Scribd
Upload
42 views2 pages

Rafter Report

This document provides information about the cross section, deflections, strength, stability, and interaction coefficients of linear element No. 15, which has an IPE500 cross section. It evaluates the element against various design criteria for deflections, stresses, buckling, and interaction under different load combinations. It finds the element satisfies all criteria checked with margins of safety ranging from 1% to 92%.

Uploaded by

mengkheang31071999
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views2 pages

Rafter Report

This document provides information about the cross section, deflections, strength, stability, and interaction coefficients of linear element No. 15, which has an IPE500 cross section. It evaluates the element against various design criteria for deflections, stresses, buckling, and interaction under different load combinations. It finds the element satisfies all criteria checked with margins of safety ranging from 1% to 92%.

Uploaded by

mengkheang31071999
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Project: 12/27/2023 5:10:00 PM

Shape sheet - Linear element No. 15 Linear

1) Cross section

Shape IPE500
Dimensions(cm) h = 50.00 b = 20.00 tw = 1.02 tf = 1.60 r = 2.10 r1 = 0.00
Cross sections(cm2) Area = 115.50 Avy = 69.32 Avz = 59.85
Inertia(cm4) It = 89.29 Iy = 48200 Iz = 2142
Inertia(cm6) Iw = 1.25444e+06
Modules(cm3) Wply = 2194 Wplz = 335.9
Material S275 E = 210000 MPa Nu = 0.3 G = 80800 MPa
Grade fy = 275.00 MPa fu = 430.00 MPa

2) Deflections

1st criterion Element deflections:


y : Case no 141 : 1x[1 G]+1x[2 Q]+0.5x[19 WY-S], Mesh No. 15.27 4/4 (Extremity)
L/8507 < L/150 (2 %) (0.18 cm < 10.09 cm)
z : Case no 141 : 1x[1 G]+1x[2 Q]+0.5x[19 WY-S], Mesh No. 15.27 4/4 (Extremity)
L/163 < L/150 (92 %) (9.26 cm < 10.09 cm)

3) Cross sections strength

Tension Compression Case no 114 : 1.35x[1 G]+1.5x[2 Q]+0.75x[14 WX-D3], Mesh No. 15.3 4/4
(6.2.4) Cross section : Class 1
Fx < Nc,Rd : 96.15 < 3176.25 kN (3 %)
Shear on Y direction Case no 119 : 1.35x[1 G]+1.5x[2 Q]+0.75x[19 WY-S], Mesh No. 15.1 4/4
(6.2.6) Cross section : Class 1
hw 
< 72 (6.22) : 41.76 < 55.46
tw 
Fy,Ed < Vy,pl,Rd : 0.10 < 1100.67 kN (0 %)
Shear on Z direction Case no 114 : 1.35x[1 G]+1.5x[2 Q]+0.75x[14 WX-D3], Mesh No. 15.3 4/4
(6.2.6) Cross section : Class 1
hw 
< 72 (6.22) : 41.76 < 55.46
tw 
Fz,Ed < Vz,pl,Rd : 96.43 < 950.28 kN (10 %)
Bending on Y-Y Case no 120 : 1.35x[1 G]+1.5x[2 Q]+0.75x[20 WY-D], Mesh No. 15.3 4/4
(6.2.5) Cross section : Class 1
My,Ed < My,c,Rd : 274.25 < 603.35 kN*m (45 %)
Bending on Z-Z Case no 119 : 1.35x[1 G]+1.5x[2 Q]+0.75x[19 WY-S], Mesh No. 15.27 4/4
(6.2.5) Cross section : Class 4
Mz,Ed < Mz,c,Rd : 0.51 < 88.41 kN*m (1 %)
Bending on Y-Y and axial force Case no 120 : 1.35x[1 G]+1.5x[2 Q]+0.75x[20 WY-D], Mesh No. 15.1 1/4
(6.2.9) Cross section : Class 4
Sx Ed
fy
< 1 (6.43) : 0.36059 < 1 (36 %)
M0
Bending on Z-Z and axial force Case no 120 : 1.35x[1 G]+1.5x[2 Q]+0.75x[20 WY-D], Mesh No. 15.11 4/4
(6.2.9) Cross section : Class 3
Sx Ed
fy
< 1 (6.42) : 0.03068 < 1 (3 %)
M0
Bending on Y-Y and Shear on Z Case no 122 : 1.35x[1 G]+1.5x[2 Q]+0.75x[22 WY-D2], Mesh No. 15.1 4/4
(6.2.8) Cross section : Class 1
Vz pl Rd
Vz,Ed < (6.2.8(2)) : 82.54 kN < 836.14 kN
2
Clause 6.2.8(2) fulfilled. Check not done.
0.00000 < 1 (0 %)
Bending on Z-Z and Shear on Y Case no 122 : 1.35x[1 G]+1.5x[2 Q]+0.75x[22 WY-D2], Mesh No. 15.1 4/4
(6.2.8) Cross section : Class 1
Vy pl Rd
Vy,Ed < (6.2.8(2)) : 0.09 kN < 550.34 kN
2
Clause 6.2.8(2) fulfilled. Check not done.
0.00000 < 1 (0 %)
Bi-axial bending Case no 120 : 1.35x[1 G]+1.5x[2 Q]+0.75x[20 WY-D], Mesh No. 15.1 1/4
(6.2.9) Cross section : Class 4
Sx Ed
fy
< 1 (6.43) : 0.36285 < 1 (36 %)
M0

Torsion Case no 119 : 1.35x[1 G]+1.5x[2 Q]+0.75x[19 WY-S], Mesh No. 15.11 4/4
St. Venant (6.2.7) Cross section : Class 3
fy
3
Mx < Wt • : 0.007 < 8.86 kN*m (0 %)
M0

4) Elements stability

Unfavorable case Case no 120 : 1.35x[1 G]+1.5x[2 Q]+0.75x[20 WY-D], Mesh No. 15.3 4/4
Cross section : Class 1

Buckling on Y-Y Lfz = 18.16 m  y = 1.024 Curve a y = 0.21 y = 1.11 y = 0.649


(6.3.1) Ncry = 3029.48 kN
Buckling on Z-Z Lfy = 15.13 m z = 4.048 Curve b z = 0.34 z = 9.35 z = 0.056
(6.3.1) Ncrz = 193.87 kN
Lateral-torsional buckling Ldi = 1.26 m Lds = 1.26 m
(6.3.2.1) C1 = 1.160 C2 = 0.000 zg = 0.25 m kz = 1.000 kw = 1.000
Mcr = 8023.40 kN*m LT = 0.274
Curve - LT = 1.00 LT = 1.00 LT = 1.000

Report No.: Industrial steel building 30m_version6_ndc03.docx Page 1


Project: 12/27/2023 5:10:00 PM

Shape sheet - Linear element No. 15 Linear

Auxiliary terms Cmy0 = 0.97 (| x | = 2.09 cm at x = 10.41 m)


(Annex A) Cmz0 = 0.91
NcrT = 16117.05 kN
max = 4.05 Mcr0 = 6914.66 kN*m 0 = 0.30 0limite = 0.18
Cmy = 1.00 Cmz = 0.91 CmLT = 1.37 (| x | = 0.00 cm at x = 0.00 m) aLT = 1.00 y = 17.17
muy = 0.99 muz = 0.52 wy = 1.14 wz = 1.50 npl = 0.03
bLT = 0.00 cLT = 0.00 dLT = 0.00 eLT = 0.00
Cyy = 0.89 Cyz = 0.65 Czy = 0.51 Czz = 0.76
Interaction coefficients kyy = 1.57 kyz = 1.90 kzy = 0.75 kzz = 1.25
(Annex A)
Verification NEd My Ed + My Ed Mz Ed + Mz Ed
(6.61) + kyy • + kyz • ≤ 1.00
NRk My Rk Mz Rk
y • LT •
M1 M1 M1
0.05 + 0.71 + 0.00 = 0.76 < 1.00 (76%)
Verification NEd My Ed + My Ed Mz Ed + Mz Ed
(6.62) + kzy • + kzz • ≤ 1.00
NRk My Rk Mz Rk
z • LT •
M1 M1 M1
0.54 + 0.34 + 0.00 = 0.88 < 1.00 (88%)

Report No.: Industrial steel building 30m_version6_ndc03.docx Page 2

You might also like