Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    01 GTSM 3

    Uploaded by

    subash1688
    1) Mr. Krishnan Kutty qualified as a welder according to ASME IX standards for pipe welding. 2) He qualified to weld SA 516 Grade 70 steel plate and pipe with diameters of 24 inches and above using SMAW and GTAW processes in the 3G position with solid filler metal. 3) Visual and mechanical testing of the completed welds were satisfactory according to test reports, qualifying the welder.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    01 GTSM 3

    Uploaded by

    subash1688
    19 views1 page
    1) Mr. Krishnan Kutty qualified as a welder according to ASME IX standards for pipe welding. 2) He qualified to weld SA 516 Grade 70 steel plate and pipe with diameters of 24 inches and above using SMAW and GTAW processes in the 3G position with solid filler metal. 3) Visual and mechanical testing of the completed welds were satisfactory according to test reports, qualifying the welder.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) Mr. Krishnan Kutty qualified as a welder according to ASME IX standards for pipe welding. 2) He qualified to weld SA 516 Grade 70 steel plate and pipe with diameters of 24 inches and above using SMAW and GTAW processes in the 3G position with solid filler metal. 3) Visual and mechanical testing of the completed welds were satisfactory according to test reports, qualifying the welder.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    19 views1 page

    01 GTSM 3

    Uploaded by

    subash1688
    1) Mr. Krishnan Kutty qualified as a welder according to ASME IX standards for pipe welding. 2) He qualified to weld SA 516 Grade 70 steel plate and pipe with diameters of 24 inches and above using SMAW and GTAW processes in the 3G position with solid filler metal. 3) Visual and mechanical testing of the completed welds were satisfactory according to test reports, qualifying the welder.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    WELDER PERFORMANCE QUALIFICATION (WPQ)

    In accordance with ASME IX for Pipe Welding

    Welder Name: Mr. KRISHNAN KUTTY


    Welder ID.No : W #01
    Test Description: (Process Type: Manual)
    Identification of WPS No: FFZ/WPS/ORLY/37 Rev.01
    Specification of Base Metal: Overlay on SA 516 Gr. 70

    Test Condition and Qualification Limits:

    Welding Variables Actual Values Range Qualified


    Welding Process SMAW + GTAW SMAW + GTAW

    Backing With With

    Base Metal: P - Number SA 516 Gr. 70 (P1) P1 TO P11, P34, P41 TO P49

    F – Number F42, F34 F34, F41 TO F46

    Deposited Weld Metal Thickness (2 + 2)mm Min (2 + 2)mm Min

    Pipe Diameter (O.D) Plate 24’’ OD & Above

    Filler Metal (GTAW) With Filler Metal With Filler Metal

    Solid or flux - cored Solid Solid

    Inserts No No

    Position Qualified 3G FLAT & VERTICAL

    Progression Uphill Uphill

    Inert Backing (GTAW) NA NA

    Current Polarity (GTAW) DCSP DCSP


    Results:-
    Visual Examination of Completed Weld: Satisfactory.
    Mechanical Testing: Report # M 3599 – 3605 dated 19.08.2006 – Accepted.
    We certify that the statements in this record are correct & that the test coupons were prepared, welded, and tested in
    accordance with the requirements of Section IX of the ASME Boiler and Pressure Vessel Code
    FOR FERROFAB (QA/QC Engineer) FOR FERROFAB (Technical Manager)

    Name: Mr. V R GOMES Name: K N Murthy


    Date: 20.08.2006 Date: 20.08.2006

    You might also like