0% found this document useful (0 votes)
62 views2 pages

Abb FTTP Install Guide

Uploaded by

cisige5328
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
62 views2 pages

Abb FTTP Install Guide

Uploaded by

cisige5328
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Aussie Broadband nbn®

FTTP self installation guide

NBNCo Network Termination Device


Voice (UNI-V) Ports
(UNI-D) Ports Power
(Not supported)

We will let you know


which UNI-D port
to connect to in
step 2 of our welcome
emails.

Aussie Broadband Supplied Modem

TEL DSL USB ETHERNET WAN


1 2 3 4

Home Phone Computer Laptop

For more information or


technical support call 1300 880 905

aussiebroadband.com.au
Getting to know your nbn®

Your nbn® connection box Understanding the lights on your nbn® connection box
The nbn™ have installed a connection box inside of your home, this unit Indicator Status Description Action
has a number of ports underneath (only one of these are active with
If an extension cord, power board
Aussie Broadband) which you can use to connect your devices to the nbn®. or AC UPS is used with the NTD,
disconnect these devices, plug the
Power Off No power
NBNCo Power Supply directly into
the AC outlet and make sure that
the AC supply is turned on
Operating from battery
Solid red
– if main power is off

Solid green Operating on AC power

Flashing green NTD is starting up

Optical Off NTD is disabled

Check optical patch lead


Solid red is seated fully in Optical Port
and not excessively kinked

Solid green Optical link is connected

Flashing green Activity

NTD is operating
Alarm Off
without failure

Solid red NTD hardware failure

No alarm, with local


Solid green
Ethernet access enabled
UNI D1 to No service provisioned
Off
UNI D4 or no link detected

Solid yellow 1G link detected


UNI-V ports UNI-D ports Power
Your VoIP service can be Your service will Connects to a power Flashing yellow 1G data activity
connected to one of these require a modem/ point or the nbn® PSU
ports. Aussie Broadband router, which you will (if you have one).
do not connect through need to connect to Solid green 10/100 link detected
the NTD port for VoIP one of these ports.
services. Flashing green 10/100 data activity None

You might also like