FS N41N

NEW Digital Fiber Optic Sensor
FS-N40 Series
A Return To Simplified Sensing
A Genuine All-Purpose Solution

Easier and More Stable Than Ever Before
FS - N40 Series
A SIMPLE and RELIABLE Solution for
Any Application
Fiber optic sensors provide a variety of solutions that are
unmatched by any other type of sensor. The high-powered,
yet precise, amplifier combines with a variety of flexible
and compact fiber heads to tackle all sensing needs.
Fiber Unit Indicator
Intuitive Display
NEW
Digital Fiber Optic Sensor

FS-N40 Series
2
THE POWER OF
FIBER OPTIC SENSING
FLEXIBLE
Handle any and all applications with one
high-powered amplifier and a variety of
head options.
• Detect Anything
• Detect Anywhere
SIMPLE
Setup is handled quickly and easily with
this intuitive amplifier.
• Easy to Read Display

• Innovative Fiber Units
RELIABLE
Detection remains stable in any situation
or environment.
• Built-In Preventive Maintenance

• Clear Status Indication
3
Flexible
Enhanced power makes

the FS-N40 Series more
capable than ever before.
Power Select Switch
TERA Switch
Go from standard to
high-power with
the flick of a switch
NEO Parabolic LED
Detect Anything
Contrasts/ Distant Transparent Targets in Small

Surface Finishes Targets Targets Varying Positions Targets
Detect Anywhere
Tight Oily/Wet High Temperature Environments with On Robotic

Spaces Environments Enviroments Chemicals Arms
4
Long Range and Stable Detection with Any Head
With industry leading high-power, the FS-N40 Series enables long range detection with even the thinnest of fiber heads.
This also ensures detection remains stable in environment where build-up occurs.
Previous (FINE) FS-N40 (TERA)

Thrubeam
[1 mm 0.04" 140 mm 800 mm
Cylindrical] 5.51" 31.50"
Previous (FINE) FS-N40 (TERA)
Reflective
[M3 Threaded]
72 mm 590 mm
2.83" 23.23"
Increased Detection Capabilities
The FS-N40 Series has not only increased its power, but has
also greatly improved its signal to noise ratio. This allows for Contrast changes
consistent and reliable detection of changes in contrast,
surface finish, and position.
Surface finish
changes
Simple position
changes
Deeper Understanding
New LED Module - “NEO Parabolic LED”

The high-power of the FS-N40 Series is derived from the use of a new LED module. This module boasts a high
brightness LED and efficient circuit design, along with a parabolic mirror that ensures the majority of the light is
transmitted into the fiber optic cable.
❚ Evolution of LED Modules

Higher-power LED Lens + circular reflector NEO Parabolic LED
Parabolic Greater
mirror efficiency
High Greater
brightness light
LED intensity
Most light is not transmitted Some light is not transmitted All light is concentrated and transmitted
5
Simple
NEW INNOVATION
Easy to Read Display

No manuals required with this easy to
understand interface.
❚ Conventional Display ❚ FS-N40 Display
Innovative OLED Display

The introduction of an OLED display places the FS-N40 Series leaps-and-
bounds ahead of conventional fiber amplifiers. The ability to see clear and
detailed information on a single screen dramatically reduces setup time.
Bar Graph Display Easily Understandable Messages
Simplify the display even No need to decipher cryptic

System Keys
further by representing the light display messages. Identify any
Error Locked
intensity as a bar graph. This issues or scenarios that the
comes complete with a sensor may be experiencing Low Check Dip
threshold point indicator and by simply reading the display. Intensity Switch
peak/bottom value flags.
Saturate
PIN Code
Cancel
Peak value ON/OFF point Bottom value
6
WORLD’S FIRST
Fiber Units with Built-In Indicators

Quickly and easily recognize
the sensor status by simply looking at
the fiber head
Integrated ON/OFF Status Indicators

It is no longer necessary to look inside of a control box and locate the
proper amplifier to determine the detection status of a specific sensor.
These innovative fiber heads, will light in Green when the output is ON for
immediate recognition of the sensor status.
Alignment Assistance Easy Head Identification
Alignment has never been Quickly recognize which head

Green light comes on
simpler with Optical Axis when optical axes are aligned is being programmed by
Assistance. The fiber unit lighting the fiber head in green.
illuminates when the two heads This prevents any unnecessary
are aligned, eliminating the confusion during setup.
guesswork and time
associated with alignment.
7
Reliable
Built-In Preventive Maintenance Features
Harsh Environment Adjustment Automatic Power Control
Datum mode automatically adjusts the live and set values When high precision detection is of the utmost concern,
to compensate for build-up and maintain stable detection. the light intensity can be automatically regulated to ignore
the effects of power fluctuations.
Light decreased by Initial detection

dirt or dust status restored
93.6 100.0
Compensates for ambient conditions automatically
Interference Prevention Heat Sink
Prevent interference between up to 16 units that are Concerns about heat generation, and temperature
connected together (KEYENCE 1-Line System), or 2 induced strain on internal component, are eliminated with
units that are not connected together. the built-in heat sink.
1 Detects ambient light

2 Shifts emission periods
Ambient
light
Customizable Interface for Clear Status Indications
Uniform Calibration and Display Various Display Option
With the push of a button, the set value and current value The FS-N40 Series offers countless display and sub-
can be automatically calibrated to 50.0% and 100.0% display options. This allows users to view the data how
respectively. This enables easy identification of detection they see fit and ensures clear understanding.
statuses and maintenance needs at a glance.
Maintenance
required
Low
intensity
8
Additional Features
Highly Visible Indicator Saturation Canceling
The highly visible indicator, with an area 8.7x larger than A simple button combination is all that is needed to
conventional models, ensure that the ON/OFF status of eliminate saturation and ensure stable detection of
the sensor can be seen from a distance. transparent, tiny, or highly reflective targets.
Network Compatibility IO-Link Compatibility

(FS-N41C Only)
Industrial network integration is possible with the use of The FS-N41C amplifier can communicate a large variety
the KEYENCE NU Series. Multiple network options are of information over IO-Link. This includes the live value,
available! set value, settings, and much more.
Selectable Language Options Bipolar Outputs

(FS-N41C Only)
Language selection options for English, Japanese, Regardless of NPN or PNP output needs, only one part
Chinese, and Germen have been added to guarantee number is required. The FS-N41C offers a bipolar
global ease-of-use. selectable output.
Bipolar Outputs
NPN PNP
Same model
NPN/PNP switching output
9
NEW INNOVATION
Multi-Output Unit
Dramatic Reductions in Cost and Time
Reduce Startup, Operation, and Maintenance Workloads
Multi-Output Unit
FS-MC8N/P
n
LY o
N s
O ble
de a
si c
e nd
on s a
r
be
Fi
Reduced Cables
The Multi-Output Unit provides a
Conventional
clean cable layout with just one Units
power supply/output cable coming

from the device. Replacing or
adding sensors has also never
been easier; since now there is no
longer a need to reroute cables. Terminal block
Multi-
Output
Unit
Terminal block
10
Memory Function
The settings for up to 8 connected amplifiers can be saved on
the Multi-Output Unit. If any of the amplifiers need to be replaced,
the settings can be batch written to the new amplifiers,
eliminating the need for any manual recalibration. Up to 3 memory
LO
banks can be configured to provide easy changeover between
AD
SA
VE
different runs on a machine.
Benefits During Every Stage of Use
Setup Changeover Troubleshooting Maintenance
Duplicate settings for Quickly switch between Return the sensors to When replacing a unit,
fiber amplifiers installed 3 bank of settings when their correct settings with transfer necessary
on standard machines. running different parts. the push of a button. settings in seconds.
Easily Add Amplifiers without Extra Wiring

Adding amplifiers is a breeze with only one cable needing to be
routed for the entire setup. Route this multi-core cable once and
simply connect amplifiers as they become necessary.
11
Versatile Wiring and Expansion Options
Options for Any Situation
When Network Compatibility is Necessary
Network
Communication
Unit
Network Communication Unit

NU Series
When Saving Space is Important
Multi-Output Unit
Multi-Output Unit
FS-MC8N/P
ing
d wir
p lifie
Sim
When Standard Connections are Adequate
Main Unit +
Expansion Units
Expansion connector
Just one cable
for each
expansion unit
12
Compatible with a range of open industrial networks
Control multiple sensors at once via network communication
*EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
Increase Efficiency During Startup, Operation, and Maintenance
Memory function enables speedy settings recovery and easy changeover

Drastically decreases the number of necessary cables
Simplified Wiring Easy Program Changeover Effortless Maintenance
Best-Selling and Reliable Simplified Wiring
Connect up to 17 amplifiers, featuring stable interference prevention
13
Lineup
Amplifier Units Multi-Output Units
Cable type
Main Expansion
unit unit
Model Control External Model Separate control Common Common

Type Type
NPN output PNP output outputs input NPN output PNP output outputs output input
Main unit FS-N41N FS-N41P Main unit FS-MC8N FS-MC8P 8 1 1

Standard 1 0
Expansion unit FS-N42N FS-N42P
Main unit FS-N43N FS-N43P

2-Output 2 1 Optional Parts (sold separately*1)
Expansion unit FS-N44N FS-N44P
Description Model
Amplifier securing bracket
(for main unit)
OP-88245
OP-88245
M8 Connector type
End units*1
(when using expansion units)
Model Control External OP-26751 OP-26751

Type (Set of 2)
Switchable between NPN/PNP output outputs input
Main unit FS-N41C 2* 1*

M8 connector cable
*Switchable between 2 control outputs or 1 control output + 1 external input. 2 m 6.6'/10 m 32.8' 2 m 6.6' type
The system is not compatible with expansion units.
OP-73864
10 m 32.8' type
OP-73865
Zero line type

Expansion converter unit
This adapter allows the FS-N40
series to connect to non-NEO type
OP-87199
expansion units using the
Type Model Control output
KEYENCE 1-Line System.
Expansion unit FS-N40 None*
*Counted as 1 output if expanded with Multi-Output Unit FS-MC8N/P or the NU Series *1 Multi-output units come with end units.
communication unit.
Network Units Network Unit Optional Parts (sold separately)
Type Appearance Network Model Model Type
Version 1.10 supported

OP-79426
CC-Link dedicated cable 20 m 65.6'
EtherNet/IPTM NU-EP1
Version 1.10 supported
OP-79427
CC-Link dedicated cable 100 m 328.1'
DeviceNetTM NU-DN1 OP-51504 STP (Shielded twisted-pair) cable 0.2 m 0.7'
Communication unit
OP-51505 STP (Shielded twisted-pair) cable 0.5 m 1.6'
EtherCAT® NU-EC1
OP-51506 STP (Shielded twisted-pair) cable 1 m 3.3'

CC-Link NU-CL1
OP-84338*1 e-CON connector (2 pieces included)
*1 Use a cable with sheath outer diameter of 1.15 to 1.35 mm 0.045" to 0.053" and wire range of
0.1 to 0.5 mm2 0.000155 to 0.000775"2.
To connect a device using a cable other than as specified above, prepare an e-CON connector that
conforms with its wire diameter.
14
Model Page Model Page Model Page
FU- 10 P29 FU- 5F P21 FU- 79 P23

FU- 5FZ FU- 79U
FU- 11 P33
FU- 50 FU- 80TZ
FU- 12 P24 FU- 80MTZ
FU- 51TZ P22
FU- 13 P34 FU- 52TZ FU- 81C P32
FU- 15 FU- 53TZ FU- 82C
FU- 16 P21 FU- 54TZ FU- 83C
FU- 16Z FU- 55 P21 FU- 84C P24
FU- 18
FU- 56 P21 · 22 FU- 85A P32
FU- 18M
FU- 85H
FU-56TZ P22
FU- 20 P29 FU- 85Z
FU- 57TE P23
FU- 21X P26 · 28 FU- 86A P24
FU- 57TZ P22 FU- 86H
FU- 22X P27 · 31
FU- 58 P21 FU- 86Z
FU- 23X P27
FU- 58U P21 · 23 FU- 87 P32
FU- 24X P26 · 28 FU- 87K
FU- 59
FU- 25 P26 FU- 59U FU- 88 P24
FU- 31 P30 FU- 6F P26 FU- 88K
FU- 32 P22 FU- 61 FU- 91 P32

FU- 61Z
FU- 33 P30 FU- 92 P23
FU- 63 P31
FU- 34 P22 FU- 93 P33
FU- 63T
FU- 93Z
FU- 35FA P26 · 28 · 29 FU- 63Z
FU- 95
FU- 65X
FU- 35FG P19 · 28 · 29 FU- 95HA
FU- 66 P26 FU- 95S
FU- 35FZ P26 · 28 · 29
FU- 66TZ FU- 95W
FU- 35TG P19 · 28 · 29 FU- 66Z FU- 95Z
FU- 67
FU- 35TZ P26 · 28 · 29 FU- 96 P23
FU- 67G P19 FU- 96T
FU- 37 P30
Fiber Unit FU- 38
FU- 67MG
FU- 67MTG
FU- 97P P32
Index FU- 38H

FU- 38K
P32 FU- 67TG
FU- 97S
FU- 98 P23
FU- 67TZ P26
FU- 38L P30 FU- 67V FU- A05 P24
FU- 38LK P32 FU- 68 P31 FU- A05D P33
FU- 38R P30 FU- 69U
FU- A10 P24
FU- 38S FU- 69X
FU- A10D P33
FU- 38V FU- 7F P20
FU- A40 P24
FU- 4F P27 FU- 70U P23
FU- A100
FU- 4FZ
FU- 70TZ P20 FU- E11
FU- 40 P28 FU- E40
FU- 70TU P23
FU- 40G
FU- L50Z P20
FU- 71 P20
FU- 40S P30 FU- L51Z
FU- 71Z
FU- 41TZ FU- L52Z
FU- 42TZ FU- 73 P22 FU- L53Z
FU- 75F FU- L54Z
FU- 43 P31
FU- 76F
FU- 43TZ P30 FU- L41Z P27
FU- 77 P20
FU- 44TZ FU- R6F P18
FU- 77G P19 FU- R67
FU- 45X P27 · 31
FU- 77MG FU- R67G
FU- 46
FU- 77MTG FU- R67TG
FU- 47TZ P30 FU- 77TG FU- R67TZ
FU- 48 P27 · 31 FU- 77TZ P20 FU- R7F
FU- 48U FU- 77V FU- R77
FU- 49U FU- 78 FU- R77G
FU- 49X FU- R77TG
FU- R77TZ
FU- V7FN P35

FU- V84
FU- V84L
FU- 2303 P19 · 28 · 29

Thrubeam Reflective
P25 P28 · 29 FU- 2540 P29
Lenses Lenses
15
Solve Any and All Applications
Mounting/Space Constraints
Integrated Bracket Fibers Threaded and Hex-shaped Fibers

The fiber is already integrated into a Threaded models can be easily mounted
L-shaped bracket for quick and painless to a machine with one or two nuts.
installation. Hex-shaped model provide easy cable
routing and prevent snagging.
Thrubeam Thrubeam
Models Models
P20 P20
Reflective Reflective
Models Models
P27 P26
Difficult Detection Targets

Fiber Units Long Distance Targets Transparent Targets
FU Series By focusing the light being emitted, these The use of a reflector allows these fibers
fibers can see targets at distances that are to stably detect transparent targets with
too far for conventional fibers. ease.
Thrubeam
Models
P21
Retro-
Models Models
P28 P34
Demanding Environments
High Traffic/Guarded Oil/Chemical Exposure

Perfect for high traffic environments, these The fluorocarbon resin coating allows
guarded fibers will not be damaged by these fiber units to be used in locations
crushing, pinching, or snagging. where oil or chemical exposure is
constant.
Thrubeam Thrubeam
Models Models
P19 P23
Models Models
P19 P32
16
Flat Bracket Fibers Cylindrical Fibers Sleeve Type Fibers
These low profile fibers provide a compact These fibers can fit in nearly any location These fibers feature a thin sleeve that can
design and integrated mounting holes for and are held in place with a set screw. be routed into the necessary detection
easy installation in tight spaces. location, while being secured somewhere
else.
Thrubeam Thrubeam Thrubeam
Models Models Models
Setscrew
P22 P21 P22
Reflective Reflective Reflective

P30 P27 P30
Varied Position/Falling Targets Small Targets Liquid Levels

By looking over an area, instead of a fixed With the use of built-in or attachable It is possible to reliably detect liquid levels
point, it is possible to detect falling targets lenses, the light is focused to a fine point using fibers. This can be done through
or targets that are not in repeatable for consistent small target detection. immersion or by attaching them to a
positions. transparent tube.
Thrubeam
Models
P24
Reflective Reflective Reflective

P33 P28 P33
Robotic Arms/Constant Motion Vacuum Chambers High Temperature Locations

With bend ratings of up to 50 million These specially designed fibers can be Detect targets in high temperature
bends (typical value), these fibers are ideal used in vacuum environments and still environments with fibers that can
for robotic integration or anywhere provide stable detection. withstand temperatures of up to 350°C
consistent bending occurs. 662°F.
Thrubeam
Models Thrubeam
Models
P23
P24
Reflective Thrubeam Reflective
P31 P35 P32
17
Featured Fibers
NEW ACTIVE RECEIVER FIBER UNITS
Thrubeam
Threaded and Hex-Shaped Active Receiver Fibers
Type Detecting distance (mm inch)*1

Fiber unit length Minimum Optical axis
Appearance Other power modes Model
(Diameter) bend radius TERA (Longest) diameter
Size / Shape (mm inch) MEGA TURBO Weight
Ambient temperature (mm inch) FINE (Initial) (mm inch)
ULTRA HSPD
SUPER S-HSPD
16.9 0.67"
14.4 2 m 6.6' Free-cut
0.57" R2 3100 122.05" 880 34.65" FU-R77TZ
(ø2.2 ø0.09") 3600 141.73"
R0.08" 2100 82.68" 320 12.60" Approx.
M4 −40 to +60˚C
ToughFlex 640 25.20" 1300 51.18" 190 7.48" 25g
(-40 to +140°F)
Hex-shaped
17.5 0.69"
15 1 m 3.3'
0.59" R10
1800 70.87" 1800 70.87" 880 34.65" FU-R77TG
Cut not allowed
M4 R0.39" 1800 70.87" 320 12.60" Approx.
−40 to +60˚C 640 25.20"
Stainless Steel 1300 51.18" 190 7.48" 43g
(-40 to +140°F)
Transmitter:
ø1
2 m 6.6' Free-cut
R2
3600 141.73" 3600 141.73" 1300 51.18" ø0.04" FU-R77
(ø2.2 ø0.09")
M4 M4 16.5 R0.08" 3000 118.11" 430 16.93" Approx.
−40 to +60˚C 880 34.65"
0.65" ToughFlex 1800 70.87" 240 9.45" Receiver: 21g
14 0.55" (-40 to +140°F)
ø3.2
ø0.13"
2 m 6.6' Free-cut
3600 141.73" 1500 59.06" FU-R7F
(ø2.2 ø0.09") R25 3600 141.73"
Threaded M4 17.5 3200 125.98" 540 21.26" Approx.
−40 to +60˚C R0.98" 1100 43.31"
0.69" 2200 86.61" 290 11.42" 21g
(-40 to +140°F)
15 0.59"
1 m 3.3'
R10 1800 70.87" 1300 51.18" FU-R77G
Cut not allowed 1800 70.87"
M4 24.5 R0.39" 1800 70.87" 430 16.93" Approx.
−40 to +60˚C 880 34.65"
0.96" Stainless Steel 1800 70.87" 240 9.45" 41g
22 0.87" (-40 to +140°F)
*1 When using the FS-N40 Series. “3600 mm 141.73" (1800 mm 70.87")” is assumed as the maximum because the fiber cable length is 2 m 6.6' (1 m 3.3').
Reflective
Threaded and Hex-Shaped Active Receiver Fibers

Fiber unit length Minimum
(Diameter) bend radius TERA (Longest)
Ambient temperature (mm inch) FINE (Initial) ULTRA HSPD
SUPER S-HSPD
2 m 6.6' Free-cut
16.8 0.66" R2
790 31.10" 710 27.95" 310 12.20" FU-R67TZ
(ø2.2 ø0.09" × 2)
R0.08" 550 21.65" 90 3.54" Approx.
−40 to +60˚C 210 8.27" 470 18.50" 56 2.20"
ToughFlex 25g
M6 (-40 to +140°F)
Hex-shaped
18 0.71" 1 m 3.3'
R10
790 31.10" 710 27.95" 310 12.20" FU-R67TG
Cut not allowed
R0.39" 550 21.65" 90 3.54" Approx.
−40 to +60˚C 210 8.27" 470 18.50" 56 2.20"
M6 Stainless Steel 32g
(-40 to +140°F)
2 m 6.6' Free-cut
17 0.67" R2 1100 43.31" 900 35.43" 320 12.60" FU-R67
(ø2.2 ø0.09" × 2)
M6 R0.08" 740 29.13" 110 4.33" Approx.
−40 to +60˚C 210 8.27"
M6 ToughFlex 490 19.29" 65 2.56" 21g
(-40 to +140°F)
2 m 6.6' Free-cut
17 0.67" 1150 45.28" 1100 43.31" 410 16.14" FU-R6F
(ø2.2 ø0.09" × 2) R25
Threaded 860 33.86" 140 5.51" Approx.
−40 to +60˚C R0.98" 300 11.81" 570 22.44" 67 2.64"
M6 21g
(-40 to +140°F)
1 m 3.3'
17 0.67" R10 1100 43.31" 900 35.43" 320 12.60" FU-R67G
Cut not allowed
R0.39" 740 29.13" 110 4.33" Approx.
−40 to +60˚C 210 8.27" 490 19.29" 65 2.56"
M6 Stainless Steel 29g
(-40 to +140°F)
*1 When using the FS-N40 Series. Standard target: White matte paper (Reflective type only).
18
ARMOR GUARDED FIBER UNITS
Thrubeam

ULTRA HSPD
SUPER S-HSPD
M4 1 m 3.3'
15 0.59"
R10 1800 70.87" 1800 70.87" 1400 55.12" FU-77TG
Cut not allowed
R0.39" 1800 70.87" 430 16.93" Approx.
−40 to +50˚C 1100 43.31"
Stainless Steel 1800 70.87" 280 11.02" 43g
(-40 to +122°F)
Lens attachment P25
Hex-shaped
15 1 m 3.3'
0.59" R20 1800 70.87" 1800 70.87" 1400 55.12" FU-77MTG
Cut not allowed
R0.79" 1100 43.31" 1800 70.87" 430 16.93" Approx.
M4 −40 to +50˚C 1800 70.87" 280 11.02"
Stainless Steel 100g
(-40 to +122°F)
Lens attachment P25
ø1.13
M4
ø0.04"
1 m 3.3'
R10 1800 70.87" 1800 70.87" 1400 55.12" FU-77G
Cut not allowed
M4 22 R0.39" 1100 43.31" 1800 70.87" 430 16.93" Approx.
−40 to +50˚C
0.87” Stainless Steel 1800 70.87" 280 11.02" 39g
(-40 to +122°F)
Lens attachment P25
Threaded
1 m 3.3'
R20 1800 70.87" 1800 70.87" 1400 55.12" FU-77MG
Cut not allowed
M4 R0.79" 1100 43.31" 1800 70.87" 430 16.93" Approx.
27 1.06" −40 to +50˚C 1800 70.87" 280 11.02"
Stainless Steel 100g
(-40 to +122°F)
Lens attachment P25
*1 W
hen using the FS-N40 Series. “3600 mm 141.73" (1800 mm 70.87")” is assumed as the maximum because the fiber cable length is 2 m 6.6' (1 m 3.3').
Reflective

Fiber unit length Minimum bend
Detecting (Diameter) radius TERA (Longest)
arrangement Ambient temperature (mm inch) FINE (Initial) ULTRA HSPD
SUPER S-HSPD
18 0.71"
1 m 3.3' Cut not allowed 590 23.23" 540 21.26" 190 7.48" FU-2303
R10
−40 to +50°C 130 5.12" 420 16.54" 47 1.85" Approx.
M3 R0.39"
(-40 to +122°F) 320 12.60" 28 1.10" 20g
Lens attachment P28
M3 Threaded Coaxial
1 m 3.3' Free-cut
18 0.71” (ø1.3 ø0.05" × 2) 590 23.23" 540 21.26" 190 7.48" FU-35FG
spiral 30 cm 11.81" 130 5.12" 420 16.54" 47 1.85" Approx.
M3 −40 to +50˚C 320 12.60" 28 1.10" 15g
(-40 to +122°F)
R10 Lens attachment P28
R0.39"
Stainless Steel
17 0.67”
1 m 3.3' Cut not allowed
900 35.43" 830 32.68" 520 20.47" FU-67TG
−40 to +50˚C 730 28.74" 150 5.91" Approx.
380 14.96" 670 26.38" 89 3.50"
(-40 to +122°F) 32g
M6
Parallel
20.5 0.81"
1 m 3.3' Cut not allowed R25 830 32.68" 520 20.47" FU-67MTG
Hex- 900 35.43"
−40 to +50°C R0.98" 730 28.74" 150 5.91" Approx.
shaped 380 14.96" 670 26.38" 89 3.50"
M6 (-40 to +122°F) Stainless Steel 80g
22.5 0.89" 1 m 3.3' Cut not allowed R10 580 22.83" FU-35TG
530 20.87" 170 6.69"
M6 Coaxial −40 to +50˚C R0.39" 120 4.72" 390 15.35" 45 1.77" Approx.
M6 (-40 to +122°F) Stainless Steel 250 9.84" 27 1.06" 32g
Lens attachment P28
29 1.14" 1 m 3.3' Cut not allowed R25

1100 43.31" 1000 39.37" 500 19.69" FU-67MG
−40 to +50˚C R0.98" 830 32.68" 150 5.91" Approx.
380 14.96" 610 24.02" 88 3.46"
(-40 to +122°F) Stainless Steel 70g
M6
Threaded Parallel
17 0.67” 1 m 3.3' Cut not allowed R10

1100 43.31" 1000 39.37" 500 19.69" FU-67G
−40 to +50˚C R0.39" 830 32.68" 150 5.91" Approx.
(-40 to +122°F) Stainless Steel 380 14.96" 610 24.02" 88 3.46"
M6 29g

*1 When using the FS-N40 Series. Standard target: White matte paper (Reflective type only.)
19
Thrubeam
Threaded and Hex-Shaped Fibers

Fiber unit length Minimum Other power modes Optical axis
Appearance Model
ULTRA HSPD
SUPER S-HSPD
2 m 6.6' Free-cut
14.4 M4 R2 3600 141.73" 3600 141.73" 1400 55.12" FU-77TZ
(ø2.2 ø0.09") ø1.13
0.57" R0.08" 1100 43.31" 3000 118.11" 430 16.93" Approx.
−40 to +50˚C ø0.04"
ToughFlex 1900 74.80" 280 11.02" 25g
(-40 to +122°F) Lens attachment P25
Hex-shaped
2 m 6.6' Free-cut
14.4 R1 FU-70TZ
M4 (ø2.3 ø0.09") 3600 141.73" 3600 141.73" 2500 98.43" ø2.3
0.57" R0.04" 3600 141.73" 1200 47.24" Approx.
−20 to +50˚C 2000 78.74" 3600 141.73" 720 28.35" ø0.09"
ToughFlex 22g
(-4 to +122°F)
R0.5 FU-77V
R0.02" Approx.
2 m 6.6' Free-cut ToughFlex 25g
3600 141.73" 1400 55.12"
(ø2.2 ø0.09") 3600 141.73" ø1.13
M4 M4 14 3000 118.11" 430 16.93"
−40 to +50˚C 1100 43.31" ø0.04"
0.55" 1900 74.80" 280 11.02"
(-40 to +122°F) R2 FU-77
R0.08" Approx.
ToughFlex 21g
Lens attachment P25
Threaded
2 m 6.6' Free-cut 3600 141.73" 3600 141.73" 1900 74.80" FU-7F
(ø2.2 ø0.09") R25
M4 15 1500 59.06" 3600 141.73" 540 21.26" Approx.
−40 to +70˚C R0.98"
0.59" 2600 102.36" 310 12.20" 21g
(-40 to +158°F) Lens attachment P25 ø1
ø0.04"
2 m 6.6' Free-cut
3600 141.73" 2800 110.24" 1000 39.37" FU-78
(ø1.3 ø0.05") R4
M4 15 760 29.92" 2100 82.68" 260 10.24" Approx.
−40 to +70˚C R0.16" 1300 51.18"
0.59" 180 7.09" 9g
(-40 to +158°F) Lens attachment P25
2 m 6.6' Free-cut R2 FU-71Z

(ø2.2 ø0.09") 3600 141.73" 3600 141.73" 2700 106.30"
R0.08" 3600 141.73" 880 34.65" Approx.
ToughFlex 2000 78.74" 3600 141.73" 540 21.26" 25g
FU-71Z:
−40 to +50˚C ø1.5
M6 Threaded M6 16
(-40 to +122°F) ø0.06"
0.63" FU-71
FU-71: R25 3600 141.73" 3600 141.73" 3000 118.11"
−40 to +70˚C 3600 141.73" 1000 39.37" Approx.
R0.98" 2400 94.49" 3600 141.73" 590 23.23"
(-40 to +158°F) 25g
*1 When using the FS-N40 Series. “3600 mm 141.73" (1800 mm 70.87")” is assumed as the maximum because the fiber cable length is 2 m 6.6' (1 m 3.3').
Integrated Bracket Fibers

Beam Optical (Diameter) bend radius diameter
(mm inch) TERA (Longest) Weight
emitting axis Ambient temperature (mm inch) MEGA TURBO (mm inch)
FINE (Initial) ULTRA HSPD
direction height
SUPER S-HSPD
12.2 0.48" FU-L51Z

10 mm
Approx.
0.39"
12.2 17 30g
0.48" 0.67"
2-ø3.4 ø0.13"
17 0.67"
3600 141.73" 2900 114.17" 1000 39.37" FU-L52Z
15 mm ø1.13
Top 2200 86.61" 290 11.42" Approx.
0.59" 790 31.10" 1300 51.18" 170 6.69" ø0.04"
12.2 17 30g
0.48" 0.67"
2-ø3.4 ø0.13"
22 0.87"
2 m 6.6' Free-cut
R2 FU-L53Z
20 mm (ø2.2 ø0.09")
R0.08" Approx.
0.79" −40 to +50˚C
12.2 17 ToughFlex 30g
0.48" 0.67" (-40 to +122°F)
2-ø3.4 ø0.13"
13 0.51" FU-L50Z
Top 10 mm 3600 141.73" 3600 141.73" 3600 141.73" ø3.5
3600 141.73" 2100 82.68" Approx.
(Built-in lens) 0.39" 3600 141.73" 3600 141.73" ø0.14"
14 20 1100 43.31" 30g
0.55" 0.79"
2-ø3.4 ø0.13"
2500 98.43" 840 33.07" FU-L54Z

10 mm 2-ø3.4 2900 114.17" 1800 70.87" ø1.13
Side ø0.13" 12.8 0.50" 270 10.63" Approx.
0.39" 1100 43.31" 140 5.51" ø0.04"
17 680 26.77" 30g
12.8 0.50"
0.67"
*1 When using the FS-N40 Series. “3600 mm 141.73"” is assumed as the maximum because the fiber cable length is 2 m 6.6'.
20
Cylindrical (Set Screw Installation Fibers)

Size (mm inch) MEGA TURBO Weight
ULTRA HSPD
SUPER S-HSPD
ø1 ø0.04"
1 m 3.3' Free-cut R2
700 27.56" 220 8.66" FU-58U
6 0.24" (ø1.0 ø0.04") R0.08" 800 31.50" ø0.5
510 20.08" 64 2.52" Approx.
−40 to +50˚C ToughFlex ø0.02"
170 6.69" 360 14.17" 40 1.57" 4g
(-40 to +122°F) High-flex
ø1.0
ø0.04"
ø1 ø0.04" 50 cm 19.69"
400 15.75" 380 14.96" 120 4.72" FU-58
Cut not allowed R10 ø0.265
6 0.24" 270 10.63" 40 1.57" Approx.
−40 to +50˚C R0.39" 85 3.35" ø0.01"
180 7.09" 23 0.91" 8g
(-40 to +122°F)
ø1.5 ø0.06" 1 m 3.3' Free-cut R2

700 27.56" 220 8.66" FU-59U
10 0.39" (ø1.0 ø0.04") R0.08" 800 31.50" ø0.5
510 20.08" 64 2.52" Approx.
−40 to +50˚C ToughFlex 170 6.69" ø0.02"
360 14.17" 40 1.57" 4g
ø1.5
ø0.06"
ø1.5 ø0.06" 1 m 3.3' Free-cut R4 FU-59
(ø1.0 ø0.04") 1500 59.06" 1200 47.24" 440 17.32" ø0.7
10 0.39" R0.16" 900 35.43" 130 5.12" Approx.
−40 to +70˚C 350 13.78" ø0.03"
High-flex 600 23.62" 77 3.03" 3g
(-40 to +158°F)
ø2.5 ø0.10" 50 cm 19.69" FU-55

Cut not allowed
10 0.39" Approx.
−40 to +70˚C
(-40 to +158°F) 3g
ø2.5 R10 73 2.87" 55 2.17" 21 0.83" ø0.125
41 1.61" 5 0.20"
ø0.10" Do not bend ø2.5 ø0.10" R0.39" 16 0.63" ø0.005"
50 cm 19.69" 27 1.06" 2 0.08"
sleeve. ø0.3 ø0.01" FU-56
10 Cut not allowed
Approx.
5 0.39" −40 to +70˚C
0.20" (-40 to +158°F) 3g
ø3 ø0.12" 2 m 6.6' Free-cut R2 FU-5FZ

(ø2.2 ø0.09") 3600 141.73" 3600 141.73" 1400 55.12" ø1.13
14 0.55" R0.08" 3000 118.11" 430 16.93" Approx.
−40 to +50˚C 1100 43.31" ø0.04"
ToughFlex 1900 74.80" 280 11.02" 19g
(-40 to +122°F)
ø3
ø0.12"
ø3 ø0.12" 2 m 6.6' Free-cut
3600 141.73" 3600 141.73" 1900 74.80" FU-5F
(ø2.2 ø0.09") R25 ø1
3600 141.73" 540 21.26" Approx.
15 0.59" −40 to +70˚C R0.98" 1500 59.06" ø0.04"
2600 102.36" 310 12.20" 19g
(-40 to +158°F)
Focused Beam/High-Power Fibers

Beam (Diameter) bend radius diameter
Aperture (mm inch) TERA (Longest) Weight
emitting Ambient temperature (mm inch) MEGA TURBO (mm inch)
angle FINE (Initial) ULTRA HSPD
direction
SUPER S-HSPD
R2
3600 141.73" 3600 141.73" 3000 118.11" FU-16Z
R0.08" 3600 141.73" 1300 51.18" Approx.
2300 90.55" 3600 141.73" 770 30.31"
ToughFlex 8g
2 m 6.6' Free-cut
Approx.
(ø1.0 ø0.04")
6° ø4
ø0.16" FU-16Z: FU-16
3600 141.73" 3600 141.73"
−40 to +50˚C 3600 141.73" ø2.5
3600 141.73" 1700 66.93" Approx.
(-40 to +122°F) 3500 137.80" 3600 141.73" ø0.10"
1000 39.37" 8g
13 FU-16/18:
0.51"
Side 17 −40 to +70˚C
0.67"
(-40 to +158°F)
3600 141.73" 3600 141.73" 3600 141.73" FU-18
Approx. R10
3600 141.73" 1600 62.99" Approx.
2° R0.39" 2900 114.17" 3600 141.73" 840 33.07" 8g
2 m 6.6' Free-cut
2200 86.61" 900 35.43" FU-18M
Approx. (ø1.0 ø0.04") 3000 118.11" ø1
1.5 1500 59.06" 350 13.78" Approx.
3° −40 to +70˚C ø0.04"
0.06" 610 24.02" 1100 43.31" 230 9.06" 6g
2 20 0.79" (-40 to +158°F)
0.08"
2 m 6.6' Free-cut
R2 3600 141.73" 3600 141.73" 3600 141.73" FU-50
Approx. (ø1.0 ø0.04") ø2.8
Top 4 0.16" R0.08" 3600 141.73" 2900 114.17" Approx.
6° 12 −40 to +50˚C 3600 141.73" 3600 141.73" ø0.11"
ToughFlex 1400 55.12" 8g
0.47" (-40 to +122°F)
3.6 0.14"
21
Thrubeam
Flat Bracket Fibers

Fiber unit length Minimum Other power modes
Optical axis
Appearance Model
Beam emitting (Diameter) bend radius TERA (Longest) diameter
(mm inch) MEGA TURBO Weight
direction Ambient temperature (mm inch) FINE (Initial) (mm inch)
ULTRA HSPD
SUPER S-HSPD
10 0.39"
1 m 3.3' Free-cut
2-ø2.1 ø0.08" 810 31.89" 270 10.63" FU-51TZ
(ø1.0 ø0.04") 950 37.40" ø0.5
570 22.44" 90 3.54" Approx.
10 −40 to +50˚C 220 8.66" ø0.02"
370 14.57" 50 1.97" 5g
0.39" (-40 to +122°F)
Thickness: 3 0.12"
Top
14 0.55"
2-ø3.2 2 m 6.6' Free-cut
ø0.13"
3600 141.73" 3600 141.73" 1400 55.12" FU-52TZ
(ø1.3 ø0.05") ø1
3100 122.05" 420 16.54" Approx.
14 0.55" −40 to +50˚C 1100 43.31" 1900 74.80" 250 9.84" ø0.04"
15g
(-40 to +122°F)
Thickness: 3.5 0.14"
10.5 0.41" 1 m 3.3' Free-cut

2-ø2.1 810 31.89" 270 10.63" FU-57TZ
ø0.08" (ø1.0 ø0.04") 950 37.40"
Side 570 22.44" 90 3.54" Approx.
6 −40 to +50˚C 220 8.66" 370 14.57" 50 1.97"
0.24" 5g
(-40 to +122°F)
R2
Thickness: 2.5 0.10" ø0.5
R0.08"
7 0.28" ø0.02"
ToughFlex
13 2-ø2.1 1 m 3.3' Free-cut
0.51" 740 29.13" 570 22.44" 220 8.66" FU-53TZ
ø0.08" (ø1.0 ø0.04")
400 15.75" 86 3.39" Approx.
−40 to +50˚C 170 6.69" 300 11.81" 39 1.54" 10g
(-40 to +122°F)
Thickness: 2 0.08"
7 0.28"
15 2 m 6.6' Free-cut
0.59" 2-M3 3600 141.73" 3600 141.73" 1300 51.18" FU-54TZ
(ø2.2 ø0.09") ø1
Flat 2700 106.30" 400 15.75" Approx.
−40 to +50˚C 1100 43.31" 1800 70.87" 240 9.45" ø0.04"
25g
(-40 to +122°F)
Thickness: 4 0.16"
12 0.47"
2 m 6.6' Free-cut
8.5 3200 125.98" 1100 43.31" FU-56TZ
0.33" (ø2.2 ø0.09") 3600 141.73" ø1.13
2500 98.43" 400 15.75" Approx.
2-ø2.2 −40 to +50˚C 750 29.53" 1500 59.06" 240 9.45" ø0.04"
ø0.09" 20g
(-40 to +122°F)
*1 When using the FS-N40 Series. “3600 mm 141.73"” is the maximum because the fiber cable length is 2 m 6.6'.
Sleeve Type Fibers

Fiber unit length Minimum bend Optical axis
Beam emitting (Diameter) radius TERA (Longest) diameter
ULTRA HSPD
SUPER S-HSPD
Do not bend sleeve.
ø2.5 ø0.10" 1 m 3.3' Free-cut
ø0.82 ø0.03" 540 21.26" 180 7.09" FU-32
(ø1.3 ø0.05") 690 27.17" ø0.6
420 16.54" 56 2.20" Approx.
−40 to +70˚C 140 5.51" 280 11.02" 32 1.26" ø0.02"
15 0.59" (-40 to +158°F) 5g
15 0.59"
Side
Sleeve R25 mm R0.98" 0.59"
2800 110.24" 2200 86.61" 770 30.31" FU-34
2.56" ø3 (ø2.2 ø0.09") R25
65 1700 66.93" 190 7.48" Approx.
ø0.12" −40 to +70˚C R0.98" 610 24.02"
ø1.2 1100 43.31" 120 4.72" 17g
ø0.05" (-40 to +158°F)
ø1
Sleeve R10 mm R0.39" M4 ø0.04"
2 m 6.6' Free-cut
ø1.65 ø0.06" 15 0.59" 3600 141.73" 3600 141.73" 1800 70.87" FU-73
(ø2.2 ø0.09")
3600 141.73" 540 21.26" Approx.
−40 to +70˚C
67 2.64" 1400 55.12" 2400 94.49" 330 12.99" 24g
(-40 to +158°F)
Do not bend sleeve.

M3 1 m 3.3' Free-cut
ø0.82 ø0.03" 1400 55.12" 1100 43.31" 400 15.75" FU-75F
15 (ø1.0 ø0.04") ø0.5
850 33.46" 120 4.72" Approx.
15 0.59" −40 to +70˚C 310 12.20" ø0.02"
0.59" 570 22.44" 90 3.54" 10g
(-40 to +158°F)
Top
Sleeve R10 mm ø3 ø0.12"
ø0.4 1 m 3.3' Free-cut
R0.39" 370 14.57" 120 4.72" FU-76F
ø0.02" 15 0.59" (ø1.0 ø0.04") R10 390 15.35" ø0.265
260 10.24" 40 1.57" Approx.
−40 to +70˚C R0.39" 85 3.35" ø0.01"
45 1.77" 180 7.09" 20 0.79" 10g
(-40 to +158°F)
Do not bend ø2.5 ø0.10" 50 cm 19.69"

sleeve. ø0.3 ø0.01" 55 2.17" 21 0.83" FU-56
Cut not allowed 73 2.87" ø0.125
10 0.39" 41 1.61" 5 0.20" Approx.
5 0.20" −40 to +70˚C 16 0.63" ø0.005"
27 1.06" 2 0.08" 3g
(-40 to +158°F)
*1 When using the FS-N40 Series. “3600 mm 141.73"” is the maximum because the fiber cable length is 2 m 6.6'.
22
Oil/Chemical Resistant Fibers

ULTRA HSPD
SUPER S-HSPD
2 m 6.6' Free-cut
3600 141.73" 3600 141.73" 3600 141.73" FU-92
(ø2.2 ø0.09") ø3.7
22 0.87"
3600 141.73" 2400 94.49" Approx.
−40 to +70˚C 3600 141.73" 3600 141.73" ø0.15"
1500 59.06" 71g
ø5 ø0.20" (-40 to +158°F)
Top
2 m 6.6' Free-cut
3600 141.73" 3600 141.73" 3600 141.73" FU-98
(ø2.2 ø0.09") R40 ø6
36.5 1.44" 3600 141.73" 3600 141.73" Approx.
−40 to +70˚C R1.57" 3600 141.73" ø0.24"
ø6.5 ø0.26" 3600 141.73" 1900 74.80" 70g
(-40 to +158°F)
2 m 6.6' Free-cut
3600 141.73" 3600 141.73" 3100 122.05" FU-96
(ø2.2 ø0.09") ø2.8
3600 141.73" 860 33.86" Approx.
ø5 −40 to +70˚C 2000 78.74" ø0.11"
ø0.20" 23 0.91" 3600 141.73" 570 22.44" 71g
(-40 to +158°F)
Side
2 m 6.6' Free-cut
3600 141.73" 3600 141.73" 3600 141.73" FU-96T
13 (ø2.2 ø0.09") R25*2 ø3.7
Thickness: 7 3600 141.73" 3600 141.73" Approx.
0.51" 0 to +60˚C R0.98" 3600 141.73" ø0.15"
0.28" 3600 141.73" 2400 94.49" 35g
14.3 0.56" (0 to +140°F)
M4
14.6 2 m 6.6' Free-cut
0.57" 3600 141.73" 3600 141.73" 2500 98.43" FU-80TZ
(ø2.2 ø0.09") ø2.3
3600 141.73" 1000 39.37" Approx.
−20 to +100˚C 2000 78.74" ø0.09"
3500 137.80" 790 31.10" 30g
(-4 to +212°F) R2
Side
R0.08"
(oil resistant) 17 M8
2 m 6.6' Free-cut ToughFlex
0.67"
3600 141.73" 3600 141.73" 3600 141.73" FU-80MTZ
(ø2.2 ø0.09") ø4.3
3600 141.73" 3600 141.73" Approx.
−20 to +100˚C 3600 141.73" 3600 141.73" ø0.17"
2900 114.17" 55g
(-4 to +212°F)
*2 Fibers cannot be bent within 25 mm 0.98" of the end of the case screw cap.
High-Flex Fibers (Repeated Bending Fibers)

ULTRA HSPD
SUPER S-HSPD
ø1 ø0.04" 1 m 3.3' Free-cut

FU-58U
ø1.0 6 0.24" (ø1.0 ø0.04")
Approx.
ø0.04" −40 to +50˚C
4g
(-40 to +122°F)
ø1.5 ø0.06" 1 m 3.3' Free-cut

800 31.50" 700 27.56" 220 8.66" FU-59U
ø1.5 10 0.39" (ø1.0 ø0.04") ø0.5
510 20.08" 64 2.52" Approx.
ø0.06" −40 to +50˚C 170 6.69" ø0.02"
R2 360 14.17" 40 1.57" 4g
(-40 to +122°F)
R0.08"
M3 ToughFlex
1 m 3.3' Free-cut
High-flex FU-79U
(ø1.0 ø0.04")
M3 10 0.39" Approx.
−40 to +50˚C
4g
(-40 to +122°F)
M4 1 m 3.3' Free-cut
1800 70.87" 1800 70.87" 1400 55.12" FU-70U
(ø1.0 ø0.04") ø2.3
13 1800 70.87" 420 16.54" Approx.
0.51" −40 to +50˚C 1200 47.24" 1800 70.87" 240 9.45" ø0.09"
5g
(-40 to +122°F)
M4
Built-in lens 14.4
0.57" M4 2 m 6.6' Free-cut R1
3600 141.73" 3600 141.73" 1400 55.12" FU-70TU
(ø1.0 ø0.04") R0.04" ø2.3
3500 137.80" 410 16.14" Approx.
−20 to +50˚C ToughFlex 1200 47.24" ø0.09"
2100 82.68" 210 8.27" 8g
ø1.5 ø0.06" 1 m 3.3' Free-cut

FU-59
ø1.5 10 (ø1.0 ø0.04")
Approx.
ø0.06" 0.39" −40 to +70˚C
3g
(-40 to +158°F) 1200 47.24" 440 17.32"
1500 59.06"
900 35.43" 130 5.12"
1 m 3.3' Free-cut 350 13.78" 600 23.62" 77 3.03"
R4 FU-79
(ø1.0 ø0.04") ø0.7
M3 10 R0.16" Approx.
0.39" −40 to +70˚C ø0.03"
High-flex 6g
M3 (-40 to +158°F)
1 m 3.3' Free-cut
1000 39.37" 820 32.28" 300 11.81" FU-57TE
6 × 10.5 × 2.5 (ø1.0 ø0.04")
610 24.02" 90 3.54" Approx.
0.24" × 0.41" × 0.10" −40 to +70˚C 200 7.87" 410 16.14" 58 2.28" 5g
6 0.24" (-40 to +158°F)
10.5 0.41"
*1 W
hen using the FS-N40 Series. “3600 mm 141.73" (1800 mm 70.87")” is assumed as the maximum because the fiber cable length is 2 m 6.6' (1 m 3.3').
23
Thrubeam
Heat Resistant Fibers

Heat resistant (Diameter) bend radius TERA (Longest) diameter
temperatures*2 Ambient temperature (mm inch) FINE (Initial) (mm inch)
ULTRA HSPD
SUPER S-HSPD
2 m 6.6' Free-cut
R5 3600 141.73" 3600 141.73" 1500 59.06" FU-86Z
100˚C *3 (ø2.2 ø0.09")
R0.20" 1200 47.24" 3600 141.73" 460 18.11" Approx.
(212°F) 15 0.59" −40 to +100˚C
ToughFlex 2100 82.68" 280 11.02" 25g
M4 (-40 to +212°F) Lens attachment P25 ø1
ø0.04"
2 m 6.6' Free-cut
3600 141.73" 3600 141.73" 1900 74.80" FU-86A
105˚C *3 (ø2.2 ø0.09") R25
1400 55.12" 3600 141.73" 540 21.26" Approx.
(221°F) 15 0.59" −40 to +105˚C R0.98" 2600 102.36" 320 12.60" 22g
M4 (-40 to +221°F) Lens attachment P25
2 m 6.6' Free-cut
3200 125.98" 860 33.86" FU-86H
150˚C *4 (ø2.2 ø0.09") R20 3600 141.73"
2100 82.68" 400 15.75" Approx.
(302°F) 17 0.67" −40 to +150˚C R0.79" 620 24.41" 1300 51.18" 230 9.06" 35g
M4 (-40 to +302°F)
ø1.5
ø0.06"
2 m 6.6' Free-cut
3600 141.73" 3200 125.98" 940 37.01" FU-88
180˚C *5 (ø2.2 ø0.09") R35
2200 86.61" 450 17.72" Approx.
(356°F) 17 0.67" −60 to +180˚C R1.38" 680 26.77" 1400 55.12" 260 10.24" 36g
M4 (-76 to +356°F)
2m 6.6'
Cut not allowed
FU-88K
200˚C 10 R8
Approx.
(392°F) 15 0.39" −40 to +200˚C R0.31"
0.59" 30g
M4 (-40 to +392°F) 2100 82.68" 810 31.89"
2900 114.17" ø1
1500 59.06" 300 11.81"
460 18.11" ø0.04"
2m 6.6' 1100 43.31" 170 6.69"
Cut not allowed
FU-84C
300˚C 10 R25
Approx.
(572°F) 15 0.39" −40 to +300˚C R0.98"
0.59" 66g
M4 (-40 to +572°F) Lens attachment P25
*2 Use the fiber sensor under dry conditions. Allow some margin for the temperature upper limit when selecting a heat-resistant fiber unit.
*3 The recommended maximum ambient temperature during operation is 90°C (194°F) when constantly using the fiber unit in a high-temperature environment.
Area/Array Fibers

Optical (Diameter) bend radius diameter
Detecting (mm inch) TERA (Longest) Weight
axis Ambient temperature (mm inch) MEGA TURBO (mm inch)
method FINE (Initial) ULTRA HSPD
width
SUPER S-HSPD
15 0.59"
2 m 6.6' Free-cut
Approx. FU-A05
5 mm (ø2.2 ø0.09")
15 6 × 0.3 Approx.
0.20" 0.59" Thickness: –40 to +70˚C
4.0 0.16" 0.24" × 0.01" 20g
(-40 to +158°F)
R4*2 3600 141.73" 3600 141.73" 910 35.83"
2300 90.55" 340 13.39"
20 0.79" R0.16" 810 31.89"
2 m 6.6' Free-cut 1400 55.12" 200 7.87"
Approx. FU-A10
10 mm 20 (ø2.2 ø0.09")
11 × 0.3 Approx.
0.39" 0.79" Thickness: −40 to +70˚C
4.0 0.16" 0.43" × 0.01" 20g
(-40 to +158°F)
Array
2 m 6.6' Free-cut
60 2.36"
(not including the 3600 141.73" 3600 141.73" 1500 59.06" Approx. FU-A40
40 mm
17 0.67" 50 mm 1.97" spiral section) 3200 125.98" 610 24.02" 40 × 0.25 Approx.
1.57" 1100 43.31"
–20 to +50˚C 2100 82.68" 350 13.78" 1.57" × 0.01" 70g
Thickness: 5 0.20" (-4 to +122°F) R10
120 4.72" 2 m 6.6' Free-cut R0.39"
(not including the 3600 141.73" 3600 141.73" 1400 55.12" Approx. FU-A100
100 mm
50 mm 1.97" spiral section) 3200 125.98" 540 21.26" 100 × 0.25 Approx.
3.94" 17 0.67" 1000 39.37"
–20 to +50˚C 2000 78.74" 310 12.20" 3.94" × 0.01" 110g
Thickness: 5 0.20" (-4 to +122°F)
20 0.79"
2 m 6.6' Free-cut
3600 141.73" 3600 141.73" 2800 110.24" 10 × 3 FU-12
10 mm 20 0.79" (ø2.2 ø0.09")
3600 141.73" 1000 39.37" 0.39" × 0.12" Approx.
0.39" −40 to +50˚C 2500 98.43"
3600 141.73" 580 22.83" (With 1.0 mm 0.04" wide slit) 23g
(-40 to +122°F)
29.8 1.17" 11 × 2
2 m 6.6' Free-cut
R2 3600 141.73" 3600 141.73" 3600 141.73" 0.43" × 0.08" FU-E11
11 mm 10.5 (ø2.2 ø0.09")
Area R0.08" 3600 141.73" 2200 86.61" (With 0.5 mm / 1.0 mm Approx.
0.43" 0.41" −40 to +50˚C 3600 141.73"
ToughFlex 3600 141.73" 1200 47.24" 0.02"/0.04" 20g
Thickness: 4.0 0.16" (-40 to +122°F)
wide slit)
69 2.72" 40 × 3
2 m 6.6' Free-cut 3600 141.73"
3600 141.73" 3600 141.73" 1.57" × 0.12" FU-E40
40 mm 19.5 (ø2.2 ø0.09")
0.77"
3600 141.73" 3600 141.73" 3600 141.73" (0.5 × 20 mm 0.02" × 0.79" / Approx.
1.57" −40 to +50˚C 3600 141.73" 3600 141.73" 0.5 × 30 mm 0.02" × 1.18" 30g
(-40 to +122°F) Slit attachment P25
Thickness: 5.1 0.20" slit options available)
*2 R10 R0.39" for the first 10 mm 0.39" of cable from the housing.
24
Detecting Distances Using Thrubeam Lenses
Detecting distance (mm inch)*1

Model Applicable
Type Appearance (mm inch) Ambient temperature
Weight fiber units
TERA MEGA ULTRA SUPER TURBO FINE HSPD S-HSPD
FU-77TZ/ 3600 2700 1700

Tip: ø4.3 ø0.17" 77V/77 141.73" 106.30" 66.93"
Ultra-long
detecting 3600 3200 2000
FU-7F
distance F-4 141.73" 125.98" 78.74"
−40 to +70˚C
Approx.
(-40 to +158°F)
Aperture 1g 3600 2500 1400
Angle: 9.5 0.37" FU-78
141.73" 98.43" 55.12"
Approx. 8°
FU-77G/77TG/ 1800 1700
77MG/77MTG 70.87" 66.93"
FU-77TZ/77V/ 3600 2100 1100

77/84C/88K 141.73" 82.68" 43.31"
Tip: ø4 ø0.16" 3600 2500 1400

FU-7F/86A
Long-detecting 141.73" 98.43" 55.12"
distance
F-2
−40 to +300˚C 3600 1900 1000
Approx. FU-86Z
Aperture (-40 to +572°F) 141.73" 74.80" 39.37"
2g
Angle:
Approx. 15° 7.9 0.31" 3600 1600 900
FU-78
141.73" 62.99" 35.43"
FU-77G/77TG/ 1800 1100

77MG/77MTG 70.87" 43.31"
3600 2600 1600

FU-77V/77
141.73" 102.36" 62.99"
Fixing Nut
3600 3100 1900
FU-7F/86A
141.73" 122.05" 74.80"
F-5
Side-view with −40 to +105˚C 3600 2900 1800
5.6 Approx. FU-86Z
mounting holes 9.3 (-40 to +221°F) 141.73" 114.17" 70.87"
0.22" 10g
0.37" 16.7
0.66"
3600 2300 1300
FU-78
141.73" 90.55" 51.18"
1800 1600
FU-77G/77MG
70.87" 62.99"
3600 3200 2200 1600 530 300

FU-77V/77
141.73" 125.98" 86.61" 62.99" 20.87" 11.81"
Tip: ø4 ø0.16"
1800 1600 530 300
FU-77G/77MG
70.87" 62.99" 20.87" 11.81"
F-1
−40 to +70˚C*2 3600 2700 2300 630 370
Side-view Approx. FU-7F/86A
(-40 to +158°F) 141.73" 106.30" 90.55" 24.80" 14.57"
2g
9.5 0.37"
3600 2400 2000 590 350
FU-86Z
141.73" 94.49" 78.74" 23.23" 13.78"
3600 3000 1900 1300 960 360 200

FU-78/84C/88K
141.73" 118.11" 74.80" 51.18" 37.80" 14.17" 7.87"
* 1 The maximum sensing distance of 3600 mm 141.73" (1800 mm 70.87") is possible because the fiber length on one side is 2 m 6.6' (1 m 3.3').
*2 When using the F-1 at a temperature of 70°C (158°F) or more, specify the “Heat-resistant F-1”.
Slit For FU-E40 (Sold Separately)
Slit Type With OP-84365 attached With OP-84366 attached OP-84365 OP-84366
Optical Axis Size 30 × 0.5 mm 1.18" × 0.02" 20 × 0.5 mm 0.79" × 0.02"
TERA 3600 141.73" 3600 141.73"
MEGA 3600 141.73" 3600 141.73"
ULTRA 3500 137.80" 2300 90.55"
Detecting distance for
SUPER 1500 59.06" 930 36.61"
each power mode
TURBO 760 29.92" 510 20.08"
(mm inch)*1
FINE 460 18.11" 330 12.99"
HSPD 160 6.30" 110 4.33"
S-HSPD 80 3.15" 56 2.20"
Slit weight (transmitter/receiver set) Approx. 4g
*1 W
hen using the FS-N40 Series. “3600 mm 141.73"” is assumed as the maximum because the
fiber cable length is 2 m 6.6'.
25
Reflective
Threaded and Hex-Shaped Fibers

Fiber unit length Minimum bend
Detecting (Diameter) radius TERA (Longest)
arrangement Ambient temperature (mm inch) FINE (Initial) ULTRA HSPD
SUPER S-HSPD
18.5 1 m 3.3' Free-cut

0.73" 580 22.83" 530 20.87" 170 6.69" FU-35TZ
Hex- (ø1.3 ø0.05" × 2)
390 15.35" 45 1.77" Approx.
shaped −40 to +50˚C 120 4.72"
M3 250 9.84" 27 1.06" 7g
(-40 to +122°F) R2 Lens attachment P28
R0.08"
17 0.67" 590 23.23" 540 21.26" 190 7.48" FU-35FZ
(ø1.3 ø0.05" × 2)
420 16.54" 47 1.85" Approx.
M3 −40 to +50˚C 130 5.12"
320 12.60" 28 1.10" 6g
(-40 to +122°F)
Lens attachment P28
1 m 3.3' Free-cut
23 0.91" 1000 39.37" 780 30.71" 270 10.63" FU-35FA
(ø1.3 ø0.05" × 2)
M3 Coaxial 200 7.87" 600 23.62" 76 2.99" Approx.
−40 to +70˚C 420 16.54" 49 1.93"
M3 6g
(-40 to +158°F)
R25
Lens attachment P28
Threaded
R0.98"
50 cm 19.69" 300 11.81" 220 8.66" 68 2.68" FU-21X
Cut not allowed 150 5.91" 23 0.91" Approx.
63 2.48"
91 3.58" 15 0.59" 4g
15 0.59" FU-21X : Lens attachment P28
−40 to +70˚C
M3 (-40 to +158°F)
FU-24X : 230 9.06" 170 6.69" 29 1.14" FU-24X
R10
−40 to +50˚C 24 0.94" 120 4.72" 13 0.51" Approx.
R0.39" 54 2.13" 7 0.28"
(-40 to +122°F) 4g
Lens attachment P28
2 m 6.6' Free-cut
750 29.53" 370 14.57" FU-66TZ
Hex- 13.5 0.53" (ø1.3 ø0.05" × 2) 800 31.50"
660 25.98" 100 3.94" Approx.
shaped −40 to +50˚C 250 9.84" 460 18.11" 60 2.36" 10g
(-40 to +122°F) R2
M4
R0.08"
ToughFlex
2 m 6.6' Free-cut FU-66Z
1200 47.24" 1000 39.37" 430 16.93"
M4 (ø1.3 ø0.05" × 2) 750 29.53" 110 4.33" Approx.
340 13.39" 550 21.65" 66 2.60" 10g
15 0.59" FU-66Z :
Threaded Parallel −40 to +50˚C
M4 (-40 to +122°F)
FU-66 : 1100 43.31" 550 21.65" FU-66
R25 1400 55.12"
−40 to +70˚C 900 35.43" 200 7.87" Approx.
R0.98" 470 18.50" 690 27.17" 120 4.72"
(-40 to +158°F) 10g
2 m 6.6' Free-cut
R2 830 32.68" 520 20.47" FU-67TZ
Hex- 15.8 0.62" (ø2.2 ø0.09" × 2) 900 35.43"
R0.08" 730 28.74" 150 5.91" Approx.
shaped −40 to +50˚C 380 14.96" 670 26.38" 89 3.50"
ToughFlex 25g
(-40 to +122°F)
M6
16 0.63" 2 m 6.6' Free-cut

R0.5 1000 39.37" 500 19.69" FU-67V
(ø2.2 ø0.09" × 2) 1100 43.31"
R0.02" 830 32.68" 150 5.91" Approx.
−40 to +50˚C 380 14.96"
M6 ToughFlex 610 24.02" 88 3.46" 25g
(-40 to +122°F)
17 0.67" 2 m 6.6' Free-cut

FU-61Z
(ø2.2 ø0.09" × 2) 1500 59.06" 1300 51.18" 640 25.20"
1100 43.31" 230 9.06" Approx.
−40 to +50˚C 550 21.65" 780 30.71" 140 5.51"
M6 22g
(-40 to +122°F) R2
R0.08"
16 0.63" FU-67
1000 39.37" 500 19.69"
(ø2.2 ø0.09" × 2) 1100 43.31"
M6 Parallel 830 32.68" 150 5.91" Approx.
−40 to +50˚C 380 14.96" 610 24.02" 88 3.46"
M6 21g
(-40 to +122°F)
Threaded
17 0.67" 2 m 6.6' Free-cut

2400 94.49" 2200 86.61" 680 26.77" FU-61
(ø2.2 ø0.09" × 2)
1300 51.18" 270 10.63" Approx.
−40 to +70˚C 600 23.62"
M6 1000 39.37" 180 7.09" 21g
(-40 to +158°F)
17 0.67" 2 m 6.6' Free-cut

1400 55.12" 1200 47.24" 550 21.65" FU-6F
(ø2.2 ø0.09" × 2) R25
1000 39.37" 220 8.66" Approx.
M6 −40 to +70˚C R0.98" 480 18.90" 780 30.71" 130 5.12" 21g
(-40 to +158°F)
17 0.67" 2 m 6.6'Free-cut
780 30.71" 450 17.72" FU-25
(ø2.2 ø0.09" × 2) 790 31.10"
Coaxial 750 29.53" 210 8.27" Approx.
−40 to +70˚C 290 11.42" 680 26.77" 120 4.72"
M6 18g
(-40 to +158°F)

26
Cylindrical (Set Screw Installation Fibers)

SUPER S-HSPD
15 0.59" 1 m 3.3' Cut not allowed R4 250 9.84" 91 3.58" FU-49X

280 11.02"
−40 to +70˚C R0.16" 170 6.69" 25 0.98" Approx.
ø1.5 ø0.06" 59 2.32" 130 5.12" 14 0.55"
(-40 to +158°F) High-flex 3g
ø1.5
ø0.06" 15
Sleeve 3 0.59"
section 0.12"
1 m 3.3' Cut not allowed 46 1.81" 14 0.55" FU-46
R10 64 2.52"
cannot ø1.5 ø0.06" −40 to +70˚C 30 1.18" 3 0.12" Approx.
be bent ø0.5 ø0.02" R0.39" 8 0.31"
(-40 to +158°F) 22 0.87" 1 0.04" 2g
10 1 m 3.3' Free-cut R2
0.39" 220 8.66" 80 3.15" FU-49U
ø2 (ø1.0 ø0.04" × 2) R0.08" 290 11.42"
180 7.09" 21 0.83" Approx.
ø0.08" −40 to +50˚C ToughFlex 59 2.32"
ø2 ø0.08" 110 4.33" 12 0.47" 4g
Sleeve 14
section 6 0.55" 50 cm 19.69" Cut not allowed
160 6.30" 120 4.72" 54 2.13" FU-22X
ø2.5 cannot 0.24" R25
−40 to +70˚C 100 3.94" 20 0.79" Approx.
ø0.10" be bent ø2.5 ø0.10" R0.98" 42 1.65"
(-40 to +158°F) 76 2.99" 11 0.43" 4g
ø1.77 ø0.07"
2 m 6.6' Free-cut
(ø1.3 ø0.05" × 2) R2 1000 39.37" 430 16.93" FU-4FZ
1200 47.24"
R0.08" 750 29.53" 110 4.33" Approx.
17 0.67" ToughFlex 340 13.39" 550 21.65" 66 2.60" 8g
FU-4FZ:
−40 to +50˚C
ø3 ø0.12" (-40 to +122°F)
FU-4F: 1400 55.12" 1100 43.31" 550 21.65" FU-4F
R25
900 35.43" 200 7.87" Approx.
−40 to +70˚C R0.98" 470 18.50" 690 27.17" 120 4.72" 8g
(-40 to +158°F)
10 0.39" 290 11.42" 220 8.66" 80 3.15" FU-48U
(ø1.0 ø0.04" × 2) R0.08"
180 7.09" 21 0.83" Approx.
−40 to +50˚C ToughFlex 59 2.32" 110 4.33" 12 0.47"
ø3 ø0.12" 4g
ø3 (-40 to +122°F) High-flex
ø0.12"
15 0.59" 2 m 6.6' Free-cut
R4
500 19.69" 350 13.78" 120 4.72" FU-48
(ø1.0 ø0.04" × 2)
R0.16" 270 10.63" 32 1.26" Approx.
ø3 ø0.12" −40 to +70˚C 90 3.54" 190 7.48" 18 0.71"
High-flex 7g
(-40 to +158°F)
17 0.67" 50 cm 19.69" Cut not allowed FU-23X

850 33.46" 830 32.68" 540 21.26"
R25
−40 to +70˚C 730 28.74" 220 8.66" Approx.
ø3 ø0.12" R0.98" 330 12.99" 660 25.98" 180 7.09"
(-40 to +158°F) 4g
Sleeve 15
section 5 0.59" 50 cm 19.69" Cut not allowed
120 4.72" 100 3.94" 46 1.81" FU-45X
R4
cannot 0.20" −40 to +70˚C 83 3.27" 11 0.43" Approx.
be bent ø3 ø0.12" R0.16" 33 1.30" 68 2.68" 6 0.24"
(-40 to +158°F) 4g
ø0.82 ø0.03"

Integrated Bracket Fibers

Optical (Diameter) bend radius
Beam emitting (mm inch) TERA (Longest) Weight
axis Ambient temperature (mm inch) MEGA TURBO
direction FINE (Initial) ULTRA HSPD
height
SUPER S-HSPD
2 m 6.6' Free-cut
10 R2 1000 39.37" 470 18.50" FU-L41Z
13 0.51" (ø2.2 ø0.09") 1200 47.24"
Top mm 2-ø3.4 R0.08" 780 30.71" 150 5.91" Approx.
ø0.13" −40 to +50˚C 310 12.20"
0.39" ToughFlex 580 22.83" 90 3.54" 25g
14 0.55" 17 0.67" (-40 to +122°F)
27
Reflective
Focused Beam/High-Power Fibers

Appearance Model
Beam emitting Aperture (Diameter) bend radius TERA (Longest)
direction angle Ambient temperature (mm inch) FINE (Initial) ULTRA HSPD
SUPER S-HSPD
Thickness: 2 m 6.6' Free-cut
5.2 0.20" R2 FU-40
(ø2.2 ø0.09" × 2) 30 to 2400 30 to 690
R0.08" Approx.
−40 to +50˚C 1.18" to 94.49" 1.18" to 27.17"
21 0.83" ToughFlex 23g
Approx. (-40 to +122°F) 30 to 2700 1.18" to 106.30" 30 to 2100 30 to 270
Top
8° Thickness: 1 m 3.3' 30 to 530 1.18" to 20.87" 1.18" to 82.68" 1.18" to 10.63"
5.2 0.20" R10 30 to 1200 30 to 220 FU-40G
Cut not allowed
R0.39" 1.18" to 47.24" 1.18" to 8.66" Approx.
−40 to +50˚C
21 0.83" Stainless Steel 50g
(-40 to +122°F)
Small Spot Reflective Fibers
Lens Attachment (Small Spot) + Fiber Unit
Lens Attachment Fiber Unit

Beam spot Focal
Type diameter distance Appearance Ambient Minimum bend
(mm inch) (mm inch) temperature Model Appearance Model
(mm inch) Weight radius (mm inch)
Approx.
R10
ø0.1 FU-24X
R0.39"
ø0.004"
Approx.
R25
ø0.2 FU-21X
R0.98"
ø0.01"
R2
R0.08" FU-35FZ
ToughFlex
Tip: ø4.3 ø0.17"
−30 to +70˚C R10
7±2 FU-35FG/
(-22 to +158°F) F-2HA R0.39"
0.28"±0.08" 15.6 0.61" 2303
Approx. 1g Stainless Steel
Approx.
R25
ø0.4 FU-35FA
R0.98"
ø0.02"
R2
R0.08" FU-35TZ
ToughFlex
R10
R0.39" FU-35TG
Stainless Steel
R2
R0.08" FU-35FZ
ToughFlex
R10
FU-35FG/
Small Spot R0.39"
2303
Tip: ø7.4 ø0.29" Stainless Steel
Approx. −30 to +70˚C R2

15±2
ø0.5 (-22 to +158°F) F-4HA R0.08" FU-35TZ
0.59"±0.08"
ø0.02" 27 1.06" Approx. 2g ToughFlex
R10
R0.39" FU-35TG
Stainless Steel
R25
FU-35FA
R0.98"
Approx.
R25
ø1.0 FU-21X
R0.98"
ø0.04"
R2
R0.08" FU-35FZ
Tip: ø10.6 ø0.42" ToughFlex
−40 to +70˚C R10

35±3 FU-35FG/
(-40 to +158°F) F-6HA R0.39"
Approx.
1.38"±0.12" 26 1.02" 2303
Approx. 5g Stainless Steel
ø2.0
ø0.08" R2
R0.08" FU-35TZ
ToughFlex
R25
FU-35FA
R0.98"
28
Lens Attachment (Parallel Beam) + Fiber Unit
Lens Attachment Fiber Unit Detecting distance (mm inch)*1

Beam spot Other power modes
Ambient Minimum TERA
Type diameter Appearance (Longest)
temperature Model Appearance bend radius Model MEGA TURBO
(mm inch) (mm inch) FINE ULTRA HSPD
Weight (mm inch) (Initial) SUPER S-HSPD
R2
R0.08" FU-35FZ
ToughFlex 76 2.99" 76 2.99" 68 2.68"
76 2.99" 32 1.26"
R10 66 2.60"
76 2.99" 25 0.98"
Tip: ø4.3 ø0.17" R0.39" FU-35FG/
Approx. ø4 Stainless 2303
ø0.16" Steel
(within the 9.5 −30 to +70˚C 100 3.94" 100 3.94"
R25 100 3.94"
Parallel Beam Spot detecting 0.37" (-22 to +158°F) F-3HA FU-35FA 100 3.94" 76 2.99"
R0.98" 95 3.74"
range of Approx. 2g 100 3.94" 70 2.76"
0 to 20 mm
0 to 0.79") R2
R0.08" FU-35TZ
ToughFlex 68 2.68" 68 2.68" 54 2.13"
68 2.68" 39 1.54"
R10 50 1.97"
68 2.68" 30 1.18"
R0.39"
FU-35TG
Stainless
Steel
Lens Attachment (Variable Beam Spot Sizes) FU-10 F-5HA+FU-35FZ

Adjustable range of spot diameter Target width vs. operating range
Beam Lens Attachment (Typical) Fiber Unit (Typical)
Focal 4 35
spot Ambient Minimum
Spot diameter (mm inch)
Detecting distance (mm inch)

0.16" 1.38"
Type distance Appearance 3.5
diameter temperature Model Appearance
0.14" bend radius Model 30 Insertion depth 9.4 mm 0.37"
(mm inch) (mm inch) 1.18"
(mm inch) Weight 3 (mm inch) 25
Insertion depth 8.4 mm 0.33"
0.12"
0.98" Insertion depth 7 mm 0.28"
2.5
0.10" 20
2 R2 0.79"
0.08"
1.5
R0.08" FU-35FZ 15
0.59"
0.06" ToughFlex 10
8.7 1 Adjustable 0.39"
0.04"
0.34" −30 to +70˚C 0.5 range 5
ø0.5 to 3 8 to 30 R10 0.20"
Side-view 5.6 (-22 to 0.02"
FU-35FG/
ø0.02" 0.31" 0.22" F-5HA 0 R0.39"
adjustable spot +158°F) 0 10 20 30230340
0
0.5 1 1.5 2 3 5
to ø0.12" to ø1.18" 0.39" Stainless
0.79" Steel1.18" 1.57" 0.02" 0.04" 0.06" 0.08" 0.12" 0.20"
15 0.59" Approx. 2g
Distance (mm inch) Beam spot diameter ø (mm inch)
R25
FU-35FA
R0.98"
Built-In Lens Variable Beam Spot FU-10 F-5HA+FU

Adjustable range of spot diameter Target width vs.
Beam spot Fiber unit length Minimum (Typical) (Typical)
Focal distance Appearance Model 4 35
Type diameter (Diameter) bend radius
Spot diameter (mm inch)
Detecting distance (mm inch)

(mm inch) (mm inch) Weight 0.16" 1.38"
(mm inch) Ambient temperature (mm inch) 3.5 30 Insertio
0.14" 1.18"
3 Insertio
0.12" 25
2 m 6.6' Free-cut 0.98" Insertio
M6 FU-10 2.5
0.10" 20
(ø1.3 ø0.05" × 2) R25 0.79"
Approx. 2
-40 to +70°C R0.98" 0.08" 15
26.4 to 31.5 5g 1.5 0.59"
ø0.9 to 3.5 10 to 30 (-40 to +158°F) 0.06"
Adjustable 1.04" to 1.24" 1 Adjustable 10
ø0.04" 0.39" 0.04" 0.39"
beam spot M6 range 5
to ø0.14" to 1.18" 2 m 6.6' 0.5
FU-2540 0.02" 0.20"
Cut not allowed R25 0
Approx. 40
0
0.5 1
-40 to +70°C R0.98" 0 10 20 30
1.57" 0.02" 0.04
30g 0.39" 0.79" 1.18"
26.4 to 31.5 (-40 to +158°F)
1.04" to 1.24" Distance (mm inch) Beam spot d
Ultra-Small Beam Spot
Beam spot Fiber unit length Minimum

Focal distance Appearance Model
Type diameter (Diameter) bend radius
(mm inch) (mm inch) Weight
(mm inch) Ambient temperature (mm inch)
50 cm 19.69"
Approx. Tip: ø3 ø0.12" FU-20
Cut not allowed R25
Small Spot ø0.1 5 0.20" Approx.
−40 to +70˚C R0.98"
ø0.004" 2g
18 0.71" (-40 to +158°F)
* Cannot be used with the FS-N40 Series in S-HSPD/HSPD mode.
29
Reflective
Definite-Reflective Fibers
Fiber unit length Minimum Beam spot
ULTRA HSPD
SUPER S-HSPD
2 m 6.6' Free-cut
15 to 110 0.59" to 4.33" 15 to 64 0.59" to 2.52" FU-40S
7.4 (ø2.2 ø0.09" × 2) R25 15 to 150 0.59" to 5.91" 15 to 100 0.59" to 3.94"
Top 0.29" 15 to 39 0.59" to 1.54" — Approx.
19 0.75"
-40 to +70°C R0.98" 15 to 55 0.59" to 2.17" 15 to 76 0.59" to 2.99" 15 to 27 0.59" to 1.06" 25g
17 0.67" (-40 to +158°F)
Thickness: 5 0.20" 3 0.12" center of 3 0.12" center of
14.4 0.57" 2 m 6.6' Free-cut detecting distance detecting distance Approx. 4.5 0.18"
3 0.12" center of FU-37
(ø1.0 ø0.04" × 2) detecting distance 3 0.12" center of 3 0.12" center of Approx.
Side
-40 to +70°C 3 0.12" center of detecting distance detecting distance 3.5 0.14" Approx.
detecting distance 3 0.12" center of 3 0.12" center of (At distance of 3 0.12") 6g
19 0.75" (-40 to +158°F) detecting distance detecting distance
Thickness: 4 0.16" 6 0.24" center of 6 0.24" center of
12 0.47" 2 m 6.6' Free-cut detecting distance detecting distance
R10 6 0.24" center of FU-38
(ø1.0 ø0.04" × 2) detecting distance 6 0.24" center of 6 0.24" center of Approx. ø1.5 ø0.06"
R0.39" detecting distance detecting distance Approx.
-40 to +70°C 6 0.24" center of (At distance of 6 0.24")
detecting distance 6 0.24" center of 6 0.24" center of 5g
19 0.75" (-40 to +158°F)
detecting distance detecting distance
Thickness: 4.3 0.17" 2 m 6.6' Free-cut
12 0.47" FU-38V
0 to 4 0" to 0.16" 0 to 4 0" to 0.16" 0 to 4 0" to 0.16"
(ø1.0 ø0.04" × 2)
0 to 4 0" to 0.16" 0 to 4 0" to 0.16" — Approx.
-40 to +70°C 0 to 4 0" to 0.16" 0 to 4 0" to 0.16" 0 to 4 0" to 0.16" 5g
19 0.75" (-40 to +158°F)
Thickness: 5.2 0.20" 14 0.55" 2 m 6.6' Free-cut
8 to 64 0.31" to 2.52" 8 to 57 0.31" to 2.24" FU-38L
Flat (ø2.2 ø0.09" × 2) R25 8 to 89 0.31" to 3.50"
8 to 61 0.31" to 2.40" 8 to 36 0.31" to 1.42" — Approx.
-40 to +60°C R0.98" 8 to 54 0.31" to 2.13" 8 to 59 0.31" to 2.32" 10 to 26 0.39" to 1.02"
20 0.79" 20g
(-40 to +140°F)
Thickness: 3.6 0.14" 20.5 0.81" 2 m 6.6' Free-cut
0 to 25 0" to 0.98" 0 to 25 0" to 0.98" FU-38S
(ø2.2 ø0.09" × 2) R5 0 to 25 0" to 0.98"
0 to 25 0" to 0.98" 0 to 25 0" to 0.98" — Approx.
29 1.14" -40 to +70°C R0.20" 0 to 25 0" to 0.98" 0 to 25 0" to 0.98" 0 to 25 0" to 0.98" 20g
(-40 to +158°F)
Thickness: 3.8 0.15" 22 0.87" 2 m 6.6' Free-cut
0 to 14 0" to 0.55" 0 to 14 0" to 0.55" 0 to 14 0" to 0.55" FU-38R
(ø2.2 ø0.09" × 2) R25
0 to 14 0" to 0.55" 0 to 14 0" to 0.55" — Approx.
29 1.14"
-40 to +70°C R0.98" 0 to 14 0" to 0.55" 0 to 14 0" to 0.55" 0 to 14 0" to 0.55" 20g
(-40 to +158°F)
Flat Bracket Fibers

Appearance Model
Beam emitting (Diameter) bend radius TERA (Longest)
direction Ambient temperature (mm inch) FINE (Initial) ULTRA HSPD
SUPER S-HSPD
Thickness: 2 0.08" 1 m 3.3' Free-cut
2-ø2.1 1 to 270 0.04" to 10.63" 1 to 100 0.04" to 3.94" FU-44TZ
(ø1.0 ø0.04" × 2) 1 to 370 0.04" to 14.57"
Top ø0.08" 6.5 0.26" 1 to 200 0.04" to 7.87" 1 to 22 0.04" to 0.87" Approx.
-40 to +50°C 1 to 66 0.04" to 2.60" 1 to 130 0.04" to 5.12" 1 to 10 0.04" to 0.39" 3g
8 0.31" (-40 to +122°F)
Thickness: 10.5 0.41" 1 m 3.3' Free-cut
2.5 0.10" 1 to 270 0.04" to 10.63" 1 to 100 0.04" to 3.94" FU-47TZ
2-ø2.1 (ø1.0 ø0.04" × 2) 1 to 370 0.04" to 14.57"
Side 1 to 200 0.04" to 7.87" 1 to 22 0.04" to 0.87" Approx.
ø0.08" -40 to +50°C 1 to 66 0.04" to 2.60"
7.2 1 to 130 0.04" to 5.12" 1 to 10 0.04" to 0.39" 4g
0.28" (-40 to +122°F)
2 0.08" R2 2 to 150 0.08" to 5.91" 2 to 52 0.08" to 2.05" FU-41TZ
(ø1.0 ø0.04" × 2) 2 to 180 0.08" to 7.09"
2-ø2.1 R0.08" 2 to 110 0.08" to 4.33" 2 to 13 0.08" to 0.51" Approx.
13 ø0.08" -40 to +50°C 2 to 42 0.08" to 1.65"
0.51" ToughFlex 2 to 74 0.08" to 2.91" 2 to 4 0.08" to 0.16" 5g
7 0.28" (-40 to +122°F)
4 0.16" 1 to 820 0.04" to 32.28" 1 to 220 0.04" to 8.66" FU-42TZ
(ø2.2 ø0.09" × 2) 1 to 1000 0.04" to 39.37"
Flat 20 2-ø3.2 1 to 540 0.04" to 21.26" 1 to 85 0.04" to 3.35" Approx.
ø0.13" -40 to +50°C 1 to 120 0.04" to 4.72" 1 to 320 0.04" to 12.60" 1 to 79 0.04" to 3.11"
0.79" 24g
7 0.28" (-40 to +122°F)
4 0.16" 1 to 820 0.04" to 32.28" 1 to 220 0.04" to 8.66" FU-43TZ
2-ø2.2 (ø2.2 ø0.09" × 2) 1 to 1000 0.04" to 39.37"
1 to 540 0.04" to 21.26" 1 to 85 0.04" to 3.35" Approx.
15 ø0.09" -40 to +50°C 1 to 120 0.04" to 4.72" 1 to 320 0.04" to 12.60" 1 to 79 0.04" to 3.11"
8 0.31" 22g
0.59" (-40 to +122°F)
Sleeve Type Fibers

Appearance Model
SUPER S-HSPD
Sleeve section
cannot be ø2.8 ø0.11" 2 m 6.6' Free-cut
bent ø2 290 11.42" 85 3.35" FU-31
(ø1.0 ø0.04" × 2) R10 340 13.39"
ø0.08" 220 8.66" 22 0.87" Approx.
15 0.59" -40 to +70°C R0.39" 59 2.32" 130 5.12" 12 0.47" 5g
15 0.59" (-40 to +158°F)
Side
Min. bend radius
of sleeve: ø4.8 ø0.19" 1 m 3.3' Free-cut
R25 R0.98" 540 21.26" 150 5.91" FU-33
15 (ø2.2 ø0.09" × 2) R25 750 29.53"
ø2.1 ø0.08" 420 16.54" 54 2.13" Approx.
0.59" -40 to +70°C R0.98" 83 3.27" 230 9.06" 31 1.22" 10g
65 2.56" (-40 to +158°F)
30
Appearance Model
SUPER S-HSPD
Sleeve section M3 50 cm 19.69"
cannot be ø0.82 110 4.33" 46 1.81" FU-65X
bent Cut not allowed R4 150 5.91"
ø0.03" 92 3.62" 13 0.51" Approx.
15 0.59" −40 to +70˚C R0.16" 33 1.30" 68 2.68" 7 0.28" 5g
15 0.59" (-40 to +158°F)
Min. bend radius of M4

sleeve: R10 2 m 6.6' Free-cut
R0.39" ø2 ø0.08" 15 R2 420 16.54" 120 4.72" FU-63Z
(ø1.3 ø0.05" × 2) 580 22.83"
0.59" R0.08" 280 11.02" 29 1.14" Approx.
67 2.64" −40 to +50˚C 90 3.54" 170 6.69" 17 0.67"
ToughFlex 10g
(-40 to +122°F)
Min. bend M4
radius of ø1.65 2 m 6.6' Free-cut
sleeve: R10 ø0.06" 15 FU-63
0.59" (ø1.3 ø0.05" × 2)
R0.39" Approx.
67 2.64" −40 to +70˚C
10g
(-40 to +158°F) 500 19.69" 170 6.69"
R25 640 25.20"
390 15.35" 50 1.97"
Min. bend R0.98" 130 5.12" 250 9.84" 30 1.18"
ø1.65 2 m 6.6' Free-cut
radius of ø0.06" FU-63T
sleeve: R10 15 (ø1.3 ø0.05" × 2)
Top R0.39" Approx.
0.59" −40 to +70˚C
67 2.64" 10g
(-40 to +158°F)
Sleeve section ø3
50 cm 19.69"
cannot be ø0.82 ø0.12" Cut not allowed R4
100 3.94" 46 1.81" FU-45X
bent 120 4.72"
ø0.03" 83 3.27" 11 0.43" Approx.
15 0.59" −40 to +70˚C R0.16" 33 1.30" 68 2.68" 6 0.24" 4g
5 0.20" (-40 to +158°F)
Sleeve section ø4
2 m 6.6' Free-cut
cannot be bent
ø1.65
ø0.16"
640 25.20" 500 19.69" 170 6.69" FU-43
(ø1.3 ø0.05" × 2) R25
ø0.06" 390 15.35" 50 1.97" Approx.
−40 to +70˚C R0.98" 130 5.12" 250 9.84" 30 1.18"
15 0.59" 8g
(-40 to +158°F)
22 0.87"
ø1.5
Sleeve section 1 m 3.3'
cannot be bent ø0.5 ø0.06" 46 1.81" 14 0.55" FU-46
ø0.02" Cut not allowed R10 64 2.52"
15 0.59" 30 1.18" 3 0.12" Approx.
−40 to +70˚C R0.39" 8 0.31"
3 22 0.87" 1 0.04" 2g
(-40 to +158°F)
0.12"
ø2.5
Sleeve section 50 cm 19.69"
cannot be bent ø1.77 ø0.10" FU-22X
160 6.30" 120 4.72" 54 2.13"
Coaxial, narrow ø0.07" Cut not allowed R25
100 3.94" 20 0.79" Approx.
beam 10° 14 0.55" −40 to +70˚C R0.98" 42 1.65"
76 2.99" 11 0.43"
6 4g
0.24" (-40 to +158°F)
High-Flex Fibers (Repeated Bending Fibers)

SUPER S-HSPD
1 m 3.3' Free-cut
ø2 ø0.08" FU-49U
ø2 (ø1.0 ø0.04" × 2)
Approx.
ø0.08" -40 to +50°C
10 0.39" 4g
(-40 to +122°F)
ø3 ø0.12" 220 8.66" 80 3.15" FU-48U
ø3 (ø1.0 ø0.04" × 2) R0.08" 290 11.42" 180 7.09" 21 0.83" Approx.
ø0.12" -40 to +50°C ToughFlex
10 0.39" 59 2.32" 110 4.33" 12 0.47" 4g
1 m 3.3' Free-cut
M3 FU-69U
(ø1.0 ø0.04" × 2)
M3 Approx.
-40 to +50°C
13 0.51" 4g
(-40 to +122°F)
ø1.5 ø0.06" 1 m 3.3' Cut not allowed FU-49X

ø1.5
-40 to +70°C Approx.
ø0.06"
15 0.59" (-40 to +158°F) 250 9.84" 91 3.58" 3g
280 11.02"
170 6.69" 25 0.98"
M3 59 2.32" 130 5.12" 14 0.55"
1 m 3.3' Cut not allowed FU-69X
M3 -40 to +70°C Approx.
10 0.39" (-40 to +158°F) R4 3g
R0.16"
ø3 ø0.12" 2 m 6.6' Free-cut
High-flex FU-48
ø3 (ø1.0 ø0.04" × 2)
Approx.
ø0.12" -40 to +70°C
15 0.59" 350 13.78" 120 4.72" 7g
(-40 to +158°F) 500 19.69"
270 10.63" 32 1.26"
M4 2 m 6.6' Free-cut 90 3.54" 190 7.48" 18 0.71" FU-68
(ø1.0 ø0.04" × 2)
M4 Approx.
-40 to +70°C
15 0.59" 8g
(-40 to +158°F)
31
Reflective
Oil/Chemical Resistant Fibers

Appearance Other power modes Standard target to Model
(mm inch) MEGA TURBO be detected Weight
SUPER S-HSPD
2 m 6.6' Free-cut
ø4.5 ø0.18" 310 12.20" 210 8.27" FU-91
(ø1.3 ø0.05" × 2) 310 12.20"
290 11.42" 130 5.12" — Approx.
-40 to +70°C 200 7.87" 250 9.84" 95 3.74"
20 0.79" 32g
(-40 to +158°F)
Thickness 9.6 0.38" 28 1.10" 40 2 m 6.6' Free-cut

(width of ø4.1 ø0.16" FU-97P
1.57" (ø1.3 ø0.05" × 2) R40
Top mounting hole seating 8 to 20 8 to 20 Approx.
surface) -40 to +60°C R1.57" 200 × 200 mm
0.31" to 0.79" 0.31" to 0.79" 75g
(-40 to +140°F) 8 to 20 0.31" to 0.79" 8 to 20 8 to 20 7.87" × 7.87"
39 2 m 6.6' Free-cut 8 to 20 0.31" to 0.79" 0.31" to 0.79" 0.31" to 0.79" t = 0.7 mm 0.03"
Thickness: 9 0.35" 1.54" 35.2 8 to 20 8 to 20 Glass substrate FU-97S
1.39" (ø1.3 ø0.05" × 2)
0.31" to 0.79" 0.31" to 0.79" Approx.
-40 to +85°C
90g
(-40 to +185°F)
Heat Resistant Fibers

Heat resistant (Diameter) bend radius TERA (Longest)
temperatures*3 Ambient temperature (mm inch) FINE (Initial) ULTRA HSPD
SUPER S-HSPD
2 m 6.6' Free-cut
M6 R5 810 31.89" 430 16.93" FU-85Z
100°C*4 (ø2.2 ø0.09" × 2) 900 35.43"
R0.20" 700 27.56" 150 5.91" Approx.
(212°F) -40 to +100°C 290 11.42"
ToughFlex 520 20.47" 86 3.39" 25g
17 0.67" (-40 to +212°F)
2 m 6.6' Free-cut
M6 1100 43.31" 530 20.87" FU-85A
105°C*4 (ø2.2 ø0.09" × 2) R25 1200 47.24"
860 33.86" 210 8.27" Approx.
(221°F) -40 to +105°C R0.98" 420 16.54"
17 0.67" 630 24.80" 130 5.12" 21g
(-40 to +221°F)
2 m 6.6' Free-cut
M6 950 37.40" 540 21.26" FU-85H
150°C*5 (ø2.2 ø0.09" × 2) R20 1100 43.31"
870 34.25" 150 5.91" Approx.
(302°F) -40 to +150°C R0.79" 290 11.42" 650 25.59" 90 3.54" 35g
17 0.67" (-40 to +302°F)
2 m 6.6' Free-cut
M6 1200 47.24" 1000 39.37" 560 22.05" FU-87
180°C*6 (ø2.2 ø0.09" × 2) R35
890 35.04" 170 6.69" Approx.
(356°F) -60 to +180°C R1.38" 370 14.57" 670 26.38" 100 3.94" 33g
17 0.67" (-76 to +356°F)
M4 1 m 3.3' Cut not allowed FU-87K

200°C R8
(392°F) 10 0.39" R0.31"
(-40 to +392°F) 15g
17 0.67"
Min. bend radius of

sleeve R10 R0.39" M4 1 m 3.3' Cut not allowed FU-82C
770 30.31" 500 19.69"
790 31.10"
ø2.1 35 -40 to +300°C 670 26.38" 170 6.69" Approx.
ø0.08" 1.38" (-40 to +572°F) 350 13.78" 600 23.62" 100 3.94" 29g
90 3.54"
300°C
(572°F)
1 m 3.3' Cut not allowed FU-83C
ø2.6 M4 R25
ø0.10" R0.98"
10 0.39" (-40 to +572°F) 23g
17 0.67"
Min. bend radius of

sleeve R10 R0.39" M4 1 m 3.3' Cut not allowed FU-81C
650 25.59" 470 18.50"
350°C ø2.1 670 26.38"
40 -30 to +350°C 590 23.23" 140 5.51" Approx.
(662°F) ø0.08"
1.57" (-22 to +662°F) 250 9.84" 550 21.65" 90 3.54" 24g
90 3.54"
8 to 62 8 to 51
29.7 1.17"
2 m 6.6' Cut not allowed 0.31" to 2.44" 0.31" to 2.01" FU-38LK
8 to 86 0.31" to 3.39" 8 to 57 8 to 30
17.1 0.67" -40 to +250°C Approx.
0.31" to 2.24" 0.31" to 1.18"
(-40 to +482°F) 8 to 51 0.31" to 2.01" 70g
Thickness: 8 to 54 9 to 23
250°C 5 0.20" R25 0.31" to 2.13" 0.35" to 0.91"
(482°F) R0.98"
27 1.06"
1 m 3.3' Cut not allowed FU-38K
19 0.75" 2.5 to 110 2.5 to 37
(-40 to +482°F) 0.10" to 4.33" 0.10" to 1.46" 45g
Thickness:
5 0.20" 2.5 to 150 0.10" to 5.91" 2.5 to 93 2.5 to 17
2.5 to 27 0.10" to 1.06" 0.10" to 3.66" 0.10" to 0.67"
27 1.06" 2 m 6.6' Free-cut 2.5 to 45 2.5 to 10
180°C*6 FU-38H
(ø2.2 ø0.09" × 2) R35 0.10" to 1.77" 0.10" to 0.39"
(356°F) 19 0.75" Approx.
-40 to +180°C R1.38"
Thickness: 45g
(-40 to +356°F)
5 0.20"
*2 The smallest detectable object was determined at the optimal detecting distance and sensitivity settings.
*3 Use the fiber sensor under dry conditions. Allow some margin for the temperature upper limit when selecting a heat-resistant fiber unit.
32
Area/Array Fibers

Detecting Optical axis (Diameter) bend radius TERA (Longest)
method width Ambient temperature (mm inch) FINE (Initial) ULTRA HSPD
SUPER S-HSPD
20 0.79"
10 mm 0.39" FU-A05D
0.79" (ø2.2 ø0.09" × 2)
(at distance of Approx.
-40 to +70°C
4mm 0.16") Thickness: 20g
(-40 to +158°F) 1100 43.31" 300 11.81"
4.0 0.16" R4*2 1200 47.24"
Array 780 30.71" 100 3.94"
20 0.79" R0.16" 250 9.84"
20 2 m 6.6' Free-cut 440 17.32" 58 2.28"
15 mm 0.59" FU-A10D
0.79" (ø2.2 ø0.09" × 2)
(at distance of Approx.
-40 to +70°C
4mm 0.16") Thickness: 20g
(-40 to +158°F)
4.0 0.16"
15 0.59" 5 to 210 5 to 210
2 m 6.6' Free-cut 0.20" to 8.27" 0.20" to 8.27"
15 mm 0.59" FU-11
(ø2.2 ø0.09" × 2) R25 5 to 210 0.20" to 8.27" 5 to 210 5 to 160
Area (at distance of Approx.
7 0.28" -40 to +70°C R0.98" 5 to 210 0.20" to 8.27" 0.20" to 8.27" 0.20" to 6.30"
15mm 0.59") 5 to 210 5 to 110 19g
(-40 to +158°F)
28 1.10" 0.20" to 8.27" 0.20" to 4.33"

*1 When using the FS-N40 Series. Standard target: White matte paper (Reflective type only.) *2 R10 R0.39" for the first 10 mm 0.39" of cable from the housing.
Liquid-Level Fibers
Type Fiber unit length Minimum

Appearance Model
Transparent tube (Diameter) bend radius Accessories
Detecting Beam (mm inch) Weight
diameter Ambient temperature (mm inch)
method (mm inch) axes
2 m 6.6' Free-cut
FU-95S
(ø2.2 ø0.09" × 2) R5 Binding band × 2
16 Approx.
-40 to +70°C R0.20" Nonslip rubber × 2
23g
(-40 to +158°F)
2 m 6.6' Free-cut R2 FU-95Z

(ø1.0 ø0.04" × 2) R0.08" Approx.
ø4 to 26
ToughFlex 7g
ø0.16" to 1.02" FU-95Z:
Binding band × 2
-40 to +50°C
Nonslip rubber × 2 FU-95HA
(-40 to +122°F) R10
Tube-mountable 1 Spacer × 2 Approx.
FU-95HA: R0.39"
Screw × 2 7g
-40 to +105°C
Nut × 2
(-40 to +221°F) *
FU-95
FU-95: R10
Approx.
-40 to +70°C R0.39"
7g
(-40 to +158°F)
2 m 6.6' Free-cut
More than ø26 FU-95W
(ø2.2 ø0.09" × 2) R5
1.02" 16 — Approx.
-40 to +70°C R0.20"
recommended 20g
(-40 to +158°F)
* The recommended maximum ambient temperature during operation is 90°C (194°F) when constantly using the fiber unit in a high-temperature environment.
Type Fiber unit length Minimum bend radius (mm inch)

Appearance Model
(Diameter)
Detecting (mm inch) PFA-sheathed Weight
Ambient temperature Fiber
method section
2 m 6.6' Free-cut
R0.5 FU-93Z
R0.02" Approx.
(ø1.3 ø0.05" × 2)
ToughFlex 78g
R40*
Immersion FU-93Z: - 40 to +50°C
R1.57"
(-40 to +122°F)
ø6 ø0.24" (PFA) FU-93
FU-93: - 40 to +70°C R25
Approx.
(-40 to +158°F) R0.98"
78g

* Not bendable up to 80 mm 3.15" from the tip.
Helpful Usage Tips

• Use the timer function on the fiber optic amplifier if chattering occurs due to dripping or bubbles in the liquid.
• Do not pull or push the fiber unit. 30N every three seconds maximum for the FU-93 Series, and 10N every three seconds maximum for the
FU-95 Series.
• Stable detection may not be possible in the following cases (FU-93 Series):
If a bubble adheres to the tip of the sensor;
If foreign material adheres to the tip of the sensor;
When detecting highly adhesive liquid;
When detecting high temperature liquids such as strong acid or strong alkali (Liquid with PFA mixed or penetrated, or fluorinated acid.); and
opalescent liquid or liquid that colors PFA.
• A tube whose wall thickness is 3 mm 0.12" or greater may make detection difficult. (FU-95 Series)
• FU-95 Series cannot be used for opaque tubes.
• Use the Display Scaling function of the FS-N40/N10 Series to adjust the displayed light intensity.
• With the FU-93/93Z, the sensor and PFA case are inserted into a thermo fitted tube 80 mm 3.15", up to the tip, in order to secure them in
place. Take care to avoid cutting this tube, which will result in looseness.
33
Retro-Reflective
Retro-Reflective Fibers

(Diameter) bend radius
Beam emitting (mm inch) TERA (Longest) Weight
Ambient temperature (mm inch) MEGA TURBO
direction FINE (Initial)
ULTRA HSPD
SUPER S-HSPD
10 to 1000
2 m 6.6' Free-cut 0.39" to 39.37" 10 to 380
R2 FU-13
(ø1.0 ø0.04" × 2) 10 to 1100 0.39" to 43.31" 10 to 810 0.39" to 14.96"
M6 R0.08" Approx.
17 0.67" -40 to +50°C 10 to 220 0.39" to 8.66" 0.39" to 31.89" —
ToughFlex 10 to 550 — 8g
(-40 to +122°F)
Reflective tape 0.39" to 21.65"
M6 (accessory)
100 to 10000 100 to 2800

26.9 20.8 2 m 6.6' Free-cut 3.94" to 393.70" 3.94" to 110.24"
1.06" 0.82" 100 to 14000 3.94" to 551.18"
FU-15
(ø1.0 ø0.04" × 2) R10 100 to 8500 100 to 1700
Square type Approx.
-20 to +55°C R0.39" 100 to 2300 3.94" to 90.55" 3.94" to 334.65" 3.94" to 66.93"
100 to 4200 100 to 1200 12g
(-4 to +131°F)
Thickness: Reflector:R-2 3.94" to 165.35" 3.94" to 47.24"
12.6 0.50" (accessory)
*1 When using the FS-N40 Series.
Reflector/Reflective Tape Specifications (Optional Parts)
R-2 (OP-95388) R-3 (OP-96436) R-5 Reflective tape (OP-96629)
Type Power modes 51.2 × 61 mm 35 × 42 mm 14 × 36 mm 40 × 30 mm

2.02" × 2.40" 1.38" × 1.65" 0.55" × 1.42" 1.57" × 1.18"
TERA (mm inch) 10 to 2200 0.39" to 86.61" 10 to 1800 0.39" to 70.87" 10 to 1200 0.39" to 47.24" 10 to 1100 0.39" to 43.31"
MEGA (mm inch) 10 to 2000 0.39" to 78.74" 10 to 1700 0.39" to 66.93" 10 to 1100 0.39" to 43.31" 10 to 1000 0.39" to 39.37"
ULTRA (mm inch) 10 to 1600 0.39" to 62.99" 10 to 1300 0.39" to 51.18" 10 to 910 0.39" to 35.83" 10 to 810 0.39" to 31.89"
SUPER (mm inch) 10 to 1100 0.39" to 43.31" 10 to 920 0.39" to 36.22" 10 to 630 0.39" to 24.80" 10 to 550 0.39" to 21.65"
FU-13
TURBO (mm inch) 10 to 760 0.39" to 29.92" 10 to 600 0.39" to 23.62" 10 to 380 0.39" to 14.96" 10 to 380 0.39" to 14.96"
FINE (mm inch) 10 to 460 0.39" to 18.11" 10 to 360 0.39" to 14.17" 10 to 230 0.39" to 9.06" 10 to 220 0.39" to 8.66"
HSPD (mm inch) 10 to 250 0.39" to 9.84" 10 to 200 0.39" to 7.87" 10 to 120 0.39" to 4.72" —
S-HSPD (mm inch) 10 to 230 0.39" to 9.06" 10 to 180 0.39" to 7.09" — —
TERA (mm inch) 100 to 14000 3.94" to 551.18" 100 to 9500 3.94" to 374.02" 100 to 4400 3.94" to 173.23"
MEGA (mm inch) 100 to 10000 3.94" to 393.70" 100 to 6800 3.94" to 267.72" 100 to 4000 3.94" to 157.48"
ULTRA (mm inch) 100 to 8500 3.94" to 334.65" 100 to 6100 3.94" to 240.16" 100 to 3700 3.94" to 145.67"
SUPER (mm inch) 100 to 4200 3.94" to 165.35" 100 to 3300 3.94" to 129.92" 100 to 2400 3.94" to 94.49"
Reflective tape
FU-15
cannot be used.
TURBO (mm inch) 100 to 2800 3.94" to 110.24" 100 to 2200 3.94" to 86.61" 100 to 1900 3.94" to 74.80"
FINE (mm inch) 100 to 2300 3.94" to 90.55" 100 to 1800 3.94" to 70.87" 100 to 1800 3.94" to 70.87"
HSPD (mm inch) 100 to 1700 3.94" to 66.93" 100 to 1200 3.94" to 47.24" 100 to 1200 3.94" to 47.24"
S-HSPD (mm inch) 100 to 1200 3.94" to 47.24" 100 to 920 3.94" to 36.22" 100 to 920 3.94" to 36.22"
Fiber Unit Adapter Options
Fibers with a cable diameter of 1.0 mm 0.04" or 1.3 mm Appearance Cable diameter Adaptor
0.05" come with an adapter to connect to the fiber
amplifier. If you lose the adapter, purchase the ø1.3 Adaptor A
ø0.05" (OP-26500)
appropriate adapter listed here.
ø1.0 Adaptor B
ø0.04" (OP-26501)
34
Thrubeam
Vacuum Environment Type Fibers

Minimum
Ambient Other power modes Model
Detecting Appearance (mm inch) bend radius
Heat resistant temperature TERA (Longest) Weight
Dimensions Description (mm inch) MEGA TURBO
temperatures FINE (Initial) ULTRA HSPD
method
SUPER S-HSPD
1 m 3.3'
M4×P0.7 3 0.12" FU-V84
350°C SUS304 0.47" Cut not allowed
12 Approx.
(662°F) -40 to +350°C
25 0.98" 55g
(-40 to +662°F)
Vacuum
side 21.1
M4×P0.7 0.83"
SUS304 1 m 3.3'
3 0.12" 1800 70.87" 610 24.02" FU-V84L
350°C Cut not allowed R25 2400 94.49"
Thrubeam 1200 47.24" 210 8.27" Approx.
(662°F) 12 0.47" -40 to +350°C R0.98" 500 19.69"
850 33.46" 110 4.33" 60g
(-40 to +662°F)
Max 37
Across-flats: 8 0.31" 2 m 6.6' Free-cut

FU-V7FN
70°C (ø2.2 ø0.09")
Air side Approx.
(158°F) -40 to +70°C
30g
10 0.39" (-40 to +158°F)
Type
Ambient Model
Appearance (mm inch) Material Accessories
Heat resistant temperature Weight
Description
temperatures
FU-VJ1
Optical integrator for 200°C -10 to +200°C M5nut, spring washer, washer two (2) each
Fiber: M
ulti-component glass Approx.
thrubeam set (392°F) (14 to +392°F) O-ring (2): Fluoro-rubber (JIS Type 4D)
45 1.77" 25g

Ambient Applicable fiber Model
Appearance (mm inch)
Heat resistant temperature units Weight
Description TERA MEGA ULTRA SUPER TURBO FINE HSPD S-HSPD
temperatures
End ø4 ø0.16"
F-V2
Vacuum 350°C -10 to +350°C FU-V84 5600 5600 5600 4400 3000 2200 1000 740
Approx.
long-distance lens (662°F) (14 to +662°F) FU-V84L 220.47" 220.47" 220.47" 173.23" 118.11" 86.61" 39.37" 29.13"
2g
7.7 0.30"
Type
Ambient Model
Appearance (mm inch) Features Accessories
Heat resistant temperature Weight
Description
temperatures
With this part, two sets of optical integrators (four

optical integrators in total) can be connected to
O-ring (1) FU-VJ2
2 channel chamber 200°C -10 to +200°C the four through holes.
Material: Fluoro-rubber Approx.
flange (392°F) (14 to +392°F) This part has an outer diameter of 70 mm 2.76"
φ70 (JIS Type 4D) 280g
and is sealed with a V40 O-ring. For details on the
ø2.76"
shape, see "Dimensions."
Attaching the Optical Integrator
An optical integrator can be used to seal the vacuum side and air side and
transmit light between the vacuum-side fiber and the air-side fiber. Optical Vacuum chamber wall
integrators undergo leak testing prior to shipping. (Leak testing in which the Acceptable plate thickness for mounting
leak amount is 1 × 10−10Pa · m3/sec or less) 2 to 12 mm 0.08" to 0.47": When using a tightening nut and spring washer
2 to 16 mm 0.08" to 0.63": When not using a tightening nut and spring washer
Vacuum side Air side
Vacuum-side fiber Nut Optical integrator Air-side fiber
PRECAUTIONS
O-ring
Be careful when breaking the seal as the spring washer
vacuum side fiber and optical coupler are flat washer Finish the O-ring contact surface on the air side
placed in a package containing deaerator so that it has a surface roughness of 1.6 Rz
after being cleaned with alcohol. They are not (JIS B0601-2001) or more.
baked after cleaning, so bake before use. Mounting hole diameter: ø5.1+0.1, -0 ø0.20"+0.1",0
35
Specifications
❚ Amplifier Units
NPN output FS-N41N FS-N42N FS-N43N FS-N44N FS-N41C*1
Model FS-N40
PNP output FS-N41P FS-N42P FS-N43P FS-N44P (Selectable output)
Cable/connector Cable M8 Connector *2
-
Main unit/expansion unit Main unit Expansion unit Main unit Expansion unit Main unit Expansion unit
Number of control outputs 1 1 2 2 2*3 None*4
Number of external inputs - - 1 1 1*3 -
Light source LED Transmitter side: Red, four-element LED (wavelength: 660 nm)
23 μs (S-HSPD*5)/50 μs (HSPD*6)/250 μs (FINE)/500 μs (TURBO)/
Response time
1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA)/64 ms (TERA)
Open-collector, 30 V or less 100 mA or less per output,
-
100 mA or less total for 2 outputs (when used as a solitary unit) / 20 mA or less (when used as an expansion unit)
Control output
NPN 1.4 V or less (output current: 10 mA or less) / 2 V or less (output current: 10 to 100 mA)
Residual voltage -
PNP 1.6 V or less (output current: 10 mA or less) / 2.2 V or less (output current: 10 to 100 mA)
External input Input time: 2 ms (ON) / 20 ms (OFF) or longer *7
Up to 16 units (17 units connected in total including the main unit).

Unit expansion (excluding the FS-N41C)
However, each dual output type will be treated as two expansion units.
Protection against reverse power connection, output overcurrent, output surge, and
Protection circuit
reverse output connection
S-HSPD / HSPD: 0 units, FINE: 4 units, TURBO / SUPER / ULTRA / MEGA / TERA: 8 units
Mutual interference prevention
(The mutual interference prevention values are twice those shown here when Double is set.)
Power supply voltage 10 to 30 VDC (including 10% ripple (P-P) or less), class 2 or LPS*8
During normal operation: 870 mW or less (34 mA or less at 24 V / 62 mA or less at 12 V)
NPN
ECO ON: 800 mW or less (31 mA or less at 24 V / 56 mA or less at 12 V)
FS-N40 ECO FULL: 710 mW or less (28 mA or less at 24 V / 49 mA or less at 12 V)
Single output type (FS-N41P / N42P) and FS-N41C
Power During normal operation: 910 mW or less (36 mA or less at 24 V / 65 mA or less at 12 V)
supply Power
consumption*9 ECO FULL: 750 mW or less (30 mA or less at 24 V / 52 mA or less at 12 V)
PNP
FS-N41C Dual output type (FS-N43P / N44P)
During normal operation: 990 mW or less (39 mA or less at 24 V / 72 mA or less at 12 V)
ECO FULL: 830 mW or less (33 mA or less at 24 V / 59 mA or less at 12 V)
Ambient light Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
Ambient temperature -20°C -4°F to +55°C +131°F (no freezing)*10
Vibration resistance 10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
Shock resistance 500 m / s2; 3 times each for X, Y, and Z axes
Case material Main unit and cover: polycarbonate
Weight Approx. 78 g Approx. 48 g Approx. 83 g Approx. 73 g Approx. 25 g Approx. 23 g
*1 IO-Link Specification V.1.1/COM2 (38.4 kbps) is supported.

*2 Ensure the cable length is 30 m 98.4' or less for the M8 connector type. Ensure the cable length is 20 meters 65.6' or less when connecting by way of IO-Link.
*3 Output 2 and the external input are selectable.
*4 This counts as 1 output when connecting multiple units to the FS-MC8N/P, NU Series.
*5 Restrictions when S-HSPD is selected
• Output 2 of dual output types (FS-N43N / N43P / N44N / N44P / N41C) is fixed to OFF.
• IO-Link communication (FS-N41C) cannot be used.
• Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode.
• Output timer, Limit Detection, and Display Gain cannot be used.
• FULL cannot be selected for the ECO function.
*6 Restrictions when HSPD is selected
• Display Gain cannot be used.
*7 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected.
*8 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher.
*9 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max.
*10 When expanded by 1 to 2 units: -20°C -4°F to +55°C +131°F. When expanded by 3 to 10 units: -20°C -4°F to +50°C +122°F.
When expanded by 11 to 16 units: -20°C -4°F to +45°C +113°F. When using 2 outputs, 1 unit is counted as 2 units.
The prescribed values for the ambient temperature assume that the sensor amplifier has been mounted on a DIN rail installed on a metal surface.
Exercise special care when installing the product in an airtight space.
36
❚ Multi-Output Unit
NPN output FS-MC8N
Model
PNP output FS-MC8P
Number of inputs and outputs Separate control outputs: 8, common output: 1, common input: 1
Response time Depends on the response time settings of the connected expansion units
Up to 8 expansion units can be connected. (However, each dual output type will be treated as 2 expansion units.)
Unit expansion
Allowable passing current: 1200 mA or less
Indicators STATUS indicator (green and red two-color display) MEMORY indicator (orange) LOCK indicator (orange)
Separate control output, NPN output NPN open-collector, 30 V or less, 20 mA or less per output, residual voltage: 1.4 V or less
common output PNP output PNP open-collector, 30 V or less, 20 mA or less per output, residual voltage: 1.6 V or less
External input time Input time of the connected expansion units +11 ms
Protection against reverse power connection, reverse output connection, output
Protection circuit
overcurrent, and output surge
Power supply voltage*1 10 to 30 VDC (including 10% ripple (P-P) or less), class 2 or LPS
Power supply
Power consumption*2 690 mW or less (when used as a solitary unit) (26 mA or less at 24 V/38 mA or less at 12 V [excluding the load current])
Ambient temperature -20°C -4°F to +55°C +131°F (no freezing)
Environmental resistance Vibration resistance 10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
Shock resistance 500 m/s2; 3 times each for X, Y, and Z axes
Case material Main unit and cover: polycarbonate
Weight Approx. 110 g
*1 Match the rated power supply voltage of the expansion units to be connected to the system.
*2 The power consumption including the load when the maximum number of units are connected is 38 W max.
I/O Circuit Diagrams
❚ Amplifier Units (Cable Type)
FS-N41N/N42N FS-N41P/N42P FS-N43N/N44N FS-N43P/N44P

10 to 10 to
10 to 10 to Brown* 30 VDC
Sensor main circuit
30 VDC
Sensor main circuit
Brown*
Load
Load
protection circuit
Overcurrent
protection circuit
Overcurrent
Brown* 30 VDC Brown* 30 VDC PLC, etc.

protection circuit
Overcurrent
protection circuit
Overcurrent
Sensor main circuit

Sensor main circuit
Black Black Short-circuit

Load Load (Control output) (Control output 1) current 2 mA
(Control output 1)
or less
Black (Control output) Black White
White (Control
3.3 VDC (Control output 2) output 2)
0V 0V
Load
Load
Blue* Blue* Short-circuit
current 1 mA
Pink PLC, etc. or less Pink
*FS-N41N only *FS-N41P only
0V 0V
Blue* Blue*
*FS-N43N only *FS-N43P only
❚ Amplifier Unit (M8 Connector Type FS-N41C)
Select PNP or NPN and the function of I/O pin (2) during the initial settings.
2 4
Sensor pin layout 1 3
When using the sensor in PNP mode When using the sensor in NPN mode
[OUT1 + OUT2 selected] [OUT1 + INPUT selected] [OUT1 + OUT2 selected] [OUT1 + INPUT selected]
10 to 10 to 10 to 10 to
1 Brown 30 VDC 30 VDC 1 Brown 30 VDC 30 VDC
circuit
protection
Overcurrent
protection circuit
Overcurrent
protection circuit
Overcurrent
Load
Load
Load
PLC, etc.
Main circuit
Main circuit
Main circuit
White
Main circuit
2
4 Black 4 Black 4 Black
4 Black
circuit
protection
Overcurrent
2 White 2 White
Load
Load
Load
2 White PLC, etc.

3 Blue 3 Blue
0V 0V 0V 0V
The wire colors indicate the colors when using an OP-73864/73865 M8 connector cable (sold separately).
❚ Multi-Output Unit
FS-MC8N FS-MC8P
10 to 30 VDC 10 to 30 VDC
Brown Brown
protection circuit
Overcurrent
protection circuit
Overcurrent
Load
Load
PLC, etc.
Sensor main circuit
Sensor main circuit
Separate control Short circuit

Separate control outputs* current 2 mA
outputs* or less
Red
Red (Common output) (Common output)
3.3 VDC
Load
Load
Pink
Pink (Common input) Short circuit (Common input)
current 1 mA
PLC, etc. or less
0V 0V
Blue Blue
* Black, white, orange, yellow, green, purple, gray, pink / purple
37
Dimensions Units: mm inch
FS-N41N/N41P/N43N/N43P FS-N42N/N42P/N44N/N44P
Main Unit Expansion Unit
(Cable Type) (Cable Type)
ø3.9 ø0.15" 3-core × brown/blue/black 0.34 mm 2 0.000527"2 * ø2.6 ø0.10" 1-core × black 0.34 mm 2 0.000527"2 *1
Cord length 2 m 6.56' Cord length 2 m 6.56'
10.7 10.7
0.42" 0.42"
Max. Maximum
175° when cover is
Maximum opened
when cover is 3.5 0.14" 105.2 4.14" 3.5 0.14"
opened
105.2 4.14"
4 4
30.5 0.16" 30.5 (14)*3 30.7
0.16" (35.5) 1.20"
30.7 (35.5) 1.20" (0.55") 1.21"
(1.40") (13) 1.21" (1.40")
(0.51")
8.1 0.32" 25.7 35.4 8.1 0.32" 25.7 35.4

1.01" 1.39" 1.01" 1.39"
76.8 3.02" Min. 8 0.31" 76.8 3.02" Min. 7*2 0.28"
*1. FS-N44N/N44P is ø3.9 ø0.15, 3-core × black/white/pink 0.18 mm2 0.000279"2

* FS-N43N/N43P is ø3.9 ø0.15, 5-core × brown/blue 0.34 mm2 0.000527"2 , black/white/pink 0.18 mm2 0.000279"2 *2. Minimum 8 for FS-N44N/N44P
*3. (13) for FS-N44N/N44P
FS-N41C FS-N40
Main Unit (M8 Connector Type) Expansion Unit (Zero Line Type)
10.7 10.7
0.42" 0.42"
Max.
175°
Maximum Maximum
when cover is 3.5 0.14" when cover is 3.5 0.14"
opened opened
105.2 4.14" 105.2 4.14"
4 0.16" 4 0.16" 30.5 30.7

30.5 30.7 1.21"
(35.5) 1.20"
1.21" (35.5) 1.20"
(1.40") ø8.6 (1.40")
ø0.34"
8.1 0.32" (15.5) (0.61") 8.1 0.32"

25.7 35.4 25.7 35.4
1.01" 1.39" 1.01" 1.39"
76.8 3.02" 9.5 M8 connector 76.8 3.02"
0.37"
M8 Connector Cable (Optional Part, Sold Separately)

ø3.7 ø0.15" 4-core × 0.28 mm2 0.000434"2
L
Cable length ø9.5
(m feet) ø0.37
OP-73864 2 6.6' (26.7)
(1.05")
L
OP-73865 10 32.8'
Amplifier Securing Bracket (OP-88245 Optional Part, Sold Separately)
Cable Type M8 Connector Type
(16.2) (18.7)
(0.64") (0.74")
(38.7) (38.7)
(1.52") (1.52")
3.8 27.9 6.6 0.26" 3.8 27.9 6.6 0.26"

1.10" 2-ø3.4 ø0.13" 0.15" 1.10" 2-ø3.4 ø0.13"
0.15"
30.6 25.4 Counterbore ø6.4 ø0.25" Depth 3.5 0.14" 30.6 25.4 Counterbore ø6.4 ø0.25" Depth 3.5 0.14"
1.20" 1.00" 1.20" 1.00"
2-(4.4×3.4) (0.17"×0.13") 2-(4.4×3.4) (0.17"×0.13")
Counterbore ø7.2 ø0.28" Depth 3.2 0.13" Counterbore ø7.2 ø0.28" Depth 3.2 0.13"
10.7 10.7
Back of securing 0.42" Back of securing 0.42"
bracket 15 bracket 15
0.59" 0.59"
31 Material: Polycarbonate 31 Material: Polycarbonate
1.22" 1.22"
38
❚ Common to All Models
End Unit When Several Units are Connected

(OP-26751 Optional Part, Sold Separately) Total L
Number (mm inch)
1 10.7 0.42"
End unit End unit*1
2 21.4 0.84"
3 32.1 1.26"
6 0.24"
4 42.8 1.69"
5 53.5 2.11"
6 64.2 2.53"
When Mounted on a DIN Rail 7 74.9 2.95"
8 85.6 3.37"
9 96.3 3.79"
10 107 4.21"
(22.6) 20.8 11 117.7 4.63"
(0.89") 0.82" 12 128.4 5.06"
13 139.1 5.48"
14 149.8 5.90"
9.2 35.4 1.39" 15 160.5 6.32"
0.36" 6 0.24" L 6 0.24" 16 171.2 6.74"
53.8 2.12"
17 181.9 7.16"
*1. When using expansion units, be sure to use the end units. (Optional)
FS-MC8N/P Multi-Output Unit + Unit Expansion

Multi-Output Unit
ø4.7 ø0.19" 12-core × brown/blue 0.20 mm 2 0.000310"2,

black/white/gray/orange/green/pink/purple/
yellow/red/pink-purple 0.15 mm 2 0.0002325"2
Cable length: 2 m 6.6' End unit End unit*1
Total L
10.7 Number (mm inch)
0.42"
1 10.7 0.42"
2 21.4 0.84"
Max. 3 32.1 1.26"
3.5 0.14"
Maximum 175°
4 42.8 1.69"
when cover is
5 53.5 2.11"
opened
30.5 (15.2) 6 64.2 2.53"
100.3 3.95" (0.60")
(35.3) 1.20" 30.7 7 74.9 2.95"
(1.39") 1.21" 8 85.6 3.37"
9 96.3 3.79"
10.4 0.41" 6 0.24" L 6 0.24"

20.8 35.4
0.82" 1.39"
Min. *1. When using expansion units, be sure to use the end units. (Optional)
74.9 2.95"
15
0.59"
FU-R6F/R67 FU-R67G FU-R67TZ
ø1 ø0.04" × 2 ø1 ø0.04" × 2 Across flats: 10 0.39", thickness: 2 0.08" M6 P=0.75 0.03", effective screw length 7.5 0.30"
Across flats: 10 0.39", thickness: 2 0.08"
Core fiber Core fiber Nickel-plated brass
diameter ø2.2 ø0.09" × 2 diameter ø3.8 ø0.15"
M6 P=0.75 0.03" M6 P=0.75 0.03" ø5 ø0.20" ø2.2 ø0.09" × 2
(acrylic) (acrylic) SUS304 ø1 ø0.04" × 2
Nickel-plated brass Polyethylene Nickel-plated brass Polyamide Polyethylene
Core fiber diameter (acrylic)
ø5 ø5 11.5
0.45"
ø0.20" ø0.20"
Polyamide Polyamide 2000 78.74"
4 0.16" 13 0.51" 4.8 4 0.16"
4 0.16" 2000 78.74" 0.19"
13 0.51" 1000 39.37"
8 0.31"
10 0.39"
FU-R67TG FU-R7F FU-R77

M6 P=0.75 0.03", effective screw length 7.5 0.30" M2.6 Across flats: 7 0.28", thickness: 2 0.08"
Across flats: 7 0.28", thickness: 2 0.08"
Nickel-plated brass M2.6 Transmitter P=0.45 0.02" M4 P=0.7 0.03"
ø3.8 ø0.15" Transmitter P=0.45 0.02" M4 P=0.7 0.03" Nickel-plated brass
ø5 ø0.20" ø1 ø0.04" × 2
SUS304 Nickel-plated brass 3
Polyamide ø2.2 ø0.09" × 2 ø1 0.12" ø2.2 ø0.09" × 2
Core fiber diameter (acrylic) ø1 3 ø0.04"
11.5
ø0.04" 0.12" Polyethylene 11 0.43" Polyethylene
0.45" Core fiber
Core fiber 12 0.47"
diameter (acrylic)
1000 39.37" diameter (acrylic)
6 4 0.16" ø3.2 ø0.13"
0.24" ø3.2 ø0.13" Polyamide
8 0.31"
Polyamide
Receiver
2000 78.74"
5.5 12 Receiver 5.5 2000 78.74"
0.22" 0.47" 0.22" 11
10 0.39" 0.43"
FU-R77G FU-R77TZ FU-R77TG

M2.6 ø1 ø0.04" ø1 ø0.04"
P=0.45 Across flats: 7 0.28", thickness: 2 0.08" M4 P=0.7 0.03"
Core fiber diameter (acrylic) M4 P=0.7 0.03" Core fiber diameter (acrylic)
Transmitter 0.02" M4 P=0.7 0.03" Effective screw
Nickel-plated brass A Effective screw A
ø4 ø0.16" length 6.5 0.26" Transmitter Transmitter
length 6.5 0.26" 5
ø1 3 ø2.9 ø0.11" × 2
4.4 ø2.2 ø0.09" × 2 0.20"
ø0.04" 0.12" M2.6 P=0.45 0.02" 0.17"
M2.6 P=0.45 0.02" ø2.9 ø0.11" × 2
SUS304 Effective screw 7 0.28" Polyethylene 7 0.28"
Core fiber 12 0.47" Effective screw SUS304
diameter 22 length 2.5 0.10" 3 0.12" length 2.5 0.10" 3 0.12"
(acrylic) 0.87" Nickel-plated brass A ø3.2 ø0.13" A
5.5 0.22"
Nickel-plated brass 5.5 0.22" ø3.2 ø0.13"
ø3.2 ø0.13" Polyamide Polyamide
12 7 0.28"
Polyamide 0.47" 7 0.28"
12
5.5 8.1 0.32" 0.47"
Receiver 0.22" 12 0.47" 4.4 7
2000 78.74" 8.1 0.32" 7 0.28"
24.5 Receiver 0.17" 0.28" 5 1000 39.37"
0.96" Receiver 0.20"
1000 39.37"
39
Simple and Reliable
The Solution to Any and All Applications.
www.keyence.com
E-mail: [email protected]
Copyright (c) 2018 KEYENCE CORPORATION. All rights reserved. FSN40-KA-C-US 1058-4 611G30

FS N41N

Uploaded by

Copyright:

Available Formats

FS N41N

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FS N41N

Uploaded by

Copyright:

Available Formats

NEW Digital Fiber Optic Sensor

A Return To Simplified Sensing

A Genuine All-Purpose Solution

Fiber Unit Indicator

Digital Fiber Optic Sensor

• Easy to Read Display

• Built-In Preventive Maintenance

Enhanced power makes

Power Select Switch

NEO Parabolic LED

Contrasts/ Distant Transparent Targets in Small

Tight Oily/Wet High Temperature Environments with On Robotic

Previous (FINE) FS-N40 (TERA)

Increased Detection Capabilities

New LED Module - “NEO Parabolic LED”

❚ Evolution of LED Modules

Easy to Read Display

❚ Conventional Display ❚ FS-N40 Display

Innovative OLED Display

Bar Graph Display Easily Understandable Messages

Simplify the display even No need to decipher cryptic

Fiber Units with Built-In Indicators

Integrated ON/OFF Status Indicators

Alignment Assistance Easy Head Identification

Alignment has never been Quickly recognize which head

Built-In Preventive Maintenance Features

Harsh Environment Adjustment Automatic Power Control

Light decreased by Initial detection

Compensates for ambient conditions automatically

Interference Prevention Heat Sink

1 Detects ambient light

Customizable Interface for Clear Status Indications

Uniform Calibration and Display Various Display Option

Highly Visible Indicator Saturation Canceling

Network Compatibility IO-Link Compatibility

Selectable Language Options Bipolar Outputs

Reduce Startup, Operation, and Maintenance Workloads

power supply/output cable coming

Benefits During Every Stage of Use

Setup Changeover Troubleshooting Maintenance

Easily Add Amplifiers without Extra Wiring

When Network Compatibility is Necessary

Network Communication Unit

When Saving Space is Important

When Standard Connections are Adequate

Control multiple sensors at once via network communication

Increase Efficiency During Startup, Operation, and Maintenance

Memory function enables speedy settings recovery and easy changeover

Simplified Wiring Easy Program Changeover Effortless Maintenance

Best-Selling and Reliable Simplified Wiring

Connect up to 17 amplifiers, featuring stable interference prevention

Amplifier Units Multi-Output Units

Model Control External Model Separate control Common Common

Main unit FS-N41N FS-N41P Main unit FS-MC8N FS-MC8P 8 1 1

Main unit FS-N43N FS-N43P

Model Control External OP-26751 OP-26751

Main unit FS-N41C 2* 1*

Zero line type

Network Units Network Unit Optional Parts (sold separately)