Scribd
Upload
42 views4 pages

S5 Instrumentation Engineering: Time: 3 Hour Max. Marks: 75

This document contains two model question papers for an Instrumentation Engineering examination. Each paper has three parts - Part A contains short answer questions, Part B contains short description questions, and Part C contains detailed explanation questions. The questions test knowledge across various modules relating to industrial instrumentation topics like viscosity measurement, humidity measurement, radiation measurement, force and speed measurement, thickness measurement, and sensors.

Uploaded by

Sam Jhonson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views4 pages

S5 Instrumentation Engineering: Time: 3 Hour Max. Marks: 75

This document contains two model question papers for an Instrumentation Engineering examination. Each paper has three parts - Part A contains short answer questions, Part B contains short description questions, and Part C contains detailed explanation questions. The questions test knowledge across various modules relating to industrial instrumentation topics like viscosity measurement, humidity measurement, radiation measurement, force and speed measurement, thickness measurement, and sensors.

Uploaded by

Sam Jhonson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

TED (21) – 5081 REVISION 2021

MODEL QUESTION PAPER 1

S5 INSTRUMENTATION ENGINEERING
COURSE: INDUSTRIAL INSTRUMENTATION
Time: 3 Hour Max. Marks: 75
I: Part –A: Answer all the following questions in one word or one sentence. (1 x 9 = 9Marks)
Module Cognitive
Outcomes Level
1 Define the term pH. M1.01 U
2 List one instrument used for viscosity measurement. M1.02 R
3 Define ‘absolute humidity’ M2.01 U
4 Name two instruments used for nuclear radiation measurement. M2.03 R
5 What is the use of stroboscope? M3.03 U
6 Name one device used for force measurement. M3.02 R
7 What is the basic principle of thickness measurement using ultrasonic M4.02 U
method ?
8 Expand the term MEMS. M4.03 R
9 What is the use of hygrometers ? M2.01 R

II: Part – B: Answer any eight questions. Each question carries 3 Marks. (3 x 8 = 24 Marks)
Module Cognitive
Outcomes Level
1. Describe the terms ‘absolute viscosity’, ‘kinematic viscosity’ and M1.01 U
‘relative viscosity’.

2. Draw the picture of glass electrode. M1.03 U

3. Illustrate the working of hair hygrometer. M2.02 U

4. Define the terms ‘relative humidity’ and ‘absolute humidity’. M2.01 U

5. Illustrate any one type of torque measurement. M3.02 U

6. Describe any one type of revolution counter. M3.03 U

7. Illustrate inductive type thickness measurement. M4.02 U

8. Write short notes on MEMS. M4.03 U

9. Describe working of AC tachogenerator. M3.02 U

10. Describe the working of capacitance type hygrometer. M2.02 U


Part – C
Answer any six questions. Each question carries 7 marks. (7 x 6 = 42 Marks)
Module Cognitive
Outcomes Level
III With necessary figures explain pH measurement using combined M1.03 U
electrode.

OR

IV With necessary figures explain density measurement using LVDT M1.02 U


V With necessary figures explain construction and working of wet bulb M2.02 U
psychrometer

OR

VI With necessary figures explain construction and working of Gieger M2.03 U


Muller tube.
VII With necessary figures explain force measurement using pneumatic load M3.02 U
cell.

OR

VIII With necessary figures explain any one method of speed measurement M3.03 U
IX Explain acceleration measurement using piezoelectric accelerometer. M4.02 U

OR

X Explain any one application of nano sensors. M4.03 U


XI With necessary figures explain working of eddy current proximity M4.01 U
sensor.
OR

XII Explain any one type of smoke detector. M4.03 U


XIII With necessary figures explain digital pH meter. M1.03 U

OR

XIV With necessary figures explain specific gravity measurement. M1.02 U


TED (21) – 5081 REVISION 2021
MODEL QUESTION PAPER 2
S5 INSTRUMENTATION ENGINEERING
Course: INDUSTRIAL INSTRUMENTATION
Time: 3 Hour Max. Marks: 75
I: Part –A: Answer all the following questions in one word or one sentence. (1 x 9 = 9Marks)
Module Cognitive
Outcomes Level
1 Write one unit of viscosity. M1.01 R
2 Define specific gravity. M1.01 U
3 What is dew point? M2.01 U
4 Name two instruments used for nuclear radiation measurement. M2.03 R
5 What is the use of load cell? M3.02 R
6 Name one device used for speed measurement. M3.02 U
7 What is the basic principle of thickness measurement using capacitive M4.02 U
method?
8 Expand the term MEMS. M4.03 R
9 Write applications of radiation detector. M1.03 R

II: Part – B: Answer any eight questions. Each question carries 3 Marks. (3 x 8 = 24 Marks)
Module Cognitive
Outcomes Level
1. Describe the terms ‘absolute viscosity’, ‘kinematic viscosity’ and M1.01 U
‘relative viscosity’.

2. Draw the picture of hydrometer. M1.02 U

3. Illustrate the working of resistive hygrometer M2.02 U

4. What are the applications of radiation sensors? M2.03 U

5. Illustrate any one type of torque measurement. M3.02 U

6. Describe eddy current tachometer. M3.03 U

7. Compare relative humidity and absolute humidity. M2.01 U

8. Write short notes on Nano sensors. M4.03 U

9. Describe working of stroboscope. M3.02 U

10. Write short notes on mechanical vibration sensor M4.01 U


Part – C
Answer any six questions. Each question carries 7 marks. (7 x 6 = 42 Marks)
Module Cognitive
Outcomes Level
III Draw and explain Redwood Viscometer. M1.02 U

OR

IV Describe any two electrodes used for pH measurement. M1.03 U


V With necessary figures explain wet and dry bulb hygrometer M2.02 U

OR

With necessary figures explain construction and working of Ionization


VI chamber. M2.03 U
VII With necessary figures explain force measurement using hydraulic load M3.02 U
cell.
OR

VIII With necessary figures explain the working of proximity torque sensor M3.03 U
IX Explain acceleration measurement using LVDT accelerometer. M4.02 U

OR

X Describe any one type of smoke detector. M4.03 U


XI Describe the working of inductive methods of thickness measurement. M4.01 U

OR

XII Draw and explain seismic accelerometer. M4.02 U


XIII With necessary figures explain digital pH meter. M1.03 U

OR

XIV Describe the working of saybolt viscometer with figure. M1.02 U

You might also like