Tianjin APT Science and Technology Co., Ltd.

Product Specification
03/2019

Product TFT LCD Display

Mode APT TFT500C

Abbreviation 500C

Onlineshop: www.atmparts.eu

1
 Tianjin APT Science and Technology Co., Ltd.

1． Product Name
 TFT LCD display

 Model : APT TFT 500C

2． Suppliers
 Tianjin APT Science and Technology Co., Ltd.

 Email : [email protected] [email protected]

3． Electrical Parameters
 2.2inch IPS screen

 24V/36V/48V battery supply

 Rated operating current : 40mA

 Off leakage current < 1uA

 Max output current to controller : 100mA

 Operating temperature : -20～70℃, Storage temperature : -30～80℃

4． Dimensions & Material

 Product shell is ABS, transparent window is made with high strength Acrylic.

 Dimensions : host/L79mm*W40mm*H18mm

5． Features
 Suitable for low temperature，Max -20℃.

 High-contrast 2.2inch IPS colorful matrix screen.

 Ergonomic external button design, easy to operate.

2
 Tianjin APT Science and Technology Co., Ltd.

 Speed display : AVG SPEED, MAX SPEED, SPEED(Real-time).

 Kilometer / Mile : Can be set according to customers’ habits.

 Smart battery indicator : Provide a reliable battery indicator.

 9-level Assist : 3-level/5-level/9-level optional.

 Mileage indicator : Odometer/Trip distance/ Clock/ Riding time.

 Power indicator : real time power indicator, digital or analog.

 Speed limit value indicator

 Error code indicator.

 Software upgraded : Software can be upgraded through UART.

6． TFT screen instructions

7． Functional Description

UP MODE

POWER

DOWN

3
 Tianjin APT Science and Technology Co., Ltd.

7.1 Power On/Off

Press and hold Power button for 1 second can turn on/off the display. The Display can
automatically shut down when there is no operate & ride for X minutes（X could be
0~9）.

*If the display has been set password power on, you need to input the right password before start.

7.2 Assist level operating

Short press UP/DOWN button can change the assist level. Top assist level is 9, 0 for
neutral. Level quantities can be adjusted according to the customer requirements.

7.3 Speed & Mileage mode switch

Short press POWER button can change the speed and mileage mode, TRIP→TIME
→ODO→AVG SPEED→MAX SPEED.

**If there is no operation for 5 seconds, display will return Speed (Real-Time) display automatically.

7.4 Headlight/backlight On/Off

Press and hold UP button for 1 second can turn on/off the headlight.

*The motor does not work when the battery voltage is low, Display still can keep the headlight on for a
while when E-bike is in riding.

7.5 Walking mode (6km)

Press and hold DOWN button for 2 second can get into walking mode, out of the mode
when release the button.

4
 Tianjin APT Science and Technology Co., Ltd.

* This feature needs to be supported by controller.

7.6 Data cleanup

Press and hold UP & DOWN buttons together for 1 second can reset several temporary
data, temporary data include AVG Speed / MAX Speed / Trip / Time.

* These temporary data can’t be erased by power off.

8． Parameter setting
Press M button (press no less than 2second) can get into setting menus, press UP/DOWN
buttons to change the parameter setting, press M button can switch to next item. Press M
(press no less than 2second) button will exit from menu.

* Display will automatically quit menu when there is no operation for 30 seconds.

* For safety reasons, display can’t get into MENU when riding.

* Display will quit MENU when start riding.

The order of parameters are as follow.

MENU Advanced Setting

System Brightness Wheel Speed Limit
Metric | | || | 27.5 inch 25 km/h
Auto off Battery Speed Poles Start Poles
5 min 36 V 1 1
Battery Ind More Assist
EXIT
Voltage > 5

8.1 System : Press Up / Down button to switch between Metric / Imperial.

8.2 Brightness : Press Up / Down button to change the brightness of the backlight, ‫ ׀‬is
darkness，‫ ׀׀׀׀׀‬is brightness

5
 Tianjin APT Science and Technology Co., Ltd.

8.3 Auto off : Press UP/DOWN button to change the auto power off time, from 1 to 9/OFF,
the number represent time (minutes) to shutdown, OFF means disable auto off function,
default value is 5 minutes.

8.4 Battery : Press UP/DOWN will change battery voltage setting, optional value is
24V/36V/48V.

8.5 Battery Ind : Press UP/DOWN button to change the battery indicator, Voltage /
Percentage / OFF.

*Accurate percentage needs communication with battery.

8.6 Wheel : Press UP/DOWN can change the wheel setting, optional wheel diameter is
12/14/16/18/20/22/24/26/27/27.5/28/29/30/31 inch.

8.7 Advance setting : Press M button can get into the advance setting menu, default
password is ‘1919’.
Advanced Setting
Wheel Speed Limit
27.5 inch 25 km/h

Speed Poles Start Poles

1 1

Assist
EXIT
5

8.8 Speed limit : Press UP/DOWN will change speed limit, range 10km/h~60km/h.
Default value is 25km/h.

Speed Limit Speed Limit Speed Limit

10 km/h 25 km/h 60 km/h

6
 Tianjin APT Science and Technology Co., Ltd.

8.9 Poles in motor : This item is invalid.

Speed Poles
1

8.10 Start after poles : This item is invalid.

Start Poles
1

8.11 Assist levels : This parameter can customize assist levels, options are 3/5/9.

Assist Assist Assist

3 5 9

9． Error Code define

500C can show warning message, icon shows on the screen, and show error code at
the bottom of the screen, error code is from 04H~30H, definition see the table below.

Error Code Error description Error display

0x01 Normal No error
0x03 Brake signal No error
0x04 Throttle on high position Display 04H on LOGO position
0x05 Throttle error Display 05H on LOGO position
0x06 Low voltage protection Display 06H on LOGO position
0x07 High voltage protection Display 07H on LOGO position
0x08 Motor’s hall sensor error Display 08H on LOGO position
0x09 Phase line of motor error Display 09H on LOGO position
0x10 Controller over temperature Display 10H on LOGO position
0x11 Motor over temperature Display 11H on LOGO position
0x12 Current sensor error Display 12H on LOGO position
0x13 Battery’s temperature sensor Display 13H on LOGO position
0x14 Motor’s temperature sensor error Display 14H on LOGO position
0x15 Controller’s temperature sensor error Display 15H on LOGO position
0x21 Speed sensor error Display 21H on LOGO position
0x22 BMS communication error Display 22H on LOGO position
0x23 Head light error Display 23H on LOGO position
0x24 Head light sensor error Display 24H on LOGO position
0x25 Torque sensor error-Torque Display 25H on LOGO position
0x26 Torque sensor error-speed Display 26H on LOGO position
0x30 Communication error Display 30H on LOGO position

7
 Tianjin APT Science and Technology Co., Ltd.

10． Assembly instructions

M4*10

Please pay attention to the screw’s torque value, damaged caused by excessive torque
is not within the scope of the warranty.

11． Connector descriptions

8
 Tianjin APT Science and Technology Co., Ltd.

1、 Red wire : Anode(24v/36v/48V)

2、 Blue wire : Power cord to the controller
3、 Black wire : GND
4、 Green wire : RxD (controller -> display)
5、 Yellow wire : TxD (display -> controller)

12． Assist level instructions

Assist level can be customized, the highest level is 9, common used assist level see the
table below:
3 level 5 level 9 level
0 0 0 No power assist
1 1
2
1 2 3
4
3 5
2 6
4 7
8
3 5 9

13． Certification
CE / IP65 (water proof) / ROHS.