This document summarizes the specifications of an RF coaxial cable called the 5D-FB series. It lists the materials used in the inner conductor, dielectric, shields and jacket. It then provides the electrical characteristics including impedance, capacitance, velocity of propagation, and attenuation levels at various frequencies up to 3000MHz. The cable has low attenuation up to 2000MHz and can operate between -25 to 70 degrees Celsius.
This document summarizes the specifications of an RF coaxial cable called the 5D-FB series. It lists the materials used in the inner conductor, dielectric, shields and jacket. It then provides the electrical characteristics including impedance, capacitance, velocity of propagation, and attenuation levels at various frequencies up to 3000MHz. The cable has low attenuation up to 2000MHz and can operate between -25 to 70 degrees Celsius.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1
RF Coaxial Cable D-FB Series HONGSEN CABLE
5D-FB Construction
Item Material Diameter (mm)
Inner Conductor Bare Copper or Copper Clad Aluminum 1.80 Dielectric Foam PE 5.00 First Shield Bonded Aluminum Foil 5.20 Second Shield Tinned Copper wire Braid (70%) 16/7/0.12mm Jacket PVC or PE 7.50
Electrical Characteristics
Impedance (Ω) 50±3
Capacitance (pF/m) 82 ± 2 Velocity of Propagation (%) 82.0 Dielectric strength (KV) 1.6 V.S.W.R ≤1.3 Return Loss ≥ 20 Screening Effectiveness (dB) ≥ 85 Min. Bending Radius (mm) 35.0 Operating Temp. (ºC) -25 to +70
Attenuation ( @ 20 ºC )
Frequency(MHz) Max Attenuation (dB/100ft) Max Attenuation (dB/100m)