88 Best Homemade Sanding Tools

from HomemadeTools.net

This ebook contains the 88 best homemade

sanding tools from HomemadeTools.net.

Click on any sanding tool to see more photos,

details, or videos of the tool.

For the newest homemade sanding tools, click

the link below:

Click here for

the newest sanding tools

Page 2 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: meanwhileinthegarage

Homemade belt grinder constructed from

tubing, steel plate, contact wheels, a switch,
and an electric motor.

Click here for more details on: Belt Grinder

Page 3 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Surface Grinding Attachment

by: JKeetonKnives

Homemade surface grinding attachment

constructed from a sliding table, a slider
mechanism, bar stock, contact wheel, and
locking levers. Used in conjunction with a belt
grinder.

Click here for more details on: Surface Grinding Attachment

Page 4 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Twin Belt Sander

by: Carlos B

Homemade twin belt sander constructed from

an electric motor, homemade aluminum
castings, bar stock, springs, and contact
wheels.

Click here for more details on: Twin Belt Sander

Page 5 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Angle Grinder Sanding Attachment

by: Tuomas

Homemade angle grinder sanding attachment

constructed from steel plate, sheetmetal,
spring washers, and wheels. Used to sand
pipe and tubing.

Click here for more details on: Angle Grinder Sanding Attachment

Page 6 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Tower Sander
by: Bellevue Woodshop

Homemade tower sander constructed from

plywood, pipe, threaded rod, bearings, and a
drill. Removes the need to replace the
sanding drum with a different diameter.

Click here for more details on: Tower Sander

Page 7 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Portable Belt Grinder

by: barberorp

Homemade portable belt grinder powered by

a rotary tool.

Click here for more details on: Portable Belt Grinder

Page 8 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Sander
by: Tuomas

Homemade belt sander adapted from a bench

grinder. Fabricated from flat stock, steel plate,
bearings, and hardware.

Click here for more details on: Belt Sander

Page 9 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Drum Sander
by: Beserkleyboy

Homemade drum sander constructed from

marine plywood, MDF, oak, and shafting. The
drum is constructed from melamine and
driven off a table saw arbor.

Click here for more details on: Drum Sander

Page 10 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Sander
by: Bellevue Woodshop

Homemade belt sander constructed from

plywood, bearings, and a surplus drill. 1-inch
belt allows sanding in awkward spots.

Click here for more details on: Belt Sander

Page 11 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Dremel EZ Lock Sanding Disc

by: mklotz

Homemade Dremel EZ Lock sanding disc

constructed from a surplus EZ Lock fitting,
plywood, a screw, and self-adhesive
sandpaper. Can also be used with other
rotary tools that use a 1/8" mandrel.

Click here for more details on: Dremel EZ Lock Sanding Disc

Page 12 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: Gears and Arms

Homemade belt grinder constructed from

tubing, a spring, steel stock, contact wheels,
and a surplus treadmill motor.

Click here for more details on: Belt Grinder

Page 13 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Handheld Power Sander

by: th62

Homemade handheld power sander

constructed from Delrin, PVC, and steel
bushings. Motor is from a surplus cordless
tool.

Click here for more details on: Handheld Power Sander

Page 14 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Dual Belt Grinder and Sander

by: garycullen

Homemade dual belt grinder and sander

constructed from a surplus grinder, steel
plate, and grinding wheel.

Click here for more details on: Dual Belt Grinder and Sander

Page 15 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Sanding Tool
by: PB Machines

Homemade sanding tool constructed from bar

and steel stock, and springs. Uses sanding
belts.

Click here for more details on: Sanding Tool

Page 16 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Power File
by: Tuomas

Homemade power file constructed from

tubing, steel plate, bearings, bar stock, bolts,
and an angle grinder. With a mount, it can
function as a belt grinder.

Click here for more details on: Power File

Page 17 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder Attachment

by: garycullen

Homemade belt grinder attachment

constructed from steel stock, plate, bearings,
and rubber rollers.

Click here for more details on: Belt Grinder Attachment

Page 18 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Bore Sanding Tool

by: Christophe Mineau

Homemade bore sanding tool constructed

from a length of metal rod and a rubber band.
Intended to be used with an electric drill.

Click here for more details on: Bore Sanding Tool

Page 19 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Tiny Sanding Disc

by: mklotz

Homemade tiny sanding disc constructed

from a nail and adhesive backed sandpaper.
Fits in the collet of a rotary tool.

Click here for more details on: Tiny Sanding Disc

Page 20 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: Vyacheslav.Nevolya

Homemade belt grinder constructed from

angle iron, steel plate, homemade aluminum
contact wheels, bearings, and an electric
motor.

Click here for more details on: Belt Grinder

Page 21 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Desktop Disc Sander

by: cuttransformglue

Homemade desktop disc sander constructed

from MDF and a 19V electric motor. Parts
were cut on a laser CNC.

Click here for more details on: Desktop Disc Sander

Page 22 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander
by: Bricoleando

Homemade disc sander constructed from

plywood, lumber, an electric motor, and a
switch.

Click here for more details on: Disc Sander

Page 23 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: mr95gst

Homemade belt grinder constructed from

surplus aluminum and a treadmill motor.
Rollers were homemade from cast aluminum.

Click here for more details on: Belt Grinder

Page 24 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Grinder Sander
by: Tuomas

Homemade grinder-sander constructed from

a surplus wood shredder, steel plate, and bar
stock.

Click here for more details on: Grinder Sander

Page 25 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander
by: Christophe Mineau

Homemade disc sander constructed from

wood and based on the John Heisz model.
Features a pivoting table system.

Click here for more details on: Disc Sander

Page 26 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder and Sander

by: TROEHL

Homemade belt grinder and sander fabricated

from steel, acrylic, and hardware. Driven by a
1.5 HP motor with infinitely variable speed
control. Equipped with a 60x1700mm belt.

Click here for more details on: Belt Grinder and Sander

Page 27 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Radius Forming Jig

by: bobs409

Homemade radius forming jig constructed

from steel plate. Used as an attachment to a
homemade belt grinder.

Click here for more details on: Radius Forming Jig

Page 28 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Dremel Belt Sander

by: Tuomas

Homemade Dremel belt sander constructed

from surplus tubing, steel plate, springs, a
homemade pulley, and skateboard wheels.

Click here for more details on: Dremel Belt Sander

Page 29 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Variable Speed Belt Sander

by: Rorschach

Homemade variable speed belt sander

constructed from a surplus lathe headstock
and a belt sanding assembly. Speed can be
adjusted from 500-2000 RPM.

Click here for more details on: Variable Speed Belt Sander

Page 30 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Rotary Sandpaper Holder

by: Mr.DK DIY

Homemade rotary sandpaper holder

constructed from a surplus electric motor
rotor. Used in conjunction with a hand drill.

Click here for more details on: Rotary Sandpaper Holder

Page 31 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Bow Sander
by: Mikhandmaker

Homemade bow sander constructed from

lumber, leather, and sandpaper.

Click here for more details on: Bow Sander

Page 32 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: barts metalwork

Homemade belt grinder constructed from

steel plate, bar stock, tubing, bearings,
contact wheels, and an electric motor. Uses
2x72 belts.

Click here for more details on: Belt Grinder

Page 33 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Rotary Tool Sanding Drum

by: PowerMk

Homemade rotary tool sanding drum

constructed from a sandpaper strip and bar
stock. Cyanoacrylate was used to bond the
sandpaper.

Click here for more details on: Rotary Tool Sanding Drum

Page 34 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Double Disc Sander

by: Bellevue Woodshop

Homemade double disc sander constructed

from plywood, bearings, shafting, belts, and
an electric motor.

Click here for more details on: Double Disc Sander

Page 35 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

2x72 Belt Grinder

by: bobs409

Homemade 2x72 belt grinder constructed

from aluminum and steel stock, an electric
motor, a VFD, bearings, and a switch panel.
An accompanying rolling stand was
constructed to mount the belt grinder on.

Click here for more details on: 2x72 Belt Grinder

Page 36 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: TomBuilder

Homemade belt grinder driven by a 3.3kW

motor via a digital speed and direction
controller. Equipped with a 5.3" x 78.5" belt
that can be oriented vertically or horizontally.

Click here for more details on: Belt Grinder

Page 37 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Scroll Saw Sanding Blade

by: Christophe Mineau

Homemade scroll saw sanding blade

fashioned from a standard blade, a sandpaper
strip, and double-sided tape.

Click here for more details on: Scroll Saw Sanding Blade

Page 38 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: winkys workshop

Homemade belt grinder constructed from

tubing, steel plate, pipe, bar stock, a spring,
and an electric motor.

Click here for more details on: Belt Grinder

Page 39 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: PWelder

Homemade belt grinder constructed from

steel plate, bar stock, threaded rod,
off-the-shelf contact wheels, springs, a VFD,
and an electric motor.

Click here for more details on: Belt Grinder

Page 40 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc and Inflatable Drum Sander

by: lastgoodusername

Homemade disc and inflatable drum sander

constructed from a surplus base, electric
motor, melamine, pipe, and an off-the-shelf
drum.

Click here for more details on: Disc and Inflatable Drum Sander

Page 41 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Sander
by: Radioman

Homemade belt sander constructed from

tubing, an electric motor, steel plate, bearings,
and homemade aluminum contact wheels.

Click here for more details on: Belt Sander

Page 42 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Angle Grinder Sander Attachment

by: Tuomas

Homemade angle grinder sander attachment

constructed from bar stock, steel plate,
bearings, and a skateboard wheel.

Click here for more details on: Angle Grinder Sander Attachment

Page 43 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Dremel Belt Sander Attachment

by: Tuomas

Homemade Dremel belt sander attachment

constructed from steel stock and skate
wheels.

Click here for more details on: Dremel Belt Sander Attachment

Page 44 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Sanding Block
by: Spira Knives

Homemade sanding block constructed from

lumber, steel rod, and rubber bands. The
combination of rods and rubber bands hold
the sandpaper in place.

Click here for more details on: Sanding Block

Page 45 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Sander
by: tekcraft

Homemade belt sander constructed from

steel plate, angle iron, contact wheels, and an
electric motor. Uses 2x48 belts.

Click here for more details on: Belt Sander

Page 46 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Sander Attachment

by: garycullen

Homemade belt sander attachment

constructed from bar stock, contact wheels,
and bolts.

Click here for more details on: Belt Sander Attachment

Page 47 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Sanding Disc Adhesive Restoration

by: editor at glue-it.com

Homemade sanding disc adhesive restoration

constructed by heating up the dried up glue
on the pad with a heat gun. The same
technique can be used to remove sanding
discs.

Click here for more details on: Sanding Disc Adhesive Restoration

Page 48 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Grinder Wheel Sanding Attachment

by: bobs409

Homemade wheel sanding attachment for a

2x72 belt grinder. Fashioned from aluminum,
rubber, bearings, and hardware. Can be
oriented vertically or horizontally.

Click here for more details on: Grinder Wheel Sanding Attachment

Page 49 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: chiasson

Homemade belt grinder constructed from

tubing, bearings, contact wheels, pulleys, and
an electric motor.

Click here for more details on: Belt Grinder

Page 50 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Lathe Drum Sanding Attachment

by: darkoford

Homemade lathe drum sanding attachment

constructed from lumber and threaded rod.

Click here for more details on: Lathe Drum Sanding Attachment

Page 51 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Oscillating Spindle Sander

by: Mr.DK DIY

Homemade oscillating spindle sander

constructed from plywood, a tree branch,
drawer slides, angle iron, metal straps, a
wiper motor, and a surplus angle grinder. The
wiper motor is the drive unit for the oscillating
mechanism.

Click here for more details on: Oscillating Spindle Sander

Page 52 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: Es Welding

Homemade belt grinder constructed from

tubing, bar stock, steel plate, contact wheels,
and an electric motor. Uses 2x48 belts.

Click here for more details on: Belt Grinder

Page 53 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander Angle Plate

by: 737mechanic

Homemade disc sander angle plate

constructed from steel plate, bar stock, and
bolts. Used to determine the correct angle for
grinding tool bits.

Click here for more details on: Disc Sander Angle Plate

Page 54 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc and Drum Sander

by: Nick Jonkman

Homemade disc and drum sander

constructed from lumber, steel plate,
aluminum, and an electric motor. 3/4" shaft
allows other accessories to be mounted.

Click here for more details on: Disc and Drum Sander

Page 55 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: Zengineer

Homemade belt grinder constructed from

tubing, angle iron, steel plate, contact wheels,
an electric motor, and a spring. Uses 2x72
inch belts.

Click here for more details on: Belt Grinder

Page 56 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander
by: Dan Larsen

Homemade disc sander adapted from a table

saw. Equipped with a 20" disc, direction
switch, and a dust collection exhaust.
Constructed from wood, pulleys, pillow block
bearings, and hardware.

Click here for more details on: Disc Sander

Page 57 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Sawzall Sanding Blade

by: peteco

Homemade Sawzall sanding blade adapted

from a 3" sanding belt. Intended to facilitate
the process of sanding between deck boards.

Click here for more details on: Sawzall Sanding Blade

Page 58 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Grinder Sander
by: Lahis

Homemade grinder/sander constructed from

an electric motor, arbor, speed controller,
plywood, and an abrasive disc.

Click here for more details on: Grinder Sander

Page 59 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Jigsaw Sanding Attachment

by: Christofix

Homemade jigsaw sanding attachment

constructed from lumber, screws, T-track, a
surplus jigsaw blade, and sandpaper.

Click here for more details on: Jigsaw Sanding Attachment

Page 60 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Drum Sander
by: RCTURKA

Homemade drum sander constructed from

plywood, MDF, threaded rod, nuts, and
bearings. A bench grinder is used to drive the
unit.

Click here for more details on: Drum Sander

Page 61 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Radius Sanding Jig

by: Unisawyer

Homemade radius sanding jig constructed

from MDF, a dowel, screws, and locking
knobs. Intended to be used with a belt sander.

Click here for more details on: Radius Sanding Jig

Page 62 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Drum Sander
by: Christofix

Homemade drum sander attachment for a drill

press. Constructed from plywood, pallet
wood, bearings, and hardware.

Click here for more details on: Drum Sander

Page 63 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: fawabros

Homemade belt grinder constructed from

tubing, bar stock, bearings, nuts, and an
angle grinder.

Click here for more details on: Belt Grinder

Page 64 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander
by: diyfixman

Homemade disc sander constructed from an

electric motor, wooden board, steel plate, bar
stock, and a switch.

Click here for more details on: Disc Sander

Page 65 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander
by: sandho

Homemade disc sander constructed from

steel brackets, aluminum plate, a sanding disc
attachment, hoses, clamps, and a surplus
saw.

Click here for more details on: Disc Sander

Page 66 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Fret Sanding Block

by: Captainleeward

Homemade fret sanding block constructed

from aluminum tubing.

Click here for more details on: Fret Sanding Block

Page 67 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Articulating Work Rest

by: House_Work

Homemade articulating work rest constructed

from steel plate, tubing, threaded rod, and
nuts. Complements a homemade belt grinder.

Click here for more details on: Articulating Work Rest

Page 68 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Thickness Sander
by: threesixesinarow

Homemade thickness sander constructed

from steel plate, surplus wiper motor and
washing machine wringer, ball bearings,
rollers, and channel. Uses 3x24 belts.

Click here for more details on: Thickness Sander

Page 69 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander
by: liberal

Homemade disc sander driven by a surplus

washing machine motor. Fabricated from
steel plate, square tubing, plywood, pulleys,
bearings, and hardware.

Click here for more details on: Disc Sander

Page 70 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Sanding Blocks
by: mklotz

Homemade sanding blocks constructed from

lumber and screws.

Click here for more details on: Sanding Blocks

Page 71 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Sandpaper Dispenser
by: Tim Pettigrew

Homemade sandpaper dispenser constructed

from plywood, plastic pipe, and hacksaw
blades.

Click here for more details on: Sandpaper Dispenser

Page 72 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Grinder Contact Wheel Modification

by: bobs409

Homemade belt grinder contact wheel

modification constructed from an off-the-shelf
contact wheel, tubing, and bolts. Used for
rough grinding work.

Click here for more details on: Grinder Contact Wheel Modification

Page 73 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder Drive Wheel

by: House_Work

Homemade belt grinder drive wheel

constructed from 3D-printed plastic.

Click here for more details on: Belt Grinder Drive Wheel

Page 74 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Multi Sander
by: Jambutty john

Homemade multi sander constructed from

lumber, grinding wheels, a power switch, and
an electric drill.

Click here for more details on: Multi Sander

Page 75 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Sander
by: Kwandotechnic

Homemade belt sander constructed from

tubing, steel plate, bearings, nuts, bolts and a
surplus angle grinder. Design allows three
sides to be used.

Click here for more details on: Belt Sander

Page 76 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Thicknessing Attachment
by: hammer

Homemade thicknessing attachment intended

for utilization in conjunction with a belt sander.

Click here for more details on: Thicknessing Attachment

Page 77 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Sanding Bow
by: Michael Paley

Homemade sanding bow constructed from

plywood, T-nuts, bolts, wing nuts, and locking
knobs.

Click here for more details on: Sanding Bow

Page 78 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Bench Grinder Rest

by: House_Work

Homemade bench grinder rest constructed

from tubing and steel plate. Accommodates a
custom bench grinder's varied belt
configurations.

Click here for more details on: Bench Grinder Rest

Page 79 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander
by: Vyacheslav.Nevolya

Homemade disc sander constructed from

angle iron, tubing, lumber, and a surplus
washing machine motor. A carrying handle
ensures portability.

Click here for more details on: Disc Sander

Page 80 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Oscillating Edge Spindle Sander

by: woodenworldenic

Homemade oscillating edge spindle sander

constructed from lumber, a motor, gearbox,
threaded rod, and screws.

Click here for more details on: Oscillating Edge Spindle Sander

Page 81 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Grinder Tracking Wheel Mechanism

by: House_Work

Homemade belt grinder tracking wheel

mechanism constructed from steel plate, nuts,
and bolts. Allows the operator to change the
angle of the contact wheel on the grinder.

Click here for more details on: Grinder Tracking Wheel Mechanism

Page 82 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Spindle Sander
by: Andy T

Homemade spindle sander constructed from

plywood, shafting, electric motors, and a
crankshaft mechanism.

Click here for more details on: Spindle Sander

Page 83 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Flat Sanding Caul

by: Christophe Mineau

Homemade flat sanding caul constructed from

lumber, window glass, and sandpaper. Used
in luthiery work to level the frets of a
fingerboard.

Click here for more details on: Flat Sanding Caul

Page 84 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Belt Grinder
by: warsztatOdZera

Homemade belt grinder constructed from

tubing, steel plate, contact wheels, and an
electric motor. Uses 2x72 sanding belts.

Click here for more details on: Belt Grinder

Page 85 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Thickness Sander
by: Christophe Mineau

Homemade thickness sander constructed

from wood and powered by a repurposed
washing machine motor. Incorporates a
wooden gear-based lift mechanism.

Click here for more details on: Thickness Sander

Page 86 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Sanding Gouge
by: Christophe Mineau

Homemade sanding gouge constructed from

threaded rod, nuts, and a repurposed roller
blade ball bearing. Sandpaper is affixed by
means of a velcro patch.

Click here for more details on: Sanding Gouge

Page 87 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Disc Sander
by: h7eh7e

Homemade disc sander constructed from

tubing, steel plate, threaded rod, and a
surplus bench grinder. Adjustable for angle.

Click here for more details on: Disc Sander

Page 88 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Downdraft Sanding Table

by: Como Fiz

Homemade downdraft sanding table

constructed from plywood, pegboard, and
PVC pipe.

Click here for more details on: Downdraft Sanding Table

Page 89 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

Random Orbital Sander Attachment

by: Tuomas

Homemade random orbital sander attachment

constructed from bar stock, steel plate,
bearings, bolts, and a backing plate. Off
center mounting provides the random
movement. Attaches to an angle grinder.

Click here for more details on: Random Orbital Sander Attachment

Page 90 of 91
 88 Best Homemade Sanding Tools from HomemadeTools.net

More top homemade tools from HomemadeTools.net

For the newest homemade sanding tools from HomemadeTools.net, click
the link below:

Click here for

the newest sanding tools

For more of the best homemade tools from HomemadeTools.net, click the
link below:

Click here for more of the

best homemade tools

Page 91 of 91