ESP8266 LED Matrix Bar Weather Station

This document describes an LED matrix weather station project. It includes functions for an OTA web server, LED matrix clock/weather display, sensors, RGB LEDs, alarms, timers and more. It uses a Wemos D1 mini, MAX7219 LED matrices, sensors and has options for components like buttons, relays and displays.

Uploaded by

Gilberto Carlos

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as TXT, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

68 views9 pages

ESP8266 LED Matrix Bar Weather Station

Uploaded by

Gilberto Carlos

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as TXT, PDF, TXT or read online on Scribd

You are on page 1/ 9

/* =========================================================================

* Author: Zalophus Dokdo (https://zddh.blogspot.com)

* Date: 31/08/2017 (https://zalophus.tistory.com/)
* License: GPL v2
* =========================================================================
* LED Matrix Bar Weather Station V1.0.4b (Publish: 2018/01/02)
* =========================================================================
* -> Change WebApp scroll control (2021/01/11)
* -> Added timer setting (2020/10/13)
* -> Added alarm message setting function:
* .................Set scroll message to alarm message (2020/09/13)
* -> Added alarm setting (2020/09/10)
* -> AM-PM Mode, 24-hour clock, 12-hour clock (2020/09/09)
* -> Google clock replaced with NTP clock (2020/09/07)
* -> Resolved a problem that initialized when receiving Google clock
* -> Added web page refresh time (2020/09/06)
* -> Added RGB LED (2020/09/05)
* -> Error: ets jan 8 2013,rst cause:2, boot mode:(3,6) (2020/09/05)
* -> Added MQTT - Adafruit IO MQTT + IFTTT + Google Assistant (2020/07/30)
* -> Update Count 7.5m to 60m (2020/07/22)
* -> Added CHAR_SHIFT_DELAY - Config (2020/07/22)
* -> Change DHT12 Library (2018/03/12)
* =========================================================================
* Parts List:
* - 6 x MAX7219 8x8 Matrix LED
* - 1 x WeMos D1 mini
* - 1 x Interface shield
* Additional Parts:
* - 1 x DS18B20 temperature sensor (Option)
* - 1 x DHT22 temperature and humidity sensor (Option)
* - 1 x DHT12 temperature and humidity sensor (Option)
* - N x WS2812B RGB LED (Option)
* - 1 x Alarm On/Off button switch
* - 1 x Lamp Push button switch
* - 1 x Scroll Push button switch
* - 1 x Power On/Off switch
* - 1 x Buzzer
* -------------------------------------------------------------------------
* Fuctions:
* - OTA
* - mDNS
* - WiFi Manager
* - Web Server (WebUI)
* - LED Matrix Clock
* - Open Weather Map Weather Forecast
* - Indoor and Outdoor temperature and Humidity sensor monitor
* - Scrolling message
* - Scroll Push Switch
* - Lamp Push Switch
* - Alarm time setting (WebUI)
* - Alarm On/Off and Switch
* - Google Assistant: Adafruit IO MQTT + IFTTT
* =========================================================================
*/

#include <FS.h> // this needs to be first, or it all crashes and burns...

#include <ESP8266WiFi.h>
#include "Config.h"
#include "WiFi_Setup.h"
// Shields: ================================================================
#ifdef USE_DS18B20
#include "DS18B20.h"
#endif
#ifdef USE_DHT
#include "DHT.h"
#endif
#ifdef USE_DHT12
#include "DHT12.h"
#endif
#ifdef USE_RGB_LED_NEOPIXEL
#include "WS2812B_NeoPixel.h"
#endif
#ifdef USE_RGB_LED_STRIP_DRIVER
#include "LEDStrip.h"
#endif
// =========================================================================
#ifdef USE_LEDMATRIX_CLOCKWEATHER
#include "LEDMatrix_ClockWeather.h"
#endif
#ifdef USE_WEB_SERVER
#include "Web_Server.h"
#endif
#ifdef USE_MQTT
#include "MQTT.h"
#endif

int ScrollingMessage = 0;
int weatherScrollInterval = WEATHER_SCROLL_INTERVAL;

int freq[] = {1047, 1175, 1319, 1397, 1568, 1760, 1976, 2093};
String note[] = {"C6", "D6", "E6", "F6", "G6", "A6", "B6", "C7"};

int alarm_action = 1;
String alarm_message = "";
String onTimeMessage = OnTIME_MESSAGE;
int timer_action_start = 1;
int timer_action_stop = 1;
String timerStartMessage = TIMER_START_MESSAGE;
String timerStopMessage = TIMER_STOP_MESSAGE;

void setup() { // #########################################################

// put your setup code here, to run once:
Serial.begin(SERIAL_SPEED);
Serial.println("LED Matrix Bar Weather Station");
Serial.println();
delay(10);
#ifdef USE_DHT
pinMode(DHTPIN, INPUT); // TXD --> DHT11, DHT22
#endif
#ifdef USE_DS18B20
pinMode(ONE_WIRE_BUS, INPUT); // DS18B20
#endif
pinMode(RED_PIN, OUTPUT); // Alarm ON/OFF SW (Red)
pinMode(GREEN_PIN, OUTPUT); // Lamp Push Button SW (Green)
pinMode(BLUE_PIN, OUTPUT); // Weather Scroll Push Button SW (Blue)
pinMode(WHITE_PIN, OUTPUT); // RXD --> Buzzer & LED
digitalWrite(RED_PIN, LOW);
digitalWrite(GREEN_PIN, LOW);
digitalWrite(BLUE_PIN, LOW);
digitalWrite(WHITE_PIN, LOW);
#ifndef USE_DHT
#ifndef USE_RGB_LED_STRIP_DRIVER
pinMode(DHTPIN, OUTPUT); // D4 (GPIO02)
digitalWrite(DHTPIN, HIGH); // Build-in blue LED disable
#endif
#endif
#ifdef USE_RGB_LED_DIRECT
pinMode(RGB_LED_RED_PIN, OUTPUT);
pinMode(RGB_LED_GREEN_PIN, OUTPUT);
pinMode(RGB_LED_BLUE_PIN, OUTPUT);
digitalWrite(RGB_LED_RED_PIN, LOW);
digitalWrite(RGB_LED_GREEN_PIN, LOW);
digitalWrite(RGB_LED_BLUE_PIN, LOW);
#endif
#if defined(DEV_BOARD_WeMos_D1_mini) || defined(DEV_BOARD_ESP01)
pinMode(USE_RELAY_PIN, OUTPUT); // Relay
digitalWrite(USE_RELAY_PIN, LOW);
#endif
#ifdef DEV_BOARD_Witty
pinMode(USE_LIGHT_PIN, OUTPUT); // Light
pinMode(USE_RELAY_PIN, OUTPUT); // Relay
digitalWrite(USE_LIGHT_PIN, LOW);
digitalWrite(USE_RELAY_PIN, LOW);
#endif
#ifdef DEV_BOARD_WiFi_RELAY_MODULE
pinMode(USE_INPUT_PIN, OUTPUT); // Input to Output
pinMode(USE_RELAY_PIN, OUTPUT); // Relay
digitalWrite(USE_INPUT_PIN, LOW);
digitalWrite(USE_RELAY_PIN, LOW);
#endif

WiFi_setup();

// Shields =================================================================
#ifdef USE_DS18B20
DS18B20_setup();
#endif
#ifdef USE_DHT
DHT_setup();
#endif
#ifdef USE_DHT12
DHT12_setup();
#endif
#ifdef USE_RGB_LED_NEOPIXEL
NeoPixel_setup();
#endif
#ifdef USE_RGB_LED_STRIP_DRIVER
led.setColor();
#endif
// =========================================================================
#ifdef USE_LEDMATRIX_CLOCKWEATHER
LEDMatrix_ClockWeather_setup();
#endif
#ifdef USE_WEB_SERVER
Webserver_setup();
#endif
#ifdef USE_MQTT
MQTT_setup();
#endif
}

void loop() { // ##########################################################

ESP.wdtFeed(); // feeds the dog // Error: ets jan 8 2013,rst cause:2, boot mode:
(3,6)
#ifdef USE_OTA
if (OTAmode == 1) {
OTA_action();
}
#endif
#ifdef USE_WEB_SERVER
Webserver_action();
#endif
#ifdef USE_LEDMATRIX_CLOCKWEATHER
LEDMatrix_action();
if(millis() - clkTime > weatherScrollInterval && !del && dots) { // clock for
15s, then scrolls for about 30s
#ifdef USE_LED_MATRIX
if (dateScroll == 1) {
LEDMatrix_Date_action();
}
#ifdef USE_DHT
if (indoorScroll == 1) {
LEDMatrix_DHT_action();
}
#endif
#ifdef USE_DHT12
if (outdoorScroll == 1) {
LEDMatrix_DHT12_action();
}
#endif
if (weatherScroll == 1) {
LEDMatrix_Weather_action();
}
#endif
updCnt--;
clkTime = millis();
}
#endif
if (Clock == 1) {
LEDMatrix_Clock_action();
}
// Alarm On/Off Switch
if (digitalRead(RED_PIN)) {
if (printMsg == "") {
alarm_message = ALARM_MESSAGE;
} else {
alarm_message = printMsg;
}
if (m == alarm_m_set && alarm_action == 1) {
// On-time Alarm
if (onTimeAlarm == 1 && m == alarm_m_set && alarm_state == 1) {
for (int i = 0; i < 8; i++) {
digitalWrite(WHITE_PIN, HIGH);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, HIGH); digitalWrite(RGB_LED_GREEN_PIN,
HIGH); digitalWrite(RGB_LED_BLUE_PIN, HIGH);
#endif
delay(500);
digitalWrite(WHITE_PIN, LOW);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, LOW); digitalWrite(RGB_LED_GREEN_PIN,
LOW); digitalWrite(RGB_LED_BLUE_PIN, LOW);
#endif
delay(500);
}
#ifdef USE_RGB_LED_STRIP_DRIVER
ledStripColorWipe();
#endif
#ifdef USE_LED_MATRIX
printStringWithShift(" ", stringShiftDelay);
printStringWithShift(onTimeMessage.c_str(), stringShiftDelay);
delay(1000);
printStringWithShift(" ", stringShiftDelay);
delay(waitScroll);
#endif
// 12-hour clock Alarm
} else if (am_pm == 12 && ampm == alarm_ampm_select && h == alarm_h_set && m
== alarm_m_set && alarm_state == 1) {
for (int i = 0; i < 8; i++) {
digitalWrite(WHITE_PIN, HIGH);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, HIGH); digitalWrite(RGB_LED_GREEN_PIN,
HIGH); digitalWrite(RGB_LED_BLUE_PIN, HIGH);
#endif
delay(500);
digitalWrite(WHITE_PIN, LOW);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, LOW); digitalWrite(RGB_LED_GREEN_PIN,
LOW); digitalWrite(RGB_LED_BLUE_PIN, LOW);
#endif
delay(500);
}
#ifdef USE_RGB_LED_STRIP_DRIVER
ledStripColorWipe();
#endif
#ifdef USE_LED_MATRIX
printStringWithShift(" ", stringShiftDelay);
printStringWithShift(alarm_message.c_str(), stringShiftDelay);
delay(1000);
printStringWithShift(" ", stringShiftDelay);
delay(waitScroll);
#endif
// 24-hour clock Alarm
} else if (am_pm == 24 && h == alarm_h_set && m == alarm_m_set && alarm_state
== 1) {
for (int i = 0; i < 8; i++) {
digitalWrite(WHITE_PIN, HIGH);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, HIGH); digitalWrite(RGB_LED_GREEN_PIN,
HIGH); digitalWrite(RGB_LED_BLUE_PIN, HIGH);
#endif
delay(200);
digitalWrite(WHITE_PIN, LOW);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, LOW); digitalWrite(RGB_LED_GREEN_PIN,
LOW); digitalWrite(RGB_LED_BLUE_PIN, LOW);
#endif
delay(200);
}
#ifdef USE_RGB_LED_STRIP_DRIVER
ledStripColorWipe();
#endif
#ifdef USE_LED_MATRIX
printStringWithShift(" ", stringShiftDelay);
printStringWithShift(alarm_message.c_str(), stringShiftDelay);
delay(1000);
printStringWithShift(" ", stringShiftDelay);
delay(waitScroll);
#endif
}
alarm_action = 0;
} else if (m == alarm_m_set + 1) {
alarm_action = 1;
}
}
// Lamp Push Button Switch
if (digitalRead(GREEN_PIN)) {
#ifdef USE_RELAY
digitalWrite(USE_RELAY_PIN, HIGH);
#endif
}
if (!digitalRead(GREEN_PIN)) {
#ifdef USE_RELAY
digitalWrite(USE_RELAY_PIN, LOW);
#endif
}
#ifdef USE_LED_MATRIX
// Weather Scroll Push Button Switch
if (digitalRead(BLUE_PIN)) {
if (dateScroll == 0) {
LEDMatrix_Date_action();
}
#ifdef USE_DHT
if (indoorScroll == 0) {
LEDMatrix_DHT_action();
}
#endif
#ifdef USE_DHT12
if (outdoorScroll == 0) {
LEDMatrix_DHT12_action();
}
#endif
if (weatherScroll == 0) {
LEDMatrix_Weather_action();
}
}
#endif
#ifdef DEV_BOARD_Witty
if (light05on_state == 1) {
digitalWrite(USE_LIGHT_PIN, HIGH);
}
if (light05on_state == 0) {
digitalWrite(USE_LIGHT_PIN, LOW);
}
}
if (digitalRead(USE_RELAY_PIN)) {
digitalWrite(RGB_LED_RED_PIN, HIGH); digitalWrite(RGB_LED_GREEN_PIN, HIGH);
digitalWrite(RGB_LED_BLUE_PIN, HIGH);
}
if (!digitalRead(USE_RELAY_PIN)) {
digitalWrite(RGB_LED_RED_PIN, LOW); digitalWrite(RGB_LED_GREEN_PIN, LOW);
digitalWrite(RGB_LED_BLUE_PIN, LOW);
}
#endif
#ifdef DEV_BOARD_WiFi_RELAY_MODULE
if (light05on_state == 1) {
digitalWrite(USE_INPUT_PIN, HIGH);
}
if (light05on_state == 0) {
digitalWrite(USE_INPUT_PIN, LOW);
}
#endif
#ifdef USE_TIMER
// Timer start
if (m == timer_m_start && timer_action_start == 1) {
// 12-hour clock
if (am_pm == 12 && ampm == timer_start_ampm_select && h == timer_h_start && m
== timer_m_start && timer_state == 1) {
#ifdef DEV_BOARD_Witty
digitalWrite(USE_LIGHT_PIN, HIGH);
light05on_state = 1;
#endif
digitalWrite(GREEN_PIN, HIGH);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, HIGH); digitalWrite(RGB_LED_GREEN_PIN, HIGH);
digitalWrite(RGB_LED_BLUE_PIN, HIGH);
#endif
#ifdef USE_RGB_LED_STRIP_DRIVER
ledStripColorWipe();
led.setColor(255, 255, 255);
#endif
#ifdef USE_LED_MATRIX
printStringWithShift(" ", stringShiftDelay);
printStringWithShift(timerStartMessage.c_str(), stringShiftDelay);
delay(1000);
printStringWithShift(" ", stringShiftDelay);
delay(waitScroll);
#endif
timer_action_start = 0;
timer_action_stop = 1;
// 24-hour clock
} else if (am_pm == 24 && h == timer_h_start && m == timer_m_start &&
timer_state == 1) {
#ifdef DEV_BOARD_Witty
digitalWrite(USE_LIGHT_PIN, HIGH);
light05on_state = 1;
#endif
digitalWrite(GREEN_PIN, HIGH);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, HIGH); digitalWrite(RGB_LED_GREEN_PIN, HIGH);
digitalWrite(RGB_LED_BLUE_PIN, HIGH);
#endif
#ifdef USE_RGB_LED_STRIP_DRIVER
ledStripColorWipe();
led.setColor(255, 255, 255);
#endif
#ifdef USE_LED_MATRIX
printStringWithShift(" ", stringShiftDelay);
printStringWithShift(timerStartMessage.c_str(), stringShiftDelay);
delay(1000);
printStringWithShift(" ", stringShiftDelay);
delay(waitScroll);
#endif
timer_action_start = 0;
timer_action_stop = 1;
}
}
// Timer stop
if (m == timer_m_stop && timer_action_stop == 1) {
// 12-hour clock
if (am_pm == 12 && ampm == timer_stop_ampm_select && h == timer_h_stop && m ==
timer_m_stop && timer_state == 1) {
#ifdef DEV_BOARD_Witty
digitalWrite(USE_LIGHT_PIN, LOW);
light05on_state = 0;
#endif
digitalWrite(GREEN_PIN, LOW);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, LOW); digitalWrite(RGB_LED_GREEN_PIN, LOW);
digitalWrite(RGB_LED_BLUE_PIN, LOW);
#endif
#ifdef USE_RGB_LED_STRIP_DRIVER
led.setColor();
#endif
#ifdef USE_LED_MATRIX
printStringWithShift(" ", stringShiftDelay);
printStringWithShift(timerStopMessage.c_str(), stringShiftDelay);
delay(1000);
printStringWithShift(" ", stringShiftDelay);
delay(waitScroll);
#endif
timer_action_stop = 0;
timer_action_start = 1;
// 24-hour clock
} else if (am_pm == 24 && h == timer_h_stop && m == timer_m_stop && timer_state
== 1) {
#ifdef DEV_BOARD_Witty
digitalWrite(USE_LIGHT_PIN, LOW);
light05on_state = 0;
#endif
digitalWrite(GREEN_PIN, LOW);
#ifdef USE_RGB_LED_DIRECT
digitalWrite(RGB_LED_RED_PIN, LOW); digitalWrite(RGB_LED_GREEN_PIN, LOW);
digitalWrite(RGB_LED_BLUE_PIN, LOW);
#endif
#ifdef USE_RGB_LED_STRIP_DRIVER
led.setColor();
#endif
#ifdef USE_LED_MATRIX
printStringWithShift(" ", stringShiftDelay);
printStringWithShift(timerStopMessage.c_str(), stringShiftDelay);
delay(1000);
printStringWithShift(" ", stringShiftDelay);
delay(waitScroll);
#endif
timer_action_stop = 0;
timer_action_start = 1;
}
}
#endif
#ifdef USE_MQTT
MQTT_action();
#endif
}

Max7219 Clock DHT11 Esp32
0% (1)
Max7219 Clock DHT11 Esp32
5 pages
60 Projects
No ratings yet
60 Projects
60 pages
m4 r5 o Level Iot Practical Classes Chapter 4 Diffrent Type of Sensors and Actuators
No ratings yet
m4 r5 o Level Iot Practical Classes Chapter 4 Diffrent Type of Sensors and Actuators
15 pages
Iot Lab Experiments
No ratings yet
Iot Lab Experiments
16 pages
Arduino Code
No ratings yet
Arduino Code
21 pages
Manual Adjust For RTC Clock With Arduino and 7-Segment LED
100% (1)
Manual Adjust For RTC Clock With Arduino and 7-Segment LED
21 pages
Gyroscope LED Controller STM32F407 Discovery
No ratings yet
Gyroscope LED Controller STM32F407 Discovery
21 pages
Lab06 - Smart Home Automation Using Sensors
100% (1)
Lab06 - Smart Home Automation Using Sensors
14 pages
ESP32 Coding Cheatsheet Full
No ratings yet
ESP32 Coding Cheatsheet Full
5 pages
ESP32 DHT LED To THINGSBOARD
100% (1)
ESP32 DHT LED To THINGSBOARD
5 pages
CP4291 - IOT Lab Manual
No ratings yet
CP4291 - IOT Lab Manual
72 pages
ESIOT Manual
No ratings yet
ESIOT Manual
23 pages
Embedded System Lab Ii
No ratings yet
Embedded System Lab Ii
28 pages
IoT Lab Manual
No ratings yet
IoT Lab Manual
47 pages
CODE
No ratings yet
CODE
12 pages
Include Include Include Include
No ratings yet
Include Include Include Include
26 pages
Ardunio Basic1
No ratings yet
Ardunio Basic1
19 pages
IoT Programs For Read
No ratings yet
IoT Programs For Read
18 pages
Iot Lab
No ratings yet
Iot Lab
31 pages
531 Iot PDF
No ratings yet
531 Iot PDF
24 pages
SS Lab Experiment Codes - AHKR
No ratings yet
SS Lab Experiment Codes - AHKR
14 pages
Smartboard Arduinomega V1
No ratings yet
Smartboard Arduinomega V1
16 pages
Version 1
No ratings yet
Version 1
14 pages
USER CODE BEGIN Header
No ratings yet
USER CODE BEGIN Header
16 pages
Iot Final All Prac
No ratings yet
Iot Final All Prac
12 pages
IOT ARCHITECTURES and PROTOCOLS Lab Experiments
No ratings yet
IOT ARCHITECTURES and PROTOCOLS Lab Experiments
12 pages
Horloge1 Ino
No ratings yet
Horloge1 Ino
13 pages
Microprocessor and Microcontroller Final Report: "Automatic Braking System"
No ratings yet
Microprocessor and Microcontroller Final Report: "Automatic Braking System"
17 pages
NguyenThienPhuc 2252645 CC02 LAB2
No ratings yet
NguyenThienPhuc 2252645 CC02 LAB2
14 pages
IOT LAB Program Manual
No ratings yet
IOT LAB Program Manual
15 pages
ESP32 MQTT Sensor System
No ratings yet
ESP32 MQTT Sensor System
11 pages
Code 2
No ratings yet
Code 2
7 pages
Cod Fain LED Server WS2812FX
No ratings yet
Cod Fain LED Server WS2812FX
10 pages
Tepe Report
No ratings yet
Tepe Report
10 pages
Exp 4
No ratings yet
Exp 4
10 pages
Laboratory 2
No ratings yet
Laboratory 2
7 pages
Arduino
No ratings yet
Arduino
9 pages
DLD Project Report10
No ratings yet
DLD Project Report10
9 pages
Ebpl Lab
No ratings yet
Ebpl Lab
7 pages
MP 2,3,4
No ratings yet
MP 2,3,4
5 pages
LED Binary Clock Code
No ratings yet
LED Binary Clock Code
7 pages
код4
No ratings yet
код4
7 pages
Arduino LED Matrix Display
No ratings yet
Arduino LED Matrix Display
8 pages
Iot Programs
No ratings yet
Iot Programs
7 pages
Final Arduino Code
No ratings yet
Final Arduino Code
6 pages
Code Manual
No ratings yet
Code Manual
6 pages
FinalCode For ESP32
No ratings yet
FinalCode For ESP32
4 pages
Solution LAB4 IOT
No ratings yet
Solution LAB4 IOT
3 pages
Codigo
No ratings yet
Codigo
5 pages
DHT11 Gas
No ratings yet
DHT11 Gas
5 pages
Iot 5
No ratings yet
Iot 5
3 pages
MC Flores
No ratings yet
MC Flores
3 pages
#Include LibraryLunchboxCommon.h
No ratings yet
#Include LibraryLunchboxCommon.h
2 pages
10sensors Integrated
No ratings yet
10sensors Integrated
2 pages
Semaforo de 2 Secuencias Blynk
No ratings yet
Semaforo de 2 Secuencias Blynk
2 pages
STM32-HLW8012STM32 - LoRa-CAT-HLW8012.Ino at Master WorrajakSTM32-HLW8012 GitHub
No ratings yet
STM32-HLW8012STM32 - LoRa-CAT-HLW8012.Ino at Master WorrajakSTM32-HLW8012 GitHub
1 page