€MIT TEST AND CALIBRATION CENTRE (NABL ACCREDITED & BIS RECOGNISED LABORATORY ) 1.4945 T3288 19/168, Sarai Rohilla, Old Rohtak Road, Near Usha Mata Mandir, New Delhi-110035, M.: +91-9560959122 Phone : 011-23643095, 011-23643992, +91-9811196977 [email protected] Website : www.atncc.in TEST REPORT atec REPORT No. : ULR-TC558419000000106F Issue Date: 07.02.2019 Issue To: Gupta Power Infrastructure Ltd. Job Order No. : 19011508 Plot No-. F/9, IID Centre, Test to be Conducted: IS 1554(Pt-1)1988 Mukunda Prasad, Date of Test: 16.01.2019 to 05.02.2019 Khordha , Odisha. Date of Sample Received: 15.01.2019 Party Ref No.Dated: 10.01.2019 Quantity of Sample : 80 Meters + 5 Meters (Approx.) ‘Sample Description : 1C x 95 Sq. mm, stranded compacted circular aluminium conductor, Class 2, PVC (Type A) insulated, FR-LSH PVC (Type ST1) sheathed unarmored cable, 1100 Volts grade, Category C2, Cable Code AYY 5 Meters Aluminium wire Dia. 2.55 mm for Tensile Strength and Wrapping Test before Stranding EMBOSSING:"GPIL-RHINO' ELECTRIC,1100 V 16x95 Samm AYY, FR-LSH IS 1554 (Pt-1) [ISI] CM/L-9710480 2018. [SUNo. |Test Conducted 2 |Specification as per Gross Referred To & | E Is 1554:1988(Part-1) With Specified value Test Results| Tost Method of IS: | § lAmendment No. 1,2,3,4 & 5 10810 3 1 |No. of cores 7 7 = 2 [Core identification Red, Black, Yellow, Blue ze cl. 40.1 (a) &.Natural Negeaaata | v * Nature ane saps of Candas Solid/Stranded Circular! 4.62863 ofS] ‘Compac lar/Shaped 8130:2013 ie ster a 4 [Flexibility Ta) ofS cre1 tia tl re as02013 | Yee No. of wires i =15(Min) Sry 8345 Tale 20113] og © _ [Test on Conductor = %1 Annealing Test for copper.% wire diameter Over 1.38 mm Tha e Sen (before stranding) ‘elongation 22.5% (Min.) NA. omits (Pr 1)1884 Jol. 15.1 (a) (i) z @2_ [Tensile Strength for Aluminium H2 Grade Iconductor (Before Stranding) HexGrede:Abovs100 ane cl. 15.1 (a) (i) anekinelacing. 150. CL 7.2.4 of IS 8130: 5, z 136.4 2013, (Pt-2)1984 | yes H4 Grade Above 150 Nimm’ 3 [Wrapping Test for Aluminium eee conductor (Before Stranding) The wire should not break | Satifactory| 01> asx sien, | Yes cu 15.4 (a) Gi) : 64 Conductor resistance at 20°C C.7.3,7318 ICI. 15.1 (a) (iv) 0.320 ohm/Km ( Max.) 0.314 Table-2 of IS yes Red Core 8130:2013, (Pt- 5)1984 Test for insulation & sheath oon] 7.1 [Thickness of Insulation ICL. 9.2 & 9.3,18.1(c) and Table 2 NORTESII re MPR TAI sso MN ee a Red Core 1.60) 1.34 1681.46 yes Cara SADHANA JADO!of6 MANOHAR SINGH JADON (Quality Manager} (C.E.0)aicc 7 AMIT TEST AND CALIBRATION CENTRE (NABL ACCREDITED & BIS RECOGNISED LABORATORY ) 4945 1208 19/168, Sarai Rohila, Old Rohtak Road, Near Usha Mata Mandir, New Delhi-110035, M.: +91-9560959122 Phone : 011-23643905, 011-29643092, +91-9811196977 [email protected] Website : www.atnco.in REPORT No. : ULR-TC558419000000106F TEST REPORT lunarmouted single-core cables. (i) Over the inner sheath in case lof unarmoured twin, three-and multi-core cables; and /SI.No. |Test Conducted 2 Specification as per Cross Referred To & E IS 1554:1988(Part-1) With Specified value Test Results| Test Method of IS: € Amendment No. 1,2,3,4 & 5 10810 5 8 eee etree manent It fits closely on the conductor and it shall be possible to remove it yes without damage to the conductor 8 [Laying up of cores in twin,three- and multi-core] NA. Cl. 14.1 cables, the core shall be laid up together with a suitable lay; the outermost layer shall have right- e |hand lay and the successive layers| ‘shall be laid with opposite lay; where necessary, the interstices |shaill be filled with non-hygroscopic| material Plan for lay-up of cores Cl. 11.2 & Table 3 9 | Thickness of yes Cl, 14.4 and Table 7. a (Pt 6/1984 yes. 9,7 |Applcation of The yes Cl. 14.1 (a,b,c) i) Over the insulati yes NA. i) Over the armouring in case of | wa, armoured cables. The outer sheath shallbeso | gat, yes lapplied that If fits closely over tia faciey, insulation, inner sheath’ larmouring. It shall be possible to remove it without damage to the insulatiorvinner sheath 2_|Colour of outer sheath The colour of outer sheath shall be cl 143 black, unless any other colour is agreed to between the purchaser | 4° ns and the supplier 93 [Overall Dia. 19.0 + 2mm (Approx.) 19.48 (Pt-6)/1984 yes 10 [Physical tests for insulation (Type A) Cl, 4 1(i)a & Table of 70.1 |Tensile strength 12.5 Nimm? (Min) 1S 8831-1984, (Pt- ct 45.1001) 7/1984 Red Core 14.43 yes met c j ra Issued BY ‘Authorized Si Sable 2086 MANOHAR SINGH JADON ( ity Manager) (CEO)atce AMIT TEST AND CALIBRATION CENTRE (NABL ACCREDITED & BIS RECOGNISED LABORATORY ) ible Yass 19/168, Sarai Rohila, Old Rohtak Road, Near Usha Mata Mandi, New Delhi-110035, W.: +91-9560059122 Phone : 011-23643995, 011-29643992, +91-9811196977 [email protected] Website : www.atncc.in REPORT No. : ULR-TC558419000000106F TEST REPORT (CE) [SINo. ]Test Conducted = [Specification as per Gross Referred To & | € IS 1554:1988(Part-1) With Specified value Test Results| Tost Mothod of IS : 5 lAmendment No. 1,2,3,4 & 5 10810 3 ral 6 102 |Elongation at break Ici 15.14(1) C1. 4.1(ii)b & Table-t off marcare 160% (Min.) IS 5831-1984, (Pt- 260 7/1984 yes 703 [Ageing in Air Oven C1 15.14(2) 703.1 |Tensile strength 12.5 Nimm? (Min.) Red Core 43.73 _| Cl. 4.1(jv) & Table-1 of | yes 10.32 [Variation Is 6831-1984, Red Core S20HMex) 44.85 (Pt- 111984 70.3; [Elongation at break ieoulia) ps Red Core 245 yes 7034 |Variation Rea cae £20% (Max) aay ia 704 |Shrinkage test _ . al neat (Vii) & Table-T of Ch 15.1013) = A 4 131-1984, (PI- aad 4% (Max.) 4.00 42)1984 yes 705 aaa a GL a7(v)& Table 1 of L peter: 90 t 1:1984, (Pt- Red Core I 151984 yes 706 |Loss of Mass os me I. 41(v)& Table 1 of cl 15.1 (4) (5) 2mgicm? (Max.) 1s 5831:1984, (Pt- Red Core a 0.677 10)1984 yes 707 |Heat Shock test cl. 15.1(4) (6) No signs of cracks No signs of | Cl. 4.1(vil)& Table 1 of Visual Examination or scales cracks | 1S 5831:1984, (Pt- Red Core sayios | yes 708 [Thermal Stabiti C4. 10K) Table 7 off cl 15.1(0) (7) 80 Minutes (Min.) Is 5831:1984, (PI- Red Core, 2110 60)1988, yes 71 |Physical tests for Outer sheath FR-LSH (Type ST1) ci. 15.1(a) Tit [Tensile strength CL 4.1()a & Table 2 of ICI. 15.1(d) (1) 12.5 Nimm? (Min.) 14.32 1S 5831:1984, (Pt- | yes a 71984 112 [Elongation at break CLA T(b & Table 2 of cl. 15.1(d) (1) 180% (Min.) 240 1s 5831:1984, (Pt | yes 71984 113 [After Ageing in Air Oven cl. 15.1¢d) (2) 11.3.4 [Tensile strength 125 Nimm? (Min) 13.62__| Cl. 4.1(i) & Table 2 of [yes 711.32 [Variation 20% (Max.) 489 ts 5831:1984, (Pt [yes 11.3.3 [Elongation at break 150% (Min.) = 228 11)1984 yes 11.3.4 [Variation = 20% (Max) $5.00 yes Méth Ars Issued By ‘Authorized Signatory SADHANA JADON MANOHAR SINGH JADON rua Boteatcs REPORT No. : ULR-TC558419000000106F AMIT TEST €@ND CALIBRATION CENTRE (NABL ACCREDITED & BIS RECOGNISED LABORATORY ) 18% Yazns_ 19/168, Sarai Roila, Od Rohtak Road, Near Usha Mata Mandir, New Deli-110035, M.: +91.9560959122 Phone : 011-23643995, 011-23643992, +91-9811196977 [email protected] Website : www.atnce.in TEST REPORT [SINo. |Test Conducted = Specification as per Cross Referred Toa | = Is 1554:1988(Part-1) with Specified value Test Results| Test Method ofS: | § lAmendment No. 1,2,3,4 & § 10810 = 8 714 [Shrinkage test OAT) & Table DoF ci. 15.103) 4% (Max.) 1.50 1S 6831:1984, (Pt. | yes 42)1984 115 [Hot Deformation Test LAT) & Table DoF cl. 15.1(4) (4) 50% (Max) 2492 | 18 6831-1984, (Pt- | yes 15)1984 T16 |Loss of Mase CLA Til) & Table 2 oF ICI.45.1 (d) (5) 2 mg/cm? (Max.) 0.738 1S 5831:1984,(PI- | yes 40/1984 TET [Heat Shock test CLA) & Table 2 oF Ici. 15.1(4) (6) Nessa: corerachs No signs of | “1s 5831:1984,Pt- | yes Visual Examination 14)1984 Thermal Stability Cl 4 1(«) & Table 2 of tte [ot 18.104) 7) 40Minutes (Min. >80 18 6831:1984(Pt- | yes 60)1988 insulation Re = 12 Nor 15.100) = GL4 (ja & Table-t of ay “1s'6831-1984, (Pt- : 43)1984 yes Tait = GL. 4 1()b & Table-t of 4x 100hm. 1S 5831-1984, (Pt- ee a ne ot aga a ae insulation Resistance constant Cis. 4.1(i)a & Tablet 172 {or 15.16) 36.7 MOkm (Min.) ot 7224 | ata7c : : Is 5891-1984, (Pt- Red Core 1155.8 43)1984 yes | 12.2.2 [Maximum rated temp. at 70°C Cl. 4.1(i)b & Table-1 of 1984, (Pt- Red Core 0.087 MAkm (Min.) spas (=O 13 [High Voltage test (Room Temp.) cl. 15.1(g) & 16.2 The cable shail withstand | ac Voltage an ac. voltage of 3 KV peneaed Red Core (rms) or a de voltage of 7.2 kV. = The duration of test shall be 5 . pe S| Breakdown yes minutes for each connection | Breakdown Mek Ora Issued By ‘Authorized Signatory SADHANA JADON goto MANOHAR SINGH JADON (Quality: Manager. (C.E.0)atec 7 €MIT TEST AND CALIBRATION CENTRE (NABL ACCREDITED & BIS RECOGNISED LABORATORY ) sts Yass 19/168, Sarai Roila, Od Rohtak Road, Near Usha Mata Mandi, New Delh-110035, M.: +91-9560959122 Phone : 011-23643095, 011-23643992, +91-9811196977 [email protected] Website : www.atncc.in REPORT No. : ULR-TC558419000000106F TEST REPORT [SINo, |Test Conducted = \Specification as per Cross Roferred Tos | = Is 1584:1988(Part-1) With Specified value Test Results| Test Method of 8: | § JAmendment No. 1,2,3,4 & § 10810 5 8 fa cere deokiventer The core shall be immersed in a | migsery a water bath at 60+3°C after 24 hour waa ee a vottage of 3KV (rms) shall be alee applied between conductor and (Pt 45)1984 water. This voltage shall be raised Red Core to 6kV (rms) within 10 sec and We — held constant at hs values eS | preskdown le = Observed 742 [DC test "The core should withstand ci 163.2 de.voltage of 1.2 KV in the same Red Core water bath as ac. test at 60#3°C | No Iressa for 240 hours continuously without | Breakdown yes sbreakdown Observed 15 [Flammability Test rasa cl 16.4815. TE1 [Period of Buring a te Fira : : geass) 1064: yes. TE2 [Unaffected ( q from the lo ian clamp 18 [Optional test 761 [Cold Impact test for insulation ci.15.4(b) Visual examination Red Core OL 4.1 (x) Tabie-t of No signs of cracks or scale | No-sians of | 1s 5831-1984, (Pt-21) | yes 1984 T62_ [Cold Impact test for sheath 7 (il Table ofS: c.15.4(b) No signs of cracks orscale | NOS'808 °F) “sa31-t984, (Pt-21) | yes Visual examination 1984 18 [Additional Test for Cables with Improved Fire Performance Category(G2) cl 15.1.1 & Appendix A FBT [Oxygen index Test, (PEGS) TOORTASTM Eere 29% 334 Mee yes 782 |Flame Retardance test on Single cables After the test, there should benno | 845 yes ci. 166 Visible damages on the test (The external diameter of the test | specimen within 300 mm from its Are sere a4 specimen shall not exceed 35, upper end mm) Diameter of Cable, mm 49.48 yes Mek ee issued By Authorized Signatory MANOHAR SINGH JADO! SADHANA JADON og yg (CE.0.) (Quality Manager)aMIT TEST AND CALIBRATION CENTRE NABL ACCREDITED & BIS RECOGNISED LABORATORY ) 19/168, Sarai Rohilla, Old Rohtak Road, Near Usha Mata Mandir, New Delhi-110036, M.: +91-9560959122 Phone : 011-23643995, 011-23643992, +91-9811196977 [email protected] Website : www.atnco.in TEST REPORT visas T3288 REPORT No. : ULR-TC558419000000106F SINo. [Test Conducted = Specification Cross Referred To.& | = IS 1554:1998(Pa Specified value Test Results| Test Method of IS: | § lAmendment No. 1,2,3,4 & 5 10810 5 TES [Flame Retardance teston ‘After Burning has ceased, the lbunched cables cables should be wiped clean and ci. 167 charted or affected portion should| 4.79 _‘|(Pt-62)-199lEC-332.9 not have reached a height S Category B oo Jexceeding 2.5 m above the bottom edge of the burner Ee rentice open oc fas ‘The level of HCL evovied shall not (P59) )1988IEC-754-1 yout y went. % Muara Grea 16.34 yes 185 | Temperature Index at 21% loxygen,°c 250 (Min.) Bean | eee en ci 16.10 786 [Density of more oi. 16.14 60% (Max) 46.3 ASTM D 2643, REMARKS: The Samj ey in == Fi with =. No. EPO! (1). This Test Report refers only to the particular sample(s)'submitted for testing, (2) This Test Report shall not be reproduced, except in full, unless written permission for the publication of an approved abstract has been obtained from the CEO, Amit Test and Calibration Centre, New Delhi. (3) Test Report shall not be utilized for any legal purpose and will Not be produced in the court of law & no responsibility would be attached Amit Test and Calibration Centre. (4) The test results reported in this certificate are valid at the time of and under the stated conditions of measurements. 6of6 Gra het Authorized SON INGH JADON SADHANA J. MANOHAR SINGH JADON Ra