IN - Assignment Question
IN - Assignment Question
Page 1 of 9
INTRODUCTION TO NETWORKING
Group Assignment (50%)
Intake: APU1F2209CS(CYB)\APD1F2209CS(CYB)\APU1F2209CS\APD1F2209CS\
APU1F2209CS\(DF)\APD1F2206CS(DF)\APU1F2209IT\APD1F22096IT\
APU1F2209SE\APD1F2209SE\APU1FCS (IS)\APD1FCS(IS).
Hand Out Date: 2nd/3rd Week of Semester
Due Date – Individual Work: 25th November 2022 - Word Count Limit: 1500 per person
Due Date – Team Work: 13th January 2023 - Word Count Limit: 1000 per person
Lecturer: Dr. Kamalakannan Machap\Mr. David Tan\ Mr Yogeswaran Nathan\ Ms Zaireeda
Email:[email protected]\[email protected]\[email protected]\
[email protected]
This assignment’s aim is to allow students to design and configure a LAN topology by applying
basic principles of wired and wireless networks, together with the configuration of network devices
(including routers & switches) by using the Cisco Packet Tracer simulation tool. Students are also
expected to be able to design their IP addressing scheme with subnetting to segment their network.
In the Cyber Jaya branch, the first floor has a reception area, a pantry for staff, Cyber Jaya
branch manager room, and a CTO room. The second floor has a development hub, Server
room, technical assistant to monitor the network, and a meeting/conference room.
All staff will be using laptops and PCs with a suitable office environment and apply the
printer at the necessary department that is connected to a network. Both blocks have a
necessary IoT infrastructure such as CCTV and WiFi.
Your team is appointed to assist with the proposal to plan for a suitable network design for this
new project. The main objective is to identify the requirement and conduct research to propose a
suitable topology diagram with the necessary network devices and IP addressing scheme to
make it work.
The findings and outcome of your research should be arranged in a proper flow to be presented to
the Technical team who are involved in the full design of the network. In addition, prepare a Cisco
Packet Tracer diagram as a proof of concept for your research work.
2. The Individual assignment should be submitted individually by the students on the 9th
week of the semester.
3. The group assignment should be completed in a group of not more than 4 members. The
group assignment and packet tracer file must be submitted by the group leader.
4. Select the team leader among the group members for the group assignment.
5. All submissions should be done in Moodle
6. Double-checkeck the work before online submission (Peer Evaluation form and Self-
Reflection, etc).
1. The assignment should attach the front cover, and table of contents and attach the completed
Work Breakdown Structure (WBS) must be digitally signed and agreed upon by all group
members.
2. You are required to build a complete computer network environment for the scenario,
supported by good research work.
3. Design the floor plan using any designing tool with very good justification and provide
configuration of the logical network diagram using Cisco Packet Tracer. Submit the softcopy
of the floor plan and network diagram (configuration) together with the assignment.
4. Your report must be typed using Microsoft Word with Times New Roman font size 12. The
report should be in 1.5 spacing.
5. The report has to be well presented and should be typed. Submission of reports that are
unprofessional in it’s outlook will not fare well when marks are allocated.
6. The report should have a one (1”) margin all around the page as illustrated below:
1 inch 1 inch
1 inch
1 inch
The Typed Text
1 inch
7. Plagiarism is a serious offence and will automatically be awarded a zero (0) mark.
8. All information, figures and diagrams obtained from external sources must be referenced using
the APA referencing system accordingly.
6. Conclusion
7. References (APA format)
8. Alternate Roles
9. Peer Evaluation
10. Submit the entire network diagram packet tracer file.
CLO2: Form the local area network design and configuration using simulation tool for the
given scenario
Introduction
- Objective
- Assumptions (number of hosts, rooms, labs, etc.)
Individual
Floor plan- Floor plan- Floor plan- Floor plan-
Component
(Layout) (Layout) (Layout) (Layout)
Justification Justification Justification Justification
Configuration/Demonstration
CLO2: Work in team to justify the topology and IP addressing plan based on the network
design
(PLO4: Interpersonal Skills)
For students who have to re-do the assignment (failed the 1st attempt), produce the assignment
individually. Complete both sections and choose one building design for the new submission.
Group Assignment
Assessment Criteria
Marks Awarded
Network Diagram 10
Documentation 5
Referencing 5
Configuration 10
Demonstration 10
Topology Justification 10
Documentation 5
Referencing 5
Alternate Roles 5
Peer Evaluation 5