0% found this document useful (0 votes)
41 views

Project Traffic System Control

This document describes a student project to create a 4-way traffic light controller using digital logic circuits. The project involves two students and has an estimated budget of 1143 taka. It will use integrated circuits like timers and counters along with other components like LEDs, resistors, and a power supply to simulate a basic 4-way intersection traffic light that cycles through the four directions. The goal is to control traffic flow and avoid accidents by only allowing vehicles from one direction to proceed at a time with red lights in other directions.

Uploaded by

linehelp195
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
41 views

Project Traffic System Control

This document describes a student project to create a 4-way traffic light controller using digital logic circuits. The project involves two students and has an estimated budget of 1143 taka. It will use integrated circuits like timers and counters along with other components like LEDs, resistors, and a power supply to simulate a basic 4-way intersection traffic light that cycles through the four directions. The goal is to control traffic flow and avoid accidents by only allowing vehicles from one direction to proceed at a time with red lights in other directions.

Uploaded by

linehelp195
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Green University of Bangladesh

Department of Computer Science and Engineering (CSE)


Faculty of Sciences and Engineering
Semester: (Spring, Year:2021), B.Sc. in CSE (Day)

Course Title: Digital Logic Design Lab


Course Code: CSE-204 Section: 203DC

Project Name: Four-way traffic signal control system.

Student Details

Name ID

1. Md. Arif Hasan Rifat 203002049

2. Ismail Hossain 203002013

Submission Date : 28th November 2021

Course Teacher’s Name : Mr. Mozdaher Abdul Quader


Designation : Lecturer
Table of Contents:
1. Execute Summary
2. Project Description
3. Human Resource
4. Proposed Budget

Execute Summary: Traffic light signals are used to control the flow of vehicles.
In recent years, the need of transportation has gained immense importance
for logistics as well as for common human. This has given rise to the number
of vehicles on the road. So now, basic idea is that project we have chosen is a
traffic light controller is to create a 4-way traffic controller through the
concept of digital logic design. The basic idea behind the design is to avoid
accidents of vehicles by providing appropriate signals to different directions
for a limited time slot, thus providing safety against collisions of vehicles.

Project Description: The project we have chosen is 4-way traffic controller. Traffic
signals provide an easy, cheap, and automatic solution to the points where the
vehicles may turn to other directions. In this way a cycle will be established which
will control the traffic. Usually, traffic lights are used at busy intersections to aid
the flow of traffic more smoothly and safely. The method of adding more roads is
not enough, since they will always reach an endpoint, like intersections or traffic
jams. Intersections are controlled mainly by traffic lights and will reduce the
amount of traffic jams, especially during rush hour. For that, we create such a
circuit in which there will be four traffic signals which will turn Green one by one
while the other traffic signals are will be Red, and also light will turn Yellow before
it turns Red again, and that all will be happen simultaneously. For this project, we
created a prototype traffic light model using LEDs. This project actively involved
the use of a digital logic gate, integrated circuit, timer, and counter for our entire
design and circuit simulation to help us analyze the entire system efficiently. It is
just like the standard traffic light kits, but with four directions.
Human Resource:
Team Members: 02

Department of CSE
Proposed Budget:

Components Unit Price(Taka) Quantity(Pieces) Price(Taka)

555 Timer IC 15 1 15
7473 IC 35 2 70
7408 IC 20 1 20
10 Bit Counter-4017 30 1 30

7404 IC 25 8 200
7408 IC 32 4 128
Capacitors 5 3 15
Resistors 5 3 15
Diode 5 12 60
5V DC Power Supply 100 1 100
Potentiometer 30 1 30
Breadboard 100 2 200
LED 5 12 60
Wires ------ ------- 100
Others ------- ------- 100
Total= 1143

So, this is our total estimated budget which is only 1143 taka.

You might also like