Scribd
Upload
57 views6 pages

Tech Note 961 - Configuring Archestra Server For InBatch

This document provides steps to configure ArchestrA Security for InBatch. It describes prerequisites including having ArchestrA Security-enabled users configured. The steps include configuring access names in TagLinker, starting the Security Editor and changing the security mode to ArchestrA. It also covers browsing for and mapping ArchestrA users in the User/Group Accounts Editor.

Uploaded by

profilemail8
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views6 pages

Tech Note 961 - Configuring Archestra Server For InBatch

This document provides steps to configure ArchestrA Security for InBatch. It describes prerequisites including having ArchestrA Security-enabled users configured. The steps include configuring access names in TagLinker, starting the Security Editor and changing the security mode to ArchestrA. It also covers browsing for and mapping ArchestrA users in the User/Group Accounts Editor.

Uploaded by

profilemail8
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Configuring ArchestrA Security for InBatch

Tech Note 961


Configuring ArchestrA Security for InBatch

All Tech Notes, Tech Alerts and KBCD documents and software are provided "as is" without warranty of any kind. See the Terms of Use for more information.

Topic#: 002781
Created: April 2013

Introduction
This Tech Note describes the procedure for configuring ArchestA Security inside of InBatch.

Application Version
InBatch 9.x

Prerequisites
ArchestrA Security-enabled users configured and ready to be mapped to InBatch Security.

Ensure that proper license is installed for System Platform.

A Platform must be deployed to the InBatch Server Node in order to use ArchestrA Security for InBatch.

The IDE must also be installed to browse the Galaxy name space. Otherwise, Galaxy attributes and users must be mapped
manually.

Procedure
1. Ensure that in TagLinker under Edit/Access Names, the GR Node Name and Galaxy Name are configured as shown in Figure 1
(below).

2. Make sure that you click Change in Figure1 and also validate the TagLinker (File/Validate from TagLinker).

file:///C|/inetpub/wwwroot/t002781/t002781.htm[4/24/2013 10:59:02 AM]


Configuring ArchestrA Security for InBatch

FIgurE 1: AccESS NaMES fOr tHE GalaXY NODE anD GalaXY NaME

If the Access names are not configured correctly, starting the Security Editor will generate the following message (Figure 2 below).

FIgurE 2: SEcurItY EDItOr MESSagE WHEn AccESS NaMES arE IncOrrEct

3. Start the Security Editor from the Environment Display.

4. Login using system/system for username/password. The Security Editor appears (Figure 3 below).

file:///C|/inetpub/wwwroot/t002781/t002781.htm[4/24/2013 10:59:02 AM]


Configuring ArchestrA Security for InBatch

FIgurE 3: InBatcH SEcurItY EDItOr

5. Click the ArchestrA option (Figure 3 above), then click Change. The following message appears.

FIgurE 4: CHangIng tHE SEcurItY MODE

file:///C|/inetpub/wwwroot/t002781/t002781.htm[4/24/2013 10:59:02 AM]


Configuring ArchestrA Security for InBatch

6. Click Yes and close the Security Editor.

Note: Changing the Security Mode requires restarting the Environment Display. Clicking File/Exit-Shutdown from the Environment
Display and restarting the Environment Display restarts InBatch Security Manager.

7. Launch the Security Editor from Environment Display. Login to the Security Editor using Administrator/Password that you use for
ArchestrA Security. The Security Editor window appears.

FIgurE 5: SEcurItY EDItOr

8. Click Edit/UserGroups-Accounts. The User/Group Account Editor appears (Figure 6 below).

file:///C|/inetpub/wwwroot/t002781/t002781.htm[4/24/2013 10:59:02 AM]


Configuring ArchestrA Security for InBatch

FIgurE 6: USEr/GrOuP AccOuntS EDItOr

9. Click the Browse button. The Browse for Archestra Users window appears (Figure 7 below).

file:///C|/inetpub/wwwroot/t002781/t002781.htm[4/24/2013 10:59:02 AM]


Configuring ArchestrA Security for InBatch

FIgurE 7: BrOwSE fOr ArcHEStrA USErS

Note: The rest of the configuration is same as for Standard InBatch Users. If you experience problems, contact Invensys Support.

S. Mariyala

Tech Notes are published occasionally by Wonderware Technical Support. Publisher: Invensys Systems, Inc., 26561 Rancho Parkway South, Lake Forest, CA 92630. There is also
technical information on our software products at Wonderware Technical Support.

For technical support questions, send an e-mail to [email protected].

Back to top

©2013 Invensys Systems, Inc. All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying, recording, broadcasting, or by anyinformation storage and retrieval system, without permission in writing from Invensys Systems, Inc.
Terms of Use.

file:///C|/inetpub/wwwroot/t002781/t002781.htm[4/24/2013 10:59:02 AM]

You might also like