Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Installation of The 504-3561 Chassis Wiring GP On Certain Hydraulic Excavators (1408)

    Uploaded by

    Flávio da silva carvalho
    The document provides installation instructions for installing a 504-3561 Chassis Wiring Group on certain hydraulic excavators. It lists the required parts, provides an overview of the wiring group, and gives detailed step-by-step instructions on how to connect the various harnesses and connectors along with accompanying illustrations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Installation of The 504-3561 Chassis Wiring GP On Certain Hydraulic Excavators (1408)

    Uploaded by

    Flávio da silva carvalho
    24 views5 pages
    The document provides installation instructions for installing a 504-3561 Chassis Wiring Group on certain hydraulic excavators. It lists the required parts, provides an overview of the wiring group, and gives detailed step-by-step instructions on how to connect the various harnesses and connectors along with accompanying illustrations.

    Original Title

    7

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides installation instructions for installing a 504-3561 Chassis Wiring Group on certain hydraulic excavators. It lists the required parts, provides an overview of the wiring group, and gives detailed step-by-step instructions on how to connect the various harnesses and connectors along with accompanying illustrations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views5 pages

    Installation of The 504-3561 Chassis Wiring GP On Certain Hydraulic Excavators (1408)

    Uploaded by

    Flávio da silva carvalho
    The document provides installation instructions for installing a 504-3561 Chassis Wiring Group on certain hydraulic excavators. It lists the required parts, provides an overview of the wiring group, and gives detailed step-by-step instructions on how to connect the various harnesses and connectors along with accompanying illustrations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    336 Excavator SP900001-UP (MACHINE) POWERED BY C9.3 Engine(M0096839 -...

    Page 1 of 5

    Fechar o SIS

    Tela anterior

    produtos: EXCAVATOR
    Modelo: 336 EXCAVATOR SP900413
    Configuração: 336 Excavator SP900001-UP (MACHINE) POWERED BY C9.3 Engine

    Instruções Especiais
    Installation of the 504-3561 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
    Número de Mídia -M0093425-00 Data de Publicação -13/09/2018 Data de Atualização -13/09/2018

    i07381494

    Installation of the 504-3561 Chassis Wiring Gp on Certain


    Hydraulic Excavators {1408}
    SMCS - 1408

    Excavator
    336 (S/N: SP91-UP; FEL1-UP; YBN1-UP; DKS1-UP; GDY1-UP; HBY1-UP)
    336 GC (S/N: EBJ1-UP; JFW1-UP)

    Introduction
    Do not perform any procedure in this Special Instruction until you have read the information and you
    understand the information.

    Safety Section

    Illustration 1 g00104545

    Prevent the machine from movement. Park the machine on a level surface.
    336 Excavator SP900001-UP (MACHINE) POWERED BY C9.3 Engine(M0096839 -... Page 2 of 5

    Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before
    you service equipment . These warning tags (Special Instruction, SEHS7332) are available from your
    Caterpillar dealer.

    Required Parts
    Table 1
    504-3561 Chassis Wiring Gp (- 01)
    Item Qty Part No. Part Name
    (1) 24 7K-1181 Cable Strap
    (2) 2 342-2973 Connector Cap
    (3) 8 484-1453 Clip
    (4) 1 551-3758 Chassis Harness As

    Illustration 2 g06346669
    336 Excavator SP900001-UP (MACHINE) POWERED BY C9.3 Engine(M0096839 -... Page 3 of 5

    Overview of 504-3561 Chassis Wiring Gp

    Installation Procedure

    Illustration 3 g06346670
    (A) Connect to harness (12 POLES), "C985 BU", "J879 GN", "M906 BU","M907 GY", "P702 GY", "X785 BU", "M739
    YL", "H808 WH", "H807 WH" (with white tape)
    (B) Connect to harness (12 POLES), "K856 PU", "K860 BU", "K857 WH","K861 GN", "K858 YL", "K862 GY", "J808
    BK", "P761 OR","P765 GN", "J809 BK", "X738 PK", "H863 BU"
    (C) For ATCH harness (Smart Boom) (12 POLES), "P702 GY", "X785 BU", "M739 YL", "H808 WH" (with white tape)
    (D) For ATCH harness (Medium Circuit) (12 POLES), "K858 YL", "K862 GY", "J808 BK"
    (E) For variable relief 1 solenoid, "P761 OR", "J809 BK"
    (F) For squeeze head pressure sensor, "C985 BU", "J879 GN", "M906 BU"

    1. Install harness and connectors as shown.


    336 Excavator SP900001-UP (MACHINE) POWERED BY C9.3 Engine(M0096839 -... Page 4 of 5

    Illustration 4 g06346673
    (G) For squeeze rod pressure sensor, "C985 BU", "J879 GN", "M907 GY"
    (H) For variable relief 2 solenoid, "P765 GN", "J809 BK"
    (J) For hammer return filter switch, "X738 PK", "H863 BU"

    2. Install harness and connector as shown.


    336 Excavator SP900001-UP (MACHINE) POWERED BY C9.3 Engine(M0096839 -... Page 5 of 5

    Illustration 5 g06346674
    (G) For squeeze rod pressure sensor, "C985 BU", "J879 GN", "M907 GY"
    (K) Connect to valve harness (6 POLES), "K856 PU", "K860 BU", "K857 WH","K861 GN", "J807 BK", "J808BK"

    3. Install harness and connectors as shown.

    Direitos Autorais 1993 - 2024 Caterpillar Inc. Thu Jan 4 19:35:49 UTC-0300 2024
    Todos os Direitos Reservados.
    Rede Particular Para Licenciados SIS.

    You might also like