0% found this document useful (0 votes)
19 views

Basic Electronics Solved Problemssem

This document contains questions about basic electronics concepts including rectifier circuits, transistors, and their characteristics. It includes focused short questions asking to calculate voltages, currents, and output waveforms for half wave and full wave rectifiers, and determine currents and voltages in transistor circuits. Long questions ask to analyze circuits in more depth, including calculating efficiency and other parameters for rectifiers, and determining currents and voltages for common base and common emitter transistor configurations. Circuit diagrams are provided for analysis.

Uploaded by

pratiksharma2828
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
19 views

Basic Electronics Solved Problemssem

This document contains questions about basic electronics concepts including rectifier circuits, transistors, and their characteristics. It includes focused short questions asking to calculate voltages, currents, and output waveforms for half wave and full wave rectifiers, and determine currents and voltages in transistor circuits. Long questions ask to analyze circuits in more depth, including calculating efficiency and other parameters for rectifiers, and determining currents and voltages for common base and common emitter transistor configurations. Circuit diagrams are provided for analysis.

Uploaded by

pratiksharma2828
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 14

BASIC ELECTRONICS

Module-1
FOCUSED SHORT QUESTION
1. Determine V0 & ID

2. Calculate V0 and draw the output wave form.


3. Determine V0 & ID in both the circuit given below.

4. Calculate V0 and draw the output wave form of clamper circuit


5. Calculate efficiency ,ripple factor of full wave rectifier?
Derive from note.
6. Calculate V0 and draw the output wave form.

Input is +20 to -20 sinusoidal signal. Diode is si type. V==5 volt.


7. Calculate V0 &ID

.
8. Calculate V0 and draw the output wave form.

9) Calculate V01 &V02, ID

(a) (b)

B)

10) . Calculate V0 and draw the output wave form


LONG QUESTION
1. a) AC voltage of 230V is applied to a half wave rectifier circuit through a transformer
to turn ratio 10:1.The load resistance value is 1kΩ and diode internal resistance value
is 20 Ω.Determine Vm , Im, Iavg, Irms.

b) Calculate efficiency, ripple factor, form factor of the above question

2. a )A full wave rectifier having ac voltage of 220 V rms at supply. load resistance is 1
kΩ.if the diode resistance is neglected then calculate Vm , Im, Idc, Iac, input power, output
power
b)Calculate efficiency, ripple factor of the above question.

3. a ) Calculate V0 and draw the output wave form where V=5V, input signal +15
to -15. Diode is ideal diode.

b) Calculate V0 and draw the output wave form. Diode is ideal diode.
4)a) Calculate V0 and draw the output wave form . Diode is si diode.

b) Calculate V0 and draw the output wave form . Diode is si diode.


5)
A diode has forward resistance 20Ω is used in a halfwave rectifier. The supply voltage is
110v(RMS) & load resistance is 1kΩ. Calculate maximum current , Iavg ,Irms, DC output power
,AC input power .

MODULE-2
FOCUSED QUESTION
1. Write about the characteristics of CE transistor with proper diagram.
Follow CLASS COPY.
2. Write the three current equation of BJT. prove the relation between α,β,γ .
3. Follow CLASS COPY
4. calculate IB,IC,IE,VCE,VC

4 . With neat sketch, explain the principle of working of bridge rectifier.


5. Determine IB, IC, VC , VB for the network. Given β=90.
6. Determine RC RE RB, VCE. VB. Given β=80

7)

Find out IB, IC, VCE , VB, VC

8)
calculateRC, RE,RB,VCE,VB.Given β=80

9)

Determine IB, IC, VCE , VB, VCfor the network.

LONG QUESTION
1. a ) Determine IB, IC, VC , VB,VCE for the network. Given β=120.
b )Draw and Explain the characteristics of Common Base BJT.

2. a ) Determine IB, IC, VC , VB,VCE for the network. Given β=180


b ) Draw and Explain the characteristics of Common Emitter BJT.
3.

Determine IC , VB,VCE ,VCC,VE, R1 for the network. Given β=120


b)

Determine IE, VBC , VB,VCE for the network. Given β=180

4) a)

Calculate VE,IB, IC,VC,VCE,IE


b) Calculate VB,IB, IC,VC,VCE,IE.

You might also like