Scribd Logo
Upload

Welcome to Scribd!

  • 80 views

    Arv Manhole

    Uploaded by

    Brian Bonner
    This document provides details for a standard manhole design for a force main, including a 5-foot inside diameter precast concrete manhole barrel with a minimum 5-foot diameter cast iron ring and cover. It specifies a 2-inch ball valve and air release valve tapped into the force main with ductile iron piping on both sides. Notes indicate that all threaded piping should be brass with bronze fittings and valves, and that the manhole interior should receive two coats of a flexible coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Arv Manhole

    Uploaded by

    Brian Bonner
    80 views1 page
    This document provides details for a standard manhole design for a force main, including a 5-foot inside diameter precast concrete manhole barrel with a minimum 5-foot diameter cast iron ring and cover. It specifies a 2-inch ball valve and air release valve tapped into the force main with ductile iron piping on both sides. Notes indicate that all threaded piping should be brass with bronze fittings and valves, and that the manhole interior should receive two coats of a flexible coating.

    Original Title

    arv manhole

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details for a standard manhole design for a force main, including a 5-foot inside diameter precast concrete manhole barrel with a minimum 5-foot diameter cast iron ring and cover. It specifies a 2-inch ball valve and air release valve tapped into the force main with ductile iron piping on both sides. Notes indicate that all threaded piping should be brass with bronze fittings and valves, and that the manhole interior should receive two coats of a flexible coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    80 views1 page

    Arv Manhole

    Uploaded by

    Brian Bonner
    This document provides details for a standard manhole design for a force main, including a 5-foot inside diameter precast concrete manhole barrel with a minimum 5-foot diameter cast iron ring and cover. It specifies a 2-inch ball valve and air release valve tapped into the force main with ductile iron piping on both sides. Notes indicate that all threaded piping should be brass with bronze fittings and valves, and that the manhole interior should receive two coats of a flexible coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    STANDARD CAST IRON EXISTING GRADE

    RING & COVER


    PRECAST LID

    2' OPENING
    5'-0" I.D. PRECAST
    5"
    MANHOLE
    A.R.I. TYPE D-025
    COMBINATION
    5'-0" MIN
    MANHOLE AIR VALVE
    COVER REQ'D
    STEPS AT
    16" OC TAPPED TEE

    2" BALL
    VALVE
    DUCTILE IRON
    PIPE-1 JOINT
    EACH SIDE OF TEE

    FORCE MAIN
    4" MIN

    12" Ø OPENING
    END VIEW FRONT VIEW
    12" #67 OR #57 STONE
    NOTES:

    1. ALL THREADED PIPING SHALL BE BRASS W/ BRONZE FITTINGS AND VALVES.

    2. MANHOLE INTERIOR SHALL RECEIVE 2 COATS SHERWIN WILLIAMS SHER-FLEX OR EQUIVALENT WITH A TOTAL DRY FILM
    THICKNESS OF 80-125 MILS.

    STD. NO.

    SHEET 1 OF 1

    You might also like