Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Recommended Rotational Speed Range RPM - TC Burrs For High-Performance Applications

    Uploaded by

    Leandro Batista
    This document provides guidance for selecting the recommended rotational speed range for TC burrs for high-performance applications. It lists various material groups and their recommended cutting speed ranges. For a given burr diameter and cutting speed, the rotational speed range can be determined. An example shows how to calculate the rotational speed range for a 12mm burr cutting steels at 450-750m/min.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Recommended Rotational Speed Range RPM - TC Burrs For High-Performance Applications

    Uploaded by

    Leandro Batista
    11 views1 page
    This document provides guidance for selecting the recommended rotational speed range for TC burrs for high-performance applications. It lists various material groups and their recommended cutting speed ranges. For a given burr diameter and cutting speed, the rotational speed range can be determined. An example shows how to calculate the rotational speed range for a 12mm burr cutting steels at 450-750m/min.

    Original Title

    Recommended_rotational_speed_range__RPM__-_TC_burrs_for_high-performance_applications

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides guidance for selecting the recommended rotational speed range for TC burrs for high-performance applications. It lists various material groups and their recommended cutting speed ranges. For a given burr diameter and cutting speed, the rotational speed range can be determined. An example shows how to calculate the rotational speed range for a 12mm burr cutting steels at 450-750m/min.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views1 page

    Recommended Rotational Speed Range RPM - TC Burrs For High-Performance Applications

    Uploaded by

    Leandro Batista
    This document provides guidance for selecting the recommended rotational speed range for TC burrs for high-performance applications. It lists various material groups and their recommended cutting speed ranges. For a given burr diameter and cutting speed, the rotational speed range can be determined. An example shows how to calculate the rotational speed range for a 12mm burr cutting steels at 450-750m/min.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TC burrs for high-performance applications

    ALLROUND cut for versatile use

    Recommended rotational speed range [RPM]


    To determine the recommended cutting speed To determine the recommended rotational
    range [m/min], please proceed as follows: speed range [RPM], please proceed as follows:
    ➊ Select the material group to be machined. ➌ Select the required
    ➋ Establish the cutting speed range. burr diameter.
    ➍ The cutting speed range and the burr
    diameter determine the recommended
    rotational speed range.
    2
    ➊ Material group Application Cut ➋ Cutting speed
    Construction steels, carbon steels,
    Steels
    tool steels, non-alloyed steels, case- Coarse stock
    up to 1,200 N/mm² ALLROUND 450–750 m/min
    hardened steels, cast steel, alloyed removal
    (< 38 HRC)
    Steel, steels
    cast steel Hardened,
    heat-treated steels Tool steels, tempering steels, Coarse stock
    ALLROUND 250–450 m/min
    over 1,200 N/mm² alloyed steels, cast steel removal
    (> 38 HRC)
    Stainless
    Rust and acid-resistant Austenitic and Coarse stock
    steel ALLROUND 450–600 m/min
    steels ferritic stainless steels removal
    (INOX)
    Soft non-ferrous Coarse stock
    Non- Brass, copper, zinc ALLROUND 450–750 m/min
    metals removal
    ferrous
    metals Hard non-ferrous Bronze, titanium/titanium alloys, hard Coarse stock
    ALLROUND 450–600 m/min
    metals aluminium alloys (high Si content) removal
    Cast iron with flake graphite EN-GJL
    (GG), with nodular graphite/nodular
    Grey cast iron, Coarse stock
    Cast iron cast iron EN-GJS (GGG), white an- ALLROUND 450–900 m/min
    white cast iron removal
    nealed cast iron EN-GJMW (GTW),
    black cast iron EN-GJMB (GTS)

    Example: ➍ Cutting speeds [m/min]


    TC burr, ➌
    ALLROUND cut, Burr dia. 250 450 600 750 900
    burr dia. 12 mm. [mm] Rotational speeds [RPM]
    Coarse stock removal on steels 6 13,000 24,000 32,000 40,000 48,000
    up to 1,200 N/mm².
    8 10,000 18,000 24,000 30,000 36,000
    Cutting speed: 450–750 m/min
    Rotational speed range: 10 8,000 14,000 19,000 24,000 29,000
    12,000–20,000 RPM 12 7,000 12,000 16,000 20,000 24,000
    16 5,000 9,000 12,000 15,000 18,000

    Catalogue Page

    2 27

    You might also like