Flow Chart On CRT Defect

Judgement By Machine Call

AOI LABEL FAIL AOI Fail to CRT Def

Notes : CRT_DefectRiskControl
will automaticallly move to the
other station by refering to the
Failure Code that are given by
Machine Call
Please refer Failure Code :
"Click Here"
w Chart On CRT Defect
Auto Select

LowRiskDef

Auto Select
Auto Select

AVT-CRT_DefectRiskControl LabelRiskDef

Notes : CRT_DefectRiskControl
will automaticallly move to the
other station by refering to the
Failure Code that are given by Auto Select
Machine Call
Please refer Failure Code : HighRiskDef
"Click Here"
Defect Code Description
A001 Clinching
A002 Clipping
A003 Component Height
A004 Component Loose/Reseat
A005 Component Missing
A006 Component Reversed
A007 Component Revision/Date Code Wrong
A008 Component Tilt Excessive
A009 Component Type Wrong
A010 Lifted Lead
A012 Epoxy Excessive
A013 Epoxy Insufficient
A014 Epoxy Misaligned
A015 Epoxy Missing
A016 Extra Part
A018 Lead Form Improper
A019 Lead Protrusion Excessive
A020 Lead Misalignment
A021 Lead Protrusion Insufficient
A022 Leg Bent
A023 Meniscus
A024 Orientation Incorrect
A025 Pin Not Lifted
A026 Jumper Block Location Wrong
A027 Jumper Block Missing
A028 Component Misaligned
A029 Component Damaged
A030 Component Wrong
A031 Tarnished
A032 White Residue
A033 Assembly Date Code Wrong/Missing
A034 Assembly Number Wrong/Missing
A036 Bar Code Not Readable
A037 Ink Marking Missing
A038 Ink Not Legible
A039 Label Damaged/Not Legible
A040 Label Missing
A041 Logo Wrong/Missing
A042 Rev. Label Wrong/Missing
A043 S/N Wrong/Missing
A044 Stamp Missing
A045 Air Bubble
A046 Color Mismatch
A047 Conformal Coat Excessive
A048 Conformal Coat Insufficient
A049 Conformal Coat Lifted
A050 Conformal Coat Not Cured
A051 Overlap
A052 Paint Excessive
A053 Paint Insufficient/Missing
A054 Pin Configuration Wrong
A055 Program Wrong/Missing
A056 Revision/ECO Wrong
A057 Cable Arm Misaligned
A058 Extra Hardware
A059 Gaps
A060 Hardware Loose
A061 Hardware Misaligned
A062 Hardware Mismatched
A063 Hardware Missing
A064 Installation Incorrect
A065 Lubricant Missing
A066 Mechanical Play Excessive
A067 Noisy
A068 Part Bent
A069 SIMMs Loose
A070 Tie Wrap Damaged
A071 Torque Screw
A072 Wobble
A073 Doc. Incomplete
A074 Extra Part
A075 Orientation Wrong
A076 Part Missing
A077 Part Wrong
A078 Process Material Defect
A079 ATE Defective
A080 NDF (No Defect Found)
A081 Test Fixture Misalignment
A082 Test Probe Missing
A083 Test Probe Sticks
A084 Test Probe -- Wrong Type
A085 Test Program -- Down Rev
A086 Test Program -- No Coverage
A087 Test Program Unstable
A088 No signal output
A089 Digital Failure
A090 Analog Failure
A091 Shorted Continuity
A092 Open/no Continuity
A093 Out of Tolerance
A094 Temperature sensitive
A095 Component Burnt
A096 Crimp Problems
A097 Glue on Jumper Wire Missing
A098 Wire Location Wrong
A099 Wire Misrouted
A100 Wire Missing
A101 Wire Strip Length Wrong
A102 Boot up Problem
A103 Color Problem
A104 Configuration Incorrect
A105 Cursor Problem
A106 Data Cache Problem
A107 Drive Problem
A108 Graphics Problem
A109 Initialization Problem
A110 Intermittance
A111 Interrupt Failure
A112 Keyboard Problem
A113 Power Up Problem
A114 RAM Failure
A115 Reset Problem
A116 Sound Problem
A117 System Error
A118 Vert/Horiz Lines
A119 Video Problem
A120 Virus
A121 Windows Problem
A122 Glue Residue
A123 Cosmetic Defect
A124 False Failure
A125 Bad Rework
A126 Lead Co-planarity
A127 RTV Excessive
A128 RTV Insufficient
A129 RTV Missing
A130 Epoxy on threads
A131 Incorrect Paperwork
A132 CCF (Companion card failed)
A133 Internal Bent Pin
A134 Test Probe Misalignment
A135 Test Probe Dirty
A136 Test Probe Bad
A137 Tray Scratches
A138 Insulator Bubbles
A139 Insulator Misalignment
A140 Insulator Edges Broken
A141 Insulator Contamination
A142 Press fit Connector Damage
A143 Power Connector Damage
A144 End Panel Laminate Damage
A145 End Panel Bent
A146 Wrong End Panel
A169 Debris
A170 Powder Coating/Paint Defect On Mech Part
A171 Wrong Revision/Assembly
A172 Shorted Continuity DUMMY
A173 Reinsert Dimm DUMMY
A174 H/sink Misaligned
A175 H/sink Wrong part
A176 H/sink Wrong Orientation
A177 H/sink Missing
A178 H/sink Loose/Drop
A179 H/sink Damaged
A180 H/sink Discoloration
A181 H/sink Excessive Loctite
A182 H/sink Tilted
A183 Rework
A187 Un-Repairable
C001 Epoxy Contaminated
C002 Contamination
C003 Fingerprints
C004 Flux Contamination
C005 Flux Residue
C006 Grease
C007 Masking Residue
C008 Oily
L001 SMT-SN-Damaged
L002 SMT-SN-Illegible
L003 SMT-SN-Missing
L004 SMT-SN-Misalign
L005 SMT-SN-Wrong
L006 SMT-SN-Dislocated
L007 SMT-SN-Others
L008 SMT-PN-Damaged
L009 SMT-PN-Illegible
L010 SMT-PN-Missing
L011 SMT-PN-Misalign
L012 SMT-PN-Wrong
L013 SMT-PN-Dislocated
L014 SMT-PN-Others
L015 SMT-DEV-Damaged
L016 SMT-DEV-Illegible
L017 SMT-DEV-Missing
L018 SMT-DEV-Misalign
L019 SMT-DEV-Wrong
L020 SMT-DEV-Dislocated
L021 SMT-DEV-Others
L022 SYS-SN-Damaged
L023 SYS-SN-Illegible
L024 SYS-SN-Missing
L025 SYS-SN-Misalign
L026 SYS-SN-Wrong
L027 SYS-SN-Dislocated
L028 SYS-SN-Others
L029 SYS-PN-Damaged
L030 SYS-PN-Illegible
L031 SYS-PN-Missing
L032 SYS-PN-Misalign
L033 SYS-PN-Wrong
L034 SYS-PN-Dislocated
L035 SYS-PN-Others
L036 SYS-DEV-Damaged
L037 SYS-DEV-Illegible
L038 SYS-DEV-Missing
L039 SYS-DEV-Misalign
L040 SYS-DEV-Wrong
L041 SYS-DEV-Dislocated
L042 SYS-DEV-Others
M001 Component Body Wrong Size
M002 Component Electrical Failure
M003 Component is Temperature Sensitive
M004 Component Marking Wrong/Missing
M005 Component Mechanical Failure
M006 Component Value Wrong
M007 Copper Exposed
M008 Discoloration
M009 Mousebite
M010 Part Number Wrong
M012 Plating Poor/Missing
M014 PWB Warped
M015 PWB/Flex Delimitation
M016 PWB/Flex Fab Open
M017 PWB/Flex Fab Short
M018 PWB/Flex Failed Contamination Test
M019 PWB/Flex Fiducial Missing
M020 PWB/Flex Misregistration
M021 PWB/Flex Pad Missing
M024 PWB/Flex Silk-screen Marking
M027 Solder Mask Insufficient
M028 Solder Mask on Pad
M029 Solderability Poor
M030 Stringer/Burr
M031 Threads Damaged
M032 Vendor Unapproved
M033 Flex Torn
M034 Corrosion
M035 Oxidation
M036 Connector Broken
M037 Dent
M038 Depression
M039 Flex Dent
M040 Material/Component Damaged
M041 PWB/Flex Delamination
M042 PWB/Flex Discolored
M043 PWB/Flex Edge Damaged
M044 PWB/Flex Pad Damaged
M045 PWB/Flex Surface Damaged
M046 Solder Mask Damaged
M047 Surface Cracked
M048 Surface Scratched
M049 Trace Damaged
M050 Burred
M051 Cable Color Wrong
M052 Cable Damaged
M053 Cable Kinked/Bent
M054 Feet Missing
M055 Vendor Material Defect
M056 PCB Discolored
M057 PWB/Flex Pad Lifted
M058 Trace Cut Missing
M059 Trace Cut Wrong
M060 Wire Color Wrong
M061 Wire Connection Wrong
M062 Wire Damaged
M063 Wire Gauge Wrong
M064 Wire Insulation Damaged
M065 Wire Insulation Missing
M066 Material Shortage
M067 End of Kit
M068 Floating Leads
M071 Component Electrical Failure DUMMY
M075 Component Hot Temperature Sensitive
M076 Component Cold Temperature Sensitive
W001 BGA Re-Flow
D001 Screw Loose/ Unflushed
D002 Screw Missing
D003 Wrong Screw
D004 Damaged screw
D005 Screw Hole Tread Damaged
D006 Screw Hole Misaligment
D007 Thumb Screw Came-Off
S001 Blowholes
S002 Component Tombstone
S003 Dewetting
S004 Pits and Pinholes
S005 Points Peaks and Icicles
S006 Poor Wetting
S007 Solder Balls
S008 Solder Bridge to Leads
S009 Test Point
S010 Solder Cold
S011 Solder Cracked
S012 Solder Disturbed
S013 Solder Excessive
S014 Solder Insufficient
S015 Solder on Gold Finger
S016 Solder Open/Solder Skip
S017 Solder Splash
S018 Solder Void
S019 Wire Not Soldered
S020 Wire Solder Joint Bad
S021 PWB/Flex Pad Solder Excessive
S022 PWB/Flex Pad Solder Insufficient
S023 Solder Flat
S024 Vias Plugged
S025 Solder Paste Bridge to Leads
S026 Solder Paste Bridge to Via/Trace
S027 Solder Paste Distributed
S028 Solder Paste Excessive
S029 Solder Paste Insufficient
S030 Solder Paste Splash
S035 Solder Open/Solder Skip DUMMY
S036 Solder Insufficient DUMMY
T012 Serialization Error
T013 Job Order Error
T014 Duplicate Serial Number
T015 Bad Component/Functional Fail
T016 Whole Cell Failure
T017 Remate
ZZ01 Others
L043 SYS-Wrong orientation
L-044 SYS-Wrong PN
L044 LabelDefect_AvagoLabel_Smear
B000 On board label defect
C000 Non Board Label defect
B001 LabelDefect_AvagoLabel_Misalignment
B002 LabelDefect_AvagoLabel_Missing
B003 LabelDefect_AvagoLabel_Damage
B004 LabelDefect_AvagoLabel_Not readable
B005 LabelDefect_AvagoLabel_Not Legible
B011 LabelDefect_NonBoardLabel_Misalignment
B012 LabelDefect_NonBoardLabel_Missing
B013 LabelDefect_NonBoardLabel_Damage
B014 LabelDefect_NonBoardLabel_Not readble
B015 LabelDefect_NonBoardLabel_Not Legible
A188 NDF_ICT (No Defect Found)
A189 NDF_FT (No Defect Found)
A190 NDF_MDA (No Defect Found)
A191 Gold finger Scratches
A192 Solder on Gold Finger
A193 Gold finger Damaged
A194 Gold finger Contamination
A195 Gold finger Delam /Expose Copper
H001 High Risk Defect Code
L00A Low Risk Defect Code
A200 Component Knockoff
D008 Bracket Wrong
D009 Bracket Damaged
LBL001 LabelDefect_AvagoLabel_Misalignment
LBL002 LabelDefect_AvagoLabel_Missing
LBL003 LabelDefect_AvagoLabel_Damage
LBL004 LabelDefect_AvagoLabel_Not readable
LBL005 LabelDefect_AvagoLabel_Not Legible
A196 MAC address problem (HPE)
A197 Reflash FW
A198 Retest
A199 SFP Failure
A2 Loop Back Failure
A201 Loop Back Failure
M078 Component Knockoff
A202 NVRAM Mismatch
Machine Defect Name Failure Code Flexflow Description 1
PADOVERHANG A028 Component Misaligned
SOLDERFILLET S014 Solder Insufficient
COPLANARITY A010 Lifted Lead
BRIDGING S008 Solder Bridge to Leads
DIMENSION M001 Component Body Wrong Size
POLARITY A075 Orientation Wrong
OCROCV M004 Component Marking Wrong/Missing
MISSING A005 Component Missing
UPSIDEDOWN A006 Component Reversed
FOREIGNMATERIAL A016 Extra Part
ABSENCE A016 Extra Part
Component Height A003 Component Height
Component Missing A005 Component Missing
Component Reversed A006 Component Reversed
Lifted Lead A010 Lifted Lead
Epoxy Excessive A012 Epoxy Excessive
Epoxy Insufficient A013 Epoxy Insufficient
Epoxy Missing A015 Epoxy Missing
Extra Part A016 Extra Part
Leg Bent A022 Leg Bent
Component Misaligned A028 Component Misaligned
Component Damaged A029 Component Damaged
Component Wrong A030 Component Wrong
Orientation Wrong A075 Orientation Wrong
Internal Bent Pin A133 Internal Bent Pin
Solder Bridge to Leads S008 Solder Bridge to Leads
Solder Splash S017 Solder Splash
Solder Excessive S013 Solder Excessive
Solder Insufficient S014 Solder Insufficient
Solder on Gold Finger S015 Solder on Gold Finger
Gold finger Delam /Expose Copper A195 Gold finger Delam /Expose Copper
Gold finger Damaged A193 Gold finger Damaged
Gold finger Contamination A194 Gold finger Contamination
Label Missing A040 Label Missing
Label Damaged/Not Legible A039 Label Damaged/Not Legible
H/sink Misaligned A174 H/sink Misaligned
H/sink Wrong part A175 H/sink Wrong part
H/sink Wrong Orientation A176 H/sink Wrong Orientation
H/sink Missing A177 H/sink Missing
H/sink Damaged A179 H/sink Damaged
H/sink Discoloration A180 H/sink Discoloration
Screw Loose/ Unflushed D001 Screw Loose/ Unflushed
Screw Missing D002 Screw Missing
Wrong Screw D003 Wrong Screw
Damaged Screw D004 Damaged screw
Thumb Screw Came-Off D007 Thumb Screw Came-Off
Tombstone S002 Component Tombstone