Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 2/20/2023
Design code AISC 360-16

Material
Steel A36
Concrete 4000 psi, 4500 psi

Project item CON1

Design
Name CON1
Description
Analysis Stress, strain/ simplified loading
Design code AISC - LRFD 2016

Beams and columns

β– α-
Cross- γ - Pitch Offset ex Offset ey Offset ez
Name Direction Rotation Forces in
section [°] [mm] [mm] [mm]
[°] [°]
COL 2 - I350 0.0 -90.0 0.0 0 0 0 Node
Project:
Project no:
Author:

Cross-sections

Name Material
2 - I350 A36

Anchors

Diameter fu Gross area

Name Bolt assembly
[mm] [MPa] [mm2]
20 A325M 20 A325M 20 830.0 314

Load effects (equilibrium not required)

N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE1 COL -95.0 10.0 25.0 15.0 63.0 0.0

Foundation block

Item Value Unit

CB 1
Dimensions 300 x 400 mm
Depth 600 mm
Anchor 20 A325M
Anchoring length 300 mm
Shear force transfer Anchors

Check
Summary

Name Value Check status

Project:
Project no:
Author:
Analysis 100.0% OK
Plates 3.9 < 5.0% OK
Anchors 92.7 < 100% OK
Welds 98.9 < 100% OK
Concrete block 68.4 < 100% OK
Buckling Not calculated

Plates

fy Thickness σEd εPl σcEd Check

Name Loads
[MPa] [mm] [MPa] [%] [MPa] status
COL-bfl 1 248.2 11.0 LE1 228.5 2.5 0.0 OK
COL-tfl 1 248.2 11.0 LE1 229.3 3.0 0.0 OK
COL-w 1 248.2 7.0 LE1 224.0 0.3 0.0 OK
BP1 248.2 20.0 LE1 231.3 3.9 0.0 OK

Design data

fy εlim
Material
[MPa] [%]
A36 248.2 5.0

Symbol explanation

εPl Plastic strain

σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

Overall check, LE1

Project:
Project no:
Author:

Strain check, LE1

Equivalent stress, LE1

Anchors

Shape Item Loads Nf V Utt Uts Utts St

Project:
Project no:
Author:
[kN] [kN] [%] [%] [%]
A1 LE1 126.9 20.0 89.2 25.2 92.7 OK
A2 LE1 34.9 13.7 24.5 17.3 15.0 OK
A3 LE1 91.9 13.4 64.5 16.9 53.4 OK
A4 LE1 67.0 7.2 47.1 9.0 30.3 OK
A5 LE1 0.0 20.2 0.0 25.4 10.2 OK
A6 LE1 36.8 16.5 25.8 20.8 17.8 OK
A7 LE1 18.1 13.7 12.7 17.2 8.5 OK
A8 LE1 23.1 9.8 16.2 12.3 7.9 OK

Design data

ϕNsa ϕVsa
Grade
[kN] [kN]
20 A325M - 1 142.3 79.3

Symbol explanation

Nf Tension force
V Resultant of shear forces Vy, Vz in bolt
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕNsa Steel strength of anchor in tension - ACI 318-14 – 17.4.1
ϕVsa Steel strength of anchor in shear - ACI 318-14 – 17.5.1

Weld sections

Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
COL- ◢10.0
BP1 E70xx ◢7.1◣ 174 22 LE1 39.6 48.9 80.9 OK
bfl 1 ◣
◢10.0
E70xx ◢7.1◣ 174 22 LE1 39.8 48.9 81.4 OK
◣
COL-tfl ◢10.0
BP1 E70xx ◢7.1◣ 174 22 LE1 38.4 50.0 76.8 OK
1 ◣
◢10.0
E70xx ◢7.1◣ 175 22 LE1 42.5 42.9 98.9 OK
◣
COL-w ◢10.0
BP1 E70xx ◢7.1◣ 338 23 LE1 39.9 51.9 76.8 OK
1 ◣
◢10.0
E70xx ◢7.1◣ 338 23 LE1 39.0 51.9 75.2 OK
◣

Symbol explanation

Th Throat thickness of weld

Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
ϕRn Weld resistance AISC 360-16 J2.4
Ut Utilization

Concrete block

Item Loads A1 A2 σ Ut Status

Project:
Project no:
Author:
[mm2] [mm2] [MPa] [%]
CB 1 LE1 40997 45417 12.3 68.4 OK

Symbol explanation

A1 Loaded area
A2 Supporting area
σ Average stress in concrete
Ut Utilization

Buckling

Buckling analysis was not calculated.

Code settings
Item Value Unit Reference
Friction coefficient -
0.40 - ACI 349 – B.6.1.4
concrete
Friction coefficient in slip-
0.30 - AISC 360-16 J3.8
resistance
Limit plastic strain 0.05 -
Weld stress evaluation Plastic redistribution
Detailing No
Distance between bolts [d] 2.66 - AISC 360-16 – J3.3
Distance between bolts
1.25 - AISC 360-16 – J.3.4
and edge [d]
Concrete breakout
None
resistance check
Base metal capacity check
No AISC 360-16: J2-2
at weld fusion face
Cracked concrete Yes ACI 318-14 – Chapter 17
Local deformation check No
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Analysis with large
Geometrical nonlinearity
Yes deformations for hollow
(GMNA)
section joints