuit. hard disk A storage device composed of a rigid platter or platters that can be magnetically coded with data. Hard disks hold much more information than diskettes and are used for long-term storage of programs and data. The primary (or only) hard disk in a computer is usually fixed, but some computers have secondary hard disks that are removable.

Glossary

233

hardware The physical components of a computer system. Compare software. Hibernation A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off. See also Sleep, Suspend. high-density diskette A 3.5-inch diskette that holds 1.44 MB of data. See also diskette. hot key (1) A feature in which certain keys in combination with the Fn key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. hot swapping The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change.

icon A small image displayed on the screen that represents a function, file, or program. interlaced A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device See device. Internet The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web.

K L

keyboard shortcut A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse. L1 (level one) cache Memory cache built into the processor to help improve processing speed. See also cache, CPU cache, L2 cache. L2 (level two) cache Memory cache installed on the motherboard to help improve processing speed. It is slower than L1 cache and faster than main memory. See also cache, CPU cache, L1 cache.

234

Glossary

LAN (local area network) A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network. LED (Light Emitting Diode) A solid state lamp (SSL) that uses light-emitting diodes (LEDs) as the source of light, which offers long life and high efficiency output. Multiple diodes are used together, since the light created by individual light-emitting diodes is small compared to incandescent and compact fluorescent lamps. liquid crystal display (LCD) A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it. A filter over the electrodes permits only non-polarized light to pass to the surface of the display, creating light and dark pixels. load To move information from a storage device (such as a hard disk) into memory for processing. local area network See LAN. logical drive A section of a disk that is recognized by the operating system as a separate disk drive. A systems logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives.

memory Typically refers to the computers main memory, where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM. A computers main memory is RAM. See RAM, ROM. microprocessor See central processing unit (CPU). MIDI (Musical Instrument Digital Interface) A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem Short for modulator/demodulator. A device that converts information from digital to analog, and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.

Glossary

235

motherboard The computers main circuit board that contains the processor, memory, and other primary components. MS-DOS prompt See system prompt. multi-function drive A DVD drive that can read and write to CD and DVD media. multimedia A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface See MIDI.

network A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail. non-interlaced A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk A disk for storing programs and data that cannot be used to start the computer. Compare system disk.

online Available through the computer. Online may refer to information being read from your own computers internal storage drive, such as online documentation or online Help, or to information coming from another company on a company network or the Internet. operating system A set of programs that controls how the computer works. Examples of operating systems are the Windows Vista Home Basic and Windows 7 operating systems. optical disc drive A drive which reads plastic coated discs on which information is recorded digitally, and uses a laser to read data, music, or videos.

palette See color palette. parallel Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device. Most modern printers are parallel. Compare serial.

236

Glossary

password A unique string of characters entered by a user to verify his or her identity to the computer or the network. PC Card A credit-card-sized expansion card designed to increase the capabilities of computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter. peripheral Any device, such as a printer or joystick, that is attached to the computer and controlled by the computers CPU. pixel Short for picture element. The smallest dot that can be produced on a screen or printer. Plug and Play Generally, refers to the computers ability to automatically configure itself to work with peripheral devices. When capitalized, refers to a standard that, when followed by a device manufacturer, allows a computer to configure itself automatically to work with the device. pointer An icon (usually an arrow) that moves on the screen when you slide your finger across the TouchPad or move a mouse. Used to point to and select/activate on-screen items, such as icons, menu items, and buttons. The shape and purpose of the pointer varies depending on the program you are using and what you are doing. pointing device Any device, such as the TouchPad or a mouse, that enables you to move the pointer on the screen. port A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor See central processing unit (CPU). program A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties The attributes of an object or device. For example, the properties of a file include the files type, size, and creation date.

RAM (random access memory) Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer. This type of memory is used for your computers main memory. See also memory. Compare ROM.

Glossary

237

random access memory See RAM. read-only memory See ROM. reboot See boot, restart. removable disk A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically. restart Synonymous with reboot. To reset the computer by reloading the operating system without turning the computer off. See also boot. RGB (Red, Green, Blue) monitor A monitor that reproduces all colors by mixing red, green, and blue light in various combinations. RJ11 connector A modular connector used on most U.S. telephone systems and direct-connect modems. The RJ11 connector is a 6wire connector. RJ45 connector An eight-wire connector used to connect a computer to a network. ROM (read-only memory) Non-volatile memory that can be read but not written to. Non-volatile here means that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computers BIOS, which is essential instructions the computer reads when you start it up. See also BIOS, memory. Compare RAM.

Secure Digital (SD) A small, portable, non-volatile memory card used to store and transfer data between digital products, providing encryption capability for content security. select To highlight or otherwise specify text, data, or graphics with the intent to perform some operation on it. serial Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel.

238

Glossary

shortcut See keyboard shortcut. Sleep A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. software See program. Compare hardware. solid state drive A data storage device that utilizes solid-state memory as opposed to a hard disk (see hard disk). Much like hard disks, solid state drives hold much more information than diskettes and are used for storage of programs and data. Suspend A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. system disk A diskette that contains the operating system files needed to start the computer. Any diskette can be formatted as a system disk. A system disk is also called a bootable disk or a startup disk. Compare non-system disk. system prompt The symbol (in the MS-DOS operating system, generally a drive letter followed by a greater than sign) indicating where users are to enter commands.

T U

TFT display See active-matrix display. universal serial bus (USB) USB is a serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single allpurpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial. upload To send a file to another computer through a modem or network. See also download.
USB See universal serial bus (USB). USB Flash drive A small, portable flash memory card that plugs into

a computers USB port and functions as a portable hard drive. They are smaller and more durable than an external hard drive because they do not contain any internal moving parts, but have less storage capacity. See also universal serial bus (USB).

Glossary

239

utility A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management.

Web See World Wide Web. Wi-Fi A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) The worldwide network of Web sites linked together over the Internet. A user of the Web can jump from site to site regardless of the location of the computer hosting the site. See also Internet.

Index
A
AC adaptor 45 AC power (DC-IN) connecting adaptor 46 AC power light 45 Alt keys 97 Application Cards 211 audio files 135 audio features 135 not charging 188 notifications 118 power plan 216 power plan hot key 121 real-time clock (RTC) 113, 115 remaining power 117 removing 123 safety precautions 125 BIOS Setup see TOSHIBA Hardware Setup button power 49 start 131 buttons eject, optical disc drive 105 Media control buttons 105

B
backing up files 95 battery Call2Recycle 128 changing 122 charge indicator light 46, 116 charge not lasting 188 charging 47, 114 conserving power 119 disposal 127 installing 122, 124 low charge 118 maintaining 126 monitoring power 46, 116

C
Call2Recycle battery 128 changing main battery 122 character keys 96 charging the battery 47 checking device properties 186

240

Index

241

click 78 communications network connection 133 set up 132 computer caring for 93 cleaning 93 moving 94 non-system disk or disk error message 181 not accessing disk drives 181 running on battery power 112 setting up 44, 52 warning resume failure message 181 computer lock 94 computing tips 95 ConfigFree 175 Connectivity Doctor 176 profile settings 177 starting 176 connecting AC adaptor 45 monitor 79 power cord/cable 46 printer 81 projector 79 connection set up 133 Ctrl keys 97

Disk Defragmenter 192 disk drive corrupted/damaged data files 192 missing files/trouble accessing a drive 191 running slow 192 diskette drive cannot insert a diskette 192 cannot read a diskette 192 display does not look normal/flickers 190 external monitor not working 190 display devices external 79 display output settings 80 display panel opening 48 display problems screen is blank 189 display, external adjusting 81 disposal information 27 disposing of used batteries 127 double-click 78 DVD using 104 DVD player general problems 199

E
EasyGuard 112 eject button optical disc drive 105 eject, optical disc drive 105 ENERGY STAR 36 error messages non-system disk or disk error 181 problem with display settings/ current settings not working with hardware 190 warning resume failure 181 Error-checking 191

D
desktop creating new icon 130 major features 130 desktop exploration 129 desktop icons 130 Device Manager 186 checking properties 186 devices keyboard 81 mouse 81

242

Index

eSATA/USB combo port Using 141 exploring the desktop 129 ExpressCard 137 checklist 194 computer stops working 195 errors 196 hot swapping fails 196 inserting 137 not recognized 196 removing 138 ExpressCard problems 194 slot appears dead 195 external monitor not working 190 mouse 81 external display device Mini DisplayPort port 79 RGB (monitor) port 79 external display, adjusting 81

F
FAT (File Allocation Table) 191 file extensions 102 file, backing up 95 files backing up 103 printing 102 restoring 103 saving 100 fingerprint authentication 169 Fingerprint Authentication Utility using 169 Fn keys 97 function keys 97

Hibernation mode 83 configuring 87 hot key 218 starting again from 90 hot key disabling or enabling Toshiba Dual Pointing Device 222 disabling or enabling wireless devices 221 display brightness 220 Hibernation mode 218 keyboard overlays 223 Lock (Instant security) 215 Output (Display switch) 219 power plan 216 Sleep mode 217 volume mute 214 Zoom (Display resolution) 223 zooming in 223 zooming out 223 Hot Key Cards 209 Hot key functions 213 hot key power plan 121

I
icon 130 desktop 130 moving to desktop 130 recycle bin 130 safety 39 inserting ExpressCards 137 installation memory module 51 installing main battery 122, 124 memory modules 51 mouse 81 Internet bookmarked site not found 185 slow connection 185 URL address not found 185

H
headphones using 136 Help and Support Windows operating system 185

Index

243

J
jack RJ-11 134

K
keyboard character keys 96 function keys 97 hot keys 223 not working 180 special Windows keys 97 troubleshooting 189 unexpected characters 189 using 96 keyboard, external 81

removing 58, 59 memory module slot 53 microphone using 135 modem connecting to telephone line 134 problem solving 197 monitor connecting 79 monitor problems monitor not working 190 mouse installing 81 mouse utility 158

L
light AC power 45 drive in-use indicator 105 lock computer, using 94

N
network accessing 133 Connect to the Internet 133 networking wireless 132 notification area 132

M
main battery changing 122 installing 122, 124 removing 123 safety precautions 125 manual eject hole optical disc drive 105 memory adding 51 problem solving 187 removing memory module slot cover 53 Memory card reader inserting memory media 139 removing memory media 140 memory module installation 51 installing inserting into socket 55

O
optical disc handling 107 inserting 106 positioning 107 optical disc drive drive in-use indicator light 105 eject button 105 manual eject hole 105 problems 193 removing disc 109 troubleshooting 193 using 104 optical media recording 108 other documentation 40

P
password deleting a supervisor 151

244

Index

disabling a user 152 setting a user 151 supervisor set up 150 types 149 passwords instant, using 149 setting 149 port Mini DisplayPort 79 RGB 79 power computer will not start 180 connecting cable to AC adaptor 46 cord/cable 46 cord/cable connectors 224 energy-saving features 111 problem solving 187 turning on 49 power button 49 power plan hot key 121 power plans 120 power source connecting 46 powering down using Hibernate 88 using Sleep 90 precautions 42 primary button 77 printer connecting 81 problem solving 196, 197 printing a file 102 problem solving AC power 187 accessing disk drives 181 battery charge does not last 188 battery not charging 188 cannot insert diskette in drive 192 cannot read a diskette 192

changing display properties 190 checking device properties 186 computer hangs when ExpressCard inserted 195 computer will not power up 180 contacting Toshiba 206 corrupted/damaged data files 192 Device Manager 186 disk drive is slow 192 display is blank 189 ExpressCard checklist 194 error occurs 196 hot swapping fails 196 not recognized 196 ExpressCard checklist 194 ExpressCard slot appears dead 195 external display not working 190 external monitor 190 faulty memory 187 high-pitched noise 194 Internet bookmarked site not found 185 Internet connection is slow 185 keyboard not responding 180 keyboard produces unexpected characters 189 missing files/trouble accessing a drive 191 modem not receiving or transmitting 197 no sound 194 non-system disk or disk error 181 power and batteries 187 printer 196, 197 program not responding 179 program not working properly 192 screen does not look correct/ flickers 190

Index

245

Startup options 184 URL address not found 185 USB Sleep and Charge cannot use 205 USB Wakeup function does not work 205 warning resume failure 181 Windows operating system not working 183 program, starting 98 programs not running correctly 192 projector connecting 79

R
real-time clock (RTC) battery 113 recording sounds 135 recording sounds 135 recycle bin icon 130 registering computer 50 removing DVD with computer off 109 with computer on 109 ExpressCards 138 main battery 123 memory module 58 RJ-11 jack 134 running the computer on battery power 112

S
safety computer 128 disposing of batteries 127 icons 39 precautions 42 safety precautions main battery 125 saving files 100 screen

does not look normal/flickers 190 screen problems blank screen 189 Search programs and files field 100 secondary button 77 set up communications 132 setting up AC adaptor 45 adding memory 51 computer 44, 52 work environment 41 setting up a connection 133 Sleep mode 84 hot key 217 starting again from 93 Smart Card Reader 138 solid state drive (SSD) 106 sound problem solving 194 sounds recording 135 speakers using external 136 start button 131 starting a program 98 Search programs and files field 100 Windows Explorer 99 Windows Start menu 98 starting up the computer from Shut down 87 from Sleep 93 Startup menu problem solving 184 supervisor password, deleting 151 supervisor password, set up 150

T
taskbar 131 telephone line connecting to modem 134 television

246

Index

adjusting display 81 Toshiba registering computer 50 worldwide offices 207 TOSHIBA Accessibility 167 Toshiba accessories memory 51 TOSHIBA Application Installer 148 TOSHIBA Assist 143 TOSHIBA Button Support 166 Toshiba Dual Pointing Device 77 Toshiba EasyGuard 112 TOSHIBA eco power plan Using 122 TOSHIBA eco Utility 173 TOSHIBA Face Recognition Utility 153 TOSHIBA Hardware Setup 159 TOSHIBA HDD Protection Utility 157 Toshiba online resources 110 TOSHIBA PC Diagnostic Tool Utility 156 TOSHIBA PC Health Monitor 174 TOSHIBA Security Assist 154 TOSHIBA Service Station 174 TOSHIBA Zooming Utility 165 TouchPad control buttons 78 disabling 78 enabling 78 primary button 78 secondary button 78 using 77 traveling tips 128 troubleshooting DVD player general problems 199 external keyboard 189 keyboard 189 optical disc drive 193 Trusted Platform Module (TPM) 168

turning on the computer 49 turning on the power 49

U
USB Sleep and Charge cannot use 205 USB Sleep and Charge Utility 161 USB Wakeup function does not work 205 USB-compatible printer 81 user password, disabling 152 user password, setting 151 using display devices 79 ExpressCard 137 Memory card reader 139 Smart Card Reader 138 using a file extension 102 using the Toshiba Dual Pointing Device 77 Utilities 142

V
video projector adjusting display 81

W
warranty standard limited warranty 40 Web Camera using 136 Web sites 206 Wi-Fi wireless networking 132 Windows Explorer 99 Windows operating system Help and Support 185 problem solving 183 Windows operating system desktop 129 Windows Start menu 98 wireless networking 132

Index

247

Wizards Connect to the Internet 133 wizards Connect to the Internet 133