SURESH GYAN VIHAR UNIVERSITY, JAGATPURA JAIPUR.

Department Of Mechanical Engineering

B.Tech Syllabus 3rd Sem Session 2022-2026 (Onwards)
to be implemented session 2023 – 2024
Contact Weightage
Course Hours/Week Exam (%)
S.NO Course Name Credit
Code Hours
L T P CE ESE
UNIVERSITY CORE
Economics and Social
1 HS 203 2 2 0 0 3 40 60
Sciences
2 EM 201 Employability Skill-II 1 0 2 0 3 60 40
Proficiency and Co-
3 PC 201 2 0 0 0 0 100
Curricular Activities – III
PROGRAME CORE
4 ME 201 Mechanics of Solids 4 3 1 0 3 40 60
5 ME 251 Mechanics of Solid Lab 2 0 0 2 3 60 40
Engineering
6 ME 203 4 3 1 0 3 40 60
Thermodynamics
Industry Oriented Thermal
7 ME 253 2 0 0 2 3 60 40
Engineering Laboratory
8 ME 257 Material Science Lab 1 0 0 2 3 60 40
9 ME 207 Applied Material Science 3 3 0 0 3 40 60

10 MA 205 Advance Maths 3 3 0 0 3 40 60

11 ME 211 Manufacturing Technology 2 2 0 0 3 40 60

Manufacturing Technology
12 ME 259 1 0 0 2 3 60 40
Lab
PROGRAME ELECTIVE
(Select one Theory & One
Lab )
ME 216 Industrial Engineering 2 2 0 0 3 40 60
13
ME 262 Industrial Engineering Lab 1 0 0 2 3 60 40
14
Computer Aided Machine
ME 265 Drawing Lab (AutoCAD 1 0 0 2 3 60 40
15
Software)

Python Programming
ME 215 2 2 0 0 3 40 60
16 Language

1 0 0 2 3 60 40
17 ME 267 Python Lab
UNIVERSITY
ELECTIVE
18 Student can opt from “List of University Elective”
TOTAL 30 18 4 10
Course Title: Economics and Social Sciences Course Code : HS 203
Semester : III Core / Elective :University
Core
Teaching Scheme in Hrs (L:T:P) : 3:0:0 Credits : 3 Credits
Type of course : Lecture + Assignments Total Contact Hours : 36
Continuous Internal Evaluation : 40 Marks SEE : 60 Marks
Programmes: B.TECH (MECHANICAL ENGINEERING)
Course Objective
• To understand the significance of the economic aspects of engineering and to become
proficient in the evaluation of engineering proposals in terms of worth and cost
• To help students to grasp various economics concepts and theories towards making economic
decision.
Units Course Contents Hours
I Definition of Economics - various definitions, Nature of Economic problem,
Production possibility curve, Economic laws and their nature. Relation between
Science, Engineering, Technology and Economics. 7
Concepts and measurement of utility, Law of Diminishing Marginal Utility, Law
of equi-marginal utility - its practical application and importance
II Meaning of Demand, Individual and Market demand schedule, Law of demand,
shape of demand curve, Elasticity of demand, measurement of elasticity of demand,
factors effecting elasticity of demand, practical
7
importance & applications of the concept of elasticity of demand.
Meaning of production and factors of production; Law of variable proportions,
Returns to scale, Internal and External economics and diseconomies of scale.
III Various concepts of cost - Fixed cost, variable cost, average cost, marginal cost,
money cost, real cost opportunity cost. Shape of average cost, marginal cost, total
cost etc. in short run and long run. 7
Meaning of Market, Types of Market - Perfect Competition, Monopoly, Oligoply,
Monoplistic Competition (Main features of these markets)
IV Supply and Law of Supply, Role of Demand & Supply in Price Determination
and effect of changes in demand and supply on prices. 7
V Nature and characteristics of Indian economy (brief and elementary introduction),
Privatization - meaning, merits and demerits. Globalization of Indian economy -
7
merits and demerits. Elementary Concepts of VAT, WTO,
GATT & TRIPS agreement
Total 35

Text Books:
1, Vengedasalam, Deviga. Madhavan, Karunagaran, Principles of Economics, Oxford University Press.
2. R. Paneer Seelvan, “ Engineering Economics”, PHI
3. Ahuja,H.L., “Principles of Micro Economics” , S.Chand & Company Ltd
4. Riggs,J.L., Bedworth and Randhwa, “Engineering Economics”, McGraw Hill Education India
5.Paul, R.R., Money, Banking and International Trade, Kalyni Publishers

Ref. Books
1.Park, Chan.S, “Fundamental of Engineering Economics”, Pearson.
2. Engineering Economy by William G.Sullivan, Elin M.Wicks, C. Patric Koelling, Pearson
3. Thuesen, G.J.,Fabrycky,. Engineering Economy, PHI.
4.Jhingan,M.L., “Macro Economic Theory”, Vrinda Publications Ltd
 Course Code: EM-201 Course Name: Employability Skills – II
LTPC: 0201Total Contact Hours: 25
COURSE CONTENTS
S.No. Topic Details Contact
Hrs
1 Communication Role Play, Reading, Formal writing skills Listening, 15
Interaction Process, Interpersonal Relationship
2 Attitude& Motivation, Team Building, Winning Strategy, CAN DO, 5
Manners
3 Preparation, Presentation skills, Preparation Skills, 4
presentation
4 Industry Concept & Importance of SIP, Industrial Mentoring & 1
Networking

Course Title: ADVANCED MATHS Course Code : MA 205

Semester : III Core / Elective :University
Core
Teaching Scheme in Hrs (L:T:P) : 3:0:0 Credits : 3 Credits
Type of course : Lecture + Assignments Total Contact Hours : 36
Continuous Internal Evaluation : 40 Marks SEE : 60 Marks
Programmes: B.TECH (MECHANICAL ENGINEERING)
Pre-requisites:
Basic maths
Course Objectives:
To know advancement of maths in engineering field
Course Content:

Topic and Contents Hours Marks

8 20
UNIT-1
Boundary value problems: Method of separation of variables - in the
solution of wave equation in one dimension, Laplace’s equation in two
dimensions, Diffusion equation in one dimension.

UNITS-2 07 20
Transform calculus : Laplace transform with its simple properties,
applications to the solutions of ordinary and partial differential equations
having constant co-efficient with special reference to wave and
diffusion equation
UNITS-3 07 20
FOURIER TRANSFORM - Complex form of Fourier Transform and its
inverse, Fourier sine and cosine transform and their inversion.
Applications of Fourier Transform to solution of partial differential
equations having constant coefficient with special reference to heat
equation and wave equation.
UNIT-4 7 20
Complex variable: Taylor’s series, Laurent’s series, poles, residues.
Evaluations of simple definite real integrals using the theorem of
residues. Simple contour integration.
UNIT 5 07 20
 Numerical Methods: Finite differences and interpolation Numerical
Differentiation and Integration. Solution of Algebraic and transcendental
equations by graphical method, trisection method, regula – falsi
method and Newton raphson method.
Z-Transform:
Definition, properties and formulae, Convolution theorem,
inverse Ztransform, application of Z-transform to difference
equation.
TOTAL 36 100

Course outcomes:
On successful completion of the course, the student will be able to:
1. Solve Advanced Mathematics problems in engineering field.

Course Title: MECHANICS OF SOLID Course Code : ME 201

Semester : IV Core / Elective: PROGRAME CORE
Teaching Scheme in Hrs (L:T:P) : 3:1:0 Credits : 4 Credits
Type of course : Lecture + Assignments Total Contact Hours : 36
Continuous Internal Evaluation : 40 Marks SEE : 60 Marks
Programmes: B.Tech Mechanical Engineering
Pre-requisites:
Basic mathematics and Engineering Mechanics
Course Objectives:
• To define the concept of load, stress, strain, stress vs strain diagram and elastic
constant relationship.
• To Solve engineering problems through the relationship between stress and strain.
• To determine shear force and bending moment diagrams for variously loading
Conditions
• Learn to solve problems for calculation of torsion and Twisting moment in solid and
hollow circular shafts.
Course Content:
Topic and Contents Hours Marks
UNIT-1: 8 20
Introduction to Stress and strain: Definition of Stress, Normal Stress in
axially loaded Bar, Stress on inclined sections in axially loaded bar, Shear 8
Stress, Analysis of normal and shear stress, Deterministic design of
members, probabilistic basis for structural design. Tension test and normal
Strain, Stress strain relation and Hooke's law. Poisson's ratio, Thermal
strain and deformation.
UNIT-2 7 20
Stress as a tensor: stress at point, Cauchy stress tensor, equilibrium
7
equations, analysis of deformation and definition of strain components
Some properties of Stress and Strain Tensor: Principal stresses and
strains, stress and strain invariants, Mohr’s circle representation for plane
stress and plane strain, thermal stresses and strains, volumetric stress and
strain.
UNIT-3 7 20
 Application of Mechanics of Material in Different Problems:
Shear Force and Bending Moment diagrams, Axially loaded members,
Torsion of circular shafts, Stresses due to bending: pure bending theory,
combined stresses. Deflections due to bending: moment-curvature
relation, load-defection differential equation, area moment method, and 7
superposition theorem, Stresses and deflections due to transverse shears,
Springs: Helical and Leaf springs

UNIT-4 7 20
Constitutive relations: An short introduction to material symmetry
transformations, Isotropic material, true and engineering stress-strain
curves, Material properties for isotropic materials and their relations.
7
Theories of failures for isotropic materials,Buckling of columns; Concept
of creep, fatigue and fracture.

UNIT-5 7 20
Energy Methods: Strain energy due to axial, torsion, bending and
transverse shear. Castigliano's theorem, reciprocity theorem etc.
7
TOTAL 26 100

Refrences:
• S. C. Crandall, N. C. Dahl, and T. J. Lardner, An Introduction to the Mechanics of Solids, 2nd
Ed, McGraw Hill, 1978.
• E. P. Popov, Engineering Mechanics of Solids, Prentice Hall, 1990.
• H. Shames, Introduction to Solid Mechanics, 2nd Ed, Prentice Hall, 1989.
• S. P. Timoshenko, Strength of Materials, Vols. 1 & 2, CBS publ., 1986.
Course outcomes:
On successful completion of the course, the student will be able to:
• Find the basic mechanical properties of material, tension, compression, torsion, bending and
combined stress using the fundamental concepts of stress, strain and elastic behavior of
materials.
• Apply the stress- strain distributions, diagrammatically representation of shear force & bending
moment for different beams under various load conditions by using suitable methods.
• Analyze the slope and deflections for different cross sectional beams and columns, torsion
effect for shaft and springs under different load conditions.
• Solve the engineering problems by applying mechanical engineering concepts and theories.

Course Title: ENGINERING THERMODYNAMICS Course Code : ME 203

Semester : IV Core / Elective: PROGRAME CORE
Teaching Scheme in Hrs (L:T:P) : 3:1:0 Credits : 4 Credits
Type of course : Lecture + Assignments Total Contact Hours : 36
Continuous Internal Evaluation : 40 Marks SEE : 60 Marks
Programmes: B.Tech Mechanical Engineering

Pre-requisites:
Basic of physics, basic of mathematics, first and , Zeroth law of thermodynamics, Carnot engine,
Work
Course Objectives:
To study about thermodynamic System, properties and their types & state, Definition of work process
& cycle internal energy & enthalpy, Specific heats; internal energy, enthalpy, Reversible process; heat
engine, heat pump, refrigerator; Kelvin-Planck & Clausius statements, Concept of entropy; the Need of
entropy definition of entropy; Available energy, Otto, Diesel and Dual cycle, Third Law of
Thermodynamics.

Course Content:

Topic and Contents Hours Marks

UNIT-1: 7 20
Thermodynamic Systems, properties & state, process & cycle Definition
of work and its identification, work done at the moving boundary,
Zeroth law.
Thermodynamic Properties of Fluids: Pure substance, Concept of
Phase, Graphical representation of p-v-T data, Properties of steam.
Steam tables, Mollier chart
UNIT-2: 07 20
First law for control mass & control volume for a cycle as well as for a
change of state, internal energy & enthalpy, Specific heats; internal
energy, enthalpy specific heat of ideal gases.
First law analysis of some elementary processes. Steady and unsteady
flow energy equations.
UNIT-3: 07 20
Second Law of Thermodynamics: Heat engine, Heat pump and
refrigerator, Second law of thermodynamics, Equivalence of the Kelvin-
Plank and Clausius statements. Reversible and Irreversible Processes,
Carnot engine, Efficiency of a Carnot engine, Carnot principle,
thermodynamic temperature scale, Clausius Inequality.
Entropy: Entropy, Calculation of Entropy change, Principle of entropy
increase. Temperature-Entropy diagram, Second law analysis of a
control volume.

UNIT-4 08 20
Available energy, reversible work irreversibility for control mass and
control volume processes; second law efficiency.
Thermodynamic Relations: Thermodynamic variables, Independent and
dependent variables, Maxwell’s thermodynamic relations,
Thermodynamic relations involving entropy, Thermodynamic relations
involving enthalpy and internal energy, Joule-Thomson coefficient,
Clapeyron equation.
UNIT-5 07 20
Power Cycles: Otto cycle, Diesel cycle, Dual cycle, Brayton cycle and
Ericsson cycle.
Vapour power cycle: Rankine cycle, effect of operating conditions on
its efficiency, properties of ideal working fluid in vapour power cycle,
Reheat cycle, regenerative cycle, bleeding extraction cycle, feed water
heating co-generation cycle.
TOTAL 36 100
Reference:
• Sonntag R.E., Claus B. & Van Wylen G., "Fundamentals of Thermodynamics", John Wiley &
Sons, 2000, 6th ed.
• GFC Rogers and Y R Mayhew, Engineering Thermodynamics Work and Heat Transfer 4e,
Pearson 2003
 • J P Howell and P O Bulkins, Fundamentals of Engineering Thermodynamics, McGraw
Hill,1987
• Y A Cengal and M A Boles, Thermodynamics, An Engineering Approach, 4e Tata McGraw
Hill, 2003.
• Michael J. Moran & Howard N. Shapiro, Fundaments of Engineering Thermodynamics, John
Wiley & Sons, 2004, 4th ed

Course outcomes:
On successful completion of the course, the student will be able to:
1. The students will be able to define the terms temperature, entropy and enthalpy.
2. The students will be able to explain the refrigeration and heat pump cycle
3. The students will be able to explain properties of pure substance.
4. The students will be able to understand working of different-different engines.

Course Title: MECHANICS OF SOLID LAB Course Code : ME 251

Semester : III Core / Elective: PROGRAME CORE
Teaching Scheme in Hrs (L:T:P) : 0:0:3 Credits : 2 Credits
Type of course : Lab Experiment Total Contact Hours : 20
Continuous Internal Evaluation : 60 Marks SEE : 40 Marks
Programmes: B.Tech Mechanical Engineering
Pre-requisites:
Engineering Mechanics, Mechanics of solids theory
Course Objectives:
TO PERFORM VARIOUS EXPERIMENTS ON MECHANICS OF SOLIDS
Course Content:

Topic and Contents Hours Marks

LIST OF EXPERIMENTS (ANY 10) 20 100
1. Izod Impact testing.
2. Rockwell Hardness Testing.
3. Spring Testing
4. Column Testing for buckling
Two hours
5. Torsion Testing
for each
6. Tensile Testing
experiment
7. Compression Testing
8. Shear Testing
9. Brinell Hardness Testing
10. Bending Test on UTM.
11. Study of Fatigue Testing Machine.
TOTAL 20 100
Reference:
• S. C. Crandall, N. C. Dahl, and T. J. Lardner, An Introduction to the Mechanics of Solids, 2nd
Ed, McGraw Hill, 1978.
• E. P. Popov, Engineering Mechanics of Solids, Prentice Hall, 1990.
• I. H. Shames, Introduction to Solid Mechanics, 2nd Ed, Prentice Hall, 1989.
• S. P. Timoshenko, Strength of Materials, Vols. 1 & 2, CBS publ., 1986.

Course outcomes:
On successful completion of the course, the student will be able to:
1. Various type of strength calculation
2. Calculation of hardness
3. Calculation of toughness
Course Title: Industry Oriented Thermal Engineering
Course Code : ME 253
Laboratory
Semester : III Core / Elective: PROGRAME CORE
Teaching Scheme in Hrs (L:T:P) : 0:0:3 Credits : 2 Credits
Type of course : Lab Experiment Total Contact Hours : 30
Continuous Internal Evaluation : 60 Marks SEE : 40 Marks
Programmes: B.Tech Mechanical Engineering

Pre-requisites:
ENGINEERING THERMODYNAMICS

Course Objectives:
TO STUDY & PERFORM VARIOUS EXPERIMENTS ON THERMAL EQUIPMENTS

Course Content:

Topic and Contents Hours Marks

LIST OF EXPERIMENTS (ANY 10) 30 100
1. Comparative study of four stroke diesel and petrol engines.
2. Comparative study of two stroke petrol and diesel engines.
3. Studies of fuel supply systems of diesel and petrol engines.
4. Study of cooling, lubrication and ignition system in diesel and petrol
engines. THREE
5. To study various types of Boilers and to study Boiler mounting and hours for
accessories. each
6. To study various types of Dynamometers. experiment
7. To study Multi Stage Air Compressors.
8. To find the BHP, Thermal efficiency of four stroke diesel engine.
9. To prepare a comparison sheet of various automobiles (4 Wheeler and
2 Wheeler).
10. To study BHP, Thermal efficiency of four stroke diesel engine.
TOTAL 30 100
Reference:
1. Sonntag R.E., Claus B. & Van Wylen G., "Fundamentals of Thermodynamics", John Wiley &
Sons, 2000, 6th ed.
2. GFC Rogers and Y R Mayhew, Engineering Thermodynamics Work and Heat Transfer 4e,
Pearson 2003
3. J P Howell and P O Bulkins, Fundamentals of Engineering Thermodynamics, McGraw
Hill,1987
4. Y A Cengal and M A Boles, Thermodynamics, An Engineering Approach, 4e Tata McGraw
Hill, 2003.
5. Michael J. Moran & Howard N. Shapiro, Fundaments of Engineering Thermodynamics, John
Wiley & Sons, 2004, 4th ed

Course outcomes:
On successful completion of the course, the student will be able to:
1. Comparative study of four stroke diesel and petrol engines.
2. Comparative study of two stroke petrol and diesel engines.
3. Studies of fuel supply systems of diesel and petrol engines.
4. Study of cooling, lubrication and ignition system in diesel and petrol engines.
5. To study various types of Boilers and to study Boiler mounting and accessories.
Course Title: MATERIAL SCIENCE LAB Course Code : ME 257
Semester : III Core / Elective: PROGRAME
ELECTIVE
Teaching Scheme in Hrs (L:T:P) : 0:0:2 Credits : 1 Credits
Type of course : Lab Experiment Total Contact Hours : 20
Continuous Internal Evaluation : 60 Marks SEE : 40 Marks
Programmes: B.Tech Mechanical Engineering

Pre-requisites:
Workshop technology, Engineering mechanics, Engineering drawing

Course Objectives:
TO STUDY PROPERTIES OF VARIOUS MATERIALS THEIR STRUCTURE AND
BEHAVIOUR OF PHASE DIAGRAM.

Course Content:

Topic and Contents Hours Marks

LIST OF EXPERIMENTS (ANY 10) 30 100
1. To study the Engineering Materials, significance and classifications.
2. Study of crystals structures, Study of Models BCC, FCC, HCP,
stacking sequence, tetrahedral and Octahedral voids
3. To calculate the effective numbers of atoms, co-ordination no.
packing factors, c/a ratio for BCC, FCC & HCP structures.
4. To prepare metallic samples for metallographic examination and to
study the principle and construction of the Metallurgical Microscope.
5. Effect of carbon percentage on hardness of steel
6. Study of Phase Diagrams: concept of phase rule: Fe-C & Cu-Zn.
7. Study of Creep, Study of anistropy: Glass 'Fibre and Carbon' Fibre
Composites.
Two hours
9. Study of various types of fractures, Brittle fracture/ductile.
for each
10. Study of Iron-Carbon Equilibrium Diagram and sketch the various
experiment
structures present at room temperature.
11. To determine Rockwell/ Vickers/Brinell hardness of a given
material
12. To perform Impact test on a given material and to determine
its resilience.
13. Heat treatment experiments such as annealing, normalizing,
quenching, case hardening and comparison of hardness before and
after.
14. To perform Tensile/Compressive/Shear/torsion test on a given
material and to determine its various mechanical properties under
tensile/compression/Shear/torsional loading
TOTAL 30 100
Reference:
1. William D. Callister, Material science and Engineering and Introduction, Wiley, 2006.
2.V. Raghavan, Materials Science and Engineering, Fifth Edition, Prentice Hall Of India,
2008.
3.G. E. Dieter, Mechanical Metallurgy, McGraw Hill, 1988.
4.W. F. Smith, Materials Science and Engineering (SIE), Tata-McGraw Hill, 2008.
5.AVNER, Introduction to Physical Metallurgy, Tata-McGraw Hill, 2008.
 Course outcomes:
On successful completion of the course, the student will be able to:
1. To differentiate between various materials
2. To understand structure of various material.
3. To Study of Iron-Carbon Equilibrium Diagram .

Course Title: APPLIED MATERIAL SCIENCE Course Code : ME 207

Semester : III Core / Elective: PROGRAME
ELECTIVE
Teaching Scheme in Hrs (L:T:P) : 3:0:0 Credits : 3 Credits
Type of course : Lecture + Assignments Total Contact Hours : 36
Continuous Internal Evaluation : 40 Marks SEE : 60 Marks
Programmes: B.Tech Mechanical Engineering

Pre-requisites:
Element of Mechanical Engineering, Material Science

Course Objectives:
TO STUDY ABOUT BASICS OF MATERIAL, PROPERTIES AND THEIR STUCTURE.

Course Content:

Topic and Contents Hours Marks

UNIT-1: 7 20
Structure of metal: Crystal structure, miller indices, lattices, imperfections,
elementarytreatment of point and line defects and their relation to mechanical
properties.
Deformation: Slip, twinning, effect of cold and hot working on mechanical
properties, principles of recovery, re-crystallization and gain growth.

UNIT-2: 07 20
Creep: Basic consideration in the selection of material for high and low
temperature service, creep curve, effect of material variables on creep properties,
brittle failure at low temperature.
Solidification: Phases in metal system, lever rule, solidification of metal and
alloys, solid solution, eutectic, eutectoid and inter-metallic compounds, Iron
carbon equilibrium diagram, TTT-diagram
UNIT-3: 07 20
Heat Treatment: Principles and purpose of heat treatment of plain carbon steels,
annealing, normalizing, hardening, tempering, isothermal treatment, case
hardening – carburizing, nitriding etc, precipitating hardening of aluminum alloys.
Corrosion: Types of corrosion, Galvanic cell, rusting of Iron, Methods of
protection from corrosion.
UNIT-4:
07 20
Engineering Materials: Plain Carbon steels, Effects of alloying elements ,
properties, uses, springs, and wear resisting steels, IS standards codes for steels.
Low alloy steels. Stainless, Magnetic materials for high and low temperature
service. Brasses and bronzes; Aluminum base alloys. Bearing Materials,.

UNIT-5: 08 20
Composite Material: General characteristics, Applications, Introduction to Fibers
–glass, carbon, Kevlar 49 fibers. Matrix –Polymeric, Metallic, Ceramic Matrix,
Coupling agents and fillers.
Nano Material:
Mechanical Properties and Testing: Types of fracture, testing of materials
under tension, compression and shear loads – hardness tests (Brinell, and
Rockwell) Impact test Izod and charpy, fatigue and creep test.
Microstructure Testing Machines: Scanning Electron Microscopy, Energy
Dispersive X- Ray, X-Ray diffraction analysis of crystal, X-Ray Photoelectron
Spectroscopy (XPS)

TOTAL 36 100
Reference:
1. William D. Callister, Material science and Engineering and Introduction, Wiley, 2006.
2. V. Raghavan, Materials Science and Engineering, Fifth Edition, Prentice Hall Of India,
2008.
3. G. E. Dieter, Mechanical Metallurgy, McGraw Hill, 1988.
4. W. F. Smith, Materials Science and Engineering (SIE), Tata-McGraw Hill, 2008.
5. AVNER, Introduction to Physical Metallurgy, Tata-McGraw Hill, 2008.

Course outcomes:
On successful completion of the course, the student will be able to:
1. Crystal structure, miller indices, lattices, imperfections, elementary treatment of point and line
defects and their relation to mechanical properties.
2. Principles and purpose of heat treatment of plain carbon steels, annealing, normalizing,
hardening, tempering, isothermal treatment, case hardening – carburizing, nitriding etc,
precipitating hardening of aluminum alloys.
3. Types of corrosion, Galvanic cell, rusting of Iron, Methods of protection from corrosion.

Course Title: MANUFACTURING TECHNOLOGY Course Code : ME 211

Semester : III Core / Elective : Program
Elective
Teaching Scheme in Hrs (L:T:P) : 3:0:0 Credits : 3 Credits
Type of course : Lecture + Assignments Total Contact Hours : 36
Continuous Internal Evaluation : 40 Marks SEE : 60 Marks
Programmes: B.Tech (Mechanical Engineering)

Pre-requisites:
Workshop technology, physics in Secondary Education, engineering drawing, engineering
mechanics.

Course Objectives:

1. Apply the concept of different types of casting in manufacturing of product.

2. Apply the concept of different types of welding in manufacturing of product.
3. Apply the concept of smithy and forging in manufacturing of product.
 4. Apply the concept of sheet metal work in manufacturing of product.
5. Apply the concept of bench work and fitting in manufacturing of product.

Course Content:

Topic and Contents Hours Marks

MANUFACTURING TECHNOLOGY
UNIT I: METAL CASTING PROCESSES 08 20

Sand Casting Sand Mould – Type of patterns - Pattern

Materials – Pattern allowances –Moulding sand Properties and
testing – Cores –Types and applications – Moulding machines–
Types and applications: Melting furnaces : Blast and Cupola
Furnaces: Principle of special casting processes : Shell -
investment – Ceramic mould – Pressure die casting - Centrifugal
Casting - CO2 process – Stir casting; Defects in Sand casting

UNIT II: METAL JOINING PROCESSES 07 20

Operating principle. basic equipment. merits and applications of

: Fusion welding processes : Gas welding -Types – Flame
characteristics; Manual metal arc welding – Gas Tungsten arc
welding - Gas metal arc welding –Submerged arc welding – Electro
slag welding: Operating principle and applications of : Resistance
welding -Plasma arc welding – Thermit welding – Electron beam
welding – Friction welding and Friction Stir Welding: Brazing and
soldering: Weld defects: types.causes and cure.

UNIT III: METAL FORMING PROCESSES 07 20

Hot working and cold working of metals – Forging processes –

Open, impression and closed die forging –forging operations.
Rolling of metals– Types of Rolling – Flat strip rolling – shape
rolling operations – Defects in rolled parts. Principle of rod and wire
drawing – Tube drawing – Principles of Extrusion – Types – Hot
and Cold extrusion.

UNIT IV: SHEET METAL PROCESSES 07 20

Sheet metal characteristics – shearing. bending and drawing

operations – Stretch forming operations –Formability of sheet
metal – Test methods –special forming processes-Working
principle and applications –Hydro forming – Rubber pad
forming – Metal spinning– Introduction of Explosive forming.
magnetic pulse forming. peen forming. Super plastic forming – Micro
forming
 UNIT IV: POWDER METALLURGY 07 20

Properties of Powder processed materials, Powder manufacturing,

mechanical pulverization, sintering, Electrolytic
Process, chemical reduction, atomization, properties of metal powders,
compacting of powders sintering, advantages and applications of
Powder metallurgy.
Rapid Prototyping Operations: Introduction, subtractive processes,
additive processes, Virtual Prototyping and applications
TOTAL 36 100
Reference:
1 James S Campbell, Principles of Manufacturing Materials and Processes, Tata McGraw Hill, 1995.
2 F.C. Flemmings, Solidification processing, Tata McGraw Hill, 1982
3 M J Rao, Manufacturing Technology: Foundry, Forming and Welding, Tata McGraw Hill, 1987.
4 G E Linnert, Welding Metallurgy, AWS, 1994.
5 P C Pandey and C K Singh, Production Engineering Sciences, Standard Publishers Ltd. 1980.

Course outcomes:
On successful completion of the course, the student will be able to:
1. Apply the concept of different types of casting in manufacturing of product.
2. Apply the concept of different types of welding in manufacturing of product.
3. Apply the concept of smithy and forging in manufacturing of product.
4. Apply the concept of sheet metal work in manufacturing of product.
5. Apply the concept of bench work and fitting in manufacturing of product.

Course Title: MANUFACTURING TECHNOLOGY LAB Course Code : ME 259

Semester : III Core / Elective: PROGRAME
ELECTIVE
Teaching Scheme in Hrs (L:T:P) : 0:0:2 Credits : 1 Credits
Type of course : Lab Experiment Total Contact Hours : 20
Continuous Internal Evaluation : 60 Marks SEE : 40 Marks
Programmes: B.Tech Mechanical Engineering

Pre-requisites:
Mechanical Workshop and Various shops used in first year.

Course Objectives:
TO STUDY & PERFORM VARIOUS EXPERIMENTS BY USING VARIOUS MACHINES
AND TOOL.

Course Content:

Topic and Contents Hours Marks

LIST OF EXPERIMENTS (ANY 10) 20 100
1. To study of lathe machine, lathe tools cutting speed, feed and depth of cut.
2. To perform step turning, knurling and chamfering on lathe machine as per
Two hours for
drawing.
each
3. Taper turning by tailstock offset method as per drawing.
experiment
4. To prepare the job by eccentric turning on lathe machine.
5. To perform square threading, drilling and taper turning by compound rest as per
drawing.
6. To study shaper machine, its mechanism and calculate quick return ratio.
7. To prepare mould of a given pattern requiring core and to cast it in aluminium.
8. To perform moisture test and clay content test.
9. Strength Test (compressive, Tensile, Shear Transverse etc. in green and dry
conditions) and Hardness Test (Mould and Core).
10. To perform permeability test
11. A.F.S. Sieve analysis test.
12. Hands-on practice on spot welding.
13. Hands-on practice on submerged arc welding
14. Hands-on practice on metal inert gas welding (MIG) and tungsten inert gas
welding (TIG).

TOTAL 20 100

Reference:
1. James S Campbell, Principles of Manufacturing Materials and Processes, Tata McGraw Hill, 1995.
2. F.C. Flemmings, Solidification processing, Tata McGraw Hill, 1982
3. M J Rao, Manufacturing Technology: Foundry, Forming and Welding, Tata McGraw Hill, 1987.
3. G E Linnert, Welding Metallurgy, AWS, 1994.
4. P C Pandey and C K Singh, Production Engineering Sciences, Standard Publishers Ltd. 1980.

Course outcomes:
On successful completion of the course, the student will be able to:
1. To provide various angles on single point cutting tool by using grinding machine.
2. Able to perform various operation on different different machine.
3. Calculate Speed, Feed and Depth of cut.

Course Code : EM-202 Course Name : Employability Skills – III

LTPC : 0201 Total Contact Hours : 25
COURSE CONTENTS
S.No. Topic Details Contact
Hrs
1 Communication Negotiation & Reasoning, Interaction Process, Interpersonal 5
Relationship
2 Quantitative Number System, Ratio & Proportion, Partnership, 5
Percentage, Profit &Loss
3 Reasoning, Analytical Reasoning, Coding & Decoding, Series 5
4 Motivation Mission, Vision ,Goal, Motivation & Types of Motivation 5
Self Esteem, Winning strategies,
5 Preparation, Self Esteem, Preparation of CV, Writing Application, 5
presentation Placement Mantra

Course Title: INDUSTRIAL ENGINEERING Course Code : ME 216

Semester : III Core / Elective : Core
Teaching Scheme in Hrs (L:T:P) : 3:0:0 Credits : 3 Credits
Type of course : Lecture + Assignments Total Contact Hours : 36
Continuous Internal Evaluation : 40 Marks SEE : 60 Marks
Programmes: B.TECH (MECHANICAL ENGINEERING)

Pre-requisites:
Basic math and understand the industry problems.
Course Objectives:
▪ understand how functions within an organisation is managed
▪ use some standard tools and techniques to solve engineering management problems
▪ appreciate the interaction between Engineering and Management functions

Course Content:

Topic and Contents Hours Marks

UNIT-1: EVALUATION OF WORK STUDY 8 20
Work of F.W. Taylor, Frank and Lillian Gilbreth and others;
Productivity definition, Means of increasing productivity work study,
Human Factor in the application of work Study. 4

Motion Study; Definition, aims; Procedure for method study: selection

of jobs; Recording Techniques: Micro motion study: Therbligs;
Cychography and Chronocycle graph: Principles of motion economy.
design of work place layout: Analysis in the form of a chart; operation 4
chart; flow process chart; flow diagrams; string diagram; Man
Machine chart; Two hand chart; Simon chart.
UNITS-2: Work Measurement (Time Study): 07 20
Definition; uses; procedure; time study equipment; performance 4
rating; allowances, number of cycles to be studied. Determination of
standard time: Predetermined Motion Time Systems. 3
Job Evaluation: Objective of job evaluation; Methods of Job
evaluation; Non-quatative and quantative.
UNITS-3: Production Planning and Control: 07 20
Types of production; function of production planning and
control; planning Preplanning, sales forecasting; routing;
Scheduling; dispatching and control with other departments.
Plant Location and Layout: Selection of site, layout contributing
factors. Facilities available from Govt. and autonomous agencies,
Material handling system and equipments; layout according to the
manufacturing system. Procedure and techniques of layout and line
balancing.
UNIT-4: QUALITY CONTROL 7 20

Operational and economic definition of quality control, objectives of

quality control; Statistical quality control, Process capability studies:
Control charts for variable, control charts for average outgoing quality

UNIT 5: Materials Managements 07 20

 Materials Managements: Field and Scope of materials management
material planning and Programme. ARC control policy inverter,
control Economic lot size, lead time and recorder point, Inventory
models (Deterministic only)
Wages and incentives: Characteristics of a Good wage for incentive
system. Methods of wage payment Concept of wage incentive
schemes, financial and non financial Holsely premium plan. Merric's
Multiple piece rate system.
TOTAL 36 100

Reference:
1. Introduction to Study, ILO Publishers.
2. Statistical Quality Control, Grant EL& Leawethwarts R.S., McGraw Hill.
3. Facility Layout& Location, Francis R.C.& White J.A.Prentice Hall.
4. Production and Operations Management, Adam Everett E& Ebert Ronald J.PHI
5. Production and operations management; E.W.S. Buffa and S.Kapoor.

Course outcomes:
On successful completion of the course, the student will be able to:
1. understand human factor in the application of work study
2. to draw the operation chart; flow process chart; flow diagrams; string diagram; man
machine chart; two hand chart; Simon chart.
3. Integrated system of people, materials, information, equipment, and energy to meet
desired needs within realistic constraints (such as economic, environmental, social,
political, ethical, health and safety, manufacturability, and sustainability).
4. Understand the impact of engineering solutions in a global, economic,
environmental, and societal context.

Course Title: INDUSTRIAL ENGINEERING LAB Course Code : ME 262

Semester : III Core / Elective : Core
Teaching Scheme in Hrs (L:T:P) : 0:0:2 Credits : 1 Credits
Type of course : Lab Experiment Total Contact Hours : 20
Continuous Internal Evaluation : 60 Marks SEE : 40 Marks
Programmes: B.TECH (MECHANICAL ENGINEERING)

Pre-requisites:
Basics knowledge of industrial engineering

Course Objectives:
To study various experiments on industrial engineering.
Course Content:
Topic and Contents Hours Marks
LIST OF EXPERIMENTS 20 100
1. Determination of time standard for a given job using stopwatch
time- study.
2. Preparation of flow process chart, operation process chart and
man-machine charts for an existing setup and development of an Two hours
improved process. for each
3. Study of existing layout of a workstation with respect to controls experiment
and displays and suggesting improved design from ergonomic
viewpoint.
4. To carry out a work sampling study.
5. To conduct process capability study for a machine in the
workshop.
6. To design a sampling scheme based on OC curve.
7. To conduct Shewart's experiments on known population
8. Generation of random numbers for system simulation such as
facility planning, job shop scheduling etc.
TOTAL 20 100
Reference:
6. Production and Operations Management, William Stevenson, Mc Graw Hill Pub
7. Fundamentals of Operations Management, N J Aquilano and Chase, Irwin Pub
8. Production and Operations Management, Heizer Render, Allyn and Bacon Pub
9. Production and Operations Management, Adam Everett E& Ebert Ronald J.PHI
10. Production and operations management; E.W.S. Buffa and S.Kapoor.

Course outcomes:
On successful completion of the course, the student will be able to:
5. Determination of time standard for a given job using stopwatch time- study.
6. Preparation of flow process chart, operation process chart and man-machine charts for
an existing setup and development of an improved process.
7. To carry out a work sampling study.
8. To conduct process capability study for a machine in the workshop.
9. To design a sampling scheme based on OC curve.

Course Title: Computer Aided Machine Drawing Lab-I

Course Code:
(Software AutoCAD)
Semester : III Core / Elective:
PROGRAME CORE
Teaching Scheme in Hrs (L:T:P) : 0:0:3 Credits : 1
Credit
Type of course : Lab Experiment Total Contact Hours : 30
Continuous Internal Evaluation : 60 Marks SEE : 40
Marks
Programmes: B.Tech Mechanical Engineering

Pre-requisites:
This guide is designed for new users of AutoCAD. It is recommended that you have a working
knowledge of: • Microsoft® Windows® 7, Microsoft® Windows® 8 or Microsoft® Windows® 10.

Course Objectives:

The objective of this Lab is to teach students the basic commands and tools necessary for professional
2D drawing, design and drafting using AutoCAD and Student can modeled the drawing even in
CAD/CAM software by applying the basic knowledge of machine drawing.

Course Content:

Topic and Contents Hours Marks

LIST OF EXPERIMENTS (ANY 10) 20 100
1. Introduction to Compute Aided Machine Drawing software for 2D
and 3D Modeling: Basic design concepts, design process, stages in
design, flowchart.
2. Introduction to various CAD commands of drafting entities like
line, circle, polygon, cylinders; editing commands like move, rotate,
mirror, array; solution of projection problems on CAD.
3. To make a given 2-D drawing using CAD software. Two hours
4. To perform 3-D modeling. for each
5. Design of Conic sections: Ellipse, parabola, hyperbola by different experiment
methods.
6. Design of machine parts such as external and internal threads,
propeller shaft, bearings, springs, gears.
7. Design of Cotter and Knuckle joints.
8. Design of I C Engines parts - piston and connecting rods etc.
9. Editing a drawing using feature modification and Manipulation.
10. Isometric and Orthographic projections.
TOTAL 20 100

Reference:

1. Visvesvaraya Tech. University; A Premier on Computer Aided Engg drawing; VTU Belgaum.
2. Venugopal K.;Engineering Graphics; New Age.
3. Shah MB and Rana BC; Engg.drawing; Pearson Education
4. Narayana and Reddy; Machine Drawing; New age, Delhi.
5. John KC; Text Book Of Machine Drawing; PHI Learning.
6. Bhat, ND; Machine Drawing; Charotar.

Course outcomes:

On successful completion of the course, the student will be able to:

1) Use AutoCAD for daily working process.  Navigate throughout AutoCAD using major navigating
tools.
2) Understand the concept and techniques to draw.
3) Create multiple designs using several of tools.
4) Student can modeled this drawing even in CAD/CAM software by applying the basic knowledge
of machine drawing.
5) To enhance the ability to work as practicing mechanical engineers in manufacturing Industries and
consulting firms.
6) Improving skills to adopt modern methods in mechanical engineering as continuous improvement.

Course Title: Python Lab Course Code:

Semester : III Core / Elective:
PROGRAME Elective
Teaching Scheme in Hrs (L:T:P) : 0:0:3 Credits : 1
Credit
Type of course : Lab Experiment Total Contact Hours : 30
Continuous Internal Evaluation : 60 Marks SEE : 40
Marks
Programmes: B.Tech Mechanical Engineering

List of Python Program

1. Write a program to find root of quadratic equation
2. Write a program to find and delete repeating number in Given List
3. Write a program to input and print the element sum of user defined matrix
4. Write a program to input and multiply two different matrices
5. Write a program to compute eigen value and vector of a given 3*3 matrix using NumPy
6. Write a program to find a solution of linear equations in y‐mx+c
7. Write a program to draw line using equation y=mx+c
8. Write the program to determine the intersection point of two line.
9. Draw various types of charts using matplotlib
10. Write a program to perform equations of uniform motion of kinematics :
i. v = u + at0
ii. s = ut + ½(at2)
iii. v2 = u2 – 2as
11. Write a menu driven program to perform following properties of thermodynamics as given
below:
i. First Law of thermodynamics ( U = Q ‐ W), where ΔU is the change in the internal energy. Q
is the heat added to the system, and W is the work done by the system.
ii. Efficiency of Heat Engine = TH – TC / TH where TH & TC is the temperature of HOT and
COLD
Reservoirs.
12. Write the menu program to find the to find the out relationship between stress and strain
curve as given below:
i. Young’s Modulus
ii. Shear Modulus
iii. Poisson Ratio
13. Write the program to determine the shear force and bending moment in beams.
14. Write a program to find maxima/minima of functions of two variables and evaluate some real
definite and finite integrals.
15. Write a Program to find out unknown magnitude of TB and TD of unknown tension can be
obtained from two scalar equations of equilibrium i.eEF_x = 0 and EF_y =0.
16. Write a program to perform interpolation of equally and unequally spaced data.
17. Write a program to calculate total pressure exerted in ideal fluid as equation is given below:
p+1/2(ρv2) + ρgh =constant
Where P is Pressure, V is Velocity of fluid, ρ is density and h is the height of the container.
18. Write a program to find numerical differentiation using Finite differences Method by
importing NumPy and plot the numerical values using matplotlib libraries of python.
19. Write a program for bresenham’s line drawing algorithm.
20. Write a program for geometric transformation of a given object.

Course outcomes: The students will be able to

• Apply conditional statement, loops condition and functions in python program
• Solve mathematical and mechanical problems using python program
• Plot various type of chart using python program
• Analyze the mechanical problem using python program