Wheel Loader - CATERPILLAR 924Hz Specalog
Wheel Loader - CATERPILLAR 924Hz Specalog
Wheel Loader - CATERPILLAR 924Hz Specalog
Wheel Loader
2
Power Train
Delivers maximum rimpull to the ground and full power to loader hydraulics.
3
Hydraulics
System provides high efficiency with low effort, precise control.
Proven Design
Time tested hydraulic system provides low effort operation and
superior control. Fast loader cycle times help you get more
done.
Dual Hydraulic Pumps System
Load-sensing steering pump provides outstanding response
during heavy and light duty operations.
High output implement pump provides all the hydraulic power
required to move loads at all engine speeds.
Ride Control
The optional Ride Control System provides a comfortable ride
and excellent material retention.
Nitrogen charged accumulator enables optimum cushioning over
uneven terrain for all loads and speeds.
The system operates in Automatic – as the loader ground speed
exceeds 5 km/h the system will activate, below 5 km/h the
system is off providing maximum lift power.
Loader Linkage
Strong design delivers superior
performance.
Z-Bar Design
Z-bar linkage generates excellent breakout force and good
rack back angle for better bucket loading and load retention.
Lift arms are solid steel, providing superior strength with an
excellent front end viewing area. The proven design offers
excellent dump clearance and reach for exceptional truck
loading performance.
4
Operator Station
Superior comfort keeps you productive, all day long.
5
Buckets
Cat Buckets are built for high performance.
6
Serviceability
Easy access and minimal maintenance requirements keep
your machine on the job.
Convenient service features make maintenance easy
All service points are accessible from ground level on the right
side of the engine. Gull-wing doors with gas struts lift for
exceptional access to filters and service points. Extended service
intervals reduce service time and increase machine availability.
• Sight gauges let you easily check radiator coolant, hydraulic
oil and transmission oil levels as well as engine air filter
restriction without opening the air cleaner.
• Standard pressure taps allow quick diagnosis of the entire
hydraulic system.
• S•O•SSM ports make oil sampling quicker, cleaner and provide
the best oil sample for analysis.
• Spin-on filters for engine oil, transmission oil and hydraulic
oil are vertically mounted for easier servicing.
• 924Hz features a standard electronic fuel prime pump.
• Sequentially placed radiator and oil coolers are easy to access.
• Swing-out cooling fan allows quick and easy cleaning and
servicing of the radiator. The fan is hydraulically driven and
separate from the engine compartment for low noise operation.
• Optional reversing fan cleans screens without interrupting
machine operation.
Customer Support
Unmatched support makes the
difference
Your Cat dealer is ready to assist you with your
purchase decision and everything after.
• Make comparisons of machines, with estimates of
component life, preventative maintenance and cost of
production.
• Financing packages are flexible to meet your needs.
• Your Cat dealer can evaluate the cost to repair, rebuild and
replace your machine, so you can make the right choice.
• For more information on Cat products, dealer services and
industry solutions, visit us at www.cat.com.
7
924Hz Wheel Loader Specifications
Model: Cat® C6.6 ACERT™, Bucket capacities 1.7-2.1 m3 Output at 2300 engine rpm
6 cylinder, turbocharged, direct injection, and 69 bar with SAE 10 W
2300 rpm rated speed oil at 65° C 152 L/min
Rated Power Weight Pump flow – implement
Net: ISO 9249 and pump 152 L/min
80/1269/EEC 97/132 kW/hp Operating weight 11 020 kg Relief pressure – implement
Gross: ISO 14396 98/133 kW/hp pump 259 bar
• Specifications shown are for 924Hz with Maximum working pressure 259 bar
Max. Power
optional counterweight, standard lubricants,
Net: ISO 9249 and full fuel tank, deluxe cab, Limited Slip rear
Hydraulic cycle time Seconds
80/1269/EEC 104/141 kW/hp axle with heavy duty brakes, additional Raise 5.2
Gross: ISO 14396 and guarding, 2.1 m3 bucket with bolt-on Dump 1.1
SAE J1995 105/143 kW/hp cutting edge, 80 kg operator and Lower, empty, float down 2.7
20.5 R 25 radial (L-3) XHA tires.
Peak torque Total 9
Net: ISO 9249 and Lift cylinders, double acting:
80/1269/EEC 668 Nm Bore 107.9 mm
Steering
Gross: ISO 14396 672 Nm Stroke 755 mm
Bore 105 mm Steering articulation 40° Tilt cylinder, double acting:
Stroke 127 mm Minimum turning radius Bore 120.6 mm
Displacement 6.6 L (over tire) 5070 mm Stroke 520 mm
Steering angle, each direction 40°
• Net Power ratings are tested at the
reference conditions for the specified Steering cylinders, two, bore 70 mm
standard. Hydraulic output Service Refill Capacities
• Net power shown is the power available at at 2300 engine rpm
the flywheel when the engine is equipped and 69 bar 104 L/min liter
with alternator, air cleaner, muffler and fan Maximum working pressure 207 bar Fuel tank 225
at minimum speed.
Cooling system 32
• No derating required up to 3000 m altitude.
Auto derate protects hydraulic and Crankcase 16.5
transmission systems. Transmission 23
• The Caterpillar® C6.6 engine meets Differentials and final drives:
Stage III off-highway emission regulations.
Front 21
Rear 21
Engine Torque Hydraulic system (including tank) 125
Hydraulic tank 70
Nm kW/hp
700 120
924Hz Net Torque
600 100 924Hz Net Power
500
80
Net Torque
Net Power
400
60
300
40
200
100 20
0 0
800 1000 1100 1200 1400 1600 1800 2000 2200 2300
rpm
8
924Hz Wheel Loader Specifications
Operating Specifications
9
924Hz Wheel Loader Specifications
Dimensions
All dimensions are approximate. Dimensions may vary with bucket. Refer to Operating Specifications.
15
24
16 13 23
14
1 12
11
2 10
18
3 25
17
4
5 19
7 8 20
21
9 22
6
10
Operating Specifications
Pin-On Buckets
10 Dump clearance at full lift and 45° discharge * mm 2826 2757 2722
Reach with lift arms horizontal and bucket level mm 2059 2156 2205
20 Digging depth * mm 43 51 56
24 Loader clearance radius with bucket in carry position * mm 5616 5646 5649
Specifications shown are for 924Hz with cab with A/C, optional counterweight, limited slip axles, heavy duty rear brakes, additional guarding, sound
suppression, work tool, 80 kg operator and Michelin 20.5 R 25 L-3 XHA tires.
* Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE-Standards
J732 JUN92 and J742 FEB85 governing ratings.
**Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standards specifies the cutting edge.
Other Ground Engaging Tools available, consult your Cat dealer.
11
924Hz Wheel Loader Specifications
Supplemental Specifications
12
Typical Material Densities – Loose
kg/m3 kg/m3
Basalt 1960 Gypsum
Bauxite, Kaolin 1420 broken 1810
Clay crushed 1600
natural bed 1660 Limestone
dry 1480 broken 1540
wet 1660 crushed 1540
Clay and gravel Sand
dry 1420 dry, loose 1420
wet 1540 damp 1690
Decomposed rock wet 1840
75% rock, 25% earth 1960 Sand and clay
50% rock, 50% earth 1720 loose 1600
25% rock, 75% earth 1570 Sand and gravel
Earth dry 1720
dry, packed 1510 wet 2020
wet, excavated 1600 Sandstone 1510
Granite Shale 1250
broken 1660 Slag
Gravel broken 1750
pitrun 1930 Stone
dry 1510 crushed 1600
dry, 6-50 mm 1690
wet, 6-50 mm 2020
Material Density
1.8
2.1
13
924Hz Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for details.
ELECTRICAL Adjustable tilt steering column S•O•S oil sampling port, engine oil
Alternator, 95-amp brushless Coat hook S•O•S oil sampling port, transmission oil
Batteries, maintenance-free, 950 CCA, (2) Ground level door release Torque converter
Directional signals (front & rear) Horn, steering wheel mounted (electric) Transmission, 4F/3R, autoshift, single lever
Starting and charging system, 24V Hydraulic control lever lockout control with F/N/R and kickdown button
Halogen work lights (front & rear) Interior light Transmission neutralizer; operator
programmable
Ignition key start/stop switch Lighter
HYDRAULICS
Roading lights Lunch box storage with cup holder
Hydraulic diagnostic connectors
Starting aid, thermal Pilot hydraulic implement controls
Heavy duty hydraulic oil cooler
Switch, battery disconnect Rear window defroster, electric
Hydraulic control, 2-valve, 1-lever with
Rear view mirrors (2 inside) F/N/R
OPERATOR ENVIRONMENT
Seat, adjustable suspension, armrest Load-sensing steering system
Standard two door cab includes all (fabric or vinyl)
of the following items: S•O•SSM oil sampling port, hydraulic oil
Seat belt,
Sun visor
Tinted safety glass, front OTHER STANDARD EQUIPMENT
Radio ready kit
Tool box Antifreeze/coolant, extended-life
External mirrors protects to –36° C
Wet arm wiper/washer (front & rear),
Work lights, four cab-mounted (two front, two front intermittent Automatic bucket positioner/fork positioner
rear)
Brakes, secondary and parking
Sealed Instrument Gauge: POWER TRAIN
Counterweight
• Engine RPM Engine, Cat C6.6 ACERT
Engine enclosure, lockable
• Hydraulic oil temperature • Low emission diesel engine
Fenders, front
• Engine coolant temperature • Noise reduction technology
Hitch, recovery
• Torque converter oil temperature • Smart waste gate turbocharger
Loader linkage, z-bar
• Fuel level • Aftercooled
Lift kickout, automatic
• Digital LCD speedometer, hour meter/ • Closed Circuit Breather
odometer Machine Security System ready
• Electronically controlled
Indicator Lights: Product Link ready
• Dust Bowl Pre-Cleaner
• Turn signal Remote grease lines
Air cleaner, dry type
• Primary steering malfunction Steering stops, cushioned
Axle seal guards, integrated
• Hydraulic oil bypass Swing-out, hydraulically driven demand fan
Brakes, enclosed wet-disc full hydraulic
• Parking brake applied Vandalism protection, lockable service points
Differentials, diff-lock on front
• Brake charge pressure low Visual indicators:
Differentials, conventional rear
• Transmission oil temperature • air cleaner service
Driveshaft, lubed for life
• General warning • coolant level
Electric fuel prime pump
• Electrical system voltage low • hydraulic oil
Engine speed control
• Fuel water separator • transmission oil
Fuel/water separator
• Engine oil temperature Standard equipment may vary. Consult your
Muffler Caterpillar dealer for details.
• Bright lights activated Radiator, unit serviceable
14
924Hz Optional Equipment
Optional equipment may vary. Consult your Caterpillar dealer for details.
15
924Hz Wheel Loader
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at HEHL3664 (09-2008) hr
www.cat.com
Materials and specifications are subject to change without notice. Featured machines in photos
may include additional equipment. See your Caterpillar dealer for available options.