Sanitary Pipeline Product Recovery

Uni-Bell PVC Pipe Association
ENVIRONMENTAL
PRODUCT DECLARATION
PVC and PVCO Pressure Pipe:
Potable Water, Reuse Water, Sanitary Force Main
PVC Nonpressure Pipe:

Sanitary Sewer and Gravity Storm Water
This document covers PVC and PVCO pressure pipe for potable water,
reuse water, and sanitary force main systems; and PVC nonpressure pipe
for gravity storm water and sanitary sewer systems. All pipes are made in
lengths that are assembled at the job site. Each length has a belled end with
a elastomeric gasket such that each pipe length’s spigot end fits inside the
belled end of the next pipe length.
Verified LCA Conformity to Product Category Rule (PCR-1002) and ISO 14025
ENVIRONMENTAL PRODUCT DECLARATION
EPD Program Operator 2 Date of Issue: March 21, 2023

NSF International Period of Validity: 5 years
789 N. Dixboro Rd. Declaration#: EPD10047
Ann Arbor, MI 48105 USA
www.nsfsustainability.org
ENVIRONMENTAL PRODUCT DECLARATION (EPD) VERIFICATION
EPD Information
Program Operator NSF International
Uni-Bell PVC Pipe Association

Declaration Holder 201 E. John Carpenter Freeway, Suite 750
Irving, TX 75062
Product: Date of Issue: Declaration Number:

Period of Validity: 5 Years
PVC Pipe March 21, 2023 EPD10047
This EPD was independently verified by NSF International

in accordance with ISO 14025:
Internal External Jack Geibig, EcoForm, LLC
[email protected]
This life cycle assessment (LCA) was independently verified in

accordance with ISO 14044, ISO 21930, and the reference Product
Category Rule (PCR). Jack Geibig, EcoForm, LLC
[email protected]
LCA Information
Potable Water, Reuse Water, Gravity Storm Water, Sanitary Force Main
Basis LCA
and Sanitary Sewer Pipe Systems, March, 2022
Cara Vought, Technical Manager
LCA Preparer Sustainable Solutions Corporation
[email protected]
PCR Information
ICC Evaluation Services (ICC-ES)
Program Operator
(https://icc-es.org/environmental-program/)
Product Category Rules for Rigid and Flexible Building Piping Systems
Reference PCR
in North America (PCR-1002)
Date of Issue 02-01-2019
Greg Johnson – Johnson & Associates Consulting Services
PCR review was conducted by: Allan Bilka, R.A. – Senior Staff Architect, ICC
Mark Reddin – Uponor
This document is intended for Business-to-Customer (B2C) applications. EPDs according to different PCR documents
or programs may not be comparable. The details within this document represent industry-averaged performance and
data. Only EPDs that are prepared from cradle-to-grave life cycle results and based on the same function, reference
service life (RSL) quantified by the same functional unit, and meeting all the conditions in ISO 14025, Section 6.7.2
shall be permitted to be used to assist purchasers and users in making informed comparisons between products.

EXECUTIVE SUMMARY
PVC pipe has low cradle-to-grave environmental impacts. For pressure pipe, the most important drivers for environmental
impacts are pipe installation and use phase. Although the use phase has the largest impact on the life cycle, PVC pipe
is designed to minimize use-phase impacts due to the smooth surface of the pipe wall that reduces the frictional energy
loss from pumping pressurized water through the system. For nonpressure pipe, installation of pipe is the primary driver
of impacts. For both pressure and nonpressure pipe, PVC resin is a significant contributor. It is important to realize
that PVC pipe’s use phase is not impacted by decline of pipe properties, since PVC’s hydraulic characteristics do not
deteriorate with age.
There has been an overall 6% reduction of embodied carbon and most other environmental impacts compared to the
2015 EPD, owing to improvements in PVC pipe manufacturing and upstream production of PVC resin. This reduction
does not include use phase impacts from pumping, since it is not included in embodied energy carbon calculations. Also,
there was a 20% reduction in electricity use during the extrusion process, as well as a 66% reduction in water use during
PVC pipe manufacturing. Electricity is the dominant driver in manufacturing, so any reductions here are significant for
the manufacturing stage. Efforts by the participating manufacturers to reduce their impacts include production increases,
energy efficiency projects, and increased water tracking and reuse.
SUMMARY OF EMBODIED CARBON AND ENERGY

The following table provides a summary of the cradle-to-gate embodied carbon (that is, the A1-A3 global warming
potential) as well as the cradle-to-gate embodied energy (cumulative energy demand) of the products. Please note that the
embodied energy includes renewable and non-renewable energy sources used for fuel as well as for feedstock materials.
For further breakdown among energy sources, please see each use of resources tables per product.
TABLE 1: SUMMARY OF EMBODIED CARBON AND ENERGY

Embodied Carbon Embodied Energy
Product
A1-A3 A1-A3
kg CO2 eq / 1,000 ft MJ / 1,000 ft
8” DR 18 AWWA C900 9.10E+03 2.64E+05
8” DR 25 AWWA C900 6.70E+03 1.95E+05
24” DR 25 AWWA C900 5.89E+04 1.69E+06
8” PC 235 AWWA C909 6.38E+03 1.79E+05
24” PS 46 (Profile) ASTM F794 / AASHTO M304 3.19E+04 9.34E+05
8” PS 46 (Profile) ASTM F794 2.67E+03 7.71E+04
8” DR 35 ASTM D3034 4.31E+03 1.18E+05
24” PS 46 ASTM F679 3.06E+04 8.88E+05

ADDITIONAL ENVIRONMENTAL INFORMATION

Environmental and Health During Manufacture:
There are no known environmental or health concerns associated with the physical manufacture of PVC pipe.
Additionally, no known per- and polyfluoroalkyl substances (PFAS) are associated with PVC pipe production.
Environmental and Health During Installation:

There are no known environmental or health concerns related to installation of PVC pipe.
Environmental and Health During Use:

PVC pipe and fittings are resistant to chemicals generally found in water and sewer systems, preventing any leaching
or releases to ground and surface water during the use of the piping system. No known chemicals are released
internally into the water system. No known toxicity effects occur in the use of the product. Additionally, no known
microplastics are associated with PVC pipe use.
Extraordinary Effects:
There are no known, relevant, extraordinary effects from water, fire, or mechanical destruction of these products. This
includes wildfires, which do not impact PVC water and sewer infrastructure pipe since it is buried underground, insulated
from heat generated above ground. Pressure and nonpressure pipe are designed to meet performance characteristics as
cited in specific standards defined in the Product Description section. Any relevant testing data may be requested from
individual manufacturers.
DISCLAIMER
This EPD was not written to support comparative assertions. Even for similar products, EPD results might not
be comparable because of differences in data quality, functional units, use, and end-of-life stage assumptions.
It is not recommended to compare EPDs with another organization as there may be differences in methodology,
assumptions, allocation methods, data quality such as variability in datasets, and results of variability in assessment
software tools used. This declaration represents an average performance based on production values of an industry-
wide study for a calendar year.

PRODUCT DESCRIPTION
FIGURE 1: IMAGE OF PVC PIPE The PVC pipe industry recognizes the benefits of
communicating credible, science-based, and transparent
environmental information about its products. This EPD
covers cradle-to-grave impacts of municipal piping systems
in North America using a functional unit of 1,000 feet for
eight different pipe products, used in various applications, to
assist with measuring and understanding the environmental
impacts of PVC pipe across the life cycle. The eight PVC pipe
products examined are used for both pressure applications
(potable water pipes, reuse water pipes, and sanitary force
mains), and nonpressure applications (sanitary sewer and
gravity storm water). These products are listed in Table 2.
Explanatory materials regarding product information may
be found at uni-bell.org.
TABLE 2: PRODUCTS INCLUDED IN STUDY

Dimension Ratio/ Product Mass of
Application Standard Nominal Diameter
Pipe Stiffness Functional Unit
Pressure Pipe AWWA C9001 8 in. DR 18 3,974 kg/1,000 ft
Pressure Pipe AWWA C909 2
8 in. PC 235 2,499 kg/1,000 ft
ASTM F794 / 3
Storm Water 24 in. (profile wall) PS 46 14,211 kg/1,000 ft
AASHTO M3044
Storm Water ASTM F794 8 in. (profile wall) PS 46 1,228 kg/1,000 ft
Sanitary Sewer ASTM D30345 8 in. (solid wall) DR 35 1,931 kg/1,000 ft
Sanitary Sewer ASTM F6796 24 in. (solid wall) PS 46 16,343 kg/1,000 ft
1
AWWA C900 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 60 In. (100 mm Through 1,500 mm). 2022.
2
AWWA C909 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. (100mm) and Larger. 2022.
3
ASTM F794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter. 2021.
4
AASHTO M304 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter. 2011.
5
ASTM D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings. 2021.
6
ASTM F679 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings. 2021.

FUNCTIONAL UNIT
The environmental impacts are reported per functional unit of a product, and the functional unit is the basis for comparison
in an LCA. For PVC pipe, the functional unit for this EPD is 1,000 feet of installed pipe with belled ends every 20 feet
for every 8- and 24-inch pipe, over a 50-year building life. Per the Product Category Rule (PCR), a building service life is
assumed at 50 years; however, PVC pipe used for water and sewer infrastructure is designed to service systems for 100
years. In fact, research studies, and dig-ups after 70 years of use confirm that PVC pipe lasts in excess of 100 years.7,8 For
this EPD, the pumping energy required to pump water through the pipe during the use stage is considered for 50 years.
Per the PCR, fittings must also be included. As these piping systems are belled, fittings are not required to join the pipes
together and are only used as needed for a project installation. A typical PVC water or sewer pipe system uses far fewer
fittings than required for this PCR. However, for the purposes of this EPD, 258 fittings were assumed as required by the PCR
standard for pressure pipe systems and 234 fittings were used for sanitary sewer. These values are reported in a separate
Appendix at the end of this document as systems are variable in the number and type of fittings required.
MANUFACTURING LOCATIONS
This study uses data from Uni-Bell PVC Pipe Asssociation (PVCPA) members including seven manufacturers and 35 facilities
representing roughly 90% of municipal water and sewer PVC pipe product capacity in the United States and Canada. The
participating manufacturers are listed in Table 3 and shown on a map in Figure 2. PVCPA is the non-profit trade association
representing North America’s PVC water and sewer infrastructure pipe manufacturers. The Association is the authoritative
source on PVC pipe and has served the engineering, regulatory, public health, and standardization communities since
1971.
TABLE 3: PARTICIPATING PVC PIPE FIGURE 2: PVC PIPE LCA STUDY

MANUFACTURERS PARTICIPANTS’ MANUFACTURING LOCATIONS
Diamond Plastics Corporation
IPEX, Inc.
Jet Stream by PipeLife
JM Eagle Corporation
National Pipe & Plastics Corporation
Sanderson Pipe Corporation
Westlake Pipe & Fittings
7
Folkman, Steven. PVC Pipe Longevity Report: Affordability & the 100+ Year Benchmark Standard. Utah State University Buried Structures Laboratory.
May 2014.
8
Burn, S. et. al., “Long-term Performance Prediction for PVC Pipes,” AWWARF Report 91092F, May 2006.

SYSTEM BOUNDARY TABLE 4: SYSTEM BOUNDARY

The system boundary of this EPD is cradle-to-grave. This
Raw Material
project considers the life cycle activities from resource A1 X
Extraction and Processing
extraction through installation and end-of-life effects. The
boundary covers the product, construction process, use, Product Transport A2 X
and end-of-life stages, as seen in Table 4. Capital goods
and infrastructure flows have been excluded from the unit Manufacturing A3 X
processes used to model the LCIA, as these goods do not Transport A4 X
significantly impact the LCA. Construction
Installation Construction/Installation A5 X
MATERIAL CONTENTS Use B1 X

PVC pipe compound ingredients are given in the units Maintenance B2 X
Parts per Hundred Resin (PHR). This means that for every
100 pounds of resin, the PHR amount should be added Repair B3 X
to the compound when mixing. This ensures consistency
Use Replacement B4 X
throughout the industry. The industry average PVC pipe
formations are listed in Table 5. Any hazardous or toxic Refurbishment B5 X
materials or any substances that were intentionally added
to the product system were considered and included in the Operational Energy Use B6 X
life cycle inventory. Operational Water
B7 X
Use
Deconstruction/
C1 X
Demolition
Transport C2 X
End-of-Life
Waste Processing C3 X
Disposal C4 X
Benefits of Reuse D MND

Loads Beyond
Recovery D MND
the System
Boundary Recycling D MND
*MND = module not disclosed

TABLE 5: AVERAGE PVC PIPE PRODUCT FORMULATIONS (A1)

Parts per Hundred Resin (PHR)
ASTM F794
AWWA ASTM ASTM ASTM
Product Recipe AWWA C900 / AASHTO
C909 F794 D3034 F679
M304
8” 8” 24” 8” 24” PS 46 8” PS 46 8” 24”
DR 18 DR 25 DR 25 PC 235 Profile Profile DR 35 PS 46
PVC 100 100 100 100 100 100 100 100
Stabilizer 0.59 0.56 0.64 0.50 0.61 0.50 0.54 0.57
Titanium Dioxide 1.03 1.28 0.78 0.55 0.17 0.19 0.89 0.74
Calcium Carbonate 4.96 3.90 5.09 5.30 13.57 9.94 16.71 23.10
Pigments/Colorants 0.15 0.15 0.08 0.03 0.64 0.59 0.32 1.61
Calcium Stearate 0.77 0.80 0.88 0.40 0.54 0.61 6.05 0.89
Polyethylene Wax 0.30 0.07 0.18 0.19 0.18 0.20 0.31 0.27
Wax 0.99 0.47 1.32 0.94 1.36 1.46 1.00 1.01
Combined Wax 0.24 0.33 0.09 — — — 0.18 0.07
Impact Modifier — — — — 0.28 — 0.03 —
Processing Aid — — 0.12 — 0.32 — — —
Recycled PVC — — — — — — 3.43 —
Total 109 108 109 108 118 113 129 128
Total Weight (kg/1,000 ft) 3,970 2,900 24,030 2,500 14,210 1,230 1,930 16,350
*Please note that the parts per hundred value by ingredient may be divided by the total parts to determine the percentage in the formulation.
Fitting formulations are considered to be similar; formulations are similar for C900 fittings with the weight of a fitting
being 12.5 lbs (5.7 kg) or 130 lbs (59 kg) for an 8- and 24-inch pressure pipe, respectively. For sanitary sewer and storm
water, 8-inch fittings are assumed to be 4.5 lbs (2.0 kg) and 24-inch fittings are assumed to be 60 lbs (27.2 kg) per piece.
Packaging materials are pallets with other procedural materials, such as paper labels. The main components of the pallets
are wood, metal, plastic, cardboard, and paper. Packaging amounts are provided in Table 7.

MANUFACTURING
The production process begins when the raw materials are blended together, after which the compound flows into an
electrically heated extruder. The compound passes through a die at the end of the extruder, where it is formed into a pipe
shape. The pipe then moves through a sizing sleeve that provides dimensional accuracy. Solid-wall pipe is then water
cooled, cut to length, and labeled as the pipe moves to the end of the production line. PVCO pipe has an additional step
to form it to the final dimensions. Profile-wall pipe undergoes additional processing to form the profile shape. At the end
of the production line, the pipe is belled and pressure tested (for pressure-class pipe). The pipe is then packaged and
prepared for shipment from the manufacturing facility. The packaging is typically a set of wooden frames that hold the
bundle of pipes together. Packaged pipe is loaded onto trucks for shipping. Figure 3 details the process flow.
FIGURE 3: PVC PIPE MANUFACTURING PROCESS
Raw Orienting
Compound
Materials Extruding (PVCO Pipe Cutting
Mixing
Storage Only)
Hydrotesting
Belling (Pressure Packaging Shipping
Pipe Only)

DISTRIBUTION
The final PVC pipes are shipped throughout North America. Each participating facility provided average transportation
distances for the products investigated in this study. A weighted average was taken for each product in this study as seen
in Table 6. All manufacturing facilities ship the PVC pipe via truck.
TABLE 6: TRANSPORT TO THE CONSTRUCTION SITE (A4)

8” 8” 24” 8” 24” 8” 8” 24”
Product Unit DR 18 DR 25 DR 25 PC 235 PS 46 PS 46 DR 35 PS 46
C900 C900 C900 C909 Profile Profile D3034 F679
Fuel Type Diesel
Vehicle Type Truck

Average Transport
km 461 430 416 762 614 655 475 263
Distance
% by
Capacity Utilization 90 90 90 90 90 90 90 90
mass
Weight of Pipe
kg 3,970 2,900 24,030 2,500 14,210 1,230 1,930 16,350
Products Transported
Weight of Pipe
kg 1,463 1,463 15,213 1,463 6,368 478 478 6,368
Fittings Transported
Volume of Pipe
m3 21.2 21.2 56.6 21.2 56.6 21.2 21.2 56.6
Products Transported
INSTALLATION
The vast majority of PVC pipe is installed via open-cut; however, PVC pipe can also be installed via trenchless methods.
For the purposes of this EPD, only open-cut installation methods were considered. Alternative installation methods would
change EPD values. Installation of PVC pipe is assumed to be similar to other open-cut pipe installation, requiring the
digging and refilling of a trench. The trench depth and time required to dig and refill it varies widely per region, soil type,
climate, existing infrastructure, equipment operator, local convention, and other factors, so the actual installation time and
effort is widely variable. For 8-inch pipe, the trench width used was at least 24 inches. For 24-inch pipe, the trench width
extended at least 36 inches. Typically, a hydraulic digger is used to dig the trench, and a small loader refills the trench. After
installation, any packaging for the product is discarded.

FIGURE 4: TRENCH CROSS-SECTION DIAGRAM
Two scenarios were identified for this study. The first scenario represents a trench depth of 4 feet for the 8-inch diameter
pipe, with an estimated 15 hours of machine runtime for 1,000 feet of pipe. The second scenario represents a trench depth
of 10 feet for the 24-inch diameter pipe, with an estimated 25 hours of machine runtime for 1,000 feet of pipe.

INSTALLATION cont.
Diesel fuel usage rates are estimated to be 8 gallons/hour (30.3 liters/hour) for the digger9 and 2 gallons/hour (7.6 liters/
hour) for the loader 10. Therefore the 15-hour baseline scenario assumes 150 gallons (567.8 liters) of diesel is required to
install 1,000 feet of pipe. The longer 25-hour scenario assumes 360 gallons (1,362.8 liters) of diesel is required to install
1,000 feet of pipe. No shoring was considered. Gravel and sand were assumed to be used in the bedding and haunching
of the trench, per the Handbook of PVC Pipe: Design & Construction manual. A combined bulk density of 120 lb/ft3 was
assumed.11 Not all pipe installations require bedding, and most pressure pipe installations can use native soil. According
to these scenarios and the functional unit of the products, 30 hours of labor have been assumed for the installation phase.
TABLE 7: CONSTRUCTION / INSTALLATION ASSUMPTIONS (A5)

8” 8” 24” 8” 24” 8” 8” 24”
Product Unit DR 18 DR 25 DR 25 PC 235 PS 46 PS 46 DR 35 PS 46
C900 C900 C900 C909 Profile Profile D3034 F679
Ancillary Materials
Gravel t 61.9 61.9 80 61.9 80 61.9 61.9 80
Sand t 12.4 12.4 16.2 12.4 16.2 12.4 12.4 16.2
Disinfectant kg 0.32 0.32 2.6 0.32 n/a n/a n/a n/a
Net Freshwater
m3 10.4 10.4 10.4 10.4 n/a n/a n/a n/a
Consumption
Diesel gal 150 150 366 150 366 150 150 366
Electricity kWh 0.3 0.3 13.0 0.3 n/a n/a n/a n/a
Other Energy
MJ n/a n/a n/a n/a n/a n/a n/a n/a
Carriers
Product Loss kg 199 145 1,202 125 711 61 97 817
Waste Materials kg 199 145 1,202 125 711 61 97 817
Output Materials
kg 199 145 1,202 125 711 61 97 817
(Landfill)
Packaging Materials
Paper kg 3.19E-02 4.56E-02 2.28E-01 1.99E-01 3.48E+00 9.94E-01 4.94E-03 3.67E+00
Plastic kg 5.93E+00 6.11E+00 5.26E+01 2.94E+01 5.00E+00 7.91E-01 1.98E+00 1.09E+01
Cardboard kg 3.03E-02 1.68E-02 1.90E-01 0.00E+00 1.07E-02 4.06E-03 1.81E-02 8.85E-02
Metal kg 4.91E-01 3.14E-01 6.88E+00 1.97E+00 8.21E+00 1.04E+00 3.36E-01 2.42E+00
Wood kg 5.80E+01 7.15E+01 1.43E+02 3.57E+02 3.47E+02 2.69E+01 1.72E+01 6.00E+01
Biogenic Carbon
Contained in kg CO2 1.06E+02 1.31E+02 2.62E+02 6.54E+02 6.35E+02 4.93E+01 3.16E+01 1.10E+02
Packaging
Direct Emissions kg n/a n/a n/a n/a n/a n/a n/a n/a
VOC Emissions kg n/a n/a n/a n/a n/a n/a n/a n/a
9
Forum on Heavy Equipment. https://www.heavyequipmentforums.com/showthread.php?5804-Fuel-Consumption. Accessed March 2013.
10
Forum on Forestry Forum. https://www.forestryforum.com/board/index.php?topic=14063.0. Accessed March 2013.
11
SI Metric. Density of Dry Material Table. https://www.simetric.co.uk/si_materials.htm. Accessed September 25, 2013.

REFERENCE SERVICE LIFE

The following assumptions were made for this study.
TABLE 8: REFERENCE SERVICE LIFE

Subject Unit Potable Water Storm Water Sanitary Sewer
Reference Service Life (RSL) Years 50 50 50
Estimated Service Life (ESL) Years 100 100 100
Declared Product Properties

Design Application Parameters Click here for resources Click here for resources
& Use Conditions on installation practices for on installation practices for
Quality of Work PVC pressure pipe. PVC nonpressure pipe.
Outdoor Environment
Indoor Environment n/a n/a n/a
Water Loss Liters — — —
Number of Replacements # 0 0 0
Please refer to the maintenance guides provided by the

Maintenance
manufacturer, or on PVCPA’s resource page.
USE
It is assumed that replacements or repairs of pipes will not be necessary during the course of 50 years, which is the service
life per the PCR. In pressure-pipe systems, pumping energy is required to overcome friction between the pipe wall and
the flowing fluid. To calculate the amount of energy required of the pumps for the friction head from the PVC pipe, the
following assumptions were made. Note that 8,760 annual operating hours equal 24-hour, 365-day pumping.

The friction head loss through 1,000 feet of

TABLE 9: OPERATIONAL USE ASSUMPTIONS pipe was calculated using the Hazen-Williams
Parameter Value equation. The assumed PCR service life is 50
years; however, the pipe product’s estimated
Water Flow Velocity in PVC Pipe 2 feet/second
service life is actually longer and designed
Pump Efficiency 75% for 100 years. The selected service life used
Operating Hours Per Year 8,760 in the project reflects the PCR requirements;
however, industry experts and studies by Utah
Length of Pipe 1,000 feet State University13 as well as the American
Elevation Increase 0 feet Water Works Association and Water Research
Foundation (AWWARF)14 confirm that PVC pipe
Hazen-Williams Coefficient for PVC 15012
has a service life in excess of 100 years.
TABLE 10: OPERATIONAL ENERGY USE CALCULATION RESULTS FOR C900 & C909 PVC PIPES
Product 8” DR 18 C900 8” DR 25 C900 24” DR 25 C900 8” PC 235 C909
Hazen-Williams Coefficient 150 150 150 150
Inside Diameter (inch) 8.04 8.33 23.74 8.44
Flow Rate (gpm) at 2 ft/s velocity 317 339 2,758 349
Pumping Energy (kWh/yr) 1,150 1,190 2,860 1,200
Operational Energy Use for 50 years (MJ) 20,700 21,420 51,480 21,600
END-OF-LIFE
While products are traditionally left in the ground, this study assumes that piping systems are replaced after their reference
service life with a new piping system. However, most water and sewer systems are left in place without removal. For
deconstruction, no additional energy was assumed as typically when pipe is actively removed a replacement system is
being installed; therefore, the installation energy of the next system would capture any removal of a piping system. To
avoid double counting of diesel impacts, all energy is assumed in the installation of the new system. PVC pipe is 100%
recyclable so if the product is removed from the ground after its service life the preferred end-of-life is recycling. PVC
pipe can be recycled back into itself up to eight times without a reduction in mechanical properties. However, owing to its
longevity, most of it has yet to enter the recycling stream. Disposal in a municipal landfill is permissible and should be done
in accordance with local, state, and federal regulations. For this study, disposal was modeled in compliance with the PCR
and is not a significant contributor to environmental impacts.
12
Handbook of PVC Pipe: Design and Construction. Fifth Edition. Uni-Bell. (2012) 9.7.
13
Folkman, Steven. PVC Pipe Longevity Report: Affordability & the 100+ Year Benchmark Standard. Utah State University Buried Structures Laboratory.
May 2014.
14
Burn, S. et. al., “Long-term Performance Prediction for PVC Pipes,” AWWARF Report 91092F, May 2006.

TABLE 11: END-OF-LIFE ASSUMPTIONS (C1-C4)

8” DR 18 8” DR 25 24” DR 25 8” PC 235
Product Unit
C900 C900 C900 C909
Collected Separately (Pipe) kg 3,974 2,900 24,036 2,499

Collection Collected Separately (Fittings) kg 1,463 1,463 15,213 1,463
Process
Collected with Mixed
kg n/a n/a n/a n/a
Construction Waste
Distance Traveled to Disposal km 50 50 50 50
Reuse kg n/a n/a n/a n/a
Recycling kg n/a n/a n/a n/a
Landfill (Pipe) kg 3,974 2,900 24,036 2,499

Recovery
Landfill (Fittings) kg 1,463 1,463 15,213 1,463
and Disposal
Incineration kg n/a n/a n/a n/a
Incineration (with Energy Recovery) kg n/a n/a n/a n/a
Energy Conversion kg n/a n/a n/a n/a
Removals of Biogenic Carbon kg n/a n/a n/a n/a
24” PS 46 8” PS 46 8” DR 35 24” PS 46
Product Unit
Profile Profile D3034 F679
Collected Separately (Pipe) kg 14,211 1,228 1,931 16,343

Collection Collected Separately (Fittings) kg 6,368 478 478 6,368
Process
Collected with Mixed
kg n/a n/a n/a n/a
Construction Waste
Distance Traveled to Disposal km 50 50 50 50
Reuse kg n/a n/a n/a n/a
Recycling kg n/a n/a n/a n/a
Landfill (Pipe) kg 14,211 1,228 1,931 16,343

Recovery
Landfill (Fittings) kg 6,368 478 478 6,368
and Disposal
Incineration kg n/a n/a n/a n/a
Incineration (with Energy Recovery) kg n/a n/a n/a n/a
Energy Conversion kg n/a n/a n/a n/a
Removals of Biogenic Carbon kg n/a n/a n/a n/a

METHODOLOGY
Allocation: Per production mass at each facility; a weighted average based on production totals among manufacturers was
conducted.
Cut-Off Rules: Cut-off rules were followed as defined by ISO 14044. All known flows were included in the system boundary,
and no flows were excluded. No hazardous and toxic materials are added to the piping systems; any hazardous substances
were considered and included in the life cycle inventory. The following items were cut-off using the cut-off criteria listed in
the PCR:
• Construction of capital equipment
• Maintenance of operation and support equipment
• Human labor and employee commute
• Casings for pipe installed under structures
• Shoring, soil compaction during installation of pipe
Data Sources: ecoinvent v3.7 and US LCI
Data Quality:
• Primary Data: 2019 calendar year
• Secondary Data: Representative of North America, based on the ecoinvent v3.7 recycled content database and
the US LCI datasets, with datasets developed or updated within 10 years.
o Vinyl resin data was leveraged from the 2021 published LCA study by Franklin Associates (a divison
of ERM) as published in the Federal LCA Commons and US LCI database.
• Secondary data were evaluated with regards to precision, completeness, consistency, reproducibility,
representativeness, and uncertaintly. Based on these criteria, the data quality used throughout this study is
considered high.
Software: SimaPro v9.3
Period Under Review: Data from 2019 was collected and average based on production from each participating facility.
Estimates and Assumptions:
• Products are assumed to travel 500 miles in a diesel-powered truck to the building site.
• Manual installation occurs with a 5% scrap rate.
• Underground pipe is predominantly left in the ground at the end of the service life and not recovered for disposal
in a landfill or incinerator nor recycled.

LIFE CYCLE IMPACT ASSESSMENT (LCIA)

The impact categories analyzed for this EPD include: global warming potential, ozone depletion, acidification, eutrophication,
and smog formation. The TRACI 2.1 version 4.1 and CML impact assessment methodologies were used to calculate the
environmental impacts in this LCA.
PRESSURE PIPE: 8” DR 18 AWWA C900
TABLE 12: 8” DR 18 AWWA C900 LIFE CYCLE IMPACT ASSESSMENT

Disposal
Product Stage Construction Stage Use Stage
Unit Stage
TRACI v2.1
(per 1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
GWP kg CO2 eq 7.94E+03 1.28E+02 1.04E+03 1.69E+02 2.52E+03 2.72E+04 3.92E+01
Potential
Depletion
Potential of the
ODP kg CFC-11 eq 1.30E-03 4.87E-09 7.43E-05 6.45E-09 5.48E-05 2.10E-03 9.02E-06
Stratospheric
Ozone Layer
Acidification
AP kg SO2 eq 6.65E+01 1.83E+00 2.89E+00 1.01E+00 2.86E+01 6.88E+01 4.24E-01
Potential
Eutrophication
EP kg N eq 3.56E+00 1.10E-01 3.39E+00 5.62E-02 3.17E+00 8.20E+01 4.95E-02
Potential
Photochemical
POCP Ozone Creation kg O3 eq 3.43E+02 5.86E+01 4.37E+01 2.76E+01 8.42E+02 1.12E+03 1.08E+01
Potential
Disposal
Product Stage Construction Stage Use Stage
Unit Stage
CML 2 Baseline 2001
(per 1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
AP kg SO2 eq 7.35E+01 1.40E+00 2.68E+00 8.33E-01 2.22E+01 6.17E+01 3.39E-01
Potential
Eutrophication
EP kg PO4 eq 2.91E+00 3.10E-01 1.62E+00 1.48E-01 5.13E+00 4.00E+01 7.38E-02
Potential
Photochemical
POCP Ozone Creation kg C2H4 eq 4.05E+00 3.13E-02 1.46E-01 3.84E-02 7.78E-01 3.18E+00 -3.43E-02
Potential
Abiotic Depletion
ADPF Potential for MJ 2.39E+05 1.64E+03 1.35E+04 2.17E+03 3.39E+04 3.56E+05 8.47E+02
Fossil Resources

TABLE 13: 8” DR 18 AWWA C900 USE OF RESOURCES

Disposal
Unit (per Product Stage Construction Stage Use Stage
Use of Resources Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Non-renewable Primary
NRPRE Resources Used as an MJ 2.36E+05 1.64E+03 1.92E+04 2.17E+03 3.62E+04 5.15E+05 8.53E+02
Energy Carrier
Renewable Primary
RPRE Resources Used as an MJ 1.54E+03 0.00E+00 1.16E+03 0.00E+00 4.81E+02 4.88E+04 4.69E+00
Energy Carrier
NRPRM Resources with Energy kg 3.96E+03 0.00E+00 2.36E+02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Content Used as a
Material
Renewable Primary
Resources with Energy
RPRM kg 1.10E+03 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Content Used as a
Material
Use of Secondary
SM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials
Renewable Secondary
RSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Fuels
Use of Non-renewable
NRSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Secondary Fuels
Fresh Water
FW m3 2.62E+01 0.00E+00 4.15E+00 0.00E+00 2.34E+02 1.03E+02 6.19E-01
Consumption
NRN Non-renewable Nuclear MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
TABLE 14: 8” DR 18 AWWA C900 OUTPUT FLOWS

Disposal
Parameter Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Disposed-of Hazardous
HWD kg 0.00E+00 0.00E+00 9.46E-02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
Disposed-of Non-
NHWD kg 0.00E+00 0.00E+00 2.94E+01 0.00E+00 2.10E+02 0.00E+00 3.96E+03
Hazardous Waste
Disposed-of Radioactive
RWD kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
CRU Components for Reuse kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
MFR Materials for Recycling kg 0.00E+00 0.00E+00 2.07E+01 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials for Energy
MET kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Recovery
Exported Electrical
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Energy (Waste to Energy)
Exported Thermal
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
BBPr Bio-Based Products kg CO2 eq 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
BBPk Bio-Based Packaging kg CO2 eq -5.79E+01 0.00E+00 0.00E+00 0.00E+00 5.79E+01 0.00E+00 0.00E+00


Use Stage Disposal
Product Stage Construction Stage
Unit (per Stage
TRACI v2.1
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
EP kg N eq 2.80E+00 1.84E-01 2.90E+00 3.81E-02 3.09E+00 8.48E+01 3.59E-02
Potential
Photochemical
Potential
Construction Stage Use Stage Disposal

Product Stage
Unit (per Stage
CML 2 Baseline 2001
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
EP kg PO4 eq 2.22E+00 3.87E-01 1.36E+00 9.98E-02 5.10E+00 4.14E+01 5.35E-02
Potential
Photochemical
Potential
Abiotic Depletion
Fossil Resources


Disposal
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Energy Carrier
Renewable Primary
Energy Carrier
Content Used as a
Material
Renewable Primary
RPRM kg 1.34E+02 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Content Used as a
Material
Use of Secondary
SM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials
Renewable Secondary
RSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Fuels
NRSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Secondary Fuels
Fresh Water
FW m3 1.93E+01 3.26E-01 2.88E+00 0.00E+00 1.29E+02 1.06E+02 4.48E-01
Consumption

Disposal
Parameter Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
HWD kg 0.00E+00 0.00E+00 6.85E-02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
Disposed-of Non-
NHWD kg 0.00E+00 0.00E+00 2.13E+01 0.00E+00 1.57E+03 0.00E+00 2.87E+04
Hazardous Waste
RWD kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
MET kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Recovery
Exported Electrical
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Exported Thermal
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00


Use Stage Disposal
Unit (per Stage
TRACI v2.1
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
AP kg SO2 eq 4.01E+02 2.13E+01 2.73E+01 5.54E+00 6.63E+01 1.71E+02 2.58E+00
Potential
Eutrophication
EP kg N eq 2.05E+01 1.80E+00 3.54E+01 3.09E-01 6.32E+00 2.04E+02 3.01E-01
Potential
Photochemical
Potential

Product Stage
Unit (per Stage
CML 2 Baseline 2001
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
AP kg SO2 eq 4.43E+02 1.64E+01 2.58E+01 4.57E+00 5.08E+01 1.53E+02 2.06E+00
Potential
Eutrophication
EP kg PO4 eq 1.72E+01 3.73E+00 1.66E+01 8.10E-01 1.17E+01 9.94E+01 4.48E-01
Potential
Photochemical
POCP Ozone Creation kg C2H4 eq 2.44E+01 4.15E-01 1.32E+00 2.11E-01 1.76E+00 7.90E+00 -2.08E-01
Potential
Abiotic Depletion
Fossil Resources


Disposal
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Energy Carrier
Renewable Primary
Energy Carrier
Content Used as a
Material
Renewable Primary
RPRM kg 2.72E+03 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Content Used as a
Material
Use of Secondary
SM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials
Renewable Secondary
RSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Fuels
NRSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Secondary Fuels
Fresh Water
FW m3 1.54E+02 3.36E+00 4.42E+01 0.00E+00 2.71E+02 2.56E+02 3.76E+00
Consumption

Disposal
Parameter Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
HWD kg 0.00E+00 0.00E+00 5.74E-01 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
Disposed-of Non-
NHWD kg 0.00E+00 0.00E+00 1.78E+02 0.00E+00 1.40E+03 0.00E+00 2.40E+04
Hazardous Waste
RWD kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
MET kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Recovery
Exported Electrical
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Exported Thermal
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00

PRESSURE PIPE: 8” PC 235 AWWA C909
TABLE 21: 8” PC 235 AWWA C909 LIFE CYCLE IMPACT ASSESSMENT

Use Stage Disposal
Unit (per Stage
TRACI v2.1
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
EP kg N eq 1.61E+00 5.18E+00 3.75E-01 5.87E-02 3.17E+00 8.55E+01 3.12E-02
Potential
Photochemical
Potential

Product Stage
Unit (per Stage
CML 2 Baseline 2001
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
EP kg PO4 eq 1.54E+00 2.59E+00 2.65E-01 1.54E-01 5.13E+00 4.17E+01 4.66E-02
Potential
Photochemical
Potential
Abiotic Depletion
Fossil Resources

TABLE 22: 8” PC 235 AWWA C909 USE OF RESOURCES

Disposal
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Energy Carrier
Renewable Primary
Energy Carrier
Content Used as a
Material
Renewable Primary
RPRM kg 1.17E+02 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Content Used as a
Material
Use of Secondary
SM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials
Renewable Secondary
RSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Fuels
NRSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Secondary Fuels
Fresh Water
FW m3 1.48E+01 6.36E+00 1.91E+00 0.00E+00 2.34E+02 1.07E+02 3.91E-01
Consumption
TABLE 23: 8” PC 235 AWWA C909 OUTPUT FLOWS

Disposal
Parameter Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
HWD kg 0.00E+00 0.00E+00 5.97E-02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
Disposed-of Non-
NHWD kg 0.00E+00 0.00E+00 1.85E+01 0.00E+00 5.13E+02 0.00E+00 2.50E+03
Hazardous Waste
RWD kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
MET kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Recovery
Exported Electrical
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Exported Thermal
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00

STORM WATER PIPE: 24” PS 46 ASTM F794 / AASHTO M304 (PROFILE WALL) PVC PIPE
TABLE 24: 24” PS 46 ASTM F794 / AASHTO M304 (PROFILE WALL) LIFE CYCLE IMPACT ASSESSMENT
Use Stage Disposal

Unit (per Stage
TRACI v2.1
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
ODP kg CFC-11 eq 4.26E-03 2.02E-06 2.02E-04 3.09E-08 1.04E-04 0.00E+00 3.24E-05
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
EP kg N eq 8.10E+00 1.29E+00 1.16E+01 2.69E-01 6.22E+00 0.00E+00 1.24E-01
Potential
Photochemical
Potential

Product Stage
Unit (per Stage
CML 2 Baseline 2001
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
Potential
Photochemical
POCP Ozone Creation kg C2H4 eq 1.30E+01 4.37E-01 4.38E-01 1.84E-01 1.73E+00 0.00E+00 2.18E-02
Potential
Abiotic Depletion
Fossil Resources

TABLE 25: 24” PS 46 ASTM F794 / AASHTO M304 (PROFILE WALL) USE OF RESOURCES
Disposal
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Energy Carrier
Renewable Primary
Energy Carrier
Content Used as a
Material
Renewable Primary
RPRM kg 6.59E+03 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Content Used as a
Material
Use of Secondary
SM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials
Renewable Secondary
RSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Fuels
NRSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Secondary Fuels
Fresh Water
FW m3 8.95E+01 2.60E-01 1.37E+01 0.00E+00 1.52E+02 0.00E+00 2.22E+00
Consumption
TABLE 26: 24” PS 46 ASTM F794 / AASHTO M304 (PROFILE WALL) OUTPUT FLOWS
Disposal
Parameter Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
HWD kg 0.00E+00 0.00E+00 3.40E-01 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
Disposed-of Non-
NHWD kg 0.00E+00 0.00E+00 1.05E+02 0.00E+00 1.07E+03 0.00E+00 1.42E+04
Hazardous Waste
RWD kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
MET kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Recovery
Exported Electrical
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Exported Thermal
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00

SANITARY SEWER PIPE: 8” PS 46 ASTM F794 (PROFILE WALL) PVC PIPE
TABLE 27: 8” PS 46 ASTM F794 (PROFILE WALL) LIFE CYCLE IMPACT ASSESSMENT
Use Stage Disposal
Unit (per Stage
TRACI v2.1
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
AP kg SO2 eq 1.86E+01 2.15E+00 8.01E-01 4.83E+00 6.60E+01 0.00E+00 6.25E-01
Potential
Eutrophication
EP kg N eq 6.57E-01 1.31E-01 1.03E+00 2.69E-01 6.22E+00 0.00E+00 1.24E-01
Potential
Photochemical
Potential

Product Stage
Unit (per Stage
CML 2 Baseline 2001
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
AP kg SO2 eq 2.06E+01 1.69E+00 7.40E-01 3.99E+00 5.06E+01 0.00E+00 5.32E-01
Potential
Eutrophication
EP kg PO4 eq 6.69E-01 3.45E-01 4.91E-01 7.06E-01 1.16E+01 0.00E+00 1.15E-01
Potential
Photochemical
Potential
Abiotic Depletion
Fossil Resources

TABLE 28: 8” PS 46 ASTM F794 (PROFILE WALL) USE OF RESOURCES

Disposal
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Energy Carrier
Renewable Primary
Energy Carrier
Content Used as a
Material
Renewable Primary
RPRM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Content Used as a
Material
Use of Secondary
SM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials
Renewable Secondary
RSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Fuels
NRSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Secondary Fuels
Fresh Water
FW m3 7.18E+00 2.13E-02 1.18E+00 0.00E+00 1.15E+02 0.00E+00 1.92E-01
Consumption
TABLE 29: 8” PS 46 ASTM F794 (PROFILE WALL) OUTPUT FLOWS

Disposal
Parameter Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
HWD kg 0.00E+00 0.00E+00 2.94E-02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
Disposed-of Non-
NHWD kg 0.00E+00 0.00E+00 9.11E+00 0.00E+00 9.12E+01 0.00E+00 1.23E+03
Hazardous Waste
RWD kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
MET kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Recovery
Exported Electrical
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Exported Thermal
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00

SANITARY SEWER PIPE: 8” DR 35 ASTM D3034 (SOLID WALL) PVC PIPE
TABLE 30: 8” DR 35 ASTM D3034 (SOLID WALL) LIFE CYCLE IMPACT ASSESSMENT
Use Stage Disposal
Unit (per Stage
TRACI v2.1
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
EP kg N eq 2.85E+00 1.23E-01 1.63E+00 2.81E-02 3.08E+00 0.00E+00 2.40E-03
Potential
Photochemical
POCP Ozone Creation kg O3 eq 1.54E+02 5.68E+01 2.00E+01 1.38E+01 8.40E+02 0.00E+00 5.22E-01
Potential

Product Stage
Unit (per Stage
CML 2 Baseline 2001
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
EP kg PO4 eq 1.90E+00 3.07E-01 7.79E-01 7.38E-02 5.09E+00 0.00E+00 3.58E-03
Potential
Photochemical
Potential
Abiotic Depletion
Fossil Resources

TABLE 31: 8” DR 35 ASTM D3034 (SOLID WALL) USE OF RESOURCES

Disposal
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Energy Carrier
Renewable Primary
RPRE Resources Used as an MJ 3.70E+03 4.50E+00 0.00E+00 0.00E+00 4.27E+02 0.00E+00 2.27E-01
Energy Carrier
Content Used as a
Material
Renewable Primary
RPRM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Content Used as a
Material
Use of Secondary
SM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials
Renewable Secondary
RSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Fuels
NRSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Secondary Fuels
Fresh Water
FW m3 1.61E+01 1.06E-01 1.24E+00 0.00E+00 1.15E+02 0.00E+00 3.00E-02
Consumption
TABLE 32: 8” DR 35 ASTM D3034 (SOLID WALL) OUTPUT FLOWS

Disposal
Parameter Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
HWD kg 0.00E+00 0.00E+00 4.59E-02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
Disposed-of Non-
NHWD kg 0.00E+00 0.00E+00 1.42E+01 0.00E+00 1.15E+02 0.00E+00 1.92E+03
Hazardous Waste
RWD kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
MET kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Recovery
Exported Electrical
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Exported Thermal
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00

SANITARY SEWER PIPE: 24” PS 46 ASTM F679 (SOLID WALL) PVC PIPE
TABLE 33: 24” PS 46 ASTM F679 (SOLID WALL) LIFE CYCLE IMPACT ASSESSMENT
Use Stage Disposal
Unit (per Stage
TRACI v2.1
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
EP kg N eq 1.15E+01 5.13E-01 1.12E+01 1.33E-01 6.90E+00 0.00E+00 1.40E-01
Potential
Photochemical
Potential

Product Stage
Unit (per Stage
CML 2 Baseline 2001
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Global Warming
Potential
Depletion
Potential of the
Stratospheric
Ozone Layer
Acidification
Potential
Eutrophication
Potential
Photochemical
Potential
Abiotic Depletion
Fossil Resources

TABLE 34: 24” PS 46 ASTM F679 (SOLID WALL) USE OF RESOURCES

Disposal
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
Energy Carrier
Renewable Primary
Energy Carrier
Content Used as a
Material
Renewable Primary
RPRM kg 1.12E+04 0.00E+00 1.82E+03 0.00E+00 2.11E+02 0.00E+00 7.03E+00
Content Used as a
Material
Use of Secondary
SM kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Materials
Renewable Secondary
RSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Fuels
NRSF MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Secondary Fuels
Fresh Water
FW m3 1.21E+02 0.00E+00 1.49E+01 0.00E+00 1.53E+02 0.00E+00 2.56E+00
Consumption
TABLE 35: 24” PS 46 ASTM F679 (SOLID WALL) OUTPUT FLOWS

Disposal
Parameter Stage
1,000 ft)
A1 A2 A3 A4 A5 B1-B7 C1-C4
HWD kg 2.08E-02 0.00E+00 1.20E-02 0.00E+00 5.75E-02 0.00E+00 3.64E-03
Waste
Disposed-of Non-
NHWD kg 4.53E+02 0.00E+00 2.57E+02 0.00E+00 3.11E+02 0.00E+00 1.63E+04
Hazardous Waste
RWD kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Waste
MET kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Recovery
Exported Electrical
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Exported Thermal
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
BBPr Bio-Based Products kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
BBPk Bio-Based Packaging kg -6.37E+00 0.00E+00 0.00E+00 0.00E+00 6.37E+00 0.00E+00 0.00E+00

CONTACT INFORMATION
Practitioner:
This EPD and corresponding LCA were prepared by Sustainable Solutions
Corporation of Royersford, Pennsylvania. To contact, please reach out at
www.sustainablesolutionscorporation.com/contact-us.
Association Description:
PVCPA is the owner of this declaration. Their mission is to promote use of longer-life, lower-maintenance, corrosion-proof
PVC piping in water and wastewater systems – for real sustainability, strength and long-term asset management. For more
information, please reach out at [email protected].

REFERENCES
Note: clickable links are blue and underlined.
The following references were used in the publication of this EPD:

1. AASHTO M304 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled
Inside Diameter. 2011.
2. ASTM D1784 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and
Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds. 2020.
3. ASTM D2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design
Basis for Thermoplastic Pipe Products. 2022.
4. ASTM D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings. 2021.
5. ASTM F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe. 2021.
6. ASTM F679 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings. 2021.
7. ASTM F794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled
Inside Diameter. 2021.
8. AWWA C900 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 in. through 60 in. (100 mm Through 1,500 mm).
2022.
9. AWWA C909 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 in. (100 mm) and Larger. 2022.
10. Burn, S. et. al., “Long-term Performance Prediction for PVC Pipes,” AWWARF Report 91092F, May 2006.
11. Folkman, Steven. PVC Pipe Longevity Report: Affordability & the 100+ Year Benchmark Standard. Utah State University Buried
Structures Laboratory. May 2014.
12. Forum on Forestry Forum. https://www.forestryforum.com/board/index.php?topic=14063.0. Accessed March 2013.
13. Forum on Heavy Equipment. https://www.heavyequipmentforums.com/showthread.php?5804-Fuel-Consumption. Accessed
March 2013.
14. Handbook of PVC Pipe: Design and Construction. Fifth Edition. Uni-Bell. (2012). p. 9.7.
15. ISO 14025:2006-10, Environmental Labelling and Declarations - Type III — Environmental Declarations — Principles and
Procedures (ISO 14025:2006); English version.
16. ISO 14040:2006-10, Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006); English
version EN ISO 14040:2006.
17. ISO 14044:2006-10, Environmental management - Life cycle assessment - requirements and guidelines (ISO 14044:2006); English
version EN ISO 14044:2006.
18. ISO 21930:2017 Sustainability in Building Construction — Environmental Declaration of Building Products
19. NSF Standard 61 Drinking Water System Components. 2021.
20. SI Metric. Density of Dry Material Table. https://www.simetric.co.uk/si_materials.htm. Accessed September 25, 2013.
21. SimaPro v9.2 Multi user. PRé Consultants. 2021.
22. UL 1285 Pipe and Couplings, Polyvinyl Chloride (PVC), and Oriented Polyvinyl Chloride (PVCO) for Underground Fire Service.
2022.
23. US LCI Database for Life Cycle Engineering, National Renewable Energy Laboratory, Lakewood, CO. 2008.

APPENDIX: FITTINGS LIFE CYCLE ASSESSMENT RESULTS

Per the Product Category Rule, fittings must also be included in the EPD. As these piping systems are belled, fittings
are not required to join the pipes together; however, 258 fittings were assumed as instructed by the PCR standard
for the pressure pipe systems and 234 fittings were assumed for sanitary sewer. The life cycle impact assessment
results are reported in separately in this Appendix as systems are variable in the number and type of fittings required.
PRESSURE PIPE: 8” AWWA C900 FITTINGS

Pressure pipe is designed with belled joints at the end of each pipe with a gasket provided so that individual pipe units
can be installed easily. However, the Product Category Rule states that 258 fittings must be included in each system. Since
fittings vary a weight of 12 pounds per piece were included. Please note that the number of fittings per system vary and
that each pipe can be joined together without an additional fitting. Similar distances traveled for modules A2, A4 and C2
were assumed. No installation scrap was assumed since fittings are designed by piece. Module B’s energy use are assumed
to be included in each individual pipe system described above and therefore not included in the fittings tables.
TABLE 36: 8” AWWA C900 FITTINGS LIFE CYCLE IMPACT ASSESSMENT

Product Use Stage Disposal
Unit Construction Stage
Stage Stage
TRACI v2.1 (per 258
fittings) A1-A3 A4 A5 B1-B7 C1-C4
GWP Global Warming Potential kg CO2 eq 3.21E+03 6.00E+01 0.00E+00 0.00E+00 1.39E+01
Depletion Potential of the Stratospheric
ODP kg CFC-11 eq 4.88E-04 2.29E-09 0.00E+00 0.00E+00 3.20E-06
Ozone Layer
AP Acidification Potential kg SO2 eq 2.52E+01 3.58E-01 0.00E+00 0.00E+00 1.51E-01
EP Eutrophication Potential kg N eq 2.48E+00 2.00E-02 0.00E+00 0.00E+00 1.76E-02
POCP Photochemical Ozone Creation Potential kg O3 eq 1.56E+02 9.81E+00 0.00E+00 0.00E+00 3.82E+00
Product Construction Stage Use Stage Disposal

Unit
Stage Stage
CML 2 Baseline 2001 (per 258
Ozone Layer
EP Eutrophication Potential kg PO4 eq 1.70E+00 5.24E-02 0.00E+00 0.00E+00 2.62E-02
POCP Photochemical Ozone Creation Potential kg C2H4 eq 1.50E+00 1.36E-02 0.00E+00 0.00E+00 -1.22E-02
Abiotic Depletion Potential for
ADPF MJ 8.99E+04 7.72E+02 0.00E+00 0.00E+00 3.01E+02
Fossil Resources

TABLE 37: 8” AWWA C900 FITTINGS USE OF RESOURCES

Stage Stage
Use of Resources (per 258
Non-renewable Primary Resources Used

NRPRE MJ 6.90E+04 0.00E+00 0.00E+00 0.00E+00 3.03E+02
as an Energy Carrier
Renewable Primary Resources Used as
RPRE MJ 6.91E+02 0.00E+00 0.00E+00 0.00E+00 1.66E+00
an Energy Carrier
Non-renewable Primary Resources With
NRPRM kg 2.40E+04 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Energy Content Used as a Material
Renewable Primary Resources With
RPRM kg 6.52E+02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
SM Use of Secondary Materials kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
RSF Renewable Secondary Fuels MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
NRSF Use of Non-Renewable Secondary Fuels MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
FW Fresh Water Consumption m3 1.06E+01 0.00E+00 0.00E+00 0.00E+00 2.20E-01
NRN Non-renewable Nuclear MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
TABLE 38: 8” AWWA C900 FITTINGS OUTPUT FLOWS

Stage Stage
Parameter (per 258
HWD Disposed-of Hazardous Waste kg 3.36E-02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
NHWD Disposed-of Non-hazardous Waste kg 1.04E+01 0.00E+00 1.06E+02 0.00E+00 1.41E+03

RWD Disposed-of Radioactive Waste kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
CRU Components for Reuse kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
MFR Materials for Recycling kg 7.35E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
MET Materials for Energy Recovery kg 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Exported Electrical Energy
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
(Waste to Energy)
Exported Thermal Energy
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
(Waste to Energy)
BBPr Bio-Based Products kg CO2 eq 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
BBPk Bio-Based Packaging kg CO2 eq -3.46E+01 0.00E+00 3.46E+01 0.00E+00 0.00E+00

PRESSURE PIPE: 24” AWWA C900 FITTINGS

Pressure pipe is designed with belled joints at the end of each pipe with a gasket provided so that individual pipe units
TABLE 39: 24” AWWA C900 FITTINGS LIFE CYCLE IMPACT ASSESSMENT
Stage Stage
TRACI v2.1 (per 258
Ozone Layer
AP Acidification Potential kg SO2 eq 2.73E+02 3.88E+00 0.00E+00 0.00E+00 1.51E-01

Unit
Stage Stage
Ozone Layer
ADPF MJ 9.74E+05 8.36E+03 0.00E+00 0.00E+00 3.01E+02
Fossil Resources

TABLE 40: 24” AWWA C900 FITTINGS USE OF RESOURCES

Stage Stage

NRPRE MJ 9.84E+05 0.00E+00 0.00E+00 0.00E+00 3.03E+02
RPRE MJ 1.39E+04 0.00E+00 0.00E+00 0.00E+00 1.66E+00
an Energy Carrier
NRPRM kg 2.40E+04 0.00E+00 0.00E+00 0.00E+00 0.00E+00
RPRM kg 6.52E+02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
TABLE 41: 24” AWWA C900 FITTINGS OUTPUT FLOWS

Stage Stage
Parameter (per 258

EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
(Waste to Energy)
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
(Waste to Energy)

SANITARY SEWER PIPE: 8” SOLID-WALL ASTM D3034 FITTINGS

Nonpressure pipe is designed with belled joints at the end of each pipe with a gasket provided so that individual pipe units
fittings vary a weight of 4.5 pounds per piece were included. Please note that the number of fittings per system vary and
TABLE 42: 8” SOLID-WALL ASTM D3034 FITTINGS LIFE CYCLE IMPACT ASSESSMENT
Stage Stage
TRACI v2.1 (per 234
Ozone Layer

Unit
Stage Stage
Ozone Layer
EP Eutrophication Potential kg PO4 eq 7.41E-01 1.84E-02 0.00E+00 0.00E+00 8.92E-03
POCP Photochemical Ozone Creation Potential kg C2H4 eq 4.90E-01 4.78E-03 0.00E+00 0.00E+00 -4.14E-03
ADPF MJ 2.73E+04 2.71E+02 0.00E+00 0.00E+00 1.02E+02
Fossil Resources

TABLE 43: 8” SOLID-WALL ASTM D3034 FITTINGS USE OF RESOURCES

Stage Stage

NRPRE MJ 2.03E+04 0.00E+00 0.00E+00 0.00E+00 1.03E+02
RPRE MJ 7.81E+02 0.00E+00 0.00E+00 0.00E+00 5.66E-01
an Energy Carrier
NRPRM kg 8.17E+03 0.00E+00 0.00E+00 0.00E+00 0.00E+00
RPRM kg 2.22E+02 0.00E+00 0.00E+00 0.00E+00 0.00E+00
TABLE 44: 8” SOLID-WALL ASTM D3034 FITTINGS OUTPUT FLOWS

Stage Stage
Parameter (per 234
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
(Waste to Energy)
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
(Waste to Energy)

SANITARY SEWER PIPE: 24” SOLID-WALL ASTM F679 FITTINGS

Nonpressure pipe is designed with belled joints at the end of each pipe with a gasket provided so that individual pipe units
TABLE 45: 24” SOLID-WALL ASTM F679 FITTINGS LIFE CYCLE IMPACT ASSESSMENT
Stage Stage
TRACI v2.1 (per 234
Ozone Layer

Unit
Stage Stage
Ozone Layer
ADPF MJ 3.70E+05 3.67E+03 0.00E+00 0.00E+00 1.39E+03
Fossil Resources

TABLE 46: 24” SOLID-WALL ASTM F679 FITTINGS USE OF RESOURCES

Stage Stage

NRPRE MJ 2.75E+05 0.00E+00 0.00E+00 0.00E+00 1.40E+03
RPRE MJ 1.06E+04 0.00E+00 0.00E+00 0.00E+00 7.68E+00
an Energy Carrier
NRPRM kg 1.11E+05 0.00E+00 0.00E+00 0.00E+00 0.00E+00
RPRM kg 3.00E+03 0.00E+00 0.00E+00 0.00E+00 0.00E+00
FW Fresh Water Consumption m3 5.87E+01 0.00E+00 0.00E+00 0.00E+00 1.01E+00
TABLE 47: 24” SOLID-WALL ASTM F679 FITTINGS OUTPUT FLOWS

Stage Stage
Parameter (per 234
EEE MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
(Waste to Energy)
EET MJ 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
(Waste to Energy)

Environmental Product Declaration
Uni-Bell PVC Pipe Association – PVC Pipe Products

Sanitary Pipeline Product Recovery

Uploaded by

Copyright:

Available Formats

Sanitary Pipeline Product Recovery

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sanitary Pipeline Product Recovery

Uploaded by

Copyright:

Available Formats

Uni-Bell PVC Pipe Association

PVC Nonpressure Pipe:

EPD Program Operator 2 Date of Issue: March 21, 2023

ENVIRONMENTAL PRODUCT DECLARATION (EPD) VERIFICATION

Uni-Bell PVC Pipe Association

Product: Date of Issue: Declaration Number:

This EPD was independently verified by NSF International

This life cycle assessment (LCA) was independently verified in

EPD Program Operator 3 Date of Issue: March 21, 2023

SUMMARY OF EMBODIED CARBON AND ENERGY

TABLE 1: SUMMARY OF EMBODIED CARBON AND ENERGY

kg CO2 eq / 1,000 ft MJ / 1,000 ft

8” DR 18 AWWA C900 9.10E+03 2.64E+05

8” DR 25 AWWA C900 6.70E+03 1.95E+05

24” DR 25 AWWA C900 5.89E+04 1.69E+06

8” PC 235 AWWA C909 6.38E+03 1.79E+05

24” PS 46 (Profile) ASTM F794 / AASHTO M304 3.19E+04 9.34E+05

8” PS 46 (Profile) ASTM F794 2.67E+03 7.71E+04

8” DR 35 ASTM D3034 4.31E+03 1.18E+05

24” PS 46 ASTM F679 3.06E+04 8.88E+05

EPD Program Operator 4 Date of Issue: March 21, 2023

ADDITIONAL ENVIRONMENTAL INFORMATION

Environmental and Health During Installation:

Environmental and Health During Use:

EPD Program Operator 5 Date of Issue: March 21, 2023

TABLE 2: PRODUCTS INCLUDED IN STUDY

EPD Program Operator 6 Date of Issue: March 21, 2023

TABLE 3: PARTICIPATING PVC PIPE FIGURE 2: PVC PIPE LCA STUDY

Diamond Plastics Corporation

Jet Stream by PipeLife

National Pipe & Plastics Corporation

Sanderson Pipe Corporation

Westlake Pipe & Fittings

EPD Program Operator 7 Date of Issue: March 21, 2023

SYSTEM BOUNDARY TABLE 4: SYSTEM BOUNDARY

MATERIAL CONTENTS Use B1 X

Benefits of Reuse D MND

*MND = module not disclosed

EPD Program Operator 8 Date of Issue: March 21, 2023

TABLE 5: AVERAGE PVC PIPE PRODUCT FORMULATIONS (A1)

PVC 100 100 100 100 100 100 100 100

Stabilizer 0.59 0.56 0.64 0.50 0.61 0.50 0.54 0.57

Pigments/Colorants 0.15 0.15 0.08 0.03 0.64 0.59 0.32 1.61

Wax 0.99 0.47 1.32 0.94 1.36 1.46 1.00 1.01

Combined Wax 0.24 0.33 0.09 — — — 0.18 0.07

Impact Modifier — — — — 0.28 — 0.03 —

Processing Aid — — 0.12 — 0.32 — — —

Recycled PVC — — — — — — 3.43 —

Total 109 108 109 108 118 113 129 128

EPD Program Operator 9 Date of Issue: March 21, 2023

FIGURE 3: PVC PIPE MANUFACTURING PROCESS

EPD Program Operator 10 Date of Issue: March 21, 2023

TABLE 6: TRANSPORT TO THE CONSTRUCTION SITE (A4)

Vehicle Type Truck

EPD Program Operator 11 Date of Issue: March 21, 2023

FIGURE 4: TRENCH CROSS-SECTION DIAGRAM

EPD Program Operator 12 Date of Issue: March 21, 2023

TABLE 7: CONSTRUCTION / INSTALLATION ASSUMPTIONS (A5)

EPD Program Operator 13 Date of Issue: March 21, 2023

REFERENCE SERVICE LIFE

Water Loss Liters — — —