Face recognition

machine
Handbook

Catalog
Chapter 1 A basic introduction to machines........4

1
 Ⅰ Product appearance description......................................................4
Ⅱ Main parameter.................................................................................7
Ⅲ Menu introduction............................................................................8
Chapter 2 Instructions of the machine................10
1.1 Register........................................................................................................10
1.1.1 Facial registration.................................................................................10
1.1.2 Fingerprint registration.........................................................................10
1.1.3 Password registration............................................................................10
1.1.4 Induction card registration....................................................................10
1.2 View User.....................................................................................................11
1.3 Delete User..................................................................................................11
1.4 Query entry and exit record.........................................................................11
Ⅱ Set communication..........................................................................11
2.1 Machine ID..................................................................................................11
2.2 Baud Rate.....................................................................................................11
2.3 IP Address....................................................................................................11
Ⅲ Set time.............................................................................................12
Ⅳ Device...............................................................................................12
4.1 General setting.............................................................................................12
4.1.1 Language...............................................................................................12
4.1.2 Date Format..........................................................................................12
4.1.3 Volume..................................................................................................12
4.1.4 Auto OFF..............................................................................................12
4.1.5 Screen Saver.........................................................................................12
4.1.6 Wiegand................................................................................................13
4.2 Logs.............................................................................................................13
4.2.1 Arec WRN (Administrator record warning).........................................13
4.2.2 URec WRN (User Record Warning).....................................................13
4.2.3 Re-verify...............................................................................................13
4.3 Advanced.....................................................................................................13
4.3.2 Delete ALL REG...................................................................................13
4.3.3 Delete ALL data....................................................................................13
4.3.4 Default Setting......................................................................................14
4.4 Lock Control................................................................................................14
4.4.1Time Setting...........................................................................................14
4.4.2Lock Register.........................................................................................14
4.4.3Time Group Set......................................................................................14
2
 4.4.4Unlock Group........................................................................................14
4.4.5Unlock Time Delay................................................................................14
4.4.6Lock Type Set........................................................................................14
4.4.7Access Mode..........................................................................................15

Ⅴ、USB disk........................................................................................15
5.1 All Rec. (Download all attendance data ).....................................................15
5.2 Enr. Data (Download enrolled user data).....................................................15
5.3 Load Data (Upload user data)......................................................................15
Ⅵ System Info......................................................................................15
Chapter 3 Enclosure............................................................................17
Illustration of Correct Fingerprint Pressing...................................................17
Wrong Pressing Method.................................................................................17
Wiring diagram of entrance guard.................................................18

Chapter 1 A basic introduction to machines

3
Ⅰ Product appearance description

4
5
6
Ⅱ Main parameter

Seq. Item Index

Working power
1 DC: voltage 12V + 10% current < 350mA
supply

2 Outer size 200(L) x88(W) x 28(D) mm

3 Weight 0.28kg
working
4 -20℃—50℃
temperature

5 Humidity 10%—85%

60000 records, 500 faces, 1500 fingerprints and 500

6 Storage capacity
passwords.
Speed of
7 ≤0.5S
recognition
8 FRR <0.01%
9 FAR <0.001%

TCP/IP, & U-disk

Communication
10
mode Via U-disk it can send fingerprint data to other devices

7
11 Wiegand signal Wiegand output, can be used as a reader

Keyboard and
12 2.8 inch color screen and touch button
display

Ⅲ Menu introduction

1 、 Register 4 、 Device

Menu 2 、 Set comm 5 、 U-disk

3 、 Set time 6 、 Sys Info

1 、 Register

2.View User
3.Delete User 4 ． View Log
1.Register

1.Machine ID 6.Port No

2.Baudrate 7.Server Req

2 、 Set comm
3.IP Address 8.Server IP

8
4.Subnet 9.SerPortNO
4 、 Device
4 、 Auto OFF
1 、 Language
1GeneralSetting
2 、 DateFormat 5 、 Scerrn Saver

3 、 Volume 6 、 Wiegan

1 、 Arec WRN

2 、 Logs 2 、 URec WRN 1Delete ALL REC

3 、 Reverify 2Delete ALL REG

3 、 Advanced 3Delete ALL data

1 、 Time Setting 4Default Setting

2 、 Lock Register

3.Time Group Set

4 、 Lockctrl 4 、 Unlock Group 1 、 Alarm Type

5.Unlock Time 2 、 Alarm Delay

6.Lock Type Set 1 、 G.Mode

7 、 Access Mode 2 、 Users

9
 5 、 Udisk

1 、 All Rec 2 、 Enr.Data 3 、 LoadData

6 、 Sys Info

1 、 Reg.Data 2.Free Space Info 3.All Space Info 4 、 Product

Chapter 2 Instructions of the machine

Under attendance status, press the "MENU" key
(1) Once the manager has not been registered, directly into the menu;
(2) The registered manager can enter the menu after successful
verification.
Ⅰ Register
There are four registering modes in this attendance machine: face, fingerprint,
password and card. Each user can register 10 fingerprints, 1 passwords, 1 face and 1
card(optional).
The manager registration is to authorize the manager to manage the operation.
The registration method is the same as ordinary user registration, but the user
privilege is selected as the senior administrator.
Note: The function of the induction card is non standard function, depending on
its specific type.

1.1 Register
1.1.1 Facial registration
Register → Register → Input work ID, name →Choose the face
→ OK → Enter 8 times → Success of registration
When you register your face, you need to place your face straight, and the machine
will automatically recognize the current face. After 8 successful entries of different
angle, the face will be saved to the device.
10
 1.1.2 Fingerprint registration
Register → Register → Input work ID, name → Registration of fingerprints → OK
→ Enter 3 times → Success of registration

1.1.3 Password registration

Register → Register → Input work ID, name → Select the password
→ OK → Input password → OK → Enter the password again → OK
The password length is 1-8 digits, and a user registers only one password.
1.1.4 Induction card registration
Register → Register → Input work ID, name → Selection of card → OK → Please
Swipe your card → OK

1.2 View User

Register → View User → Choice of work ID → OK → Select the options that need
to be edited → OK .
View User can edit the data of registered users, backup fingerprints and modify user
permissions.

1.3 Delete User

Register → Delete → Input work ID → OK → Select Delete→ OK

1.4 Query entry and exit record

Register → View Log → Input work ID → OK
Note: We can only inquire about the entry and exit records of current month.

Ⅱ Set communication
2.1 Machine ID
Set comm. → Machine ID → Input work ID（1-255） → OK

11
 2.2 Baud Rate
Set comm. → Baud rate → Select the speed of communication→ OK
The communication speed is optional 9600 or 19200 or 38400 or 57600 or 115200.
The baud rate menu is used to set the speed of the communication between the
attendance and the computer. The set must be consistent with the communication
port of the PC manager, otherwise it can not communicate.

2.3 IP Address
Set comm. → IP Address → Enter the IP address → OK
The IP address of the machine needs to be in the same network segment as the
computer IP address.
Note: Subnet mask, default gateway, port number, transmission, server IP
address, server port number, refer to the IP address, use the choice key to enter,
according to the network actual environment to input.

Ⅲ Set time
Move the cursor to the time setting with the key up or down or enter the
numeric key, enter the time needed to be set, and save it by OK. And Week is auto-
calculated and no need to input.

Ⅳ Device
4.1 General setting
4.1.1 Language
Device → General setting → Language → Choose the language required → OK
Note: there are ten types of languages: Simplified Chinese, traditional Chinese,
English and so on.

4.1.2 Date Format

Device → General setting → Date Format → Select the required format→ OK

12
 4.1.3 Volume
Device → General setting →Volume →Setting up the volume of the volume (1-8
optional) → OK

4.1.4 Auto OFF

Device → General setting→ Auto OFF → Set time shutdown time → OK
Note: 0 represents "no", "no" is switched off for timer shutdown, the time interval is
0-255, the unit is minute.
4.1.5 Screen Saver
Device → General setting → Screen Saver→ Setting screen protection time→ OK

Note: the range of time is 1-255, and the unit is minute.

4.1.6 Wiegand
Device → General setting → Wiegand → Set up Wiegand 26 or Wiegand 34 → OK

4.2 Logs
4.2.1 Arec WRN (Administrator record warning)

It is used to prompt when a administrator record reaches the limit of the

attendance machine's storage limit. All the actions that are done by the
administrator will be recorded as the administrator records.

Device → Logs → Arec WRN → Set number (range 0-255) → OK

4.2.2 URec WRN (User Record Warning)

It is used to set up the number of attendance records before it reaches the limit of the
memory capacity of the attendance machine. When it’s prompted, please use the
software to collect the management records as soon as possible, and delete the data
on the attendance machine to ensure that the new data can be stored.
Device → Logs → URec WRN → Set number (range 0-1500) → OK

4.2.3 Re-verify
For setting two intervals of fingerprint confirmation, the unit is minute. After setting,

13
the attendance data in the interval will not be recorded, and the sign has been signed
at the same time. The default value of the factory is not.
Device → Logs → Re-verify → Set number (range 0-255) → OK

4.3 Advanced
4.3.1 Delete ALL REC
Device → Advanced → Delete ALL REC → OK
4.3.2 Delete ALL REG
Device → Advanced → Delete ALL REG → OK
4.3.3 Delete ALL data
Device → Advanced → Delete ALL data→ OK
4.3.4 Default Setting
Device → Advanced → Default Setting → OK
This operation will restore all the parameters in the machine settings to the factory
settings.

4.4 Lock Control

4.4.1Time Setting
It is used to set different time period attributes and define different time periods.
Device → Lock ctrl. → Time Setting → Selected time period 1 → Choose the
days of the week→ Set time period → OK
4.4.2Lock Register
Used to set up a group or time segment allowed by a user.
Device → Lock ctrl. → Lock Register → Input the number that needs to be set →
Set up the group and time → OK
4.4.3Time Group Set
It is used to set different time periods in different groups, and define the time periods
according to the time period item. For example, set group 1 to be time period 1.
Device → Lock ctr.l → Time Group Set → Select group → Set the required time
period→ OK

14
 4.4.4Unlock Group
For set and combine different members from different groups, it can only be
unlocked when all members are combined
Device → Lock ctrl. → Unlock Group → Select combination → Set the time
segment of the group unlocking → OK
4.4.5Unlock Time Delay
It is used to set how long the door can be closed after unlock verification The
parameter range is set to 1-255, and the unit is second.
Device → Lock ctrl. → Unlock Time → Set number (range 1-255)→ OK
4.4.6Lock Type Set
Device → Lock ctrl. → Lock Type Set → Setting door magnetic type and time delay
→ OK
Note: The gate type is divided into three types: None, NC (Normal Close) and NO
(Normal Open), and the default value of factory is none. The time delay range of the
gate magnetic field is 1-10 seconds. If the gate type is set to a NC type, the gate time
delay is set to 5 seconds. If the verification is successful, but the signal is not closed
even after 5 seconds, an alarm signal will be issued.

15
 4.4.7Access Mode
Device → Lock ctrl. → Access Mode → Set unlock mode and confirm user qty.→
OK
Note: There are two general modes: Yes or NO. The default values of the factory is
No. The total number of confirmations is 1-5, and the factory default value is 1

Ⅴ、USB disk
5.1 All Rec. (Download all attendance data )
U disk → All Rec. → Insert the U disk → OK → Prompt download success

5.2 Enr. Data (Download enrolled user data)

U disk → Enr. Data→ Insert the U disk → OK → Prompt download success

5.3 Load Data (Upload user data)

U disk → Load Data → Insert the U disk → OK → Prompt download success

Ⅵ System Info.
Move the cursor to the machine information item with up and down keys. There
are three sub menus.
1 、 Reg. Data ： It is used to display all kinds of registration information of
current users, including the number of registered users, the number of registered
administrators, the number of facial registration, the number of fingerprint
registration, the number of password registration, the number of card registration,
and the specific information of attendance records.
2 Free Space Info ： It is used to display the remaining capacity in the
attendance machine, including the number of faces, the number of fingerprints, the
number of cards, the number of passwords, and the number of attendance records
3 All Space Info：Display the total capacity of the attendance machine.
4 Product：It is used to show the manufacturer, the name of the equipment and
the software version of the attendance machine, including the 7 contents of the
16
manufacturer, the name of the equipment, the manufacturing date, the serial number,
the version of the fingerprint algorithm, the firmware version and the firmware
upgrade.

Chapter 3 Enclosure

17
Illustration of Correct Fingerprint Pressing

Flatly press fingerprint on U

fingerprint scanner
Try to press fingerprint
center to the middle or a
little upper of U scanner

Wrong Pressing Method

Vertical
Vertical Toopartial
Too partial

Slant Too lower

18
 ： The recommended standing position (see below):
The distance between the recommended personnel
and the equipment is 0.5 meters (1.55 m -1.85
meters for height range). The effect of the face
image can be adjusted according to the
equipment. When the face image is bright, it can
move backward properly; when the face image is
dark, it can move forward properly.

 Recommended facial expression and several facial

expressions that affect the use of facial expressions:

 Recommended
standing
posture and
several standing posture affecting the use effect:
Precautions: please keep natural facial expressions and
standing posture during registration and use.

19
Wiring diagram of entrance guard

20