0% found this document useful (0 votes)
61 views41 pages

Wop PC

This document provides an overview of a Graphic Programming System software for CNC machines. It describes the installation, starting of the software, operating functions, and provides programming examples. It is intended to help users understand how to operate the software.

Uploaded by

picotechrus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
61 views41 pages

Wop PC

This document provides an overview of a Graphic Programming System software for CNC machines. It describes the installation, starting of the software, operating functions, and provides programming examples. It is intended to help users understand how to operate the software.

Uploaded by

picotechrus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 41

Graphic Programming System

on PC
Software Version 6
Environment Description 07.98 Edition

User Documentation
SINUMERIK 840C / OEM Version Windows

General Documentation User/Manufacturer/Service Docum.

ACR 20/
840C 840C Accessories
Accessories 805SM/840C
SINUMERIK SINUMERIK SINUMERIK SINUMERIK

Brochure Catalog NC 36 Catalog NC Z Link to SINEC L2-DP with


Module
 IM328-N, Slave
 IM329-N, Master and Slave

User Documentation

840/840C/ 840/840C/850/
840C 840C SINUMERIK
880/880 GA2 880/880 GA2 840C 840C
SINUMERIK SINUMERIK SINUMERIK SINUMERIK SINUMERIK SINUMERIK

Operator’s Guide Programming User’s Guide Cycles, Measuring Cycles User’s Guide
 OEM Version for Guide Graphic Programming System Programming Version 20 Simulation Milling
Windows  Drilling/Boring and Milling User’s Guide and Turning
Parts 1+2 Guide
 Standard
 Turning Parts 1+2
Diagnostics Guide  On PC
 Environment Description 840C

Manufacturer Documentation

840/840C/ 840/840C/
840C SINUMERIK
880/880 GA2 880/880 GA2
SINUMERIK 800 840C 840C
SINUMERIK SINUMERIK SINUMERIK SINUMERIK SINUMERIK SINUMERIK
840/880

Interface: Function Block PLC 135 WB/WB2/SD SINUMERIK Planning Guide OEM Version for
 Signals Packages Quick Reference, WS 800A Graphic Windows
 Connection Function Macros Planning  CL800 Cycle Programming System  User’s Guide
Conditions S5-HLL Language  Alarm Dialog
 User’s Guide for PC

Manufacturer Documentation Service Documentation

840/840C/850/
840C/ 840/840C/ 840/840C/ 840/840C/ 840/840C/850/
840/840C/
880/880
840D/611D
GA2 880/880 GA2 SINUMERIK
880/880 GA2 880/880 GA2
SINUMERIK 880/880
880/880GA2
GA2 840C
SINUMERIK SINUMERIK SINUMERIK SINUMERIK SINUMERIK SINUMERIK

Description of Computer Link Computer Link Installation Guide Measuring Cycles Spare Parts List
Functions  SINT  Message Frame  Instructions Version 20
 SIN PS 231 Description  Lists
Safety Integrated  SIN PS 315 Start-up Guide
 General Description  Difference Description
Windows
Introduction 1

Graphic Programming System


on PC Installation and Operation 2
Software Version 6

Environment Description
User Documentation

Programming Examples 3

Valid for
General 4
Control Software Version
SINUMERIK 840C/CE as from SW 4
(Standard/Export Version)

Index 5

07.98 Edition
SINUMERIK Documentation

Printing history

Brief details of this edition and previous editions are listed below.

The status of each edition is shown by the code in the “Remarks” column.

Status code in the “Remarks” column:

A . . . . New documentation.
B . . . . Unrevised reprint with new Order No.
C . . . . Revised edition with new status.
If factual changes have been made on the page since the last edition,
this is indicated by a new edition coding in the header on that page.

Edition Order No. Remarks


03.95 6FC5198–5AB10–0BP0 A
11.95 6FC5198–6AB10–0BP0 C
09.96 6FC5198–6AB10–0BP1 C
07.97 6FC5198–6AB10–0BP2 C
07.98 6FC5198–6AB10–0BP3 C

This manual is included in the documentation on CD–ROM (DOCONCD)


Edition Order No. Remarks
09.97 6FC5 298–6CA00–0BG0 (Read) C
09.97 6FC5 298–6CB00–0BG0 (Print) C
09.97 6FC5 298–6CC00–0BG0 (Net) C

Other functions not described in this documentation might be


Further information is available on the Internet under: executable in the control. This does not, however, represent an
http://www.a&d.siemens.de/sinumerik obligation to supply such functions with a new control or when
servicing.
This publication was produced with Interleaf V5.4.
We have checked that the contents of this document correspond to
the hardware and software described. Nonetheless, differences might
The reproduction, transmission or use of this document or its exist and therefore we cannot guarantee that they are completely
contents is not permitted without express written authority. Offenders identical. The information contained in this document is, however,
will be liable for damages. All rights, including rights created by patent reviewed regularly and any necessary changes will be included in the
grant or registration of a utility model or design, are reserved. next edition. We welcome suggestions for improvement.

 Siemens AG 1995, 1996, 1997, 1998 All rights reserved. Subject to changes without prior notice.

Order No. 6FC5198–6AB10–0BP3 Siemens–Aktiengesellschaft


Printed in the Federal Republic of Germany
Preliminary Remarks

The documentation for your Graphic Programming System is divided


into three parts.
S “User’s Guide for Graphic Programming System Part 1: Program-
ming Examples”
S “User’s Guide for Graphic Programming System Part 2: Operating/
Programming Functions”
S “Environment Description for Graphic Programming System”
This Environment Description of the Graphic Programming System
on PC describes
S installation,
S starting,
S special operating functions as well as
S operating procedures by way of examples.
Note Before using the functions with the Graphic Programming System you
should have worked through the programming examples in Part 1 and
carefully read through Part 2 of the User’s Guide.

The User’s Guide does not contain detailled


examples of all the functions provided by the system
and all possible operator actions.
For this reason, the Graphic Programming System
features a powerful help function that is available in
almost all operating situations.
Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1

2 Installation and Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1

2.1 How it is supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1


2.2 Hardware and software requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
2.3 Installation and starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
2.4 PC user interface and keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6
2.5 Special operating functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8
2.5.1 File functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8
2.5.2 Transmission functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–16
2.5.3 Data transmission from the PC to SINUMERIK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–17
2.5.4 Data transmission from the SINUMERIK to the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–19

3 Programming Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1

3.1 Workpiece new . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1


3.2 End WOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4

4 General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1

4.1 File environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2


4.2 Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4
4.3 Compatibility table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7

5 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1
03.95

1 Introduction

This User’s Guide describes the operator actions and programming


functions of the graphic programming system for a personal computer.
The automatically generated part program can, for example, be sent to
the CNC control using a data transmission program.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 1–1


SINUMERIK 840C (BN)
03.95
2.1 How it is supplied

2 Installation and Operation

Section 2 describes the installation and operation of the Graphic Pro-


gramming System on the PC in detail.

S The first part explains how the software is supplied to the user.
S The second part describes the required hardware and software on
your PC.
S The next section gives detailed instructions on how to install and
start the Graphic Programming System.
S The fourth part explains the user interface and the individual keys
that differ from those on the operator panel of the SINUMERIK 840C.
S The fifth section of the User’s Guide explains special operator ac-
tions on the PC.
This section describes
– file functions and
– transmission functions
that differ from those on the SINUMERIK 840C.

2.1 How it is supplied

SIEMENS supplies the software package for the Graphic Programming


System on PC
S up to SW 6.4 on 3 1/2” diskettes
S as from SW 6.5 on CD–ROM.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–1


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.98
2.2 Hardware and software requirements

2.2 Hardware and software requirements

Up to SW 6.4 The following list contains the minimum requirements for the system
environment.

Computer You require a personal computer with


S at least a 486 DX microprocessor,
S DOS Version 6.2 or higher,
S Microsoft Windows Version 3.1 or higher,
S a hard disk,
S a 3 1/2” disk drive,
S at least 8 MB RAM user memory
S a VGA graphics card with a screen resolution that can display at
least 16 colors and
S a monitor that is compatible with the graphics card being used.
Free memory space To install the Graphic Programming System,
on the hard disk
S you require at least 45 MB free memory space on an uncompressed
hard disk drive.
of this disk space the Graphic Programming System uses approx. 10
MB for the working area of the DOS extender.
Operating systems MS–DOS and Windows, Version 3.1, must already be installed on your
personal computer.
The Graphic Programming System can run under
S DOS as well as
S in a full–screen DOS window under Windows.
It is not possible to run the system in a window under Windows.
Basic settings The system takes the basic settings for the
S technology (turning or milling)
S language
S machine type and
S workpiece name
from a configuration file.
Use under Windows If the system is installed under Windows 3.11, the standard VGA driver
must be configured with 640x480 pixels for 16 colors.
Problems could arise if any other graphics drivers are used.
As from SW 6.5 Deviations from SW 6.4:
S Computers with operating system Windows 95 or Windows NT.
S at least 16 MB RAM user memory.
S CD ROM drive.
SW 6. 5 cannot be operated under DOS and Windows 3.11.

2–2  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.98 2 Installation and Operation
2.3 Installation and starting

2.3 Installation and starting


This section explains how you
S install and
S start
the Graphic Programming System on your personal computer.
Note The number of diskettes to be installed depends on the size of the or-
dered software.
Procedures Up to SW 6.4
Installing the Graphic 1. Call up Windows and select the Program Manager.
Programming System
2. Place diskette 1 in the corresponding drive.
3. Open the File menu.
4. Select the command Run.
This opens the dialog box “Run”.
5. Enter: [Drive]:\setup in the command line.
Confirm with the Input key.
Proceed now according to the instructions as described in Fig. 2.1.
As from SW 6.5
1. You are on the operator interface of WIN 95/WIN NT.
Place the CD ROM in the corresponding drive.
2. Open the Explorer in the Start menu.
3. Start Setup\Install from the CD ROM.
The following display appears:

of for
C

Fig. 2.1 Installing a Graphic Programming System on PC

Select the target drive (without details of the directory) in the menu
displayed and confirm with the Input key (Continue).

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–3


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.97
2.3 Installation and starting

The software must not be installed in a subdirectory.

Once you have started the installation program from diskette 1, the fol-
lowing menu appears:

Installation of WOP T/M for PC

Fig. 2.2 Menu for installing the Graphic Programming System

Select the components that you wish to install:


S All the possibilities are displayed in the field “to install”.
S Click Remove (the selected component is transferred to the field “to
ignore”) if you do not require a component or language.
S Once you have deselected all the components that you do not re-
quire, click Continue.
S If you make a mistake or if you repeat the setup routine you can
mark the deselected components in the field “to ignore” and put
them into the field “to install” by clicking Add.
As soon as all the required components are listed in the field “to
install” you can click Continue.
If you have made the following selection:

Fig. 2.3 Selection for English and German only

and clicked Continue twice, follow the instructions displayed on the


screen to change the diskettes (WIN 3.1).

2–4  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.98
07.97 2 Installation and Operation
2.3 Installation and starting

When you have completed installation, the following instruction is


displayed (only with WIN 3.11!):
“End Windows and select directory \WOP and execute command:
install.bat”. Execute these operations.
Procedures First start up Windows.
Starting the Graphic The Graphic Programming System generates a WOP–T/M program
Programming System group on the Windows user interface.

Fig. 2.4 WOP–T/M program group with the applications WOP and PCIN

The program group contains the applications


S graphic programming (WOP–T_M) and
S data transmission (PCIN).
Starting under Win- If you are starting the Graphic Programming System under Windows go
dows into the program group and press the following key combination:
1. Double click the WOP–T_M icon with the mouse to activate the
Graphic Programming System or select START/PROGRAMS/
WOP–T_M under WIN 95/WIN NT.
Note:
If you install the system with several languages and with the turning
and milling options, then the last of these to be installed will be ac-
tive when the system is started up for the first time.
2. You can return to the Windows user interface by pressing Alt–Esc
(the Graphic Programming System remains active in the back-
ground)
3. and, for example, call up the data transmission program PCIN by
double clicking on the PCIN icon with the mouse.
Starting under DOS The following conditions must be fulfilled if you wish to start the Graphic
(up to SW 6.4) Programming System under DOS:
You have added the following entries to your “autoexec.bat” file:

set path=%path%; [LW]:\wop


1. Enter the command “wop”
2. Start the Graphic Programming System by pressing the input key.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–5


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.97
07.98
2.4 PC user interface and keyboard

2.4 PC user interface and keyboard

If you have installed the software for the Graphic Programming System
for turning and no foreign language on your PC, then Fig. 2.5 below will
appear on screen when you start up the Graphic Programming System.

Fig. 2.5 Graphic programming on PC

The Graphic Programming System is operated on the PC via the PC


keyboard.
As from SW 6.5, operation via the mouse is possible in addition for se-
lected functions.

If you activate the Graphic Programming System


under Windows, you can return to Windows by
pressing Alt–Esc and then activate the transmission
program PCIN.
When you have completed the transfer operation
you can return to the Graphic Programming System
by pressing Alt–W.

2–6  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95 2 Installation and Operation
2.4 PC user interface and keyboard

The following table lists all the keys of the PC keyboard and the 840C
operator panel because User’s Guide “Part 1 and Part 2” uses the key
symbols of the operator panel.

840C General
op. panel PC keyboard function description

Press the function keys and then


Horizontal
activate the functions of the
softkeys ... horizontal softkeys (F1=left).
Press the <shift> key plus the
required function key on the PC
Vertical .. keyboard and then activate the
softkeys . functions of the vertical softkeys
(F1=topmost softkey).

With the help key you can call up a


windows containing a help text for
each horizontal softkey menu. This
window contains explanations of the
8 individual softkey functions. If a
dialog box is displayed on the
screen you can call up graphic help
about the parameters by pressing
this key.
The RECALL key aborts dialog
form entry, the system ignores any
entries that are made.
ESC The RECALL key closes the help
windows.
On the PC this function is performed
by the ESCAPE key.
You end dialog form entry and
accept the entries with the INPUT
key.
On the PC, this is the ENTER key
or the input key.
You can call up the calculator
Ctrl function with this key if a dialog box
is displayed on the screen and the
N cursor is positioned in a numerical
entry field.
With this key combination or key
Ctrl you can combine the individual work
schedule steps to a block.
N

If the cursor is positioned on a text


Ctrl selection field you can display the
texts in this field one after the other
N with this key combination or key.
(“TOGGLE”)

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–7


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.97
2.5 Special operating functions

840C General
op. panel PC keyboard function description

This key combination is used to


Ctrl view the part program you have
created. Press the ESCAPE key to
A quit this function.

2.5 Special operating functions

This PC version of the Graphic Programming System user interface


provides different programming functions to those of the SINUMERIK
840C.
This section describes
S file functions and
S transmission functions.

2.5.1 File functions


The following vertical softkey functions are important if you are working
with the Graphic Programming System on the PC (see Fig. 2.6):
S Save
S Read
The following section describes these functions in more detail as they
differ from those on the SINUMERIK 840C.
Section 2.5.2 “Transmission functions” describes the procedures of the
transmission functions
S File import
S File export
in detail.
The other functions are described in “Part 2: Operating/Programming
Functions” in the sections “Programming functions” and “Appendix”.

2–8  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.97 2 Installation and Operation
2.5.1 File functions

Menu tree Fig. 2.6 displays all the functions that are described in the table below
(shaded in grey) in the form of a menu tree:

1.1 1.6.1
Save Export
original workpiece
Save 1 1.2 1.6.2
Save Export
2.1 as magazine
2
Read Read 1.6.3
original Export
2.2 mach. type
3
Views Read
autosave
4 2.3
Screen Initialize 1.6.5
workpiece PCFloppy
5 2.4
Repre- Workpiece 1.6 1.6.6
sentation new File PC  NC
export
6 2.5
Program Machine 1.6.7
info type Delete
2.6 transfer
Program 7
File
steps import 2.6.1
Import
workpiece
2.6.2
Import
magazine
2.6.3
Import
mach. type

6.3 2.6.5
Contour
element FloppyPC
6.4
2.6.6
Contour
dist/angl NC  PC
6.5
2.6.7
System
status Delete
transfer
6.6
Log
functions
6.7
Collision
check

Fig. 2.6 Vertical functions: Save, Read

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–9


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.97
2.5.1 File functions

Functions This table only contains the functions that are displayed with a grey
background in Fig. 2.6. The other functions are described in the User’s
Guide “Part 2” in the “Appendix”.

Menu
tree Functions Function description
no.
1 Save The Save function branches into the subme-
nus
S Save original,
S Save as
S File export
1.1 Save You save the files belonging to the current
original workpiece.
1.2 Save You save the files belonging to the current
as workpiece under a new workpiece name.
1.6 File The function File export branches into the
export submenus
S Export workpiece
S Export magazine
S Export mach. type
S PC  floppy
S PC  NC
S Delete transfer
The Graphic Programming System loads the
exported files into a transfer directory.
1.6.1 Export You select a workpiece file and export it to the
workpiece transfer directory by pressing the input key.
1.6.2 Export You select a user magazine and export it to
magazine the transfer directory by pressing the input
key.
1.6.3 Export You select a machine type and export it to the
mach. type transfer directory by pressing the input key.
1.6.5 PC–>floppy The previously exported files are transferred
to a floppy disk.

2–10  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.97 2 Installation and Operation
2.5.1 File functions

Menu
tree Functions Function description
no.
1.6.6 PC–>NC The previously exported files are transferred
from the transfer file to the NC using the PCIN
program. A zero modem cable is required.
Note:
Data_in must be active on the NC.
1.6.7 Delete This erases the contents of the transfer direc-
transfer tory, for example, to import or export new files.
2 Read The function Read branches into the subme-
nus
S Read original
S Read autosave
S Initialize workpiece
S Workpiece new
S Machine type
S File import
2.1 Read origi- You read the last geometry file that you saved.
nal The geometry data generated in the graphics
display are lost.
2.2 Read The Graphic Programming System saves the
autosave geometry and machining you have
programmed at predefined intervals. This
interval can be viewed at any time using this
softkey.
2.3 Initialize All the geometry and machining data are lost.
workpiece You program Workpiece new under the same
name.
2.4 Workpiece You program a new workpiece under a new
new name.
Note:
If you want to save the old workpiece, press
Save/Save as.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–11


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
11.95
2.5.1 File functions

Menu
tree Functions Function description
no.
2.5 Machine
type

On each system start, the selections for


S the workpiece name,
S the machine
S the language and
S the programming system
are taken from the last session (see Sec-
tion 4.2, “Configurations”).
Operating sequence:
1. Select the softkey function
Machine type
2. Open a selection field with
this key
3. Make your selection using the
cursor keys
4. Complete your selection with
the input key.

Note:
When you change to a different program-
ming system (M or T), you must always se-
lect a new workpiece and a new machine
type or, when selecting a new machine type,
a new workpiece.

2–12  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.97 2 Installation and Operation
2.5.1 File functions

Menu
tree Functions Function description
no.
2.6 File import The function File import branches into the
submenus
S Import workpiece
S Import magazine
S Import machine type
S Floppy  PC
S NC  PC
S Delete transfer
The files transferred from the CNC are avail-
able for graphic programming once they have
been imported.
2.6.1 Import You transfer a workpiece file from the transfer
workpiece directory to the PC directory for graphic pro-
gramming on the PC.
2.6.2 Import You transfer a magazine file from the transfer
magazine directory to the PC directory for graphic pro-
gramming on the PC.
2.6.3 Import You transfer a magazine type from the transfer
mach. type directory to the PC directory for graphic pro-
gramming on the PC.
2.6.5 Floppy–>PC PC is ready to receive data from the floppy
disk. The data is loaded into the TRANSFER
tree, and the files are imported from there to
the system using:
S Import workpiece
S Import magazine
S Import type

Note:
The diskette contains data that have been
transferred in PC format on the NC with data
output. These data are unpacked to the
TRANSFER directory using the PCIN pro-
gram.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–13


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.97
2.5.1 File functions

Menu
tree Functions Function description
no.
2.6.6 NC–>PC The PC is ready to receive data from the NC.
The data is loaded into the TRANSFER tree,
and the files are imported from there to the
system using:
S Import workpiece.
S Import magazine.
S Import machine type.
A zero modem cable is required.
2.6.7 Delete This erases the contents of the transfer direc-
transfer tory, for example, to import or export new files.
6 Program This function provides you with information
info about
S elements created with the function Ori-
ented geometry or Construction
geometry
S the distance or angle between two ele-
ments (created using the function Oriented
geometry or Construction geometry
S system status
S the log functions
S collision check
6.6 Log func- The log functions branch into
tions
S Create log
S Play back log
S Append log
S Delete log
S Stop recording

2–14  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
11.95 2 Installation and Operation
2.5.1 File functions

Menu
tree Functions Function description
no.
6.6.1 Create log This function records your keyboard entries.
The operator actions previously recorded in a
log file are overwritten.
Note:
You must always start recording immediately
after you start up the Graphic Programming
System.
6.6.2 Play back log By pressing one of the keys, the Graphic Pro-
gramming System plays back the selected log
step by step.

You can control playback with the following


keys:

” )
2 2 ... 9 ] 2...9 = speed
=
0 } 0 = single steps
!
1 1 = highest
speed
*
+ ~
* = abort

Note:
Like the recording function, you must start this
function at the initial level when you start up
the system.
6.6.3 Append log This function continues a log already recor-
ded.
6.6.4 Delete log You delete the recorded operator actions.
6.6.5 Stop recording You terminate log recording.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–15


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.98
2.5.2 Transmission functions

2.5.2 Transmission functions


With the functions

File
export S File export (PC to CNC),

File
import S File import (CNC to PC) and

Data transmission
program PCIN
S the file transmission program PCIN
you can transfer files in PC format to the control or from the control with
the Graphic Programming System.
These transmission functions are described in this section of the User’s
Guide.

A detailed description of PCIN is to be found in the


Manufacturer Documentation
SINUMERIK 800
PCIN
Software Version 4
Data Transmission NC–PC
User’s Guide 08.96 Edition
Ident No. 48373403

Transfer It is important to remember that data transmission from the PC to the


directory SINUMERIK 840C is only possible with a transfer directory (e.g.
TRANSFER).
The name of this directory can be defined in a configuration file.
This file is called: “progsys1.cfg”.
The default setting in this file is “\TRANSFER”.
Note In the following section, the default name TRANSFER is used as the
name for the transfer directory.
You may, however, define a different name for this directory.
Please remember:
S the name of the transfer directory (TRANSFER) must be the same
as the name entered in the configuration file “progsys1.cfg”.

2–16  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.97 2 Installation and Operation
2.5.3 Data transmission from PC to SINUMERIK

2.5.3 Data transmission from the PC to SINUMERIK

The following is a description of


S data transmission from the PC to the SINUMERIK 840C or
S to another CNC of the system family 800.

Procedures You export the files of the Graphic Programming System


Data from the PC to
S to the transfer directory (e.g.: TRANSFER) and then
the SINUMERIK
840C S from the transfer directory to the CNC.

A
File [drive]:\TRANSFER
Export
copy

C B
PC PC
--> NC or --> floppy DATA_IN

or

diskette
PC CNC

Fig. 2.7 Data transmission from PC to CNC

Requirements You have activated the Graphic Programming System.


Fig. 2.7 A
First of all, press the softkey Save
Save

File and then use the File export function to individually copy the files you
export require (workpiece or tool or machine type) into the transfer file.
You export with the softkeys

Export Export workpiece or


workpiece

Export Export magazine or


magazine

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–17


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.97
2.5.3 Data transmission from PC to SINUMERIK

Export Export mach.type


mach.type all data to a an archive directory for data transfer, e.g. TRANSFER/
MMC.001/USER.005/WOP.006/TEST.016
With Export mach.type function, you transfer all data characterizing
the machine behaviour, for example:
S Screen forms
S Empirical value file
S Configuration file
S Graphics macro file
S NC macro file
Requirements You have exported files into a transfer directory.
You transfer these files from this transfer directory (e.g.: TRANSFER) to
the CNC.
Procedures
Fig. 2.7 B
1. You activate Services/Data_in on the SINUMERIK 840C and esta-
blish the cable connection for the data transfer or use a floppy disk.
Fig. 2.7 C

PC PC --> NC or
--> NC

PC PC --> Floppy
--> Floppy

2. After operation of the Save and File export softkeys, you start the
PCIN program on the PC by means of PC --> NC or PC --> Floppy.
3. The archive directory is selected automatically and packed in PC
format. The transfer is executed from the transfer directory with:
– Transfer PC --> NC
e.g. TRANSFER\MMC.001\USER.005\WOP.006\Test1.016
– Transfer PC --> Floppy
e.g. TRANSFER.001 (stored in drive A)

2–18  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.97 2 Installation and Operation
2.5.4 Data transmission from the SINUMERIK to the PC

2.5.4 Data transmission from the SINUMERIK to the PC

The following is a description of data transmission from the


SINUMERIK 840C to the PC.

C
File [drive]:\System
Import
copy

B
NC Floppy
--> PC or --> PC A
DATA_OUTPUT

or

diskette
PC CNC

Fig. 2.8 Data transmission from CNC to PC

Procedures The CNC files from the Graphic Programming System are transferred
Data from the
S to the automatically created transfer directory (e.g. TRANSFER) on
SINUMERIK 840C
the PC and then
to the PC
S from the transfer directory to the Graphic Programming System di-
rectory on the PC.
S You establish the cable connection for the data transfer or use a
floppy disk.
Fig. 2.8 A
1. The data of the CNC to be exported must be stored in an archive
directory named TRANSFER by means of Services/Data_output.
The extension .001 is automatically added to this file.
Fig. 2.8 B

NC NC --> PC or
--> PC

Floppy Floppy --> PC


--> NC
2. After operation of the read and File import softkeys, you start the
PCIN program on the PC by means of NC --> PC oder Floppy -->
PC.
The data is then output to the transfer area.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 2–19


SINUMERIK 840C (BN)
2 Installation and Operation 03.95
07.97
2.5.4 Data transmission from the SINUMERIK to the PC

Fig. 2.8 C To import these files into the directory for graphic programming
press the Read softkey
Read and then

File the File import softkey.


import Now you can import the files in question into the Graphic Programming
System with the

Import Import workpiece or


workpiece

Import Import magazine or


magazine

Import Import mach. type.


mach. type softkeys.
With Import mach.type function, you transfer all data characterizing
the machine behaviour, for example:
S Screen forms
S Empirical value file
S Configuration file
S Graphics macro file
S NC macro file
J

2–20  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
3.1 Workpiece new

3 Programming Examples

As an exercise, this section describes how to


S call up the graphic programming system and create a workpiece di-
rectory,
S terminate graphic programming and then
from the “Windows user interface”.

3.1 Workpiece new

Purpose of the The following section describes how you


exercise
S call up the graphic programming system and
S create a workpiece directory.
Initial situation You are at the Windows user interface level:
S You have installed the program group WOP–T/M.
S The program group contains the icon WOP–T_M.
Your starting point, for example, is the user interface shown in Fig. 3.1
(with Windows NT):

Fig. 3.1 Windows user interface with the WOP–T/M program group

Under WIN 95, start with START/PROGRAMS/WOP–T_M.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 3–1


SINUMERIK 840C (BN)
3 Programming Examples 03.95
07.98
07.97
3.1 Workpiece new

Procedures
You initiate graphic programming for turning by double clicking on the
WOP–T_M icon.
This activates the graphic programming system and the following dis-
play appears:

Fig. 3.2 Initial level of graphic programming on PC

Note The settings in the dialog box Machine type on each system start for
S the workpiece name (e.g. “DEMO001”),
S the machine (e.g. “TYP_A”),
S the languages (e.g.: “ENGLISH”) and
S the programming system (e.g.: “T” for turning)
are always those of the previous graphic programming session.
Exercise
The cursor is positioned in the selection field Workpiece ready for you
to create a new workpiece name.

Fig. 3.3 Selection field Workpiece

Press the ESCAPE key.


ESC
The graphic programming system displays the dialog box Create new
workpiece.

Create new workpiece


PART1

Fig. 3.4 Dialog box Create new workpiece

3–2  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.97 3 Programming Examples
3.1 Workpiece new

... ... ... To give the workpiece a new name, enter the name you wish to give the
workpiece using the alphanumeric keys, e.g.: “PART1”.

The name must be no longer than eight characters.

You confirm the name with the input key.

Note The workpiece name “PART1” is the generic term for all files created
under this workpiece.
Exercise For the first programming example (see User’s Guide “Part 1: Program-
ming Examples”) you have created
S under machine type “A” (directory name: “TYP_A.006”).
S a new workpiece directory “PART1” (directory name: “PART1.064”)
When you have completed the exercise, the created main program
“MPF1” is located under this workpiece directory
“..T.006\TYP_A.006\PART1.064”.

Continue the exercise in the User’s Guide


“Part 1: Programming Examples” starting from Sec-
tion “Graphic programming” from the level shown in
Fig. 3.5

Fig. 3.5 Graphic programming

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 3–3


SINUMERIK 840C (BN)
3 Programming Examples 03.95
07.97
07.98
3.2 End WOP

3.2 End WOP

Purpose of the The following section describes how you


exercise
S terminate graphic programming.
Initial situation You have programmed a part to be turned (User’s Guide “Part 1: Pro-
gramming Examples”)
The system displays the following turned part geometry in the graphic
area:

Fig. 3.6 Workpiece “Programming example 1”

Procedures Terminate graphic programming system by pressing the vertical softkey


End (corresponds to F7)

and, additionally, with WIN95/WIN NT with the button at the top


End right of the window.

The graphic programming system displays the dialog box Save work-
piece geometry ?
Place the cursor on the field yes.

Using the input key save the workpiece program and exit the graphic
programming system.

Note Once you have completed the function Create part program, the
graphic programming system stores the part program in your workpiece
directory (e.g. “PART1”). You do not have to save it yourself.

3–4  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95 4 General Notes

4 General Notes

Section 4 describes
S the file environment, gives
S configuration information and contains a
S compatibility table.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 4–1


SINUMERIK 840C (BN)
4 General Notes 03.95
07.98
4.1 File environment

4.1 File environment

Once you have installed the graphic programming system on your PC


according to the instructions given in Section 2.3, you create the files
as follows.
Two main directories
S [Drive]:\WOP with all system files and
S [Drive]:\840C with all workpiece files.
SIEMENS supplies the following PC software
S Graphic programming for turning (WOP–T_M) and
S PCIN data transmission program

This User’s Guide provides a description for WOP–T


(turning).

Transfer Please remember that file transfer from the PC to the SINUMERIK
directory 840C can only be performed if a transfer directory (e.g.: TRANSFER)
exists.
Section 2.5.2 “Transmission functions” describes how you create such
a directory.
The following table lists the file type together with its short designation
for the Turning Version:

File type Name or short designation in the file directory


(DR = drive)
Tool master [DR]:\WOP\T.006\WKZ.0161) or
data [DR]:\WOP\T.006\TYP_A.006\WKZ.0162)
User magazines [DR]:\WOP\T.006\TYP_A.006\*.0161)
Workpiece [DR]:\840C\T.006\TYP_A.006\*.0641)
directories
Empirical value file [DR]:\WOP\T.006\EXAM.033\erfahr.0341) or
[DR]:\WOP\T.006\TYP_A.006\EXAM.033\
erfahr.0342)
Configuring file [DR]:\WOP\T.006\EXAM.033\projekt.0341) or
[DR]:\WOP\T.006\TYP_A.006\EXAM.033\
projekt.0342)
Part program [LW]:\840C\T.006\TYP_A.006\*.064\mpf***.013 1)

Fig. 4.1 the next page shows some of the directories that are of impor-
tance to you.
Subdirectory “TYP_A” represents (for example) a created machine
type.

1) Standard file
2) File relating to the machine type (created by user)

4–2  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.98 4 General Notes
4.1 File environment

SINUMERIK 840C PC
[Drive]:\ [Drive]:\
...
mmc.001 WOP
... DBOS (up tp SW 6.4)
... M.006 (milling)

siem.069 ...

... ...

...
...
...
... T.006 wkz.016 (turning)
... EXAM.033 erfahr.034
projekt.034
...

ÉÉÉÉÉÉÉÉÉÉ
... ...

ÉÉÉÉÉÉÉÉÉÉ
... TYP_A.006 *.016

ÉÉÉÉÉÉÉÉÉÉ
wop.006 wkz.016
exam.033 erfahr.034

ÉÉÉÉÉÉÉÉÉÉ
EXAM.033 erfahr.034
projekt.034 projekt.034

ÉÉÉÉÉÉÉÉÉÉ
...
...
... TYP_XX.006 *.016
... 840C
...
user.005
M.006 (milling)
...
...
global.010
...
T.006 (turning)
...
local.063 TYP_A.006
*.064 mpf *.064 mpf****.013
... geo.011

... ...

...

ÉÉÉÉÉÉÉÉÉ
... TYP_XX.006

ÉÉÉÉÉÉÉÉÉ
... ...

ÉÉÉÉÉÉÉÉÉ
wop.006 *.016

ÉÉÉÉÉÉÉÉÉ
exam.033 erfahr.034 TRANSFER* transfer.mmc

ÉÉÉÉÉÉÉÉÉ
...
mmc.001
... *transfer file created by
mmcsys the user

Fig. 4.1 Important directories


SINUMERIK 840C directories which correspond to DOS PC directories
are highlighted. The patterned background indicates corresponding di-
rectories.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 4–3


SINUMERIK 840C (BN)
4 General Notes 03.95
07.97
4.2 Configurations

4.2 Configurations

You can influence, for example, the following on your PC:


S Machine type
S Languages
S Empirical values
S Control type (T or M).
For this, the graphic programming system provides
S three configuration files
S two configuring files (one for each M and T) and
S two empirical value files (one for each M and T).

If you make changes to machine–specific files (e.g.


in the empirical value file), then you should also
make the changes in the assigned machine
directory.
Procedures:
S Copy the file in question from the main directory
into the machine type related directory
S and then change.

Creating and editing All file management functions such as


files under DOS
S editing an empirical value file or
S editing a part program
are performed using the conventional copy and edit functions under
DOS or Windows.
You can create a new machine type using the graphic programming
system.
Proceed as follows:

4–4  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95 4 General Notes
4.2 Configurations

Procedures for creat- With the function Import mach. type you can also create a new ma-
ing a machine type chine type directory.

Requirement Before you can start file transmission with the File import function, you
must create a transfer directory, e.g. with the function File export.
Operating sequences
To create a new machine type, press the following keys one after the
Read other

File Read,
import
File import and
Import
mach. type Import mach. type.

Enter a new name for the new machine type in the overlaid dialog box
Create new machine and press the INPUT key to confirm.

Note Once you have created a new machine type, you can configure a new
machine type (e.g. with C axis) , for example under DOS
by copying the configuring file in directory
[Drive]:\WOP\T.006\TYP_NEU.006\EXAM.033
and then editing this file.

Defining the control The system stores all data necessary for system start–up in various
type configuration files.
These files are located in directory “[Drive]:\WOP”.
These configuration files have a uniform structure with different keys.
Each line consists of a key and a value in the following notation
“Symbol = |VALUE|”
e.g. in “[Drive]:\WOP\propsys1.cfg” configure

PARTPROG=\840C
KEYBOARD=0
CONTROL=840C
TRANSFER=\TRANSFER

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 4–5


SINUMERIK 840C (BN)
4 General Notes 03.95
4.2 Configurations

The following table lists the data of the three configuration files
S progsys1.cfg
S progsys2.cfg
S progsys3.cfg
File Sym-
Value Meaning
name bol
prog- Static configuration data
sys1.cfg1)
Part- drive:\path Start node and drive of machine–
prog specific part programs
Key- 0 PC standard
board 1 840C keyboard
2
Con- 840C User interface as for 840C
trol
TRAN drive:\path Name of transfer directory
SFER
prog- Dynamic data for system start
sys2.cfg2)
Sys- T Turning
tem M Drilling/Milling
Ma- ******** Real machine designation:
chine max. 8 characters
Work- ******** Workpiece designation
piece max. 8 characters
prog- Language configuration
sys3.cfg2)
Lan- DEUTSCH System language
guage ENGLISH max. 8 characters
ESPANOL
FRANCAIS
ITALIANO

1) Standard configuration file


2) Initial setting for system call (contents of the entry of the last graphic programming session in dialog box
Machine type)

4–6  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95
07.98 4 General Notes
4.3 Compatibility table

4.3 Compatibility table

Every software version of the graphic programming system is upwards


compatible.
Program You can find out which software version you have with the functions
info Program info/System status.
The following table lists the possible versions for
System S the graphic programming system for turning and
status
S the graphic programming system for drilling and milling.
An “X” in the table indicates the compatibility of the created geometry
files and part programs.
Compatibility table: “Graphic programming system for drilling and mill-
ing”:
from/to
1.1 2.1 3.1 3.3 6.1 6.1C1) 6.2 6.2C1) 6.4 6.4C1) 6.5 6.5C1)
version
V1.1     
  2) 2) 2) 2) 2) 2) 2) 2)

V2.1     
 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)

V3.1    
 2) 2) 2) 2) 2) 2) 2) 2) 2)

V3.3         
V6.1        
V6.1C1)  2) 2) 2)
V6.2      
V6.2C1)   
V6.4    
V6.4C1)  

1) A C following the version number indicates that multi–side machining has been set with WOP–M and that the C–axis option is
active with WOP–T.
2) Problems may be encountered when taking over machining operations.

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 4–7


SINUMERIK 840C (BN)
4 General Notes 03.95
07.98
4.3 Compatibility table

Compatibility table: “Graphic programming system for turning”:


from/to 4.1 5.2 5.3 6.1 6.2 6.4 6.5
3.1 3.2 4.1 5.2 5.3 6.1 6.2 6.4 6.5
version C1) C1) C1) C1) C1) C1) C1)
V3.1           
 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)

V3.2          
 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)

V4.1              
V4.1C1)       
V5.2            
V5.2C1)      
V5.3          
V5.3C1)     
V6.1        
V6.1C1)    
V6.2      
V6.2C1)   
V6.4    
V6.4C1)  

1) A C following the version number indicates that multi–side machining has been set with WOP–M and that the C–axis option is
active with WOP–T.
2) Problems may be encountered when taking over machining operations.

4–8  Siemens AG 1997 All Rights Reserved 6FC5198–VAB10


SINUMERIK 840C (BN)
03.95 5 Index

5 Index
C L
Compatibility table, 4–7 Log functions, 2–14
Configurations, 4–4

M
D Machine type, 2–12
Data, Transmission Creating, 4–4
PC to SINUMERIK, 2–17 Menu tree, 2–9
PCIN, 2–16
Delete transfer, 2–11
N
NC–>PC, 2–14
E
Editing
P
Empirical value file, 4–4
Part program, 4–4 Part program, Editing, 4–4
Empirical value file, Editing, 4–4 PC user interface and keyboard, 2–6
Export PC–>floppy, 2–10
Machine type, 2–10 PCIN, 2–18
Magazine, 2–10 Program info, 2–14
Workpiece, 2–10 Programming examples on PC, 3–1

F R
File Read, 2–11
Export, 2–10, 2–16 Autosave, 2–11
Functions, 2–8 Original, 2–11
Import, 2–13, 2–16
File environment DOS operating system,
4–2 S
Floppy–>PC, 2–13 Save, 2–10
Functionality, Differences in, 2–8 As, 2–10
Original, 2–10
H
Hardware and software requirements, 2–2
T
How it is supplied, 2–1 Transfer, 4–2
Transfer directory, 2–16, 4–2
Transmission functions, 2–16
I
Import
W
Machine type, 2–13
Magazine, 2–13 WOP end, 3–4
Workpiece, 2–13 Workpiece
Important directories, 4–3 Initialize, 2–11
Info, 2–14 New, 2–11
Installation and Operation, 2–1 Workpiece new, 3–1

 Siemens AG 1997 All Rights Reserved 6FC5198–VAB10 5–1


SINUMERIK 840C (BN)
SIEMENS AG Suggestions

Corrections
For publication:
A&D MC V5
Graphic Programming System on PC
P.O. Box 3180 Software Version 6

D–91050 Erlangen
Fed. Rep. of Germany User Documentation
Environment Description
From
Order No.: 6FC5198–6AB10–0BP3
Name Edition: 07.98
Company/Dept. Should you come across any printing errors
Address when reading this publication, please notify us
on this sheet.
Suggestions for improvements are also wel-
come.
Telephone: /
Telefax: /

Suggestions and/or corrections

You might also like