RLTO EXPANSION AND OFFPLOT

FACILITIES OF THE NORTH FIELD

EXPANSION PROJECT (EPC-3)

CONTRACTOR Doc. COMPANY/CONTRACTOR DOC. No: REV: CONTRACTOR PROJECT

Code: CAL-0006 4 PROJECT No. CONTRACT No.
3998_18-1037002021-00069
10370 LTC/C/NFE/3998/18
DOC. CLASS: 2

TECHNIP ENERGIES PO Nº: 1037002021

UNIT / EQUIP. No.:129C-61-Z-0001/0002 -

129C-96-Z-0002

DOCUMENT TITLE: BASE LOAD DIAGRAM FOR CONDENSATE LOADING ARMS 129C-61-Z-0001, 129C-61-Z-0002 AND
VAPOR RECOVERY ARM 129C-96-Z-0002

VENDOR DOCUMENT Nº: 24BLDC21436502 VENDOR REV: 5

REVIEW RESPONSE BY CONTRACTOR:

CONTRACTOR REVIEW COMMENTS DO NOT INDICATE EITHER RESPONSIBILITY OR LIABILITY FOR ACCURACY AND COMPLETENESS OF THIS DOCUMENT
OR ALTER ANY CONTRACTUAL TERMS AND CONDITIONS.

A - REJECTED C - REVIEWED WITH MINOR COMMENTS F - REVIEWED WITHOUT COMMENTS

B – REVIEWED WITH MAJOR COMMENTS R - AS BUILT I - FOR INFORMATION

DATE :

4 13-NOV-2023 Approved For Construction CTC DJA ARA

3 25-SEP-2023 Approved For Construction CTC DJA ARA

2 30-AUG-2023 Approved For Construction CTC DJA ARA

1 09-MAY-2023 Approved For Construction CTC DJA ARA

0 15-FEB-2023 Approved For Construction CTC DJA ARA

B 20-DEC-2022 Issued For Review CTC DJA ARA

Prepared By Reviewed By Approved By

Rev. Issue Date Revision Description

COMPANY/CONTRACTOR Doc. No 3998_18-1037002021-00069 - REV 4 Page 1 of 5

 T.EN Loading Systems S.A.S
Route des Clérimois CS 10705
89107 Sens Cedex France
www.ten.com

214365C001 TECNICAS REUNIDAS S.A

Marine Loading Arms

129C-61-Z-0001/0002 - 129C-96-Z-0002

BASE LOAD DIAGRAM 16"

5 13/11/2023 Approved For Construction C.TC D.JA A.RA

4 25/09/2023 Approved For Construction C.TC D.JA A.RA
3 30/08/2023 Approved For Construction C.TC D.JA A.RA
2 09/05/2023 Approved For Construction C.TC D.JA A.RA
1 15/02/2023 Approved For Construction C.TC D.JA A.RA
0 20/12/2022 Issued For Review C.TC D.JA A.RA

Prepared Checked Approved

Rev. Issue date Description
by by by

Technip Energies doc

ref.
24BLDC21436502 Page no. 2/5

This document and all information are confidential and may not be used, reproduced or distributed without prior authorization of Technip Energies.
Ce document et toutes ses informations sont confidentiels et ne peuvent être utilisés, reproduits ou distribués sans l’autorisation préalable de Technip Energies.

COMPANY/CONTRACTOR Doc. No 3998_18-1037002021-00069 - REV 4 Page 2 of 5

 Project: ...... 214365C001
Date: .......... 13-Nov-2023
T.EN revision: .............. 5
BASE LOAD DIAGRAM 16’’

REVISION HISTORY

Revision Summary of change Reason for the change By

0 Creation. - C. TCHA
1 Page 4 Updated 350 kg/m3 by 35 MPa C. TCHA
1 Page 4 Added following note: C. TCHA
(*) Bolt description is according
to drawing "RP129C-1-51-0008-
0006 LPB30/31 Metering
Platform Miscellaneous Details"
1 Page 4 Added Title block as per Project C. TCHA
Title Block
2 Page 4 Updated note for concrete S50. C. TCHA
Updated calculated values.
3 All pages Replaced “Rev50 As Built” by C. TCHA
“Rev1 Approved For
Construction”
3 Page 4 Updated locations of holes of C. TCHA
baseplate.
Updated hole diameter value.
3 Page 5 New page regarding dummy C. TCHA
manifold base loads.
4 Page 5 Added plate thickness value. C. TCHA
Updated base plate view.
Added forces and moments on
the view of the dummy manifold.
4 5 Page 4 Added plate thickness value. C. TCHA
Added note for anchor bolt
details.

COMPANY/CONTRACTOR Doc. No 3998_18-1037002021-00069 - REV 4 Page 3 of 5

 Type of Arm : RCMA 16"x75' FP
Stored Mode Stored Mode
Max Wind Earthquake
NOTES :
Maximum Wind Speed : m/s 45.0 -
- Concrete type is S50 (50MPa)
Horizontal Seismic Acceleration : g - 0.061
Vertical Seismic Acceleration : g - 0.020 - Existing anchor bolts must be in good condition and exempt of too important corrosion

P Dead Weight : N (kg) 408100 (41700) 408100 (41700) (*) Bolt description is according to drawing "RP129C-1-51-0008-0006
LPB30/31 Metering Platform Miscellaneous Details"
B Lateral Center of Gravity : m 0.77 0.77
Fv Total Wind Force : N 72000 - 4 - For anchor bolt details (rods, whashers and nuts), refer to document 3998_18-1037002021-00035
Interface Drawing for LPG, Condensate, and Vapor Recovery Loading Arms (T.EN reference:
24001C21436501)
Av Height of Total Wind Force : m 9.18 -
Fsh Horizontal Seismic Force : N - 17426
Fsv Vertical Seismic Force : N - 5713
As Height of Center of Gravity : m - 7.28

M Total Moment Load on Dock : N.m 975197 445497

RLTO EXPANSION AND OFFPLOT

FACILITIES OF THE NORTH FIELD
EXPANSION PROJECT (EPC-3)
Rb Tension in Anchor Bolt : N 68196 9922
CONTRACTOR Doc. CONTRACTOR DOC. No REV. : 4 CONTRACTOR PROJECT CONTRACT
Code PROJECT No. No.
CAL-0006 3998_18-1037002021-00069 10370 LTC/C/NFE/3998/18
Rh Compression on Dock : N 817274 472676 DOC. CLASS: 2

TECHNIP ENERGIES PO Nº 1037002021

Max Stress in Bolt : MPa 70 10

UNIT / EQUIP. No :
129C-61-Z-0001/0002 - 129C-96-Z-0002
Holes Diameter : mm 65
DOCUMENT TITLE:
BASE LOAD DIAGRAM FOR CONDENSATE LOADING ARMS 129C-61-Z-0001, 129C-61-Z-0002 AND VAPOR RECOVERY ARM 129C-96-Z-
0002

Anchor Bolts : Nb x mm 16 x M39 (*)

VENDOR DOCUMENT Nº: VENDOR REV. 5
24BLDC21436502
Base Plate Thickness : mm 40 4
REVIEW RESPONSE BY CONTRACTOR:

Stored position
CONTRACTOR REVIEW COMMENTS DO NOT INDICATE EITHER RESPONSIBILITY OR LIABILITY FOR ACCURACY AND COMPLETENESS OF THIS DOCUMENT OR ALTER ANY
CONTRACTUAL TERMS AND CONDITIONS.

A - REJECTED C - REVIEWED WITH MINOR F - REVIEWED WITHOUT COMMENTS

Typical view of right arm (symmetrical view to consider for left arm)
B – REVIEWED WITH MAJOR R - AS BUILT I - FOR INFORMATION COMMENTS

Locations of drilled holes on arm baseplate (compatible with each arm) DATE :

4 13-NOV-2023 Approved For Construction CTC DJA ARA

3 25-SEP-2023 Approved For Construction CTC DJA ARA
2 30-AUG-2023 Approved For Construction CTC DJA ARA
1 09-MAY-2023 Approved For Construction CTC DJA ARA
0 15-FEB-2023 Approved For Construction CTC DJA ARA
B 20-DEC-2022 Issued For Review CTC DJA ARA
Rev. Issue Date Revision Description Prepared By Reviewed By Approved By

8 TOLERANCES GENERALES
(SAUF INDICATIONS CONTRAIRES)
7 GENERALES TOLERANCE
(UNLESS OTHERWISE SPECIFIED)
6
DIMENSION / DIMENSIONAL : N/A
5 13-Nov-2023 APPROVED FOR CONSTRUCTION

B P & Fsv
ANGULAIRES / ANGULARS : N/A
4 25-Sep-2023 APPROVED FOR CONSTRUCTION

Fv
RUGOSITE / ROUGHNESS : N/A
3 30-Aug-2023 APPROVED FOR CONSTRUCTION MATIERE / MATERIAL :
2 09-May-2023 APPROVED FOR CONSTRUCTION N/A
PLAN REF / REF DRAWING :
1 15-Feb-2023 APPROVED FOR CONSTRUCTION
-

Fsh
0 20-Dec-2022 CREATION / FIRST ISSUE
-
REV. DD/MM/YYYY DESCRIPTION ECN SIGN -

Rh BASE LOAD DIAGRAM

As ATTENTION

Av The exact above dimension

FORMAT : POIDS / WEIGHT (KG) : T.EN Loading Systems SAS

Rb
N/A LOADING SYSTEMS

A3
ROUTE DES CLERIMOIS

are determined based on field

ECHELLE / SCALE : 89107 SENS CEDEX FRANCE - CS 10705
P: +33 3 86 95 87 00 F: +33 3 86 95 19 16

N/A
Rb
WWW.TEN.COM

measurements on Berth 31
DESSINE PAR / DRAWN BY : NUMERO DE PLAN / DRAWING NUMBER : FOLIO / SHEET :

C. TCHA
(Note : Weight and Load estimate +/- 5 %)
APPROUVE PAR / APPROVED BY :

D. JAULT
24BLDC21436502 4/5
CE DOCUMENT ET TOUTES LES INFORMATIONS QU'IL CONTIENT SONT LA PROPRIETE CONFIDENTIELLE ET EXCLUSIVE DE T.EN Loading Systems ET NE PEUVENT ETRE REPRODUITS, UTILISES DIVULGUES OU RENDUSPUBLIC SANS L'AUTORISATION EXPRESS DE T.EN Loading Systems.
THIS DOCUMENT AND ALL THE INFORMATION CONTAINED HEREIN ARE THE CONFIDENTIAL AND EXCLUSIVE PROPERTY OF T.EN Loading Systems AND MAY NOT BE REPRODUCED, USED, DISCLOSED, OR MADE PUBLIC IN ANY MANNER PRIOR TO EXPRESS WRITTEN AUTHORIZATION BY T.EN Loading Systems.

COMPANY/CONTRACTOR Doc. No 3998_18-1037002021-00069 - REV 4 Page 4 of 5

 Type of dummy manifold : Dummy manifold for RCMA 16"x75' FP

Maximum calculated loads at Dummy manifold base plate

Mode Description Load combination
FX (N) FY (N) FZ (N) MX (Nm) MY (Nm) MZ (Nm)
Operation cases
5 DL 0 0 1 970 0 310 0
( No arm connected to dummy manifold ) NOTES :
Arm in maintenance with Wind
5 DL + WLM 6 360 1 210 1 950 1 210 8 530 1 300
( Arm connected to dummy manifold ) - Concrete type is S50 (50MPa)
Arm in maintenance with Wind
5 DL + WLM 370 0 21 940 0 23 350 0
( Only ST80 connected to dummy manifold ) DL = Dead Load : gravity 9.81 m/s
Stored with Max Wind WLM = Wind Load in Maintenance mode : 15 m/s (3s gust wind speed)
1 DL + WLS 880 0 1 970 0 990 0
( No arm connected to dummy manifold ) WLS = Wind Load in Stored mode : 45m/s (3s gust wind speed)
Stored with Earthquake SSE ELSSE = SSE Earthquake Load
10 DL + ELSSE 120 120 2 000 80 390 20
( No arm connected to dummy manifold ) Horizontal Seismic Acceleration = 0.061 g
Vertical Seismic Acceleration = 0.020 g

Plate Thickness : mm 20
Holes Diameter : mm 26
Anchor Bolts : Nb x mm 4xM24

RLTO EXPANSION AND OFFPLOT FACILITIES

OF THE NORTH FIELD EXPANSION PROJECT
(EPC-3)

CONTRACTOR Doc. CONTRACTOR DOC. No REV. : 4 CONTRACTOR PROJECT CONTRACT

Code PROJECT No. No.
CAL-0006 3998_18-1037002021-00069
10370 LTC/C/NFE/3998/18
DOC. CLASS: 2

TECHNIP ENERGIES PO Nº 1037002021

UNIT / EQUIP. No :
129C-61-Z-0001/0002 - 129C-96-Z-0002

DOCUMENT TITLE:
BASE LOAD DIAGRAM FOR CONDENSATE LOADING ARMS 129C-61-Z-0001, 129C-61-Z-0002 AND VAPOR RECOVERY ARM 129C-96-Z-0002

VENDOR DOCUMENT Nº: VENDOR REV. 5

24BLDC21436502

REVIEW RESPONSE BY CONTRACTOR:

CONTRACTOR REVIEW COMMENTS DO NOT INDICATE EITHER RESPONSIBILITY OR LIABILITY FOR ACCURACY AND COMPLETENESS OF THIS DOCUMENT OR ALTER ANY
CONTRACTUAL TERMS AND CONDITIONS.
500 mm

A - REJECTED C - REVIEWED WITH MINOR F - REVIEWED WITHOUT COMMENTS

B – REVIEWED WITH MAJOR R - AS BUILT I - FOR INFORMATION COMMENTS

DATE :

FZ
MZ 4 13-NOV-2023 Approved For Construction CTC DJA ARA
500 mm 400 mm 3 25-SEP-2023 Approved For Construction CTC DJA ARA
2 30-AUG-2023 Approved For Construction CTC DJA ARA
1 09-MAY-2023 Approved For Construction CTC DJA ARA
0 15-FEB-2023 Approved For Construction CTC DJA ARA
B 20-DEC-2022 Issued For Review CTC DJA ARA
Z
FY Rev. Issue Date Revision Description Prepared By Reviewed By Approved By

ARM SIDE
MY Y FX
400 mm 8 TOLERANCES GENERALES
(SAUF INDICATIONS CONTRAIRES)

X 7 GENERALES TOLERANCE
(UNLESS OTHERWISE SPECIFIED)
6
MX BASE PLATE DETAIL 5 13-Nov-2023 APPROVED FOR CONSTRUCTION
DIMENSION / DIMENSIONAL : N/A

ANGULAIRES / ANGULARS : N/A

4 25-Sep-2023 APPROVED FOR CONSTRUCTION
RUGOSITE / ROUGHNESS : N/A
3 30-Aug-2023 APPROVED FOR CONSTRUCTION
MATIERE / MATERIAL :
2 09-May-2023 APPROVED FOR CONSTRUCTION N/A
PLAN REF / REF DRAWING :
1 15-Feb-2023 APPROVED FOR CONSTRUCTION
-
0 20-Dec-2022 CREATION / FIRST ISSUE
-
REV. DD/MM/YYYY DESCRIPTION ECN SIGN -

SEA SIDE
BASE LOAD DIAGRAM

FORMAT : POIDS / WEIGHT (KG) : T.EN Loading Systems SAS

N/A LOADING SYSTEMS

A3
ROUTE DES CLERIMOIS
89107 SENS CEDEX FRANCE - CS 10705
ECHELLE / SCALE :
P: +33 3 86 95 87 00 F: +33 3 86 95 19 16

N/A WWW.TEN.COM

DESSINE PAR / DRAWN BY : NUMERO DE PLAN / DRAWING NUMBER : FOLIO / SHEET :

C. TCHA
(Note : Weight and Load estimate +/- 5 %)
APPROUVE PAR / APPROVED BY :

D. JAULT
24BLDC21436502 5/5
CE DOCUMENT ET TOUTES LES INFORMATIONS QU'IL CONTIENT SONT LA PROPRIETE CONFIDENTIELLE ET EXCLUSIVE DE T.EN Loading Systems ET NE PEUVENT ETRE REPRODUITS, UTILISES DIVULGUES OU RENDUSPUBLIC SANS L'AUTORISATION EXPRESS DE T.EN Loading Systems.
THIS DOCUMENT AND ALL THE INFORMATION CONTAINED HEREIN ARE THE CONFIDENTIAL AND EXCLUSIVE PROPERTY OF T.EN Loading Systems AND MAY NOT BE REPRODUCED, USED, DISCLOSED, OR MADE PUBLIC IN ANY MANNER PRIOR TO EXPRESS WRITTEN AUTHORIZATION BY T.EN Loading Systems.

COMPANY/CONTRACTOR Doc. No 3998_18-1037002021-00069 - REV 4 Page 5 of 5