We reserve all rights in this document and in the information contained therein.

Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Minerals Library
Release Notes

800xA – AC800M Connect – Minerals Library

Version 5.1/5b

Based on Project Minerals Library, CoE Minerals & Cement

Prep. ATBPA / L. Kraehenbuehl 10.07.2009
Appr. ATBPA / M. Knabenhans 10.07.2009
Doc. kind Release Notes Doc. Item

Title Minerals Library Release Notes des. des.

800xA Minerals Library version 5.1/5b Resp. dept. CHIND / ATBPA

Doc. no. Lang. Rev. ind. Page 1
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

CONTENT
1. Library Versions..................................................................................................... 10
2. List of Changes for BMI Library SV4.1 ................................................................. 17
3. List of Changes for BMI Library 5.0/1 ................................................................... 19
3.1 General Changes ........................................................................................... 19
3.2 Basic IO and Loop Objects ............................................................................ 24
3.3 Consumer Objects ......................................................................................... 28
3.4 Group Objects................................................................................................ 30
4. List of Changes for Minerals Library 5.0/2 ........................................................... 33
4.1 BMI Defaults Configuration moved to new Location ....................................... 33
4.2 Maintenance Submode .................................................................................. 33
4.3 Group Uploader / PCC Uploader / PCC Viewer ............................................. 33
4.4 Consumer Extension...................................................................................... 35
4.5 Additional Links in Faceplate (“Extended Info”) .............................................. 36
4.6 Time of last Reset is shown for all Counters .................................................. 37
4.7 Deviation Alarm for MOTP and MOT1_VVVF ................................................ 37
4.8 New ReportingCounter Object ....................................................................... 37
4.9 AlarmFdBckOpn / IO.Out.Run Behaviour changed ........................................ 38
4.10 FB1 / FB2 Feedback Open Alarm .................................................................. 38
4.11 AlarmFdBckSubTxt / AlarmFBxSubTxt .......................................................... 38
4.12 IA Indication for Drives in Auto Mode ............................................................. 39
4.13 Group Single Stepping ................................................................................... 39
4.14 Start Speed Setpoint configuration for MOT1_VVVF...................................... 41
4.15 AIS Signal Error Delay ................................................................................... 42
4.16 Link to DTM from AIS Faceplate .................................................................... 43
4.17 New LCB Types for Jog control (combined on/off) ......................................... 43
4.18 Name (Tagname) increased from 20 to 24 characters ................................... 43
4.19 Bug correction summary ................................................................................ 43
5. List of Changes for 5.1/0 ....................................................................................... 44
5.1 Support for PG2 graphics............................................................................... 44
5.2 New Installer / System Extension ................................................................... 44
5.3 Licensing ....................................................................................................... 44
5.4 Released Libraries / Release Handling .......................................................... 44
5.5 New Direct Entry Window Step and Limits configuration ................................ 44
5.6 New General Properties ................................................................................. 44
5.7 New handling for BMI Workplace Properties .................................................. 45
5.8 Operator Note Indication ................................................................................ 45
5.9 Pre-selection Password and Shift + Click ....................................................... 45
5.10 Show Tag ...................................................................................................... 45
5.11 Individual configuration of value and unit size ................................................ 45
5.12 Transparent Color Support for Process Graphics ........................................... 45
5.13 Direct Entry for Group .................................................................................... 45
5.14 Discontinued / Renamed Process Symbols and Graphic Elements................ 45
5.15 Discontinued graphic element appearance options ........................................ 47
6. List of Changes for 5.1/1 ....................................................................................... 48
6.1 New Features and Functions ......................................................................... 48
6.1.1 PG2 Graphic Elements for BMI Energy Library ................................. 48
6.1.2 New Process Symbols ...................................................................... 48
6.1.3 New Direct Entry Window .................................................................. 48
6.1.4 Separate and open extension libraries for VB6 Faceplates ............... 48
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 2
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

6.1.5 Changed property default value ........................................................ 48

6.1.6 Additional DOS / DOC Button functions............................................. 49
6.1.7 Extended DOS and DOC logical color options................................... 49
6.1.8 Extended Drive graphic elements logical colors ................................ 49
6.1.9 Improved PreBin button..................................................................... 49
6.1.10 Improved increase/decrease button for AOS, AOC and PID.............. 49
6.1.11 Better presentation of graphic elements in design mode ................... 50
6.1.12 MOTP – Control Function .................................................................. 50
6.1.13 PIDCtrl – Control Function................................................................. 50
6.1.14 Group Status Viewer ......................................................................... 50
6.2 Corrected Errors ............................................................................................ 50
6.2.1 PG2 GraphiXs error correction summary........................................... 50
6.2.2 Control Module error correction summary ......................................... 51
6.2.3 VB6 Graphics error correction summary............................................ 52
6.3 Discontinued and changed Features and Functions....................................... 52
6.3.1 2nd CB within the Circuit Breaker Control Module .............................. 52
6.3.2 Indication Type Handling of Circuit Breaker....................................... 52
6.3.3 Library Versioning ............................................................................. 53
7. List of Changes for 5.1/2 ....................................................................................... 54
7.1 New Features and Functions ......................................................................... 54
7.1.1 PCC Interlocks (Process Control Connection) ................................... 54
7.1.2 Minerals GraphiXs PG2 Faceplates .................................................. 54
7.1.3 Minerals GraphiXs PG2 NLS Support for NLS Texts defined in
the AC800M ...................................................................................... 54
7.1.4 Prebin Button: New Property “EnableColorBar” ................................. 54
7.1.5 AIC, AIS, DIC, DIS, PID – Control Function....................................... 54
7.1.6 AIC, AIS, DIC, DIS, PID, MOTx, VLVx – Control Function ................. 54
7.1.7 AIC, AIS, PID – Control Function....................................................... 54
7.1.8 AIS – Control Function ...................................................................... 54
7.1.9 AOC, DOC – Control Function .......................................................... 55
7.1.10 Log Configuration Extension Libraries ............................................... 55
7.2 Corrected Errors ............................................................................................ 55
7.2.1 Control Module error correction summary ......................................... 55
7.2.2 PG2 GraphiXs error correction summary........................................... 55
7.2.3 PG2 GraphiXs Default Value Changes.............................................. 55
7.2.4 WebView Uploader config correction................................................. 56
7.2.5 Changed General Properties Defaults: .............................................. 56
8. List of Changes for 5.1/2a ..................................................................................... 57
8.1 New Features and Functions ......................................................................... 57
8.1.1 New Open Extension Libraries for VB Graphic Element and
Faceplate Elements........................................................................... 57
8.1.2 New Open Extension Libraries for Property Override Aspects........... 57
8.1.3 New 2 and 4 screen workplace templates for PG2 ............................ 57
8.1.4 ActiveX ConsumerExt.ocx – Property HTMLOnObject ...................... 57
8.2 Corrected Errors ............................................................................................ 57
8.2.1 DOC Value Reset during Control Builder Download .......................... 57
8.2.2 New VB Date and time user control for VB workplaces ..................... 57
9. List of Changes for 5.1/3 ....................................................................................... 58
9.1 New Features and Functions ......................................................................... 58
9.1.1 BMI GraphiXs .................................................................................... 58
9.1.2 Parameterized PreSelections ............................................................ 58
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 3
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9.1.3 Duty Stand-by Switch Over ............................................................... 58

9.1.4 Additional Value Treatment ............................................................... 58
9.1.5 MOTx, VLVx, GrpCycleCtrl and CircuitBreaker – Control
Function ............................................................................................ 58
9.1.6 MOTx, VLVx – Control Function ........................................................ 59
9.1.7 MOTP – Control Function .................................................................. 59
9.1.8 PCC_ThresholdAND3 – Control Function ......................................... 59
9.1.9 MNSiS MOTx – Control Function ...................................................... 59
9.1.10 VVVFSerial – Control Function.......................................................... 59
9.1.11 MNSiS MOTP – Control Function ...................................................... 59
9.1.12 ReportingCount – Control Function ................................................... 59
9.1.13 FPL - Trend tab added ...................................................................... 59
9.1.14 Additional properties for Graphic Element PG2 ................................. 61
9.1.15 IndTr extension ................................................................................. 62
9.1.16 DigitalCmdButtonCore....................................................................... 62
9.2 Corrected Errors ............................................................................................ 63
9.2.1 Control Module error correction summary ......................................... 63
9.2.2 Faceplate correction Summary .......................................................... 64
9.2.3 Graphic Element and Minerals GraphiXs core correction
Summary........................................................................................... 65
9.2.4 Security ............................................................................................. 65
9.3 PCC Viewer ................................................................................................... 66
9.4 Group Status Viewer ...................................................................................... 66
10. List of Changes for 5.1/3a ..................................................................................... 67
10.1 New Features and Functions ......................................................................... 67
10.1.1 Group – Control Function .................................................................. 67
10.1.2 AIC, AIS, DIC, DIS – Control Function............................................... 67
10.1.3 VVVFSerial – Control Function.......................................................... 67
10.1.4 PCC Status ....................................................................................... 67
10.1.5 PCC_Theshold_AND3 Faceplate ...................................................... 67
10.1.6 PCC Viewer ...................................................................................... 67
10.1.7 PCC/Group Uploader ........................................................................ 67
10.1.8 Group/GrpCycleCtrl Status Viewer .................................................... 67
10.1.9 Custom BMI Common Properties ...................................................... 68
10.1.10 PID Tune and TuneRes..................................................................... 68
10.1.11 MOTP Setpoint input enable in case of TrackMan = false ................. 68
10.1.12 BMIEnergy MOT1REF542Plus ComError indication.......................... 68
10.1.13 GROUP Object General Properties BMI Group ................................. 68
10.1.14 MOTx, VLVx Object ConsumerExt1 .................................................. 68
10.1.15 CircuitBreaker Object ConsumerExt1 ................................................ 68
10.2 Corrected Errors ............................................................................................ 69
10.2.1 Control Module error correction summary ......................................... 69
10.2.2 PCC Viewer ...................................................................................... 70
10.2.3 Group Status Viewer ......................................................................... 70
10.2.4 Preselection Button ........................................................................... 70
10.2.5 Faceplate Button configuration .......................................................... 70
10.2.6 Number of Digits ............................................................................... 70
10.2.7 MOTP M3 not visible in Summary (BaseControl FacePlate).............. 70
10.2.8 SV5.1 Trend Indication missing in case of no Log Configuration
created 71
11. List of Changes for 5.1/3b ..................................................................................... 72
11.1 New Features and Functions ......................................................................... 72
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 4
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.1 CmdButton, Button Background color ............................................... 72

11.1.2 DigitalCmdButtonCore, Button Background color .............................. 74
11.1.3 DigitalCmdButtonCore, Button Background color .............................. 75
11.1.4 SwitchCore, new Generic Element .................................................... 76
11.1.5 DriveCmdButtonCore, new Generic Element..................................... 77
11.1.6 MOTPButton, new Generic Element.................................................. 77
11.1.7 GroupCmnd, new Generic Element ................................................... 77
11.1.8 General Property, EnableAbnormalModeInd ..................................... 78
11.1.9 ModeInd, Default Mode ..................................................................... 78
11.1.10 DriveCore, Default Mode ................................................................... 78
11.1.11 MOT1, Default Mode ......................................................................... 79
11.1.12 MOT2, Default Mode ......................................................................... 79
11.1.13 MOT1_VVVF, Default Mode .............................................................. 80
11.1.14 MOTP, Default Mode......................................................................... 81
11.1.15 VLV1, Default Mode .......................................................................... 82
11.1.16 VLVNO1, Default Mode ..................................................................... 82
11.2 Corrected Errors ............................................................................................ 83
11.2.1 DISTxt, DICTxt, Input Property Dynamicity = Dynamic ...................... 83
11.2.2 DOSTxt, DOCTxt, Input Property Dynamicity = Dynamic .................. 83
11.2.3 DOSButton, DOCButton, Input Property Dynamicity = Dynamic ........ 83
11.2.4 DigitalCmdButtonCore, Property Height and Width = 0. .................... 84
11.2.5 EnableDirectEntry && IsInputEnabled() ............................................. 84
11.2.6 Button, Enable && !StatusQualityBad................................................ 85
11.2.7 AspectLinkCore, EnableColorBar ...................................................... 86
11.2.8 FacePlate extended Info e_ViewReference02................................... 86
11.2.9 DOSButton, DOCButton TextNLS ..................................................... 86
12. List of Changes for 5.1/4 ....................................................................................... 87
12.1 New Features and Functions ......................................................................... 87
12.1.1 CBM Diagrams .................................................................................. 87
12.1.2 Additional PCC Interlock Direction configuration possibilities ............ 87
12.1.3 New MOT2_VVVF Control Module .................................................... 88
12.1.4 New DriveGroup Control Module ....................................................... 88
12.1.5 New PCC and GCC_Com Control Modules ...................................... 88
12.1.6 Speed Supervision for MOT1_VVVF and MOT2_VVVF .................... 88
12.1.7 New Mode 5 “Smart Reset” for PulseCount / ReportingCount ........... 89
12.1.8 New Workplace with Tab-Navigation ................................................. 89
12.1.9 Search Tool....................................................................................... 89
12.1.10 Write Properties for the Faceplate ..................................................... 89
12.1.11 BMI Default configuration .................................................................. 89
12.1.12 Operator Note ................................................................................... 89
12.1.13 VLV1 and VLVNO1 new FBErrorModes ............................................ 90
12.1.14 REF542PlusCircuitBreaker................................................................ 90
12.1.15 New Control Module GroupStep ........................................................ 90
12.1.16 New Control Module PCC_Intlk ......................................................... 91
12.1.17 New SPIntPar Parameter for MOTx_VVVF, DriveGroup ................... 91
12.1.18 New AutoMode Parameter for Consumers
(MOT1/2,_VVVF,VLVx) ..................................................................... 91
12.1.19 Alarm Lists use Event Time instead of Active Time ........................... 91
12.1.20 New Tab-based BMI Workplace ........................................................ 91
12.2 Corrected Errors ............................................................................................ 91
12.2.1 GroupStep (and StepOneGroup / StepTwoGroup) ............................ 91
12.2.2 Consumer Objects ............................................................................ 92
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 5
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

12.2.3 Alarm Color over PCC not correctly transferred for SigErr ................. 92
12.2.4 VLV1 and VLVNO1 ........................................................................... 92
12.2.5 MOT1_VVVF Inc/Dec if EnableFBFieldMode = false......................... 92
12.2.6 GROUP 92
12.2.7 „Block“ indication forwarding over PCC ............................................. 92
12.2.8 Group Status Viewer ......................................................................... 92
12.2.9 ConsumerExt01 ................................................................................ 92
12.2.10 Energy CB Aspect ............................................................................. 92
12.2.11 Minerals License Service for 64Bit Windows ..................................... 93
12.2.12 PCCUploader / GroupUploader ......................................................... 93
12.3 Discontinued Functions .................................................................................. 93
12.3.1 StepOneGroup / StepTwoGroup ....................................................... 93
13. List of Changes for 5.1/4a ..................................................................................... 93
13.1 New Features ................................................................................................ 93
13.1.1 IO Status Indication Color for Consumer Objects and DIS................. 93
13.1.2 New EnExtAlarm Parameter for AIC.................................................. 94
13.1.3 Consumer Object keeps in Auto Mode during Interlock or Trip .......... 94
13.1.4 CircuitBreaker Graphic ANSI Mode and Intermediate/Fault
Position 94
13.1.5 new IO.Out.FdBckOffErr Output for MOTx ........................................ 94
13.1.6 Jog LcbTypes for DriveGroup............................................................ 94
13.1.7 Events for Consumer Objects now on IO.Out.Run change ................ 94
13.1.8 New DriveGroup AuxStopCtrl and InterlockCtrl Options .................... 94
13.1.9 Behaviour of DriveGroup with no Members ....................................... 95
13.1.10 ProcessPanel support for DriveGroup ............................................... 95
13.2 Corrected Errors ............................................................................................ 95
13.2.1 GraphiXs Aspect Link ........................................................................ 95
13.2.2 Group Start Delay for consecutive Steps ........................................... 95
13.2.3 Extended Info Links on PG2 Faceplates with NLS ............................ 95
13.2.4 AIS/DIS Faceplate PCC Local Start Override .................................... 95
13.2.5 Small Corrections .............................................................................. 95
13.2.6 MOT1VVVFCtrl VB Graphic Element ................................................ 96
13.3 Discontinued Functions .................................................................................. 96
14. List of Changes for 5.1/5 ....................................................................................... 97
14.1 Licensing ....................................................................................................... 97
14.2 Yard and Port Objects .................................................................................... 97
14.3 PCC Interlocks supported for GROUP ........................................................... 97
14.4 New SubGroup Control Module ..................................................................... 97
14.5 New GroupConnect Blocks ............................................................................ 97
14.6 New RecipeControl Control Module ............................................................... 97
14.7 New PCC_Connect_6 Block .......................................................................... 97
14.8 New BMI Standards Configuration via Resource Backup Tool ....................... 97
14.9 New Support Control Modules ....................................................................... 98
14.10 Improved Group Bus RFS and Step Feedback .............................................. 98
14.11 New Status_Override Parameters on PCC_Intlk ............................................ 98
14.12 New LCB Type 12 .......................................................................................... 98
14.13 Changed SigErr behavior for AIS/AIC and DIS .............................................. 99
14.14 Small Corrections & Additions ........................................................................ 99
14.14.1 Start Inhibit Indication on DIS and AIS .............................................. 99
14.14.2 RemainTimeForStep forwarding on DriveGroup ................................ 99
14.14.3 Trend Aspects on AIC/AIS................................................................. 99
14.14.4 New cBMI.AIC.PropagateSigErrToPCC ............................................ 99
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 6
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

14.14.5 AIS StatusTr, New StatusTr Parameter on AIC ................................. 99

14.14.6 PCC Interlock on DIS/DIC with ValTr = -1 and WarnValTr = -1 ......... 99
14.14.7 Disable FastInterlock on DIS with IO.AlarmEn................................. 100
14.14.8 SeqPosX / Y on MOTP in AutoMode ............................................... 100
14.14.9 ProcessPanel .................................................................................. 100
14.14.10 Extended Info Area SearchPath Configuration................. 100
14.14.11 PCCIntlk .......................................................................... 100
14.14.12 Simulation Value for AIS/AIC now considers the Limit
Values 100
14.14.13 New Actuator and DISDelayTxt Graphic Elements .......... 100
14.14.14 BMI_FaceplateTextCore .................................................. 101
14.14.15 BMI_ValueInputCore ....................................................... 101
14.14.16 Number of Digits in BaseControl for AIC / AIS / AOC /
AOS 101
15. List of Changes for 5.1/5a ................................................................................... 102
15.1 New Minerals Library Viewers ...................................................................... 102
15.2 Subgroup IO.Out.Rfs not including StartInterlock 1..4 .................................. 102
15.3 Small Corrections......................................................................................... 102
15.3.1 PCC_Threshold: Fallback to Tagname for empty Descriptions........ 102
15.3.2 Engineering Units shown in Event Text ........................................... 102
15.3.3 Auto Mode switches IA IndTr........................................................... 102
15.3.4 Direct Group Timeout through GroupConnnect ............................... 102
15.3.5 GCC_Com_M and PCC_Com_Drive as Aspect Objects ................. 102
15.3.6 DISTxt visible in case Blocked / MouseOver ................................... 102
15.3.7 DriveGroup GrpStopDelay ignored if MainDrvOff ............................ 103
15.3.8 STW restart on Group start with StwFirst = true .............................. 103
15.3.9 Extended DEW ................................................................................ 103
15.4 Discontinued Functions ................................................................................ 103
16. List of Changes for 5.1/5b ................................................................................... 103
16.1 New LCC and BMIAdvancedAnalog Library ................................................. 103
16.2 Small Changes & Corrections ...................................................................... 104
16.2.1 SystemDefault (Applied) Action for AIS Limits Enable Checkbox .... 104
16.2.2 Active Alarms visible in Alarm Control ............................................. 104
16.2.3 AISBar / AOSBar Limit color as Logical Color ................................. 104
16.2.4 Extended DEW for RecipeCtrl ......................................................... 104
16.2.5 Stop Step for MOT2 in GroupStepViewer ........................................ 104
16.2.6 Updated Parameters for ACS8x0 Wrappers .................................... 104
16.2.7 MOTP IO.Out.WSP follows E1Ref in Manual Mode if EnAuto =
false 104
16.2.8 MOTP IO.Out.NoIntX / NoIntY now includes the Group
Sequence Interlock ......................................................................... 104
16.2.9 PCC_Intlk new EnExtIntlkDelay Parameter ..................................... 105
16.2.10 Keep in Quickstop from Group on Member DriveGroup /
Subgroup 105
17. Installation of Minerals Library 5.1/5b ................................................................ 106
17.1 Node Types ................................................................................................. 106
17.2 Pre-Upgrade Procedure ............................................................................... 106
17.3 Installation Procedure for Upgrades from Versions 5.1/2 and older .............. 108
17.4 For New Installations and Upgrades from Version 5.1/2a and newer ........... 108
17.6 Post-Upgrade Procedure ............................................................................. 110
18. BMI Library 5.0/1 Upgrade Hints ......................................................................... 111
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 7
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

18.1 Log Configuration Upgrade .......................................................................... 112

18.2 Rollup Upgrades .......................................................................................... 115
19. BMI Library 5.0/2 Upgrade Hints ......................................................................... 117
19.1 Group Uploader / PCC Uploader.................................................................. 117
19.2 Alarm & Event List Viewclass ....................................................................... 118
19.3 Connected Constants to LcbRem ................................................................ 118
19.4 Changed Property Attributes for Forcing of Values in Signal Control
Modules ....................................................................................................... 118
19.5 PCC Bus changes........................................................................................ 118
19.6 IO.Out.Run definition changed, Run Indication on Graphics changed from
IO.Out.Run to StatusRun Variable ............................................................... 119
19.7 Additional EnExtLimits Parameters on PIDCtrl ............................................. 119
19.8 New NLS Texts ............................................................................................ 119
19.9 Compiler Switches for CBM 5.0/2 ................................................................ 119
20. BMI Library 5.1/0 Upgrade Hints ......................................................................... 119
20.1 Graphics Migration ....................................................................................... 119
20.1.1 Deploy of Process Displays ............................................................. 120
20.1.2 Aspects of Type “BMI Base Display” or “BMI Overlap Display”
are not migrated .............................................................................. 120
20.1.3 Graphic Elements of wrong Aspect Type are not migrated .............. 120
20.1.4 Logical Colors connected to static Elements are not migrated......... 120
20.1.5 Migration Error “Guid should contain 32 digits…” on AspectLink
Control 120
20.1.6 Properties of data type string containing special characters are
not migrated .................................................................................... 120
21. BMI Library 5.1/1 Upgrade Hints ......................................................................... 121
21.1 800xA version requirements for BMI GraphiXs Extension 5.1/1 ................... 121
21.2 800xA Graphics Extension issues ................................................................ 121
21.2.1 Blinking colors in PG2 aspects can freeze....................................... 121
22. BMI Library 5.1/3 Upgrade Hints ......................................................................... 122
22.1 Changes in the Alarms handling may cause reactivation of time delayed
alarms 122
22.2 PreBinTask .................................................................................................. 122
22.3 LCB Types ................................................................................................... 122
22.4 MNSiS MOTP .............................................................................................. 122
22.5 PG2 incompatibilities of Data type changed from Real to Float .................... 123
22.6 General default for colored line on top of pre-selection button has
changed to disabled ..................................................................................... 124
23. BMI Library 5.1/3a Upgrade Hints ....................................................................... 125
23.1 PG2 incompatibilities of Data type changed from Real to Float .................... 125
23.2 PID Tune and TuneRes ............................................................................... 126
24. Minerals Library 5.1/4 Upgrade Hints ................................................................. 127
24.1 BMI_WeighfeederLib and BMIUserDefined .................................................. 127
24.2 StartInhibit uses Started instead of Run from Parent.................................... 127
24.3 New Colors in “BMI NG Symbol 2 Colors” .................................................... 127
24.4 PCC_Connect DrivePCC Ports have changed from Type In_Out to Out ...... 127
24.5 SPIntPar as Parameter ................................................................................ 127
24.6 Remove VB Faceplates and Graphic Elements (after Migration to PG2) ...... 127
24.7 Remove Obsolete Aspects from Minerals Library......................................... 128

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 8
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

25. Minerals Library 5.1/4a Upgrade Hints ............................................................... 129

25.1 Communication Error in GCC_Com_M because of changed
GCC_ComData ............................................................................................ 129
26. Minerals Library 5.1/5 Upgrade Hints ................................................................. 129
26.1 PCC Interlock to Groups now active............................................................. 129
26.2 Replacement of BMILib_Weighfeeder with RecipeControlBase ................... 129
26.3 Blocking on AIS, AIC and DIS with Active Signal Error ................................ 129
26.4 DIS/DIC with ValTr = -1 and WarnValTr = -1 ................................................ 129
26.5 PCC_Intlk Control Module Behaviour Changes............................................ 130
26.6 PCC Direction FB Interlock .......................................................................... 130
26.7 PCC_Intlk StartedState Parameter replaced by Status_StartedX and
Status_StartedY........................................................................................... 130
26.8 DriveGroup IO.In.EnSeqStartY initial Value false ......................................... 130
26.9 Process Panel for DriveGroup...................................................................... 130
26.10 New Extension for Log Configurations on BMI_ACS8x0 and
BMI_UMC100 Libraries ................................................................................ 130
26.11 “DataTreeView” Aspect on VVVFSerial in BMIUserDefined ......................... 131
27. Minerals Library 5.1/5a Upgrade Hints ............................................................... 131
27.1 Upload the Functional Structure ................................................................... 131
27.2 Change in GCC_ComData Type .................................................................. 132
27.3 Configure PCC Viewer for Group without Interlocks ..................................... 132
27.4 Upgrade Configuration from old ConsumerExt01 to new Extended Info
Viewer 132
27.5 Uncheck “Check for publisher’s certificate revocation” Option (800xA SV
5.1 only) ....................................................................................................... 132
28. Minerals Library 5.1/5b Upgrade Hints ............................................................... 133
28.1 New OUTCC Port in PIDCtrl ........................................................................ 133
28.2 PIDCtrl Balancing Time on Signal Error changed ......................................... 133
29. Upgrading NLS Resources from VB6 to support PG2 Graphics ...................... 134
30. Problems and known Bugs ................................................................................. 135
30.1 ABB_REF542Plus: Aspect CBValueAndUnit ............................................... 135
30.2 LateBoundViewRef problem with AspectLinkCore ....................................... 135
30.3 GCC_Com does not support GrpCycleCtrl ................................................... 135
30.4 Loops with PCC_Connect and/or PCC_Treshold in Single Control
Modules ....................................................................................................... 135
30.5 Multiple Connections between Signals and Cosumers via PCC_Connect .... 135
30.6 PCC Alarm / Interlock Limitations in the current Release ............................. 135
30.7 Code Sorting ................................................................................................ 136
30.8 Blocked Value in case of Signal Error with ErrCtrl = true on AIS .................. 136

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 9
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

1. Library Versions
The following table shows the relation between the individual Library Versions and the
Minerals Library Version, Revision and Patches.
Minerals Library Version Library Version Required 800xA System
Versions
Minerals Library 4.1 No library version handling, all libraries 800xA SV 4.1 Rollup 3c
1.0/0 (and all newer Rollup’s)
Minerals Library 5.0/1 for SV 4.1 No library version handling, all libraries 800xA SV 4.1 Rollup 3c
1.0/0 (and newer Rollup’s)
Minerals Library 5.0/1 for SV 5.0 No library version handling, all libraries 800xA SV 5.0 SP1 or SP2
1.0/0 (and all Rollups)
Minerals Library 5.0/2 No library version handling, all libraries 800xA SV 5.0 SP1 or SP2
1.0/0 (and all Rollups)
Minerals Library 5.1/0 Beta1 All libraries 1.5/1 800xA SV 5.0 SP2 Rev B
Minerals Library 5.1/0 Beta2 All libraries 1.5/2 800xA SV 5.0 SP2 Rev B
Minerals Library 5.1/0 (release) All libraries and extension libraries 800xA SV 5.0 SP2 Rev B
1.5/10 (and all Rollups)
Minerals Library 5.1/1 (release) Main Library 800xA SV 5.0 SP2 Rev C
BMIConstAndVar 1.5-11 (and all Rollups)
BMIAdaptions 1.5-11
BMISupport 1.5-10
BMIStandard 1.5-11
Ext_GraphiXs 1.5-11
Ext_Obsolete 1.5-11
Ext_VB_FPL 1.5-11
Ext_PG2_FPL 1.5-11

BMI_GraphiXs 1.5-11
BMI_GraphiXs_Custom 1.5-11
CustomizationExt 1.5-11

BMIEnergy 1.5-12
Ext_GraphiXs 1.5-11
Ext_OpenAspects 1.5-11
BMILib_WeightFeeder 1.5-11
Ext_GraphiXs 1.5-10

Electrical Device Integration

Templates

BMIUserDefConstAndVar 1.5-11
BMISerialInterfaces 1.5-10
BMIUserDefined 1.5-11
BMI_MNSIS 1.5-10
BMI_MNSiS_MBTCP 1.5-15
BMI_UMC22 1.5-10
BMI_UMC22wExtStatus 1.5-10
Minerals Library 5.1/2 (release) Main Library 800xA SV 5.0 SP2 Rev C
BMIConstAndVar 1.5-13 in addition temporary
BMIAdaptions 1.5-12 correction for PG2 (SV50

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 10
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Minerals Library Version Library Version Required 800xA System

Versions
BMISupport 1.5-10 GraphicsExtension 5p0p2d0
BMIStandard 1.5-14 RU2d TC3) is required
Ext_GraphiXs 1.5-13
Ext_Obsolete 1.5-11
Ext_VB_FPL 1.5-12
Ext_PG2_FPL 1.5-12
Ext_XXLog 1.5-11

BMI_GraphiXs 1.5-12
BMI_GraphiXs_Custom 1.5-12
CustomizationExt 1.5-12

BMIEnergy 1.5-14
Ext_GraphiXs 1.5-12
Ext_Obsolete 1.5-12
Ext_OpenAspects 1.5-12
Ext_PG2_FPL 1.5-14
Ext_VB_FPL 1.5-14
BMILib_WeightFeeder 1.5-11
Ext_GraphiXs 1.5-10

Electrical Device Integration

Templates

BMIUserDefConstAndVar 1.5-10
BMISerialInterfaces 1.5-10
BMIUserDefined 1.5-11
BMI_MNSIS 1.5-12
BMI_MNSiS_MBTCP 1.5-16
BMI_UMC22 1.5-12
BMI_UMC22wExtStatus 1.5-13
Minerals Library 5.1/2a (release) Main Library 800xA SV 5.0 SP2 Rev C
BMIConstAndVar 1.5-14 in addition temporary
BMIAdaptions 1.5-12 correction for PG2 (SV50
BMISupport 1.5-10 GraphicsExtension 5p0p2d0
BMIStandard 1.5-16 RU2d TC3) is required
Ext_Obsolete 1.5-12
Ext_VB 1.5-10
Ext_VB_FPL 1.5-12
Ext_XXLog 1.5-11
Ext_OpenAspects 1.5-10
Ext_GraphiXs 1.5-13
Ext_PG2_FPL 1.5-12

BMI_GraphiXs 1.5-12
BMI_GraphiXs_Custom 1.5-12
CustomizationExt 1.5-12

BMIEnergy 1.5-16
Ext_OpenAspects 1.5-13
Ext_Obsolete 1.5-12
Ext_VB 1.5-10
Ext_GraphiXs 1.5-12
Ext_VB_FPL 1.5-14

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 11
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Minerals Library Version Library Version Required 800xA System

Versions
Ext_PG2_FPL 1.5-14
BMILib_WeightFeeder 1.5-11
Ext_VB 1.5-10
Ext_GraphiXs 1.5-11

Electrical Device Integration

Templates

BMIUserDefConstAndVar 1.5-10
BMISerialInterfaces 1.5-10
BMIUserDefined 1.5-12
Ext_OpenAspects 1.5-10
BMI_MNSIS 1.5-12
BMI_MNSiS_MBTCP 1.5-16
BMI_UMC22 1.5-12
BMI_UMC22wExtStatus 1.5-13
Minerals Library 5.1/3 (release) Main Library Supported System Versions:
BMIConstAndVar 1.5-15 800xA SV 5.0 SP2 Rev C
BMIAdaptions 1.5-13 in addition temporary
BMISupport 1.5-11 correction for PG2 (SV50
BMIStandard 1.5-17 GraphicsExtension 5p0p2d0
Ext_Obsolete 1.5-13 RU2d TC3) is required
Ext_VB 1.5-11 800xA SV 5.0 SP2 Rev D
Ext_VB_FPL 1.5-13
Ext_XXLog 1.5-11
800xA SV5.1
Ext_OpenAspects 1.5-10
Ext_GraphiXs 1.5-13
Ext_PG2_FPL 1.5-12

BMI_GraphiXs 1.5-12
BMI_GraphiXs_Custom 1.5-12
CustomizationExt 1.5-12

BMIEnergy 1.5-16
Ext_OpenAspects 1.5-13
Ext_Obsolete 1.5-12
Ext_VB 1.5-10
Ext_GraphiXs 1.5-12
Ext_VB_FPL 1.5-14
Ext_PG2_FPL 1.5-14
BMILib_WeightFeeder 1.5-11
Ext_VB 1.5-10
Ext_GraphiXs 1.5-11

Electrical Device Integration

Templates

BMIUserDefConstAndVar 1.5-10
BMISerialInterfaces 1.5-10
BMIUserDefined 1.5-12
Ext_OpenAspects 1.5-10
BMI_MNSIS 1.5-12
BMI_MNSiS_MBTCP 1.5-16
BMI_UMC22 1.5-12

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 12
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Minerals Library Version Library Version Required 800xA System

Versions
BMI_UMC22wExtStatus 1.5-13
Minerals Library 5.1/3a (release) Main Library Supported System Versions:
BMIConstAndVar 1.5-16 800xA SV 5.0 SP2 Rev C
BMIAdaptions 1.5-14 in addition temporary
BMISupport 1.5-11 correction for PG2 (SV50
BMIStandard 1.5-19 GraphicsExtension 5p0p2d0
Ext_XXLog 1.5-12 RU2d TC3) is required
Ext_GraphiXs 1.5-15 800xA SV 5.0 SP2 Rev D
Ext_Obsolete 1.5-14
800xA SV 5.0 SP2 Rev E
Ext_OpenAspects 1.5-11
Ext_PG2_FPL 1.5-13
Ext_VB 1.5-11 800xA SV5.1
Ext_VB_FPL 1.5-14

BMI_GraphiXs 1.5-14
BMI_GraphiXs_Custom 1.5-14
CustomizationExt 1.5-13

BMIEnergy 1.5-20
Ext_GraphiXs 1.5-14
Ext_Obsolete 1.5-12
Ext_OpenAspects 1.5-14
Ext_PG2_FPL 1.5-15
Ext_VB 1.5-11
Ext_VB_FPL 1.5-16

BMILib_WeightFeeder 1.5-12
Ext_GraphiXs 1.5-12
Ext_VB 1.5-11

Electrical Device Integration

Templates

BMIUserDefConstAndVar 1.5-12
BMISerialInterfaces 1.5-12
BMIUserDefined 1.5-14
Ext_OpenAspects 1.5-11
BMI_MNSIS 1.5-12
BMI_MNSiS_MBTCP 1.5-19
BMI_UMC22 1.5-14
BMI_UMC22wExtStatus 1.5-14
Minerals Library 5.1/4 Main Library Supported System Versions:
BMIConstAndVar 1.5-21 800xA SV5.1 FP 4
BMIAdaptions 1.5-21
BMISupport 1.5-21
BMIStandard 1.5-21
Ext_GraphiXs 1.5-18
Ext_Obsolete 1.5-15
Ext_OpenAspects 1.5-12
Ext_PG2_FPL 1.5-14
Ext_VB 1.5-12
Ext_VB_FPL 1.5-15

BMI_GraphiXs 1.5-25
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 13
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Minerals Library Version Library Version Required 800xA System

Versions
BMI_GraphiXs_Custom 1.5-16
CustomizationExt 1.5-14

BMIEnergy 1.5-23 (or 1.5-24)

Ext_GraphiXs 1.5-16
Ext_Obsolete 1.5-13
Ext_OpenAspects 1.5-15
Ext_PG2_FPL 1.5-16
Ext_VB 1.5-12
Ext_VB_FPL 1.5-16

Electrical Device Integration

Templates

BMI_ACS8x0 1.5-0
BMI_UMC100 2.0-2
(BMI_MNSIS 1.5-20)
(BMI_MNSiS_MBTCP 1.5-21)
(BMI_UMC22 1.5-20)
(BMI_UMC22wExtStatus 1.5-20)
(BMI_UsrDefConstAndVar 1.5-20)
(BMI_SerialInterfaces 1.5-20)
(BMI_UserDefined 1.5-20)
Minerals Library 5.1/4a Main Library Supported System Versions:
(Extension 1.5-16) BMIConstAndVar 1.5-22 800xA SV5.1 FP 4
BMIAdaptions 1.5-22
BMISupport 1.5-22
BMIStandard 1.5-23
Ext_GraphiXs 1.5-20
Ext_Obsolete 1.5-15
Ext_OpenAspects 1.5-12
Ext_PG2_FPL 1.5-15
Ext_VB 1.5-13

BMI_GraphiXs 1.5-28
BMI_GraphiXs_Custom 1.5-16
CustomizationExt 1.5-16

BMIEnergy 1.5-25
Ext_GraphiXs 1.5-17
Ext_Obsolete 1.5-13
Ext_OpenAspects 1.5-15
Ext_PG2_FPL 1.5-16
Ext_VB 1.5-12

Electrical Device Integration

Templates

BMI_ACS8x0 1.5-0
BMI_UMC100 2.0-2
(BMI_MNSIS 1.5-20)
(BMI_MNSiS_MBTCP 1.5-21)
(BMI_UMC22 1.5-20)
(BMI_UMC22wExtStatus 1.5-20)
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 14
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Minerals Library Version Library Version Required 800xA System

Versions
(BMI_UsrDefConstAndVar 1.5-20)
(BMI_SerialInterfaces 1.5-20)
(BMI_UserDefined 1.5-20)
Minerals Library 5.1/5 Main Library Supported System Versions:
(Extension 1.5-18) BMIConstAndVar 1.5-24 800xA SV5.1 FP 4
BMIAdaptions 1.5-24
BMISupport 1.5-24
BMIStandard 1.5-24
Ext_GraphiXs 1.5-23
Ext_Obsolete 1.5-15
Ext_OpenAspects 1.5-14
Ext_PG2_FPL 1.5-17
Ext_VBStatusViewer 1.5-0

BMI_GraphiXs 1.5-33
BMI_GraphiXs_Custom 1.5-18
CustomizationExt 1.5-18

BMIEnergy 1.5-26
Ext_GraphiXs 1.5-18
Ext_Obsolete 1.5-13
Ext_OpenAspects 1.5-15
Ext_PG2_FPL 1.5-18
Ext_VBStatusViewer 1.5-0

BMIRecipeControlBase 1.0-2
Ext_GraphiXs 1.0-1
Ext_PG2_FPL 1.0-0

Templates

BMI_ACS8x0 1.5-0
BMI_UMC100 2.0-2
Minerals Library 5.1/5a Main Library Supported System Versions:
BMIConstAndVar 1.5-26
(SV5.1 Extension 1.5-20) BMIAdaptions 1.5-24 800xA SV5.1 FP4 Rev D with
BMISupport 1.5-25 800xA Base RU2
BMIStandard 1.5-29
Ext_GraphiXs 1.5-28
(SV6.0 Extension 1.5-25) Ext_OpenAspects 1.5-14 800xA SV6.0
Ext_PG2_FPL 1.5-24
Ext_StatusViewer 1.0-3
BMI_GraphiXs 1.5-35
BMI_GraphiXs_Custom 1.5-18
CustomizationExt 1.5-18
BMIEnergy 1.5-26
Ext_GraphiXs 1.5-19
Ext_Obsolete 1.5-13
Ext_OpenAspects 1.5-15
Ext_PG2_FPL 1.5-19
Ext_StatusViewer 1.0-0
BMIAdvancedPCC 1.0-1

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 15
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Minerals Library Version Library Version Required 800xA System

Versions
Ext_StatusViewer 1.0-0
BMIRecipeControlBase 1.0-5
Ext_GraphiXs 1.0-5
Ext_PG2_FPL 1.0-1
Ext_StatusViewer 1.0-0

Templates
BMI_ACS8x0 1.5-5
BMI_UMC100 2.0-7
Minerals Library 5.1/5b Main Library Supported System Versions:
BMIConstAndVar 1.5-29
(SV5.1 Extension 1.5-21) BMIAdaptions 1.5-27 800xA SV5.1 FP4 Rev D with
BMISupport 1.5-26 800xA Base RU2
BMIStandard 1.5-31
Ext_GraphiXs 1.5-30
(SV6.0 Extension 1.5-30) Ext_OpenAspects 1.5-16 800xA SV6.0
Ext_PG2_FPL 1.5-26
Ext_StatusViewer 1.0-6
BMI_GraphiXs 1.5-37
BMI_GraphiXs_Custom 1.5-18
CustomizationExt 1.5-18
BMIEnergy 1.5-26
Ext_GraphiXs 1.5-19
Ext_OpenAspects 1.5-15
Ext_PG2_FPL 1.5-19
Ext_StatusViewer 1.0-0
BMIAdvancedPCC 1.0-2
Ext_StatusViewer 1.0-1
BMIRecipeControlBase 1.0-6
Ext_GraphiXs 1.0-7
Ext_PG2_FPL 1.0-2
Ext_StatusViewer 1.0-1
BMIAdvancedAnalog 1.5-1
Ext_GraphiXs 1.5-1
(for SV6: Ext_GraphiXs 1.5-10)
Ext_PG2_FPL 1.5-2
Ext_StatusViewer 1.0-2
Templates
BMI_ACS8x0 1.5-6
BMI_UMC100 2.0-7

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 16
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

2. List of Changes for BMI Library SV4.1

§ FF Signal Error: Handling of FF instruments error for AIS and PIDCtrl.
§ AIS IO Status: Information in the faceplate in a new Control Tab. This was
implemented to show the status for maintenance people when using S800 or FF
devices.

§ PIDCtrl IOStatus feature enables now the possibility to show the status of MV,
ActuatorPos and OUTP signals. A new Tab Control was created in order to have
this information.

§ PIDCtrl Last Mode feature enables the possibility to select what mode can be
selected after a Balance position mode. The new parameter to set that is called
“AfterBalMode” together with IO.In.SetBal can be used with the same functionality
of Clamp Mode in AC450.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 17
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ PIDCtrl FF State Machine has now the possibility to set Cascade Mode position
automatically when requested from the faceplate or from the FF Function Block.
§ PIDCtrl Indications will be now possible to select what should be shown. MV,
OutP or SP and Status Mode for the graphic display.

§ PID Direct Entry. Enabling the property EnableDirectEntry in the PIDCtrl graphic
element during edit mode of your graphic display, allows the operator to define
the setpoint directly in the graphic element without the need to open the faceplate.

§ New VLVNO1 Object. This object was created in order to cover the functionality
of a Normally Open valve in a plant.
§ SamePosDelay parameter was created to cover the possible error found in some
valves that has the actuator in the same position for a specific time. This time now
can be set for VLV1 and VLVNO1 object.
§ BMI Energy Circuit Breaker has now the possibility to make a configuration with
2 CBs and 2 Isolators. New types were created. The code is improved as well to
avoid the execution of some part of the code when the element (CBx or Isolatorx)
is not used.
§ IOStatus4 has now the possibility to chose between switch off or not when this
fault occurs. Thru BMIConst.IOS4StopMotor the user can select “True” if he wants
to force a stop in the motor when a communication fault is detected (IOStatus4 =
1). Or selecting “False” he will be able to see the information in the faceplate but
no stop force will be implemented. The default value is True.

§ Warning indication for all consumer objects (MOT1, MOT1_VVVF, MOT2,

MOTP, GrpCycleCtrl, CircuitBreaker) when we have the IO.In.Warning activated.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 18
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

3. List of Changes for BMI Library 5.0/1

3.1 General Changes

§ All changes implemented in BMI Library Release 4.1
§ Removal of group array technique in order to reduce CPU Load. This is done for the following
elements:
o MOT1
o MOT2
o MOTP
o MOT1_VVVF
o PIDCtrl
o VLV1
o VLVNO1
With this we got some reductions in the execution time of all objects:

Before implementation of PCC Bus. After PCC, the values must be changed.

Note: These values have been measured before PCC Light was added. New
measurements will be done later.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 19
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ Remaining Time Indication for the step is now shown in the Group faceplate and in the
Consumer Objects as well.

§ New alarm treatment behavior according to the new table for all objects
Alarm Failure xx5
Warning xx4
Warning Autoack 0x3
Not Ready 0x2
Event 0x1

For all objects the new Not Ready treatment (0x2) is shown when StdType equals to 1
(over constants in BMIConstAndVar).
§ New events generation for AIS, AIC, DIS, DIC and PIDctrl for blocking limits, forced and new
values forced.
§ Documentation aspects for all objects. In all the documents there is a new aspect to access
the documentation of that object. The opening of the document is made in the correct page of
the object:

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 20
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ PCC Light – Basic Functions

o Built the new PCC bus (Priority Command Connection) for the library. This new feature
enables the consumer objects to have child members. With this, all alarms can be
represented in the consumer objects faceplates. As an example, when we have an high
limit alarm in a AIS or drift switch failure, we will be able to see in the related motor
faceplate the color, message indication and the link to that objects that are causing the
failure. This information is also sent to all parent members of that motor (eg.: Group). In
the next versions, PCC will be implemented in a such way to have all interlocks being
used thru it whereas most of the interlock logic will be not necessary.

o IMPORTANT: For fast PCC indication on the FPL the OPC Server Update Rate for
text must be changed from 10000ms to 1000ms !!
o Connection of Unlimited number of AIS and DIS to a Consumer Object or Group.
o Automatic Indication of First Fault Link on the Consumer Object and Group to the DIS or
AIS that caused an Interlock stop the Consumer Object
Link from AIS, AIC / DIS, DIC Faceplate to the Consumer Tag
Disabling of AIS / DIS alarming in case of:
§ Std_Type: 0 Motor is not running, NC Valve is closed, NO Valve is Open, for PCC
connected to Group if Group is not started.
§ Std_Type: 1 Same as Std_Type 0 but always alarm on all Objects if group is
started and consumer preselected.
o In case object is standby preselected alarm priority is automatically reduced from Failure
to Warning.
o Function Block PCC_Connect_2 allows to connect two consumers or groups to one AIS /
DIS. In.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 21
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

o Function Block PCC_Connect allows to connect up to 32 consumers or groups to one

AIS/DIS. PCC_Connect_2 was kept just for upgrade compatibility reasons, but can be
easily replace by this new Function Block.

§ NLS (National Language Support): Support now for all events and alarm messages in the
alarm list. Also support for interlock and alarm messages over the faceplate. This configuration
can be done over the path below.

§ New Active X
The new Active X allows to customize all colors and label texts.
The group Active X has a lot of new indications such as:
- Preselection has changed, restart required (light blue arrow up)
- Start interlock (small arrow up in actual interlock color)
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 22
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

- Stop interlock (small arrow down in actual interlock color)

- Thick frame showing the summary status of all connected consumers and their
interlocks. If a motor got an AIS PCC H1 limit Warning the AIS shows yellow H,
the motor shows a yellow Tag and the group shows a yellow frame. This is all without
additional programming !!!
§ New Process Panel Integration
The Process Panel 800 is now integrated as a part of the BMI Library
A new PanelLink has been created and added to the Structured Data Type (MOT1Data,
MOT2Data, etc.).

The communication between a process panel and a control module now can be done thru the
Access Variables. Just enter the reference from the consumer object to the process panel
variable like this:

The communication from and to a process panel is now done with one datastream.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 23
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

3.2 Basic IO and Loop Objects

§ New Process Limit (Plim) implemented for AIS, AIC and PIDCtrl (MV Signal). This additional
limit was added and can have a Alarm Treatment for Events or No events.
§ Filtered Analog Input: Now it is possible to have the filtered signal thru AIS.
§ New Log Configuration aspect for historical back-up for the AIS and AIC element.

§ Rate of Change feature for the AIS and AIC element. Now it is possible to see the Rate of
change in % of Total Range of the SignalLowPass. Alarms for High rate of change can be set.

§ New 6 alarm delay limits This makes possible to have 6 alarm delays for the AIS and AIC
object. This setting can be done in individually in each AIS object or can be selected as default
for all AIS objects over the BMIConstAndVar, EnIndividualAlarmDelays in the AIS subgroup. For
upgrades, set this constant to true before the first download in order to have copied the actual
alarm delay in all L1,L2,H1 and H2 alarm delays.

§ New DIS and DIC faceplate provides the possibility to change forced values thru the block tab
now. Before the buttons to force were available in the reduced faceplate.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 24
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ DIS and DIC Warning time can be used to generate a warning before the effective alarm of the
DIS occurs.
§ DIS and DIC Ready Delay is a time to hold the alarm position to prevent noisy signals to clear
and active the alarm very often.

These parameters can be set thru the DIS/DIC faceplate over parameters tab. Notice
that now it is possible to enter these parameters in time format.

This is the only one object in the Minerals Library which is possible to set parameters in time
format at the moment. This functionality will be extended to all objects with time parameters in the
next versions.

§ Improvement of AIS and DIS execution time. Even with new functionalities it had been
possible to have a good result in the execution time for the IO Elements for version 5.0

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 25
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Note: These values have been measured before PCC Light (first beta release) was added. New
measurements will be done later. AddSuffix function was used instead of "+" to concatenate strings
for following SIL compliance.
§ PIDCtrl now generates signal error for OUTP. Status indication for all signals connected (i.e.:
MV, OUTP and ActuatorPos).
§ Project Constant UncertainAsGood
Over AIS constants in BMIConstAndVar there is the constant called UncertainAsGood where can
be used to ignore Uncertain quality common present in Foundation Fieldbus or Profibus PA
devices.
§ Enabling / disabling limits instead of blocking for AIS, AIC and PIDCtrl. In the new library the
concept for blocking the limits was changed. Now, the limits can be enabled \ disabled from the
faceplate instead of blocked. This was done because usually this setting is valid for the whole
project in a specific signal and we should not see block indication in these objects. As an
example, usually for a current signal is only needed the H1 and H2 limits and L1 and L2 should
always be disabled. This setting must be done now in the faceplate. When this is done, alarms
and limits calculations are not done (i.e.: L1.Value and L2.value will always be false).

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 26
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ PCC Tab indication. New tab to inform which is the parent of the IO object in the PCC bus.
The link to the referred owner is possible by clicking in the active button. This new tab is
available in all IO objects.

§ IOStatus Tab for all analog IO and PID objects, which informs the quality of signal and the sub-
status.
The followin tab is for the AIS, AIC, AOS and AOC objects

The following 2 tabs are for the PIDCtrl

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 27
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

3.3 Consumer Objects

§ FB1Mode is now implemented for MOT1_VVVF and MOT2. In the last version this parameter
was only for MOT1. Using this parameter is now possible to have pulsed switches connected to
FB1. This includes as well an indication of the Actual Pulse Period in the Faceplate. When set
1, means expected pulses of 0.1s period, when set 90, pulses of 9s period are expected.
§ Point of Control changes
The Test Mode is Removed and the Local mode has the same functionality as the test mode.
Be aware that in every existing Control Module the mapping is not modified : the former EnTest
Parameter will disappear and the former EnLoc will act for the Local Mode.
§ Real Value Parameter
The real value parameter for MC (Motor Current) and ActualPosition have been changed from
real to RealIO in order to present the correct unit and ranges in the faceplate.
§ Project Constant EnFPLStopInAllModes
This new project constant allows to configure the FPL to disable the stop button in case the
consumer object are not in Central (Cen) Point of Control.
§ Faceplate Start Button for Consumers
The faceplate start button is now disabled when the consumer object is not in Central or not
ready for start.
§ New Graphic Elements thru new aspects
Arrows, Belts, Air Slides and other graphics are now available as Graphic Elements of the
Various Objects. They automatically turn green if the Object is running. They can be found and
linked to the process displays thru the aspects of each object.
§ Additional info in the maintenance tab for all the motors. Now it is possible to see the
nominal current and the actual pulse time in case of FB1Mode > 0. This is valid for MOT1,
MOT1VVVF and MOT2.

Be aware that the Latest pulse times are in seconds units

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 28
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ Link to the group thru faceplate available now thru the Group tab.

§ Selected and running direction highlighted in the faceplate for MOT2. Running direction for
MOT2 and MOTP

§ IA Mode for MOT1VVVF is now working in the same way we have for MOT1 and MOT2.
Means that the motor will start/stop depending on the IA interlock. This was different in the past,
once Auto mode was associated to the possibility to set setpoints from the application. This
concept now was changed to Setpoint Internal or Setpoint external.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 29
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

3.4 Group Objects

§ Group Status Display for the Group and for the GroupCycleController.

Thru this new function it is possible to access all the members that belong to the group
§ New Auto Mode and Unconditional Start for the Group The Auto Mode is now stopping the
group with a NormalStop with Stopdelay instead of Qstop as before.

Using Unconditional Start the operator or maintenance user is enabled to start the group
disregarding the Ready For Start Condition for the group. As default, it has not assigned to operator
rights and can be seen only over expanded faceplate.
With new Auto Mode is possible to start/stop the group in sequence using the IA
interlock in the same way we have for the consumer objects.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 30
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ Two additional start interlocks and two additional stop interlocks. The blocks are provided
now individually for each interlock.

§ Possibility for 2000 Group GrpStopStep this feature now enables the possibility to include
motor (consumers) over 2001, 2002, etc GrpStopStep in which we have a different behavior of
consumer stoppage. Once the consumer is preselected as 200x StopStep, it will stop first when
changed the preselection. This is a usefull feature for solving some specific cases where the
running drive should be stopped first when changing the active preselection, eg.: Pump which
capacity tubulation is critical, mix conveyors where we should never have mixed material, etc.
§ New StandBy Preselection for the group indicates which is the StandBy preselected drives in
case of active preselection has some fault or interlock. This is only valid if the standby drives
are selected as StandBy drive thru IO.In.PreselStdBy. Has not automatic switch over in case of
related member has been stopped for interlocks or alarms. This feature will be provided in the
next releases.
§ New GrpCycleCtrl had its code rewritten in order to be compatible with the new philosophy of
group starts not using arrays anymore. No cold start is needed anymore after a change in the
program members. This was not possible before version 5.
Due to the high number of strings compares the GrpCycleCtrl is not SIL1-2 compliant.
The New GrpCycleCtrl present now the same feature as the Group :
- Show Member Function
- Link to FirstDriveNotRfs, Link to connected Group
- GrpCycleCtrlStatusDisplay which shows all the sub members
- Simulation for connected Consumers

§ New Step Info Tab for the Group Cycle Controller

The new TAB, Step Info, provides the possibility to see in a close detail:
- which are the steps that are running
- what is the left time for the step
- What is the configured time for the step
- What is the elapsed time for the active cycle
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 31
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

- What is the total time for the active cycle

- In a very good graphical way. All this information
- What is the next and previous step number
- What is the active step and which function is being executed (starting / overlapping)

§ New indication for stopping members for Group Cycle Controller in the graphic element. This
was done in the faceplate and in the graphic element aspect. Before was not possible to see if
the Group Cycle Controller was stopping the members, and by mistake, the operator could re-
start the Group Cycle Controller in a different program without having the stopped all the
members of the latest program.

4.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 32
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

4. List of Changes for Minerals Library 5.0/2

4.1 BMI Defaults Configuration moved to new Location

The “BMI Common” General Properties Aspect and the BMI Defaults Configuration
Display are no longer found on the BMI Standard Library Object itself. They were moved
to “ABB System/Process Graphics/BMI_GraphiXs_Customization 1.0-0” in Object Type
Structure.

4.2 Maintenance Submode

There is a new Maintenance Submode in Local Mode. It is now possible, using Project
Constants, to define if Auto / PrevDrive Interlocks resp. IB Interlocks lead to a stop in
Local Mode or not, while these are always disabled in Maintenance Submode. This allows
having the functionality of the “Test” Mode that was present in Version 4 of the Library. It
is furthermore possible to disable the IC Interlock for the Maintenance Submode via a
Project Constant.
Project Constant Name Default Value
cBMI.MOT.DisableIAPDInLoc true
cBMI.MOT.DisableIBInLoc true
cBMI.MOT.DisableICInMaint false
cBMI.MOT.EnMaint true
cBMI.MOT1_VVVF.DisableIAPDInLoc true
cBMI.MOT1_VVVF.DisableIBInLoc true
cBMI.MOT1_VVVF.DisableICInMaint false
cBMI.MOT1_VVVF.EnMaint true
cBMI.MOTP.DisableIAInLoc true
cBMI.MOTP.DisableIBInLoc true
cBMI.MOTP.DisableICInMaint false
cBMI.MOTP.EnMaint true
cBMI.VLV.DisableIAPDInLoc true
cBMI.VLV.DisableIBInLoc true
cBMI.VLV.DisableICInMaint false
cBMI.VLV.EnMaint true

4.3 Group Uploader / PCC Uploader / PCC Viewer

The GroupUploader creates “XML GrpDrvBus Content” Aspects in the System to have
correct Data shown in the “GroupStatusDisplay” even if the Group includes Objects
started via StepOneGroup Blocks, for example in a different Application.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 33
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

In a similar way, the PCCUploader creates “XML PCC Content” aspects, which contain
the Signals belonging to a certain Consumer or Group. A simple PCCViewer Aspect then
shows this Information in a table. As the Basic Object Control Modules already link to the
Consumers connected, the PCC Bus connections are now fully transparent to the
Operator.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 34
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

The PCC Viewer can be opened directly from the Faceplate, the new Button is found left
of the Alarm List.

4.4 Consumer Extension

The ConsumerExt01 Aspect is now configured via an additional Aspect replacing the
“MultiData.mdb” Configuration File in earlier Releases. See the “Minerals Library Wrapper
Objects” Manual for a detailed Description.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 35
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

4.5 Additional Links in Faceplate (“Extended Info”)

New Links to the Faceplate and Trend of the Parent Object and for a Graphic Aspect in
the Functional Structure can be shown on the Faceplate of the Consumer Objects via the
“ExtendedInfo” Parameter. See the “Minerals Library Wrapper Objects” Manual for a
Description.
Following this change, VVVFSerial got a new Trend, showing the integrated Speed,
Power and Torque Measurements, and the CircuitBreakerABBREF542Plus does now link
to its Modbus Interface Faceplate.
Project Constant Name Default Value
cBMI_S.MOTVVVF.ExtendedInfo 39
cBMIEnergy.ABBREF542Plus.ExtendedInfo 71

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 36
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

4.6 Time of last Reset is shown for all Counters

All Counters (mainly Runtime and Number of Starts) that can be reset via the Faceplate
do now also show the Date when the Counter was Reset last (or nothing if the counter
was never reset).

4.7 Deviation Alarm for MOTP and MOT1_VVVF

There is a new Deviation Alarm for MOT1_VVVF and MOTP alarming on the deviation
between the Setpoint and the Actual Value as shown in the Faceplate.

Deviation Alarm
Parameters in Faceplate
for MOT1_VVVF

Project Constant Name Default Value

cBMI.MOT1_VVVF.DevTr 2
cBMI.MOTP.DevTr 2

4.8 New ReportingCounter Object

An enhanced Counter CM “ReportingCounter” is available, which also shows the Last
Shift, Day and Month Values. See the “Minerals Library Report Objects” Manual for a
detailed Description.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 37
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

4.9 AlarmFdBckOpn / IO.Out.Run Behaviour changed

IO.Out.Run Signal is now only true if Order is sent. In earlier Versions, IO.Out.Run also
was true in case of a Contactor Off Failure (Contactor welded) or Forced Run (FdBckRun
goes true while Motor is stopped).

4.10 FB1 / FB2 Feedback Open Alarm

There are new Alarms in case FB1 / FB2 Feedback is true while the Motor is not running,
or stays true longer than FBTime after the Motor stopped. These are enabled by setting
FBxMode to -1, which already implies that this Alarm can not be enabled if FB1 is a pulse
(FB1Mode > 0).

4.11 AlarmFdBckSubTxt / AlarmFBxSubTxt

An additional Text is generated if a FdBck Alarm or a FB1/FB2 Alarm is issued, which is
added as a Suffix to the Alarm Message. It takes one of four Values:
On Signal is not true after Order goes true + Timeout
Off Signal is not false after Order goes false + Timeout
Trip Signal goes false while Order is true
Frc Signal goes true while Order is false

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 38
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Some new Project Constants were added, which contain the Suffixes:
Project Constant Name Default Value
cBMI.AE.FBFail_Frc_SuffixTxt ' Frc'
cBMI.AE.FBFail_Off_SuffixTxt ' Off'
cBMI.AE.FBFail_On_SuffixTxt ' On'
cBMI.AE.FBFail_Trip_SuffixTxt ' Trip'

4.12 IA Indication for Drives in Auto Mode

The IA Interlock is now shown with white Background color in the Faceplate for
Consumers with EnAuto being true.

4.13 Group Single Stepping

The Group does now support to start only the next Step not started / the first Step not Off
as shown in the Faceplate, via the Next/Prev Buttons.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 39
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 40
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

4.14 Start Speed Setpoint configuration for MOT1_VVVF

New Parameters were introduced to give the possibility to adjust the Speed Setpoint while
the Motor is stopped, or to keep the Setpoint at the last Value when the Drive is stopped.
Default behavior is still to set the Default Setpoint to the predefined Value set in the
Application.

new settings in Maintenance

Tab, if Control Module
Parameter
“ExternalStartSpeedSP” is set
to false

Additionally, two Settings via General Properties allow to give the Operator the Possibility
to always change the Setpoint via the Faceplate.
General Properties Property Description
Aspect
BMI Mode Control Common.Setpoint.EnSPChng Allow to change the Speed Setpoint in
WhileStopped Faceplate while the Motor is stopped
BMI Mode Control Common.Setpoint.EnSOPChng Allow to change the Speed Setpoint in
InLocal Faceplate while the Motor is in Local

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 41
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

4.15 AIS Signal Error Delay

The AIS Signal Error can be configured to first give a Warning only and delay Failure and
setting ErrVal with the new Signal Error Delay Parameter found in the Faceplate.

Project Constant Name Default Value

cBMI.AE.SigErrWarn_AckRule 1
cBMI.AE.SigErrWarn_Sev 550
cBMI.AE.SigErrWarnTr 2
cBMI.AIS.SigErrDelay 0s
cBMI.AIS.SigErrWarn_txt ‘Signal Error’
Note that the initial Value of the Project Constant is set to 0 seconds to keep the current
behaviour, but as the Value is coldretain, SigErrDelay should be set before starting to
program, to have a proper initial Value on all Objects.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 42
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

4.16 Link to DTM from AIS Faceplate

A new Link to the DTM Faceplate/Configuration Aspect can be configured per AIS using
General Properties.
General Properties Property Description
Aspect
BMI DTM Link FPLAspectLink.DTM.ObjectName Name of the DTM Object
BMI DTM Link FPLAspectLink.DTM.AspectName Name of the DTM Aspect
BMI Overlap Link FPLAspectLink.DTM.DefaultAspectName Default Name of the DTM
Aspect

4.17 New LCB Types for Jog control (combined on/off)

LcbTypes 5, 6 and 7 have been introduced.

4.18 Name (Tagname) increased from 20 to 24 characters

4.19 Bug correction summary

Holcim colors improved
New Workplace type (Holcim standard)
DIStxt now always visible for blocked DIS
FPL start buttons disabled if action not possible
CircuitBreaker discrepancy alarm disabled if CB is in local
Disabling of parameter changes when “external limits” are selected
StartWarning does now correctly work for Group with StwFirst = true
For a detailed log of changes, see the “revision history” found in each Control Module’s
Start_Code Block.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 43
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

5. List of Changes for 5.1/0

5.1 Support for PG2 graphics

This version supports PG2 graphics for the minerals library with an exception for the
energy library, thus single line displays have to be designed with VBPG till service pack
one of Minerals Library 5.1/0.

5.2 New Installer / System Extension

Minerals Library 5.1/0 comes with a new installer and can be loaded as a system
extension. No individual import of AFW files is required. See Installation chapter in this
document.

5.3 Licensing
The library uses the 800xA licensing mechanism

5.4 Released Libraries / Release Handling

All individual libraries have a library version to make it possible to identify what is installed
in an actual project.

5.5 New Direct Entry Window Step and Limits configuration

New Parameters have been introduced to configure the Step size and the relative Limits
on Direct Entry Windows for the AOS/AOC, MOT1VVVF, MOTP and PIDCtrl Blocks.
It is now possible to specify Limits relative to the current Value.
Also, an additional Speed (Change rate) Limitation has been introduced for the AOS/AOC,
MOT1_VVVF Setpoints and the MOTP OrdAO (used for AnalogCtrl type only). The
PIDCtrl had this Feature already.

5.6 New General Properties

For PG2 graphics a new General Properties Aspect “BMI NG Common” located under
[Object Type Structure]\Process Graphics\BMI_GraphiXs_Customization\BMI Common
was introduced. Properties can be used to change the general presentation style and
behavior of the PG2 graphics. Details are described in chapter “4.2 PG2 Expert user
Graphic appearance customization” of the document Minerals Library Overview (3BHS
161555).
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 44
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

5.7 New handling for BMI Workplace Properties

For PG2 graphics the BMI Workplace properties used to configure the graphic
presentation options per workplace are replaced the logical color aspect “BMI NG
Common settings” Details are described in chapter “4.2 PG2 Expert user Graphic
appearance customization” of the document Minerals Library Overview (3BHS 161555).

5.8 Operator Note Indication

PG2 graphics allow indication of a label in case an operator note is present on a

consumer object.

5.9 Pre-selection Password and Shift + Click

· Password: Replaced by 800xA standard Authentication functions (see Pre-Selection manual)
· Shift + Click: Replaced by 800xA standard click and apply

5.10 Show Tag

Drive core can now present the tag without additional graphic element. The MOTxTag
graphic elements are no more supported. Show Tag button on the group works now
without additional engineering effort in the displays.

5.11 Individual configuration of value and unit size

For all analog value presentations the size of the value and the unit can be set
individually. The new default is that the unit is smaller than the value.

5.12 Transparent Color Support for Process Graphics

All Minerals GraphiX Process Graphics support transparent colors (alpha colors).
The alpha value can be set globally and / or individually. This feature
allows creation of displays with less dominating static parts. Details
are described in GraphiXs User Guide (3BHS 294896)

5.13 Direct Entry for Group

Beside the analog output and PID as well the group can now be started or
stopped by direct entry buttons without opening the faceplate. The option can
be disabled globally or per instance.

5.14 Discontinued / Renamed Process Symbols and Graphic Elements

Object VB Graphic Elements Replaced by PG2 Graphic Element
AOC AOCSlider AOCBar
AOS AOSSlider AOSBar
GasAnalyzer GANotMeas GAStatus
GasAnalyzer GAStatus GAStatusOverview

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 45
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Object VB Graphic Elements Replaced by PG2 Graphic Element

GasAnalyzer GASumFault GAFailure
MOT1 MOT1Tag Discontinued
MOT1F MOT1FB1Txt MOT1FBTxt
MOT1 MOT1FB2Txt MOT1FBTxt
MOT1_VVVF MOT1_VVVFTag Discontinued
MOT1_VVVF MOT1_VVVFFB1Txt MOT1_VVVFFBTxt
MOT1_VVVF MOT1_VVVFFB2Txt MOT1_VVVFFBTxt
MOT2 MOT2Button Discontinued
MOT2 MOT2Tag Discontinued
MOT2 MOT2FB1Txt MOT2FBTxt
MOT2 MOT2FB2Txt MOT2FBTxt
MOTP MOTPButton Discontinued
MOTP MOTPTag Discontinued
PREBIN PREBINSymbol Discontinued
ReportingCount ActualShiftandUnit ReportCountandUnit
ReportingCount LastShiftandUnit ReportCountandUnit
ReportingCount LastLastShiftandUnit ReportCountandUnit
ReportingCount ActualDayandUnit ReportCountandUnit
ReportingCount LastDayandUnit ReportCountandUnit
ReportingCount ActualMonthandUnit ReportCountandUnit
ReportingCount LastMonthandUnit ReportCountandUnit
VLV1 VLV1Tag Discontinued
VLVNO1 VLVNO1Tag Discontinued

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 46
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

Process Symbol Replaced by

MixerRun3D Discontinued
CircleRun3D Discontinued
Bubble Discontinued
TimeScale Discontinued
TankHorizontal3D TankHorizontal3D and TankVertical3D
KilnRun3D Gear3D
MillRun3D Gear3D

5.15 Discontinued graphic element appearance options

See also in 01 Minerals Library Overview (3BHS 161555)
Graphic Element Regards to Description
All BlockVisible EnableBlockInd can now be changed as Common
Property
All BlockAppearance Block Indication only as Label
All Orientation replaced by the now default Rotation/Transform
possibility
AISandUnit / Signal Quality Bad SignalQualityBad only on background
AICandUnit
Group01 Alarm Appearance No alarm color on symbol.
Alarm only available as “Thick Frame”, “Thin Frame”,
“Arrow” or “None”.

Thick Frame

Thin Frame

Arrow
BeltConveyor SymbolType No additional appearance for TubeConveyor. Use
SymbolType = BeltConveyor instead.
MillVertical3D SymbolStyle Discontinued
Screen ScreenType Discontinued
GradientCone3D ConeBottom / Merged to one single ConeStrength Property
ConeTop
Listing not complete…

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 47
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

6. List of Changes for 5.1/1

6.1 New Features and Functions

6.1.1 PG2 Graphic Elements for BMI Energy Library

All Graphic elements for the BMI Energy library (e.g. Circuit Breaker) are now available in
PG2 as well. In addition the elements support:
- dynamic coloring of bus bar (see Energy Library Manual)
- presentation of earth switch only
- line width > 1 depending on symbol size

6.1.2 New Process Symbols

All process symbols are described in detail in [16] Minerals Library GraphiXs User Guide
(3BHS 294896).
· CircuitSymbol: Static symbol for single line graphic displays to display electrical
machines. Symbol type available for transformers, motors and generators. Replaces
VB Graphic Element “PowerSymbol”.
· SingleLine: Static symbol for single line graphic displays. Displays a straight line and
supports voltage colors.

6.1.3 New Direct Entry Window

An extended direct entry - numeric key pad pop-up - window is available for the objects
listed below:
Object Graphic Element PG2
AOC AOCandUnit
AOC AOSBar
(Drag handle must be switched off)
AOS AOSandUnit
AOS AOSBar
(Drag handle must be switched off)
PID PIDCtrl
MOT1_VVVF MOT1_VVVFCtrl
MOTP MOTPCtrl
Workplace specific settings for standard and extended DEW are described in [1] Minerals
Library Overview (3BHS 161555).

6.1.4 Separate and open extension libraries for VB6 Faceplates

This allows the user to modify faceplates if required. Faceplate elements are still
protected. The Idea is that the user creates a copy in case modifications are required.

6.1.5 Changed property default value

Graphic Element PG2 Property New Default Value
Group01 ActionStopButton SystemDefault

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 48
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

BMI Process Symbols Property New Default Value

Text EnableLogicalColor True
Text TextColor BMIstaticText

6.1.6 Additional DOS / DOC Button functions

· Added two new button types (set and reset signal). The now available button types
are listed below.
o toggle
o single pulse
o while down: set signal
o while down: alternate
o set signal (new)
o reset signal (new)
· Button shows pending confirmation, when using applied action.
· Improved buttons behavior: Button reacts on mouse up event only and no action is
triggered when the mouse pointer is dragged out of the button (concerns button type
“toggle”, “single pulse”, “set signal” and “reset signal”).
· Enable/Disable with the standard property “EnableInput” is now possible.
· Supports object colors and indication category colors as described in (2) Minerals
Library Basic Objects (3BHS 161556)

6.1.7 Extended DOS and DOC logical color options

· DOS and DOC Supports object colors and indication category colors as described in
(2) Minerals Library Basic Objects (3BHS 161556).

6.1.8 Extended Drive graphic elements logical colors

· All drive graphic elements PG2 (MOT1, MOT1_VVVF, MOT2, MOTP, VLV1 and
VLVNO1) uses indication category colors. By this on / off color for motors can e.g. be
different form valve etc.

6.1.9 Improved PreBin button

· Button shows pending confirmation, when using applied action.
· Improved button behavior: Button reacts on mouse up event only and no action is
triggered when the mouse pointer is dragged out of the button.
· Enable/Disable with the standard property “EnableInput” is now possible.

6.1.10 Improved increase/decrease button for AOS, AOC and PID

· Enable/Disable with the standard property “EnableInput” is now possible.
· Improved button behavior: Button reacts on mouse up event only and no action is
triggered when the mouse pointer is dragged out of the button.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 49
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

6.1.11 Better presentation of graphic elements in design mode

Improved graphic element handling in Process Graphics Editor (Edit Mode). The
presentation in edit mode is equal to the status quality bad indication. No changes for live
mode presentation. By this it’s easier to estimate the required space in case no live data is
available during the graphic design phase.
Edit Mode Live Mode

6.1.12 MOTP – Control Function

Project constant cBMI.MOTP.DisableFrcAlrInConPu to disable forced run alarms in
ConPu (Auto or E1) mode. Default = false

6.1.13 PIDCtrl – Control Function

Addition Parameter SigErrBalCtrl to control the PID balancing action in case of a Signal
Error. The options are:
· 0 off, no action
· 1 default, go to balancing for 10s
· 2 go to balancing for 10s, only when in AutoModes

6.1.14 Group Status Viewer

The Group Uploader and Group Status Viewer have been updated to support status
indication of Circuit Breaker.

6.2 Corrected Errors

6.2.1 PG2 GraphiXs error correction summary

· GroupCycleCtrl_Info: String parse error fixed
· Migration of Process Symbol BucketElevator now sets correct line thickness.
· Migration of Process Symbol EP could fail (migrate to a wrong aspect) in certain
cases. This problem is fixed.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 50
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

· Migration of graphic elements MOT1FBTxt, MOT1_VVVFFBTxt and MOT2FBTxt

could cause an error in the Migration Tool. This problem is fixed.
· AOCBar / AOSBar corrected low limit indicator position.
· Graphic element VLV1 and VLV1NO did not indicate the state “open” correctly when
using certain indication types such as A00_Rectangle or A01_Motor. This problem is
fixed.
· Graphic element PIDCtrl, MOT1_VVVFCtrl and MOTPCtrl now indicates the signal
errors for every analog value independently.
· AOCBar / AOSBar corrected drag handle appearance.
· Correction of shape quality in Cone 3D and Silo3D
· Text, the PG2 Text behaviors for Logical colors been corrected

6.2.2 Control Module error correction summary

· MOTP Setpoint Range in E1 Mode was limited to the setpoint limits minus 4 times the
Deadband, because of an Error introduced in the previous version.
· MOTP was still in Auto/E1 mode after a trip instead of switching to Man.
· PulseCounter and ReportingCounter Integration Count Mode changed to use
getActualIntervalTime Function for measuring the correct Time between Samples.
· MOT2 with “EnAuto=true” was set to auto during Group start and then stopped again
by Group if not both preselections active. Corrected to work properly with Group start
if only one preselection active.
· CircuitBreaker parameter LocalControl: Initial value changed from “false” to
cBMIEnergy.CB.LocalControl_Inverted.
· CircuitBreaker AlarmDiscrepancy: ClosedStored/OpenStored status was reset by an
open/close command although an interlock was active, which in Simulation mode also
resulted in loss of PosCls/PosOpn feedback even though the breaker was not
switched.
· CircuitBreaker: corrected calculation of SumIntTr so blocked interlocks are ignored
· When a MNSiS MOTx was stopped by Auto mode, there was a chance the Availability
returned 2 cycles after the loss of FdBckRun, thus generating a “Not Ready or in Test”
Alarm. This prevented the drive from being restarted again automatically. Added
bypass for a duration of 3 cycles.
· MNSiS MOTx FdBckTime was by default = 2s. As the communication has some delay
and downloads cause a short loss of communication, the FdBckTime was increased
to default=4s. This helps preventing unnecessary “Not Ready or in Test” or “Contactor
Fault On/Off” alarms during CBM download. This time can be adjusted via the new
project constant cBMI.MNSiS_MBTCP.FdBckTime.

To match this setting on the hardware side, the MControl parameter “CF Timeout”
should be set to 5000ms (old setting 3000ms).
· MNSiS MOTx showed “MCtrl Comm Error” Warning if in LOC, LCB Stop active and
MStart racked out. Corrected to show an M3 alarm.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 51
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

6.2.3 VB6 Graphics error correction summary

PIDCtrl, the switching between Mode Text indication from Controller (OPC) and static text
(NLS) did not work correctly. Now the option ModeIndType = 0 (Static text) shows NLS
based text as below:
· NLSModeE1 = NLSID_Button_E1 (“E1”)
· NLSModeE1Auto = NLSID_Button_E1A (“E1A”)
· NLSModeE1Man = NLSID_Button_E1M (“E1M”)
· NLSModeE2 = NLSID_Button_E2 (“E2”)
· NLSModeE2Auto = NLSID_Button_E2A (“E2A”)
· NLSModeE2Man = NLSID_Button_E2M (“E2M”)
· NLSModeE3 = NLSID_Button_E3 (“E3”)

6.3 Discontinued and changed Features and Functions

6.3.1 2nd CB within the Circuit Breaker Control Module

The second circuit breaker CB2 within the Circuit Breaker Control Module has been
removed completely. Accordingly all obsolete presentation options have also been
removed (Type 7, 8, 201, 204, 205 and 207).

6.3.2 Indication Type Handling of Circuit Breaker

The selected indication type of the CB in the process display is now directly setting the
correct appearance of the faceplate; it is no longer necessary to enter the matching type
in the control module. The control module parameter “CBType” is obsolete but kept for
compatibility reasons. As of now the parameters “CBEnable”, “Isol1Enable” and
“Isol2Enable” are used to enable the specific breaker and allow interaction from the
faceplate.
The following components of the structured variable “CircuitBreakerIntAct” have been
removed:
· EnCB bool retain 0 Indication of CB Enabled
· EnIsol1 bool retain 0 Indication of Isol1 Enabled
· EnIsol2 bool retain 0 Indication of Isol2 Enabled
· EnIsol1ESW bool retain 0 Indication of ESW for Isolator 1 Enabled
· EnIsol2ESW bool retain 0 Indication of ESW for Isolator 2 Enabled

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 52
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

6.3.3 Library Versioning

The versioning of the Minerals Control Modules and Function Blocks has been changed
from the Minerals package version to the actual Library version.
The following Libraries have been updated to the new system:
o BMIAdaptions
o BMIEnergy
o BMIStandard
o BMI_MNSiS_MBTCP
o BMI_REF542PlusMBTCP

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 53
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

7. List of Changes for 5.1/2

7.1 New Features and Functions

7.1.1 PCC Interlocks (Process Control Connection)

· For AIC, AIS, DIC, DIS and PIDCtrl the type and direction of interlock can be
configured on each alarm/process limit.
· Signal specific Start Inhibit time to bypass interlocks during start up.
· Possibility for each signal to bypass interlocks in Local mode by continuous
operation of LCB Start.
· PCC Connect with provision to mask interlock forwarding for each connected
consumer.
· New PCC Threshold AND3 Function Block to integrate conventional interlock logic
into PCC Interlock concept.
· PCC Viewer updated to show actual configuration and status of all connected
children.
· NLS support for PCC Viewer

7.1.2 Minerals GraphiXs PG2 Faceplates

· New Minerals GraphiXs PG2 Core Elements for Faceplates
· PG2 Faceplates for Standard, Energy, and Energy Management Libraries

7.1.3 Minerals GraphiXs PG2 NLS Support for NLS Texts defined in the AC800M

7.1.4 Prebin Button: New Property “EnableColorBar”

It is now possible to hide the colored bar on the button’s top side for each instance
individually.

7.1.5 AIC, AIS, DIC, DIS, PID – Control Function

Parameter PCCAEListFrcEn: PCC AE List handling forced to be always on and not
controlled by PCC parent.

7.1.6 AIC, AIS, DIC, DIS, PID, MOTx, VLVx – Control Function
Project constant cBMI.AE.EnAutoALAckInLoc to disable auto acknowledge of alarms in
Local mode.

7.1.7 AIC, AIS, PID – Control Function

Parameter LogTr: If events on limit value change are not needed, eventing can be
disabled.

7.1.8 AIS – Control Function

ErrTr parameter added to have the possibilty of changingSignal Error AlarmCond Severity
by instance. Default = cBMI.AE.SigErr_Sev

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 54
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

7.1.9 AOC, DOC – Control Function

Last value is retained during cold restart if AOC/DOC was in Manual mode.

7.1.10 Log Configuration Extension Libraries

The Object Type specific Log Configuration Aspects are moved into Open Extension
Libraries. This allows deactivation or modification of Minerals Log Configuration Aspects.

7.2 Corrected Errors

7.2.1 Control Module error correction summary

· VVVFSerial Torque Scaling parameter now applied correctly.
· MOTP: changed the requirements for the Group Condition to be true. If a RFS
Interlock is active but the desired position was already reached, the Group
continues with the next step.
· Group: Description of ICTxt and IATxt corrected: Normal stop executed
· MNSiS_MBTCP_Comm: changed default value for CommImmediateRestart to
false
· Prebin: corrected bug where as in certain cases IO.ExtSet did not work.
· Corrected Cold Start behavior. Under certain conditions it was possible that Motors
resumed the last state after an AC800M power failure in case the power failure did
not affect the S800 IO as well.

7.2.2 PG2 GraphiXs error correction summary

· Generic Element DigitalCore: Corrected select frame indication.
· Generic Element DigitalCore: Direction Change Indication corrected.
· Generic Element DriveCore: Corrected select frame and alarm block frame
drawing level and size.
· Generic Element AnalogTextCore: Property Font and EnableFont had no impact.
This is corrected.
· Generic Element AnalogValueCore: Corrected alarm appearance when direct
entry is active.
· Graphic Element PulseCount: Corrected wrong general property reference.
· Graphic Element CBValueAndUnit: Corrected wrong general property reference.
· Generic Element EnergySwitchGearCore: Write properties SelectCB,
SelectDisc1ES1 and SelectDisc2ES2 did not behave correctly on mouse click, in
case EnableSelect is true. This is corrected.

7.2.3 PG2 GraphiXs Default Value Changes

· AISText and AICText: All normal texts (TextIndTrXXNormalPos) default is now the
same as abnormal texts (TextIndTrXXAbnormalPos) default.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 55
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

7.2.4 WebView Uploader config correction

The MNSiS WebView uploader configuration was changed so Cubicle and Position
numbers are mapped correctly.

7.2.5 Changed General Properties Defaults:

· BMI Mode.Control.Setpoint.EnSPChngWhileStopped = true
· BMI Mode.Control.DisableLocalModeIfRun = true

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 56
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

8. List of Changes for 5.1/2a

Minerals Library 5.1/2a is a maintenance release correcting some issues that caused
problems in various projects

8.1 New Features and Functions

8.1.1 New Open Extension Libraries for VB Graphic Element and Faceplate Elements
This was introduced as several customers used modified versions of the VB Graphic
Elements. The PG2 Elements will remain closed. Projects required changes in PG2 have
two options:
1. request a change in the library
2. create a copy of the PG2 graphic element in an own extension library

8.1.2 New Open Extension Libraries for Property Override Aspects

Property Attribute Override aspects are now stored in open extensions libraries so
projects are able to change it in the Object Type

8.1.3 New 2 and 4 screen workplace templates for PG2

8.1.4 ActiveX ConsumerExt.ocx – Property HTMLOnObject

The ConsumerData control of the ConsumerExt.ocx used to present status information
from Electrical and Device Integration has got a new property: HTMLOnObject
If this is set to true the HTML Aspect holding the configuration data can be on the same
object as the Graphic Element with the ConsumerData user control. Before only
configurations having the HTML Aspect in the wrapper has been possible.

8.2 Corrected Errors

8.2.1 DOC Value Reset during Control Builder Download

In case the DOC was in Manual the value was reset during application download with
control builder.

8.2.2 New VB Date and time user control for VB workplaces

The AxtiveX showing Date, Time and User in the VB workplace header increased the risk
of having texts indication problems in VB. For details on the correction see:
\Patches\DateTimeUser_Replacement

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 57
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9. List of Changes for 5.1/3

9.1 New Features and Functions

9.1.1 BMI GraphiXs

· Dynamic coloring is now supported by Process Symbol SingleLine and CircuitSymbol.
More detailed information in [16] Minerals Library GraphiXs User Guide (3BHS
294896) and [8] Minerals Library Power Distribution Monitoring Objects (3BHS
253000).

9.1.2 Parameterized PreSelections

· Supported Control Modules: MOTx, VLVx, GrpCycleCtrl and PIDCtrl
· The PreSelection assignment is set as a String parameter on the individual Control
Module.

9.1.3 Duty Stand-by Switch Over

· Supported Control Modules: MOTx, VLVx and GrpCycleCtrl
· Each PreSelection can be selected as StandBy if it is assigned to a StdByPreselGrp.
· If a consumer, which is assigned to the active PreSelection, trips, a change over to the
StandBy selected PreSelection in the same StdByPreselGrp will occur within 2 Normal
task cycles. If no StandBy is selected no change over will occur.
· Each consumer features the TripOverride parameter. If True a trip of this consumer
will not initiate a switch over.
· The change over mechanism also works during a Group start: the Group will
momentarily go in Hold, the PreSelection change over will occur and the Group will
start again from the lowest not active step.
· Each PreSelection features an ExtTrip input which also initiates a change over to the
StandBy PreSelection in the same StdByPreselGrp.
· Existing but never used variables concerning Standby have been removed

9.1.4 Additional Value Treatment

Value treatment has been extended to a 4th level
o New Project constants for Severity, Text and AckRule
o New logical color
o Changed code in BMIGraphiXs and Control Modules
o Default setting in AE have not changed, projects using the 4 th level need to
change AE list settings themselves
o Description is available in Minerals Library Overview manual

9.1.5 MOTx, VLVx, GrpCycleCtrl and CircuitBreaker – Control Function

New possibility to set POC via IO.In.SetSeq, IO.In.SetCen and IO.In.SetLoc.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 58
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9.1.6 MOTx, VLVx – Control Function

· New project constant cBMI.*.DisableIBInMaint to allow the possibility to also have IB
interlocks active in maintenance mode.
· New project constant cBMI.*.EnMaintInCenSeq to allow setting of maintenance mode
in Cen and Seq mode.
· New project constant cBMI.*.EnMaintOnlyIfStopped to allow setting of maintenance
mode only if the consumer is not running.
· New project constant cBMI.*.KeepMaintInCenSeq to keep Maint mode once it is
selected even if switched back to Cen/Loc
· New project constant cBMI.*.DisableFPLLocIfLCBIsPOCMaster to disable the Loc
button on the faceplate if the LCB is POC master (according to LCBType)
· New project constant cBMI.*.FieldStopIfNotRemOrLoc to enable/disable Fieldstop if
POC LCB and neither Rem or Loc is active
· New LCB Type 8 for Toromocho project: LCB only switches between Rem and Loc.
Loc sets consumer to Loc mode, operator then acknowledges this by setting it to
Maint mode. Only if the consumer is in Maint mode it can be started/stopped via FPL
buttons.

9.1.7 MOTP – Control Function

· Added M3 Alarm

9.1.8 PCC_ThresholdAND3 – Control Function

· Added IntlkTr parameter to allow correct indication for IA/PD Interlocks and AutoStart

9.1.9 MNSiS MOTx – Control Function

· SlaveDriveType added:
o -1 : Single Drive
o 0 : Master
o 1 : Slave in a master/follower relationship with common LCB

9.1.10 VVVFSerial – Control Function

· If drive is configured as Slave then FdBckRun is delayed so the Slave can be
sequence started by the Master without getting a Forced Run alarm

9.1.11 MNSiS MOTP – Control Function

· New project constant cBMI.MNSiS_MBTCP.DisableM1forMOTP for disabling M1

9.1.12 ReportingCount – Control Function

· Manual change of shift by new variable IO.NextShift

9.1.13 FPL - Trend tab added

Additional trend tab for the following objects:
· MOT1 / 2 - Current indication

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 59
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

· MOT1_VVVF - Current, Speed SP and Actual indication

· MOTP - Position SP and Actual indication
No log configuration aspect configured

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 60
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9.1.14 Additional properties for Graphic Element PG2

9.1.14.1 PREBIN – Additional Properties

Additional properties for the PreBin:
· PreSelIndType - "0 = None, 1 = Default, 2 = Icon"

o0 =

o1 =

o2 =
· VerticalAlign - "Function available if PreSelIndType=2 and StdByIndType=2"

o False =

o True =

9.1.14.2 AIC / AIS / AOC / AOS – Additional Properties

Additional properties for the AxyandUnit:
· EnableLogicalColor Default = False
"If EnableLogicalColor is true, then all used colors are logical colors."
· ValueColor Default = BMIvalueMV (AI) or BMIvalueOUT (AO)
"Value color. Only applied if EnableLogicalColor is set to false."
· EnableFitToBestSize Default = True
"Set best unit size"
Additional properties for the AxyBar:
· EnableLogicalColor Default = False
"If EnableLogicalColor is true, then all used colors are logical colors."
· BarColorCustom Default = BMIvalueMV (AI) or BMIvalueOUT (AO)
"Bar color. Only applied if EnableLogicalColor is set to false."

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 61
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9.1.15 IndTr extension

This extension is implemented in all core Generic Elements.
· IndTr extended with priority 5 color
· New Logical color aspect “BMI Event 2 Colors“ for P5 color definition
No extension made in the alarm list for Priority 5!

9.1.16 DigitalCmdButtonCore
Two new Input Properties “ValueSet” and “ValueReset” to define the value applied to the
variable(s) connected to SetSignal and ResetSignal. By setting ValueReset = false the
element works now as well in cases the same variable is connected to SetSignal and
ResetSignal.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 62
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9.2 Corrected Errors

9.2.1 Control Module error correction summary

· PIDCtrl: Parameters MV_PHiLim, MV_BlkPHiLim, MV_PLoLim, MV_BlkPLoLim are
now correctly handled at initial download.
· REF542Plus: Corrected calculation factor of ReactiveEnergy
· PFCCtrl: Changed initial value for ModeTxt and StatusTxt to new project constants in
Energy library (earlier taken from Energy MNGT library)
· VVVFSerial: corrected condition for FundamentalIntlk as it did not work properly.
As soon as the drive was running the FundamentalIntlk was active (=false)
· MOT1, MOT1_VVVF, VLVx, CircuitBreaker and GrpCycleCtrl: A continuous activation
of IO.In.SeqStart (or the equivalent for other types) was forcing the module to Seq
mode.
· MOTx, VLVx and GrpCycleCtrl: corrected condition for displaying RemainTimeforStep
in Auto mode.
· MOT2, MOTP: corrected PCC Status2 writing for StartStepPreselYMem
· MOTP_LCB: corrected Loc/Rem switching for LcbLoc/LcbRem input
· PCC_Connect: corrected writing of DriveEnWrite variables
· StepOneGroup, StepTwoGroup: Deleted PreSelStdby parameter as it was anyway
not used
· MNSiS MOTx: changed alarm suppressing: FdBckRunOffDelayed1st/2nd/3rd are set
in the Fast task to make sure even short Order pulses are registered
· MNSiS MOT1: LcbType parameter removed and hardcoded Type 4 on MOT1
instance
· MNSiS MOTP: SerialLink.M1 (PTC) was not used for MOTP because normally
actuators don’t have PTC. In case this input was used for other purposes which
should stop the motor it did not work properly. This was fixed as MOTP now also
features M3 alarms.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 63
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9.2.2 Faceplate correction Summary

· DOC Faceplate Auto Button corrected
· PCC links in Group, Consumer and PID FPL did not work in case sub string like
Failure, Warning was not used. (e.g. projects using NLS)
· Group Tab did not show step numbers > 100
· GrpCyclCtrl StepInfo Tab Total Time shown in the Progress Bar, the
recalculation in case of StatusOff is corrected.
The correction is made in:
o Core Elements, GroupCycleProgressBarCore
· Group and GrpCyclCtrl summary status and text, correction (priority, text, color)
indication
· LcbStart buttons for LcbType 8 are now correctly enabled/disabled depending on
active interlocks.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 64
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9.2.3 Graphic Element and Minerals GraphiXs core correction Summary

· Improved dynamic status color calculation in BMI Core Elements
EnergySwitchGearCore, to prevent a wrong status indication (caused by rare linking
constellation). BMI_GroupCycleProgressBarCore
· GrpCycleCtrl loop that caused memory leak in PG2 graphics corrected
o BMI_GroupCycleCore
o BMI_GroupCycleProgressBarCore
· FPL Base Tab MuxText corrected to not show “off” in case of no text is defined.
The correction is made in:
o Basic Faceplate Symbols, BMI_TextInd
· Warning in diagnostic tool: Data type changed from Real to Float.
In SV5.1 some graphic items in Graphics Builder (Core function) has changed
the Data type from Real to Float.
The recommendation is: Please save and reopen aspect to remove this
message.
To be able to save an Generic Element there is a new open extension lib of
BMI_GraphiXs available: BMI_GraphiXsExt.
The related Generic Elements PG2 are:
o Standard Symbols, BMI_ValueAndUnitInd
o Basic Symbols, BMI_DragVertical

9.2.4 Security
· MOTP IntPar.SetOutOfService changed from “operate” to “tune” as for all other
objects

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 65
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

9.3 PCC Viewer

· Each call up creates a new viewer instance (window is pinned as default)
· New category showing auto start conditions
· Threshold_AND3 (x out of y) correction
· Threshold_AND3 sub conditions color definition changed
· When closing the viewer the window is minimized until it is removed, thus giving better
graphical feedback for the operator
· IndTr4 support
· Switching PCC Viewer between multiple consumers without closing the window in
between caused the Viewer to crash and not to display any data.
· An error during call up could cause duplicate entries which then caused wrong
indication of the table.
· Improved OPC data collection routine to prevent the Viewer from hanging during build
up which can cause the whole workplace to not respond anymore.

9.4 Group Status Viewer

· NLS text resources now used for viewer
· IndTr4 support
· Parameterized preselection support
· Option to show preselection details
· When closing the viewer the window is minimized until it is removed, thus giving better
graphical feedback for the operator
· Same table behavior applied as for PCC Viewer (size, toolbar, column resizing)

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 66
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

10. List of Changes for 5.1/3a

10.1 New Features and Functions

10.1.1 Group – Control Function

New parameter StwMode to define Start Warning behavior on Group level

10.1.2 AIC, AIS, DIC, DIS – Control Function

New IO.Name variable to have the signal name available for glue logic

10.1.3 VVVFSerial – Control Function

· New project constants for IOStat4Txt and M2Txt instead of hard coded text
· New InterfaceType = 7 for ACS2000

10.1.4 PCC Status

Added Started states to PCC Status2 word

10.1.5 PCC_Theshold_AND3 Faceplate

· Faceplate with presentation of conditions and FB configuration
· Blocking of individual conditions (also shown in PCC Viewer)
· Condition On/Off delay settings
· Event list for blocking actions

10.1.6 PCC Viewer

· General Property BMI PCCViewer FontName added
o Possibility to select different font depending on the language used
· General Property BMI PCCViewer FontCharset added
o Possibility to select different code pages depending on the language used
(default = 0, cyrillic = 204, greek = 161)

10.1.7 PCC/Group Uploader

Changed Uploader to also work on Control Application level.
Uploader instances auto instantiated on Control Application object for faster and more
targeted upload.

10.1.8 Group/GrpCycleCtrl Status Viewer

· General Property BMI GroupStatusViewer FontName added
o Possibility to select different font depending on the language used
· General Property BMI GroupStatusViewer FontCharset added
o Possibility to select different code pages depending on the language used
(default = 0, cyrillic = 204, greek = 161)
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 67
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

· Library Member moved from BMIStandard to BMIStandardExt_OpenAspects to be

able to change settings in a project.

10.1.9 Custom BMI Common Properties

· NLS support (new)
· General Property PG2 Faceplate ValueBackAppearance added
· General Property PG2 Faceplate EnableInputAppearance added

10.1.10 PID Tune and TuneRes

· New PG2 FacePlate Element for Tune and TuneRes
Member of Extension Library BMIStandardExt_PG2_FPL (open library)
· VB FacePlate element TunePG2 and TuneResPG2 moved to Extension Library
BMIStandardExt_Obsolete

10.1.11 MOTP Setpoint input enable in case of TrackMan = false

· EnableDEW = || !TrackMan added

10.1.12 BMIEnergy MOT1REF542Plus ComError indication

Due to wrong indication (Alarm unacknowledged) of a communication error the ComError
is replaced by ABB_REF542Plus_IntCtrl:ComErrTr.

10.1.13 GROUP Object General Properties BMI Group

Library Member moved from BMIStandard to BMIStandardExt_OpenAspects to be able to
change the settings in a project.

10.1.14 MOTx, VLVx Object ConsumerExt1

Library Member moved from BMIStandard to BMIStandardExt_OpenAspects to be able to
change settings in a project.

10.1.15 CircuitBreaker Object ConsumerExt1

Library Member moved from BMIEnergy to BMIEnergyExt_OpenAspects to be able to
change settings in a project.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 68
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

10.2 Corrected Errors

10.2.1 Control Module error correction summary

· MOTx, VLVx: corrected IO.Out.Auto condition so PCC PrevDrive interlock does reset
MOT1 from Auto to Manual mode
· MOTx, VLVx: corrected output condition for timers to also work with if delay time = 0s
· MOTx, VLVx: corrected eventing of stop reasons (FSP, QSP, SSP, CSP) if consumer
was not active
· MOTx, VLVx, GrpCycleCtrl: corrected Stw.Reset condition in Seq so it is not reset if
drive is not preselected but started (IO.In.SeqStart)
· MOTP_LCB: corrected condition for LCBLink.FieldStop if LcbInchingMode = true to
also get Local Stop if LcbStop is pressed
· MOTP: if MOTP is reaching LSW during active then use PosX/PosY as event
message instead of Off
· MOTP: both LSW active shall be an alarm when occured during MOTP was active,
only warning if MOTP was not active
· MOTP: eventing for ErrPos added if both LSW are lost or both active and MOTP not
active
· VLVNO: corrected M4 alarm to be active if LcbOpn=false instead of LcbCls=false
· GROUP: Changed ActualStep initializing. DirChange of MOT2 was bugged with
StartStep 1 and StopStep 200x.
· PCC_Threshold_AND3: Corrected AutoStart behavior to function as AND instead of
OR
· Prebin: If EnWhileGrpRun = false then Presel could not be deselected at all
· AIS: corrected condition for IO.SigErr.Value otherwise if cBMI.AIS.UncertainAsGood =
false then no signal error was generated
· GrpCycleCtrl: replaced IO.In.PreSel with PreSelected to correctly use parametrized
Prebins
· MNSiS_MBTCP_Comm: set “Instantiate as Aspect Object” as default for all modules
· MNSiS_MBTCP_Comm: Changed cBMI.MNSiS_MBTCP.WDT.MLinkWDTime default
to 5s
· MOTx_MNSiS_MBTCP: changed signal error handling of Current, Power and Thermal
so it works during simulation if AIS is connected
· MOTx_MNSiS_MBTCP: Time to trip exception handling for Feeders
· MOTx_MNSiS_MBTCP: LCB_Type exposed as Parameter for higher application
flexibility

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 69
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

10.2.2 PCC Viewer

· PCC_Threshold_AND3
o removed "-" in description text if not needed
o main condition text now always shows "not OK" instead of depending on IntlkTr
parameter
o corrected: if custom string is used for CondName and no SubCondTxt was set,
then the CondName was not used in PCCViewer
· Signal Error state now showing correctly
· Fixed bug when only ThresholdAND3 and PCCConnects are used but no signal direct
connected -> wrong presentation
· Minimize only when opened in own window, not as preview in PPA (caused PPA to
minimize after 5..10s)
· Fixed bug: PCC Viewer may hang in case PCC upload was not executed after
deleting objects or changing type of an object.

10.2.3 Group Status Viewer

· Minimize only when opened in own window, not as preview in PPA (caused PPA to
minimize after 5..10s)

10.2.4 Preselection Button

· Missing contrast check for symbol indication implemented

10.2.5 Faceplate Button configuration

· Object MOTP, position of the Button “Manual Mode” on extended view corrected
according to faceplate view

10.2.6 Number of Digits

· NumberOfDigits presentation corrected for all Analog and Unit presentatios
o AIS, AIC (AixandUnit)
o AOS, AOC (AoxandUnit)
o MOT1, MOT1_VVVF, MOT2, GROUP (RunTimeCnt, StartCnt)
o PulseCount (ShiftandUnit, TotalandUnit)
o ReportingCount (ReportCountandUnit, ShiftandUnit, TotalandUnit)

10.2.7 MOTP M3 not visible in Summary (BaseControl FacePlate)

M3 status implemented in BaseControl

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 70
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

10.2.8 SV5.1 Trend Indication missing in case of no Log Configuration created

The missing trend indication in SV5.1 is related to Time Span.
The init part for the FacePlate Trend in 5.1 is different to 5.0.
An additional trigger (Property writer) is implemented in this release witch works in 5.0 and
5.1 to show the trend correctly.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 71
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11. List of Changes for 5.1/3b

11.1 New Features and Functions

11.1.1 CmdButton, Button Background color

Library BMI_GraphiXs
Graphic Toolbox Type Basic Digital Symbols
Object BMI_CmdButton
Aspect CmdButton

· New Customized Button Background color according status ON / OFF.

New Expressions:
e_FillColorButton=
if EnableLogicalColor then
BMIngBGButtonFillColor
else if Status then
ButtonColorOn
else
ButtonColorOff

Modified Expressions:
e_FillColorOff, e_FillColorOn, e_LineColorOff, e_LineColorOn =
if EnableLogicalColor then
if SelectColorSettings = 1 then
:
else
FillColorOff (FillColorOn / LineColorOff / LineColorOn)

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 72
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

New Input Properties:

Input Property Default Value
EnableLogicalColor True
ButtonColorOff BMIngBGButtonFillColor
ButtonColorOn BMIngBGButtonFillColor
FillColorOff BMIngFillColorIndCat01Off
FillColorOn BMIngFillColorIndCat01On
LineColorOff BMIngLineColorIndCat01Off
LineColorOn BMIngLineColorIndCat01On
Orientation 0

· Orientation
o Connected to 03_StatusInd:Orientation

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 73
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.2 DigitalCmdButtonCore, Button Background color

Library BMI_GraphiXs
Graphic Toolbox Type Core Elements
Object BMI_DigitalCmdButtonCore
Aspect DigitalCmdButtonCore

· New Customized Button Background color according status ON / OFF.

New Expression:
e_FillColorButton=
if EnableLogicalColor then
BMIngBGButtonFillColor
else if Status then
ButtonColorOn
else
ButtonColorOff

New Input Properties:

Input Property Default Value
EnableLogicalColor True
ButtonColorOff BMIngBGButtonFillColor
ButtonColorOn BMIngBGButtonFillColor
FillColorOff BMIngFillColorIndCat01Off
FillColorOn BMIngFillColorIndCat01On
LineColorOff BMIngLineColorIndCat01Off
LineColorOn BMIngLineColorIndCat01On
Orientation 0

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 74
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.3 DigitalCmdButtonCore, Button Background color

Library BMI_Standard
Object DOC / DOS
Aspect DOCButton / DOSButton

New Input Properties:

Input Property Default Value
EnableLogicalColor True
ButtonColorOff BMIngBGButtonFillColor
ButtonColorOn BMIngBGButtonFillColor
FillColorOff BMIngFillColorIndCat01Off
FillColorOn BMIngFillColorIndCat01On
LineColorOff BMIngLineColorIndCat01Off
LineColorOn BMIngLineColorIndCat01On
Orientation 0

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 75
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.4 SwitchCore, new Generic Element

New Generic Element
Library BMI_GraphiXs
Graphic Toolbox Type Core Elements
Object BMI_SwitchCore
Aspect SwitchCore

11.1.5

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 76
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.5 DriveCmdButtonCore, new Generic Element

New Generic Element
Library BMI_GraphiXs
Graphic Toolbox Type Core Elements
Object BMI_DriveCmdButtonCore
Aspect DriveCmdButtonCore

11.1.6 MOTPButton, new Generic Element

New Graphic Element
Library BMI_Standard
Object MOTP
Aspect MOTPButton

11.1.7 GroupCmnd, new Generic Element

New Graphic Element
Library BMI_Standard
Object GROUP
Aspect GroupCmnd

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 77
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.8 General Property, EnableAbnormalModeInd

Library BMI_GraphiXs_Customization
Object BMI Common Properties
Aspect BMI NG Common

Drive Properties Default Value

EnableAbnormalModeInd False

11.1.9 ModeInd, Default Mode

Library BMI_GraphiXs
Graphic Toolbox Type Basic Drive Symbols
Object BMI_ModeInd
Aspect ModeInd

· New Properties for Default Mode

Input Property Default Value
EnableModeInt False
EnableModeManual False
ModeInt False
ModeManual False

11.1.10 DriveCore, Default Mode

Library BMI_GraphiXs
Graphic Toolbox Type Core Elements
Object BMI_DriveCore
Aspect DriveCore

· New Properties for Default Mode

Input Property Default Value
ModeManual False
EnableModeManualLabel False

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 78
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.11 MOT1, Default Mode

Library BMI_Standard
Object MOT1
Aspect MOT1

· Modified Expression:
Property Expression
EnableModeAutoLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then !EnAuto
else EnableModeAutoLabel
EnableModeManualLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then EnAuto
else False
ModeManual $'01_PCCDecoder.Mode_Manual'

11.1.12 MOT2, Default Mode

Library BMI_Standard
Object MOT2
Aspect MOT2

· Modified Expression:
Property Expression
EnableModeAutoLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then !EnAuto
else EnableModeAutoLabel
EnableModeManualLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then EnAuto
else False
ModeManual $'01_PCCDecoder.Mode_Manual'

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 79
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.13 MOT1_VVVF, Default Mode

Library BMI_Standard
Object MOT1_VVVF
Aspect MOT1_VVVF

· Modified Expression:
Property Expression
EnableModeAutoLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then !EnAuto
else EnableModeAutoLabel
EnableModeExtLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then !EnSPExt
else EnableModeAutoLabel
EnableModeIntLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then EnSPExt
else False
EnableModeManualLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then EnAuto
else False
ModeAuto $'01_PCCDecoder.Mode_Auto' || EnSPExt &&
$'01_PCCDecoder.Mode_AutSPExt'
ModeInternal !($'01_PCCDecoder.Mode_ManSPExt' ||
$'01_PCCDecoder.Mode_AutSPExt')
ModeManual $'01_PCCDecoder.Mode_Manual' ||
EnSPExt && $'01_PCCDecoder.Mode_ManSPExt'

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 80
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.14 MOTP, Default Mode

Library BMI_Standard
Object MOTP
Aspect MOTP

· Modified Expression:
Property Expression
EnableModeAutoLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then !EnAuto || EnE1
else EnableModeAutoLabel
EnableModeExtLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then !EnE1
else EnableModeAutoLabel
EnableModeManualLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then EnAuto || EnE1
else False
ModeManual $'01_PCCDecoder.Mode_Manual'

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 81
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.1.15 VLV1, Default Mode

Library BMI_Standard
Object VLV1
Aspect VLV1

· Modified Expression:
Property Expression
EnableModeAutoLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then !EnAuto
else EnableModeAutoLabel
EnableModeManualLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then EnAuto
else False
ModeManual $'01_PCCDecoder.Mode_Manual'

11.1.16 VLVNO1, Default Mode

Library BMI_Standard
Object VLVNO1
Aspect VLVNO1

· Modified Expression:
Property Expression
EnableModeAutoLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then !EnAuto
else EnableModeAutoLabel
EnableModeManualLabel If $'Common.Drive Properties.EnableAbnormalModeInd
then EnAuto
else False
ModeManual $'01_PCCDecoder.Mode_Manual'

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 82
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.2 Corrected Errors

11.2.1 DISTxt, DICTxt, Input Property Dynamicity = Dynamic

Library BMI_Standard
Object DIS, DIC
Aspect DISTxt, DICTxt

· Properties defined as InitOnly cannot be connected to an OPC Item.

Property Dynamicity
TextIndAbnormalPos InitOnly changed to Dynamic
TextIndNormalPos InitOnly changed to Dynamic

11.2.2 DOSTxt, DOCTxt, Input Property Dynamicity = Dynamic

Library BMI_Standard
Object DOS, DOC
Aspect DOSTxt, DOCTxt

· Properties defined as InitOnly cannot be connected to an OPC Item.

Property Dynamicity
TextIndAbnormalPos InitOnly changed to Dynamic
TextIndNormalPos InitOnly changed to Dynamic

11.2.3 DOSButton, DOCButton, Input Property Dynamicity = Dynamic

Library BMI_Standard
Object DOS, DOC
Aspect DOSButton, DOCButton

· Properties defined as InitOnly cannot be connected to an OPC Item.

Property Dynamicity
Text InitOnly changed to Dynamic

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 83
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.2.4 DigitalCmdButtonCore, Property Height and Width = 0.

Library BMI_GraphiXs
Graphic Toolbox Type Core Elements
Object BMI_DigitalCmdButtonCore
Aspect DigitalCmdButtonCore

Related Graphic Item: 04_SetOriginalModeTimer

· Expression modified in Property Height, Width
Property Value
Height 32 changed to 0
Width 32 changed to 0

11.2.5 EnableDirectEntry && IsInputEnabled()

Library BMI_Standard
Object AOS, AOC, PIDCtrl, MOT1_VVVF
Aspect AOxandUnit, PIDCtrl, MOT1_VVVFCtrl

· Modification in Property EnableDirectEntry: added IsInputEnabled() to.

Object Type Aspect Property Value
AOS AOSandUnit EnableDirectEntry && IsInputEnabled()
AOC AOCandUnit EnableDirectEntry && IsInputEnabled()
PIDCtrl PIDCtrl EnableDirectEntry && IsInputEnabled()
MOT1_VVVF MOT1_VVVFCtrl EnableDirectEntry && IsInputEnabled()

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 84
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.2.6 Button, Enable && !StatusQualityBad

Library BMI_GraphiXs
Graphic Toolbox Type Standard Symbols
Object BMI_Button
Aspect Button

· Additional link with Enable.

New Expression:
e_Enable = Enable && !StatusQualityBad

Modification in Expression:
e_TextColor =
if StatusQualityBad then
DarkGray
else if !e_Enable then
Darken(e_FillColor, 50.)
else
HighestContrast(e_FillColor, ip::TextColor)

Modification in Property:
03_DisableTextShadow:Visible = !e_ Enable
Property Value
Enable && !StatusQualityBad

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 85
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

11.2.7 AspectLinkCore, EnableColorBar

Library BMI_GraphiXs
Graphic Toolbox Type Core Elements
Object BMI_AspectLinkCore
Aspect AspectLinkCore

Modification in EnableColorBar:
BMIngEnableColorBarAspectLink#A > 0 && EnableColorBar
BMIngEnableColorBarAspectLink#R > 0 && EnableColorBar

11.2.8 FacePlate extended Info e_ViewReference02

Library BMI_Standard
Object MOT1, MOT1_VVVF, MOT2, MOTP, VLV, VLVNO
Aspect BaseControl

· Modification in Expression e_ViewReference02: “Reduced” replaced by “”:

Object Type Aspect Expression Value
MOT1 BaseControl e_ViewReference02 if ExtendedInfo[6] then
MOT1_VVVF LateBoundViewRef("./[
MOT2 UP]/*", "Faceplate", "",
MOTP True) else null
VLV
VLVNO

11.2.9 DOSButton, DOCButton TextNLS

Library BMI_Standard
Object DOS
Aspect DOSButton

· Modification in Expression TextNLS ($’.:Control Builder Name:Description'):

Object Type Aspect Property Value
DOS DOSButton TextNLS .:Name:Description

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 86
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

12. List of Changes for 5.1/4

12.1 New Features and Functions

12.1.1 CBM Diagrams

BMIStandard and BMIEnergy Blocks have been updated to be used in the new Diagram
Editor as supplied with 800xA SV 5.1 Feature Pack 4.

While the Library can still be used together with custom Data Types and Single Control
Modules, the new Diagram Editor is strongly recommended to be used in all new Projects.

12.1.2 Additional PCC Interlock Direction configuration possibilities

§ IntlkDir supports a new “Fast” configuration Option (in combination e.g.
“DirXYFast”) for the DIS Control Module, that allows to stop a Consumer via the
“Fast” Task (usually 50 ms)
§ IntlkDir supports a new “NoAck” configuration Option (in combination, e.g.
“DirXYNoAck”) which interlocks only as long as the condition is active (i.e. with
“Value” instead of “Normal”), to allow operation even in case the alarm is not
acknowledged.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 87
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ IntlkDir supports new «FBXY», «FBX», «FBY» configuration Options to connect a

signal as dynamic feedback (similar to FB1 in MOT1). IO.Out.RunXY or MOTP
PosX/Y will only become active if the condition is fulfilled. (e.g. additional final limit
switches for MOTP, speed-, press-, flow-switch with advantage of pre warning,
alarm and ready delay). This Option only makes sense together with
IntlkStartInhibitTime > 0s.

12.1.3 New MOT2_VVVF Control Module

MOT2_VVVF is a new Control Module that combines the MOT2 features with the
possibility to control a Setpoint for e.g. a Variable Speed Drive.

12.1.4 New DriveGroup Control Module

Technological group that can handle auxiliary equipment and main (variable speed) drives
of complex equipment like large belt conveyor systems and other machines with several
auxiliaries and main drives as one “drive”. It can be seen as a Group with two “sub”
groups for the Auxiliary Drives and the Main Drive(s) respectively.
· Auxiliaries will start before main drive(s) – possibility to start the Auxiliaries already at
the start of the Main Group (without StartStep)
· Main Drives can stop without auxiliaries – configurable Delay Time for stopping the
auxiliaries and possibility to not delay the Main Group Stop with the auxiliaries by
stopping independent of the Main Group
· Aux and main drives support (separate) pre-selection and stand-by pre-selection
· Set-point and limits control from DriveGroup to drives, for MOT1_VVVF or
MOT2_VVVF

12.1.5 New PCC and GCC_Com Control Modules

New Control Modules to extend the PCC and GCC Bus between different Diagrams,
Applications and Controllers.
· GCC_Com_M
o Converts from the GrpDrvBus (GCC) to Communication Variable, connected
to a GROUP and communicating with a GCC_Com_S Control Module in
another Diagram.
o Communication error and parameterized error action
· GCC_Com_S
o Converts from a Communication Variable to the GrpDrvBus (GCC) Variable,
connected to Consumer Objects and communicating with a GCC_Com_M
Control Module in another Diagram.
· PCC_Com_Drive
o Converts from a Communication Variable to PCC, connected to a Consumer
Object and communicating with a PCC_Com_Signal Control Module in
another Diagram.
o Communication error and parameterized error action
· PCC_Com_Signal
o Converts from PCC to a Communication Variable, connected to Signals (Basic
Objects) and communicating with a PCC_Com_Drive Control Module in
another Diagram.

12.1.6 Speed Supervision for MOT1_VVVF and MOT2_VVVF

New FB3 alarm for «Run» and «Off» speed supervision:

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 88
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

· 1 alarm as FB3, used for speed supervision after startup or stopping and configurable
as alarm/warning via FB3Mode Parameter
· 2 parameter as FB3RunSpeedLim and FB3RunSpeedTime, available in CM and FPL
to configure condition for speed supervision during starting and after.
· FB3RunSpeedLim must be fulfilled in FB3RunSpeedTime to release IO.Out.Run
(similar to FB1/2).
· 2 parameter as FB3OffSpeedLim and FB3OffSpeedTime, available in CM and FPL to
configure condition for speed supervision after stopping.
· Configurable feedback to group with respect to off speed supervision

12.1.7 New Mode 5 “Smart Reset” for PulseCount / ReportingCount

The Counters do have an additional Counter Mode 5 that is similar to the existing Mode 4
(“Accumulative Counter”), but does support up/down counting. See the Manual Reporting
Objects for details.

12.1.8 New Workplace with Tab-Navigation

New BMI Operator Workplaces are provided which make use of Tab-Navigation and have
a combined Display / Application Bar

12.1.9 Search Tool

The Search Tool now supports to search objects in multiple systems.
Additional pre-defined Search Tool Filters for NLS Alarm Texts have been provided.

12.1.10 Write Properties for the Faceplate

Additional check for Write access granted.
If Value in target is equal to the value to write then nothing is written to the target.
The WriteSequence for the properties is “Async”.
This additional function takes care for entries in the “Operator Message List” as well as
problems during opening an faceplate if the Aspect system is in Read Only mode.
Related Core Elements:
· BMI_EnergySwitchGearCore
· BMI_DriveCore
· BMI_DigitalCore
· BMI_DigitalTextCore
· BMI_AnalogBarCore
· BMI_AnalogValueCore

12.1.11 BMI Default configuration

· Drive Properties, “EnableRunColor” is now included in the default settings.

12.1.12 Operator Note

The Operator Note indication is available in the following Generic Elements Core:
· BMI_AnalogValueCore
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 89
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

· BMI_DigitalCore
· BMI_GroupCore
· BMI_GroupCycleCore
· BMI_PIDCore
· BMI_DigitalPreSelCore
The Operator Note is configured in the following Graphical available in the following Core
Graphical Elements:
· AIx: AIxandUnit
· AOx: AOxandUnit
· DIx: DIx
· DOx: DOx
· GROUP: Group01
· GrpCycleCtrl: GrpCycleCtrl, GrpCycleCtrl_Info
· PIDCtrl: PIDCtrl
· MOTP: MOTPCtrl
· MOT1_VVVF: MOT1_VVVFCtrl1

12.1.13 VLV1 and VLVNO1 new FBErrorModes

Additional Configuration for the Limit Switch Error behaviour is possible via the following
Bits in FBErrorMode Parameter that can be combined:
16#4 Keep OrdOpn in Limit Switch Error
16#8 Keep OrdCls in Limit Switch Error
16#10 Keep RFS with FBOpn Error
16#20 Keep RFS with FBCls Error
16#40 Simulate Opn Position with OrdOpn after FBTime
16#80 Simulate Cls Position with OrdCls after FBTime
The existing Mode FBErrorMode=2 is similar to 16#4 for VLV1, resp. 16#8 for VLVNO1,
FBErrorMode=1 is similar to 16#F4 resp. 16#F8, with the difference that the new Simulate
Option does include the FBTime, which is important if Parameter CutOrd = true.

12.1.14 REF542PlusCircuitBreaker
The Energy Counter now uses the new CountMode 5 to correctly count negative Energy
(Current in other direction), used for e.g. Buscoupler Protection Relays.
All AIC Blocks (Voltage, Current and Power) are now correctly indicating Signal Error in
case the Modbus Connection is lost.

12.1.15 New Control Module GroupStep

GroupStep is located in BMIStandard Library and replaces the StepOneGroup Function
Block for Diagram logic (see Discontinued Functions).

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 90
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

12.1.16 New Control Module PCC_Intlk

New Single Boolean State configurable PCC Interlock with the following Features:
· Contains the PCC Parent and Child Object, can be used to Group Signals via PCC
and forward as a single condition to another Parent.
· Interlock Blocking, Delay and Ready Delay
· Faceplate and PCC Viewer

12.1.17 New SPIntPar Parameter for MOTx_VVVF, DriveGroup

The Setpoint and Setpoint Limits Variables (Interaction Parameters, Values shown and
written from FPL) are moved to a new Parameter SPIntPar defined on the Control
Modules and possible to connect into the Application. This makes it possible to “distribute”
Setpoint Values from Master-Slave Drives combination between the different Faceplates
for correct indication on the Operator Station.
For connecting SPIntPar of different Motors together (Master – Slave type of Motor
Control), there must be a “move” Block used in between, which requires the declaration of
an additional Variable for SPIntPar for each Control Module, and the new
ExternalSPIntPar Parameter on the Slave Blocks needs to be set to “true”. This will also
disable the Setpoint Input on the Slaves.

12.1.18 New AutoMode Parameter for Consumers (MOT1/2,_VVVF,VLVx)

A new Parameter “AutoMode” is added for MOT1, MOT1_VVVF, MOT2, MOT2_VVVF,
VLV1 and VLVNO1 to specify the behaviour in Auto Mode (EnAuto = true).
· 1: the IA_Process PCC Interlock and IO.In.IA will be disabled during Manual Mode
(Consumer will not stop)
· 8: Wait for the next Auto_Start on PCC before starting the Consumer when
switching to Auto-Mode. Note that this Option does only make sense with PCC
Interlocks and must not be used with Auto Mode started via IO.In.IA.

12.1.19 Alarm Lists use Event Time instead of Active Time

All “BMI” Alarm List configurations are changed to show Event Time instead of Active
Time.

12.1.20 New Tab-based BMI Workplace

A new Workplace is provided together with the Library, that uses the tab-based navigation
and a combined Application and Display Bar. This Workplace replaces all older
Workplaces in the standard installation.

12.2 Corrected Errors

12.2.1 GroupStep (and StepOneGroup / StepTwoGroup)

When DrivePCC was connected to a Consumer that didn’t have any Error Indication, the
RFS state was not forwarded to the Group even in case it was false, this has been
corrected.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 91
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

12.2.2 Consumer Objects

The IndTr from PCC is not forwarded to the Object’s Indication anymore in case the only
active PCC Interlocks are of Dir..Start and the Consumer is in running State (Interlock not
active), similar to the already existing exception for RFS Interlocks
Starting a Consumer with EnAuto set now checks for POC=Seq as well, so the Group
(with SetSeqMode=2) will correctly wait in the Active Step until the POC is changed
Add ALP4_SubTxt to the Tagname for the GroupDriveBus PCC AEInd same as for other
Indication Treatments
IO.In.Warning is now included in the AlarmSumIndTr, this means the Warning state will
now be correctly shown in the Graphic Display and transferred to the Group.

12.2.3 Alarm Color over PCC not correctly transferred for SigErr
The AlarmColor was not correctly shown on Consumers in case the BasicObject had a
SignalError or AlarmTr was set to 4. This has been corrected.

12.2.4 VLV1 and VLVNO1

The Alarm Color in Cls Position (Opn for VLVNO1) was in some cases reduced to purple,
even if cBMI.StdType was set to 0. This has been corrected.

12.2.5 MOT1_VVVF Inc/Dec if EnableFBFieldMode = false

If the Project Constant cBMI.MOT1_VVVF.EnableFBFieldMode was set to false, it was
not possible to change the Speed Setpoint via LcbInc / LcbDec anymore in case the FB1
or FB2 Signal was false.

12.2.6 GROUP
IOOut.Rfs now requires IOIn.IC to be true. The Start Button in FPL is now disabled if any
Interlock is active.

12.2.7 „Block“ indication forwarding over PCC

The Block indication is now correctly forwarded from the Basic Objects tot he Consumer
via PCC Connection. The Drive will indicate Block if any of it’s connected Signals are
Blocked.

12.2.8 Group Status Viewer

The Start and Stop Steps for MOTP GrpAutoStep and VLV1 GrpOpnStep are now
correctly shown in GroupStatusViewer.

12.2.9 ConsumerExt01
When opening the Extended Status Viewer (ConsumerExt01) it sometimes didn’t update
the OPC Data, showing “Table empty” until any Data change or User interaction
happened. This has been corrected.

12.2.10 Energy CB Aspect

Related Library:
· BMIEnergy
When CB is not inserted but closed the voltage color is not transferred anymore.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 92
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

The Line thickness is configurable with general Properties.

CB Properties
· LineThickness1SymbolSize (Default = 6)
· LineThickness1 (Default = 0.75)
· LineThickness2SymbolSize (Default = 26)
· LineThickness2 (Default = 1.0)
· LineThickness3SymbolSize (Default = 50)
· LineThickness3 (Default = 2.0)
· LineThickness4 (Default = 3.0)

12.2.11 Minerals License Service for 64Bit Windows

The Minerals License Service now works with 64 Bit Windows Installations (Patch for 5.1-
3a)

12.2.12 PCCUploader / GroupUploader

The Upload process now also deletes all XML Config Aspects that should be empty, e.g. if
a Consumer does not have any PCC Signals connected.
Corrected Definition for PCC_Threshold_AND3 to upload as Child - this corrects the PCC
Viewer Indication in cases were other PCC Blocks (e.g. PCC_Threshold_AND3) are
connected as Condition to PCC_Threshold_AND3.

12.3 Discontinued Functions

12.3.1 StepOneGroup / StepTwoGroup

In Control Builder Diagrams, the two Function Blocks StepOneGroup and StepTwoGroup
are not supported anymore. They will be kept for existing Projects based on Single
Control Modules. Applications written with Diagrams should always use the new
“GroupStep” Control Module which is a direct Replacement for the StepOneGroup. Please
see the Group Objects Manual on how to replace a StepTwoGroup with two “GroupStep”
Control Modules.

13. List of Changes for 5.1/4a

13.1 New Features

13.1.1 IO Status Indication Color for Consumer Objects and DIS

Via new Project Constants cBMI.MOT.IOS_useSigErrTr resp. cBMI.VLV.IOS_useSigErrTr
it is possible to change the Indication of the IO Status Error on the Consumer Objects to
cBMI.AE.SigErrTr instead of the AlarmTr configured. The IOStatus will in this case
indicate with Yellow Color and with higher Priority than other Alarms and Interlocks.
For the DIS, it is now as well possible to indicate the SigError in the Process Graphics
(e.g. on DISTxt) by setting the Project Constant cBMI.DIS.ShowSigErrIndTr.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 93
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

13.1.2 New EnExtAlarm Parameter for AIC

With the EnExtAlarm Parameter set to cBMI.AIC.EnExtAlarm.AllLevels, the Limit
Calculation for the AIC can be disabled and the Values of the Alarms (e.g. IO.H1.Value for
the High 1 Alarm Limit) need to be written from the glue logic instead to indicate on the
Graphics and generate the Alarm. This can be useful for Sub-Control Systems were the
Values and Alarms are evaluated in another PLC and transmitted to the DCS. In this case,
the Alarm Limits and Block (Limit Enable) are set automatically when an Alarm is coming
up. To disable this behaviour the Parameter “EnExtLimits” can be set to true, e.g. if the
Limit Value is fixed or transmitted from the other System as well.

13.1.3 Consumer Object keeps in Auto Mode during Interlock or Trip

It is now possible via Parameter AutoMode to configure the Consumer Object to keep in
Auto Mode if any Trip or Interlock occurs. This can make sense for Equipment that shall
by default stay in Auto Mode and is independent of any Group Sequence. The Interface to
the Group is not changed however, so a Group will still indicate Hold or wait on the Start
Step for a tripped or Interlocked Consumer independent if the Consumer is still in Auto
Mode or not.

13.1.4 CircuitBreaker Graphic ANSI Mode and Intermediate/Fault Position

The CircuitBreaker Graphic Core has been extended to show Intermediate and Fault
Positions for Disconnectors and Circuit Breaker if two Limit Switches are connected. Also
it can now be switched to show indications resembling the ANSI Standard Breaker and
Disconnector Symbols. The latter can be applied for the Graphic Elements in BMIEnergy
Library using the new General Property “CB Properties.EnableANSI” on BMI NG
Common.

13.1.5 new IO.Out.FdBckOffErr Output for MOTx

The MOT1, MOT2, MOT1_VVVF and MOT2_VVVF Control Modules do have a new
FdBckOffErr Output that indicates an active Contactor Off Alarm. This signal could be
used to switch off the next upstream Breaker (e.g. MCC Incomer) via glue logic.

13.1.6 Jog LcbTypes for DriveGroup

LcbTypes 9,10 and 11 have been added for the Drivegroup, with function similar to the
LcbTypes present on Consumer Objects already.

13.1.7 Events for Consumer Objects now on IO.Out.Run change

In previous Versions, the State Event was delayed until FdBckRun went to false. This has
been changed to Event already.on IO.Out.Ord going false. It is now as well possible to
configure a “starting” event on the MOTx Objects via Project Constant.

13.1.8 New DriveGroup AuxStopCtrl and InterlockCtrl Options

The DriveGroup can now be configured to stop only the Main Drives on Group Stop. The
Auxiliaries will keep running and can only be stopped from the Faceplate or LCB.
A new Parameter InterlockCtrl can be used to change the default behaviour to do a
Sequence Stop of the DriveGroup and instead apply a Sequence Interlock on all
Consumer Objects in MainGrpDrvCon. This can be used to connect Equipment Interlocks
like Belt Drift Switches to the DriveGroup instead of all the MainDrives to apply the correct
POC and LocalStartOverride Action while keeping the immediate Stop Action on a Trip.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 94
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

13.1.9 Behaviour of DriveGroup with no Members

A DriveGroup with no selected Members now keeps the running Status until the Actual
Step from the superior Group is started, in order to continue with the next start step, only
then it will switch to GrpOff.

13.1.10 ProcessPanel support for DriveGroup

DriveGroup now supports the ProcessPanel Interface on the MainGroupDrvCon Variable
– with the same Interface as for the Group Control Module.

13.2 Corrected Errors

13.2.1 GraphiXs Aspect Link

On Display callup, the AspectLinkCore sometimes indicated QualityBad even if the Link
itself was working. This has been corrected.

13.2.2 Group Start Delay for consecutive Steps

If a Group Member with multiple Steps (e.g. PIDCtrl) had its Steps executed immediately
after each other, the Step Delay was only executed for the first Step. This means e.g. for a
PIDCtrl with Step 1 switching to Auto and Step 2 switching to Manual, the Block switched
to Manual immediately after reaching Auto Mode, independent of the configured Delay for
Step 2, if there were no steps of other Consumers executed in between.

13.2.3 Extended Info Links on PG2 Faceplates with NLS

If 800xA Language Packs were installed, some of the Aspect Links in the Faceplate
Extended Info Area were not working.because the related Aspect Names were translated.
The Links are now corrected by using NLS References defining the Aspect Names.

13.2.4 AIS/DIS Faceplate PCC Local Start Override

The Interlock Local Start Override Indication has been changed to only show yellow
Background if the Interlocks are currently overridden.

13.2.5 Small Corrections

Corrected IndTr for IO.In.Warning on MOTx CMs in cBMI.StdType = 1
PulseCounter Integrator Mode did not correctly sum the CountValue if the Tasktime
configured was not a divisor of 1000 ms.
GCC_Com_M was still keeping the Slave Diagrams Rfs State on the Last transmitted
Value in case of Communication Error even with ComErrCtrl set to 0.
GCC_Com_M is now checking for all Pulses on GrpDrvBus (e.g. Hold and AlarmAck) to
be transferred to the Slave Diagram by holding the Pulse until the PackedCount is
Start Warning for DriveGroup alarms is now only activated for auxiliary equipment if Main
Drives are not to be started (Aux Start only).
The Local Start Inhibit and Local Start Override Options for Signals connected to the
DriveGroup Block have been fixed.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 95
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

13.2.6 MOT1VVVFCtrl VB Graphic Element

The Element has been adapted to work with the new SPIntPar Parameter for the
MOT1_VVVF introduced in 5.1/4 – to keep the ActiveX Graphics basic functionality during
an Upgrade.

13.3 Discontinued Functions

VB Faceplates (for BMIStandard/Energy Libs) have been removed from the Distribution,
because they were not supported/activated anymore since 5.1/2a Version and there are
some errors in some of the Faceplates introduced by Library Changes.
Please also refer to the Upgrade Hints for how to disable the VB Graphic Elements for
Upgrades.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 96
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

14. List of Changes for 5.1/5

14.1 Licensing
The Minerals Library Release 5.1/5 now requires a License for “Minerals Control Libraries
6.0” or higher. Earlier Versions were delivered with a “Minerals Control Libraries 5.0”
License. For upgrades please contact [email protected] to get a new
License Version.

14.2 Yard and Port Objects

New Template Library for Reclaimer / Stacker with Graphic Elements and Collision
Avoidance Checking Logic. Separate Release as .afw File – please see the new Manual
“20 Minerals Library Yard and Port Objects” for a Description of the new Objects.

14.3 PCC Interlocks supported for GROUP

The GROUP Control Module now also supports PCC Interlocks similar to the Consumer
Objects.
The cBMI.GROUP.DisablePCCInterlocks Project Constant can be used to disable this
Feature for Upgrade Projects.

14.4 New SubGroup Control Module

A new SubGroup Control Module is included that has the same functionality as the Group
but can also be a Member of a superior “Master” Group. see the Group Objects Manual
for a complete Description.

14.5 New GroupConnect Blocks

New GroupConnect_2, GroupConnect_4 and GroupConnect_8 Control Modules that
allow to connect a Consumer to multiple Groups. These work similar to GroupSteps but
only require a single Connection to the controlled Consumer Object via the Group
Parameter. See the Group Objects Manual for a complete Description.

14.6 New RecipeControl Control Module

There is a new RecipeCtrl Control Module for controlling multiple Weighfeeder Setpoints
with a Total Feed Setpoint for e.g. a Mill Feed Control.
This Module replaces the obsolete WFC Block from the BMI_WeighfeederLib, with more
Features and full PG2 Graphics support. See the Dosing Objects Manual for a complete
Description.

14.7 New PCC_Connect_6 Block

A new Library “BMIAdvancedPCC” is included with Minerals Library and contains one new
Control Module “PCC_Connect_6” which is a replacement for the PCC_Connect Function
Block that also supports the forwarding of the Fast Interlock from the DIS.

14.8 New BMI Standards Configuration via Resource Backup Tool

The Tool allows to backup and restore the NLS Texts, Colors and BMI Common Settings.
Usage is described in
In Addition the Tool replaces the BMI Standards Configuration Display that was used in
earlier Versions to set the different Standards. These Standard Settings are now provided
in the C:\ABB Industrial IT Data\Minerals Library\ Folder in different Subfolders that can be
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 97
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

selected and loaded via the Resource Backup Tool. Details are described in the Minerals
Library Overview Manual.

14.9 New Support Control Modules

Some Control Modules that were found to be useful for Glue Logic in Control Builder
Diagrams have been added in the BMISupport Library.
SelAny has the same functionality as Sel but uses AnyType and therefore can be used
with all DataTypes. The User has to take care that only
SelRealIO is similar to SelAny but specially made for RealIO Variables to copy the Forced
Boolean in reverse Direction from the Out back to the In Ports. If Forced is true then the
Value is copied in reverse as well.
InjectRealIO is used to set the Parameters on a RealIO Connection in one Single Block.
This is sometimes needed to initialize the Parameters if the RealIO is not connected to a
Hardware Channel.

14.10 Improved Group Bus RFS and Step Feedback

The Local / Maintenance Steps are now shown in the same priority as the not RFS Steps,
and Consumers in Central Mode are now also indicated on the Group if SetSeqMode is
set to 2.
The cBMI.DriveGroup.NotRfsIfDriveInLocal Option is removed. This Option was only
working before is set together with the corresponding Option for the Group
cBMI.Group.NotRfsIfDriveInLocal, and it is now merged completely. In case the
Parameter SetSeqMode is set to 2 (not changing the POC from the Group) then the
Drives in Central are now indicated as Not Ready Reason for the Group as well. Together
with this, the Out Parameters “FirstStepInMaint” and “FirstStepInLoc” for the Group,
GrpCycleCtrl and DriveGroup are removed.
In case a Step hangs (motor has alarm or interlock active while the Start Pulse is sent
from the Group), the Group now immediately goes to Hold and triggers a Timeout Alarm
instead of waiting on the Step until the Sequence Timeout is reached. The Alarm
Message does include the Stepnumber on which the Group was active at the time of the
Error. The new Project Constant cBMI.Group.AlrOnTagActStepEmpty can be set to false
to disable this Feature and get the old behavior for upgrade Projects.

14.11 New Status_Override Parameters on PCC_Intlk

The PCC_Intlk Block now has additional Inputs IO.In.Status_Override,
IO.In.Status_WarningXEn, IO.In.Status_FailureXEn, IO.In.Status_WarningYEn and
IO.In.Status_FailureYEn to allow overwriting the PCC Status Information forwarded from
the Parent Object via PCC_Intlk to the Signals.
The Parameter StatusStarted has been replaced with 2 new Parameters Status_StartedX,
Status_StartedY to allow to define the Status direction dependent. In case
IO.In.Status_Override is set true, these Parameters will now also be used to overwrite the
Status to the Signals.

14.12 New LCB Type 12

A new Type 12 is introduced for an LCB with Remote/Local Selector Switch where the
Motor will indicate “Not Ready for Start” if the POC differs between the LCB and the
Faceplate. It is similar to the existing JOG Type 10 but also requires the LcbRem Signal
and Stops the Motor in case LcbLoc and LcbRem are both false (Selector “Off” Position).
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 98
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

14.13 Changed SigErr behavior for AIS/AIC and DIS

On an upcoming Signal Error, the AIS/AIC and DIS with ErrCtrl = true now still force the
Signal to ErrVal but it is now visible to the Operator that the Block was caused by the
Signal Error and will reset on “Good” Status of the Signal again. While the Signal Error is
activated, “ErrorControl” is now indicated in the Faceplate instead of “Block Input” and the
Block Button is still unchecked. The Supervisor (depending on Access Permission
Configuration) can then still click the Block Button to set the state to “Block Input” instead
and with this make sure that the Hardware Value is not applied again as soon as the
Signal is back to “Good” Status . A new Variable “ForcedBySigErr” was introduced for this
Feature.

14.14 Small Corrections & Additions

14.14.1 Start Inhibit Indication on DIS and AIS

An active StartInhibit (IntlkStartInhibit Parameter set to a Time > 0s with stopped PCC
Parent) is now indicated more clearly in the Faceplate with a yellow Label “Start Inhibit
Active” replacing the earlier “IO Alarm blocked” (DIS) or “Block” (AIS) Label. In case the
StartInhibit is not active (PCC Parent running) but a Limit is disabled via IO.AlarmEn /
IO.LimEn then the Label Text is still the same as before so it is now possible to
differentiate between these two conditions.

14.14.2 RemainTimeForStep forwarding on DriveGroup

The Remaining Time for the next Step is now forwarded by the DriveGroup to the superior
Group. This improves feedback on the Master Group as now it is possible to see the
currently active Time Delay until the next Step even for Steps programmed in Subgroups.

14.14.3 Trend Aspects on AIC/AIS

The Trend Aspects are now included in the Open Aspect Extension Library, so it is
possible to change the Trend Templates in the Object Type Structure already for a
specific System/Project.

14.14.4 New cBMI.AIC.PropagateSigErrToPCC

Added a new Project Constant to suppress the Signal Error forwarding to PCC similar to
the Option available for AIS already.

14.14.5 AIS StatusTr, New StatusTr Parameter on AIC

The StatusTr Parameter on AIS now also suppresses the Forced Event on forcing the
actual Value additionally to the Limits. The same function has been added to the AIC with
a new Parameter StatusTr.

14.14.6 PCC Interlock on DIS/DIC with ValTr = -1 and WarnValTr = -1

The Timers, AlarmCondition and PCC Interlocks are now executed on the DIS and DIC
Control Modules even when ValTr and WarnValTr Parameters are set smaller than 0 (no
Alarm or Event). This can be used in the special case where an Interlock shall not
generate an Event but still apply via PCC.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 99
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

14.14.7 Disable FastInterlock on DIS with IO.AlarmEn

Setting IO.AlarmEn to false will now also disable the FastInterlock on the DIS. The
IO.AlarmEn itself is only evaluated in the Normal Task and used to disable all Alarm and
Interlock of the DIS, but it was not supported for the FastInterlock in earlier Releases.

14.14.8 SeqPosX / Y on MOTP in AutoMode

A pulse on IO.In.SeqPosX or IO.In.SeqPosY does now set the MOTP to Manual Mode. In
earlier Versions it was required to first switch to Manual Mode in order to start the MOTP
to X or Y Position from the Application Program.

14.14.9 ProcessPanel
The ProcessPanel Connection on the DriveGroup now supports additional Commands
StartX, StartY, StartAux and StopMain, and additional Status Values for Indication of the
Auxiliary Running or Hold Status.
Changed the EnSPField Value for the ProcessPanel for MOT1_VVVF and MOT2_VVVF.
This Value was inverted before, true when it was actually not possible to write the Setpoint
(in IO.Out.SPExt). The Value has been corrected but this could mean that a ProcessPanel
configuration could need to be changed if it relies on the inverted (wrong) value of
EnSPField to allow the Setpoint Input.

14.14.10 Extended Info Area SearchPath Configuration

It is now possible to customize the Late Binding Search Path to locate the Aspects linked
from the Extended Info Area. Additional Properties have been added in the BMI Overlap
Link General Properties Aspect that contain the Search Path used to specify the Object on
which the Aspects are located. Please consult the PG2 Graphics Help Function on the
Late Binding Functions for a description and examples of Search Path Values.

14.14.11 PCCIntlk
Changed the PCCIntlk IO.Out.NoIntIx_Start behaviour to always be false if any
IO.Out.NoIntIx is active – in 5.1/4a and earlier, the Start Interlock was only indicated
(false) if no non-Start Interlock was active at the same time.
MOT2 / MOTP PCC Interlock Indication is now suppressed if only Interlocks in the non-
preselected or running Direction are active – similar to the Indication of the IO.In.IAX/Y
etc. directional Interlocks.

14.14.12 Simulation Value for AIS/AIC now considers the Limit Values
When Simulation Mode is set (on the corresponding GROUP), the Value on the AIS/AIC is
now set to be between all the Low and High Limit Values for the AIC/AIS. Earlier only the
RealIO Range Min/Max was used to set the Value which could still activate a Limit
depending on the configuration.

14.14.13 New Actuator and DISDelayTxt Graphic Elements

On the PIDCtrl, AOS and AOC Blocks there is a new Actuator Graphic Element to indicate
the Damper or Valve Position in the Process Graphics without the need for an additional
Control Module.
A new DIS/DICDelayTxt is added that indicates the remaining time between Warning and
Alarm Status in addition to the DISTxt indication.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 100
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

14.14.14 BMI_FaceplateTextCore
The EnableILArrow and the Property is removed and replaced by 14 individual Properties
for each IndTr.

14.14.15 BMI_ValueInputCore
This Graphical Element is mainly used in FacePlates.
Input Property “DateTimeFormatString” connected to FormatString Property on Time Dew.
In case of the “DateTimeFormatString” different to “ms”, the direct entry shows the same
format as defined by “DateTimeFormatString”.

14.14.16 Number of Digits in BaseControl for AIC / AIS / AOC / AOS

NumberOfDigits changed on AIC / AIS / AOC / AOS BaseControl from 4 to 6 to support
larger Values.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 101
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

15. List of Changes for 5.1/5a

15.1 New Minerals Library Viewers

The PCC Viewer, Group Status Viewer and Extended Info (ConsumerExt01) are replaced
with the new PCC Viewer, Group Step Viewer, Status Viewer and Extended Info Viewer
with this Release. Details about the new Viewers are provided in the relevant Manuals
(Consumer Objects, Group Objects resp. Wrapper Objects).
Together with the new Viewers, the PCC and Group Uploader are replaced with the
Functional Structure Uploader. The Content shown in the Viewers is now read from the
Functional Structure instead of the HTML View AC Aspects stored on the Objects.
The new Viewers require a License for “CertifiedSystemExtensions” – “OP_StatusViewer”.
New Licenses will include this Feature, for upgrades please contact
[email protected] to get this Feature added to your license.

15.2 Subgroup IO.Out.Rfs not including StartInterlock 1..4

The IO.In.StartInt1 to 4 Interlocks do not anymore set the IO.Out.Rfs to false for the
SubGroup. This means these Interlocks are now not transferred to the Master Group as
not Ready anymore and don’t inhibit a Master Group Start, similar to the Motors
“PrevDrive” Interlock.

15.3 Small Corrections

15.3.1 PCC_Threshold: Fallback to Tagname for empty Descriptions

If a PCC_Threshold_AND3 does have an empty Description (or Name Uploader was not
executed), the Tagname of the Function Block will now be shown instead in the Consumer
Faceplate while the Interlock is active.

15.3.2 Engineering Units shown in Event Text

For all Event Texts with Values (e.g. Analog Limits) the Unit is now added to the Value as
well.

15.3.3 Auto Mode switches IA IndTr

The IA Interlock (IO.In.IA) is now shown with white Color while in Auto Mode only
(independent of EnAuto Parameter).

15.3.4 Direct Group Timeout through GroupConnnect

The Group does now directly indicate Sequence Timeout if the Consumer that does not
allow the Group to Start (e.g. because of a still active RFS Interlock) is connected via a
GroupConnect_2, _4 or _8 Block.

15.3.5 GCC_Com_M and PCC_Com_Drive as Aspect Objects

The GCC_Com and PCC_Com Blocks now are enabled as Aspect Objects, in order to be
visible in the Status Viewer for improved Indication of Communication Errors.

15.3.6 DISTxt visible in case Blocked / MouseOver

The DISTxt will now be shown with a minimum Transparency (to be visible) in case the
Mouse is located over it or the “B” blocked Label is shown.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 102
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

15.3.7 DriveGroup GrpStopDelay ignored if MainDrvOff

The DriveGroup will now ignore the configured GrpStopDelay when stopping from the
Master Group if AuxStopCtrl = 1 and all Main Drives are off. That means the Master
Group will not wait on this step at all. This change was introduced in Patch 4 for Version
5.1/5 already.

15.3.8 STW restart on Group start with StwFirst = true

The Startwarning will now re-start the Total Time counting if the Start Permission is given
out and the PreWarn Time is already over, if the Group is started and its StwFirst is set.
The PreWarn Time will then be started again in this case, while Perm will be kept true.
This new behavior mainly solves the issue with the TotalTime being too short for the
DriveGroup starting Auxiliaries that are connected to the same STW already when starting
the Main Group.

15.3.9 Extended DEW

In case the extended DEW (Direct Entry Window) is enabled and the Standard DEW is
disabled, the extended DEW will now be called with the Left MouseButton automatically –
this would be the Standard Configuration for a Touch Screen.

15.4 Discontinued Functions

All VB related Aspects are obsolete and have been moved into Extension Libraries.
For the SV 5.1 Installer, these are still included but shall only be used for upgrade
purposes. For SV 6.0, VB based Aspects are not provided anymore.
NOTE: any Upgrade for VB Displays to PG2 is only supported on SV 5.1 Systems.
The Search Tool is removed from the Minerals Library Distribution.

16. List of Changes for 5.1/5b

16.1 New LCC and BMIAdvancedAnalog Library

This Datatype allows a one-line connection for Analog Control Loops, similar to the
ControlConnection available in AC800M Connect Standard Libraries. It enables integrated
Range forwarding, Backtracking and Operator Navigation between the Analog Control
Modules.
The Type is used in the new BMIAdvancedAnalog Library that contains the following 4
new Control Modules:
Actuator : Controls a Valve or Damper with Analog Setpoint and Position Feedback
PIDAdvCtrl: PID Loop Controller, similar to PIDCtrl with more advanced Control Options
RatioCtrl: Control Setpoint with Gain and Offset
SplitRange: Connect PIDCtrl with two Actuators in SplitRange Configuration
Parameters of LCC Type have been added to the following BMIStandard Library blocks as
well:
PIDCtrl: OUTCC, for connection to Actuator/MOTP
MOTP: E1Ref for External Setpoint Reference (in E1 Mode)
MOT1_VVVF, MOT2_VVVF: ExtSPRef for External Setpoint Reference (SPExt Mode)

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 103
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

The new Blocks are counted for the License Usage as well, each Actuator requires 5
Minerals License Points (MLP) same as e.g. MOTP, and each PIDAdvCtrl requires 4 MLP
same as the PIDCtrl.
Please refer the 03 Loop Objects and 04 Consumer Objects Manuals for a detailed
Description of the new functionality.

16.2 Small Changes & Corrections

16.2.1 SystemDefault (Applied) Action for AIS Limits Enable Checkbox

All the AIS / AIC Limits Enable Checkboxes in the Faceplate (e.g. H2 Enable) are now set
to “SystemDefault” for Apply Action, to have it matching all the other Buttons and
Checkboxes in Minerals Library Faceplates.

16.2.2 Active Alarms visible in Alarm Control

In the right-click menu on the Faceplate Alarm Control (Blinking Triangle shown in the
upper right edge), the number of active Alarms are now printed next to the Alarm List for
Information.

16.2.3 AISBar / AOSBar Limit color as Logical Color

Four new Logical Colors are added in BMI NG Symbol 2 Colors. BMIngThresholdBarFill
and BMIngThresholdBarLine, that define the Color of the Limit Indication (Line) on the
AISBar Graphic Element. BMIngBarLowerLimitFill and BMIngBarUpperLimitFill, that
define the Color of the fill (crosshatching) for the Limit Indication on the AOSBar Graphic
Element.

16.2.4 Extended DEW for RecipeCtrl

Extended Direct Entry Windows have been added for the RecipeCtrl Block Setpoint Entry.

16.2.5 Stop Step for MOT2 in GroupStepViewer

The Stop Step for MOT2 and MOT2_VVVF is now only shown in the GroupStepViewer for
execution while the object is running in the respective Direction, matching the actual
behavior of the object.

16.2.6 Updated Parameters for ACS8x0 Wrappers

The AutoMode, ExternalSPIntPar and SPExtRefX/Y Parameters are now available as
Parameters on the ACS8x0 Wrapper Object as well.

16.2.7 MOTP IO.Out.WSP follows E1Ref in Manual Mode if EnAuto = false

If EnAuto = false and EnE1 = true, the IO.Out.WSP Parameter now follows E1Ref even
while the MOTP is in Manual Mode. The old behavior was to only update IO.Out.WSP
while in E1 Mode and therefore the last active Setpoint was shown in the Faceplate in
Manual Mode even when Auto Mode was disabled (Parameter EnAuto = false).

16.2.8 MOTP IO.Out.NoIntX / NoIntY now includes the Group Sequence Interlock
The IO.Out.NoIntX / IO.Out.NoIntY Parameter did not change to “false” if only the
Sequence Interlock (via DriveGroup with InterlockCtrl Parameter set) was active. This has
been corrected.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 104
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

16.2.9 PCC_Intlk new EnExtIntlkDelay Parameter

On the PCC_Intlk Block, the “IntlkDelay” and “IntlkReadyDelay” Parameters can now be
used to set the Delay Times dynamically from Glue Logic by setting the new
EnExtIntlkDelay Parameter to true.

16.2.10 Keep in Quickstop from Group on Member DriveGroup / Subgroup

The DriveGroup (resp. Subgroup) controlled from a Master Group will now stay in
Quickstop as long as the Master Group is in Quickstop. In Earlier Version the DriveGroup
switched to Off as soon as all the Drives were stopped but this could lead to a hanging
Master Group if MOTP with GrpPosX2Step / GrpPosY2Step where connected to the
DriveGroup.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 105
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

17. Installation of Minerals Library 5.1/5b

Read the Upgrade Hints for 5.0/1, 5.0/2, 5.1/0, 5.1/1, 5.1/3, 5.1/3a, 5.1/4, 5.1/4a, 5.1/5,
5.1/5a and 5.1/5b depending from the version you start the upgrade. For Example, when
upgrading from 5.1/3a upgrade hints 5.1/4 to 5.1/5b must be followed.
Important: See Library Versions for compatibility with 800xA System Versions. Minerals
Library 5.1/5b requires 800xA System Version 5.1 with Feature Pack 4 or newer. For
System Version 6.0, a separate Installation Disc is available.
To install Minerals Library for AC800M, the AC800M Connect System Extension must be
installed first.

17.1 Node Types

Depending on the Node and System Version Type the following options are
recommended:

Node Type AC800 Log AC800 Legacy AC800 Visual License Control Builder
Config Libraries Basic Service Templates
Client yes(*) yes(*) yes(*) no no
Engineering Client yes(*) yes(*) yes(*) no yes
Main Aspect Server yes(*) yes(*) yes(*) yes no
The License Service should only be installed once for an Aspect System, usually on the Primary
Aspect Server.
(*)AC800 Log Config, Legacy Libraries and/or Visual Basic can be de-selected if they shall not be
imported into the Aspect System, to save space on the disk.

17.2 Pre-Upgrade Procedure

All the NLS Resource Aspect, the Logical Color Definitions and the General Properties are
overwritten during the Import of the System Extension. To retain the current Settings, the
“Resources Backup” Tool can be used to Backup and Restore the Settings in a Folder on
the Harddisk. The Tool can be started from the System 800xA Configuration Console
under Minerals Library, “GraphiXs Configuration Settings”.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 106
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

NOTE: for Upgrades from Versions earlier than 5.1/5, the Tool can be started from the
Installation Folder “C:\Program Files (x86)\ABB Industrial IT\Control IT\ Minerals
Library\ResourcesBackupApp\ResourcesBackupApp.exe” directly only, after the new
Minerals Library Version is installed.
The Resource Aspects that shall be stored can be selected from the following Options:
Available Resources Description
Minerals Library NLS The Standard Library NLS Aspects.
Minerals Library Extensions NLS NLS Aspects for Extension Libraries included in the Standard Installation.
NLS for the EnergyMgmt Extension. These Aspects are not part of the
Minerals Library EnergyMgmt NLS
Standard Installation, choose this Option only if EnergyMgmt is installed.
The Project Specific Alarm and Interlock Texts stored at
Project Specific NLS
MineralsProj_NLSID
Minerals Library Colors The Standard Library Logical Color Aspects
The BMIYardAndPort Library Logical Colors. This Aspect is not part of the
BMI Yard and Port Extension Colors Standard Installation, choose this only if the YardAndPort Extension is
installed
The Logical Color Definitions from the 800xA System Installation. These
800xA Standard Colors Aspects are not overwritten by the Minerals Library during Upgrade, and
therefore don’t need to be restored.
The Settings from General Properties Aspects in the
Minerals Library Settings
BMI_GraphiXs_Customization Library.

The Files are stored on the local Machine where the Resources Backup Tool is executed.
The Default Location is “C:\ABB Industrial IT\Minerals Library\ActiveConfiguration”.
All the Settings will be overwritten during the Library Upgrade while importing the System
Extensions, but can be restored to the local Versions by restoring the Backup after the
Upgrade.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 107
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

17.3 Installation Procedure for Upgrades from Versions 5.1/2 and older
o For the Primary Aspect Server only, execute the following procedure:
· Remove an existing Minerals Library Installation with “Add or Remove Programs”
tool of Windows
· Check that the below folder does not exist or remove it.
· C:\Program Files\ABB Industrial IT\Control IT\Minerals Library
· Install Minerals Library 5.1/2 MineralsLibrary.msi
· Restart the Server
· Use Configuration Wizard and run System Extension Maintenance for the
Minerals Extensions
· Use Configuration Wizard – Maintenance - Stop all process associated with
ABB 800xA Base
· Remove an existing Minerals Library Installation with “Add or Remove Programs”
tool of Windows
· Check that the below folder does not exist or remove it.
· C:\Program Files\ABB Industrial IT\Control IT\Minerals Library
· Install Minerals Library 5.1/2a: use MineralsLibraryUpgrade.msi as found on the
Minerals Library CD
· Restart the Server
· Use Configuration Wizard and run System Extension Maintenance for the
Minerals Extensions
· Proceed as for new installations

17.4 For New Installations and Upgrades from Version 5.1/2a and newer
o Use Configuration Wizard – Maintenance - Stop all processes associated with ABB
800xA Base. Close all Plant Explorer and Operator Workplaces on the Node.
o Remove any existing Minerals Library Installation with “Add or Remove Programs” tool of
Windows
· Check that the below folder does not exist or remove it:
C:\Program Files\ABB Industrial IT\Control IT\Minerals Library
o Run the MineralsLibrary.msi and follow the instructions in the dialog to install the Library
o Restart the Node
o On the Primary Aspect Server only, execute the following Procedure:
· for new installations, use the Configuration Wizard, System Administration,
“System Extension Load” to load the following System Extensions:
· Minerals Library Common and GraphiXs
· Minerals Library Status Viewer
· Minerals Library AC800
·
Minerals Library AC800 LogConfig
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 108
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

· for upgrades, use Configuration Wizard, System Administration, System Extension

Maintenance or System Extension Load Option. Depending on the Version of the
Library the System is upgraded from.the entries will always only show up under
one of these Options. Note that loading the Extensions in the wrong order is not
possible and checked for by the Configuration Wizard.
· Minerals Library Common and GraphiXs
· Minerals Library Status Viewer (found under “System Extension Load” !)
· Minerals Library AC800
· Minerals Library AC800 LogConfig, in case no manual changes have
been made to the Log Configurations settings, otherwise skip this step and
compare and load the .afw Files for the Log Configurations manually
instead.
· Minerals Library Legacy Libraries if these Libraries are required in the
Project only (for Upgrades).
· Minerals Library Visual Basic, only for Upgrades in case Visual Basic
Graphics are still used, this also requires the AC800M Connect VB
Graphics Extension to be loaded. NOTE: VB is only supported for
Conversion of old Graphics, not for Operation!
o Load any Patches supplied with the CD or available from the Minerals Library ftp server

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 109
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

17.6 Post-Upgrade Procedure

Restore the Settings with the Resource Backup Tool from the Location where they were
stored during the Pre-Upgrade Procedure. Click on the “Restore” Button to start, a
Difference Report Window will come up for each selected Resource.

Make sure all differences are selected and click “Proceed” to write the changes to the
System.
NOTE: For NLS Aspects, only one Language can be restored at a time by selecting the
needed Language in the Difference Report Window. To handle Aspects with multiple
Languages please run the Tool multiple times until all the needed languages have been
restored.
It can happen that a License Error Message shows up in the Graphic Displays, as in the
following Figure, directly after updating the System Extensions or after restoring the
Settings with the Resource Backup Tool. Restarting the “Minerals Library License Service”
on the Primary Aspect Server (My Computer Context Menu – Manage – Services) should
resolve the issue immediately. In case the issue persists, check for any Error Messages in
the Windows Event Log for the Minerals Library License Service and contact support
([email protected]).

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 110
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

18. BMI Library 5.0/1 Upgrade Hints

1. VERY IMPORTANT: Notice that upgrades from versions before 5p0s0b9 (5.0/0 b9)
and also all 4.1 versions cannot be done in a running plant. A plant shutdown must be
done in order to perform the upgrade.
2. IMPORTANT: For fast PCC indication on the FPL the OPC Server Update Rate for
text must be changed from 10000ms to 1000ms!
3. In order to make the PCC working in an existing application you have to connect the
Consumer Objects PCC variable in all the PCC parameters of IO objects.
4. Please note that when you import an existing application some small adaptions are
required. The red triangles in the CBM will guide you.
5. StepOneGroup and StepTwoGroup had some of its parameters removed and new
added because of the new PCC bus. This will require considered efforts to be
corrected.
6. Log Configuration Upgrade. The new library brings new signals to be added in the
AIS/AIC Objects under the Log Configuration Aspect. In a upgrade of an old library,
these aspects may not be updated. Follow the procedure in the next chapter to correct
this.
7. Be aware that in every existing Control Module the mapping is not modified: the former
EnTest Parameter will disappear and the former EnLoc will act for the Local Mode.
8. If you want to use the new 6 alarm delays feature in the AIS and AIC, set the constant
EnIndividualAlarmDelays located at cBMI.AIS Project Constant in BMIConstAndVar to
true before the first download in order to have the actual alarm delay copied in all
L1,L2,H1 and H2 alarm delays.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 111
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

18.1 Log Configuration Upgrade

This upgrade is required when upgrading from any Minerals Library Version below
5.0/0B12.
Hard disk size considerations:
The new log definitions require approx. 3 times more space than the existing one. Please
consider this by checking the size of the history folder located under
…\OperateITData\History\{Provider ID} on every connectivity server.
1. Create a backup of your Control Structure including dependencies.
2. This procedure must be done only once in the Main Aspect Server after all the
installation of the new library version.
3. Stop the Basic History Service

4. Backup of the history files. Copy the directory …\OperateITData\History\{Provider ID}

from every connectivity server to a safe place.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 112
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

5. In the Library Structure deactivate the BMIStandardExt_AICLog library and click the
button Apply.

6. Repeat the last step as well for the BMIStandardExt_AIS Library

7. In the Control Network Object, create the aspect “Log Summary”.

8.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 113
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

8. Check in the list if it can be found some AIS or AIC. If yes, right click button and select
“Delete”. Do not delete other than AIS and AIC Log Configurations in this step!

9. Activate BMIStandardExt_AICLog and BMIStandardExt_AISLog Library again

10. Re-start the Basic History Service.
11. Wait approx. 10minutes until all history files are created. This can be checked by
looking at the number of files growing in the history folder
…\OperateITData\History\{Provider ID} on the connectivity servers.
12. Open the AdvHtArchiveTool, found in the product bin directory, located by default at:
c:\Program Files\ABB Industrial IT\Operate IT\Process Portal A \bin

13. Use the File/Select/open Archive command and point to the backup directory that was
created under item 4.
14. Use the Action/Validate Item command, were status of the individual History data logs
will be displayed.
· Validate the results. If all History data logs shows good status, continue with next
step 16.
· Use the Action/Repair Item References command - This will repair the files with
bad item references.

15. Use the Action\Insert Data into logs command and the data will be merged into the
existing logs.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 114
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

18.2 Rollup Upgrades

Before upgrading to System Rollups, it is important to take into account the possibility of
having problems with old graphic references in graphic display. This can lead to problems
of not having the graphic display available for operation.
There is a procedure which is strongly recommended to be followed in order to avoid this
problem.

The following steps below (1-7) must be followed for each graphic display in the running
system (including overlap displays)
1. Open the graphic display in edit mode.
2. In the toolbar click Aspect -> Components.
3. Try to unselect each of the components listed. The following picture is just an
example.

4. If the following message appears, jump to the next component. This means that the
component is being used in the current graphic display.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 115
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

5. When you find some not used component, the list will appear like that after you tried to
unselect.

6. After finishing the list search, click ok and deploy the graphic display.
7. Repeat steps 1-6 for each graphic display.
8. In order to be sure that you have the latest references deployed in your system before
the Rollup upgrade, run the Display Tool (link below) and select to deploy all the
graphic displays in the list:

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 116
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

19. BMI Library 5.0/2 Upgrade Hints

19.1 Group Uploader / PCC Uploader

StepOneGroup, StepTwoGroup as well as PCC_Connect Function Blocks are now
instantiated as Aspect Objects by default when a new Block is inserted into the editor. For
existing Function Blocks, the Property “Aspect Object” has to be set manually in Control
Builder M for Group Uploader / PCC Uploader to work.

StepOneGroup and StepTwoGroup Blocks “Name” Parameter was changed to

“StepName” so that the Name Uploader does not change the Name of the Function Block
to be the same as the Control Module that is controlled. This change needs to be done for
all instances of these Blocks in Control Builder M.

PCC_Connect and PCC_Connect_2 Blocks have an additional Parameter “Name” which

is propagated Back to the Signal Blocks connected via PCC Bus. Beside PCC Uploader,
they are also used to link from the Signals Faceplates to the connected Drives. For all
these Blocks, a new, unique Name has to be added in Control Builder.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 117
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

19.2 Alarm & Event List Viewclass

If updating from an older Version of BMI Library, check if there are two “Main View”
Aspects of Category “Viewclass Values” found on the Alarm & Event List Viewclass. The
one with id {9007542b-5a4c-4003-8b2b-c39738eac9a3} should be deleted in this case.
However, make sure to move system specific changes which were done manually in this
Aspect to the new one.

19.3 Connected Constants to LcbRem

CBM gives a Compiler Error on constants connected to LcbRem Parameter in Consumer
Control Modules. This is because a new LCB Type is writing to this Parameter. Existing
Plants can think about deleting the (in this case not needed) Code for LCB Type 5 in
BMIAdaptions Library as a workaround.

19.4 Changed Property Attributes for Forcing of Values in Signal Control Modules
The needed Permission for forcing Values is still “Supervise”, but it is set now correctly on
IO.Signal.Force resp. IO.Signal.IOValue and not IntPar.Force anymore. Please update all
your “Property Attribute Override” Aspects that overwrite IntPar.Force accordingly. This
concerns all IO Control Modules as well as PIDCtrl (MV.Force).
Also note that per default, AOC, AOS as well as DOC, DOS still do not require Supervise
Permission for changing the IOValue but only for toggling the Forced Bit.

19.5 PCC Bus changes

Disconnecting the PCC Bus does now correctly initialize IO.AEListEn in Signal Control
Modules. However, if Signal Blocks connected via PCC Bus are run in a different (faster)
Task then the Parent (Drive), the AIS will disconnect after download and immediately
reconnect. Note that using PCC in such a configuration is not supported.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 118
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

19.6 IO.Out.Run definition changed, Run Indication on Graphics changed from IO.Out.Run to
StatusRun Variable
IO.Out.Run is no longer true in case of Forced Run. Please check that your plant does
not rely on this, especially if some drives do use the Forced Run Mode (direct start without
an Order coming from the system) in normal Operation.
Because the Run indication was changed to a different Variable, all deployed Graphic
Elements will show the Motors as off until the new Code is downloaded to the Controller.
Therefore, it is advisable to minimise the Time between the first download to the
Controller and deploying the Graphic Displays after the import of the new Library. (Note
the changes needed in the Control Builder Code for PCC_Connect and StepOneGroup!).

19.7 Additional EnExtLimits Parameters on PIDCtrl

Three new Parameters were introduced to allow for more detailed selection of external
Parameters:
Param.Name affected Parameter Description old Param.
EnExtPID_Offset PID_Offset Offset for P/PD Ctrl EnExtPIDSettings
EnExtSPLimits SP_HiLim, SP_LoLim Min/Max for Setpoint in EnExtLimits
EnExtOutLimits OUT_HiLim, OUT_LoLim Min/Max for OUTP in EnExtLimits

Note that these Parameters are initially true and should be connected to the same
variables or set to the same Values as the old Parameter mentioned in the Table above
for existing Plants.

19.8 New NLS Texts

New “MineralsLib 5_0_1 AddOn Customization” and “MineralsLib 5_0_1 Counter AddOn
Customization” Objects in Library Structure hold the new NLS Texts that were added for
the new Release. Check and add all languages needed on your Plant.
New NLS Texts for the ALP1_SubTxt, ALP2_SubTxt and ALP3_SubTxt (“Warning” resp.
“Failure”) had to be introduced to show the correct Text in GroupStatusViewer and PCC
Viewer. These should be kept equal to the corresponding Project Constants found in
cBMI.AE!

19.9 Compiler Switches for CBM 5.0/2

Remove the warning from “Multiple calls to the same FB” in CBM Compiler Switches, as
else you will get multiple warnings on different BMI Library Modules…

20. BMI Library 5.1/0 Upgrade Hints

20.1 Graphics Migration

Also see chapter “Migration Errors” in “Graphic Migration Tool” Documentation
(3BSE049231R5022)

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 119
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

20.1.1 Deploy of Process Displays

All Graphic Displays must be deployed using the latest Library Version before the
Migration.

20.1.2 Aspects of Type “BMI Base Display” or “BMI Overlap Display” are not migrated
In the VB6 Graphics Migration Tool - Preferences set BMI Base Display and BMI Overlap
Display to be mapped to Graphic Display PG2 Aspects.

20.1.3 Graphic Elements of wrong Aspect Type are not migrated

As with VB it was possible to connect Graphic Aspects of the wrong Type to an Object by
manually typing the Objects Name. It could happen that, for example, an AISBar was
shown for an AIC Object (instead of an AICBar). In this case, an Error like “Failed to
migrate contained element ‘AISBar1’ because the base element (AIS:AISBar) was not
resolved” is shown. These Elements need to be re-inserted manually.

20.1.4 Logical Colors connected to static Elements are not migrated

The Graphics Migration Tool loads Colors configured in the Properties as Integer Values,
but Colors configured in the Expression Editor as Color Values. As there is no possibility
to get information about the data type during migration, no automatic conversion can be
done. Colors connected in the Expression Editor are therefore lost and need to be
reconnected manually.

20.1.5 Migration Error “Guid should contain 32 digits…” on AspectLink Control

AspectExt.ocx AspectLink VB Control is mapped to 800xA’s own Aspect Link which
obviously can not work. There is no known workaround, existing Controls of this Type
need to be reinserted manually after migration.

20.1.6 Properties of data type string containing special characters are not migrated
Properties of data type string containing special characters, such as quotation marks, are
not migrated.
These properties must be set manual after migration. The delimiter “\” must be set before
a special character. E.g.: “Valve \”Open\” “

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 120
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

21. BMI Library 5.1/1 Upgrade Hints

21.1 800xA version requirements for BMI GraphiXs Extension 5.1/1

800xA 5.0.0 SP2 RevC must be installed. This includes the 800xA SP2 Graphics
Extension 5.0.2/0 RU2d.

21.2 800xA Graphics Extension issues

21.2.1 Blinking colors in PG2 aspects can freeze

Concerns 800xA 5.0.0 SP2 RevC or older versions.
Blinking colors can freeze on PG2 graphic displays. If this occurs, the display can not be
edited with the Process Graphics Editor when Live Mode is set.
To avoid this problem, reboot nodes displaying PG2 graphics every 20 days.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 121
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

22. BMI Library 5.1/3 Upgrade Hints

22.1 Changes in the Alarms handling may cause reactivation of time delayed alarms
For performance reasons the following functions have been changed
· AlarmCond -> AlarmCondBasic
· Timer FBs -> Timer variables
The change will cause timers to restart, thus time delayed alarms and interlocks will be
reactivated after the time has elapsed only.
For critical process we recommend the plant to be in a safe state before the upgrade.

22.2 PreBinTask
The new Parameterized PreBin requires a PreBinTask, for the application similar to the
FastTask. The recommended settings:
TaskName: PreBin
IntervalTime : 2000ms
Priority: 5 - Lowest

22.3 LCB Types

If LCBType 6 is used in the current project the new project constant
cBMI.*.FieldStopIfNotRemOrLoc has to be set to False after the upgrade.

22.4 MNSiS MOTP

SerialLink.M1 was not used before because only 2 MAlarms were available. As now
MOTP supports all 3 MAlarms also SerialLink.M1 is connected to the MOTP.
Therefore the new project constant cBMI.MNSiS_MBTCP.DisableM1forMOTP has to be
set to True if upgrading from earlier versions in case this input was not used in the
MControl.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 122
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

22.5 PG2 incompatibilities of Data type changed from Real to Float

A Warning in diagnostic tool shows: Data type changed from Real to Float.
To remove this message, edit and save the following Generic Elements PG2:
o Standard Symbols, BMI_ValueAndUnitInd
o Basic Symbols, BMI_DragVertical
The aspects are located in the Object Type Structure.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 123
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

22.6 General default for colored line on top of pre-selection button has changed to disabled
Details see Minerals Library Overview Manual Chapter “Workplace Specific Settings”

BMIngColorBarPreSel Enables the presentation of a colored line 0 / 255 0 = disabled

on top of the Pre-Selection button. The
color can be set by the logical color
“BMIngButtonBarPreSel”. The idea of the
color is to differentiate between the different
types of buttons on the screen.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 124
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

23. BMI Library 5.1/3a Upgrade Hints

23.1 PG2 incompatibilities of Data type changed from Real to Float

A Warning in diagnostic tool shows: Data type changed from Real to Float.
To remove this message, edit and save the following Generic Elements PG2:
o Standard Symbols, BMI_ValueAndUnitInd
o Basic Symbols, BMI_DragVertical
The aspects are located in the Object Type Structure.

23.2

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 125
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

23.2 PID Tune and TuneRes

When installed in SV5.1 the following VB based Faceplate Elements for the PIDCtrl
Object will create errors:
- Tune
- TuneRes
These two Aspects can be deleted from the Object Type Structure.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 126
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

24. Minerals Library 5.1/4 Upgrade Hints

24.1 BMI_WeighfeederLib and BMIUserDefined

The Libraries BMI_WeighfeederLib and BMIUserDefined have not been updated for use in
the new Control Builder Diagram Editor and are not included in the Standard Installation
anymore. They are therefore moved to the “Minerals Library VB Graphics Extension” and
also found on the Minerals Library Installation CD as separate .afw Files and can be
imported if needed for New Projects using Single Control Modules.

24.2 StartInhibit uses Started instead of Run from Parent

Basic Objects (e.g. AIS/DIS) now use the PCC “Started” Status from the PCC Parent to
Enable / Disable the Alarm and calculation of the Start Inhibit Time for the Interlock. This
will shorten the Start Inhibit Time by the Time the Drives needs to Signal back Run after
Order is sent out, and should therefore be considered for Consumers where a long
FdbckTime is configured. This behavior can be changed with the Project Constant
cBMI.PCC.UseStartedForStartInhibit.

24.3 New Colors in “BMI NG Symbol 2 Colors”

The “Logical Color Values” Aspect “BMI NG Symbol 2 Colors” contains new Colors for
Starting and Stopping State of the Consumers. If the colors shall be overwritten with the
old Values after an Upgrade, make sure to keep the new Version of this Aspect, and
manually reapply any changes to it if needed.

24.4 PCC_Connect DrivePCC Ports have changed from Type In_Out to Out
The Port Type of the Extensible Port DrivePCC[] has changed Type from in_out to out. If
PCC_Connect was used in Function Block Editor (Single Control Modules), these Ports
will be shown with Red Color in CBM and need to be re-connected after the upgrade.
Also, if multiple PCC_Connect were connected to the same consumers, these need to be
located on the same POU (Code Page), otherwise CBM will report a Loop in the Control
Code.

24.5 SPIntPar as Parameter

The MOT1_VVVF IntPar.Setpoint and Limits have changed Positions to a Parameter
called SPIntPar. Therefore it will not be possible to change the Setpoint of the
MOT1_VVVF from the Faceplate in the Time between the import of the System Extension
and before the new Code is downloaded to the Controller.

24.6 Remove VB Faceplates and Graphic Elements (after Migration to PG2)

For Upgrade Projects (migrated from VB Graphics) that are not using the VB Graphics
anymore, it is possible to not install/import the Minerals Library VB Graphics System
Extension. However the old VB Aspects will still be kept on the Object Instances. To get
rid of the actual Aspects, the relevant Library Extension need to be manually set to
“Inactive” in the Aspect System:

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 127
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

This concerns the following Extension Libraries for Standard Minerals Library:
BMIStandardExt_VB, BMIStandardExt_VB_FPL
BMIEnergyExt_VB, BMIEnergyExt_VB_FPL
BMIUserDefinedExt_VB

24.7 Remove Obsolete Aspects from Minerals Library

When upgrading the Library on a System Version 5.1 with Feature Pack 4, importing
“inactive” Libraries does not work anymore. Instead the user has to set the Libraries
inactive himself for removing the Aspects from the Object Type. This Step is only needed
in case the System is upgraded from a Version before 5.1/2a on an Aspect System with
Feature Pack 4. It is possible to check if this Step needs to be done by searching the
Aspect “BMI Common Properties not used” of Type “General Properties” on the
BMIStandard “Library Version” Object in Object Type Structure Object Types/Control
System/AC 800M/C Connect /Libraries. If the Aspect is existing the following Extension
Libraries, delivered as external .afw Files with the Minerals Library CD, need to be
imported by the User. After that, these Extensions need to be manually set to Inactive -
similar to the VB Extension Libraries as described in 24.6 - to remove the Obsolete / not
used Aspects from the System:
BMIStandardExt_Obsolete
BMIEnergyExt_Obsolete

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 128
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

25. Minerals Library 5.1/4a Upgrade Hints

25.1 Communication Error in GCC_Com_M because of changed GCC_ComData

GCC_ComData Data Type has been changed and Groups will be not Ready for start
during Upgrade in case there are GCC_Com Blocks used between different Applications
that are not downloaded at the same time. As a workaround, assuming no Groups need to
be started or stopped while downloading all upgraded Applications, it would be possible to
configure the GCC_Com_M Block with the ComErrCtrl Parameter to keep sending the last
Values to the Group during Communication Error.

26. Minerals Library 5.1/5 Upgrade Hints

26.1 PCC Interlock to Groups now active

PCC Interlocks connected to IOGrpDrvCon.PCC on the GROUP Control Module were not
supported on earlier Releases but do now stop and/or prevent the start of the Group. This
means if any PCC Signals are connected with configured Interlocks these need to be
checked.
It is possible to get the old behavior by using a PCC_Connect with a Mask of or a
PCC_Inlk with InterlockType “NoInterlock”.
Upgrade Projects can also set cBMI.Group.DisablePCCInterlocks to disable this feature
for the whole Project.
In case a Group is connected via PCC_Connect to Signal Blocks with StartInhibit Time
set, note that the “Started” state of the Group will now also activate the Start Inhibit Timer
already.

26.2 Replacement of BMILib_Weighfeeder with RecipeControlBase

It is required to replace the WeighfeederLib with the new RecipeControlLib for completely
replacing the VB Process Graphics in the System – the BMI_WeighfeederLib will not be
updated to support PG2 Graphics. This step does however not need to be done before or
immediately after the Upgrade as the BMILib_Weighfeeder is still provided with this
Version.
Refer the 06 Dosing Objects Manual for a Comparison of the Blocks.

26.3 Blocking on AIS, AIC and DIS with Active Signal Error
If during the upgrade, any AIS, AIC or DIS has a Signal Error and is configured with
ErrCtrl = true, the Signal Blocked status will not be reset once the Signal Status changes
to Good State again. The Block needs to be removed manually from these Signals via the
Faceplate. This issue happens only for Signals that are in Signal Error Status during the
Download of the new Code Version to the Controller.

26.4 DIS/DIC with ValTr = -1 and WarnValTr = -1

DIS/DIC with ValTr smaller than 0 (-1= no AE) have changed behaviour for the Alarm,
IO.PreWarning and IO.Signal.Normal are now calculated always and PCC Interlocks are
working. In case any DIS/DIC are used as PCC Interlocks without Events, these Interlocks
were not active earlier but will now be executed.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 129
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

26.5 PCC_Intlk Control Module Behaviour Changes

PCC_Intlk IO.Out.NoInt_IAStart / IBStart and ICStart Outputs are now always “false”in
case the corresponding non-“Start” Interlock is false. This is just opposite to the earlier
behaviour of keeping the Start Interlock Output always true. Glue Logic using these
Outputs should be checked if there is any
PCC_Intlk StartInhibit Time is now applied before the Alarm and Ready Delay similar to
the DIS behavior. The Interlock will now as well be reset immediately after the Consumer
Trip (StartInhibit applied again) and only the Indication is kept – existing PCC_Intlk Block
need to be checked for any use of IntlkStartInhibit > 0s together with Delay Times > 0s.

26.6 PCC Direction FB Interlock

There was an Error in 5.1/4a and earlier that disabled the “FB” Direction of the PCC
Interlock. This means that the behavior of existing Code using “FB” for PCC Interlocks
could change because the IO.Out.Run / PosX / PosY will now correctly wait for the Signal
to be active and we therefore recommend to check any existing PCC Interlocks using the
FB Option.
The FB Feature on PCC is supported by the following Consumer Objects: MOT1, MOT2,
MOT1_VVVF and MOT2_VVVF. Note that configuring the FB Option for a Signal
connected to a Consumer Object that doesn’t support it is not indicated as PCC Param
Error, but the Option is just ignored by the Consumer Object.

26.7 PCC_Intlk StartedState Parameter replaced by Status_StartedX and Status_StartedY

The Parameter StartedState has been removed from the PCC_Intlk Block. On the
Upgrade, a Signal that was connected to this Parameter should now be connected to both
the new StartedX and StartedY Parameters.

26.8 DriveGroup IO.In.EnSeqStartY initial Value false

For the Parameter IO.In.EnSeqStartY on the DriveGroup, in earlier Versions the Default
Value was “false” which means the Group would wait on the Step. This was however not
checked – the DriveGroup required only one of EnSeqStartX or EnSeqStartY true. In the
current Release this has been corrected to always check that the currently active
Preselection matches as well before Starting which means that all Groups that contain
DriveGroups that use Direction Y/Reverse could get stuck on this Step after the Upgrade.
This can be corrected by simply setting all the IO.In.EnSeqStartY Parameters to true once
online on the Controller directly after the Upgrade for all DriveGroups.

26.9 Process Panel for DriveGroup

The Cmd Constants for the DriveGroup have been changed in this Version and existing
Panel Configurations are not compatible for the DriveGroup. In case the Panels shall not
be changed, the Project Constants cBMI.ProcessPanel.DriveGroupCmd could be
adjusted to match the Values from cBMI.ProcessPanel.GroupCmd in order to be
compatible to the old behaviour.

26.10 New Extension for Log Configurations on BMI_ACS8x0 and BMI_UMC100 Libraries
The Log Configuations have been moved to Extension Libraries to allow for customized
Log Templates. During the Upgrade, this means that the Log Configurations on these
Items (History for Current, Power and Torque resp. Current and Thermal Values) are
deleted while importing the AC800 System Extension and recreated while importing the
AC800 Log System Extension only. The existing historical Data for these Logs will be lost.
Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 130
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

26.11 “DataTreeView” Aspect on VVVFSerial in BMIUserDefined

The Aspect DataTreeView of Category Graphic Element on the Object VVVFSerial (in
Object Type Structure/Control System/AC 800M/C Connect/ Libraries/ BMIUserDefined/
Control Module Types”) shall be deleted. To do this it, set the Library state for the
“BMIUserDefinedExt_VB” Extension Library to “Inactive”.

27. Minerals Library 5.1/5a Upgrade Hints

27.1 Upload the Functional Structure

The old “HTML View AC” Aspects created with Group Uploader and PCC Uploader are
obsolete. To have the Group and PCC Viewers working, a complete Upload needs to be
performed in the Functional Structure under the “Minerals Library Automatic Upload”
Object. Note that the Upload still requires all Controllers online with working OPC Data
Connection and up to date Name Upload.
This will insert the Control Modules into Functional Structure and create the logical
Structure of the Control Application. In addition to the Viewers Content, this also
influences the Alarm and Event List filtering.
NOTE: on deletion of Objects, Control Builder will check and report an error “Object is
linked into another Structure” if the Object is still inserted into Functional Structure. To be
able to delete Objects from Control Builder, the “Functional Structure” Aspects need to be
deleted first from the Object in Plant Explorer. When using Engineering Workplace, it is
possible to delete the Object via the “Delete from all Structures” Command in the Context
Menu under “Advanced”:

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 131
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

27.2 Change in GCC_ComData Type

Because the transferred Datatype changed, there can be a Communication Error for
Variables transferred between Applications. In the default Configuration this means any
Group using GCC_Com_M or _S Blocks will be not Ready for Start while only one side of
the Connection is downloaded with the new Library Version.

27.3 Configure PCC Viewer for Group without Interlocks

If the cBMI.Group.DisablePCCInterlocks Project Constant was set to true as described in
Section 26.1, the PCC Viewer will still show the Interlocks connected via PCC even if
these have no effect on the Group. For this configuration, copy the Aspect “PCC
Interlocks Unsupported Configuration” In Object Type Structure from Root/ Control
System/ AC800M/C Connect/ Libraries/ BMIStandard/ Control Module Types/
GrpCycleCtrl to the GROUP Object to hide any configured Interlocks in the PCC Viewer.

27.4 Upgrade Configuration from old ConsumerExt01 to new Extended Info Viewer
With the replacement of all VB Aspects, the old Extended Info Viewer is as well removed.
If Project Specific Libraries are using the ConsumerExt01 Aspect (Extended Info Button in
Faceplate), they were configured with “HTML View AC” Aspects on the Wrapper. These
“ConsumerExtConfig” Aspects are not supported anymore and need to be replaced with a
new Aspect of Type “Minerals Library Extended Info Configuration Entry”. Please refer to
the Manual “14 Minerals Library Wrapper Objects” for the detailed Description of the new
Aspect.
As the Format of the Configuration is very similar, simple Copy and Paste of the content
will work for most cases. For this, an Excel Macro “ExtendedInfoConfigurationExport.xlsm”
is provided which will read the existing Configuration by running the Macro
“GetConfiguration” (depending on the Office Version, via e.g. View -> Macros -> View
Macros…). After that, the “NewFormat” Sheet will contain the Configuration that can be
manually pasted into the new Aspect that shall be created on the same Object as the old
ConsumerExtConfig.

27.5 Uncheck “Check for publisher’s certificate revocation” Option (800xA SV 5.1 only)
For Clients without Internet Connection, opening a Viewer (Group Step Viewer, PCC
Viewer etc.) for the first time in a newly started Operator Workplace will have a delay of
over 10 seconds. This only happens if the Client does not have an Internet Connection.
To remove this Delay, it is possible to de-select the Option “Check for publisher’s
certificate revocation” in the Internet Explorer Tools Menu, Internet Options, Advanced
Tab. NOTE: We don’t recommend to uncheck this Option if the Node is connected to the
Internet, and this issue does not affect System 800xA SV 6.0.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 132
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

28. Minerals Library 5.1/5b Upgrade Hints

28.1 New OUTCC Port in PIDCtrl

Because new internal Variables are used for Range and Unit of the OUT Value, after
importing the updated System Extensions, it will not be possible to change the Out Value
of the PIDCtrl in Manual Mode until the changed Application Program is downloaded to
the Controllers.

28.2 PIDCtrl Balancing Time on Signal Error changed

Instead of the cBMI.Time10s constant, the new cBMI.PID1.SigErrBalTime constant is now
used for the Balancing Mode Timer. In case the old Constant has been changed in the
local Control Project from the default of “10s”, set this value for the newly added constant
as well to get the same behavior.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 133
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

29. Upgrading NLS Resources from VB6 to support PG2 Graphics

The procedure to upgrade NLS pointers for PG2 graphics contains the points listed below:
1. Copy existing “Alarm and Event Translator” aspects to the new objects named
MineralsProj_AE_NLS and MineralsProj_IL_NLS.
They are stored under “[Library Structure] / Preferences and Customizations”.
2. Make an XML Data extract for these two aspects. The XML Data Extract and Load
tool you will find in the second tab on the NLS pointer aspects.

3. Open the XML file with a text editor and change prefix to NLSID. As shown below:
<NlsPrefix>NLSID_</NlsPrefix>
4. Load the changed XML files into the “NLS Resource Manager” aspects called
BMI_Proj_IL_NLS and BMI_Proj_AE_NLS.
Now, your Alarm and Event texts and Interlock texts are fully NLS supported in PG2
graphics as well.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 134
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

30. Problems and known Bugs

30.1 ABB_REF542Plus: Aspect CBValueAndUnit

Pull Down Menu for “CBValue” shows “Voltage L32” instead of “Voltage L31”.

30.2 LateBoundViewRef problem with AspectLinkCore

The LateBoundViewRef function is not working when used with the AspectLinkCore
button connected to AspectViewReference property.

30.3 GCC_Com does not support GrpCycleCtrl

The GrpCycleCtrl GrpDrvBus cannot be extended to multiple Diagrams with
GCC_Com_M and GCC_Com_S. All Consumers connected to a GrpCycleCtrl need to be
in the same Diagram or controlled via GroupStep sending only the start and stop
commands to the other Diagram.

30.4 Loops with PCC_Connect and/or PCC_Treshold in Single Control Modules

In case multiple PCC_Connect and/or PCC_Threshold are used for the same Motor (PCC
Parent), they need to be placed into the same POU (Code Tab) or else a Loop will result
when the Compiler tries to sort the Control Code.
The same Problem does not exist for the Diagram Editor (CBM FD Editor).

30.5 Multiple Connections between Signals and Cosumers via PCC_Connect

With using multiple PCC_Connect connected to each other, it would be possible to build
structures with multiple Connections to the same Consumer (e.g. MOT1) that carry PCC
Information from the same Signal. Such structures will not be supported by the PCC
Viewer and the Viewer will not correctly indicate the Masked and Enabled Interlocks for
these Configurations. There shall only exist maximal one Path between a Consumer and
any Signal, when following the PCC Connections from the Consumer through the
PCC_Connect, PCC_Connect_2 and PCC_Connect_6 Blocks.

30.6 PCC Alarm / Interlock Limitations in the current Release

Additionally to the Description in the Manual for the allowed PCC Combinations (see the
Manual 02 Basic Objects) following should be considered:
Direction X is used for Interlocking the VLVNO1 Started (= Closed) State. VLVNO1 does
not support the LocalStartInhibit Option.
The IntlkStartInhibit Delay Time does not take the Directions into account. This means
that e.g. an Interlock with DirX will still be activated after the configured Time Delay even if
the Drive is running in Direction Y.
DirFB Interlocks are only supported for MOT1, MOT2, MOT1_VVVF and MOT2_VVVF
Blocks, the GROUP, MOTP, VLV1, VLVNO1 etc. Types are not supporting this option,
which means the Run resp. PosOpn / PosCls will not be delayed until all FB Interlocks are
true. PCC “FB” Direction cannot be used to replace Limit Switches.
Using Dir_noAck with a configured IntlkStartInhibit Delay is not working as expected. The
DIS and AIS Blocks are keeping the Alarm Active while the Signal is not Acknowledged,
therefore the “noAck” Option on the Direction Parameter will have no effect if a StartInhibit
Delay is configured.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 135
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

The IA_Process Interlock will indicate the Drive not Ready for Start even if the Auto Mode
is enabled and therefore the Drive could be started (to Mode Auto - State Off) by the
Group. This means for an Auto-Start Consumer the Interlock IA_Process_RFS should be
configured always.
Interlock Type PD_PreviousDrive together with Direction Dir_Start is not tripping (to
Manual) if the Consumer is off in Auto Mode.
Alarms are only forwarded via PCC if the configured AlarmTr / WarnTr / LimxTr etc. is
greater or equal 1. Otherwise the Motor would still trip as per the configured Interlock but
the Tag would not be visible in the Faceplate.
Tagnames for Signals connected via PCC must not start with “%%” (two percentage
chars)

30.7 Code Sorting

Several Features of the Library depend on the correct sorting of Control Code, this means
that Loops in Control Code can break these Functions:
§ Pre-Selection Stand-by switchover
§ GCC_Com and PCC_Com Communication Modules
§ GroupConnect_2, 4 and 8
In General, the Control Code should not contain any Loops. For Control Builder Diagrams
Editor, this includes as well the Warning 1754 “There is no forward flow between the
blocks of the feedback connection”.

30.8 Blocked Value in case of Signal Error with ErrCtrl = true on AIS
For the AIS Control Module, the Value on the Hardware Channel will be blocked (forced)
during Signal Error as well in case ErrCtrl is set true. The Error Value itself is only applied
once when the Signal Error is coming up, but can then be changed from the Faceplate if
the Permission is given (Supervise Role) – this Permission is defined on the Value itself,
therefore the Permission to change the Value during Signal Error is the same as the
Permission to change the Value while the Signal is blocked.

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 136
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137
 We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Ó Copyright 2013 ABB. All rights reserved.

§ Revision Table
Rev. Page (P) Description Date
ind. Chapt.(C) Dept./Init.
0 All First issue 23-08-05/WSV
1 All Revision of description of changes in Version 5.0 20-09-05/WSV
2 Part Some new features and comments added 25-10-05/KN
Installation Guide for 5.0/0 Beta 1 added
3 All Revision of description of changes in Version 5.0 07-02-06/BN
4 All Revision and new features for 5.0 B11 release 08-11-06/WSV
5 All Added graphical changes in the objects 10-11-06/WSV
6 - Added Log Configuration upgrade hints in the chapter 13-02-07/WSV
upgrade hints.
7 - Added Rollup Upgrade hints in the chapter upgrade hints 30-04-07/WSV
8 - List of changes for BMI Minerals Library 5.0/1 27-06-07/MB
-Added process Panel function
9 Part Added 5.0/2 Parts for Beta Release 04-11-08/LK
K Final 5.0/2 Release 24-04-09/LK
L First 5.1/0 Preview Release for PG2 04-06-09/LK
M Release 5.1/0 including PG2, Licensing, System Ext 10-07-09/KN
N 1.0 System Versions added 21-07-09/KN
O Release 5.1/1 18-11-09/CT
P Release 5.1/2 02-04-2010/KN
Q Release 5.1/2a 07-06-2010/KN
R Release 5.1/3 05-07-2010/CT
Release 5.1/3 29-10-2010/TOP
Release 5.1/3 29-10-2010/KN
S 16. Release 5.1/3 Known Bugs 09-11-2010/TOP
T Release 5.1/3 Installation Procedure SV5.1 / SV5.0 03-01-2011/KN
U Release 5.1/3a 14-01-2011/TOP
11.0 New Installer 01-04-2011/TOP
17.3 LateBoundViewRef problem with AspectLinkCore 07-04-2011/TOP
V Release 5.1/3b 06-02-2012/TOP
All
W Release 5.1/4 20-02-2012/TOP
All 03-05-2013/LK
21.8 / 9 Add section about code sorting limitiations 10-05-2013/LK
X 20.x Add additional Upgrade Hints for 5.1/4 23-07-2013/LK
Y Release 5.1/4a 17-09-2013/LK
Z Release 5.1/5 18-08-2014/LK
AA Release 5.1/5a 24-02-2015/LK
AB Add a Hint about deleting Objects in CBM 10-03-2015/LK
AC Release 5.1/5b 26-06-2015/LK
Added “Check for publisher’s certificate revocation” hint

Doc. kind Release Notes Project Minerals Library, CoE Minerals & Cement
Title Minerals Library Release Notes
800xA Minerals Library version 5.1/5b
Document number Lang. Rev. ind. Pages 137
ABB Switzerland Ltd 3BHS 261745 en AC No. of p. 137