Crochet pattern | US crochet terms

ENGLISH

REVERSIBLE TULIP FAIRY

Reversible Flower series
Difficulty Level: Advanced Beginner
Crochet pattern by Febby Pranajaya @chibiscraft
 Crochet pattern by Febby Pranajaya @chibiscraft 1

DISCLAIMER

Hello! Thank you for choosing this pattern. This pattern is for your personal use only.
Please do not reproduce, distribute, or resell it, in parts or in its entirety, in any
format or translation. However, you may sell finished handmade items made from this
pattern as long as they were made by yourself in a limited number. Please give credit to
Chibiscraft as the pattern designer.

If you are going to share pictures on instagram, please remember to:

- insert *Pattern by @chibiscraft
- use hashtag #chibiscraftpattern

Please do not hesitate to contact me if you need any clarifications.

e-mail: [email protected] https://www.facebook.com/chibiscraft

https://www.instagram.com/chibiscraft

IMPORTANT TIPS: ABBREVIATIONS

It is recommended to crochet tightly by using This pattern is written in US Standard Crochet
a smaller crochet hook. Terms, and assumes knowledge of basic stitches.
Try to work every part using the same stitch R = row/round
tension. MR = magic ring
Count your stitches. st = stitch/stitches
Use a stitch marker or a piece of yarn to mark sc = single crochet
beginning/ending of the round. inc = sc increase (2 sc in the same st)
Each round is worked in a continuous spiral. inc3 = 3 sc in the same st
Do not join rounds with slip stitch or turn dec = sc decrease (crochet 2 st together)
unless stated otherwise. ch = chain
Crochet through both loops unless stated sl st = slip stitch
otherwise. hdc = half double crochet
It is highly recommended that you read hdc inc = 2 hdc in the same st
through the entire pattern before starting to dc = double crochet
crochet. FL = Front loop/loops
BL = Back loop/loops
BLO = BL only
MATERIAL FLO = FL only
2.0 mm hook or size suitable for yarn used [____] = repeat sequence between the square
Yarn/tapestry needle, embroidery needle brackets for the indicated number of times
Fiberfill for stuffing (__) = stitch count at the end of the row/round
Yarn in the same size (I used 4 ply, cotton
blend yarn/cotton 60% and acrylic 40%) in the
following colors: pink, peach, green, skin color, DIMENSION
pale blue, black. The size will vary, depending on the yarn used. If
Thin wire (diameter 0.5 mm), 8 cm long. you use the same materials as I did, the finished
Scissors amigurumi is about 10 cm tall.

©2022 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 2

SPECIAL STITCHES

Invisible Finish
After completing the last st, cut the yarn
and pull on the loop to draw the tail. Using
the tapestry needle, skip the next st, and
insert the needle from front to back, under
both loops. Go back to the last st, and insert
the needle through the back loop of this st.
Pull on the tail.

©2022 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 3

PETALS
Make 3 in peach and 3 in pink
Please work a little bit loosely while crocheting the
petals/skirt.
Crochet around the foundation chain. Work in
rows.
R1: Make foundation ch: 13ch, start from the
second loop from the hook: 4hdc, 5dc, 2hdc,
inc3 at the last chain. Then continue to work
using the other side of the chains: 2hdc, 5dc,
4hdc (25), 1ch
R2: turn, 4hdc, hdc inc, 6hdc, 3inc, 6hdc, hdc inc,
4hdc (30), 1ch
R3: turn, 8hdc, hdc inc, 3hdc, [sc, inc]x3, 3hdc, hdc
inc, 8hdc (35), 1ch
R4: turn, 14sc, [inc, 2sc]x3, 12sc (38), 1ch
R5: turn, 17sc, hdc inc3, 2sl st, hdc inc3, 17sc (42)
Fasten off, leaving about 10 cm long tail.
Now we will work the skirt. Please remember to
work a little bit loosely and use normal decrease
instead of invisible decrease (only when working
the petal skirt). Attach a new piece of pink/peach
yarn onto the flat side of the pink petal.

Make 1ch, then work in rounds:

R1: 12sc x 3 petals (36)

For each color, join the petals with the yarn tail
using the whip stitch technique in 4 stitches. Do
this until all the petals in the same colors are
joined as a circle.

1
2
3
4

R2: [4sc, dec]x6 (30)

R3: [3sc, dec]x6 (24)

©2022 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 4

For pink petals, fasten off, leaving a yarn tail. Hide Continue working the skirt by working through
and secure the tail by weaving in ends. Count the 4 both pink and peach petals.
st from the last st and mark it with a stitch marker. R4 : [2sc, dec]x6 (18)
last st Fasten off, leaving a yarn tail. Do an invisible finish.
Count 3 st before the last st (4 st before the st
made by the invisible finish), and mark it with a
1 2 3 4
stitch marker.
Hide and secure the tail by weaving in ends. The
skirt will be joined together with the body later.

For peach petal, do not fasten off, we will continue

to join both petals.

Hold both petals with the right/good side facing

outside. Position the pink petal so that the marked
st matching up with the last st of the peach petal. last st
st made by
right/good side invisible finish 1 23
wrong/ugly side

HEAD - BODY - STEM

marked st of pink petal HEAD
last st of
peach petal Work tightly. Start with pink yarn.
R1: 5 sc in MR (5)
R2: 5inc (10)
R3: 10sc (10)
R4: [sc, inc]x5 (15)
R5: 15sc (15)
R6: [2sc, inc]x5 (20)
R7: [sc, inc, 2sc, inc]x4 (28)
R8: [2sc, inc, 3sc, inc]x4 (36)

©2022 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 5

Starting from R9, we will crochet using pink and R20: Make 1ch, FLO [sc, inc]x6 (18)
skin color yarn alternately. To simplify the writing, Change to green.
the light peach color of the font below R21-24 (4 rounds): 18sc (18)
corresponds to the skin color yarn. R25a: FLO [5ch, sl st to the next st]x18 (18)
R9: 15sc, 6sc, 15sc (36) Fasten off and cut the yarn. The first back loop
R10: 14sc, 8sc, 14sc (36) of R24 (you worked R25a FLO) will be used for
R11: 13sc, 10sc, 13sc (36) joining the petal skirt with the body.
R12-15 (4 rounds): 13sc, 11sc, 12sc (36) first back loop of R24
R16: [4sc, dec]x2, 2sc, 2sc, dec, 4sc, dec,
[4sc, dec]x2 (30)
R17: [3sc, dec]x2, 2sc, sc, dec, 3sc, dec,
[3sc, dec]x2 (24)
R18: [2sc, dec]x2, 2sc, dec, 2sc, dec,
[2sc, dec]x2 (18)
R19: [sc, dec]x6 (12)
Stuff the head firmly with fiberfill.
R20: BLO 6dec (6)
Fasten off, leave a yarn tail. Using your yarn Hold the skirt with the pink petal facing outside.
needle, weave the yarn tail through the front loop Insert the body so the last round the of body
of each remaining stitch and pull it tight to close. and the skirt meet together. With a new piece of
Hide the tail. Mark the second FL after the first st green yarn, insert the hook through the
of the R18 with a stitch marker. marked st of the skirt and then also the first
back loop of R24 of the body, and make a loop.

R25b: 1ch, 1sc in the first st. Continue working

through both layers (petal skirt and BLO of the
BODY & STEM body): 17sc (18)
The body is worked at the FL left of R19 (you
worked R20 BLO). Attach the skin color yarn at first back loop of R24 of the body
marked st.
back loop of the body

marked st of the skirt

both loop of the skirt
Marked st
the first st
of R19

©2022 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 6

Stop for a while to check whether the position of Using the yarn needle, weave the yarn tail through
the skirt is correct as shown in picture below. the front loop of each remaining stitch and pull it
If the position of the tight to close. Hide the tail.
skirt doesn’t match Take another piece of green yarn. Hold the flower
the picture, you can upside down. Attach the green yarn at the FL left
adjust it by moving of R25b (you worked R26 BLO).
the st of the skirt
where you join the
skirt to the body.

Make 1ch. Then work 18sc around. Sl st to the first

sc. Fasten off. Hide and secure the tail.

Continue to crochet using the green yarn.

R26: BLO 18sc (18)
Start to stuff the body with fiberfill and continue
stuffing as you go.
R27: [4sc, dec]x3. (15)
R28: [3sc, dec]x3 (12)
R29: [2sc, dec]x3 (9)
R30-41 (12 rounds): 9sc (9)
stuff the stem firmly with fiberfill.
R42: [sc, dec]x3 (6)
Fasten off. Leave a tail.
LEAVES (make 2)
Start with green yarn.
Optional: you can use wire so the stem can be
R1: 6sc in MR (6)
articulated. Cut a thin wire (diameter 0.5 mm)
R2: [2sc, inc]x2 (8)
about 8 cm long, bend one of the tips, and wrap it
R3: 8sc (8)
with a little fiberfill and tape. Then insert the wire
R4: [3sc, inc]x2 (10)
into the stem carefully until all the wire goes inside
R5-7 (3 rounds): 10sc (10)
the stem.
R8: [3sc, dec]x2 (8)
R9: 8sc (8)
R10: [2sc, dec]x2 (6)
R11: 6sc (6)
No need to stuff. Fasten off. Leave a long tail for
sewing. Flatten and attach the leaves to the stem,
between R41-42 and R39-40 (see picture at the
last page).

©2022 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 7

ARM (make 2)
Start with skin color yarn.
R1: 5sc in MR (5)
R2-10 (9 rounds): 5sc (5) R9
Fasten off. Leave a long tail for sewing. R10
R11
Flatten and attach the arms to the body, between
R20-21 (see pictures at the last page). R13
R14
R15

WINGS
Start with pale blue yarn. Make 1sc in a MR,
then continue to work in the MR:
Big wing: Make 6ch. Start from the second loop
FACE & HAIR from the hook: hdc inc, 2hdc, 2sc, 2ch. Continue
Embroider hair bangs on the face between working at the other side of the chain: 2sc,
R9-11 using pink yarn. Look at the picture 2hdc, 3hdc in the last st. Sl st to the first st, and
below for a step-by-step of making hair make another sl st in the next 5 st. Make a sl st
bangs. through the chain gap and the MR. 1sc in the
Embroider eyes on the face using black yarn, MR.
at R13, 3st apart. Make one more big wing with the same
Embroider eyelashes (R13) and eyebrows instructions. Then continue to make small wing.
(between R10-11) using black yarn (1 ply only). Small wing: Make 4ch. Start from the second
Embroider a smile at R15, using pink yarn (1 loop from the hook: hdc inc, 2sc, 2ch. Continue
ply only). working at the other side of the chain: 2sc, hdc
Embroider rosy cheeks between R14-15 using inc in the last st. Sl st to the first st, and make
peach yarn, 1 st wide. another sl st in the next 3 st. Make a sl st
through the chain gap and the MR. 1sc in the
MR.
R9 Make one more small wing with the same
R10
R11 instructions, but instead of making the last sc,
do a sl st to the first st of the first big wing.
Fasten off, leaving a long tail for sewing. Tighten
the MR.
Attach the wings to the back of the body with
the right/good side facing the body (see
pictures at the last page).

©2022 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 8

Congratulations! Your reversible tulip fairy amigurumi is ready. I hope you enjoyed crocheting her. And if you
like this pattern, do not hesitate to give a review. It will be my pleasure to see your finished toy with the
hashtag #chibiscraftpattern, or add a Ravelry project.
Have a nice day!
With love, Febby Pranajaya

Special thanks to my pattern testers: Rahma @mercy_handmade, Nani @geekoutthreads, and Anggi @gie.dsign

©2022 chibiscraft // Febby Pranajaya - All rights reserved