Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    محطة توليد كهرباء العين السخنة

    Uploaded by

    farid.chira2
    The document is a transformer oil analysis report from ASCOM Carbonate and Chemicals Manufacturing. It analyzes a sample from a 630 kV, 5990 V transformer. The analysis found the moisture content, total acid number, interfacial tension, and breakdown voltage were outside acceptable limits. The lab manager and general manager signed off on the report noting these parameters were out of specification. It recommends the customer make any repair decisions based on the failed results.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    محطة توليد كهرباء العين السخنة

    Uploaded by

    farid.chira2
    9 views1 page
    The document is a transformer oil analysis report from ASCOM Carbonate and Chemicals Manufacturing. It analyzes a sample from a 630 kV, 5990 V transformer. The analysis found the moisture content, total acid number, interfacial tension, and breakdown voltage were outside acceptable limits. The lab manager and general manager signed off on the report noting these parameters were out of specification. It recommends the customer make any repair decisions based on the failed results.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a transformer oil analysis report from ASCOM Carbonate and Chemicals Manufacturing. It analyzes a sample from a 630 kV, 5990 V transformer. The analysis found the moisture content, total acid number, interfacial tension, and breakdown voltage were outside acceptable limits. The lab manager and general manager signed off on the report noting these parameters were out of specification. It recommends the customer make any repair decisions based on the failed results.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views1 page

    محطة توليد كهرباء العين السخنة

    Uploaded by

    farid.chira2
    The document is a transformer oil analysis report from ASCOM Carbonate and Chemicals Manufacturing. It analyzes a sample from a 630 kV, 5990 V transformer. The analysis found the moisture content, total acid number, interfacial tension, and breakdown voltage were outside acceptable limits. The lab manager and general manager signed off on the report noting these parameters were out of specification. It recommends the customer make any repair decisions based on the failed results.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ‫وزارة الكهرباء و الطاقة المتجددة‬

    ‫الشركة القابضة لكهرباء مصر‬


    ‫شركة شرق الدلتا النتاج الكهرباء‬
    ‫م‬.‫م‬.‫ش‬
    ‫االدارة العامة للكيمياء والمعامل‬ ‫محطة توليد كهرباء العين السخنة‬

    Sample Analysis Report


    Source: ASCOM Carbonate and Chemicals Manufacturing Test: Transformer Oil Analysis.
    Sampling Date: 05/09/2023 Receiving Date: 06/09/2023
    Sample Code:S-MMM-O-TR-230906-03 Report Code:R-MMM-O-TR-230909-03

    ‫ فولت‬5990 - ‫ف‬.‫ ك‬630 ‫ قدرة‬: ‫بيــــــان حــالــة زيـــت مــحــول‬

    Sample Source ASCOM Carbonate and Chemicals Manufacturing

    Trans. Code Transformer 630 k.v - 5990 V

    Chemical and Electrical Analysis ‫التحليل الكيميائى والكهربى‬

    Sample Limits Analysis date


    Reference
    Experiment ≤ 72.5 K.V > 72.5 ≤ 170 K.V > 170 K.V 09/12/2023

    Specific Gravity @ 15.5°C ASTM D4052 ≤ 0.91 0.8854

    Kinematic Viscosity@40°C cSt ASTM D445 ≤ 12 9.5921

    Flash Point (open Cup) °C ASTM D92 Max. decrease 10 % 158

    Total Acidity (mg KOH/g) ASTM D664 < 0.3 < 0.2 < 0.15 0.351

    Visual Examination ASTM D1524 Clear & Bright Clear Not Turbid*

    Moisture content ppm ASTM D1533 < 30 39

    Inter Facial Tension mN/m ASTM D971 > 22 15

    Break Down Voltage K.V IEC 60156 > 30 > 40 > 50 25.9

    * the sample has 3 astm color according to astm D1500.


    Comment: Moisture content, TAN, IFT & BDV are out of limits.
    Notice:
    This analysis is indicates of conditions based upon sample information received and the quality of sample supplied by the customer.
    Recommendations are provided as a guide only. Any decisions relating to repair of components is entirely at the discretion of the customer.

    Lab. Manager General Manager


    Mohamed R.Fadaly Mohamed El-Gaweesh

    You might also like