Chapter 3

Introduction to Microsoft PowerPoint

Microsoft PowerPoint is a professional presentation program that allows the user to create
"presentation slides" that can be displayed on the computer screen or through a projector that is plugged
into the computer. A PowerPoint presentation is a good way to convey pieces of information, usually in
the form of an outline, to a large audience. Generally, PowerPoint presentations are appealing to users
because they are easy to create and edit and generally small enough to fit onto a CD or a USB Jump
Drive.
Therefore, a user does not have to carry around any slides or slide projector, and, if necessary, can
make any last-minute changes to the presentation.

Today, we will be using Microsoft PowerPoint 2003 to explore the program. Microsoft PowerPoint 2007
looks different, but works the exact same way. If you have questions about PowerPoint 2007, please let
your instructor know

Microsoft PowerPoint Components

Before you get started with Microsoft PowerPoint (commonly referred to as simply PowerPoint), you will need
to locate and open it from the computer. It may be on your desktop. From the computer desktop:
1. Double-click on the MS PowerPoint icon

If the MS PowerPoint icon is not on the desktop, go to the Start menu:

1. Click Start ►Programs ►Microsoft PowerPoint*
*Occasionally, Microsoft PowerPoint will be in a folder called “Microsoft Office” or similar – this
will make one more step between “Programs” and “Microsoft PowerPoint.”

MS PowerPoint will open a blank page called

“Presentation1.”

This is an image of the upper-left

corner of MS Word.

This box features two important bits of

information: which file you are currently
working on (in this case, “Presentation1”
since we have not yet renamed it) and
which program you are using (in this
case, “Microsoft PowerPoint.”).

Notice the default title "Presentation1." You will get a chance to rename your presentation slides the first time
you choose to save it.

33
 Using the Browser’s Toolbar

This is a close-up view of the Title Bar, where file information is located.
Notice the three buttons on the right side, controlling program features. Remember that the X button on the far
right means close the program, the middle button is a toggle switch between full screen and a small window, and
the single line button on the left means minimize to the task bar.

The Menu Bar

The Menu Bar is a common site in almost all Microsoft Windows programs. It features text-based
menus, on which are listed virtually every option available to the user in the entire program. Each
menu expands when clicked (with the left mouse button), offering many options categorized by specific
tasks.

You can click on each of the words to see a menu of the tasks you can
perform.

To see a menu:
1. Point with your mouse to a menu option
2. Click the left mouse button once to open a drop-down menu
3. Point with your mouse to a particular item
4. Click once with the left mouse button to select the item

The Standard Toolbar

Toolbars provide “shortcuts” to commands also found in the Menu Bar. Toolbars are
usually located just below the Menu Bar, and exist to offer another way to perform the same task. As with
all Microsoft Windows programs, there are usually three ways in which to perform every task in order to
suit the user’s preferences.
Remember, if you can’t remember what an icon stands for, however your mouse over it and a box will
pop up with the explanation!
The most commonly used commands in PowerPoint are also the most accessible. Some of these
commands are:

PRINT PREVIEW
NEW SAVE 33
COPY UNDO
OPEN PRINT SPELL CHECK PASTE INSERT
 The Formatting Toolbar

The Formatting Toolbar offers options that can change the font, size, color, alignment, organization, and
style of the text in the presentation slides. For example, (starting from the left side of the Toolbar) the
“Arial” indicates the FONT of your text; the “32” indicates the SIZE of your text; and so on.
This toolbar works the exact same way as the MS Word Formatting Toolbar. The main difference is that
the format changes will only affect the text box in which you are currently working. All other text boxes
will remain in the default setting ("Arial" font, size "32").

The Drawing Toolbar

There may also be a Drawing Toolbar on your screen. (If not, you can go to View ►Toolbars and click on
“Drawing” to make it appear). Many of the things we are going to do today through the menus have
shortcuts on this toolbar. Remember, if you can’t recall what an icon stands for, hover your mouse over it
and a box will pop up with the explanation!

Design & New Slide Icons

Two additional shortcut icons appear on the MS PowerPoint toolbar: the Design icon and the New Slide
icon. Both commands are frequently used, and it is good to be familiar with their location on the toolbar.

The Design icon is a shortcut to the slide The New Slide icon automatically adds a new, blank
design page. Here you will be able to create slide for you to work on. You can keep track of the
and edit the appearance of your slide(s). slides you have already worked on in the Slide
Outline box on the left-hand side of the screen. You
can access a slide at any time by clicking on it with
your mouse through this screen.

34
 Slide Design
One of the more popular features of MS PowerPoint is that it gives the user a wide
variety of design choices. At some point, you may wish to change the design and color
of the background for your slides. To do so, simply click on the Design icon:

On the right-hand side of your screen will appear the "Slide Design" pane. Here, you are given three design
options to apply to your slides.
Design Templates: Here is a list of over 20 templates that you can choose from to apply to the
background of your slides. For each template, you have the option of applying
the design to all slides or to only the selected slide. You can view these options by
clicking on the arrow on the right side of the template. (You can also design your
own background, but we will cover this in the PowerPoint 102 class.)

Color Schemes: This option gives you a variety of color schemes to choose from to apply to your
selected design template.
Animation Schemes: This option will allow you to select different types of animation that can be applied
to either all the slides or selected slides. The animation schemes are different ways the slides are
"introduced" to your audience, such as "faded wipe" or pinwheel."

Slide Layout
The default in PowerPoint for each new slide is to have a Title text box and a Text text box. As discussed earlier, you do
have the option of rearranging the text boxes to fit any layout you have in mind. However, it is often easier to select a
layout that fits your needs rather than reformatting the default layout for each slide.

To choose a slide layout, select Format ► Slide Layout from the Menu Bar. On the right-
hand side of your screen will appear the "Slide Layout" pane.
From here, you have the option of applying a slide layout either to a selected slide or to a
new slide that has yet to be inserted. You can view these options by clicking on the arrow
on the right side of the template.

Note the four different types of layout categories.

Text Layout: These options are for choosing a layout in which you are only organizing different text boxes. There
are no spaces for pictures, charts, or graphs.
Content Layout: These options are for choosing a layout that will only contain pictures, charts, or graphs. There
are no spaces for text boxes.
Text and Content Layout: These options have room for both text boxes and pictures/charts/graphs.
Other Layouts: These are designed for other media content such as video clips or audio tracks.

35
 Text Boxes
Text Boxes are "designated" areas that allow you to type words, sentences, and bullet points into the slide. You
can adjust the size and placement of the text box within any given slide. It is also possible to have multiple text
boxes per slide.

When you first open MS PowerPoint there will automatically be two text boxes on the slide; "Click to add title" and
"Click to add subtitle." These text boxes already have a preset format applied to them. The "title" box has a font
size of "44" while the "subtitle" box has a font size of "32."
You can change the text format of any box at any time by adjusting the format settings on the Formatting Toolbar.

To adjust the size of the text box, first click on the text box. Notice the change in border. Once you have clicked
on a text box, the border of the box becomes thicker and little circles appear on the corners and at the
midpoints of the box.

Move the mouse pointer over any one of the circles. Notice that the mouse pointer will change to either
↔ or ↕. Click and hold down the left mouse button. To adjust the height, move the mouse up or down;
to adjust the width, move the mouse left or right. Note that the corner circles can adjust both height and
width, while the mid-point circles can only adjust either height or width.

To move the text box to a different location on the slide, move your mouse pointer over any part of the
thick, gray box outline. Notice the change in your mouse pointer (it will look something like a "plus" sign
(+) with arrows). Click and hold down the left button on your mouse. You can now drag the text box to
any position on slide by simply moving your mouse.

To write in a text box, simply click inside the box with your mouse. When a cursor is flashing, you are
ready to type.

You can also add a text box (or an additional text box) to any slide at any time! Use your mouse to click
Insert ►Text Box and then “click and drag” your mouse on the slide in the area you want the text box to
appear. (On the Design Toolbar - the “Insert Text Box” button looks like)

36
 Pictures
Inserting a picture into MS PowerPoint is very similar to inserting a picture into MS Word.
1. Select the slide that you wish to add the picture to.
2. From the Menu Bar, select Insert ► Picture ► From File (or Clip Art).
3. Choose the picture you wish to insert and select "Insert."
*Note: The picture will be inserted in its original size, so you will probably have to re-size it the same way
you re-sized a text box. Click on the picture and note the circles at the corners and at the midpoints of
the length and width. Move your mouse pointer over the circles, left-click the mouse and hold the button
down. Move the mouse vertically or horizontally to re-size.
Rotating a picture: It is possible to rotate pictures in MS PowerPoint. Once a picture has been
inserted onto a slide and you have clicked on the picture so that it is "outlined," notice the green
circle above the center of the picture.

Move the mouse pointer over the green circle, and left-click and hold the button down. Now move the
mouse either clockwise or counter-clockwise and the picture will rotate in the same direction. When it is
in the position you want, release the mouse button.

You can also add Charts and Graphs and Tables to your PowerPoint Presentation. It is similar to adding a
picture, but you also have the have the data (information) ready to add in order to make it work. If you
already have the chart or graph in another file (whether it be PowerPoint or Word or Excel or anything
else), you can copy and paste it into your presentation. We will cover how to create a new
Chart/Graph/Table in PowerPoint 102.

Slide Management
Once you have completed a slide, you can create a new slide by clicking on the New
Slide icon. Notice that your previous slides still appear on the left-side frame. You can
still access your previous slides by simply clicking on them from this location.
Once all your slides have been completed, you can present your slides in a "slideshow." From the Menu
Bar select Slide Show ► View Show.
Notice that the slide takes over your entire screen. To navigate through the slides use the arrow keys on
your keyboard (←, → or ↑, ↓). You can also navigate through your slides clicking on the left or right
arrows in the lower left corner of your slide.
To end your slide show, click on the square box on the lower left side of your slideshow (this is difficult to
see at first because it is designed to blend in to your slide show so it won't be noticeable to your
audience). Select End Show from the pop-up window. Or, just press the “ESC” (Escape) key!

37
 Saving Slide Shows

When you come to a stopping point and want to leave the computer or close the program, it is important to
save your work (even if you are printing a hard copy — saving should be a reflex).
Click ►File ►Save from the Menu Bar to get started.
You can change the filename that PowerPoint has chosen just by typing a new one in the File name box at
the bottom of the window that appears.

MS PowerPoint will automatically save your document with the suffix “.ppt” – this is
To bring a saved document back up on the screen from MS PowerPoint:
simply a tag that lets PowerPoint know that your work is specific to this program. You do
not
1. have
Click to type►Open
►File it – just from
highlight what isBar.
the Menu there (default is “Presentation1”) and write a
new file name.
2. Find where(If
theyou
fileare using the
is located newest
(which version
folder, thatofis)PowerPoint it the
and click on willfilename
have the of
suffix
the
“.pptx”)
document you want.
3. Click ►Open.

Printing Slide Shows

To print your MS PowerPoint slides:

1. Click ►File ►Print from the Menu Bar and a Print window will pop up on the screen.
2. Click ►OK for your document to start printing.

As with all commands in MS PowerPoint, you can make changes along the way. From the Print menu, you
can alter how many copies will be made, in what order the pages will be, and much more. You can choose
to print a certain number of slides per page, or the outline, or even notes!

Finding Help
You can get help with MS PowerPoint by choosing Microsoft PowerPoint Help or Show the Office Assistant
from the Help menu on the main menu bar.

Tutorials are also available on the Internet. Your instructor can help you with locating some of these
resources.

1. What is Microsoft powerpoint?

_________________________________________________________________________
_________________________________________________________________________
38
 _________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

2. Explain any two components of Microsoft powerpoint Window.

_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
3. What is TEXT BOX?
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

4. Explain Slide Layout.

_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

39

38