`

LUCKY ENGINEERING
(An ISO 9001:2008 Certified Company)

Head Office- H313, F.F, Sushant Shopping Arcade, Sushant Lok-I, Gurugram-122009
Email- [email protected], +91 9560002385, +91 9871650405

Registered Address- L-2/60, Hume Pipe Road Near Jail Chowk Sakchi, Jamshedpur, PIN –
831001, Email –[email protected], Mob-+91 9386728640

Page 1 of 13
INTRODUCTION:

Lucky Engineering was set up in 2003 by a team of experienced Engineers in

the field of providing Engineering Consultancy, Construction and Operation &
Maintenance of Steel Plant & Captive Power Projects. We along with our
associates possesses world-class engineering technologies and outstanding
project management capabilities in all processes of Integrated Steel Complexes
from Mining, Beneficiation, Palletization of Ore, Sponge Iron making, Captive
Power Plants, Steel Making, including Continuous Casting, LRF and finished
product through Rolling Mills.

Earlier this team had been worked with Predominant Engineers &
Contractor Pvt. Ltd. This team has been associated with numerous coal-
based Sponge Iron Plants & Captive Power Plant in India & Abroad.

The team has requisite expertise and has been instrumental in execution of
several Steel Projects as listed below-

1) African Natural Resources & Mines Limited, Nigeria- 2x600TPH Iron Ore
Crushing Plant, Beneficiation Plant, Project Management, Procurement
Assistance, Design Vetting of 2x350TPD DRI Plant, Civil Design for
Power Plant, Design of Belt Conveyor System for 2x350TPD DRI Plant
and 2x600TPH Iron Ore Crushing Plant, Design of Water System,
Balance of Plant.
2) Devki Steels Ltd, Kenya- 2 x 500TPD DRI Plant, 40MW Power Plant,
3,00,000TPA SMS & Rolling Mill
3) Swastik Rolling Mills Pvt Ltd, Nepal- 1,50,000TPA Rolling Mill
4) Tata Sponge Iron Ltd, Joda- Renovation of 1 x 375 TPD DRI Plant
5) Super Smelters Ltd., Jamuria- 1 x 350 TPD DRI Plant
6) Trimula Industries Ltd., Singrauli- 1 x 350 TPD DRI Plant & 38.5MW
Power Plant
7) OCL, Iron & Steel Limited- 2 x 350 TPD DRI Plant, 70 MW Power Plant,
1 x 300 Ton Coal Washery
8) Usha Martin Ltd, Gamharia- 2 x 350 TPD DRI Plant
Etc.

We are associated with Consultancy and are providing them with Basic &
Detailed Design & Engineering support.

Page 2 of 13
At Lucky Engineering, we always focus on meticulous Project Planning with
time tested designs and implementing them speedily to cater to the needs of
our clients. Our spectrum of services starts from the stage of Concept to
Commissioning, providing customized solutions to suit the specific
requirement of the Clients. Our services include complete detailed Civil,
Structural design and drawings including Mechanical, Electrical &
Instrumentation details for the projects.

Lucky Engineering provides single window solutions to help our clients realize
their Product Development, Project Management and Strategies, using best-in-
class technologies, processes, information and competencies along with
adherence to safety factors.

The teams of Lucky Engineering have wide experience in the followings areas.

Steel Making

 SPONGE IRON PLANTS

 IRON ORE CRUSHING PLANT
 PELLETISATION PLANT
 IRON ORE BENEFICIATION PLANT

Power Generation

 COGENERATION POWER PLANTS

 TURBINE WITH ALL ALLIED FACILITIES
 WASTE HEAT RECOVERY BOILER
 ATMOSPHERIC FLUIDIZED BED COMBUSTION BOILER
 AIR COOLED CONDENSER

We are also carrying out the Design & Detailing Work on customer
requirement basis like Building Foundation, Conveyor Trestle Support,
Detailed Conveyor GA, Conveyor parts, Conveyor Technological & Super
Structure, Industrial Building Structure, any Hopper, Storage Silo, Shed,
Truss with Staad Pro Analysis etc.

We are also carrying out the Construction Work for Complete Sponge Iron
Projects, ESP, Raw Material Handling System, Steel Plant Building Structure
etc and also carrying out the Revamping Work & Operation & Maintenance
Work for Steel Plants.

Page 3 of 13
We have undertaken the following projects and implementing them
successfully to our client’s entire satisfaction.

List of projects under execution-

1. Complete Fabrication & Erection Work of 1x600 TPD DRI Project for
Spintech Tubes Pvt Ltd. at Jamuria, West Bengal.

2. Fabrication & Erection Work of 500 TPD DRI Project for Shah
Sponge & Power Ltd at Singhbhum, Jharkhand.

3. Complete Fabrication & Erection Work of 600 TPD DRI Project for
Rungta Mines Ltd (Karakhendra Steel Plant) at Barbil, Kendujhar,
Odisha.

4. Complete Fabrication & Erection Work of 2x500 TPD DRI Project for
SWM Ispat Pvt Ltd. at Deoli, Maharashtra

5. Complete Erection Work of 650 TPD DRI Project for Real Ispat &
Energy Pvt Ltd. at Bakulahi, Chhattisgarh

6. Design & Engineering for Modifications in Complete 500TPD DRI

Plant for Ramsarup Industries Limited at Kharagpur, West Bengal.

7. Design & Engineering for Replacement of Trolley Arrangement into

Hydraulic Operated Transfer Chute along with Supporting Structure
in 500TPD DRI Plant for Ramsarup Industries Limited at Kharagpur,
West Bengal.

8. Design & Engineering for Modifications in 600TPD DRI Plant for

Ankur Udyog Limited (Steel Division) at Gorakhpur, Uttar Pradesh.

9. Revamping of Complete 500TPD DRI Plant for Ramsarup Industries

Ltd, Kharagpur.

10.Fabrication & Erection for Modification of Complete 500TPD DRI

Plant for Ramsarup Industries Ltd, Kharagpur.

Page 4 of 13
11.Design & Drawing for Char Handling System for SHYAM SEL AND
POWER LIMITED., JAMURIA, WEST BENGAL at Jamuria, West
Bengal.

12.Design & Drawing for Complete Coal Handling System, Feed &
Injection System, Product Handling System for SHYAM SEL AND
POWER LIMITED., JAMURIA, WEST BENGAL, for their 2x600TPD DRI
Plant at Jamuria, West Bengal.

13.Design & Drawing for Various Equipment for SHYAM SEL AND
POWER LIMITED., JAMURIA, WEST BENGAL, for their Existing DRI
Plant at Jamuria, West Bengal.

14.Turnkey Basis Project- 1x350TPD DR Plant, 38TPH Boiler, SMS &

Coal Washery for B.S. ISPAT LTD, Nagpur

15.Complete Erection Work of 2 x 600 TPD DRI Project for MAHAVIR

FEERO ALLOYS LTD., ROURKELA, ORISHA.

16.Design, Engineering Consultancy, Detailing Work & Erection Work

of 2 x 600 TPD DRI Project for SHYAM SEL AND POWER LIMITED.,
JAMURIA, WEST BENGAL.

17.Design & Detailing work of Structural Steel for HOLTEC

CONSULTING PRIVATE LIMITED.

18.Complete Erection Work of 2 x 350 TPD DRI Project for B S

SPONGE, RAIGARH.

19. SMS & 600TPD DRI Project for Nilachal Iron & Power Limited,
Kandra

20.Operation & Maintenance of 2x100TPD DRI Plant & 10MW Power

Plant for B.S. Ispat Ltd, Nagpur

21.Layout Modification Work for IOCL, Asoati

Page 5 of 13
 List of Projects- COMPLETED
(Construction)

1. Maintenance Work of DRI Plant for MSP Metallics Limited, Jharsuguda,

Orisha.
2. Maintenance Work of 4x100TPD DRI Plant for SPS-II, Purulia, West
Bengal.
3. Complete Erection Work of 4 x 350 TPD DRI Project for SHYAM SEL
AND POWER LIMITED., JAMURIA, WEST BENGAL.
4. Iron Ore Circuit at TATA Sponge iron Ltd., Beleipada (2015)
5. 2 x 350 TPD DRI Projects at OISL, Rajgangpur, Odisha. (2013-15)
6. MANPOWER RECRUITMENT for 350 TPD DRI at Gallant Ispat Ltd.
Gorakhpur, (2017-18)
7. 6 x 350 TPD at SHYAM SEL & POWER LTD. (2014-20)
8. 2 x 350 TPD DRI plants at Usha Martin Ltd. (2010-2013).
9. Pellet plant projects (Equipment’s) at Usha Martin Ltd.
10. BRAHAMAPUTRA METALICS LTD, Ranchi-350 T.P.D SPONGE, TG
BUILDING (25MW) along with SMS totals mechanical Construction.
11. BHOOMI MINERALS LTD, Chirkunda- 100T.P.D turnkey project.
12. VIRAJ STEEL & ENERGY LTD, Gurupali, Sambalpur- KILN-II.
13. GALLANT ISPAT LTD, Gorekhpur-350 T.P.D KILN.
14. SUNIL ISPAT, Raigarh-KILN-I.
15. TIMES ISPAT & POWER LTD, ROURKELLA-TG BUILDING (25MW)&
SMS
16. TRIMULA INDUSTRIES LIMITED, SINGRAULI-TG BUILDING (38.5MW)
17. COKE OVEN ERECTIONN AND COMISSIONING JOB AT USHA MARTIN
Ltd., JAMSHEDPUR.
18. USHA MARTIN, JAMSHEDPUR-DE SYSTEM.
19. BALL MILL PROJECT AT USHA MARTIN LTD. 2015.

Page 6 of 13
 SHUTDOWN JOBS- COMPLETED

1. Support Roller Bearing Replacement for ESPL, Jharsuguda

2. Girth Gear & Pinion Replacement for Real Ispat, Bhatapara,
Chhattisgarh
3. Kiln Inlet Sealing System Replacement for Super Smelter Ltd, Jamuria
4. Girth Gear Reversal for Shyam Sel, Jamuria
5. Repair of Kiln Inlet Sealing System for Tembo Steels Uganda Ltd,
Uganda.
6. Maintenance Work for THERMAX ESP (100 TPD Kiln), GOPANI IRON &
POWER LTD.
7. Fabrication Erection & Dismantling for 100 TPD ESP-3, LLOYDS
METALS & ENERGY.
8. Cooler I/L & O/L Slip Seal Segment Replacement, Lloyds Metals &
Energy, Ghugus
9. 100 TPD Girth Gear and Drive alignment (Kiln-2 & 3), Lloyds Metals &
Energy.
10. ESP job work in 15 CPP Shutdown, Rungta Mines Chaliyama Plant.
11. Kiln Main Drive and Cooler Main Drive (350 TPD) Maintenance Job
during Shutdown, Gallant Ispat Ltd.
12. Girth Gear reversal Job at Usha martin Ltd, (350 TPD) , Lloyds Metal &
Energy Ltd (500 TPD). Uttam Galva Metallics Ltd.(Pellet Plant)
13. 350 TPD DRI, Cooler Shell replacement job at Usha Martin Ltd.
Jamshedpur.
14. Cooler I/L & O/L Slip Seal Segment Replacement, USHA MARTIN LTD.
Jamshedpur.
15. Maintenance And Repair Services Of Other Machinery And Equipment’s
Cold Kiln Alignment, VARSANNA ISPAT LTD. (Kutch, Gujrat)- 2018
16. Kiln Girth Gear Reversal & Profile Matching Varsanna Ispat Ltd.
(Kutch, Gujrat), 2018
17. Kiln Girth Gear Reversal & Profile Matching, LLOYDS METAL &
ENERGY, Ghugus.

Page 7 of 13
18. Kiln Shell replacement job, (350 TPD) Usha Martin Ltd., Jamshedpur
2014.
19. Coal crushing circuit maintenance at Usha Martin Ltd., Jamshedpur
20. Iron ore Circuit at Usha Martin Ltd., Jamshedpur.
21. Alignment work of MND Girth Gear and Pinion, Usha Martin Ltd. (350
TPD DRI)
22. Chair Pad Replacement under the types of C & D stations, Monnet
Ispat & Energy Ltd.- 2013.
23. Chair Pad replacement job at LLYODS Metals & Energy, Ghugus.
24. ABC maintenance job, at Usha martin ltd.
25. BAG house filter job under Welltech Environmental Engineering Pvt.
Ltd.

Page 8 of 13
SOME PHOTOGRAPHS

Page 9 of 13
Page 10 of 13
KEY MANAGEMENT PERSONNEL

Vijay Kumar Singh- Managing Director

Bachelor’s Degree in Metrology. Worked for

Aadhunik group, Steel Division, after this he
established LUCKY ENGINEERING in 2003. He got
a valuable experience of more than 22 years in the
DRI operational background.

T.K. Sinha- Director- Technical

M.Tech- Mechanical,
Has more than 42 Years Experience in Turnkey
Projects Execution of Lime Calcination, Mineral
Beneficiation, Iron & Coal Washery, Sponge Iron &
SMS Projects Execution.
Additional-Repair & Mechanical Maintenance,
Commissioning of Hydraulic Excavator (L&T
Poclain)

Swaminathan- V.P.-Operation

Has done M.Sc and Having over 30 years of

experience, he has expertise in Metallurgy, Quality
Enhancement & Efficiency optimization .

Page 11 of 13
 Swastik Nayak- G.M.-Construction

Completed Diploma in Mechanical Engineering

Has more than 20 Years’ Experience in Steel Plant
Construction.

ANIL KUMAR- HOD (Civil & Structure)

Completed Diploma in Civil Engineering.

Has more than 18 Years’ Experience in all kind of
Civil and Structural Design & detailing for Steel &
Power Projects. He has been associated with the
projects of Viraj Steel & Power Ltd, Usha Martin Ltd,
Trimula Industries Ltd, Super Smelters Ltd, Tata
Sponge Iron Ltd. & Zen Global Nigeria

NAVEEN JAIN- HOD (Mechanical)

Completed B.Tech. in Mechanical Engineering in

2008 from Uttar Pradesh Technical University. He has
more than 15 Years’ Experience in Steel, Power
Projects & Water Projects. Has been actively
associated in Design, Project Management, and Site
Activity of Trimula Industries, Usha Martin Ltd,
Super Smelters Ltd, Tata Sponge Iron Ltd.,
Government Projects- PHED- Rajasthan, Zen Global
DMCC, ANRML, Nigeria

Page 12 of 13
 MANISH CHOUDHARY- Manager- Electrical

B.Tech in Electrical Engineering from National

Institute of Technology, Silchar, Assam. Has more
than 12 Years’ Experience in Steel & Power Plant
Electrical Engineering.

PUNEET GUPTA- Associates

M.E. (Structures) from Delhi College of Engineering,

Associate Member of Institution of Engineers. Has
more than 18 Years Experience in Design of Structure.
Having a vast experience in field of design of all kind
of Building Structure.

BIPIN MAMGAIN- Associates

B.Tech- Civil Engineering from Malviya National

Institute of Technology, Jaipur, Skillful, accomplished
and highly creative Structural Design professional
with over 18 years of progressive experience in
Design & Detailing Engineering pertaining to RCC
Structures & Steel Structures across Large-Scale
construction projects.

Page 13 of 13