Scribd
Upload
54 views7 pages

Synopsis Final Project

The document proposes an Arduino-based automated water dispenser project that allows for custom fluid volumes, uses an ultrasonic sensor to prevent overflow, and checks available fluid. The objectives are efficient water management, user convenience through a customizable interface, and integrating technology like Arduino and ultrasonics. It will be designed using tools like Arduino IDE and EasyEDA, then tested on a breadboard and PCB. Components include an Arduino Uno, ultrasonic sensor, relay, and water pump. The timeline outlines tasks from circuit analysis to report writing over 3 weeks in December.

Uploaded by

kartikeyorder3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views7 pages

Synopsis Final Project

The document proposes an Arduino-based automated water dispenser project that allows for custom fluid volumes, uses an ultrasonic sensor to prevent overflow, and checks available fluid. The objectives are efficient water management, user convenience through a customizable interface, and integrating technology like Arduino and ultrasonics. It will be designed using tools like Arduino IDE and EasyEDA, then tested on a breadboard and PCB. Components include an Arduino Uno, ultrasonic sensor, relay, and water pump. The timeline outlines tasks from circuit analysis to report writing over 3 weeks in December.

Uploaded by

kartikeyorder3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Automatic Water Dispenser

PROJECT SYNOPSIS
SMART FLUID DISPENSER WITH INTEGRATED
PRECISION METER

Bachelor of Technology
Electronics and Communication Engineering
Proposed by
Ashutosh Kumar Tiwari
(200013125065)
Rohit Kumar
(200013095031)
Kartikey Pandey
(200013125029)
Saurabh Mishra
(200013125041)

Guided by

Dr. Anand Ranjan

FACULTY OF ENGINEERING AND


TECHNOLOGY
UNIVERSITY OF LUCKNOW, LUCKNOW
2022 – 23
Introduction:
● Custom Input Capability: Our Arduino-based Automated Water Dispenser
allows users to input custom fluid volumes effortlessly, departing from
predefined options, for a personalized dispensing experience.
● Efficient Free-Flow Operation: The dispenser features an efficient free-
flow mechanism, ensuring water flows until the utensil reaches its capacity.
● Ultrasonic Sensor Technology: Employing an ultrasonic sensor, the system
detects when the utensil is full, automatically stopping the dispensing
process to prevent overflow and wastage.
● Smart Fluid Availability Check: When a custom volume is entered, the
dispenser checks the available fluid in storage to ensure it meets the
requested volume, preventing inadequate dispensing.

Objective and Scope of Usage:


Certainly! Here are possible objectives and the scope of usage for the Arduino-
based Automated Water Dispenser project:

Objectives:
1. Efficient Water Management: To enable precise and customized
dispensing of water, optimizing its usage and preventing wastage.
2. User Convenience: To provide users with a user-friendly interface
for easily selecting and dispensing desired water volumes according to
their specific needs.
3. Technological Innovation: To integrate Arduino-based automation
and ultrasonic sensor technology for a smart and efficient water
dispensing system.

Scope of Usage:
1. Households: Suitable for use in households, kitchens, or offices to
facilitate controlled and tailored water dispensing for various purposes
like cooking, drinking, or filling containers.
2. Commercial Establishments: Applicable in restaurants, cafes, or
public places where precise water dispensing is required, ensuring
accurate portioning for beverages or cooking.
3. Industrial Applications: Potential utilization in industries or
manufacturing units where controlled water supply is necessary for
specific processes or machinery.
Advantages

● Customized Dispensing: Enables users to input custom fluid volumes for


tailored and personalized usage.

● Efficient Resource Use: Prevents wastage by automatically stopping


dispensing when the utensil reaches capacity, thanks to the ultrasonic sensor
technology.

● Enhanced User Experience: Simplifies user interaction through a user-


friendly interface, ensuring a seamless and convenient dispensing process.

Methodology/ Planning of work


1. Design and analyze the circuit as per the requirement.
2. Search and identify applicable and efficient modules.
3. After simulation, we will implement the circuit on the breadboard for verifying
the circuit.
4. After implementing on the breadboard, with the help of ARDUINO IDE
command will be coded onto Arduino microcontroller.
5. EasyEDA will be used for designing PCB.
6. Breadboard implemented circuit will be implemented on the PCB.
7. Report Preparation

Hardware used: Software used:


1. Arduino Uno 1. Arduino IDE
2. Ultrasonic Sensor 2. EasyEDA
3. 5V RELAY 3. Proteus
4. Buzzer
5. Bluetooth module
6. Resistors
7. LEDs
8. Water Pump
9. N-channel Mosfet
10.BC 548 Transistor
11.12v,1A Adapter
12.Jumper Wire
13.Breadboard

Circuit Diagram (Arduino and module interfacing):


Projected Timeline:

1-4 5-8 9-13 14-16 17-21

(December) (December) (December) (December) (December)

Task 1:

Circuit Analysis &


Module Identification

Task 2:

Software simulation

and breadboard

designing

Task 3:

Mounting of

Components

Task 4:

Working on

Different physical

Parameters which

Will affect our

Project.
Task 5:

Report writing
CONCLUSIONS:

We had briefly described the objective and technicality of our project clearly. We
hereby declare all the points regarding our project. We will be thankful for your
assent to our project so that we can begin the work as soon as possible.

References:
[1] -Circuit Designed on https://www.circuito.io
[2]https://www.circuito.io/static/reply/index.htmlsolutionId=658491cc25d90f002e
d9cd9a&solutionPath=storage.circuito.io [Circuit Discription]

You might also like