DK Ing Impetus 90-315
DK Ing Impetus 90-315
DK Ing Impetus 90-315
90-315 kW
IM PE TU S
SERIES
Dalgakıran Impetus Series two stage screw compressors provide compressed
air suitable for your needs with its superior technological equipment, modern
design and high energy savings. With the Impetus VSD Series, we can meet your
compressed air needs with energy savings up to 65%. The Impetus Series air
compressors are specially designed to meet all your needs from 90 to 315 kW.
5,1-62,3
m3/min
90-315
kW
7,5-8,5
10-13
bar
IMPETUS SERIES
Oil Injected, Two-Stage, Direct Coupled, Fixed/Variable Speed
Rotary Screw Compressors
Impetus, maximizes your energy saving with heat recovery option, minimizes your total cost of ownership down
with VSD technology.
IMPETUS
General
Features
• IE4 efficiency-class electric motors
• Two-stage screw block
• Water cooling
• Variable and fixed speed power
transmission options
• Heat recovery optional
• Operating with low noise level
In such conditions our compressors automatically adjusts the compressor’s operating speed to
match air pruduction to demand in real time, saving significant amounts of energy.
A traditional fixed speed air compressor can only operate at full capacity. Fixed speed
compressors consume a lot of energy when less air is required and some of the energy is
wasted.
Why
Dalgakıran VSD?
• Whereas VSD compressor works only according to the amount of need, it reduces the energy cost.
• There is no need to unload, which saved both time and energy.
• Air system pressure is more consistent and also lower, minimizing energy consumption and air leaks.
• Motor and inverter are specially design to provide maximum efficiency.
• The motors have successfully passed tests performed in the harsest conditions such as high temperature and
high pressure.
• Variable speed compressors vibrate less than the other models used in the market.
Screw
• Two-stage screw ensures energy efficiency by up to 10%
• Higher flow rate by up to 10%
• Direct couplet
• Reduced internal losses
• Thanks to low compression rate low axial and compression forces
• Thanks to low rotor speeds a long service life
• With two-stage compression near isothermal compression
• Reduced axial and compression forces resulting in longer screw and bearing service life
IMPETUS
Electric Motor
• IE4 efficiency-class electric
motors
• Motors have B-class
temperature increase
• Continuous operating feature
Intake Chamber
• Intake in cold air directly from the environment contributes to energy efficiency by up to 2%
• With minimized intake pressure losses, high energy efficiency
• With improved acoustic designs result in low noise levels
Cooling
System
• High cooling efficiency in compact air and oil heat exchangers
• Suitable design for operating up to 45oC
• Low noise level with low speed radial fans
• Energy efficiency with optimum oil temperature thanks to VSD-controlled radial fan
• IE3 fan motors
IMPETUS
•
•
•
Air Filter
Protects the screw unit by separating particles
down to 3 microns
Intake pressure loss: <2 mbar results in high
efficiency throughout the maintenance period
Easy maintenance
Long service life
Oil Filter
• Eco-friendly and recyclable oil filter
• Oil filter contains no metal alloys
• Aluminium housing
• Easy maintenance
Water Oil
Separator Separator
• Compact, integrated, and unique design • High separation efficiency thanks to larger
• Reliable initial separation (>% 99) surface area
• High separation efficiency at high • The Sep-n-Sep feature results in at least
humidity and temperature 30% lower pressure drop
• Zero loss drain • The oil separator tank and sensitive dual
• High energy efficiency with minimal surface air oil separator keep the amount
pressure loss of oil at the compressed air outlet below 3
mg/m3
Maintenance
and Service
• The compressor’s key
components are specially
designed to make servicing easy.
• Oil filter and air filters can be
replaced easily
• Longer maintenance period due
to less force on the bearings
• Low-speed rotors produce less
vibration and noise
• It provides easy installation
thanks to 20% smaller
footprints compared to
two-stage competitors.
Controller
• Without the need for an external main controller, ability to work synchronized for up to 5 compressors
• Weekly scheduler for starting / stopping the machine at 3 different time intervals can be individually set
for each day of the week
• Dual PID feature on inverter-equipped models can run simultaneous PID for temperature and pressure
• Pressure PID on inverter-equipped models ensures energy-efficient operation by maintaining the
pressure at the required level
• Temperature PID on inverter-equipped models controls the fan speed to maintain the screw block’s
most efficient operating temperature
• On inverter-equipped models, all inverter and compressor control data are managed from a single point
• Internal ModBus communication
• User-friendly on-screen interface
• Alarm log records the last 20 alarms
• Periodic maintenance warnings and log records
Certification
• Motor and driver meet the
requirements of IEC2 (EN50598) and
CE Certificates
Pressure Capacity* Motor Connection Dimensions (mm) Weight Noise
Model
bar psi m3/min cfm kW/HP Size Length Width Height kg dB (A)
- Unit performances measured in reference conditions which are 1 bar absolute air Pressure, %0 relative humidity, 20°C inlet air temperature, 71°C thermostatic valve set
temperature and use of Smartoil.
- Dalgakıran reserves its rights to make changes in its products and specifications without prior notice.
* Refers to free air delivery measured according to ISO 1217:2009, Annex E standard.
Capacity* Motor
Pressure Dimensions (mm) Weight Noise
Minimum Maximum Power Connection
Model
Size
bar psi m3/min cfm m3/min cfm kW/hp Length Width Height kg dB (A)
- Unit performances measured in reference conditions which are 1 bar absolute air Pressure, %0 relative humidity, 20°C inlet air temperature, 71°C thermostatic valve set
temperature and use of Smartoil.
- Dalgakıran reserves its rights to make changes in its products and specifications without prior notice.
* Refers to free air delivery measured according to ISO 1217:2009, Annex E standard.
0223-0102-0901-001
Headquarter: Eyup Sultan Mah. Muminler Cad. No: 70 34885 Sancaktepe / Istanbul /
TurkeyFactory: Makine Ihtisas OSB, Demirciler Mah. 1. Cad. No:1/2, Merkez, Dilovası / Kocaeli / Turkey
Tel: +90 216 311 71 81 E-mail: [email protected]