TS-W116

802.11 AX, Triple-band, AI Powered

Product Overview
TS-W116 is a new-generation 802.11ax Turbo Sense AI AP., it adopts triple-band smart antenna, support MU-

MIMO, OFDMA and 1024QAM modulation and demodulation algorithm, it’s wireless transmission speed can be up to

1.901Gbps, a higher wireless access rate and wider wireless coverage are provided. TS-W116 can easily meet all kinds

of wireless services, such as video, voice and other multimedia services, and provide intelligent radio frequency, service

quality assurance, seamless roaming and so on.

TS-W116 supports innovative AI RF chips. The independent AI RF can actively sense the wireless network's service

quality, environment quality, and security, in cooperation with the NAC series controllers, TS-W116 brings an

intelligent and better users experience.

TS-W116 adopts the GE port for uplink, ensuring high-speed wireless transmission. can be powered via POE or

local power adapter, the AP is aesthetically designed and can be conveniently mounted on the ceiling, wall, or placed

on the desk.

TS-W116

-1-
 Product Features
Built-in independent AI RF chip
➢ AI RF sense service quality
The AI chip can automatically switch to terminal mode, simulate the way the terminal accesses the wireless network,
check network services, actively detect network problems in user services, and notify the network administrator when a
link failure occurs. At the same time, it provides troubleshooting suggestions, so that users can save worry and effort.
➢ AI RF sense environment
The AI chip supports all-round detection of wireless network channel utilization and interference conditions near APs,
and supports one-key channel optimization, effectively solving wireless network optimization pain points.
➢ AI RF sense security and provide the defense
The AI chip supports wireless countermeasures. Compared with traditional APs, the AI radio frequency module of Turbo
Sense AI series APs can provide full-time radio frequency defense, without affecting the normal network usage of users,
and at the same time users no longer need to deploy counter APs separately, which reduces the overall network cost.

Top-speed wireless network access

➢ Wi-Fi 6 high-speed access
AP TS-W116( series products comply with the new-generation 802.11ax standard and are embedded with an intelligent
antenna matrix, it adopts three radio frequency design, supports MU-MIMO, allows AP to receive data sent by multiple
terminals at the same time, the maximum transmission rate of the whole machine can reach 2.642Gbps, which can
effectively provide higher coverage, access density, traffic throughput, etc.
➢ GE uplink
A 10/100/1000Base-T Ethernet port is used as the uplink port and a GE port is used for uplink, breaking the restriction of
traditional 100M transmission rate. The wired port is no longer the bottleneck of the wireless access rate.
➢ QoS guarantee
TS-W116( supports different QoS levels. It supports air interface resource management based on applications, SSIDs
or STAs to ensure that air interfaces are appropriately allocated and that the data of important SSIDs and applications is
transmitted in preference. Transmission priorities can be defined for different service data through 802. 11e/WMM.
This ensures differentiated QoS levels.
➢ Seamless roaming for L2 and L3
TS-W116( works with wireless controller to implement seamless roaming for L2 and L3. When a wireless user roams,
the IP address and authentication status remain unchanged. The terminal viscosity prevention function is provided to
intelligently guide an STA to the optimal AP, increasing the roaming speed.
➢ Terminal dragging prevention to ensure high-speed network access for all users on the entire network
Terminal dragging prevention involves enabling terminals with different negotiated rates to occupy the identical wireless
channel time by using the time fairness algorithm. This avoids problems of low wireless access speed, high delay and low
network performance caused by low access rates of some terminals.
➢ Intelligent load balancing
In the case of high-density wireless users, AP TS-W116( works with wireless controller to implement intelligent load
balancing based on the user quantity, traffic, and frequency band for the purpose of improving the bandwidth usage,
thereby ensuring high wireless access speed for users. Frequency band-based load balancing enables 2.4/5 GHz dual-
frequency terminals to access the 5 GHz frequency band in preference.
➢ Intelligent RF to reduce wireless interference in an all-round way
The work channel and transmit power of the wireless access point are adjusted automatically and interference from the

-2-
 surrounding environment is detected in real time to reduce radio interference in an all- round way and to improve the
overall service quality of the wireless network.

All-round security protection

➢ Multiple easy-to-use and secure authentication modes
Multiple flexible, easy-to-use and secure user authentication modes are available. 802. 1x, portal, SMS, WeChat, and QR
code authentication modes are provided with the support of wireless controller to meet network deployment
requirements in environments including enterprises, schools, shopping malls, hotels, and financial organizations.
➢ AP VPN remote access
AP can build a VPN tunnel to the controller side, in this way the clients can access the resources in the HQ, at the same
time, the internet access will go directly to the internet without being tunneled back. In small branches there is no need to
deploy a VPN device, help to reduce the investment for the customer.
➢ All-round wireless security protection
With the support of wireless controller, AP TS-W116 provides a wide range of wireless security protection functions
including WIDS/WIPS, illegitimate AP detection and workaround, ARP spoofing prevention, and DoS attack
prevention, constructing a truly secure and reliable wireless network for users.
➢ Timed turning off of RF for network security and environment protection
RF can be turned off and on based on time periods. The wireless network can be automatically turned off at nights and
weekends to prevent malicious users from intruding the network and to reduce energy consumption of the equipment.

Flexible network deployment

➢ Gateway function to implement remote deployment across the public network
TS-W116 supports the NAT gateway function and provides the functionality of the DHCP server and DNS proxy. When
remotely deploying the wireless network for a branch or outlet, the PPPoE dial-up function provided by AP TS-W116(
can be used to directly access the Internet, lowering the network construction costs.
➢ Thin and Fat mode
Based on the requirement, AP TS-W116 can easily change the working mode between thin AP and standalone AP. In
the early stage of the network deployment, the AP can be used as standalone mode, with the development of the network,
the AP can be changed to FAT mode to be managed by the controller.
➢ WDS wireless relay/bridge
AP TS-W116 supports WDS and wireless relays/bridges in point-to-point or point-to-multipoint mode to resolve
deployment problems like deployment inconvenience. The WDS function is used to relay and amplify signals for the
purpose of extending the wireless coverage scope. The Ethernet port of a wireless relay AP can be connected to a wired
switch to extend the wireless coverage scope and wired LAN.
➢ Bridge mode forwarding
With the bridge mode forwarding technology, TS-W116 can directly forward data that features high real-time
transmission requirements, delay sensitivity, and large amount over the wired network without passing the wireless
controller. This alleviates the traffic load of the wireless controller significantly and breaks the traffic restrictions of the
wireless controller.
➢ Virtual AP technology
A maximum of 32 ESSIDs can be provided by using the virtual AP technology. Different SSIDs use different
authentication modes and have different network access permission. The SSIDs are isolated from each other. L2 isolation
can be implemented for terminals that use the same SSID on a subnet or VLAN to ensure user data security.
➢ SSID
An SSID with a maximum of 31 characters can be specified. An SSID can also contain both Chinese and English characters.
-3-
 Individualized SSIDs are available for shopping malls or enterprises to improve discrimination.

Bid data analysis

➢ Access analysis
Build-in access analysis system, support report the device appear time, MAC address, and report the data differently in
the first access and repeat access, passerby and total number coming and not coming in. Also, will show the duration of
stay. Based on the statistics, will have a better understanding of the clients in the network and offer information for the
operators to make decision.

➢ User profiling
User profiling based on the statistics and summary of information such as the status and attributes of individual and group
user. For industry users, it can be customized for the content that industry users are concerned about. By setting concern
information and related prompt information, it can effectively help industry users analyzing the behaviors of users in the
region, such as: for users in the education industry, can effectively analyze and provide a basis for risk assessment and
judgment to prevent students from skipping classes, leaving school, campus loans and other behaviors. Cooperate with
's next-generation network controller to collect and analyze customer visit preferences, rush hours, frequency of
occurrence, stay time, Wi-Fi usage time, terminal type, user tags and other information, and can query the users of a single
user The portrait and the activity trajectory of a single user (activity time axis) can help decision-makers make targeted
decision-making adjustments.

➢ APP and file cache

The controller and the USB drive on the AP can cache the application for iOS and android devices. It will help to accelerate
the network. Also, it will help to accelerate the app authentication.

-4-
Technical Specifications
Hardware specifications

Product Specifications of TS-W116

Hardware specifications

Item Description

Model TS-W116

Weight 0.5Kg

Dimensions (excluding antenna interfaces and

accessories) 195 x 195 x 43 mm

Ethernet port 1*10/100/1000 Mbps port

PoE 802.3 at/bt

Local power supply 12 V/2A
Transmit power ≤20dBm
Power adjustment granularity 1 dBm
Power range 1 dBm to the value specified by national regulations

Power consumption < 13.5 W

Antenna Omnidirectional antenna

Reset/restore factory settings Support

Status indicator 1*Status, 1* POE status, 1*speed

Operating/storage temperature - 10ºC to 45ºC /-40ºC to 70ºC
Operating/storage humidity 5%-95% (non-condensing)

Protection level IP 41
MTBF > 250000 H

Software specifications

Software specifications

Item Description

Model TS-W116
Special Stream 6

Maximum
Radio1：2.4G：2*2 MIMO
transmission speed
of a single Radio2：5G：2*2 MIMO
RF frequency Radio3：2.4G/5G：2*2 MIMO

Wireless Speed 1.901Gbps (2.4G: 400Mbps, 5G:1201Mbps, Sense RF:300Mbps*)

Operating 802. 11ac/n/a: 5.725-5.850 GHz, 5.15-5.35 GHz (China)
frequency band 802. 11b/g/n: 2.4-2.483GHz (China)

-5-
Software specifications

OFDM: BPSK@6/9 Mbps, QPSK@12/18 Mbps, 16-QAM@24 Mbps, 64-QAM@48/54

Mbps
Modulation DSSS: DBPSK@1 Mbps, DQPSK@2 Mbps, [email protected]/11 Mbps
technology MIMO-OFDM: MCS 0- 15
MIMO-OFDM (11ac): MCS 0-9
MIMO-OFDMA (11ax): MCS 0- 11

11b：DSS: [email protected]/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps

11a/g: OFDM:64QAM@48/54Mbps,16QAM@24Mbps, QPSK@12/18Mbps,
Modulation BPSK@6/9Mbps
methods 11n：MIMO-OFDM: BPSK, QPSK,16QAM,64QAM
11ac：MIMO-OFDM: BPSK, QPSK,16QAM,64QAM,256QAM
11ax：MIMO-OFDMA: BPSK, QPSK,16QAM,64QAM,256QAM, 1024QAM
802. 11a, 802. 11n, 802. 11ac,802. 11ax (compatible with 802. 11a): 13 channels
Channel quantity
802. 11b, 802. 11g, 802. 11n, 802. 11ax, (compatible with 802. 11b/g mode): 13 channels

Manual and
automatic channel Support
adjustment

Automatic power
Support
adjustment

Manual power The AP supports manual power adjustment with an adjustment granularity of 1 dBm.
adjustment The power scope is from 1 dBm to the value specified by national regulations.

Timed turning on
RF can be turned on or off based on the specified time period.
or off of RF

Coverage black
hole detection and Support
compensation

Recommend
40
connected users
Connected user
Support
quantity restriction

Virtual AP 36

Chinese SSID Support

SSID hiding Support

User-, traffic-, and

WLAN function frequency band-
Support
based intelligent
load balancing

Bandwidth
STA, SSID, or AP-based rate limiting is supported.
restriction
Abnormal STA disconnection detection, STA aging detection, and STA statistic and
STA function status query are supported.

Environment sense Support

Security sense Support
-6-
Software specifications

Service sense Support

Pre-shared key authentication, portal authentication, 802. 1x authentication, CA

Authentication certificate authentication, WeChat authentication, SMS authentication, QR code
mode authentication, temporary visitor authentication, and authentication exemption are
supported.

Pre-shared key WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK, WPA3

Intelligent terminal type identification is supported. A page matching the terminal size is
Portal pushed to terminals. The page logo and displayed information can be customized. In
authentication addition, the verification, authentication interval, and reconnection authentication time
thresholds can be set.

802. 1x one-key configuration and 802. 1x perception-free authentication are supported.

802. 1x You only need to download the one-key automatic configuration tool at initial access
authentication and finish wireless network configuration quickly. This simplified network deployment
significantly.

High-security certificate authentication can be implemented by using the CA certificate

CA certificate issuance center embedded into the controller, without the need to constructing a
authentication certificate server. Authentication by using a certificate imported from an external
certificate server is also supported.

SMS authentication takes effect forever. That is, a user can directly access the network
SMS authentication without authentication after being authenticated via SMS at initial access. This reduces
the SMS costs and improves user experience.
Security
After a visitor terminal accesses the wireless network, the terminal will automatically
authentication
display a QR page. The approver scans the QR code of the visitor terminal via a cell
QR code
phone and then the visitor can access the Internet. The visitor information is recorded in
authentication three dimensions: approver, remarks, and MAC address of the visitor terminal. This
ensures user traceability and network security.

MAC + portal The device in the MAC address list do not need authentication, the other device still
authentication need authentication

A temporary user information management system is embedded. A temporary user can

log in within the validity period and cannot after the validity period elapses. A secondary
Temporary visitor permission system for temporary account management is embedded and temporary

authentication accounts can be created and managed in this system. The QR code of a temporary visitor
can be printed and the temporary visitor can scan the QR code to access the network.
Temporary visitors can be grouped.

Only a portal advertisement page is displayed. A user needs to click the login button to
Authentication
access the network without entering any account password or performing other
exemption
authentication.

Self- registration Clients can register the account via portal, and Retrieve password via SMS
Email binding Support binding account with email, and Retrieve password via email
Data encryption Data encryption via TKIP and AES (CCMP) is supported.
Blacklist and
Static whitelist and blacklist and dynamic blacklist are supported.
whitelist

-7-
Software specifications

SSID-based isolation, automatic VLAN grouping, and user isolation of specified

User isolation VLANs are supported.

WIDS/WIPS Support
Anti-phishing Support
East-west traffic Support
security

Account-, access location-, access terminal type- and SSID-based ACL policy
ACL
assignment and management are supported.

Radius protocol Support

Disaster Recovery When the wireless controller is down, The AP still can broadcast SSID and provide
authentication and connection service.
E-schoolbag
The transmission speed of multicast packets is increased, improving the effects of the E-
scenario
schoolbag scenario in an all-round way.
optimization
Intelligent
The transmission speed of broadcast packets is automatically increased based on the
broadcast
actual environment, thereby improving the transmission efficiency of broadcast packets.
acceleration
Terminal dragging This function aims to prevent the decrease of the entire network speed caused by low-
prevention speed terminals based on the time fairness algorithm.

Terminal viscosity This function involves detecting STAs connected to APs and intelligently guiding the
prevention STAs to the optimal AP.

Prohibited access of The speed of access terminals is limited. Weak-signal terminals with a speed lower than
low-speed the specified value are prohibited from accessing the network. This improves the entire
Wireless network speed.
terminals
optimization
High-density access
The response to broadcast probe requests is controlled for the purpose of optimizing
scenario
optimization high-density access scenarios.

ARP-unicast ARP broadcast packets are converted into unicast packets. This reduces the number of
conversion broadcast packets, thereby improving the transmission speed.

Prohibited DHCP
After this function is enabled, DHCP broadcast requests will be forwarded only to the
requests destined
wired network, instead of another wireless network. This improves the network
for wireless
terminals throughput and performance of the wireless network.

AP-based access
The number of connected users and change trends of each AP in the recent one day, one
user quantity
week, and one month can be measured.
statistics
AP-based network
The network access traffic and change trends of each AP in the recent one day, one
access traffic
statistics week, and one month can be measured.
Hotspot analysis
AP-based signal Statistical analysis for the signal usage, noise, retransmit rate, BER, and BER change
quality analysis trends of each AP is supported.

-8-
 Software specifications
L2 broadcast automatic discovery
AC discovery L3 discovery based on configured static IP addresses
mechanism DHCP Option43 discovery
DNS domain name discovery

Cross-WAN and
cross-NAT remote Support
AP deployment

AP access mode Controller IP addresses can be dynamically discovered by using the webAgent
webAgent
technology. This avoids AP disconnection caused by unfixed controller IP addresses.

Tunnel encryption Support

NAT Support
Network access
PPPoE dial-up and static IP address
mode
L3 function
DHCP server Support
DNS proxy Support

Build the VPN tunnel between the controller and AP, access the application in HQ via
VPN AP VPN
tunnel, but other traffic will go direct to the internet

Fit mode Via controller, SSH, telnet, http/https

Management
Fat mode SSH, telnet, http/https

Order Information
Model Specifications Remarks
TS-W116
Turbo Sense AI series Wi-Fi 6 high-performance wireless access point,
support 802. 11ax protocol, built-in independent AI sensing radio
TS-W116
frequency, the maximum access rate of the whole machine is 1.901Gbps,1
Gigabit Ethernet port.
Essential

802.3at 30W gigabit PoE injector, suitable for all AP that support POE
GO545-PSE1000 except S900plus. Optional

The V-Sec Switch, provides 28 ports (24 10/100/1000Base-T POE ports,

4 SFP optical ports). Support IEEE 802.3af/at power supply standard,
single port maximum output PoE power 30W, the whole machine
maximum output PoE power 370W, switching capacity 336Gbps/3.36Tbps,
Forwarding rate 108Mpps/126Mpps. The Switch can be used in fit or fat
mode (standalone mode) flexibly. In fit mode, it can be managed by NAC
RS3320-28M-PWR-LI
controller to provide a unified wired and wireless network. All the features
can be configured by NAC controller such as VLAN, STP, Static
Routing/RIP/OSPF, M-LAG, East-West traffic security, Smart Network Optional
Topology, Visualized DHCP server, Terminal Identification, 802. 1X/Portal
authentication, IPv6, POE supply schedule. etc., to make the network
simpler, more secure, and valuable.

-9-