1) This certificate approves the cable gland manufactured by WISKA Hoppmann GmbH for use on DNV GL classed vessels.
2) The cable gland is approved for use in open decks and hazardous areas, is made of polyamide, and has an operating temperature range of -40°C to +75°C or -60°C to +75°C.
3) The certificate is valid until 2024-07-02 and the cable gland must be marked with the manufacturer, type designation, and explosion protection rating.
1) This certificate approves the cable gland manufactured by WISKA Hoppmann GmbH for use on DNV GL classed vessels.
2) The cable gland is approved for use in open decks and hazardous areas, is made of polyamide, and has an operating temperature range of -40°C to +75°C or -60°C to +75°C.
3) The certificate is valid until 2024-07-02 and the cable gland must be marked with the manufacturer, type designation, and explosion protection rating.
1) This certificate approves the cable gland manufactured by WISKA Hoppmann GmbH for use on DNV GL classed vessels.
2) The cable gland is approved for use in open decks and hazardous areas, is made of polyamide, and has an operating temperature range of -40°C to +75°C or -60°C to +75°C.
3) The certificate is valid until 2024-07-02 and the cable gland must be marked with the manufacturer, type designation, and explosion protection rating.
1) This certificate approves the cable gland manufactured by WISKA Hoppmann GmbH for use on DNV GL classed vessels.
2) The cable gland is approved for use in open decks and hazardous areas, is made of polyamide, and has an operating temperature range of -40°C to +75°C or -60°C to +75°C.
3) The certificate is valid until 2024-07-02 and the cable gland must be marked with the manufacturer, type designation, and explosion protection rating.
Issued to WISKA Hoppmann GmbH Kaltenkirchen, Germany
is found to comply with
DNV GL rules for classification – Ships, offshore units, and high speed and light craft
Application : Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL.
Material Polyamide Suitable for open deck Yes Suitable for Hazardous areas Yes
Issued at Hamburg on 2019-07-03
for DNV GL This Certificate is valid until 2024-07-02. Digitally Signed By: Hartmann, Thomas
DNV GL local station: Hamburg Location: DNV GL SE Hamburg, Germany
Signing Date: 04.07.2019 , on behalf of
Approval Engineer: Uwe Supke Arne Schaarmann
Head of Section
This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 1 of 2
Product description Explosion protected non-metallic cable glands: Type designation: *SKE/1(S)(-L)-*(-RDE) ** (LT) (MFD**/***(-**/***)) Connection thread: M12, 16, 20, 25, 32, 40, 50, 63 Material: Polyamide Temperature range:Normal type -40°C to +75°C LT type -60°C to +75°C Ingress protection: IP 68 (5bar, 30min) Ex classification: II 2 G Ex eb IIC Gb II 2 D Ex tb IIIC Db
Application/Limitation Manufacturer's installation description, instructions and DNV GL rules to be followed. Not to be used in bulkheads/decks or for penetrating boundaries of tanks. Suitable for open deck The information related to Ex certification from recognized test institution is given as information only. Applications where Ex certified equipment is required will in general be subject to approval case by case based on documentation as required in DNV GL rules.
Type Approval documentation
EC-Type Examination Certificate No. PTB 13 ATEX 1015 X dated 02 May 2018, with Test Report PTB Ex 18-17089. IECEx Certificate of Conformity IECEx PTB 13.0034X, with IECEx Test Report DE/PTB/ExTR13.0049/03.
Tests carried out
Type tests in accordance with: EN 60079-0:2012+A11:2013; EN 60079-7:2015; EN 60079-31:2014
Marking of product The products to be marked with: Manufacturer Type designation Ex rating
Periodical assessment The scope of the periodical assessment is to verify that the conditions stipulated for the Type approval are complied with and that no alterations are made to the product design or choice of materials. The main elements of the assessment are: Inspection on factory samples, selected at random from the production line (where practicable) Results from Routine Tests (RT) checked (if not available tests according to RT to be carried out) Review of type approval documentation Review of possible change in design, materials and performance Ensuring traceability between manufacturer’s product type marking and Type Approval Certificate. Periodical assessment is to be performed after 2 years and after 3.5 years. A renewal assessment will be performed at renewal of the certificate.
END OF CERTIFICATE
Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 2 of 2
