The Mechanics of Arrow Flight 101

By Daniel Grundman – Flex-Fletch

Thunk! The arrow you just released from your bow has hit its target. Or has it? Due to a number of
factors, your arrow may or may not have landed where you expected it to. Some of these factors we
have control of, some of them we do not. In addition to our form and technique, bow weight, string
size, shaft weight, arrow length, vanes or feathers are all things we can at some point control. Wind,
air density, and obstacles are factors we cannot control. We certainly can’t ask a deer to just wait a
minute for the wind to drop.

Unlike a bullet which is the same for each shooter and can be used in many different guns, an arrow
has unique properties that are singular to each archer. The characteristics of which are determined
by bow weight, draw length and perhaps some personal preferences. The purpose of this article is to
explain what happens during an arrow’s flight from bow to target, especially the critical milliseconds
as the arrow leaves the bow.

Initially, the bow is just a means to an end. From the point the arrow leaves the bow it has nothing
more to do with the task at hand, which is, the arrow finding its target. The scant amount of time the
arrow is in contact with the bow i.e. from release to clearance is critical and will be analyzed by ar-
chers until the end of time. By removing the human factor and looking solely at the arrows flight we
can gain some understanding of this somewhat obscure aspect of archery.

It seems so simple. Put the arrow on the bow, aim and shoot. But why then is there so much talk
about equipment? What’s the best bow? Who make the best broadhead? Should I switch to a differ-
ent type of arrow rest? I’ll tell you why. Because its fun. We all have a drive to learn and the more we
learn the more we crave. It’s a vicious cycle.

Perhaps I should start by offering a little background of myself. I’ve been around archery for as long
as I can remember. When I was a boy I’d go shooting with my dad who was a member and co-found-
er of the 3M archery club. As I got older and Flex-Fletch Products was just beginning, I helped fill or-
ders in our home office by hand counting and packaging vanes. My dad was always traditional when
it came to archery and never used a sight or release aid. His one concession was the compound bow.
He preferred to shoot instinctively and since he was my dad and I looked up to him I decided that was
the style for me.
Archers Paradox Effect

By definition a paradox is a statement or situation which seems contradictory. An example of a para-

The term “Archer’s Paradox” was coined by Dr. Robert P. Elmer, a well-known archery author in the
1930s. He used high speed film to analyze the behavior of an arrow upon release.

In this case the paradox in “The Archers Paradox” lies in the fact that when using a traditional finger
release, an archer must compensate for this effect by not really aiming at the spot he/she wants to
hit. Due to the forces placed on the string from the fingers release the string is essentially flung left-
wards, (assuming a right handed shooter). Perhaps this is not a true paradox, but close enough.

For the purposes of this article all references to the shooter hereafter will assume a right handed
shooter, standard 3 finger release.

The forces on an arrow

So let’s follow an arrow as it travels its path from the bow to the target with stops along the way to
analyze what is happening during each particular instant. We will be taking the path of least lan-
guage. In other words this isn’t going to be a technical journal but more of a common sense approach
to the actions and reactions of an arrow in flight and some of the variables in between. Lets face it we
don’t need all of the formulas to understand that if you drop a rubber ball onto a flat hard surface it’s
going to bounce. While the forces on an arrow in flight are much more extreme than this, by breaking
it down we will be able to better understand the physical forces present during this event.

We prepare our two items the bow and the arrow, by putting the nock end of the arrow on the string at
the prepared nock point. Proper nocking points are made of tread mixed with a drop of glue or ready
made metallic nocking points which you just press with pliers on the string. Proper placement of the
nock on the string is critical to arrow flight. Some say the arrow should be level and some say the
nock should be slightly high. Usually a little trial and error is called for.

We begin to draw the bow string back until the bow is at full draw. Our arrow is secured to the string
via the nock. The energy stored in the bow is now quite significant and we want to be sure we hit
our target. Now… the fingers relax on the string, and of course, the arrow is released. Here’s where
things get very interesting. The moment the string is released incredible forces take over and place
the arrow under a great amount of strain. In a very small amount of time the arrow goes through quite
a lot. Being that the shooter is using a finger release; the archers’ paradox comes into play.

When an archer releases the string using a traditional finger grip the string will ultimately slide off the
fingers and move left creating a leftward thrust on the rear of the arrow, this creates a slight bend in
the arrow. The arrow then tries to compensate for this by moving back to the right and then again
back to the left in decreasing amounts until the arrow is flying true. The acceleration of the arrow
plays a part here. The rear of the arrow has now begun to accelerate and there is a curvature to the
shaft. The front of the arrow is resisting, helping to create the ‘wobble’ that is common among finger
shooters. The “wobble“ is less pronounced with a release aid and with high spine shafts.
There are ways to reduce or even eliminate the “Archers Paradox” One way to minimize this is to
add spin to the arrow by fletching your vanes or feathers with an offset or helical. Another way is to
use a release aid. In many cases the use of a release aid can have a dramatic effect on reducing the
wobble of the arrow, A.K.A. arrow oscillations. There is always some oscillating no matter what shaft
or bow is used. The best we can do is control as much of it as possible. You can view a slow motion
video that show the arrow’s oscillations here:

http://www.youtube.com/watch?v=aNI9BG87qcI&feature=player_embedded

Now that the arrow is on its way to the target and is oscillating what we would like most is to dampen
the oscillations as quickly as possible. We want our arrow to straighten up and fly right in the least
amount of time, thereby maintaining more of the kinetic energy. Depending on the arrows spine,
which refers to the stiffness of an arrow shaft this will happen naturally given enough distance, type of
fletching and other arrow characteristics.

Your choice of arrow guidance (vanes or feathers) can have a dramatic influence on the flight of your
arrow as well. There are different schools of thought regarding this. One school says feathers are
better because they are more forgiving. This is somewhat true due to their light weight and increased
drag. Feathers tend to have a stabilizing effect giving them a little more jump out of the bow but will
reduce velocity more quickly than vanes down range. One disadvantage to feathers is that they are
less durable than vanes. Depending on your choice of vane, you will find that vanes are, more du-
rable than feathers.

Front of Center

Front of Center refers to the balance point of the finished arrow.

When feathers are used the Front of Center or F.O.C. is usually moved up, due to the feather’s light
weight. The arrow we are tracking has a FOC of 13% which is a percentage that falls within com-
monly accepted guidelines of around 10 -15%. Too much FOC and we get an arrow point that is too
heavy and will cause excessive arrow oscillations. Increasing weight in the front of the arrow reduces
spine. Or, for all intents and purposes it makes the arrow weaker and thus will bend or wobble more.
Reducing front weight or adding rear weight increases spine. Basically the rear of the arrow is push-
ing the front and the front is resisting. Feathers tend to “grip” the air better and help to pull the arrow
into line. Feathers are still a popular choice among bow hunters and for good reason. They have
been used in archery for thousands of years and have stood the test of time. But as we all know,
things change and so came the introduction of plastic fletchings or vanes. The debate about vanes or
feathers will probably go on forever.
Note of interest: The small sections of a feather that can be separated and put back together are
called vanes. So even when you use feathers, you’re shooting vanes.

As our arrow leaves the bow, along its flight path we can observe what is often called the “Kick”. It
looks almost like the rear of the arrow has jumped out of the bow sideways. This can easily be ob-
served by standing directly behind the archer. After that initial jump the arrow tends to look like it is
flying straight. In actuality, the oscillations are still present but usually not visible. Our arrow in this
case has large fletchings on it and the oscillations are damped quickly. If we were using very small
vanes or feathers we would see the net effect to be poor stabilization. That isn’t to say that with a well
tuned bow and good form we wouldn’t be able to affect this. I don’t want to offend any archers who
have taken the time to really hone their shooting skills along with their bow tuning skills. What I’m
referring to here is the general effects of fletching size. With a little trial and error we can usually find
the right size fletching to suit our shooting style.

The Spinning Arrow

A procedure most archers are familiar with is the process of spinning the arrow by way of attaching
the fletchings in an offset or helical pattern.

An arrow may already have a predisposition to curve in flight due to shaft asymmetry, a slight curve
in the shaft or a poorly aligned broadhead or nock. Any one of these or a combination of one or more
can have an effect on arrow flight. All of these together can really mess things up exponentially. In
other words add all of these tiny issues together and you can have a big problem. Of course in a
perfect world all of our arrows would be perfectly straight and our broadheads would all be true. The
world isn’t perfect so we compensate for these imperfections by making our arrow spin around its
axis. In doing so, the tendency of the arrow to curve its flight path is rotated in all directions, usually
resulting in tighter groups. Generally, the faster the arrow is spun the more spot-on the arrow’s trajec-
tory will be.

There are 3 ways to fletch an arrow: Straight,

A straight fletch is self explanatory and since

Offset and helical are sometimes confused due to the fact that they are both a means to create spin
and look similar and, unless examined closely, the difference is barely noticeable.
An offset vane or feather is just that, offset. The base of
the vane is still straight but offset along the length
of the shaft.

Helical on the other hand actually curves the

The arrow starts at zero rotation but depending on the degree of offset or helical can accelerate its
spin quickly.

As the arrow continues on, the spin rate speeds up. There are now two velocities in play, the arrow
velocity and the fletching velocity. The fletchings velocity is its rotation at a right angle to the shaft.
The drag on the entire arrow is the sum of the arrows speed and the fletchings spin rate. The spin
velocity increases until at some point the speed of the arrow is not sufficient to continue the spin ac-
celeration and it will have reached peak rotation speed.

All of this is happening while the arrow is oscillating, complicating all the simple factors that we just
talked about. What this means is that there is additional drag on the whole arrow but mostly on the
rear of the arrow, where the fletching is, as it bends and wobbles through the air. Part of the drag on
the fletching is trying to straighten the arrow out instead of spinning it.

So much for perfect arrow flight.

There are downsides to spinning an arrow. For one thing the energy to spin the arrow has to come
from somewhere and that somewhere is arrow speed. The proper amount of spin always (in my
humble opinion) cancels out the negatives.

There is no such thing as a perfect arrow or flight. But if we make use of our knowledge and take the
time to try a few things, we can make it look perfect. The archery industry is always willing to oblige
with the latest and best new advances.

There is so much more to this than can be covered here and I may get in over my head, so I’ll leave it
at that.

Oh yes, I almost forgot.

Thunk! Home at last.