6 - HiAce - Acidic Wear

Data sheet 2070us Hardox® HiAce 2023-04-26
Hardox® HiAce
General Product Description
Hardox® HiAce is an ace at fighting both abrasive wear and corrosion.
It features the same excellent properties as Hardox® 450, with a nominal hardness of 450 HBW.
Hardox® HiAce is a true wear fighter, especially in acidic corrosive environments that threaten to eat away at your equipment. This corrosion-resistant steel
plate helps to meet the challenges of corrosive wear environments found in municipal and industrial waste management: garbage trucks, containers and
wear surfaces exposed to acid in waste and recycling facilities, as well as equipment operating in landfills; recycling, waste-to-energy plants and biomass
facilities, paper and pulp mills, mining and quarrying, agricultural applications and forestry as well as process industries.
Dimension Range
Hardox® HiAce is available as plate in thicknesses of 0.157" - 3.937". Hardox HiAce is available in widths up to 78.74" and lengths up to 575.98". More
detailed information on dimensions is provided in the dimension program.
Mechanical Properties
Product Thickness Hardness 1) Typical yield strength
(in) (HBW) (ksi), not guaranteed
Hardox® HiAce 0.157 - 3.937 425 - 475 181
1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.019 – 0.118" below surface. At least one test specimen per heat and 40 tonnes. The nominal thickness of supplied plates
will not deviate more than +/- 0.590" from the thickness of the test specimen used for hardness testing. For sheet the Brinell hardness test is according to EN ISO 6506-1 on each heat treatment
individual/coil. Hardness is measured on a milled surface 0.012 - 0.079" below surface.
Hardox® wear plate is through-hardened. Minimum core hardness is 90 % of the guaranteed minimum surface hardness.
Impact Properties
Thickness Transverse test, guaranteed impact energy,
(in) Charpy V 0.393 x 0.393" test specimen 1)
0.157 - 3.937 20 ft-lbs / -4 °F 1)
1) Single value minimum 70% of specified average.
Chemical Composition (heat analysis)

C *) Si *) Mn*) P S Cr*) Ni*) Mo*) B*)
(max %) (max %) (max %) (max %) (max %) (max %) (max %) (max %) (max %)
0.26 0.70 1.60 0.025 0.010 5.10 1.50 0.60 0.005
The steel is grain refined. *) Intentional alloying elements.
Carbon Equivalent CET(CEV)

Thickness (in) 0.157 - 3.937
Max CET(CEV) 0.42 (1.08)
Typ CET(CEV) 0.39 (1.01)
Data sheet 2070us Hardox® HiAce 2023-04-26
Tolerances
More details are given in SSAB’s brochure Hardox® Guarantees or at www.ssab.com.
Thickness
Tolerances according to Hardox® Thickness Guarantees.
Hardox® Guarantees meets the requirements of EN 10029 Class A, but offers more narrow tolerances.
Length and Width
According to SSAB’s dimension program.
Tolerances according to SSAB´s mill edge standards or tolerances that conform to EN 10029.
Shape
Tolerances according to EN 10029.
Flatness
Tolerances according to Hardox® Flatness Guarantees Class D, which are more restrictive than EN 10029.
Surface Properties
According to EN 10163-2 Class A, Subclass 1.
Delivery Conditions
The delivery condition is Q or QT (Quenched or Quenched and Tempered). Hardox® HiAce is delivered with sheared or thermally cut edges.
Delivery requirements can be found in SSAB’s brochure Hardox® Guarantees or www.ssab.com.
Fabrication and Other Recommendations

Welding, bending and machining
Recommendations can be found in SSABs brochures at www.hardox.com or consult Tech Support.
Bendability according to Hardox® Bending Guarantees Class F.
Hardox® wear plate is not intended for further heat treatment. It has obtained its mechanical properties by quenching and when necessary by means of
subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 482ºF .
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer
coated plates, may produce dust with a high particle concentration.
Contact Information
www.ssab.com/contact
The English version of this document shall prevail in case of discrepancy. Minor changes and updates to the document may occur, please download
the latest version of this document at www.ssab.com
SSAB, Strenx, Hardox, Docol, GreenCoat, Toolox, Armox, Ramor, SSAB Domex, SSAB Laser, Raex, Duroxite are trademarks owned by the SSAB group
of companies.

6 - HiAce - Acidic Wear

Uploaded by

Copyright:

Available Formats

6 - HiAce - Acidic Wear

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

6 - HiAce - Acidic Wear

Uploaded by

Copyright:

Available Formats

Data sheet 2070us Hardox® HiAce 2023-04-26

Chemical Composition (heat analysis)

Carbon Equivalent CET(CEV)

Delivery requirements can be found in SSAB’s brochure Hardox® Guarantees or www.ssab.com.

Fabrication and Other Recommendations

Bendability according to Hardox® Bending Guarantees Class F.

You might also like